summaryrefslogtreecommitdiff
path: root/drivers/clk/renesas
AgeCommit message (Collapse)AuthorFilesLines
2023-07-19clk: renesas: rzg2l: Fix CPG_SIPLL5_CLK1 register writeBiju Das2-7/+2
[ Upstream commit d1c20885d3b01e6a62e920af4b227abd294d22f3 ] As per the RZ/G2L HW(Rev.1.30 May2023) manual, there are no "write enable" bits in the CPG_SIPLL5_CLK1 register. So fix the CPG_SIPLL5_CLK register write by removing the "write enable" bits. Fixes: 1561380ee72f ("clk: renesas: rzg2l: Add FOUTPOSTDIV clk support") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230518152334.514922-1-biju.das.jz@bp.renesas.com [geert: Remove CPG_SIPLL5_CLK1_*_WEN bit definitions] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*Wolfram Sang5-173/+13
[ Upstream commit b1dec4e78599a2ce5bf8557056cd6dd72e1096b0 ] R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support for this SoC. Public users only have ES2 onwards. In addition to the ES1 specific removals, a check for it was added preventing the machine to boot further. It may otherwise inherit wrong clock settings from ES2 which could damage the hardware. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230202092332.2504-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31clk: renesas: r8a779f0: Fix SCIF parent clocksWolfram Sang1-4/+4
[ Upstream commit 2e0d7d3eabce3babae1fd66d7650e00c848a3b45 ] As serial communication requires a clean clock signal, the Serial Communication Interfaces with FIFO (SCIF) are clocked by a clock that is not affected by Spread Spectrum or Fractional Multiplication. Hence change the parent clocks for the SCIF modules from the S0D12_PER clock to the SASYNCPERD4 clock (which has the same clock rate), cfr. R-Car S4-8 Hardware User's Manual rev. 0.81. Fixes: 24aaff6a6ce4 ("clk: renesas: cpg-mssr: Add support for R-Car S4-8") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20221103143440.46449-3-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31clk: renesas: r8a779f0: Fix HSCIF parent clocksWolfram Sang1-4/+4
[ Upstream commit c258e3ab639112d8f5ae9df9a873750ae2623ce2 ] As serial communication requires a clean clock signal, the High Speed Serial Communication Interfaces with FIFO (HSCIF) are clocked by a clock that is not affected by Spread Spectrum or Fractional Multiplication. Hence change the parent clocks for the HSCIF modules from the S0D3_PER clock to the SASYNCPERD1 clock (which has the same clock rate), cfr. R-Car S4-8 Hardware User's Manual rev. 0.81. Fixes: 080bcd8d5997 ("clk: renesas: r8a779f0: Add HSCIF clocks") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20221103143440.46449-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31clk: renesas: r9a06g032: Repair grave increment errorMarek Vasut1-2/+1
[ Upstream commit 02693e11611e082e3c4d8653e8af028e43d31164 ] If condition (clkspec.np != pd->dev.of_node) is true, then the driver ends up in an endless loop, forever, locking up the machine. Fixes: aad03a66f902 ("clk: renesas: r9a06g032: Add clock domain support") Reviewed-by: Ralph Siemsen <ralph.siemsen@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Gareth Williams <gareth.williams.jx@renesas.com> Link: https://lore.kernel.org/r/20221028113834.7496-1-marex@denx.de Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31clk: renesas: r8a779a0: Fix SD0H clock nameWolfram Sang1-1/+1
[ Upstream commit db7076d5a7f0ca7dcf08f5095c74f86d4d0085ff ] Correct the misspelled textual name of the SD0H clock. Fixes: 470e3f0d0b15 ("clk: renesas: rcar-gen4: Introduce R-Car Gen4 CPG driver") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20221012184830.3199-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31clk: renesas: r8a779f0: Fix SD0H clock nameGeert Uytterhoeven1-1/+1
[ Upstream commit 99c05a2b710f16ea592ccb63ef5fe5f1f6b15db9 ] Correct the misspelled textual name of the SD0H clock. Fixes: 9b5dd1ff705c6854 ("clk: renesas: r8a779f0: Add SDH0 clock") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/1f682d338f133608f138ae87323707436ad8c748.1665558014.git.geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26clk: renesas: r8a779g0: Fix HSCIF parent clocksGeert Uytterhoeven1-4/+4
As serial communication requires a clean clock signal, the High Speed Serial Communication Interfaces with FIFO (HSCIF) is clocked by a clock that is not affected by Spread Spectrum or Fractional Multiplication. Hence change the parent clocks for the HSCIF modules from the S0D3_PER clock to the SASYNCPERD1 clock (which has the same clock rate), cfr. R-Car V4H Hardware User's Manual rev. 0.54. Fixes: 0ab55cf1834177a2 ("clk: renesas: cpg-mssr: Add support for R-Car V4H") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/b7928abc8b9f53d5b06ec8624342f449de3d24ec.1665147497.git.geert+renesas@glider.be
2022-10-18clk: renesas: r8a779g0: Add SASYNCPER clocksGeert Uytterhoeven1-0/+5
On R-Car V4H, all PLLs except PLL5 support Spread Spectrum and/or Fractional Multiplication to reduce electromagnetic interference. Add the SASYNCPER and SASYNCPERD[124] clocks, which are used as clock sources for modules that must not be affected by Spread Spectrum and/or Fractional Multiplication. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/d0f35c35e1f96c5a649ab477e7ba5d8025957cd0.1665147497.git.geert+renesas@glider.be
2022-09-18clk: renesas: r8a779g0: Add EtherAVB clocksGeert Uytterhoeven1-0/+3
Add the module clocks used by the Ethernet AVB (EtherAVB-IF) blocks on the Renesas R-Car V4H (R8A779G0) SoC. Based on a larger patch in the BSP by Kazuya Mizuguchi. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/e9382b0d9acc84acc2357a6921a1459f3a32240e.1662714852.git.geert+renesas@glider.be
2022-09-18clk: renesas: r8a779g0: Add PFC/GPIO clocksGeert Uytterhoeven1-0/+4
Add the module clocks used by the Pin Function Controller (PFC) and General Purpose Input/Output (GPIO) blocks on the Renesas R-Car V4H (R8A779G0) SoC. Extracted from a larger patch in the BSP by Kazuya Mizuguchi. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/cc6a22f0ad49643e17b9921b27aa9cf0a3b8d57a.1662714852.git.geert+renesas@glider.be
2022-09-18clk: renesas: r8a779g0: Add I2C clocksGeert Uytterhoeven1-0/+6
Add the module clocks used by the I2C Bus Interfaces on the Renesas R-Car V4H (R8A779G0) SoC. Extracted from a larger patch in the BSP by Kazuya Mizuguchi. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/f4b94f37950f6e976b68d0b32c324fb026d8b696.1662714852.git.geert+renesas@glider.be
2022-09-18clk: renesas: r8a779g0: Add watchdog clockGeert Uytterhoeven1-0/+1
Add the module clock used by the RCLK Watchdog Timer on the Renesas R-Car V4H (R8A779G0) SoC. Extracted from a larger patch in the BSP by Kazuya Mizuguchi. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/a012e4449b976efbeaabebb983fa6cfc1b9329d3.1662714852.git.geert+renesas@glider.be
2022-08-29clk: renesas: r8a779f0: Add MSIOF clocksWolfram Sang1-0/+4
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220824103515.54931-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-08-29clk: renesas: r9a09g011: Add IIC clock and reset entriesPhil Edworthy1-0/+4
Add IIC groups clock and reset entries to CPG driver. IIC Group A consists of IIC0 and IIC1. IIC Group B consists of IIC2 and IIC3. To confuse things, IIC_PCLK0 is used by group A and IIC_PCLK1 is used by group B. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220819193944.337599-2-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-08-22clk: renesas: r9a07g044: Add conditional compilation for r9a07g044_cpg_infoBiju Das1-0/+2
Add conditional compilation for struct r9a07g044_cpg_info, so the compiler won't allocate any memory for this variable in case CONFIG_CLK_R9A07G044 is disabled. Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220804082605.157269-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-08-22clk: renesas: r8a779f0: Add TMU and parent SASYNC clocksWolfram Sang1-0/+10
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220726210110.1444-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-08-15clk: renesas: r8a779f0: Add CMT clocksWolfram Sang1-0/+4
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220713101447.3804-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-08-15clk: renesas: r8a779f0: Add SDH0 clockWolfram Sang1-1/+2
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220711134656.277730-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05clk: renesas: rcar-gen4: Fix initconst confusion for cpg_pll_configAndi Kleen1-1/+1
A variable pointing to const isn't const itself. It'd have to contain "const" keyword after "*" too. Therefore, cpg_pll_config cannot be put to "rodata". Hence use __initdata instead of __initconst to fix this. Signed-off-by: Andi Kleen <ak@linux.intel.com> [js] more explanatory commit message. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220623083217.26433-2-jslaby@suse.cz Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05clk: renesas: r9a07g043: Add support for RZ/Five SoCLad Prabhakar1-0/+32
Renesas RZ/Five SoC has almost the same clock structure compared to the Renesas RZ/G2UL SoC, re-use the r9a07g043-cpg.c file to add support for RZ/Five SoC. This patch splits up the clocks and reset arrays for RZ/G2UL and RZ/Five SoC using #ifdef CONFIG_ARM64 and #ifdef CONFIG_RISCV checks. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220622181723.13033-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-17clk: renesas: r8a779f0: Add HSCIF clocksWolfram Sang1-0/+4
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220614094937.8104-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-17clk: renesas: r8a779f0: Add PCIe clocksYoshihiro Shimoda1-0/+2
Add the module clocks used by the PCIe controllers on the Renesas R-Car S4-8 (R8A779F0) SoC. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220613115627.2831257-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-17clk: renesas: r8a779f0: Add Z0 and Z1 clock supportGeert Uytterhoeven1-0/+2
Add support for the Z0 and Z1 (Cortex-A55 Sub-System 0 (CPU 0-3) and Sub-System 1 (CPU 4-7)) clocks on R-Car S4-8, based on the existing support for Z clocks on R-Car Gen4. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/43009e25be1223a717e00c392cb2d416f5d47032.1654695893.git.geert+renesas@glider.be
2022-06-13clk: renesas: rza1: Remove struct rz_cpgGeert Uytterhoeven1-18/+15
The register block base pointer as stored in the reg member of the rz_cpg structure is only used during initialization. Hence move it to a local variable, and pass it as a parameter to rz_cpg_register_clock(). After this, the data member is the only remaining member of the rz_cpg structure, so the whole structure can be replaced by the data member. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/2380285576edaa4ad3dc5eca7e0ca418f068c6ef.1654694831.git.geert+renesas@glider.be
2022-06-13clk: renesas: r8a7779: Remove struct r8a7779_cpgGeert Uytterhoeven1-18/+9
All but the data member of the r8a7779_cpg structure are unused, so the whole structure can be replaced by the single member used. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/eb94c0f6c54a4f3a7e0e07f12781333a700c0a05.1654694831.git.geert+renesas@glider.be
2022-06-13clk: renesas: r8a7778: Remove struct r8a7778_cpgGeert Uytterhoeven1-22/+9
All but the data member of the r8a7778_cpg structure are unused, so the whole structure can be replaced by the single member used. Remove the mapping of the CPG registers, as no code uses the mapped registers. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/4123c1c40a901195f00a825d434553d2052829aa.1654694831.git.geert+renesas@glider.be
2022-06-13clk: renesas: sh73a0: Remove sh73a0_cpg.regGeert Uytterhoeven1-13/+13
The register block base pointer as stored in the reg member of the sh73a0_cpg structure is only used during initialization. Hence move it to a local variable, and pass it as a parameter to sh73a0_cpg_register_clock(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/5423e43d0cf518691965412fb510097d23ac5955.1654694831.git.geert+renesas@glider.be
2022-06-13clk: renesas: r8a7740: Remove r8a7740_cpg.regGeert Uytterhoeven1-10/+10
The register block base pointer as stored in the reg member of the r8a7740_cpg structure is only used during initialization. Hence move it to a local variable, and pass it as a parameter to r8a7740_cpg_register_clock(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/7ec676bcc36ef1eda02c2db328c527fc5fd44e99.1654694831.git.geert+renesas@glider.be
2022-06-13clk: renesas: r8a73a4: Remove r8a73a4_cpg.regGeert Uytterhoeven1-11/+11
The register block base pointer as stored in the reg member of the r8a73a4_cpg structure is only used during initialization. Hence move it to a local variable, and pass it as a parameter to r8a73a4_cpg_register_clock(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/f835f3dfcf3bf754065e5002663952cc6341caac.1654694831.git.geert+renesas@glider.be
2022-06-13clk: renesas: r8a779f0: Add SDHI0 clockWolfram Sang1-0/+1
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220603233437.21819-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-13clk: renesas: r8a779f0: Add thermal clockWolfram Sang1-0/+1
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220525151130.24103-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-07clk: renesas: rzg2l: Fix reset status functionBiju Das1-1/+1
As per RZ/G2L HW(Rev.1.10) manual, reset monitor register value 0 means reset signal is not applied (deassert state) and 1 means reset signal is applied (assert state). reset_control_status() expects a positive value if the reset line is asserted. But rzg2l_cpg_status function returns zero for asserted state. This patch fixes the issue by adding double inverted logic, so that reset_control_status returns a positive value if the reset line is asserted. Fixes: ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220531071657.104121-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-06clk: renesas: r9a06g032: Fix UART clkgrp bitselRalph Siemsen1-4/+4
There are two UART clock groups, each having a mux to select its upstream clock source. The register/bit definitions for accessing these two muxes appear to have been reversed since introduction. Correct them so as to match the hardware manual. Fixes: 4c3d88526eba ("clk: renesas: Renesas R9A06G032 clock driver") Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220518182527.1693156-1-ralph.siemsen@linaro.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-06clk: renesas: r9a06g032: Drop some unused fieldsRalph Siemsen1-13/+11
Remove unused fields from struct r9a06g032_clkdesc. As the D_UGATE macro no longer uses _gi, drop it from all declarations. Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220518172808.1691450-2-ralph.siemsen@linaro.org Link: https://lore.kernel.org/r/20220518172808.1691450-3-ralph.siemsen@linaro.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-06clk: renesas: r9a09g011: Add WDT clock and reset entriesPhil Edworthy1-0/+3
Add WDT0 clock and reset entries to CPG driver. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220518150105.48167-1-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-06clk: renesas: r9a09g011: Add PFC clock and reset entriesPhil Edworthy1-0/+2
Add PFC clock/reset entries to CPG driver. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220518135208.39885-1-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-06clk: renesas: r9a07g044: Add POEG clock and reset entriesBiju Das1-1/+13
Add POEG clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220510110653.7326-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-06clk: renesas: r9a07g044: Add GPT clock and reset entryBiju Das1-1/+4
Add GPT clock and reset entry to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220510110653.7326-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-29Merge tag 'dmaengine-5.19-rc1' of ↵Linus Torvalds1-1/+39
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Nothing special, this includes a couple of new device support and new driver support and bunch of driver updates. New support: - Tegra gpcdma driver support - Qualcomm SM8350, Sm8450 and SC7280 device support - Renesas RZN1 dma and platform support Updates: - stm32 device pause/resume support and updates - DMA memset ops Documentation and usage clarification - deprecate '#dma-channels' & '#dma-requests' bindings - driver updates for stm32, ptdma idsx etc" * tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits) dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled dmaengine: sun6i: Add support for the D1 variant dmaengine: sun6i: Add support for 34-bit physical addresses dmaengine: sun6i: Do not use virt_to_phys dt-bindings: dma: sun50i-a64: Add compatible for D1 dmaengine: tegra: Remove unused switch case dmaengine: tegra: Fix uninitialized variable usage dmaengine: stm32-dma: add device_pause/device_resume support dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done() dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor dmaengine: qcom: gpi: Add support for sc7280 dt-bindings: dma: pl330: Add power-domains dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler() dmaengine: stm32-mdma: remove GISR1 register dmaengine: ti: deprecate '#dma-channels' dmaengine: mmp: deprecate '#dma-channels' dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests' ...
2022-05-19clk: renesas: r9a06g032: Probe possible childrenMiquel Raynal1-0/+5
The clock controller device on r9a06g032 takes all the memory range that is described as being a system controller. This range contains many different (unrelated?) registers besides the ones belonging to the clock controller, that can necessitate to be accessed from other peripherals. For instance, the dmamux registers are there. The dmamux "device" will be described as a child node of the clock/system controller node, which means we need the top device driver (the clock controller driver in this case) to populate its children manually. In case of error when populating the children, we do not fail the probe on purpose to keep the clk driver up and running. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220427095653.91804-7-miquel.raynal@bootlin.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19clk: renesas: r9a06g032: Export function to set dmamuxMiquel Raynal1-1/+34
The dmamux register is located within the system controller. Without syscon, we need an extra helper in order to give write access to this register to a dmamux driver. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220427095653.91804-5-miquel.raynal@bootlin.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-06clk: renesas: r9a09g011: Add eth clock and reset entriesPhil Edworthy1-5/+9
Add ethernet clock/reset entries to CPG driver. Note that the AXI and CHI clocks are both enabled and disabled using the same register bit. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220504145454.71287-2-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-06clk: renesas: Add RZ/V2M support using the rzg2l driverPhil Edworthy5-0/+181
The Renesas RZ/V2M SoC is very similar to RZ/G2L, though it doesn't have any CLK_MON registers. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-11-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add support for RZ/V2M reset monitor regPhil Edworthy2-3/+17
The RZ/V2M doesn't have a matching set of reset monitor regs for each reset reg like the RZ/G2L. Instead, it has a single CPG_RST_MON reg which has a single bit per module. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-10-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Make use of CLK_MON registers optionalPhil Edworthy4-1/+16
The RZ/V2M SoC doesn't use CLK_MON registers, so make them optional. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-9-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Set HIWORD mask for all mux and dividersPhil Edworthy3-31/+19
All of the muxes and dividers that can be modified require the HIWORD flags, so make the macros set them. It won't affect read only muxes and dividers. This will make the clock tables a little easier to read, particularly for new SoCs coming. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-8-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add read only versions of the clk macrosPhil Edworthy3-6/+12
This just makes the clk tables easier to read. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-7-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Move the DEF_MUX array size calc into the macroPhil Edworthy3-22/+19
We only ever use ARRAY_SIZE() to populate the number of parents, so move this into the macro to always detect it automatically. This also makes the tables of clocks a little simpler. Similarly for the DEF_SD_MUX macro. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-6-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Fix OSTM1 module clock nameGeert Uytterhoeven1-1/+1
Fix a typo in the name of the "ostm1_pclk" clock. This change has no run-time impact. Fixes: 161450134ae9bab3 ("clk: renesas: r9a07g044: Add OSTM clock and reset entries") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/e0eff1f57378ec29d0d3f1a7bdd7e380583f736b.1651494871.git.geert+renesas@glider.be
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-19 05:41:06 +0300