summaryrefslogtreecommitdiff
path: root/drivers/clocksource
AgeCommit message (Collapse)AuthorFilesLines
2014-04-03Merge branch 'x86-nuke-platforms-for-linus' of ↵Linus Torvalds2-114/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 old platform removal from Peter Anvin: "This patchset removes support for several completely obsolete platforms, where the maintainers either have completely vanished or acked the removal. For some of them it is questionable if there even exists functional specimens of the hardware" Geert Uytterhoeven apparently thought this was a April Fool's pull request ;) * 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, platforms: Remove NUMAQ x86, platforms: Remove SGI Visual Workstation x86, apic: Remove support for IBM Summit/EXA chipset x86, apic: Remove support for ia32-based Unisys ES7000
2014-04-01Merge branch 'timers-core-for-linus' of ↵Linus Torvalds10-63/+841
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes from Thomas Gleixner: "This assorted collection provides: - A new timer based timer broadcast feature for systems which do not provide a global accessible timer device. That allows those systems to put CPUs into deep idle states where the per cpu timer device stops. - A few NOHZ_FULL related improvements to the timer wheel - The usual updates to timer devices found in ARM SoCs - Small improvements and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) tick: Remove code duplication in tick_handle_periodic() tick: Fix spelling mistake in tick_handle_periodic() x86: hpet: Use proper destructor for delayed work workqueue: Provide destroy_delayed_work_on_stack() clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTS timer: Remove code redundancy while calling get_nohz_timer_target() hrtimer: Rearrange comments in the order struct members are declared timer: Use variable head instead of &work_list in __run_timers() clocksource: exynos_mct: silence a static checker warning arm: zynq: Add support for cpufreq arm: zynq: Don't use arm_global_timer with cpufreq clocksource/cadence_ttc: Overhaul clocksource frequency adjustment clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI sh: Remove Kconfig entries for TMU, CMT and MTU2 ARM: shmobile: Remove CMT, TMU and STI Kconfig entries clocksource: armada-370-xp: Use atomic access for shared registers clocksource: orion: Use atomic access for shared registers clocksource: timer-keystone: Delete unnecessary variable clocksource: timer-keystone: introduce clocksource driver for Keystone ...
2014-03-22clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTSGeert Uytterhoeven1-0/+4
If GENERIC_CLOCKEVENTS=n: drivers/clocksource/sh_cmt.c:54:28: error: field 'ced' has incomplete type drivers/clocksource/sh_cmt.c: In function 'sh_cmt_interrupt': drivers/clocksource/sh_cmt.c:407:23: error: 'CLOCK_EVT_MODE_ONESHOT' undeclared (first use in this function) drivers/clocksource/sh_mtu2.c:44:28: error: field 'ced' has incomplete type drivers/clocksource/sh_mtu2.c: In function 'ced_to_sh_mtu2': drivers/clocksource/sh_mtu2.c:184:70: warning: initialization from incompatible pointer type [enabled by default] drivers/clocksource/sh_mtu2.c: At top level: drivers/clocksource/sh_mtu2.c:188:16: warning: 'enum clock_event_mode' declared inside parameter list [enabled by default] drivers/clocksource/sh_tmu.c:45:28: error: field 'ced' has incomplete type drivers/clocksource/sh_tmu.c: In function 'sh_tmu_interrupt': drivers/clocksource/sh_tmu.c:207:21: error: 'CLOCK_EVT_MODE_ONESHOT' undeclared (first use in this function) drivers/clocksource/em_sti.c:44:28: error: field 'ced' has incomplete type drivers/clocksource/em_sti.c: In function 'ced_to_em_sti': drivers/clocksource/em_sti.c:251:69: warning: initialization from incompatible pointer type [enabled by default] drivers/clocksource/em_sti.c: At top level: drivers/clocksource/em_sti.c:255:16: warning: 'enum clock_event_mode' declared inside parameter list [enabled by default] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Magnus Damm <damm@opensource.se> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1395324352-9146-1-git-send-email-geert@linux-m68k.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-12clocksource: exynos_mct: silence a static checker warningDan Carpenter1-1/+1
My guess is we aren't going to have a 2 digit cpuid here any time soon but the static checkers don't know that and complain that the snprintf() could overflow. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-03-12clocksource/cadence_ttc: Overhaul clocksource frequency adjustmentSoren Brinkmann1-20/+84
The currently used method adjusting the clocksource to a changing input frequency does not work on kernels from 3.11 on. The new approach is to keep the timer frequency as constant as possible. I.e. - due to the TTC's prescaler limitations, allow frequency changes only if the frequency scales by a power of 2 - adjust the counter's divider on the fly when a frequency change occurs This limits cpufreq to scale by certain factors only. But we may keep the time base somewhat constant, so that sleep() & co keep working as expected, while supporting cpufreq. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Michal Simek <michal.simek@xilinx.com>
2014-03-12clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabledSoren Brinkmann1-15/+2
The timer core takes care of serialization and IRQs. Hence the driver is no longer required to disable interrupts when calling clockevents_update_freq(). Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Michal Simek <michal.simek@xilinx.com>
2014-03-12clocksource: Add Kconfig entries for CMT, MTU2, TMU and STIMagnus Damm1-0/+44
Add Kconfig entries for CMT, MTU2, TMU and STI to drivers/clocksource/Kconfig. This will allow us to get rid of duplicated entires in architecture code such as arch/sh and arch/arm/mach-shmobile. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-03-12clocksource: armada-370-xp: Use atomic access for shared registersEzequiel Garcia1-8/+4
Replace the driver-specific thread-safe shared register API by the recently introduced atomic_io_clear_set(). Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-03-12clocksource: orion: Use atomic access for shared registersEzequiel Garcia1-18/+10
Replace the driver-specific thread-safe shared register API by the recently introduced atomic_io_clear_set(). Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Willy Tarreau <w@1wt.eu> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-03-12clocksource: timer-keystone: Delete unnecessary variableMatthias Brugger1-4/+1
Commit 438e0bff5257 added the timer-keystone device driver but make use of an unnecessary variable in the init function. This patch deletes this variable. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-03-12clocksource: timer-keystone: introduce clocksource driver for KeystoneIvan Khoronzhuk2-0/+245
Add broadcast clock-event device for the Keystone arch. The timer can be configured as a general-purpose 64-bit timer, dual general-purpose 32-bit timers. When configured as dual 32-bit timers, each half can operate in conjunction (chain mode) or independently (unchained mode) of each other. Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Santosh shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-03-12clocksource: sunxi: Add new compatiblesMaxime Ripard1-1/+1
The Allwinner A10 compatibles were following a slightly different compatible patterns than the rest of the SoCs for historical reasons. Add compatibles matching the other pattern to the timer driver for consistency, and keep the older one for backward compatibility. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-03-12ARM: u300: move timer driver to clocksourceLinus Walleij2-0/+448
Move the U300 timer driver down to the clocksource driver subsystem and keep arch/arm clean. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-03-12clocksource: arch_timer: Set dynamic irq affinity on mmio clockeventStephen Boyd1-0/+1
Set the CLOCK_EVT_FEAT_DYNIRQ flag on the memory mapped clockevent so that we save power by waking up the CPU with the next event when this timer is used in broadcast mode. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-03-06clocksource: vf_pit_timer: use complement for sched_clock readingStefan Agner1-1/+1
Vybrids PIT register is monitonic decreasing. However, sched_clock reading needs to be monitonic increasing. Use bitwise not to get the complement of the clock register. This fixes the clock going backward. Also, the clock now starts at 0 since we load the register with the maximum value at start. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: daniel.lezcano@linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Link: http://lkml.kernel.org/r/d25af915993aec1b486be653eb86f748ddef54fe.1394057313.git.stefan@agner.ch Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-12x86, apic: Remove support for IBM Summit/EXA chipsetDavid Rientjes2-114/+0
There should no longer be any IBM x440 systems or those using the Summit/EXA chipset out in the wild, so remove support for it. We've done our due diligence in reaching out to any contact information listed for this chipset and no indication was given that it should be kept around. Signed-off-by: David Rientjes <rientjes@google.com>
2014-02-06clocksource: Kona: Print warning rather than panicTim Kryger1-26/+28
Since there may be other clocksources available, this driver should not trigger a panic simply because it can not determine the frequency of an external clock. This change refactors the driver to allow a warning to be printed in this case instead. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Cc: Christian Daudt <bcm@fixthebug.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1391559304-26558-1-git-send-email-tim.kryger@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-01clocksource: kona: Add basic use of external clockTim Kryger1-3/+11
When an clock is specified in the device tree, enable it and use it to determine the external clock frequency. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-24Merge tag 'dt-for-linus' of ↵Linus Torvalds2-18/+9
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT and DT-conversion-related changes for various ARM platforms. Most of these are to enable various devices on various boards, etc, and not necessarily worth enumerating. New boards and systems continue to come in as new devicetree files that don't require corresponding C changes any more, which is indicating that the system is starting to work fairly well. A few things worth pointing out: * ST Ericsson ux500 platforms have made the major push to move over to fully support the platform with DT * Renesas platforms continue their conversion over from legacy platform devices to DT-based for hardware description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits) ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6 ARM: dts: sirf: add lost minigpsrtc device node ARM: dts: sirf: add clock, frequence-voltage table for CPU0 ARM: dts: sirf: add lost bus_width, clock and status for sdhci ARM: dts: sirf: add lost clocks for cphifbg ARM: dts: socfpga: add pl330 clock ARM: dts: socfpga: update L2 tag and data latency arm: sun7i: cubietruck: Enable the i2c controllers ARM: dts: add support for EXYNOS4412 based TINY4412 board ARM: dts: Add initial support for Arndale Octa board ARM: bcm2835: add USB controller to device tree ARM: dts: MSM8974: Add MMIO architected timer node ARM: dts: MSM8974: Add restart node ARM: dts: sun7i: external clock outputs ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style ARM: dts: sun7i: Add pin muxing options for clock outputs ARM: dts: sun7i: Add rtp controller node ARM: dts: sun5i: Add rtp controller node ARM: dts: sun4i: Add rtp controller node ...
2014-01-24Merge tag 'soc-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New core SoC-specific changes. New platforms: * Introduction of a vendor, Hisilicon, and one of their SoCs with some random numerical product name. * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU). * Marvell Berlin series of SoCs, which include the one in Chromecast. * MOXA platform support, ARM9-based platform used mostly in industrial products * Support for Freescale's i.MX50 SoC. Other work: * Renesas work for new platforms and drivers, and conversion over to more multiplatform-friendly device registration schemes. * SMP support for Allwinner sunxi platforms. * ... plus a bunch of other stuff across various platforms" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits) ARM: tegra: fix tegra_powergate_sequence_power_up() inline ARM: msm_defconfig: Update for multi-platform ARM: msm: Move MSM's DT based hardware to multi-platform support ARM: msm: Only build timer.c if required ARM: msm: Only build clock.c on proc_comm based platforms ARM: ux500: Enable system suspend with WFI support ARM: ux500: turn on PRINTK_TIME in u8500_defconfig ARM: shmobile: r8a7790: Fix I2C controller names ARM: msm: Simplify ARCH_MSM_DT config ARM: msm: Add support for MSM8974 SoC ARM: sunxi: select ARM_PSCI MAINTAINERS: Update Allwinner sunXi maintainer files ARM: sunxi: Select RESET_CONTROLLER ARM: imx: improve the comment of CCM lpm SW workaround ARM: imx: improve status check of clock gate ARM: imx: add necessary interface for pfd ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support ARM: imx: Add cpu frequency scaling support ARM i.MX35: Add devicetree support. ...
2014-01-20Merge branch 'timers-core-for-linus' of ↵Linus Torvalds19-47/+248
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes from Ingo Molnar: - ARM clocksource/clockevent improvements and fixes - generic timekeeping updates: TAI fixes/improvements, cleanups - Posix cpu timer cleanups and improvements - dynticks updates: full dynticks bugfixes, optimizations and cleanups * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) clocksource: Timer-sun5i: Switch to sched_clock_register() timekeeping: Remove comment that's mostly out of date rtc-cmos: Add an alarm disable quirk timekeeper: fix comment typo for tk_setup_internals() timekeeping: Fix missing timekeeping_update in suspend path timekeeping: Fix CLOCK_TAI timer/nanosleep delays tick/timekeeping: Call update_wall_time outside the jiffies lock timekeeping: Avoid possible deadlock from clock_was_set_delayed timekeeping: Fix potential lost pv notification of time change timekeeping: Fix lost updates to tai adjustment clocksource: sh_cmt: Add clk_prepare/unprepare support clocksource: bcm_kona_timer: Remove unused bcm_timer_ids clocksource: vt8500: Remove deprecated IRQF_DISABLED clocksource: tegra: Remove deprecated IRQF_DISABLED clocksource: misc drivers: Remove deprecated IRQF_DISABLED clocksource: sh_mtu2: Remove unnecessary platform_set_drvdata() clocksource: sh_tmu: Remove unnecessary platform_set_drvdata() clocksource: armada-370-xp: Enable timer divider only when needed clocksource: clksrc-of: Warn if no clock sources are found clocksource: orion: Switch to sched_clock_register() ...
2014-01-19clocksource: Timer-sun5i: Switch to sched_clock_register()Stephen Boyd1-2/+2
The 32-bit sched_clock() interface supports 64 bits since 3.13-rc1. Upgrade to the 64-bit function to allow us to remove the 32-bit registration interface. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1389922686-6249-1-git-send-email-sboyd@codeaurora.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-14Merge branch 'clockevents/3.14' of ↵Ingo Molnar19-47/+248
git://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clocksource/clockevent updates from Daniel Lezcano: * Axel Lin removed an unused structure defining the ids for the bcm kona driver. * Ezequiel Garcia enabled the timer divider only when the 25MHz timer is not used for the armada 370 XP. * Jingoo Han removed a pointless platform data initialization for the sh_mtu and sh_mtu2. * Laurent Pinchart added the clk_prepare/clk_unprepare for sh_cmt. * Linus Walleij added a useful warning in clk_of when no clocks are found while the old behavior was to silently hang at boot time. * Maxime Ripard added the high speed timer drivers for the Allwinner SoCs (A10, A13, A20). He increased the rating, shared the irq across all available cpus and fixed the clockevent's irq initialization for the sun4i. * Michael Opdenacker removed the usage of the IRQF_DISABLED for the all the timers driver located in drivers/clocksource. * Stephen Boyd switched to sched_clock_register for the arm_global_timer, cadence_ttc, sun4i and orion timers. Conflicts: drivers/clocksource/clksrc-of.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-04Merge tag 'renesas-dt3-for-v3.14' of ↵Olof Johansson1-4/+16
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Third Round of Renesas ARM Based SoC DT Updates for v3.14 * r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCSs - Add SSI, QSPI and MSIOF clocks in device tree r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards - Remove reference DTS - Specify external clock frequency in DT - Sync non-reference DTS with referene DTS - Add clocks to DTS * r8a7740 (R-Mobile A1) based Armadillo board - Add gpio-keys device - Add PWM backlight enable GPIO - Add PWM backlight power supply * r8a73a0 (SH-Mobile AG5), r8a7740 (R-Mobile A1) and r8a73a4 (SH-Mobile APE6) SoCs - Specify PFC interrupts in DT * tag 'renesas-dt3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (72 commits) ARM: shmobile: r8a7791: Add SSI clocks in device tree ARM: shmobile: r8a7790: Add SSI clocks in device tree ARM: shmobile: r8a7791: Add QSPI module clock in device tree ARM: shmobile: r8a7790: Add QSPI module clock in device tree ARM: shmobile: r8a7791: Add MSIOF clocks in device tree ARM: shmobile: r8a7790: Add MSIOF clocks in device tree ARM: shmobile: Remove Koelsch reference DTS ARM: shmobile: Remove Lager reference DTS ARM: shmobile: koelsch: Specify external clock frequency in DT ARM: shmobile: lager: Specify external clock frequency in DT ARM: shmobile: Sync Koelsch DTS with Koelsch reference DTS ARM: shmobile: Sync Lager DTS with Lager reference DTS ARM: shmobile: r8a7791: Add clocks ARM: shmobile: r8a7790: Reference clocks ARM: shmobile: r8a7790: Add clocks ARM: shmobile: armadillo: dts: Add gpio-keys device ARM: shmobile: sh73a0: Specify PFC interrupts in DT ARM: shmobile: r8a7740: Specify PFC interrupts in DT ARM: shmobile: r8a73a4: Specify PFC interrupts in DT ARM: shmobile: armadillo: dts: Add PWM backlight enable GPIO ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-30clocksource: cadence_ttc: Fix mutex taken inside interrupt contextSoren Brinkmann1-8/+13
When the kernel is compiled with: CONFIG_HIGH_RES_TIMERS=no CONFIG_HZ_PERIODIC=yes CONFIG_DEBUG_ATOMIC_SLEEP=yes The following WARN appears: WARNING: CPU: 1 PID: 0 at linux/kernel/mutex.c:856 mutex_trylock+0x70/0x1fc() DEBUG_LOCKS_WARN_ON(in_interrupt()) Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.12.0-xilinx-dirty #93 [<c0014a78>] (unwind_backtrace+0x0/0x11c) from [<c0011b6c>] (show_stack+0x10/0x14) [<c0011b6c>] (show_stack+0x10/0x14) from [<c039120c>] (dump_stack+0x7c/0xc0) [<c039120c>] (dump_stack+0x7c/0xc0) from [<c001fda4>] (warn_slowpath_common+0x60/0x84) [<c001fda4>] (warn_slowpath_common+0x60/0x84) from [<c001fe48>] (warn_slowpath_fmt+0x2c/0x3c) [<c001fe48>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0392658>] (mutex_trylock+0x70/0x1fc) [<c0392658>] (mutex_trylock+0x70/0x1fc) from [<c02dfc08>] (clk_prepare_lock+0xc/0xe4) [<c02dfc08>] (clk_prepare_lock+0xc/0xe4) from [<c02e099c>] (clk_get_rate+0xc/0x44) [<c02e099c>] (clk_get_rate+0xc/0x44) from [<c02d0394>] (ttc_set_mode+0x34/0x78) [<c02d0394>] (ttc_set_mode+0x34/0x78) from [<c005f794>] (clockevents_set_mode+0x28/0x5c) [<c005f794>] (clockevents_set_mode+0x28/0x5c) from [<c00607fc>] (tick_broadcast_on_off+0x190/0x1c0) [<c00607fc>] (tick_broadcast_on_off+0x190/0x1c0) from [<c005f168>] (clockevents_notify+0x58/0x1ac) [<c005f168>] (clockevents_notify+0x58/0x1ac) from [<c02b99dc>] (cpuidle_setup_broadcast_timer+0x20/0x24) [<c02b99dc>] (cpuidle_setup_broadcast_timer+0x20/0x24) from [<c006cd04>] (generic_smp_call_function_single_interrupt+0) [<c006cd04>] (generic_smp_call_function_single_interrupt+0xe0/0x130) from [<c00138c8>] (handle_IPI+0x88/0x118) [<c00138c8>] (handle_IPI+0x88/0x118) from [<c0008504>] (gic_handle_irq+0x58/0x60) [<c0008504>] (gic_handle_irq+0x58/0x60) from [<c0012644>] (__irq_svc+0x44/0x78) Exception stack(0xef099fa0 to 0xef099fe8) 9fa0: 00000001 ef092100 00000000 ef092100 ef098000 00000015 c0399f2c c0579d74 9fc0: 0000406a 413fc090 00000000 00000000 00000000 ef099fe8 c00666ec c000f46c 9fe0: 20000113 ffffffff [<c0012644>] (__irq_svc+0x44/0x78) from [<c000f46c>] (arch_cpu_idle+0x34/0x3c) [<c000f46c>] (arch_cpu_idle+0x34/0x3c) from [<c0053980>] (cpu_startup_entry+0xa8/0x10c) [<c0053980>] (cpu_startup_entry+0xa8/0x10c) from [<000085a4>] (0x85a4) We are in an interrupt context (IPI) and we are calling clk_get_rate in the set_mode function which in turn ends up by getting a mutex... Even if that does not hang, it is a potential kernel deadlock. It is not allowed to call clk_get_rate() from interrupt context. To avoid such calls the timer input frequency is stored in the driver's data struct which makes it accessible to the driver in any context. [dlezcano] completed the changelog with the WARN trace and added a more detailed description. Tested on zync zc702. Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-26Merge branch 'tegra/dma-reset-rework' into next/dtOlof Johansson3-5/+32
Bringing in the tegra dma/reset framework cleanup as a base for the DT changes. * tegra/dma-reset-rework: (320 commits) spi: tegra: checking for ERR_PTR instead of NULL ASoC: tegra: update module reset list for Tegra124 clk: tegra: remove bogus PCIE_XCLK clk: tegra: remove legacy reset APIs ARM: tegra: remove legacy DMA entries from DT ARM: tegra: remove legacy clock entries from DT USB: EHCI: tegra: use reset framework Input: tegra-kbc - use reset framework serial: tegra: convert to standard DMA DT bindings serial: tegra: use reset framework spi: tegra: convert to standard DMA DT bindings spi: tegra: use reset framework staging: nvec: use reset framework i2c: tegra: use reset framework ASoC: tegra: convert to standard DMA DT bindings ASoC: tegra: allocate AHUB FIFO during probe() not startup() ASoC: tegra: call pm_runtime APIs around register accesses ASoC: tegra: use reset framework dma: tegra: register as an OF DMA controller dma: tegra: use reset framework ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-23Merge tag 'samsung-dt' of ↵Olof Johansson1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim: Samsung DT updates for v3.14 - Add support Octa Cores for exynos5420 : populate CPU node entries to 8 Cores : extend mct to support 8 local interrupts - Update dwmmc nodes for exynos5250 and exynos5420 : change status property of dwmmc nodes for exynos5250 : move dwmmc nodes from exynos5 to exynos5250 because it's different between exynos5250 and exynos5420 : rename mmc nodes from dwmmc for exynos5 SoCs : add dwmmc nodes for exynos5420 - Add G-Scaler nodes for exynos5420 - Add HS-i2c nodes in exynos5420 : High Speed I2C 7 channels (4 to 10) - Update sysreg binding and node name in exynos4 - Update min voltage on exynos5250-arndale - Move fifo-depth property from boards to exynos5250 SoC : because the fifo-depth property is SoC specific * tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Update Samsung sysreg binding document ARM: dts: Fix sysreg node name in exynos4.dtsi ARM: dts: Add hs-i2c nodes to exynos5420 ARM: dts: Update min voltage for vdd_arm on Arndale ARM: dts: populate cpu node entries to 8 cpus for exynos5420 clocksource: mct: extend mct to support 8 local interrupts for Exynos5420 ARM: dts: Add device nodes for GScaler blocks for exynos5420 ARM: dts: Add dwmmc DT nodes for exynos5420 SOC ARM: dts: rename mmc dts node for exynos5 series ARM: dts: Move fifo-depth property from exynos5250 board dts ARM: dts: change status property of dwmmc nodes for exynos5250 ARM: dts: Move dwmmc nodes from exynos5.dtsi to exynos5250.dtsi Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-19Merge tag 'v3.13-rc3' into dt3-baseSimon Horman3-5/+32
Linux 3.13-rc3 Conflicts: drivers/pinctrl/sh-pfc/pfc-r8a7740.c drivers/pinctrl/sh-pfc/pfc-sh7372.c
2013-12-18Merge branch 'clockevents/for-Simon-3.13-rc2' into clockevents/3.14Daniel Lezcano1-4/+16
* clocksource: sh_cmt: Add clk_prepare/unprepare support Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-18clocksource: sh_cmt: Add clk_prepare/unprepare supportLaurent Pinchart1-4/+16
Prepare the clock at probe time, as there is no other appropriate place in the driver where we're allowed to sleep. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-15clocksource: mct: extend mct to support 8 local interrupts for Exynos5420Chander Kashyap1-0/+4
Exynos5420 is octa-core SoC from Samsung. Hence extend exynos-mct clocksource driver to support 8 local interrupts. Also extend dts entries for 8 interrupts. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-13rename ARCH_BCM to ARCH_BCM_MOBILE (clocksource)Christian Daudt1-1/+1
Currently ARCH_BCM has been used for Broadcom Mobile V7 based SoCs. In order to allow other Broadcom SoCs to also use mach-bcm directory and files, this patch renames the original ARCH_BCM to ARCH_BCM_MOBILE, and uses ARCH_BCM to define any Broadcom chip residing in mach-bcm directory. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: bcm_kona_timer: Remove unused bcm_timer_idsAxel Lin1-6/+0
bcm_timer_ids is no longer used after converting to CLOCKSOURCE_OF_DECLARE. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: vt8500: Remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch removes the use of the IRQF_DISABLED flag. It's a NOOP since 2.6.35 and it will be removed one day. [dlezcano] : slightly changed the changelog Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: tegra: Remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch removes the use of the IRQF_DISABLED flag. It's a NOOP since 2.6.35 and it will be removed one day. [dlezcano] : slightly changed the changelog Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: misc drivers: Remove deprecated IRQF_DISABLEDMichael Opdenacker8-13/+8
This patch removes the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. [dlezcano] : slightly changed the changelog Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: sh_mtu2: Remove unnecessary platform_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: sh_tmu: Remove unnecessary platform_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: armada-370-xp: Enable timer divider only when neededEzequiel Garcia1-9/+9
The current code sets the timer divider bits always. However, when the 25 MHz timer is enabled, this is not needed and has no effect. As this causes some confusion, rework the code so the divider is set only when needed, i.e. when the 25 MHz timer is not in use. Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: clksrc-of: Warn if no clock sources are foundLinus Walleij1-0/+4
Many platforms rely on clocksource_of_init() being implicitly called for registering clock sources and will get zero warnings if no working clock source is available. Let's print a critical error message if no clock source is found. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: orion: Switch to sched_clock_register()Stephen Boyd1-2/+2
The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: sun4i: Switch to sched_clock_register()Stephen Boyd1-2/+2
The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. While we're here, mark the sched_clock function as notrace to prevent ftrace recursion crashes. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: cadence_ttc_timer: Switch to sched_clock_register()Stephen Boyd1-2/+2
The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Cc: Soren Brinkmann <soren.brinkmann@xilinx.com> Cc: Michal Simek <monstr@monstr.eu> Tested-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: arm_global_timer: Switch to sched_clock_register()Stephen Boyd1-2/+2
The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. While we're here increase the number of bits that sched_clock can handle to 64 to make full use of the counter. Cc: Stuart Menefy <stuart.menefy@st.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: Add Allwinner SoCs HS timers driverMaxime Ripard3-0/+197
Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: sun4i: Increase a bit the clock event and sources ratingMaxime Ripard1-2/+2
We want to keep this driver as the default provider of the clock events and source, yet some other driver might fit in the "desired" category of ratings. Hence, we need to increase a bit the rating so that we can have more flexibility in the ratings we choose. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: sun4i: Change CPU mask to cpu_possible_maskMaxime Ripard1-1/+1
The interrupt for the timer is a shared processor interrupt, so any CPU found in the system can handle it. Switch to our cpumask to cpu_possible_mask instead of cpumask_of(0). Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2013-12-11clockevent: sun4i: Fill the irq field in the clockevent structureMaxime Ripard1-0/+1
The clock event structure irq field was not filled previously to the interrupt we're using. This was resulting in the timer not being used at all when using a configuration with SMP enabled on a system with several CPUs, and with the cpumask set to the cpu_possible_mask. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2013-12-10clocksource: dw_apb_timer_of: Fix support for dts binding "snps,dw-apb-timer"Dinh Nguyen1-2/+3
In commit 620f5e1cbf (dts: Rename DW APB timer compatible strings), both "snps,dw-apb-timer-sp" and "snps,dw-apb-timer-osc" were deprecated in place of "snps,dw-apb-timer". But the driver also needs to be udpated in order to support this new binding "snps,dw-apb-timer". Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-10clocksource: dw_apb_timer_of: Fix read_sched_clockDinh Nguyen1-1/+1
The read_sched_clock should return the ~value because the clock is a countdown implementation. read_sched_clock() should be the same as __apbt_read_clocksource(). Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 22:36:28 +0300