summaryrefslogtreecommitdiff
path: root/drivers/clk/ux500
AgeCommit message (Collapse)AuthorFilesLines
2022-05-18clk: ux500: fix a possible off-by-one in u8500_prcc_reset_base()Hangyu Hua1-1/+1
Off-by-one will happen when index == ARRAY_SIZE(ur->base). Fixes: b14cbdfd467d ("clk: ux500: Add driver for the reset portions of PRCC") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20220518062537.17933-1-hbh25y@gmail.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-26clk: ux500: Implement the missing CLKOUT clocksLinus Walleij3-7/+199
This implements the two missing CLKOUT clocks for the ux500 (well really U8500/DB8500) SoC. The clocks are initialized using a specific parent and divider and these are specified in the device tree, see the separate binding patch. The implementation is a bit different in that it will only create the clock in the clock framework if a user appears in the device tree, rather than it being registered upfront like most of the other clocks. This is because the clock needs parameters for source and divider from the consumer phandle for the clock to be set up properly when the clock is registered. There could be more than one user of a CLKOUT clock, but we have not seen this in practice. If this happens the framework prints and info and returns the previously registered clock. Using the clocks requires also muxing the CLKOUT1 or CLKOUT2 to the appropriate pad. In practice this is achived in a pinctrl handle in the DTS node for the device using the CLKOUT clock, so this muxing is done separately from the clock itself. Example: haptic@49 { compatible = "immersion,isa1200"; reg = <0x49>; (...) /* clkout1 from ACLK divided by 8 */ clocks = <&clkout_clk DB8500_CLKOUT_1 DB8500_CLKOUT_SRC_ACLK 8>; pinctrl-names = "default"; pinctrl-0 = <&isa1200_janice_default>; }; isa1200_janice_default: isa1200_janice { /* Bring out clkout1 on pin GPIO227 pin AH7 */ janice_mux { function = "clkout"; groups = "clkout1_a_1"; }; janice_cfg1 { pins = "GPIO227_AH7"; ste,config = <&out_lo>; }; (...) This was tested successfully with the Immersion ISA1200 haptic feedback unit on the Samsung Galaxy S Advance GT-I9070 (Janice) mobile phone. As the CLKOUT clocks need some undefined fixed rate parent clocks that are currently missing from the PRCMU clock implementation, the three simplest are added in this patch: clk38m_to_clkgen, aclk and sysclk. The only parent not yet available in the implementation is clk009, which is a kind of special muxed and divided clock which isn't even implemented in the vendor clock driver. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220414221751.323525-6-linus.walleij@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-26clk: ux500: Rewrite PRCMU clocks to use clk_hw_*Linus Walleij3-209/+183
This rewrites all the u8500 PRCMU clocks and helper functions to handle clocks using struct clk_hw rather than struct clk, as is normal for modern clock drivers. Use clk_hw_register(), of_clk_add_hw_provider() and stack all the clocks into a compile-time dynamic array of struct clk_hw_onecell_data. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220414221751.323525-5-linus.walleij@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-26clk: ux500: Drop .is_prepared state from PRCMU clocksLinus Walleij1-27/+2
The core already keeps a software prepare count. Drop this custom software prepare count. The only semantic difference is that if disabling the clock fails, .is_prepared() will still return 1, but this will only serve to confuse the framework, the error message is sufficient. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220414221751.323525-4-linus.walleij@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-26clk: ux500: Drop .is_enabled state from PRCMU clocksLinus Walleij1-35/+0
The core already keeps a software enable count. Drop this custom software enable count. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220414221751.323525-3-linus.walleij@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-27clk: ux500: Add driver for the reset portions of PRCCLinus Walleij5-13/+243
The Ux500 PRCC (peripheral reset and clock controller) can also control reset of the IP blocks, not just clocks. As the PRCC is probed as a clock controller and we have other platforms implementing combined clock and reset controllers, follow this pattern and implement the PRCC rest controller as part of the clock driver. The reset controller needs to be selected from the machine as Ux500 has traditionally selected its mandatory subsystem prerequisites from there. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210921184803.1757916-2-linus.walleij@linaro.org Acked-by: Ulf Hansson <ulf.hansson@linaro.org> [sboyd@kernel.org: Dropped allocation error message] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-09mfd: db8500-prcmu: Handle missing FW variantLinus Walleij1-1/+2
There was an "unknown" firmware variant turning up in the wild causing problems in the clock driver. Add this missing variant and clarify that varian 11 and 15 are Samsung variants, as this is now very well known from released products. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-05clk: ux500: Fix up the SGA clock for some variantsLinus Walleij1-0/+2
Some of the special PRCMU firmware variants were not properly detected in the Ux500 clock driver, resulting in the wrong clock for the SGA. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lkml.kernel.org/r/20191217210504.27888-1-linus.walleij@linaro.org Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194Thomas Gleixner6-12/+6
Based on 1 normalized pattern(s): license terms gnu general public license gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 161 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-11clk: ux500: add range to usleep_rangeNicholas Mc Guire1-1/+2
Providing a range for usleep_range() allows the hrtimer subsystem to coalesce timers - the delay is runtime configurable so a factor 2 is taken to provide the range. With the expected range for enable_delay_us being milliseconds, the range should lie in the 250us range which is sufficient for hrtimer optimization. Signed-off-by: Nicholas Mc Guire <hofrat@opentech.at> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-15clk: Use of_node_name_eq for node name comparisonsRob Herring1-5/+5
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which all of these are. Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-renesas-soc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> (clk-mstp) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (ux500) Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-23clk: ux500: Drop AB8540/9540 supportLinus Walleij4-633/+0
The AB8540 was an evolved version of the AB8500, but it was never mass produced or put into products, only reference designs exist. The upstream support was never completed and it is unlikely that this will happen so drop the support for now to simplify maintenance of the AB8500. Cc: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2017-11-18Merge tag 'clk-for-linus' of ↵Linus Torvalds3-12/+6
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have two changes to the core framework this time around. The first being a large change that introduces runtime PM support to the clk framework. Now we properly call runtime PM operations on the device providing a clk when the clk is in use. This helps on SoCs where the clks provided by a device need something to be powered on before using the clks, like power domains or regulators. It also helps power those things down when clks aren't in use. The other core change is a devm API addition for clk providers so we can get rid of a bunch of clk driver remove functions that are just doing of_clk_del_provider(). Outside of the core, we have the usual addition of clk drivers and smattering of non-critical fixes to existing drivers. The biggest diff is support for Mediatek MT2712 and MT7622 SoCs, but those patches really just add a bunch of data. By the way, we're trying something new here where we build the tree up with topic branches. We plan to work this into our workflow so that we don't step on each other's toes, and so the fixes branch can be merged on an as-needed basis. Summary: Core: - runtime PM support for clk providers - devm API for of_clk_add_hw_provider() New Drivers: - Mediatek MT2712 and MT7622 - Renesas R-Car V3M SoC Updates: - runtime PM support for Samsung exynos5433/exynos4412 providers - removal of clkdev aliases on Samsung SoCs - convert clk-gpio to use gpio descriptors - various driver cleanups to match kernel coding style - Amlogic Video Processing Unit VPU and VAPB clks - sigma-delta modulation for Allwinner audio PLLs - Allwinner A83t Display clks - support for the second display unit clock on Renesas RZ/G1E - suspend/resume support for Renesas R-Car Gen3 CPG/MSSR - new clock ids for Rockchip rk3188 and rk3368 SoCs - various 'const' markings on clk_ops structures - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: stm32h7: fix test of clock config clk: pxa: fix building on older compilers clk: sunxi-ng: a83t: Fix i2c buses bits clk: ti: dra7-atl-clock: fix child-node lookups clk: qcom: common: fix legacy board-clock registration clk: uniphier: fix DAPLL2 clock rate of Pro5 clk: uniphier: fix parent of miodmac clock data clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu' clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep() clk: hi3660: fix incorrect uart3 clock freqency clk: kona-setup: Delete error messages for failed memory allocations ARC: clk: fix spelling mistake: "configurarion" -> "configuration" clk: cdce925: remove redundant check for non-null parent_name clk: versatile: Improve sizeof() usage clk: versatile: Delete error messages for failed memory allocations clk: ux500: Improve sizeof() usage clk: ux500: Delete error messages for failed memory allocations clk: spear: Delete error messages for failed memory allocations clk: ti: Delete error messages for failed memory allocations clk: mmp: Adjust checks for NULL pointers ...
2017-11-14clk: ux500: Improve sizeof() usageMarkus Elfring3-3/+3
Replace the specification of data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-14clk: ux500: Delete error messages for failed memory allocationsMarkus Elfring3-9/+3
Omit extra messages for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31clk: ux500: prcc: constify clk_ops.Arvind Yadav1-3/+3
clk_ops are not supposed to change at runtime. All functions working with clk_ops provided by <linux/clk-provider.h> work with const clk_ops. So mark the non-const clk_ops as const. Here, Function "clk_reg_prcc" is used to initialized clk_init_data. clk_init_data is working with const clk_ops. So make clk_reg_prcc non-const clk_ops argument as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-31clk: ux500: sysctrl: constify clk_ops.Arvind Yadav1-4/+4
clk_ops are not supposed to change at runtime. All functions working with clk_ops provided by <linux/clk-provider.h> work with const clk_ops. So mark the non-const clk_ops as const. Here, Function "clk_reg_sysctrl" is used to initialized clk_init_data. clk_init_data is working with const clk_ops. So make clk_reg_sysctrl non-const clk_ops argument as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-31clk: ux500: prcmu: constify clk_ops.Arvind Yadav1-7/+7
clk_ops are not supposed to change at runtime. All functions working with clk_ops provided by <linux/clk-provider.h> work with const clk_ops. So mark the non-const clk_ops as const. Here, Function "clk_reg_prcmu" is used to initialized clk_init_data. clk_init_data is working with const clk_ops. So make clk_reg_prcmu non-const clk_ops argument as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-27clk: ux500: Convert ABx500 clocks to use OF probingLinus Walleij1-10/+26
These clocks have been broken for a long time unfortunately, a hurdle of misc problems made them stop working at some point breaking USB and audio on Ux500. The platform as such and all "regular" clocks are migrated to OF/device tree, so let's migrate also this driver. With this patch and the corresponding DTS fixes, and a bunch of probe deferral fixes, audio starts working again on Ux500. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-27clk: ux500: move AB8500 sysclk over to PRCMU clk driverLinus Walleij2-8/+3
The AB8500 sysclk is just another PRCMU-controlled clock, there is no reason why it should be in the ABx500-controlled part of the clock implementation. Doing this and the corresponding device tree changes makes USB work on the Ux500 again. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-12ARM: ux500: use CLK_OF_DECLARE()Arnd Bergmann3-30/+6
The ux500 DT support predates the CLK_OF_DECLARE macro and calls directly into the clk driver from platform code. Converting this to CLK_OF_DECLARE makes the code much nicer and similar to how modern platforms do it today. It also removes the last user of cpu_is_u8500_family() etc. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-03clk: ux500: Remove CLK_IS_ROOTStephen Boyd3-84/+75
This flag is a no-op now. Remove usage of the flag. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-25clk/ARM: move Ux500 PRCC bases to the device treeLinus Walleij3-154/+209
The base addresses for the Ux500 PRCC controllers are hardcoded, let's move them to the clock node in the device tree and delete the constants. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-25clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw)Stephen Boyd2-9/+9
Use the provider based method to get a clock's name so that we can get rid of the clk member in struct clk_hw one day. Mostly converted with the following coccinelle script. @@ struct clk_hw *E; @@ -__clk_get_name(E->clk) +clk_hw_get_name(E) Acked-by: Heiko Stuebner <heiko@sntech.de> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Bresticker <abrestic@chromium.org> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kevin Cernekee <cernekee@chromium.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-25clk: ux500: delete the non-DT U8500 clock implementationLinus Walleij2-526/+0
This code is unused and not coming back. Let's kill it off. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20clk: ux500: Remove clk.h and clkdev.h includesStephen Boyd6-8/+2
Clock provider drivers generally shouldn't include clk.h because it's the consumer API. Remove the include here because this is a provider driver. Also remove clkdev.h in files that aren't using it. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-07clk: ux500: ape[ate|trace]clk are scaleableLinus Walleij2-5/+6
The APEATCLK and APETRACECLK are actually scaleable so register them as scaleable clocks. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-01-27clk: ux500: Drop use of clk-private.hStephen Boyd2-2/+0
These drivers don't need to include clk-private.h. Remove the include. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-10-20clk: ux500: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-02-24clk: ux500: Staticize ux500_twocell_getSachin Kamat1-1/+2
ux500_twocell_get is a local symbol. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-12-20clk: ux500: Remove extra semicolonSachin Kamat1-1/+1
Extra semicolon is redundant. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-18clk: ux500: fix erroneous bit assignmentLinus Walleij1-1/+1
Due to a typo or similar, the peripheral group 2 clock 11 gate was set to bit 1 instead of bit 11. We need to fix this to be able to set the correct enable bit in the device tree: when trying to correct the bit assignment in the device tree, the system would hang. Cc: Mike Turquette <mturquette@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Provide a look-up for the ARMSS clockLee Jones1-0/+1
The ARMSS clock is used by the newly DT enabled CPUFreq driver. Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Add Device Tree support for the TWD clockLee Jones1-2/+5
This patch enables the TWD fixed factor clock to be specified from Device Tree via phandles to the "smp-twd-clock" node. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Add Device Tree support for the RTC clockLee Jones1-2/+5
This patch enables the RTC fixed frequency clock to be specified from Device Tree via phandles to the "rtc32k-clock" node. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Add Device Tree support for the PRCC Kernel clockLee Jones1-0/+32
This patch enables clocks to be specified from Device Tree via phandles to the "prcc-kernel-clock" node. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Add Device Tree support for the PRCC Peripheral clockLee Jones1-0/+52
This patch enables clocks to be specified from Device Tree via phandles to the "prcc-periph-clock" node. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Add Device Tree support for the PRCMU clockLee Jones1-2/+48
This patch enables clocks to be specified from Device Tree via phandles to the "prcmu-clock" node. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Add a 2-cell Device Tree parser for obtaining PRCC clocksLee Jones1-0/+22
PRCC (peripheral and kernel) clocks are specified using a property tuple <&phandle base bit>, where 'base' is the peripheral (1, 2, 3, 5 or 6), and bit is read-in value into that peripheral stipulated by the hardware specification. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Provide u8500_clk with skeleton Device Tree supportLee Jones1-0/+19
The functional components will be added on a per-clock basis. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Copy u8500_clk_init() ready for DT enablementLee Jones2-0/+382
Here we're using the old clock initialisation function as a template. It's necessary to remove all of the clk_register_clkdev() calls as they don't make sense when booting with Device Tree. Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Remove BML8580 clockLee Jones1-1/+1
There is no mention of the PRCMU_BML8580CLK in any of the Design Specifications for the chips supported in Mainline. In fact, where it is incorrectly used in the u8540 clock definition driver it would have the side effect of using the incorrect clock management address ([PRCM_BML8580CLK_MGT] 0x108 instead of the correct value 0x04C). Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-03Merge tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds3-9/+567
Pull clock framework updates from Mike Turquette: "The common clock framework changes for 3.11 include new clock drivers across several different platforms and architectures, fixes to existing drivers, a MAINTAINERS file fix and improvements to the basic clock types that allow them to be of use to more platforms than before. Only a few fixes to the core framework are included with most all of the changes landing in the various clock drivers themselves." * tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linux: (55 commits) clk: tegra: fix ifdef for tegra_periph_reset_assert inline clk: tegra: provide tegra_periph_reset_assert alternative clk: exynos4: Fix clock aliases for cpufreq related clocks clk: samsung: Add MUX_FA macro to pass flag and alias clk: add support for Rockchip gate clocks clk: vexpress: Make the clock drivers directly available for arm64 clk: vexpress: Use full node name to identify individual clocks clk: tegra: T114: add DFLL DVCO reset control clk: tegra: T114: add DFLL source clocks clk: tegra: T114: add FCPU clock shaper programming, needed by the DFLL clk: gate: add CLK_GATE_HIWORD_MASK clk: divider: add CLK_DIVIDER_HIWORD_MASK flag clk: mux: add CLK_MUX_HIWORD_MASK clk: Always notify whole subtree when reparenting MAINTAINERS: make drivers/clk entry match subdirs clk: honor CLK_GET_RATE_NOCACHE in clk_set_rate clk: use clk_get_rate() for debugfs clk: tegra: Use override bits when needed clk: tegra: override bits for Tegra30 PLLM clk: tegra: override bits for Tegra114 PLLM ...
2013-06-07clk: ux500: Clocks definition for u8540Philippe Begnic1-1/+559
First clocks definition version of PRCMU and PRCC clocks for u8540 platform Signed-off-by: Philippe Begnic <philippe.begnic@st.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-07clk: ux500: Pass clock base adresses in initcall for u8540 and u9540Philippe Begnic2-4/+4
Align on u8500 version, pass clock base address in clk_init functions for u8540 and u9540. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Philippe Begnic <philippe.begnic@st.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-05-29clk: ux500: clk-sysctrl: handle clocks with no parentsFabio Baltieri1-1/+7
Fix clk_reg_sysctrl() to set main clock registers of new struct clk_sysctrl even if the registered clock has no parents. This fixes an issue where "ulpclk" was registered with all clk->reg_* fields uninitialized, causing a -EINVAL error from clk_prepare(). Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-05-29clk: ux500: Provide device enumeration number suffix for SMSC911xLee Jones1-1/+1
First Ethernet device has a ".0" appended onto the device name. It appears that we need this in order to obtain the correct clock. Without this fix Ethernet does not function on Ux500 devices, which is a regression. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: improved changelog]
2013-05-29clk: ux500: abx500-clk: rename ux500 audio codec aliasesFabio Baltieri1-4/+4
Change soc-audio related clk_register_clkdev() device names to reflect the ones actually used in current snd-soc-mop500 and ab8500-codec drivers. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-05-02Merge tag 'multiplatform-for-linus' of ↵Linus Torvalds2-72/+71
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform updates from Olof Johansson: "More multiplatform enablement for ARM platforms. The ones converted in this branch are: - bcm2835 - cns3xxx - sirf - nomadik - msx - spear - tegra - ux500 We're getting close to having most of them converted! One of the larger platforms remaining is Samsung Exynos, and there are a bunch of supporting patches in this merge window for it. There was a patch in this branch to a early version of multiplatform conversion, but it ended up being reverted due to need of more bake time. The revert commit is part of the branch since it would have required rebasing multiple dependent branches and they were stable by then" * tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms clocksource: nomadik-mtu: fix up clocksource/timer Revert "ARM: exynos: enable multiplatform support" ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: exynos: enable multiplatform support rtc: s3c: make header file local mtd: onenand/samsung: make regs-onenand.h file local thermal/exynos: remove unnecessary header inclusions mmc: sdhci-s3c: remove platform dependencies ARM: samsung: move mfc device definition to s5p-dev-mfc.c ARM: exynos: move debug-macro.S to include/debug/ ARM: exynos: prepare for sparse IRQ ARM: exynos: introduce EXYNOS_ATAGS symbol ARM: tegra: build assembly files with -march=armv7-a ARM: Push selects for TWD/SCU into machine entries ARM: ux500: build hotplug.o for ARMv7-a ARM: ux500: move to multiplatform ARM: ux500: make remaining headers local ARM: ux500: make irqs.h local to platform ARM: ux500: get rid of <mach/[hardware|db8500-regs].h> ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-03 12:55:22 +0300