summaryrefslogtreecommitdiff
path: root/drivers/clk/samsung/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2023-01-16clk: remove s3c24xx driverArnd Bergmann1-32/+0
The s3c24xx platform is gone, so the clk driver can be removed as well. Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-02-01clk: samsung: fix missing Tesla FSD dependency on ExynosKrzysztof Kozlowski1-0/+1
The Tesla FSD clock controller driver uses shared parts from Exynos ARM64 clock drivers, so add proper dependency to fix COMPILE_TEST build errors like: /usr/bin/aarch64-linux-gnu-ld: drivers/clk/samsung/clk-fsd.o: in function `fsd_cmu_probe': clk-fsd.c:(.init.text+0x9c): undefined reference to `exynos_arm64_register_cmu' Reported-by: kernel test robot <lkp@intel.com> Fixes: e3f3dc3810d3 ("clk: samsung: fsd: Add cmu_peric block clock information") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220129173407.278591-1-krzysztof.kozlowski@canonical.com
2022-01-26clk: samsung: fsd: Add initial clock supportAlim Akhtar1-0/+8
Add initial clock support for FSD (Full Self-Driving) SoC which is required to bring-up platforms based on this SoC. Cc: linux-fsd@tesla.com Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20220124141644.71052-5-alim.akhtar@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-10-18clk: samsung: describe drivers in KconfigKrzysztof Kozlowski1-10/+20
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20210924133624.112593-1-krzysztof.kozlowski@canonical.com Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2020-12-21Merge tag 'clk-for-linus' of ↵Linus Torvalds1-2/+65
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework got some nice improvements this time around. We gained the ability to get struct clk pointers from a struct clk_hw so that clk providers can consume the clks they provide, if they need to do something like that. This has been a long missing part of the clk provider API that will help us move away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are added for the clk_set_rate() "range" functions, similar to the tracepoints we already have for clk_set_rate() and we added a column to debugfs to help developers understand the hardware enable state of clks in case firmware or bootloader state is different than what is expected. Overall the core changes are mostly improving the clk driver writing experience. At the driver level, we have the usual collection of driver updates and new drivers for new SoCs. This time around the Qualcomm folks introduced a good handful of clk drivers for various parts of three or four SoCs. The SiFive folks added a new clk driver for their FU740 SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that for various new features. One last thing to note in the driver area is that the i.MX driver has gained a new binding to support SCU clks after being on the list for many months. It uses a two cell binding which is sort of rare in clk DT bindings. Beyond that we have the usual set of driver fixes and tweaks that come from more testing and finding out that some configuration was wrong or that a driver could support being built as a module. Summary: Core: - Add some trace points for clk_set_rate() "range" functions - Add hardware enable information to clk_summary debugfs - Replace clk-provider.h with of_clk.h when possible - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw New Drivers: - Bindings for Canaan K210 SoC clks - Support for SiFive FU740 PRCI - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs Updates: - DVFS support for AT91 clk driver - Update git repo branch for Renesas clock drivers - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E - Stop using __raw_*() I/O accessors in Renesas clk drivers - One more conversion of DT bindings to json-schema - Make i.MX clk-gate2 driver more flexible - New two cell binding for i.MX SCU clks - Drop of_match_ptr() in i.MX8 clk drivers - Add arch dependencies for Rockchip clk drivers - Fix i2s on Rockchip rk3066 - Add MIPI DSI clks on Amlogic axg and g12 SoCs - Support modular builds of Amlogic clk drivers - Fix an Amlogic Video PLL clock dependency - Samsung Kconfig dependencies updates for better compile test coverage - Refactoring of the Samsung PLL clocks driver - Small Tegra driver cleanups - Minor fixes to Ingenic and VC5 clk drivers - Cleanup patches to remove unused variables and plug memory leaks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" clk: ingenic: Fix divider calculation with div tables clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 clk: si5351: Wait for bit clear after PLL reset clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error ...
2020-11-23clk: samsung: Allow compile testing of Exynos, S3C64xx and S5Pv210Krzysztof Kozlowski1-2/+65
So far all Exynos, S3C64xx and S5Pv210 clock units were selected by respective SOC/ARCH Kconfig option. On a kernel built for selected SoCs, this allowed to build only limited set of matching clock drivers. However compile testing was not possible in such case as Makefile object depends on SOC/ARCH option. Add separate Kconfig options for each of them to be able to compile test. Link: https://lore.kernel.org/r/20201119164509.754851-1-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2020-11-12clk: samsung: allow building the clkout driver as moduleKrzysztof Kozlowski1-0/+10
The Exynos clock output driver can be built as module (it does not have to be part of core init process) for better customization. Adding a KConfig entry allows also compile testing for build coverage. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201110193749.261367-1-krzk@kernel.org
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-14clk: samsung: Allow modular build of the Audio Subsystem CLKCON driverSylwester Nawrocki1-0/+9
Any clock dependencies can be properly handled with deferred probing so we can remove core_initcall and switch to a proper loadable platform driver module. This change has been tested on Exynos4412 Odroid U3 based board. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1467987300-31450-1-git-send-email-s.nawrocki@samsung.com
2016-02-22clk: samsung: Don't build ARMv8 clock drivers on ARMv7Krzysztof Kozlowski1-1/+9
Currently the Exynos5433 (ARMv8 SoC) clock driver depends on ARCH_EXYNOS so it is built also on ARMv7. This does not bring any kind of benefit. There won't be a single kernel image for ARMv7 and ARMv8 SoCs (like multi_v7 for ARMv7). Instead build clock drivers only for respective SoC's architecture. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-02-17clk: samsung: Enable COMPILE_TEST for Samsung clocksKrzysztof Kozlowski1-4/+4
Enable the COMPILE_TEST to get build coverage of some of Samsung clock controller drivers. Still some of them will be built only if appropriate SoC is chosen (like SOC_EXYNOS4415 or ARCH_S3C64XX). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-01-30clk: Move vendor's Kconfig into CCF menu sectionJames Liao1-1/+0
Move all vendor's Kconfig into CCF menu section to prevent new drivers putting their Kconfig files in a wrong place. Some Kconfigs need to be modified at the same time to avoid build warnings. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> [sboyd@codeaurora.org: Fix typos in commit message] Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-05-14ARM: S3C24XX: move S3C24XX clock Kconfig options to Samsung clock Kconfig filePankaj Dubey1-0/+23
This patch moves S3C24XX specific clock Kconfig options into "clk/samsung/Kconfig" and also removes COMMON_CLK selection from "mach-s3c24xx/Kconfig" as S3C24XX_COMMON_CLK is selecting it's dependency. CC: Ben Dooks <ben-linux@fluff.org> CC: Kukjin Kim <kgene.kim@samsung.com> CC: Russell King <linux@arm.linux.org.uk> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-05-14clk: samsung: add new Kconfig for Samsung common clock optionPankaj Dubey1-0/+3
This patch adds new Kconfig file for adding new COMMON_CLK_SAMSUNG option. Samsung platforms can select this for using common clock infrastructure. CC: Mike Turquette <mturquette@linaro.org> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-02 03:37:55 +0300