summaryrefslogtreecommitdiff
path: root/drivers/clocksource
AgeCommit message (Collapse)AuthorFilesLines
2020-01-27clocksource/drivers/exynos_mct: Fix error path in timer resources initializationMarek Szyprowski1-1/+13
[ Upstream commit b9307420196009cdf18bad55e762ac49fb9a80f4 ] While freeing interrupt handlers in error path, don't assume that all requested interrupts are per-processor interrupts and properly release standard interrupts too. Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 56a94f13919c ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27clocksource/drivers/sun5i: Fail gracefully when clock rate is unavailableChen-Yu Tsai1-0/+10
[ Upstream commit e7e7e0d7beafebd11b0c065cd5fbc1e5759c5aab ] If the clock tree is not fully populated when the timer-sun5i init code is called, attempts to get the clock rate for the timer would fail and return 0. Make the init code for both clock events and clocksource check the returned clock rate and fail gracefully if the result is 0, instead of causing a divide by 0 exception later on. Fixes: 4a59058f0b09 ("clocksource/drivers/sun5i: Refactor the current code") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()Tony Lindgren1-1/+0
[ Upstream commit 9bd34c63f5536c490c152833c77fa47f59aeade3 ] Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") started producing a warning for pwm-omap-dmtimer: WARNING: CPU: 0 PID: 77 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x2f8/0x388 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Idle): Data Access in Supervisor mode during Functional access ... __pm_runtime_idle omap_dm_timer_disable pwm_omap_dmtimer_start pwm_omap_dmtimer_enable pwm_apply_state pwm_vibrator_start pwm_vibrator_play_work This is because the timer that pwm-omap-dmtimer is using is now being probed with ti-sysc interconnect target module instead of omap_device and the ti-sysc quirk for SYSC_QUIRK_LEGACY_IDLE is not fully compatible with what omap_device has been doing. We could fix this by reverting the timer changes and have the timer probe again with omap_device. Or we could add more quirk handling to ti-sysc driver. But as these options don't work nicely as longer term solutions, let's just make timers probe with ti-sysc without any quirks. To do this, all we need to do is remove quirks for timers for ti-sysc, and drop the bogus pm_runtime_irq_safe() flag for timer-ti-dm. We should not use pm_runtime_irq_safe() anyways for drivers as it will take a permanent use count on the parent device blocking the parent devices from idling and has been forcing ti-sysc driver to use a quirk flag. Note that we will move the timer data to DEBUG section later on in clean-up patches. Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-By: Andreas Kemnade <andreas@kemnade.info> Tested-By: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04clocksource/drivers/timer-of: Use unique device name instead of timerGeert Uytterhoeven1-1/+1
[ Upstream commit 4411464d6f8b5e5759637235a6f2b2a85c2be0f1 ] If a hardware-specific driver does not provide a name, the timer-of core falls back to device_node.name. Due to generic DT node naming policies, that name is almost always "timer", and thus doesn't identify the actual timer used. Fix this by using device_node.full_name instead, which includes the unit addrees. Example impact on /proc/timer_list: -Clock Event Device: timer +Clock Event Device: timer@fcfec400 Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191016144747.29538-3-geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04clocksource/drivers/asm9260: Add a check for of_clk_getChuhong Yuan1-0/+4
[ Upstream commit 6e001f6a4cc73cd06fc7b8c633bc4906c33dd8ad ] asm9260_timer_init misses a check for of_clk_get. Add a check for it and print errors like other clocksource drivers. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191016124330.22211-1-hslester96@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05clocksource/drivers/fttmr010: Fix invalid interrupt register accessTao Ren1-31/+42
[ Upstream commit 86fe57fc47b17b3528fa5497fc57e158d846c4ea ] TIMER_INTR_MASK register (Base Address of Timer + 0x38) is not designed for masking interrupts on ast2500 chips, and it's not even listed in ast2400 datasheet, so it's not safe to access TIMER_INTR_MASK on aspeed chips. Similarly, TIMER_INTR_STATE register (Base Address of Timer + 0x34) is not interrupt status register on ast2400 and ast2500 chips. Although there is no side effect to reset the register in fttmr010_common_init(), it's just misleading to do so. Besides, "count_down" is renamed to "is_aspeed" in "fttmr010" structure, and more comments are added so the code is more readble. Signed-off-by: Tao Ren <taoren@fb.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05clocksource/drivers/mediatek: Fix error handlingFabien Parent1-8/+2
[ Upstream commit 41d49e7939de5ec532d86494185b2ca2e99c848a ] When timer_of_init fails, it cleans up after itself by undoing everything it did during the initialization function. mtk_syst_init and mtk_gpt_init both call timer_of_cleanup if timer_of_init fails. timer_of_cleanup try to release the resource taken. Since these resources have already been cleaned up by timer_of_init, we end up getting a few warnings printed: [ 0.001935] WARNING: CPU: 0 PID: 0 at __clk_put+0xe8/0x128 [ 0.002650] Modules linked in: [ 0.003058] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.67+ #1 [ 0.003852] Hardware name: MediaTek MT8183 (DT) [ 0.004446] pstate: 20400085 (nzCv daIf +PAN -UAO) [ 0.005073] pc : __clk_put+0xe8/0x128 [ 0.005555] lr : clk_put+0xc/0x14 [ 0.005988] sp : ffffff80090b3ea0 [ 0.006422] x29: ffffff80090b3ea0 x28: 0000000040e20018 [ 0.007121] x27: ffffffc07bfff780 x26: 0000000000000001 [ 0.007819] x25: ffffff80090bda80 x24: ffffff8008ec5828 [ 0.008517] x23: ffffff80090bd000 x22: ffffff8008d8b2e8 [ 0.009216] x21: 0000000000000001 x20: fffffffffffffdfb [ 0.009914] x19: ffffff8009166180 x18: 00000000002bffa8 [ 0.010612] x17: ffffffc012996980 x16: 0000000000000000 [ 0.011311] x15: ffffffbf004a6800 x14: 3536343038393334 [ 0.012009] x13: 2079726576652073 x12: 7eb9c62c5c38f100 [ 0.012707] x11: ffffff80090b3ba0 x10: ffffff80090b3ba0 [ 0.013405] x9 : 0000000000000004 x8 : 0000000000000040 [ 0.014103] x7 : ffffffc079400270 x6 : 0000000000000000 [ 0.014801] x5 : ffffffc079400248 x4 : 0000000000000000 [ 0.015499] x3 : 0000000000000000 x2 : 0000000000000000 [ 0.016197] x1 : ffffff80091661c0 x0 : fffffffffffffdfb [ 0.016896] Call trace: [ 0.017218] __clk_put+0xe8/0x128 [ 0.017654] clk_put+0xc/0x14 [ 0.018048] timer_of_cleanup+0x60/0x7c [ 0.018551] mtk_syst_init+0x8c/0x9c [ 0.019020] timer_probe+0x6c/0xe0 [ 0.019469] time_init+0x14/0x44 [ 0.019893] start_kernel+0x2d0/0x46c [ 0.020378] ---[ end trace 8c1efabea1267649 ]--- [ 0.020982] ------------[ cut here ]------------ [ 0.021586] Trying to vfree() nonexistent vm area ((____ptrval____)) [ 0.022427] WARNING: CPU: 0 PID: 0 at __vunmap+0xd0/0xd8 [ 0.023119] Modules linked in: [ 0.023524] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.19.67+ #1 [ 0.024498] Hardware name: MediaTek MT8183 (DT) [ 0.025091] pstate: 60400085 (nZCv daIf +PAN -UAO) [ 0.025718] pc : __vunmap+0xd0/0xd8 [ 0.026176] lr : __vunmap+0xd0/0xd8 [ 0.026632] sp : ffffff80090b3e90 [ 0.027066] x29: ffffff80090b3e90 x28: 0000000040e20018 [ 0.027764] x27: ffffffc07bfff780 x26: 0000000000000001 [ 0.028462] x25: ffffff80090bda80 x24: ffffff8008ec5828 [ 0.029160] x23: ffffff80090bd000 x22: ffffff8008d8b2e8 [ 0.029858] x21: 0000000000000000 x20: 0000000000000000 [ 0.030556] x19: ffffff800800d000 x18: 00000000002bffa8 [ 0.031254] x17: 0000000000000000 x16: 0000000000000000 [ 0.031952] x15: ffffffbf004a6800 x14: 3536343038393334 [ 0.032651] x13: 2079726576652073 x12: 7eb9c62c5c38f100 [ 0.033349] x11: ffffff80090b3b40 x10: ffffff80090b3b40 [ 0.034047] x9 : 0000000000000005 x8 : 5f5f6c6176727470 [ 0.034745] x7 : 5f5f5f5f28282061 x6 : ffffff80091c86ef [ 0.035443] x5 : ffffff800852b690 x4 : 0000000000000000 [ 0.036141] x3 : 0000000000000002 x2 : 0000000000000002 [ 0.036839] x1 : 7eb9c62c5c38f100 x0 : 7eb9c62c5c38f100 [ 0.037536] Call trace: [ 0.037859] __vunmap+0xd0/0xd8 [ 0.038271] vunmap+0x24/0x30 [ 0.038664] __iounmap+0x2c/0x34 [ 0.039088] timer_of_cleanup+0x70/0x7c [ 0.039591] mtk_syst_init+0x8c/0x9c [ 0.040060] timer_probe+0x6c/0xe0 [ 0.040507] time_init+0x14/0x44 [ 0.040932] start_kernel+0x2d0/0x46c This commit remove the calls to timer_of_cleanup when timer_of_init fails since it is unnecessary and actually cause warnings to be printed. Fixes: a0858f937960 ("mediatek: Convert the driver to timer-of") Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/linux-arm-kernel/20190919191315.25190-1-fparent@baylibre.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-24clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machinesSergei Shtylyov1-3/+3
[ Upstream commit 37e7742c55ba856eaec7e35673ee370f36eb17f3 ] The driver seems to abuse *unsigned long* not only for the (32-bit) register values but also for the 'sh_cmt_channel::total_cycles' which needs to always be 64-bit -- as a result, the clocksource's mask is needlessly clamped down to 32-bits on the 32-bit machines... Fixes: 19bdc9d061bc ("clocksource: sh_cmt clocksource support") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-24clocksource/drivers/sh_cmt: Fixup for 64-bit machinesSergei Shtylyov1-39/+33
[ Upstream commit 22627c6f3ed3d9d0df13eec3c831b08f8186c38e ] When trying to use CMT for clockevents on R-Car gen3 SoCs, I noticed that 'max_delta_ns' for the broadcast timer (CMT) was shown as 1000 in /proc/timer_list. It turned out that when calculating it, the driver did 1 << 32 (causing what I think was undefined behavior) resulting in a zero delta, later clamped to 1000 by cev_delta2ns(). The root cause turned out to be that the driver abused *unsigned long* for the CMT register values (which are 16/32-bit), so that the calculation of 'ch->max_match_value' in sh_cmt_setup_channel() used the wrong branch. Using more proper 'u32' instead fixed 'max_delta_ns' and even fixed the switching an active clocksource to CMT (which caused the system to turn non-interactive before). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26clocksource/drivers/exynos_mct: Increase priority over ARM arch timerMarek Szyprowski1-2/+2
[ Upstream commit 6282edb72bed5324352522d732080d4c1b9dfed6 ] Exynos SoCs based on CA7/CA15 have 2 timer interfaces: custom Exynos MCT (Multi Core Timer) and standard ARM Architected Timers. There are use cases, where both timer interfaces are used simultanously. One of such examples is using Exynos MCT for the main system timer and ARM Architected Timers for the KVM and virtualized guests (KVM requires arch timers). Exynos Multi-Core Timer driver (exynos_mct) must be however started before ARM Architected Timers (arch_timer), because they both share some common hardware blocks (global system counter) and turning on MCT is needed to get ARM Architected Timer working properly. To ensure selecting Exynos MCT as the main system timer, increase MCT timer rating. To ensure proper starting order of both timers during suspend/resume cycle, increase MCT hotplug priority over ARM Archictected Timers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16clocksource/drivers/oxnas: Fix OX820 compatibleNeil Armstrong1-1/+1
[ Upstream commit fbc87aa0f7c429999dc31f1bac3b2615008cac32 ] The OX820 compatible is wrong is the driver, fix it. Fixes: 2ea3401e2a84 ("clocksource/drivers/oxnas: Add OX820 compatible") Reported-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16clocksource/drivers/npcm: select TIMER_OFArnd Bergmann1-0/+1
[ Upstream commit 99834eead2a04e93a120abb112542b87c42ff5e1 ] When this is disabled, we get a link failure: drivers/clocksource/timer-npcm7xx.o: In function `npcm7xx_timer_init': timer-npcm7xx.c:(.init.text+0xf): undefined reference to `timer_of_init' Fixes: 1c00289ecd12 ("clocksource/drivers/npcm: Add NPCM7xx timer driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instabilitySamuel Holland2-0/+65
commit c950ca8c35eeb32224a63adc47e12f9e226da241 upstream. The Allwinner A64 SoC is known[1] to have an unstable architectural timer, which manifests itself most obviously in the time jumping forward a multiple of 95 years[2][3]. This coincides with 2^56 cycles at a timer frequency of 24 MHz, implying that the time went slightly backward (and this was interpreted by the kernel as it jumping forward and wrapping around past the epoch). Investigation revealed instability in the low bits of CNTVCT at the point a high bit rolls over. This leads to power-of-two cycle forward and backward jumps. (Testing shows that forward jumps are about twice as likely as backward jumps.) Since the counter value returns to normal after an indeterminate read, each "jump" really consists of both a forward and backward jump from the software perspective. Unless the kernel is trapping CNTVCT reads, a userspace program is able to read the register in a loop faster than it changes. A test program running on all 4 CPU cores that reported jumps larger than 100 ms was run for 13.6 hours and reported the following: Count | Event -------+--------------------------- 9940 | jumped backward 699ms 268 | jumped backward 1398ms 1 | jumped backward 2097ms 16020 | jumped forward 175ms 6443 | jumped forward 699ms 2976 | jumped forward 1398ms 9 | jumped forward 356516ms 9 | jumped forward 357215ms 4 | jumped forward 714430ms 1 | jumped forward 3578440ms This works out to a jump larger than 100 ms about every 5.5 seconds on each CPU core. The largest jump (almost an hour!) was the following sequence of reads: 0x0000007fffffffff → 0x00000093feffffff → 0x0000008000000000 Note that the middle bits don't necessarily all read as all zeroes or all ones during the anomalous behavior; however the low 10 bits checked by the function in this patch have never been observed with any other value. Also note that smaller jumps are much more common, with backward jumps of 2048 (2^11) cycles observed over 400 times per second on each core. (Of course, this is partially explained by lower bits rolling over more frequently.) Any one of these could have caused the 95 year time skip. Similar anomalies were observed while reading CNTPCT (after patching the kernel to allow reads from userspace). However, the CNTPCT jumps are much less frequent, and only small jumps were observed. The same program as before (except now reading CNTPCT) observed after 72 hours: Count | Event -------+--------------------------- 17 | jumped backward 699ms 52 | jumped forward 175ms 2831 | jumped forward 699ms 5 | jumped forward 1398ms Further investigation showed that the instability in CNTPCT/CNTVCT also affected the respective timer's TVAL register. The following values were observed immediately after writing CNVT_TVAL to 0x10000000: CNTVCT | CNTV_TVAL | CNTV_CVAL | CNTV_TVAL Error --------------------+------------+--------------------+----------------- 0x000000d4a2d8bfff | 0x10003fff | 0x000000d4b2d8bfff | +0x00004000 0x000000d4a2d94000 | 0x0fffffff | 0x000000d4b2d97fff | -0x00004000 0x000000d4a2d97fff | 0x10003fff | 0x000000d4b2d97fff | +0x00004000 0x000000d4a2d9c000 | 0x0fffffff | 0x000000d4b2d9ffff | -0x00004000 The pattern of errors in CNTV_TVAL seemed to depend on exactly which value was written to it. For example, after writing 0x10101010: CNTVCT | CNTV_TVAL | CNTV_CVAL | CNTV_TVAL Error --------------------+------------+--------------------+----------------- 0x000001ac3effffff | 0x1110100f | 0x000001ac4f10100f | +0x1000000 0x000001ac40000000 | 0x1010100f | 0x000001ac5110100f | -0x1000000 0x000001ac58ffffff | 0x1110100f | 0x000001ac6910100f | +0x1000000 0x000001ac66000000 | 0x1010100f | 0x000001ac7710100f | -0x1000000 0x000001ac6affffff | 0x1110100f | 0x000001ac7b10100f | +0x1000000 0x000001ac6e000000 | 0x1010100f | 0x000001ac7f10100f | -0x1000000 I was also twice able to reproduce the issue covered by Allwinner's workaround[4], that writing to TVAL sometimes fails, and both CVAL and TVAL are left with entirely bogus values. One was the following values: CNTVCT | CNTV_TVAL | CNTV_CVAL --------------------+------------+-------------------------------------- 0x000000d4a2d6014c | 0x8fbd5721 | 0x000000d132935fff (615s in the past) Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> ======================================================================== Because the CPU can read the CNTPCT/CNTVCT registers faster than they change, performing two reads of the register and comparing the high bits (like other workarounds) is not a workable solution. And because the timer can jump both forward and backward, no pair of reads can distinguish a good value from a bad one. The only way to guarantee a good value from consecutive reads would be to read _three_ times, and take the middle value only if the three values are 1) each unique and 2) increasing. This takes at minimum 3 counter cycles (125 ns), or more if an anomaly is detected. However, since there is a distinct pattern to the bad values, we can optimize the common case (1022/1024 of the time) to a single read by simply ignoring values that match the error pattern. This still takes no more than 3 cycles in the worst case, and requires much less code. As an additional safety check, we still limit the loop iteration to the number of max-frequency (1.2 GHz) CPU cycles in three 24 MHz counter periods. For the TVAL registers, the simple solution is to not use them. Instead, read or write the CVAL and calculate the TVAL value in software. Although the manufacturer is aware of at least part of the erratum[4], there is no official name for it. For now, use the kernel-internal name "UNKNOWN1". [1]: https://github.com/armbian/build/commit/a08cd6fe7ae9 [2]: https://forum.armbian.com/topic/3458-a64-datetime-clock-issue/ [3]: https://irclog.whitequark.org/linux-sunxi/2018-01-26 [4]: https://github.com/Allwinner-Homlet/H6-BSP4.9-linux/blob/master/drivers/clocksource/arm_arch_timer.c#L272 Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Cc: stable@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23clocksource/drivers/exynos_mct: Clear timer interrupt when shutdownStuart Menefy1-0/+1
commit d2f276c8d3c224d5b493c42b6cf006ae4e64fb1c upstream. When shutting down the timer, ensure that after we have stopped the timer any pending interrupts are cleared. This fixes a problem when suspending, as interrupts are disabled before the timer is stopped, so the timer interrupt may still be asserted, preventing the system entering a low power state when the wfi is executed. Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23clocksource/drivers/exynos_mct: Move one-shot check from tick clear to ISRStuart Menefy1-11/+11
commit a5719a40aef956ba704f2aa1c7b977224d60fa96 upstream. When a timer tick occurs and the clock is in one-shot mode, the timer needs to be stopped to prevent it triggering subsequent interrupts. Currently this code is in exynos4_mct_tick_clear(), but as it is only needed when an ISR occurs move it into exynos4_mct_tick_isr(), leaving exynos4_mct_tick_clear() just doing what its name suggests it should. Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: stable@vger.kernel.org # v4.3+ Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparentingTony Lindgren1-0/+4
[ Upstream commit 983a5a43ec254cd5ddf3254db80ca96e8f8bb2a4 ] Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") moved some omap4 timers to probe with ti-sysc interconnect target module. Turns out this broke pwm-omap-dmtimer where we now try to reparent the clock to itself with the following: omap_dm_timer_of_set_source: failed to set parent With ti-sysc, we can now configure the clock sources in the dts with assigned-clocks and assigned-clock-parents. So we should be able to remove omap_dm_timer_of_set_source with clean-up patches later on. But for now, let's just fix it first by checking if parent and fck are the same and bail out of so. Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-By: Andreas Kemnade <andreas@kemnade.info> Tested-By: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-26clocksource/drivers/integrator-ap: Add missing of_node_put()Yangtao Li1-9/+16
[ Upstream commit 5eb73c831171115d3b4347e1e7124a5a35d8086c ] The function of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. integrator_ap_timer_init_of() doesn't do that. The pri_node and the sec_node are used as an identifier to compare against the current node, so we can directly drop the refcount after getting the node from the path as it is not used as pointer. By dropping the refcount right after getting it, a single variable is needed instead of two. Fix this by use a single variable and drop the refcount right after of_find_node_by_path(). Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-09clocksource/drivers/arc_timer: Utilize generic sched_clockAlexey Brodkin2-0/+23
commit bf287607c80f24387fedb431a346dc67f25be12c upstream. It turned out we used to use default implementation of sched_clock() from kernel/sched/clock.c which was as precise as 1/HZ, i.e. by default we had 10 msec granularity of time measurement. Now given ARC built-in timers are clocked with the same frequency as CPU cores we may get much higher precision of time tracking. Thus we switch to generic sched_clock which really reads ARC hardware counters. This is especially helpful for measuring short events. That's what we used to have: ------------------------------>8------------------------ $ perf stat /bin/sh -c /root/lmbench-master/bin/arc/hello > /dev/null Performance counter stats for '/bin/sh -c /root/lmbench-master/bin/arc/hello': 10.000000 task-clock (msec) # 2.832 CPUs utilized 1 context-switches # 0.100 K/sec 1 cpu-migrations # 0.100 K/sec 63 page-faults # 0.006 M/sec 3049480 cycles # 0.305 GHz 1091259 instructions # 0.36 insn per cycle 256828 branches # 25.683 M/sec 27026 branch-misses # 10.52% of all branches 0.003530687 seconds time elapsed 0.000000000 seconds user 0.010000000 seconds sys ------------------------------>8------------------------ And now we'll see: ------------------------------>8------------------------ $ perf stat /bin/sh -c /root/lmbench-master/bin/arc/hello > /dev/null Performance counter stats for '/bin/sh -c /root/lmbench-master/bin/arc/hello': 3.004322 task-clock (msec) # 0.865 CPUs utilized 1 context-switches # 0.333 K/sec 1 cpu-migrations # 0.333 K/sec 63 page-faults # 0.021 M/sec 2986734 cycles # 0.994 GHz 1087466 instructions # 0.36 insn per cycle 255209 branches # 84.947 M/sec 26002 branch-misses # 10.19% of all branches 0.003474829 seconds time elapsed 0.003519000 seconds user 0.000000000 seconds sys ------------------------------>8------------------------ Note how much more meaningful is the second output - time spent for execution pretty much matches number of cycles spent (we're runnign @ 1GHz here). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21clockevents/drivers/i8253: Add support for PIT shutdown quirkMichael Kelley1-2/+12
commit 35b69a420bfb56b7b74cb635ea903db05e357bec upstream. Add support for platforms where pit_shutdown() doesn't work because of a quirk in the PIT emulation. On these platforms setting the counter register to zero causes the PIT to start running again, negating the shutdown. Provide a global variable that controls whether the counter register is zero'ed, which platform specific code can override. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org> Cc: "devel@linuxdriverproject.org" <devel@linuxdriverproject.org> Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org> Cc: "virtualization@lists.linux-foundation.org" <virtualization@lists.linux-foundation.org> Cc: "jgross@suse.com" <jgross@suse.com> Cc: "akataria@vmware.com" <akataria@vmware.com> Cc: "olaf@aepfle.de" <olaf@aepfle.de> Cc: "apw@canonical.com" <apw@canonical.com> Cc: vkuznets <vkuznets@redhat.com> Cc: "jasowang@redhat.com" <jasowang@redhat.com> Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com> Cc: KY Srinivasan <kys@microsoft.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1541303219-11142-2-git-send-email-mikelley@microsoft.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-27clocksource/drivers/timer-atmel-pit: Properly handle error casesAlexandre Belloni1-6/+14
The smatch utility reports a possible leak: smatch warnings: drivers/clocksource/timer-atmel-pit.c:183 at91sam926x_pit_dt_init() warn: possible memory leak of 'data' Ensure data is freed before exiting with an error. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-09-24clocksource/drivers/fttmr010: Fix set_next_event handlerTao Ren1-7/+11
Currently, the aspeed MATCH1 register is updated to <current_count - cycles> in set_next_event handler, with the assumption that COUNT register value is preserved when the timer is disabled and it continues decrementing after the timer is enabled. But the assumption is wrong: RELOAD register is loaded into COUNT register when the aspeed timer is enabled, which means the next event may be delayed because timer interrupt won't be generated until <0xFFFFFFFF - current_count + cycles>. The problem can be fixed by updating RELOAD register to <cycles>, and COUNT register will be re-loaded when the timer is enabled and interrupt is generated when COUNT register overflows. The test result on Facebook Backpack-CMM BMC hardware (AST2500) shows the issue is fixed: without the patch, usleep(100) suspends the process for several milliseconds (and sometimes even over 40 milliseconds); after applying the fix, usleep(100) takes averagely 240 microseconds to return under the same workload level. Signed-off-by: Tao Ren <taoren@fb.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Lei YU <mine260309@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-09-13clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for ↵Keerthy1-0/+3
non-am43 SoCs The 32k clocksource is NONSTOP for non-am43 SoCs. Hence add the flag for all the other SoCs. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-08-19Merge tag 'riscv-for-linus-4.19-mw0' of ↵Linus Torvalds3-0/+117
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains some major improvements to the RISC-V port, including the necessary interrupt controller and timer support to actually make it to userspace. Support for three devices has been added: - the ISA-mandated timers on RISC-V systems. - the ISA-mandated first-level interrupt controller on RISC-V systems, which is handled as part of our core arch code because it's very small and tightly tied to the ISA. - SiFive's platform-level interrupt controller, which talks to the actual devices. In addition to these new devices, there are a handful of cleanups all over the RISC-V tree: - build fixes for various configurations: * A fix to the vDSO build's makefile so it respects CFLAGS. * The addition of __lshrti3, a libgcc derived function necessary for some 32-bit configurations. * !SMP && PERF_EVENTS - Cleanups to the arch code to remove the remnants of old versions of the drivers that were just properly submitted. * Some dead code from the timer driver, most of which wasn't ever even compiled. * Cleanups of some interrupt #defines, which are now local to the interrupt handling code. - Fixes to ptrace(), which while not being sufficient to fully make GDB work are at least sufficient to get simple GDB tasks to work. - Early printk support via RISC-V's architecturally mandated SBI console device. - A fix to our early debug trap handler to ensure it's always aligned. These patches have all been through a fairly extensive review process, but as this enables a whole pile of functionality (ie, userspace) I'm confident we'll need to submit a few more patches. The only concrete issues I know about are the sys_riscv_flush_icache patches, but as I managed to screw those up on Friday I figured it'd be best to let them bake another week. This tag boots a Fedora root filesystem on QEMU's master branch for me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted on the HiFive Unleashed. Thanks to Christoph Hellwig and the other guys at WD for getting the new drivers in shape!" * tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller dt-bindings: interrupt-controller: RISC-V local interrupt controller RISC-V: Fix !CONFIG_SMP compilation error irqchip: add a SiFive PLIC driver RISC-V: Add the directive for alignment of stvec's value clocksource: new RISC-V SBI timer driver RISC-V: implement low-level interrupt handling RISC-V: add a definition for the SIE SEIE bit RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h RISC-V: simplify software interrupt / IPI code RISC-V: remove timer leftovers RISC-V: Add early printk support via the SBI console RISC-V: Don't increment sepc after breakpoint. RISC-V: implement __lshrti3. RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO
2018-08-14Merge branch 'x86-timers-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 timer updates from Thomas Gleixner: "Early TSC based time stamping to allow better boot time analysis. This comes with a general cleanup of the TSC calibration code which grew warts and duct taping over the years and removes 250 lines of code. Initiated and mostly implemented by Pavel with help from various folks" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) x86/kvmclock: Mark kvm_get_preset_lpj() as __init x86/tsc: Consolidate init code sched/clock: Disable interrupts when calling generic_sched_clock_init() timekeeping: Prevent false warning when persistent clock is not available sched/clock: Close a hole in sched_clock_init() x86/tsc: Make use of tsc_calibrate_cpu_early() x86/tsc: Split native_calibrate_cpu() into early and late parts sched/clock: Use static key for sched_clock_running sched/clock: Enable sched clock early sched/clock: Move sched clock initialization and merge with generic clock x86/tsc: Use TSC as sched clock early x86/tsc: Initialize cyc2ns when tsc frequency is determined x86/tsc: Calibrate tsc only once ARM/time: Remove read_boot_clock64() s390/time: Remove read_boot_clock64() timekeeping: Default boot time offset to local_clock() timekeeping: Replace read_boot_clock64() with read_persistent_wall_and_boot_offset() s390/time: Add read_persistent_wall_and_boot_offset() x86/xen/time: Output xen sched_clock time from 0 x86/xen/time: Initialize pv xen time in init_hypervisor_platform() ...
2018-08-13clocksource: new RISC-V SBI timer driverPalmer Dabbelt3-0/+117
The RISC-V ISA defines a per-hart real-time clock and timer, which is present on all systems. The clock is accessed via the 'rdtime' pseudo-instruction (which reads a CSR), and the timer is set via an SBI call. Contains various improvements from Atish Patra <atish.patra@wdc.com>. Signed-off-by: Dmitriy Cherkasov <dmitriy@oss-tech.org> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> [hch: remove dead code, add SPDX tags, used riscv_of_processor_hart(), minor cleanups, merged hotplug cpu support and other improvements from Atish] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-02clocksource/drivers/arm_arch_timer: Fix bogus cpu_all_mask usageThomas Gleixner1-1/+1
Using cpu_all_mask as target mask for clockevents is wrong as it never can actually target not possible CPUs. Use cpu_possible_mask instead Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-08-02clocksource: ti-32k: Remove CLOCK_SOURCE_SUSPEND_NONSTOP flagKeerthy1-2/+1
Since commit 39232ed5a179 ("time: Introduce one suspend clocksource to compensate the suspend time") suspend/resume fails on AM437x platforms as the clocksource actually stops in suspend. Hence remove the CLOCK_SOURCE_SUSPEND_NONSTOP flag. Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <daniel.lezcano@linaro.org> Cc: <linux-omap@vger.kernel.org> Cc: <baolin.wang@linaro.org> Cc: <d-gerlach@ti.com> Cc: <tony@atomide.com> Cc: <t-kristo@ti.com> Link: https://lkml.kernel.org/r/1533191716-20476-1-git-send-email-j-keerthy@ti.com
2018-07-26clocksource/drivers/sprd: Register one always-on timer to compensate suspend ↵Baolin Wang1-0/+50
time Since the clocksource framework has introduced one suspend clocksource to compensate the suspend time, this patch registers one always-on timer as the suspend clocksource. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-07-26clocksource/drivers/timer-mediatek: Add support for system timerStanley Chu1-1/+103
This patch adds a new "System Timer" on the Mediatek SoCs. The System Timer is introduced as an always-on timer being clockevent device for tick-broadcasting. For clock, it is driven by 13 MHz system clock. The implementation uses the system clock with no clock source divider. For interrupt, the clock event timer can be used by all cores. Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-07-26clocksource/drivers/timer-mediatek: Convert the driver to timer-ofStanley Chu1-125/+80
Convert the driver to use the timer_of helpers. This allows to remove custom proprietary structure, factors out and simplifies the code. Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-07-26clocksource/drivers/timer-mediatek: Use specific prefix for GPTStanley Chu1-77/+80
Use specific prefix to specify the name of supported timer hardware: "General Purpose Timer (GPT)". Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-07-26clocksource/drivers/timer-mediatek: Rename mtk_timer to timer-mediatekStanley Chu2-1/+1
Rename mtk_timer to timer-mediatek to apply new naming convention in clocksource folder. Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-07-26clocksource/drivers: Set clockevent device cpumask to cpu_possible_maskSudeep Holla4-4/+4
Currently, quite a few clockevent devices have cpumask set to cpu_all_mask which should be fine. However, cpu_possible_mask is more accurate and if there are any other clockevent devices in the system which have cpumask set to cpu_possible_mask, then having cpu_all_mask may result in issues (mostly boot hang with forever loops in clockevents_notify_released). So, lets replace all the clockevent device cpu_all_mask to cpu_possible_mask in order to prevent above mentioned possible issue. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-07-20ARM/time: Remove read_boot_clock64()Pavel Tatashin1-1/+1
read_boot_clock64() is deleted, and replaced with read_persistent_wall_and_boot_offset(). The default implementation of read_persistent_wall_and_boot_offset() provides a better fallback than the current stubs for read_boot_clock64() that arm has with no users, so remove the old code. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-19-pasha.tatashin@oracle.com
2018-07-10clocksource: arm_arch_timer: Set arch_mem_timer cpumask to cpu_possible_maskSudeep Holla1-1/+1
Currently, arch_mem_timer cpumask is set to cpu_all_mask which should be fine. However, cpu_possible_mask is more accurate and if there are other clockevent source in the system which are set to cpu_possible_mask, then having cpu_all_mask may result in issue. E.g. on a platform with arm,sp804 timer with rating 300 and cpu_possible_mask and this arch_mem_timer timer with rating 400 and cpu_all_mask, tick_check_preferred may choose both preferred as the cpumasks are not equal though they must be. This issue was root caused incorrectly initially and a fix was merged as commit 1332a9055801 ("tick: Prefer a lower rating device only if it's CPU local device"). Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Link: https://lkml.kernel.org/r/1531151136-18297-2-git-send-email-sudeep.holla@arm.com
2018-06-24Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A small set of fixes for time(r) related issues: - Fix a long standing conversion issue in jiffies_to_msecs() for odd HZ values like 1024 or 1200 which resulted in returning 0 for small jiffies values due to rounding down. - Use the proper CONFIG symbol in the new Y2038 safe compat code for posix-timers. Not yet a visible breakage, but this will immediately trigger when the architecture support for the new interfaces is merged. - Return an error code in the STM32 clocksource driver on failure instead of success. - Remove the redundant and stale irq disabled check in the posix cpu timer code. The check is at the wrong place anyway and lockdep already covers it via the sighand lock locking coverage" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Make sure jiffies_to_msecs() preserves non-zero time periods posix-timers: Fix nanosleep_copyout() for CONFIG_COMPAT_32BIT_TIME clocksource/drivers/stm32: Fix error return code posix-cpu-timers: Remove lockdep_assert_irqs_disabled()
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook3-3/+3
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13clocksource/drivers/stm32: Fix error return codeJulia Lawall1-1/+3
Return an error code on failure. Problem found using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: kernel-janitors@vger.kernel.org Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lkml.kernel.org/r1528640655-18948-3-git-send-email-Julia.Lawall@lip6.fr
2018-06-09Merge tag 'clk-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ...
2018-05-23clocksource/drivers/mxs_timer: Switch to SPDX identifierFabio Estevam1-21/+7
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-23clocksource/drivers/timer-imx-tpm: Switch to SPDX identifierFabio Estevam1-9/+4
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-23clocksource/drivers/timer-imx-gpt: Switch to SPDX identifierFabio Estevam1-20/+6
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-23clocksource/drivers/timer-imx-gpt: Remove outdated file pathFabio Estevam1-2/+0
imx gpt timer driver has been moved from arch/arm/mach-imx to drivers/clocksource/ a long time ago, so remove the reference to the old file path. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-18clocksource/drivers/arc_timer: Add comments about locking while read GFRCEugeniy Paltsev1-0/+14
This came to light in some internal discussions and it is nice to have this documented rather than digging up the PRM (Prog Ref Manual) again. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-18clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messagesMatt Redfearn1-8/+10
Several messages from the MIPS GIC driver include the text "GIC", "GIC timer", etc, but the format is not standard. Add a pr_fmt of "mips-gic-timer: " and reword the messages now that they will be prefixed with the driver name. Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-18clocksource/drivers/sprd: Fix Kconfig dependencyChunyan Zhang1-1/+3
SPRD arch doesn't select SPRD_TIMER, so this config would not appear even if ARCH_SPRD is set but COMPILE_TEST not. Fix the dependency of this config with SPRD arch, and set a default value for it, also leave other choices for EXPERT. Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-02ARM: timer-sp: Use of_clk_get_parent_count() instead of open codingGeert Uytterhoeven1-1/+2
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-19clocksource/imx-tpm: Correct -ETIME return condition checkAnson Huang1-1/+1
The additional brakects added to tpm_set_next_event's return value computation causes (int) forced type conversion NOT taking effect, and the incorrect value return will cause various system timer issue, like RCU stall etc.. Remove the additional brackets to make sure tpm_set_next_event always returns correct value. Fixes: 059ab7b82eec ("clocksource/drivers/imx-tpm: Add imx tpm timer support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Dong Aisheng <Aisheng.dong@nxp.com> Cc: stable@vger.kernel.org Cc: daniel.lezcano@linaro.org Cc: Linux-imx@nxp.com Link: https://lkml.kernel.org/r/1524117883-2484-1-git-send-email-Anson.Huang@nxp.com
2018-04-16Merge branch 'timers-core-for-linus' of ↵Linus Torvalds4-10/+257
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull missed timer updates from Thomas Gleixner: "This is a branch which got forgotten during the merge window, but it contains only fixes and hardware enablement. No fundamental changes. - Various fixes for the imx-tpm clocksource driver - A new timer driver for the NCPM7xx SoC family" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/imx-tpm: Add different counter width support clocksource/drivers/imx-tpm: Correct some registers operation flow clocksource/drivers/imx-tpm: Fix typo of clock name dt-bindings: timer: tpm: fix typo of clock name clocksource/drivers/npcm: Add NPCM7xx timer driver dt-binding: timer: document NPCM7xx timer DT bindings
2018-04-06Merge tag 'armsoc-soc' of ↵Linus Torvalds3-0/+1004
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-21 17:20:20 +0300