summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2012-05-27Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds3-0/+2072
Pull arm-soc: soc specific changes (part 2) from Olof Johansson: "This adds support for the spear13xx platform, which has first been under review a long time ago and finally been completed after generic spear work has gone into the clock, dt and pinctrl branches. Also a number of updates for the samsung socs are part of this branch." Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much worse than they are: the exonys5 init code was refactored in commit fd454997d687 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and then commit f10590c9836c ("ARM: EXYNOS: add GPC4 bank instance") added a new gpio chip define and did tiny updates to the init code. So the conflict diff looks like hell, but it's actually a fairly simple change. * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: exynos: fix building with CONFIG_OF disabled ARM: EXYNOS: Add AUXDATA for i2c controllers ARM: dts: Update device tree source files for EXYNOS5250 ARM: EXYNOS: Add device tree support for interrupt combiner ARM: EXYNOS: Add irq_domain support for interrupt combiner ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5 ARM: EXYNOS: update irqs for EXYNOS5250 SoC ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll ARM: EXYNOS: add GPC4 bank instance ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition ARM: EXYNOS: Modify the GIC physical address for static io-mapping ARM: EXYNOS: Add watchdog timer clock instance pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res SPEAr: Update MAINTAINERS and Documentation SPEAr13xx: Add defconfig SPEAr13xx: Add compilation support SPEAr13xx: Add dts and dtsi files pinctrl: Add SPEAr13xx pinctrl drivers pinctrl: SPEAr: Create macro for declaring GPIO PINS SPEAr13xx: Add common clock framework support ...
2012-05-26Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-10/+12
Pull arm-soc device tree conversions (part 2) from Olof Johansson: "These continue the device tree work from part 1, this set is for the tegra, mxs and imx platforms, all of which have dependencies on clock or pinctrl changes submitted earlier." Fix up trivial conflicts due to nearby changes in drivers/{gpio/gpio,i2c/busses/i2c}-mxs.c * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: dt: tegra: invert status=disable vs status=okay ARM: dt: tegra: consistent basic property ordering ARM: dt: tegra: sort nodes based on bus order ARM: dt: tegra: remove duplicate device_type property ARM: dt: tegra: consistenly use lower-case for hex constants ARM: dt: tegra: format regs properties consistently ARM: dt: tegra: gpio comment cleanup ARM: dt: tegra: remove unnecessary unit addresses ARM: dt: tegra: whitespace cleanup ARM: dt: tegra cardhu: fix typo in SDHCI node name ARM: dt: tegra: cardhu: register core regulator tps62361 ARM: dt: tegra30.dtsi: Add SMMU node ARM: dt: tegra20.dtsi: Add GART node ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes ARM: dt: tegra: Add device tree support for AHB ARM: dts: enable audio support for imx28-evk ARM: dts: enable i2c device for imx28-evk i2c: mxs: add device tree probe support ARM: dts: enable mmc for imx28-evk ...
2012-05-16Merge branch 'clk-next' of git://git.linaro.org/people/mturquette/linux into ↵Arnd Bergmann1-1/+10
next/clock * 'clk-next' of git://git.linaro.org/people/mturquette/linux: clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ARM: Orion: SDIO: Add support for clk. ARM: Orion: NAND: Add support for clk, if there is one. ARM: Orion: EHCI: Add support for enabling clocks ARM: Orion: SATA: Add per channel clk/clkdev support. ARM: Orion: UART: Get the clock rate via clk_get_rate(). ARM: Orion: WDT: Add clk/clkdev support ARM: Orion: Eth: Add clk/clkdev support. ARM: Orion: SPI: Add clk/clkdev support. ARM: Orion: Add clocks using the generic clk infrastructure. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-16clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().Saravana Kannan1-1/+1
The clk_set_rate() code shouldn't check the clock's enable count when validating CLK_SET_RATE_GATE flag since the enable count could change after the validation. Similar to clk_set_parent(), it should instead check the prepare count. The prepare count should go to zero only when the end user expects the clock to not be enabled in the future. Since the code already grabs the prepare count before validation, it's not possible for prepare count to change after validation and by association not possible for a well behaving end user to enable the clock while the set rate is in progress. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> Reviewed-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-15clk: Provide dummy clk_unregister()Mark Brown1-0/+9
While there's no actual implementation behind it having the call to use in drivers makes them feel neater from a driver author point of view. An actual implementation can wait for someone who needs to use the function in a real system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [mturquette@linaro.org: void return type instead of int -EINVAL] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-14SPEAr13xx: Add common clock framework supportViresh Kumar3-0/+2072
This patch adds SPEAr1310 and SPEAr1340's clock framework support. It is based on earlier support for SPEAr3xx family. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Reviewed-by: Mike Turquette <mturquette@ti.com>
2012-05-13mmc: mxs-mmc: get rid of the use of cpu_is_xxxShawn Guo2-6/+6
The register HW_SSP_VERSION is broken for ssp version detection, as the address of the register is different between imx23 and imx28. Let's use platform_device_id to detect the device, so that the use of cpu_is_xxx can be removed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13Merge branch 'spear/clock' into next/clockArnd Bergmann10-1/+2014
Viresh Kumar <viresh.kumar@st.com> writes: This is rebased over a (merge of Mike's/clk-next & SPEAr's DT) + Russell's patch: CLKDEV: provide helpers for common clock framework rebased over them. * spear/clock: SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock Conflicts: drivers/clk/Makefile [Arnd: rebased again without the spear/dt branch] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-12SPEAr: Switch to common clock frameworkViresh Kumar3-0/+957
SPEAr SoCs used its own clock framework since now. From now on they will move to use common clock framework. This patch updates existing SPEAr machine support to adapt for common clock framework. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-05-12SPEAr: clk: Add General Purpose Timer Synthesizer clockViresh Kumar3-1/+172
All SPEAr SoC's contain GPT Synthesizers. Their Fout is derived from following equations: Fout= Fin/((2 ^ (N+1)) * (M+1)) This patch adds in support for this type of clock. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Reviewed-by: Mike Turquette <mturquette@linaro.org>
2012-05-12SPEAr: clk: Add Fractional Synthesizer clockViresh Kumar3-1/+182
All SPEAr SoC's contain Fractional Synthesizers. Their Fout is derived from following equations: Fout = Fin / (2 * div) (division factor) div is 17 bits:- 0-13 (fractional part) 14-16 (integer part) div is (16-14 bits).(13-0 bits) (in binary) Fout = Fin/(2 * div) Fout = ((Fin / 10000)/(2 * div)) * 10000 Fout = (2^14 * (Fin / 10000)/(2^14 * (2 * div))) * 10000 Fout = (((Fin / 10000) << 14)/(2 * (div << 14))) * 10000 div << 14 is simply 17 bit value written at register. This patch adds in support for this type of clock. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Reviewed-by: Mike Turquette <mturquette@linaro.org>
2012-05-12SPEAr: clk: Add Auxiliary Synthesizer clockViresh Kumar3-1/+242
All SPEAr SoC's contain Auxiliary Synthesizers. Their Fout is derived based on values of eq, x and y. Fout from synthesizer can be given from two equations: Fout1 = (Fin * X/Y)/2 EQ1 Fout2 = Fin * X/Y EQ2 This patch adds in support for this type of clock. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Reviewed-by: Mike Turquette <mturquette@linaro.org>
2012-05-12SPEAr: clk: Add VCO-PLL Synthesizer clockViresh Kumar5-0/+465
All SPEAr SoC's contain PLLs. Their Fout is derived based on following equations - In normal mode vco = (2 * M[15:8] * Fin)/N - In Dithered mode vco = (2 * M[15:0] * Fin)/(256 * N) pll_rate = vco/2^p vco and pll are very closely bound to each other, "vco needs to program: mode, m & n" and "pll needs to program p", both share common enable/disable logic and registers. This patch adds in support for this type of clock. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Reviewed-by: Mike Turquette <mturquette@linaro.org>
2012-05-12dma: mxs-dma: make platform_device_id more genericShawn Guo2-4/+4
Rewrite mxs_dma_is_apbh and mxs_dma_is_apbx in order to support other SoCs like imx6q and reform the platform_device_id for the better further dt support. Cc: Dan Williams <dan.j.williams@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Huang Shijie <b32955@freescale.com> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Vinod Koul <vinod.koul@intel.com>
2012-05-12ARM: mxs: add initial device tree support for imx23-evk boardShawn Guo1-0/+1
It adds initial device tree support for imx23-evk board, and only serial console is enabled. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Marek Vasut <marex@denx.de>
2012-05-12ARM: mxs: add initial device tree support for imx28-evk boardDong Aisheng1-0/+1
This patch includes basic dt support which can boot via nfs rootfs. Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Marek Vasut <marex@denx.de>
2012-05-11Merge branch 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann10-0/+1164
into next/clock Shawn Guo <shawn.guo@linaro.org> writes: mxs common clk porting for v3.5. It depends on the following two branches. [1] git://git.linaro.org/people/mturquette/linux.git clk-next [2] http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm.git clkdev As the mxs device tree conversion will constantly touch clock files, to save the conflicts, the updated mxs/dt branch coming later will based on this pull-request. * 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: remove now unused timer_clk argument from mxs_timer_init ARM: mxs: remove old clock support ARM: mxs: switch to common clk framework ARM: mxs: change the lookup name for fec phy clock ARM: mxs: request clock for timer clk: mxs: add clock support for imx28 clk: mxs: add clock support for imx23 clk: mxs: add mxs specific clocks Includes an update to Linux 3.4-rc6 Conflicts: drivers/clk/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-11Merge branch 'depends/rmk/clkdev' into next/clockArnd Bergmann1-10/+132
* depends/rmk/clkdev: CLKDEV: provide helpers for common clock framework ARM: 7392/1: CLKDEV: Optimize clk_find() ARM: 7376/1: clkdev: Implement managed clk_get()
2012-05-09clk: add a fixed factor clockSascha Hauer2-1/+96
Having fixed factors/dividers in hardware is a common pattern, so add a basic clock type doing this. It basically describes a fixed factor clock using a nominator and a denominator. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> [mturquette@linaro.org: constify parent_names in static init macro] [mturquette@linaro.org: copy/paste bug from mux in static init macro] [mturquette@linaro.org: fix error handling in clk_register_fixed_factor] [mturquette@linaro.org: improve division accuracy; thanks to Saravana] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-09clk: mux: assign init dataMike Turquette1-0/+1
The original conversion to struct clk_hw_init failed to add the pointer assignment in clk_register_mux. Signed-off-by: Mike Turquette <mturquette@linaro.org> Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-09clk: remove COMMON_CLK_DISABLE_UNUSEDMike Turquette2-13/+0
Exposing this option generates confusion and incorrect behavior for single-image builds across platforms. Enable this behavior permanently. Signed-off-by: Mike Turquette <mturquette@linaro.org> Acked-by: Saravana Kannan <skannan@codeaurora.org>
2012-05-09clk: prevent spurious parent rate propagationMike Turquette1-1/+6
Patch 'clk: always pass parent_rate into .round_rate' made a subtle change to the semantics of .round_rate. It is now expected for the parent's rate to always be passed in, simplifying the implemenation of various .round_rate callback definitions. However the patch also introduced a bug in clk_calc_new_rates whereby a clock without the CLK_SET_RATE_PARENT flag set could still propagate a rate change up to a parent clock if the the .round_rate callback modified the &best_parent_rate value in any way. This patch fixes the issue at the framework level (in clk_calc_new_rates) by specifically handling the case where the CLK_SET_RATE_PARENT flag is not set. Signed-off-by: Mike Turquette <mturquette@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-08ARM: mxs: remove now unused timer_clk argument from mxs_timer_initShawn Guo2-2/+2
With old mxs clock support removed, the timer_clk argument of mxs_timer_init is unused now, so remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-08ARM: mxs: switch to common clk frameworkShawn Guo1-0/+2
It switches mxs clock support to common clk framework based drivers. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-08clk: mxs: add clock support for imx28Shawn Guo2-0/+338
Add imx28 clock support based on common clk framework. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-08clk: mxs: add clock support for imx23Shawn Guo2-0/+206
Add imx23 clock support based on common clk framework. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-08clk: mxs: add mxs specific clocksShawn Guo7-0/+618
Add mxs specific clocks, pll, reference clock (PFD), integer divider and fractional divider. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-02CLKDEV: provide helpers for common clock frameworkRussell King1-6/+78
The common clock framework allocates clocks dynamically. Provide a set of helpers to streamline the clkdev registration of the clock lookups to avoid repetitive code sequences. Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-02clk: clk_set_rate() must fail if CLK_SET_RATE_GATE is set and clk is enabledViresh Kumar1-0/+5
This is well documented but isn't implemented. clk_set_rate() must check if flags have CLK_SET_RATE_GATE bit set and is enabled too. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-02clk: Use a separate struct for holding init data.Saravana Kannan5-53/+89
Create a struct clk_init_data to hold all data that needs to be passed from the platfrom specific driver to the common clock framework during clock registration. Add a pointer to this struct inside clk_hw. This has several advantages: * Completely hides struct clk from many clock platform drivers and static clock initialization code that don't care for static initialization of the struct clks. * For platforms that want to do complete static initialization, it removed the need to directly mess with the struct clk's fields while still allowing to statically allocate struct clk. This keeps the code more future proof even if they include clk-private.h. * Simplifies the generic clk_register() function and allows adding optional fields in the future without modifying the function signature. * Simplifies the static initialization of clocks on all platforms by removing the need for forward delcarations or convoluted macros. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [mturquette@linaro.org: kept DEFINE_CLK_* macros and __clk_init] Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jamie Iles <jamie@jamieiles.com> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca>
2012-04-25clk: select CLKDEV_LOOKUP for COMMON_CLKRob Herring1-0/+1
Using the common clock infrastructure without the common clkdev code makes little sense, so select CLKDEV_LOOKUP for COMMON_CLK. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-04-25clk: Don't set clk->new_rate twiceViresh Kumar1-1/+1
if (!clk->ops->round_rate && (clk->flags & CLK_SET_RATE_PARENT)) is true, then we don't need to set clk->new_rate here, as we will call clk_calc_subtree() afterwards and it also sets clk->new_rate. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-25clk: clk-gate: Create clk_gate_endisable()Viresh Kumar1-29/+25
This patch tries to remove duplicate code for clk_gate clocks. This creates another routine clk_gate_endisable() which will take care of enable/disable clock with knowledge of CLK_GATE_SET_TO_DISABLE flag. It works on following logic: For enabling clock, enable = 1 set2dis = 1 -> clear bit -> set = 0 set2dis = 0 -> set bit -> set = 1 For disabling clock, enable = 0 set2dis = 1 -> set bit -> set = 1 set2dis = 0 -> clear bit -> set = 0 So, result is always: enable xor set2dis. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-25clk: propagate round_rate for CLK_SET_RATE_PARENT caseShawn Guo1-2/+6
Need to propagate round_rate call for the clk that has no .round_rate operation but with flag CLK_SET_RATE_PARENT set. For example, clk_mux is a clk with no .round_rate operation. However, it could likely be in a clk_set_rate propagation path, saying it has parent clk who has .round_rate and .set_rate operations. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-25clk: pass parent_rate into .set_rateShawn Guo2-3/+4
For most of .set_rate implementation, parent_rate will be used, so just like passing parent_rate into .recalc_rate, let's pass parent_rate into .set_rate too. It also updates the kernel doc for .set_rate ops. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-25clk: always pass parent_rate into .round_rateShawn Guo2-18/+10
The parent_rate will likely be used by most .round_rate implementation no matter whether flag CLK_SET_RATE_PARENT is set or not, so let's always pass parent_rate into .round_rate. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-25clk: basic: improve parent_names & return errorsMike Turquette4-54/+64
This patch is the basic clk version of 'clk: core: copy parent_names & return error codes'. The registration functions are changed to allow the core code to copy the array of strings and allow platforms to declare those arrays as __initdata. This patch also converts all of the basic clk registration functions to return error codes which better aligns them with the existing clk.h api. Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-25clk: core: copy parent_names & return error codesMike Turquette1-12/+53
This patch cleans up clk_register and solves a few bugs by teaching clk_register and __clk_init to return error codes (instead of just NULL) to better align with the existing clk.h api. Along with that change this patch also introduces a new behavior whereby clk_register copies the parent_names array, thus allowing platforms to declare their parent_names arrays as __initdata. Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-25clk: Constify parent name arraysMark Brown2-2/+2
Drivers should be able to declare their arrays of parent names as const so the APIs need to accept const arguments. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [mturquette@linaro.org: constified gate] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-25clk: Make clk_get_rate() return 0 on errorRajendra Nayak1-3/+3
Most users of clk_get_rate() actually assume a non zero return value as a valid rate returned. Returing -EINVAL might confuse such users, so make it instead return zero on error. Besides the return value of clk_get_rate seems to be 'unsigned long'. Signed-off-by: Rajendra nayak <rnayak@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-25clk: add "const" for clk_ops of basic clksShawn Guo4-4/+4
The clk_ops of basic clks should have "const" to match the definition in "struct clk" and clk_register prototype. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-25clk: remove unnecessary EXPORT_SYMBOL_GPLShawn Guo4-9/+0
It makes no sense to have EXPORT_SYMBOL_GPL on static functions. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-25clk: use kzalloc in clk_register_muxShawn Guo1-1/+1
Change clk_register_mux to use kzalloc, just like what all other basic clk registration functions do. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-25clk: core: enforce clk_ops consistencyMike Turquette1-0/+14
Documentation/clk.txt has some handsome ASCII art outlining which clk_ops are mandatory for a given clock, given the capability of the hardware. Enforce those mandates with sanity checks in __clk_init. Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-25clk: core: clk_calc_new_rates handles NULL parentsMike Turquette1-8/+21
It is possible to call clk_set_rate on a clock with a NULL parent. One such example is an adjustable-rate root clock. Ensure that clk_calc_new_rates does not dereference parent without checking first and also handle the corner cases gracefully. Reported-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-25clk: core: remove dead code pathsMike Turquette1-4/+2
Some static inline dummy functions were left over from before the clock core was consolidated from several C files down to one. Remove them. Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-25clk: core: correct clk_set_rate kerneldocMike Turquette1-30/+11
Remove old and misleading documentation from the previous clk_set_rate implementaion. Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-19ARM: 7392/1: CLKDEV: Optimize clk_find()viresh kumar1-4/+9
clk_find must return as soon as it gets the correct clock. Currently it check all clocks until it found a lookup with both dev_id and con_id matching. If only one of them is passed, then we don't actually need to wait for both of them to match. We can quit as soon as the requested id (dev_id or con_id) matches. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-19ARM: 7376/1: clkdev: Implement managed clk_get()Mark Brown1-0/+45
Allow clk API users to simplify their cleanup paths by providing a managed version of clk_get() and clk_put(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-19clk: make CONFIG_COMMON_CLK invisibleArnd Bergmann1-9/+6
All platforms that use the common clk infrastructure should select COMMON_CLK from platform code, and on all other platforms, it must not be enabled, so there is no point making the option visible to users, and when it is visible, we break randconfig builds. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 11:26:32 +0300