| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Update PLL offsets to DEFAULT_EVO to configure MDIO to 800MHz.
The incorrect clock frequency leads to an incorrect MDIO clock. This,
in turn, affects the MDIO hardware configurations as the divider is
calculated from the MDIO clock frequency. If the clock frequency is
not as expected, the MDIO register fails due to the generation of an
incorrect MDIO frequency.
This issue is critical as it results in incorrect MDIO configurations
and ultimately leads to the MDIO function not working. This results in
a complete feature failure affecting all Ethernet PHYs. Specifically,
Ethernet will not work on IPQ9574 due to this issue.
Currently, the clock frequency is set to CLK_ALPHA_PLL_TYPE_DEFAULT.
However, this setting does not yield the expected clock frequency.
To rectify this, we need to change this to CLK_ALPHA_PLL_TYPE_DEFAULT_EVO.
This modification ensures that the clock frequency aligns with our
expectations, thereby resolving the MDIO register failure and ensuring
the proper functioning of the Ethernet on IPQ9574.
Fixes: d75b82cff488 ("clk: qcom: Add Global Clock Controller driver for IPQ9574")
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
Signed-off-by: Amandeep Singh <quic_amansing@quicinc.com>
Link: https://lore.kernel.org/r/20240806061105.2849944-1-quic_amansing@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In LUCID EVO PLL CAL_L_VAL and L_VAL bitfields are part of single
PLL_L_VAL register. Update for L_VAL bitfield values in PLL_L_VAL
register using regmap_write() API in __alpha_pll_trion_set_rate
callback will override LUCID EVO PLL initial configuration related
to PLL_CAL_L_VAL bit fields in PLL_L_VAL register.
Observed random PLL lock failures during PLL enable due to such
override in PLL calibration value. Use regmap_update_bits() with
L_VAL bitfield mask instead of regmap_write() API to update only
PLL_L_VAL bitfields in __alpha_pll_trion_set_rate callback.
Fixes: 260e36606a03 ("clk: qcom: clk-alpha-pll: add Lucid EVO PLL configuration interfaces")
Cc: stable@vger.kernel.org
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240611133752.2192401-2-quic_ajipan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Let the kmemdup_array() take care about multiplication and possible
overflows.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240814125513.2637955-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Let the kmemdup_array() take care about multiplication and possible
overflows.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240814125513.2637955-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Allowing these GDSCs to collapse makes the QMP combo PHYs lose their
configuration on machine suspend. Currently, the QMP combo PHY driver
doesn't reinitialise the HW on resume. Under such conditions, the USB
SuperSpeed support is broken. To avoid this, mark the pwrsts flags with
RET_ON. This is in line with USB 2 PHY GDSC config.
Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240801-x1e80100-clk-gcc-fix-usb-phy-gdscs-pwrsts-v1-1-8df016768a0f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add dpum clock for exynosautov9.
Signed-off-by: Kwanghoon Son <k.son@samsung.com>
Link: https://lore.kernel.org/r/20240809-clk_dpum-v3-3-359decc30fe2@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The local u64 variable refdiv_val has the same value as the local u32
variable val and can be removed. Remove it and use val directly as the
divisor to also remove the following Coccinelle/coccicheck warning
reported by do_div.cocci:
WARNING: do_div() does a 64-by-32 division, please consider using div64_u64 instead
Use the preferred div_u64() function instead of the do_div() macro.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Link: https://lore.kernel.org/r/20240801103616.20430-1-thorsten.blum@toblux.com
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
In Exynos7885 (and seemingly all modern Exynos SoCs) all PLLs have a MUX
attached to them controlled by bit 4 in the PLL's CON0 register.
These MUXes can select between OSCCLK or the PLL's output, essentially
making the PLL bypassable.
These weren't modeled in the driver because the vendor provided drivers
didn't model it properly, instead setting them when updating the PMS
values.
Not having them modeled didn't cause any problems in this case, since
these MUXes were set to the PLL's output by default, but this is not the
case everywhere in this SoC.
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240806121157.479212-6-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Update CLKS_NR_FSYS to the proper value after a fix in DT bindings.
This should always be the last clock in a CMU + 1.
Fixes: cd268e309c29 ("dt-bindings: clock: Add bindings for Exynos7885 CMU_FSYS")
Cc: stable@vger.kernel.org
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240806121157.479212-5-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add a driver for the PMC clocks of sam9x7 Soc family.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Link: https://lore.kernel.org/r/20240729070811.1990964-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Move the mux table init and fill macro function definitions from the
sama7g5 pmc driver to the pmc.h header file since they will be used
by other SoC's pmc drivers as well like sam9x7.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20240729070753.1990866-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add support for hardware dividers for PLL IDs in sam9x7 SoC. The system
PLL - PLLA and the system PLL divided by 2 - PLLADIV2 with PLL ID 0 and
4 respectively, both have a hardware divider /2. This has to be taken into
account in the software to obtain the right frequencies. Support for the
same is added in the PLL driver.
fcorepllack -----> HW Div = 2 -+--> fpllack
|
+--> HW Div = 2 ---> fplladiv2ck
In this case the corepll freq is 1600 MHz. So, the plla freq is 800 MHz
after the hardware divider and the plladiv2 freq is 400 MHz after the
hardware divider (given that the DIVPMC is 0).
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20240729070746.1990805-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
SAM9X7 SoC family supports different core output frequencies for
different PLL IDs. To handle the same in the PLL driver, a separate
parameter core_output is added. The sam9x60 and sama7g5 SoC PMC drivers
are aligned to the PLL driver by adding the core output freq range in
the PLL characteristics configurations.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20240729070737.1990756-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
There is an helper to remove a consumer from the clk provider list.
Hence, let's use it when releasing a consumer.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240710-dev-clk-misc-v1-2-cd9d960099a2@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The SM8150 Camera Clock controller was merged using the old arguments
for qcom_cc_really_probe(), correct this.
Fixes: ea73b7aceff6 ("clk: qcom: Add camera clock controller driver for SM8150")
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use of_property_present() to test for property presence rather than
of_(find|get)_property(). This is part of a larger effort to remove
callers of of_find_property() and similar functions.
of_(find|get)_property() leak the DT struct property and data pointers
which is a problem for dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731191312.1710417-4-robh@kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # clk-mstp.c
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Replace of_get_property() with the type specific
of_property_count_u32_elems() to get the property length.
This is part of a larger effort to remove callers of of_get_property()
and similar functions. of_get_property() leaks the DT property data
pointer which is a problem for dynamically allocated nodes which may
be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731201407.1838385-7-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add family-specific clock driver for RZ/V2H(P) SoCs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240729202645.263525-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add the module clock used by the PWM timers on the Renesas R-Car V4M
(R8A779H0) SoC.
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
[wsa: rebased]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240725194906.14644-9-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
There is a very minor difference between display clock controller
drivers for SM8550 and SM8650 platforms. Fold the second one into the
first one to reduce kernel footprint. The bindings for these two
hardware blocks are fully compatible.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240717-dispcc-sm8550-fixes-v2-6-5c4a3128c40b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Follow the recommendations and park disp_cc_mdss_esc[01]_clk_src to the
XO instead of disabling the clocks by using the clk_rcg2_shared_ops.
Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240717-dispcc-sm8550-fixes-v2-5-5c4a3128c40b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add missing POLL_CFG_GDSCR to the MDSS GDSC flags.
Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240717-dispcc-sm8550-fixes-v2-4-5c4a3128c40b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The clk_init_data instances are not changed at runtime. Mark them as
constant data.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240717-dispcc-sm8550-fixes-v2-3-5c4a3128c40b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
clk_dp_ops should only be used for DisplayPort pixel clocks. Use
clk_rcg2_ops for disp_cc_mdss_dptx1_aux_clk_src.
Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240717-dispcc-sm8550-fixes-v2-2-5c4a3128c40b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Fix seveal odd-looking places in SM8550's dispcc driver:
- duplicate entries in disp_cc_parent_map_4 and disp_cc_parent_map_5
- using &disp_cc_mdss_dptx0_link_div_clk_src as a source for
disp_cc_mdss_dptx1_usb_router_link_intf_clk
The SM8650 driver has been used as a reference.
Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240717-dispcc-sm8550-fixes-v2-1-5c4a3128c40b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for the camera clock controller for camera clients
to be able to request for camcc clocks on SM8150 platform.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20240731062916.2680823-8-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Regera PLL ops are required to control the Regera PLL from clock
controller drivers, hence add the Regera PLL ops and configure
function.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240731062916.2680823-6-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Zonda PLL has a 16 bit signed alpha and in the cases where the alpha
value is greater than 0.5, the L value needs to be adjusted accordingly.
Thus update the logic to handle the signed alpha val.
Fixes: f21b6bfecc27 ("clk: qcom: clk-alpha-pll: add support for zonda pll")
Cc: stable@vger.kernel.org
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240731062916.2680823-5-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Currently, clk_zonda_pll_set_rate polls for the PLL to lock even if the
PLL is disabled. However, if the PLL is disabled then LOCK_DET will
never assert and we'll return an error. There is no reason to poll
LOCK_DET if the PLL is already disabled, so skip polling in this case.
Fixes: f21b6bfecc27 ("clk: qcom: clk-alpha-pll: add support for zonda pll")
Cc: stable@vger.kernel.org
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240731062916.2680823-4-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Correct the pll postdiv shift used in clk_trion_pll_postdiv_set_rate
API. The shift value is not same for different types of plls and
should be taken from the pll's .post_div_shift member.
Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs")
Cc: stable@vger.kernel.org
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240731062916.2680823-3-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The PLL_POST_DIV_MASK should be 0 to (width - 1) bits. Fix it.
Fixes: 1c3541145cbf ("clk: qcom: support for 2 bit PLL post divider")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20240731062916.2680823-2-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The USB multiport controller needs a few additional resets, add these to
the driver.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240730-sc8180x-usb-mp-v2-2-a7dc4265b553@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the CLK_IGNORE_UNUSED flag to the vp-axi clock (CLK_VP_AXI) to avoid
depending on clk_ignore_unused in the cmdline. Without this fix, the
emmc-sdio clock (CLK_EMMC_SDIO) fails to work after vp-axi is disabled.
Signed-off-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/r/20240731061439.3807172-1-drew@pdp7.com
Fixes: ae81b69fd2b1 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add TMU PCLK clock in CMU_PERI unit. It acts simultaneously as an
interface clock (to access TMU registers) and an operating clock which
makes TMU IP-core functional.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240723163311.28654-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The default PLL2/3/4/6 multiplier and divider configurations are no
longer used after the conversion to fixed or variable fractional PLL
clock types.
Note that the default configurations are still documented in the
comments above the individual rcar_gen4_cpg_pll_config instances.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/d13526a86066992d6afdf9bee7c1a18da72f914f.1721648548.git.geert+renesas@glider.be
|
|
All users of the fixed default PLL2/3/4/6 clock types have been
converted to fixed or variable fractional PLL clock types.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/c0229eb3518444f61173c6fb83bdcedb058dd079.1721648548.git.geert+renesas@glider.be
|
|
The variable PLL2 clock type was superseded by the more generic
variable fractional 8.25 PLL clock type, and its sole user was converted.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/8e5564958002351f29435f63de1304fb3b51a725.1721648548.git.geert+renesas@glider.be
|
|
Currently, all PLLs are modelled as fixed divider clocks, based on the
state of the mode pins. However, the boot loader stack may have changed
the actual PLL configuration from the default, leading to incorrect
clock frequencies.
Describe PLL1 as a fixed fractional PLL instead, and PLL2, PLL3, PLL4,
and PLL6 as variable fractional PLLs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/3beac7c44534ed153ce7cea5c31f4b0bb7b16ab0.1721648548.git.geert+renesas@glider.be
|
|
Currently, all PLLs but PLL2 are modelled as fixed divider clocks, based
on the state of the mode pins. However, the boot loader stack may have
changed the actual PLL configuration from the default, leading to
incorrect clock frequencies.
Describe PLL1 as a fixed fractional PLL instead, and PLL2, PLL3, PLL4,
and PLL6 as variable fractional PLLs.
Reformat nearby lines to retain a consistent layout.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/b98523ed08de7386944c5ae860eae107dc28be3e.1721648548.git.geert+renesas@glider.be
|
|
Currently, all PLLs are modelled as fixed divider clocks, based on the
state of the mode pins. However, the boot loader stack may have changed
the actual PLL configuration from the default, leading to incorrect
clock frequencies.
Describe PLL1 as a fixed fractional PLL instead, and PLL2, PLL3, and
PLL6 as variable fractional PLLs. Note that the R-Car Gen4 clock driver
does not support variable 9.24 PLLs yet, so the driver will downgrade
them to fixed fractional PLLs, too.
Reformat nearby lines to retain a consistent layout.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/8544571f507e00ed6fc61617d27c9e19de5e9d11.1721648548.git.geert+renesas@glider.be
|
|
Add symbolic definitions for the various PLL control registers.
Replace hardcoded register offsets by the new definitions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/8cac464c7dfb15ecd299b8ab4ba88a16135f8123.1721648548.git.geert+renesas@glider.be
|
|
The custom clock driver that models the PLL clocks on R-Car Gen4
supports only fractional 8.25 PLLs, as used on R-Car V4H/V4M.
R-Car S4-8 uses integer and fractional multiplication fields that are
one bit larger resp. smaller, and a slightly different formula.
Extend the existing support to fractional 9.24 PLL, and introduce new
clock types and helper macros to describe these PLLs.
Note that there is no use case for variable fractional 9.24 PLLs yet, as
the Cortex-A55 cores on R-Car S4-8 do not support High Performance mode.
Hence the PLL is always modeled as a fixed PLL, regardless of the
description,
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/5684eda1260435c8eceabc274e0b18cb280a6341.1721648548.git.geert+renesas@glider.be
|
|
The custom clock driver that models PLL clocks on R-Car Gen4 supports
variable clocks, while PLL1 uses a similar control register layout, but
is read-only.
Extend the existing support to fixed clocks and PLL1, and introduce a
new clock type and helper macro to describe a fixed PLL.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/841fbb63d472c357b3ce291a5991db3b847f96d8.1721648548.git.geert+renesas@glider.be
|
|
The custom clock driver that models PLL clocks on R-Car Gen4 supports
PLL2 on R-Car V4H/V4M only, while PLL3, PLL4, and PLL6 use the same
control register layout.
Extend the existing support to PLL3, PLL4, and PLL6, and introduce a new
clock type and helper macro to describe these PLLs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/84ead759782560ec5643711e6bdd787a751053ce.1721648548.git.geert+renesas@glider.be
|
|
R-Car Gen4 PLLs support fractional multiplication, which can improve
accuracy when configuring a specific frequency.
Add support for fractional multiplication to the custom clock driver
for PLLs, which is currently used only for PLL2 on R-Car V4H.
While at it, add the missing blank line after the function.
Note that Fractional Multiplication is not enabled by the driver,
but used only if the boot loaded enabled it before.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/1a58ebef6f54460f49fb81ba9bbf288164de2646.1721648548.git.geert+renesas@glider.be
|
|
Add symbolic definitions for common CPG registers.
Replace hardcoded register offsets by the new definitions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/8ae48a5dac59cb5723fbca3842b93a9e51ffe1ca.1721648548.git.geert+renesas@glider.be
|
|
Improve readability by using the FIELD_GET() helper instead of
open-coding the same operation, and by adding field definitions to get
rid of hardcoded values.
While at it, move register definitions that are only used inside the
rcar-gen4-cpg.c source file out of the rcar-gen4-cpg.h header file.
Add a "CPG_" prefix to SD0CKCR1. Add comments where appropriate.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/fb19ad829738f02effa340fa04c178a162d41202.1721648548.git.geert+renesas@glider.be
|
|
The custom clock driver that models the PLL clocks on R-Car Gen4 assumes
the integer and fractional[*] multiplication field sizes as used on
R-Car V4H and V4M, representing a fractional 8.25 number.
Rename the related definitions, functions, and structures to clarify
this, and to prepare for the advent of support for the different field
sizes on R-Car S4-8.
[*] The fractional part is not yet supported.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/2ce9f9c75bfb6312129d416672f9691bbd11c0e7.1721648548.git.geert+renesas@glider.be
|
|
All SSMODE operations are done using CPG_PLLxCR0_SSMODE*.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/19f84bfec94eab5f301a9c33563c285ab59b9b2a.1721648548.git.geert+renesas@glider.be
|
|
register functions
Simplify the `rzg2l-cpg` driver by removing explicit passing of `clks` and
`base` parameters in various clock registration functions. These values
are now accessed directly from the `priv` structure.
While at it, drop masking of parent clocks with 0xffff as nothing is ever
stored in the high bits.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240715103555.507767-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
