summaryrefslogtreecommitdiff
path: root/drivers/clk/renesas/rzg2l-cpg.c
AgeCommit message (Collapse)AuthorFilesLines
2024-04-25clk: renesas: rzg2l: Extend power domain supportClaudiu Beznea1-14/+185
RZ/{G2L, V2L, G3S}-based CPG versions have support for saving extra power when clocks are disabled by activating module standby. This is done through MSTOP-specific registers that are part of CPG. Each individual module has one or more bits associated with one MSTOP register (see table "Registers for Module Standby Mode" from HW manuals). Hardware manual associates modules' clocks with one or more MSTOP bits. There are 3 mappings available (identified by researching RZ/G2L, RZ/G3S, RZ/V2L HW manuals): case 1: N clocks mapped to N MSTOP bits (with N={0, ..., X}) case 2: N clocks mapped to 1 MSTOP bit (with N={0, ..., X}) case 3: N clocks mapped to M MSTOP bits (with N={0, ..., X}, M={0, ..., Y}) Case 3 has been currently identified on RZ/V2L for the VCPL4 module. To cover all three cases, the individual platform drivers will provide the clock driver with MSTOP register offsets and associated bits in this register as a bitmask, and the clock driver will apply this bitmask to the proper MSTOP register. The MSTOP support was implemented through power domains. Platform-specific clock drivers will register an array of type struct rzg2l_cpg_pm_domain_init_data, which will be used to instantiate properly the power domains. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20240422105355.1622177-7-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-12-13clk: renesas: rzg2l: Check reset monitor registersClaudiu Beznea1-15/+44
The hardware manual of both RZ/G2L and RZ/G3S specifies that the reset monitor registers need to be interrogated when the reset signals are toggled (chapters "Procedures for Supplying and Stopping Reset Signals" and "Procedure for Activating Modules"). Without this, there is a chance that different modules (e.g. Ethernet) are not ready after their reset signal is toggled, leading to failures (on probe or resume from deep sleep states). The same indications are available for RZ/V2M for TYPE-B reset controls. Fixes: ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC") Fixes: 8090bea32484 ("clk: renesas: rzg2l: Add support for RZ/V2M reset monitor reg") Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231207070700.4156557-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-11-27clk: renesas: rzg2l-cpg: Reuse code in rzg2l_cpg_reset()Claudiu Beznea1-23/+15
Code in rzg2l_cpg_reset() is equivalent with the combined code of rzg2l_cpg_assert() and rzg2l_cpg_deassert(). There is no need to have different versions thus re-use rzg2l_cpg_assert() and rzg2l_cpg_deassert(). Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231120070024.4079344-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-12clk: renesas: rzg2l: Use %x format specifier to print CLK_ON_R()Claudiu Beznea1-1/+1
Use the %x format specifier to print CLK_ON_R(). This makes debugging easier as the value printed will be hexadecimal like in the hardware manual. Along with it add "0x" in front of the printed value. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231010132701.1658737-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-10clk: renesas: Add minimal boot support for RZ/G3S SoCClaudiu Beznea1-0/+6
Add minimal clock and reset support for the RZ/G3S SoC to be able to boot Linux from SD Card/eMMC. This includes necessary core clocks for booting and GIC, SCIF, GPIO, and SD0 module clocks and resets. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231006103959.197485-5-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-10clk: renesas: rzg2l: Add divider clock for RZ/G3SClaudiu Beznea1-0/+186
Add a divider clock driver for RZ/G3S. This will be used on RZ/G3S for the SDHI, SPI, OCTA, I, I2, I3, P0, P1, P2, and P3 core clocks. The divider has some limitation for SDHI, OCTA and SPI clocks: - SDHI div cannot be 1 if parent rate is 800MHz, - OCTA, SPI div cannot be 1 if parent rate is 400MHz. To handle these limitations, a notifier is registered from platform specific clock driver, which makes sure proper actions are taken before the clock rate is changed, when needed. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231006103959.197485-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-10clk: renesas: rzg2l: Refactor SD mux driverClaudiu Beznea1-42/+108
Refactor SD MUX driver to be able to reuse the same code on RZ/G3S. RZ/G2{L,UL} has a limitation with regards to switching the clock source for SD MUX (MUX clock source has to be switched to 266MHz before switching b/w 533MHz and 400MHz). Rework the handling of this limitation to use a clock notifier that is registered according to platform based initialization data, so the SD MUX code can be reused on RZ/G3S. As RZ/G2{L,UL} and RZ/G3S use different bits in different registers to check if the clock switching has been done, this configuration (register offset, register bits and bitfield width) is now passed through struct cpg_core_clk::sconf (status configuration) from platform specific initialization code. Along with struct cpg_core_clk::sconf the mux table indices are also passed from platform specific initialization code. Also, mux flags are now passed to DEF_SD_MUX() as they will be used later by RZ/G3S. CPG_WEN_BIT macro has been introduced to select properly the WEN bit of various registers. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231006103959.197485-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05clk: renesas: rzg2l: Add struct clk_hw_dataClaudiu Beznea1-18/+34
Add clk_hw_data struct that keeps the core part of the clock data. sd_hw_data embeds a member of type struct clk_hw_data along with other members (in the next commits). This commit prepares the field for refactoring the SD MUX clock driver. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929053915.1530607-9-claudiu.beznea@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05clk: renesas: rzg2l: Add support for RZ/G3S PLLClaudiu Beznea1-4/+45
Add support for reading the frequency of PLL1/4/6 as available on RZ/G3S. The computation formula for the PLL frequency is as follows: Fout = (nir + nfr / 4096) * Fin / (mr * pr) Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929053915.1530607-8-claudiu.beznea@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05clk: renesas: rzg2l: Remove critical areaClaudiu Beznea1-4/+1
The spinlock in rzg2l_mod_clock_endisable() is intended to protect RMW-accesses to the hardware register. There is no need to protect instructions that set temporary variables which will be written afterwards to a hardware register. With this only one write to one clock register is executed thus locking/unlocking rmw_lock is removed. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929053915.1530607-7-claudiu.beznea@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05clk: renesas: rzg2l: Fix computation formulaClaudiu Beznea1-6/+6
According to the hardware manual for RZ/G2L (r01uh0914ej0130-rzg2l-rzg2lc.pdf), the computation formula for PLL rate is as follows: Fout = ((m + k/65536) * Fin) / (p * 2^s) and k has values in the range [-32768, 32767]. Dividing k by 65536 with integer arithmetic gives zero all the time, causing slight differences b/w what has been set vs. what is displayed. Thus, get rid of this and decompose the formula before dividing k by 65536. Fixes: ef3c613ccd68a ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC") Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929053915.1530607-6-claudiu.beznea@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05clk: renesas: rzg2l: Trust value returned by hardwareClaudiu Beznea1-7/+1
The onitial value of the CPG_PL2SDHI_DSEL bits 0..1 or 4..6 is 01b. The hardware user's manual (r01uh0914ej0130-rzg2l-rzg2lc.pdf) specifies that setting 0 is prohibited. Hence rzg2l_cpg_sd_clk_mux_get_parent() should just read CPG_PL2SDHI_DSEL, trust the value, and return the proper clock parent index based on the value read. Fixes: eaff33646f4cb ("clk: renesas: rzg2l: Add SDHI clk mux support") Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929053915.1530607-5-claudiu.beznea@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05clk: renesas: rzg2l: Lock around writes to mux registerClaudiu Beznea1-10/+13
The SD MUX output (SD0) is further divided by 4 in G2{L,UL}. The divided clock is SD0_DIV4. SD0_DIV4 is registered with CLK_SET_RATE_PARENT which means a rate request for it is propagated to the MUX and could reach rzg2l_cpg_sd_clk_mux_set_parent() concurrently with the users of SD0. Add proper locking to avoid concurrent accesses on SD MUX set rate registers. Fixes: eaff33646f4cb ("clk: renesas: rzg2l: Add SDHI clk mux support") Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929053915.1530607-4-claudiu.beznea@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05clk: renesas: rzg2l: Wait for status bit of SD mux before continuingClaudiu Beznea1-7/+10
The hardware user manual for RZ/G2L (r01uh0914ej0130-rzg2l-rzg2lc.pdf, chapter 7.4.7 Procedure for Switching Clocks by the Dynamic Switching Frequency Selectors) specifies that we need to check CPG_PL2SDHI_DSEL for SD clock switching status. Fixes: eaff33646f4cb ("clk: renesas: rzg2l: Add SDHI clk mux support") Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929053915.1530607-3-claudiu.beznea@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-09-18clk: renesas: rzg2l: Use FIELD_GET() for PLL register fieldsClaudiu Beznea1-5/+5
Use FIELD_GET() for PLL register fields. This is its purpose. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230912045157.177966-14-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-09-18clk: renesas: rzg2l: Simplify the logic in rzg2l_mod_clock_endisable()Claudiu Beznea1-3/+2
The bitmask << 16 is anyway set on both branches of if thus move it before the if and set the lower bits of registers only in case clock is enabled. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230912045157.177966-12-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-09-18clk: renesas: rzg2l: Use core->name for clock nameClaudiu Beznea1-1/+1
core->name already contains the clock name thus, there is no need to check the GET_SHIFT(core->conf) to decide on it. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230912045157.177966-11-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-08-31Merge branches 'clk-bindings', 'clk-starfive', 'clk-rm', 'clk-renesas' and ↵Stephen Boyd1-9/+2
'clk-cleanup' into clk-next - Remove OXNAS clk driver * clk-bindings: dt-bindings: clock: versal: Convert the xlnx,zynqmp-clk.txt to yaml dt-bindings: clock: xlnx,versal-clk: drop select:false dt-bindings: clock: versal: Add versal-net compatible string dt-bindings: clock: ast2600: Add I3C and MAC reset definitions dt-bindings: arm: hisilicon,cpuctrl: Merge "hisilicon,hix5hd2-clock" into parent binding * clk-starfive: reset: starfive: jh7110: Add StarFive STG/ISP/VOUT resets support clk: starfive: Simplify .determine_rate() clk: starfive: Add StarFive JH7110 Video-Output clock driver clk: starfive: Add StarFive JH7110 Image-Signal-Process clock driver clk: starfive: Add StarFive JH7110 System-Top-Group clock driver clk: starfive: jh7110-sys: Add PLL clocks source from DTS clk: starfive: Add StarFive JH7110 PLL clock driver dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator dt-bindings: clock: Add StarFive JH7110 Image-Signal-Process clock and reset generator dt-bindings: clock: Add StarFive JH7110 System-Top-Group clock and reset generator dt-bindings: clock: jh7110-syscrg: Add PLL clock inputs dt-bindings: soc: starfive: Add StarFive syscon module dt-bindings: clock: Add StarFive JH7110 PLL clock generator * clk-rm: dt-bindings: clk: oxnas: remove obsolete bindings clk: oxnas: remove obsolete clock driver * clk-renesas: clk: renesas: rcar-gen3: Add ADG clocks clk: renesas: r8a77965: Add 3DGE and ZG support clk: renesas: r8a7796: Add 3DGE and ZG support clk: renesas: r8a7795: Add 3DGE and ZG support clk: renesas: emev2: Remove obsolete clkdev registration clk: renesas: r9a07g043: Add MTU3a clock and reset entry clk: renesas: rzg2l: Simplify .determine_rate() clk: renesas: r9a09g011: Add CSI related clocks clk: renesas: r8a774b1: Add 3DGE and ZG support clk: renesas: r8a774e1: Add 3DGE and ZG support clk: renesas: r8a774a1: Add 3DGE and ZG support clk: renesas: rcar-gen3: Add support for ZG clock * clk-cleanup: clk: mvebu: Convert to devm_platform_ioremap_resource() clk: nuvoton: Convert to devm_platform_ioremap_resource() clk: socfpga: agilex: Convert to devm_platform_ioremap_resource() clk: ti: Use devm_platform_get_and_ioremap_resource() clk: mediatek: Convert to devm_platform_ioremap_resource() clk: hsdk-pll: Convert to devm_platform_ioremap_resource() clk: gemini: Convert to devm_platform_ioremap_resource() clk: fsl-sai: Convert to devm_platform_ioremap_resource() clk: bm1880: Convert to devm_platform_ioremap_resource() clk: axm5516: Convert to devm_platform_ioremap_resource() clk: actions: Convert to devm_platform_ioremap_resource() clk: cdce925: Remove redundant of_match_ptr() drivers: clk: keystone: Fix parameter judgment in _of_pll_clk_init() clk: Explicitly include correct DT includes
2023-07-19clk: Explicitly include correct DT includesRob Herring1-2/+1
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Dinh Nguyen <dinguyen@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # samsung Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5 Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230718143156.1066339-1-robh@kernel.org Acked-by: Abel Vesa <abel.vesa@linaro.org> #imx Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-07-11clk: renesas: rzg2l: Simplify .determine_rate()Christophe JAILLET1-7/+1
rzg2l_cpg_sd_clk_mux_determine_rate() is the same as __clk_mux_determine_rate_closest(), so use the latter to save some LoC. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/fed02e0325275df84e2d76f8c481e40e7023cbd9.1688760372.git.christophe.jaillet@wanadoo.fr Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-06-05clk: renesas: rzg2l: Convert to readl_poll_timeout_atomic()Geert Uytterhoeven1-11/+5
Use readl_poll_timeout_atomic() instead of open-coding the same operation. As typically no retries are needed, 10 µs is a suitable timeout value. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/900543d4b9abc1004e6aecdb676f23e5508ae96f.1685692810.git.geert+renesas@glider.be
2023-05-23clk: renesas: rzg2l: Fix CPG_SIPLL5_CLK1 register writeBiju Das1-4/+2
As per the RZ/G2L HW(Rev.1.30 May2023) manual, there are no "write enable" bits in the CPG_SIPLL5_CLK1 register. So fix the CPG_SIPLL5_CLK register write by removing the "write enable" bits. Fixes: 1561380ee72f ("clk: renesas: rzg2l: Add FOUTPOSTDIV clk support") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230518152334.514922-1-biju.das.jz@bp.renesas.com [geert: Remove CPG_SIPLL5_CLK1_*_WEN bit definitions] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-04-13clk: renesas: remove MODULE_LICENSE in non-modulesNick Alcock1-1/+0
Since commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: linux-renesas-soc@vger.kernel.org Cc: linux-clk@vger.kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-10-28clk: renesas: rzg2l: Don't assume all CPG_MOD clocks support PMLad Prabhakar1-15/+24
There are cases where not all CPG_MOD clocks should be assumed to support PM. For example on the CRU block there is a particular sequence that needs to be followed to initialize the CSI-2 D-PHY in which individual clocks need to be turned ON/OFF, due to which Runtime PM support wasn't used by the CRU CSI-2 driver. This patch adds support to allow indicating if PM is not supported by the CPG_MOD clocks. Two new members no_pm_mod_clks and num_no_pm_mod_clks are added to struct rzg2l_cpg_info so that MOD clocks which do not support PM can be passed by no_pm_mod_clks[] array and when the driver uses Runtime PM support the clk ID is matched against the no_pm_mod_clks[] array to see if the clk is needed to be included as part of Runtime PM. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20221026014227.162121-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-10-26clk: renesas: rzg2l: Fix typo in struct rzg2l_cpg_priv kerneldocLad Prabhakar1-1/+1
Fix typo pll5_mux_dsi_div_params -> mux_dsi_div_params Fixes the below warning (make W=1): drivers/clk/renesas/rzg2l-cpg.c:115: warning: Function parameter or member 'mux_dsi_div_params' not described in 'rzg2l_cpg_priv' Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20221026012123.159790-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-10-17clk: renesas: rzg2l: Fix typo in function nameLad Prabhakar1-3/+3
Fix typo, rzg2l_mod_clock__get_sibling -> rzg2l_mod_clock_get_sibling Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220921080051.5604-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-10-17clk: renesas: rzg2l: Support sd clk mux round operationBiju Das1-1/+1
Currently, determine_rate() is not doing any round operation and due to this it always selects a lower clock source compared to the closest higher one. Support sd clk mux round operation by passing CLK_MUX_ROUND_CLOSEST flag to clk_mux_determine_rate_flags(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220919084110.3065156-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-07clk: renesas: rzg2l: Fix reset status functionBiju Das1-1/+1
As per RZ/G2L HW(Rev.1.10) manual, reset monitor register value 0 means reset signal is not applied (deassert state) and 1 means reset signal is applied (assert state). reset_control_status() expects a positive value if the reset line is asserted. But rzg2l_cpg_status function returns zero for asserted state. This patch fixes the issue by adding double inverted logic, so that reset_control_status returns a positive value if the reset line is asserted. Fixes: ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220531071657.104121-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-06clk: renesas: Add RZ/V2M support using the rzg2l driverPhil Edworthy1-0/+6
The Renesas RZ/V2M SoC is very similar to RZ/G2L, though it doesn't have any CLK_MON registers. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-11-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add support for RZ/V2M reset monitor regPhil Edworthy1-1/+9
The RZ/V2M doesn't have a matching set of reset monitor regs for each reset reg like the RZ/G2L. Instead, it has a single CPG_RST_MON reg which has a single bit per module. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-10-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Make use of CLK_MON registers optionalPhil Edworthy1-1/+7
The RZ/V2M SoC doesn't use CLK_MON registers, so make them optional. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-9-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add DSI divider clk supportBiju Das1-0/+125
M3 clock is sourced from DSI Divider (DSIDIVA * DSIDIVB) This patch add support for DSI divider clk by combining DSIDIVA and DSIDIVB. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add PLL5_4 clk mux supportBiju Das1-0/+93
Add PLL5_4 clk mux support to select clock from clock sources FOUTPOSTDIV and FOUT1PH0. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add FOUTPOSTDIV clk supportBiju Das1-0/+212
PLL5 generates FOUTPOSTDIV clk and is sourced by LCDC/DSI modules. The FOUTPOSTDIV is connected to PLL5_4 MUX. Video clock is sourced from DSI divider which is connected to PLL5_4 MUX. This patch adds support for generating FOUTPOSTDIV clk. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13clk: renesas: Add support for RZ/G2UL SoCBiju Das1-0/+6
The clock structure for RZ/G2UL is almost identical to RZ/G2L SoC with fewer IP blocks. The IP blocks such as WDT1, GPT, H264, GPU and POEG are not present on RZ/G2UL. This patch adds minimal clock and reset entries required to boot the system on Renesas RZ/G2UL SMARC EVK and binds it with the RZ/G2L CPG core driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220412161314.13800-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13clk: renesas: rzg2l: Simplify multiplication/shift logicGeert Uytterhoeven1-1/+1
"a * (1 << b)" == "a << b". No change in generated code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/71e1cf2e30fb2d7966fc8ec6bab23eb7e24aa1c4.1645460687.git.geert+renesas@glider.be
2022-04-04clk: renesas: rzg2l: Remove unused notifiersPhil Edworthy1-2/+0
notifiers is not used. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220304143241.8523-1-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-02-10clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoCBiju Das1-0/+6
The clock structure for RZ/V2L is almost identical to the RZ/G2L SoC. The only difference being that RZ/V2L has additional registers to control clocks and resets for the DRP-AI block. Reuse r9a07g044-cpg.c, as the clock IDs and reset IDs are the same between RZ/G2L and RZ/V2L, and add a separate r9a07g054_cpg_info to take care of the DRP-AI clocks/resets. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220205084006.7142-1-biju.das.jz@bp.renesas.com Link: https://lore.kernel.org/r/20220209203411.22332-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: rzg2l: propagate return value of_genpd_add_provider_simple()Lad Prabhakar1-2/+1
of_genpd_add_provider_simple() might fail, this patch makes sure we check the return value of of_genpd_add_provider_simple() by propagating the return value to the caller of rzg2l_cpg_add_clk_domain(). Fixes: ef3c613ccd68a ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211117115101.28281-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: rzg2l: Check return value of pm_genpd_init()Lad Prabhakar1-1/+13
Make sure we check the return value of pm_genpd_init() which might fail. Also add a devres action to remove the power-domain in-case the probe callback fails further down in the code flow. Fixes: ef3c613ccd68a ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211117115101.28281-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-15clk: renesas: rzg2l: Add missing kerneldoc for resetsGeert Uytterhoeven1-0/+1
make W=1: drivers/clk/renesas/rzg2l-cpg.c:95: warning: Function parameter or member 'num_resets' not described in 'rzg2l_cpg_priv' Add the missing kerneldoc for fields in struct rzg2l_cpg_priv and struct rzg2l_cpg_info related to Module Resets. Fixes: c3e67ad6f5a2c698 ("dt-bindings: clock: r9a07g044-cpg: Update clock/reset definitions") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/39c2c5fd4232b6620a4a56dba4e2b0d61476ee36.1634646869.git.geert+renesas@glider.be
2021-10-08clk: renesas: rzg2l: Add SDHI clk mux supportBiju Das1-0/+118
Add SDHI clk mux support to select SDHI clock from different clock sources. As per HW manual, direct clock switching from 533MHz to 400MHz and vice versa is not recommended. So added support for handling this in mux. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211007111434.8665-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-24clk: renesas: rzg2l: Add support to handle coupled clocksBiju Das1-0/+71
The AXI and CHI clocks use the same register bit for controlling clock output. Add a new clock type for coupled clocks, which sets the CPG_CLKON_ETH.CLK[01]_ON bit when at least one clock is enabled, and clears the bit only when both clocks are disabled. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210922155145.28156-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-24clk: renesas: rzg2l: Add support to handle MUX clocksBiju Das1-0/+23
Add support to handle mux clocks in order to select a clock source from multiple sources. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210922155145.28156-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-24clk: renesas: rzg2l: Fix clk status functionBiju Das1-1/+1
As per RZ/G2L HW(Rev.0.50) manual, clock monitor register value 0 means clock is not supplied and 1 means clock is supplied. This patch fixes the issue by removing the inverted logic. Fixing the above, triggered following 2 issues 1) GIC interrupts don't work if we disable IA55_CLK and DMAC_ACLK. Fixed this issue by adding these clocks as critical clocks. 2) DMA is not working, since the DMA driver is not turning on DMAC_PCLK. So will provide a fix in the DMA driver to turn on DMA_PCLK. Fixes: ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210922112405.26413-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-19clk: renesas: Rename renesas-rzg2l-cpg.[ch] to rzg2l-cpg.[ch]Geert Uytterhoeven1-0/+750
Rename renesas-rzg2l-cpg.c and renesas-rzg2l-cpg.h to rzg2l-cpg.c resp. rzg2l-cpg.h, for consistency with other (sub)drivers. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/edc442daaedffcf10e835ff479d906fcae0e59db.1626268821.git.geert+renesas@glider.be
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-26 16:34:04 +0300