summaryrefslogtreecommitdiff
path: root/drivers/clk/qcom
AgeCommit message (Collapse)AuthorFilesLines
2023-03-11clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSCDmitry Baryshkov1-6/+1
[ Upstream commit cb81719e3c1165ef1bc33137dc628f750eed8ea4 ] The gdsc_init() function will rewrite the CLK_DIS_WAIT field while registering the GDSC (writing the value 0x2 by default). This will override the setting done in the driver's probe function. Set cx_gdsc.clk_dis_wait_val to 8 to follow the intention of the probe function. Fixes: 453361cdd757 ("clk: qcom: Add graphics clock controller driver for SDM845") Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230201172305.993146-2-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11clk: qcom: gcc-qcs404: fix names of the DSI clocks used as parentsDmitry Baryshkov1-4/+4
[ Upstream commit 47d94d30cd3dcc743241b4208b1eec7247610c84 ] The QCS404 uses 28nm LPM DSI PHY, which registers dsi0pll and dsi0pllbyte clocks. Fix all DSI PHY clock names used as parents inside the GCC driver. Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404") Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221226042154.2666748-7-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11clk: qcom: gcc-qcs404: disable gpll[04]_out_aux parentsDmitry Baryshkov1-16/+0
[ Upstream commit 712c64caf31374de57aa193a9dff57172b2f6f82 ] On the QCS404 platform the driver for the Global Clock Controller doens't define gpll0_out_aux and gpll4_out_aux clocks, so it's not possible to use them as parents. Remove entries for these clocks. Note: backporting this patch to earlier kernels would also require a previous patch which switches the gcc driver to use ARRAY_SIZE for parent data arrays. Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221226042154.2666748-6-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18clk: qcom: clk-krait: fix wrong div2 functionsChristian Marangi1-0/+2
[ Upstream commit d676d3a3717cf726d3affedbe5ba98fc4ccad7b3 ] Currently div2 value is applied to the wrong bits. This is caused by a bug in the code where the shift is done only for lpl, for anything else the mask is not shifted to the correct bits. Fix this by correctly shift if lpl is not supported. Fixes: 4d7dc77babfe ("clk: qcom: Add support for Krait clocks") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221108215625.30186-1-ansuelsmth@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25clk: qcom: ipq8074: dont disable gcc_sleep_clk_srcRobert Marko1-0/+1
[ Upstream commit 1bf7305e79aab095196131bdc87a97796e0e3fac ] Once the usb sleep clocks are disabled, clock framework is trying to disable the sleep clock source also. However, it seems that it cannot be disabled and trying to do so produces: [ 245.436390] ------------[ cut here ]------------ [ 245.441233] gcc_sleep_clk_src status stuck at 'on' [ 245.441254] WARNING: CPU: 2 PID: 223 at clk_branch_wait+0x130/0x140 [ 245.450435] Modules linked in: xhci_plat_hcd xhci_hcd dwc3 dwc3_qcom leds_gpio [ 245.456601] CPU: 2 PID: 223 Comm: sh Not tainted 5.18.0-rc4 #215 [ 245.463889] Hardware name: Xiaomi AX9000 (DT) [ 245.470050] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 245.474307] pc : clk_branch_wait+0x130/0x140 [ 245.481073] lr : clk_branch_wait+0x130/0x140 [ 245.485588] sp : ffffffc009f2bad0 [ 245.489838] x29: ffffffc009f2bad0 x28: ffffff8003e6c800 x27: 0000000000000000 [ 245.493057] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800226ef20 [ 245.500175] x23: ffffffc0089ff550 x22: 0000000000000000 x21: ffffffc008476ad0 [ 245.507294] x20: 0000000000000000 x19: ffffffc00965ac70 x18: fffffffffffc51a7 [ 245.514413] x17: 68702e3030303837 x16: 3a6d726f6674616c x15: ffffffc089f2b777 [ 245.521531] x14: ffffffc0095c9d18 x13: 0000000000000129 x12: 0000000000000129 [ 245.528649] x11: 00000000ffffffea x10: ffffffc009621d18 x9 : 0000000000000001 [ 245.535767] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001 [ 245.542885] x5 : ffffff803fdca6d8 x4 : 0000000000000000 x3 : 0000000000000027 [ 245.550002] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000026 [ 245.557122] Call trace: [ 245.564229] clk_branch_wait+0x130/0x140 [ 245.566490] clk_branch2_disable+0x2c/0x40 [ 245.570656] clk_core_disable+0x60/0xb0 [ 245.574561] clk_core_disable+0x68/0xb0 [ 245.578293] clk_disable+0x30/0x50 [ 245.582113] dwc3_qcom_remove+0x60/0xc0 [dwc3_qcom] [ 245.585588] platform_remove+0x28/0x60 [ 245.590361] device_remove+0x4c/0x80 [ 245.594179] device_release_driver_internal+0x1dc/0x230 [ 245.597914] device_driver_detach+0x18/0x30 [ 245.602861] unbind_store+0xec/0x110 [ 245.607027] drv_attr_store+0x24/0x40 [ 245.610847] sysfs_kf_write+0x44/0x60 [ 245.614405] kernfs_fop_write_iter+0x128/0x1c0 [ 245.618052] new_sync_write+0xc0/0x130 [ 245.622391] vfs_write+0x1d4/0x2a0 [ 245.626123] ksys_write+0x58/0xe0 [ 245.629508] __arm64_sys_write+0x1c/0x30 [ 245.632895] invoke_syscall.constprop.0+0x5c/0x110 [ 245.636890] do_el0_svc+0xa0/0x150 [ 245.641488] el0_svc+0x18/0x60 [ 245.644872] el0t_64_sync_handler+0xa4/0x130 [ 245.647914] el0t_64_sync+0x174/0x178 [ 245.652340] ---[ end trace 0000000000000000 ]--- So, add CLK_IS_CRITICAL flag to the clock so that the kernel won't try to disable the sleep clock. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220515210048.483898-10-robimarko@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25clk: qcom: camcc-sdm845: Fix topology around titan_top power domainVladimir Zapolskiy1-0/+4
[ Upstream commit 103dd2338bbff567bce7acd00fc5a09c806b38ec ] On SDM845 two found VFE GDSC power domains shall not be operated, if titan top is turned off, thus the former power domains will be set as subdomains by a GDSC registration routine. Fixes: 78412c262004 ("clk: qcom: Add camera clock controller driver for SDM845") Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220519214133.1728979-2-vladimir.zapolskiy@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25clk: qcom: ipq8074: set BRANCH_HALT_DELAY flag for UBI clocksRobert Marko1-0/+10
[ Upstream commit 2bd357e698207e2e65db03007e4be65bf9d6a7b3 ] Currently, attempting to enable the UBI clocks will cause the stuck at off warning to be printed and clk_enable will fail. [ 14.936694] gcc_ubi1_ahb_clk status stuck at 'off' Downstream 5.4 QCA kernel has fixed this by seting the BRANCH_HALT_DELAY flag on UBI clocks, so lets do the same. Fixes: 5736294aef83 ("clk: qcom: ipq8074: add NSS clocks") Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220515210048.483898-6-robimarko@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25clk: qcom: ipq8074: fix NSS port frequency tablesRobert Marko1-0/+8
[ Upstream commit 0e9e61a2815b5cd34f1b495b2d72e8127ce9b794 ] NSS port 5 and 6 frequency tables are currently broken and are causing a wide ranges of issue like 1G not working at all on port 6 or port 5 being clocked with 312 instead of 125 MHz as UNIPHY1 gets selected. So, update the frequency tables with the ones from the downstream QCA 5.4 based kernel which has already fixed this. Fixes: 7117a51ed303 ("clk: qcom: ipq8074: add NSS ethernet port clocks") Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220515210048.483898-3-robimarko@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25clk: qcom: clk-krait: unlock spin after mux completionAnsuel Smith1-1/+6
[ Upstream commit df83d2c9e72910416f650ade1e07cc314ff02731 ] Unlock spinlock after the mux switch is completed to prevent any corner case of mux request while the switch still needs to be done. Fixes: 4d7dc77babfe ("clk: qcom: Add support for Krait clocks") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430054458.31321-3-ansuelsmth@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15clk: qcom: gcc-msm8994: Fix gpll4 widthKonrad Dybcio1-0/+1
[ Upstream commit 71021db1c532c2545ae53b9ee85b37b7154f51d4 ] The gpll4 postdiv is actually a div4, so make sure that Linux is aware of this. This fixes the following error messages: mmc1: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz mmc1: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz Fixes: aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller") Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20220319174940.341137-1-konrad.dybcio@somainline.org Tested-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15clk: qcom: clk-rcg2: Update the frac table for pixel clockTaniya Das1-0/+1
[ Upstream commit b527358cb4cd58a8279c9062b0786f1fab628fdc ] Support the new numerator and denominator for pixel clock on SM8350 and support rgb101010, RGB888 use cases on SM8450. Fixes: 99cbd064b059f ("clk: qcom: Support display RCG clocks") Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220227175536.3131-2-tdas@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15clk: qcom: clk-rcg2: Update logic to calculate D value for RCGTaniya Das1-2/+11
[ Upstream commit 58922910add18583d5273c2edcdb9fd7bf4eca02 ] The display pixel clock has a requirement on certain newer platforms to support M/N as (2/3) and the final D value calculated results in underflow errors. As the current implementation does not check for D value is within the accepted range for a given M & N value. Update the logic to calculate the final D value based on the range. Fixes: 99cbd064b059f ("clk: qcom: Support display RCG clocks") Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220227175536.3131-1-tdas@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15clk: qcom: ipq8074: Use floor ops for SDCC1 clockDirk Buchwalder1-1/+1
[ Upstream commit b77d8306d84f83d1da68028a68c91da9c867b6f6 ] Use floor ops on SDCC1 APPS clock in order to round down selected clock frequency and avoid overclocking SD/eMMC cards. For example, currently HS200 cards were failling tuning as they were actually being clocked at 384MHz instead of 192MHz. This caused some boards to disable 1.8V I/O and force the eMMC into the standard HS mode (50MHz) and that appeared to work despite the eMMC being overclocked to 96Mhz in that case. There was a previous commit to use floor ops on SDCC clocks, but it looks to have only covered SDCC2 clock. Fixes: 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks") Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de> Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220210173100.505128-1-robimarko@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16clk: qcom: gdsc: Add support to update GDSC transition delayTaniya Das2-6/+28
[ Upstream commit 4e7c4d3652f96f41179aab3ff53025c7a550d689 ] GDSCs have multiple transition delays which are used for the GDSC FSM states. Older targets/designs required these values to be updated from gdsc code to certain default values for the FSM state to work as expected. But on the newer targets/designs the values updated from the GDSC driver can hamper the FSM state to not work as expected. On SC7180 we observe black screens because the gdsc is being enabled/disabled very rapidly and the GDSC FSM state does not work as expected. This is due to the fact that the GDSC reset value is being updated from SW. Thus add support to update the transition delay from the clock controller gdscs as required. Fixes: 45dd0e55317cc ("clk: qcom: Add support for GDSCs) Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/20220223185606.3941-1-tdas@codeaurora.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-14clk: qcom: regmap-mux: fix parent clock lookupDmitry Baryshkov3-1/+15
commit 9a61f813fcc8d56d85fcf9ca6119cf2b5ac91dd5 upstream. The function mux_get_parent() uses qcom_find_src_index() to find the parent clock index, which is incorrect: qcom_find_src_index() uses src enum for the lookup, while mux_get_parent() should use cfg field (which corresponds to the register value). Add qcom_find_cfg_index() function doing this kind of lookup and use it for mux parent lookup. Fixes: df964016490b ("clk: qcom: add parent map for regmap mux") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211115233407.1046179-1-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clkDmitry Baryshkov1-15/+0
[ Upstream commit 05cf3ec00d460b50088d421fb878a0f83f57e262 ] The gcc_aggre1_pnoc_ahb_clk is crucial for the proper MSM8996/APQ8096 functioning. If it gets disabled, several subsytems will stop working (including eMMC/SDCC and USB). There are no in-kernel users of this clock, so it is much simpler to remove from the kernel. The clock was first removed in the commit 9e60de1cf270 ("clk: qcom: Remove gcc_aggre1_pnoc_ahb_clk from msm8996") by Stephen Boyd, but got added back in the commit b567752144e3 ("clk: qcom: Add some missing gcc clks for msm8996") by Rajendra Nayak. Let's remove it again in hope that nobody adds it back. Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Cc: Rajendra Nayak <rnayak@codeaurora.org> Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Fixes: b567752144e3 ("clk: qcom: Add some missing gcc clks for msm8996") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211104011155.2209654-1-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLEChen Hui1-0/+1
[ Upstream commit 790b516ada10a4dcc0f0a56dc0ced475d86d5820 ] CONFIG_QCOM_A53PLL is tristate option and therefore this driver can be compiled as a module. This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Fixes: 0c6ab1b8f894 ("clk: qcom: Add A53 PLL support") Signed-off-by: Chen Hui <clare.chenhui@huawei.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210409082352.233810-3-clare.chenhui@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04clk: qcom: gcc-msm8998: Fix Alpha PLL type for all GPLLsAngeloGioacchino Del Regno1-50/+50
[ Upstream commit 292f75ecff07e8a07fe2e3e19b4b567d0b698842 ] All of the GPLLs in the MSM8998 Global Clock Controller are Fabia PLLs and not generic alphas: this was producing bad effects over the entire clock tree of MSM8998, where any GPLL child clock was declaring a false clock rate, due to their parent also showing the same. The issue resides in the calculation of the clock rate for the specific Alpha PLL type, where Fabia has a different register layout; switching the MSM8998 GPLLs to the correct Alpha Fabia PLL type fixes the rate (calculation) reading. While at it, also make these PLLs fixed since their rate is supposed to *never* be changed while the system runs, as this would surely crash the entire SoC. Now all the children of all the PLLs are also complying with their specified clock table and system stability is improved. Fixes: b5f5f525c547 ("clk: qcom: Add MSM8998 Global Clock Control (GCC) driver") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210114221059.483390-7-angelogioacchino.delregno@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29clk: qcom: gcc-sdm660: Fix wrong parent_mapKonrad Dybcio1-1/+1
[ Upstream commit d46e5a39f9be9288f1ce2170c4c7f8098f4e7f68 ] This was likely overlooked while porting the driver upstream. Reported-by: Pavel Dubrova <pashadubrova@gmail.com> Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200922120909.97203-1-konradybcio@gmail.com Fixes: f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clkKonrad Dybcio1-0/+3
[ Upstream commit 3386af51d3bcebcba3f7becdb1ef2e384abe90cf ] Add missing halt_check, hwcg_reg and hwcg_bit properties. These were likely omitted when porting the driver upstream. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200726111215.22361-9-konradybcio@gmail.com Fixes: f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VALJonathan Marek1-2/+0
[ Upstream commit c8b9002f44e4a1d2771b2f59f6de900864b1f9d7 ] 0x44 isn't a register offset, it is the value that goes into CAL_L_VAL. Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-3-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21clk: qcom: gcc: fix sm8150 GPU and NPU clocksJonathan Marek1-2/+6
[ Upstream commit 667f39b59b494d96ae70f4217637db2ebbee3df0 ] Fix the parents and set BRANCH_HALT_SKIP. From the downstream driver it should be a 500us delay and not skip, however this matches what was done for other clocks that had 500us delay in downstream. Fixes: f73a4230d5bb ("clk: qcom: gcc: Add GPU and NPU clocks for SM8150") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-2-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19clk: qcom: clk-rpmh: Wait for completion when enabling clocksMike Tipton1-2/+13
[ Upstream commit dad4e7fda4bdc1a6357db500a7bab8843c08e521 ] The current implementation always uses rpmh_write_async, which doesn't wait for completion. That's fine for disable requests since there's no immediate need for the clocks and they can be disabled in the background. However, for enable requests we need to ensure the clocks are actually enabled before returning to the client. Otherwise, clients can end up accessing their HW before the necessary clocks are enabled, which can lead to bus errors. Use the synchronous version of this API (rpmh_write) for enable requests in the active set to ensure completion. Completion isn't required for sleep/wake sets, since they don't take effect until after we enter sleep. All rpmh requests are automatically flushed prior to entering sleep. Fixes: 9c7e47025a6b ("clk: qcom: clk-rpmh: Add QCOM RPMh clock driver") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lkml.kernel.org/r/20200215021232.1149-1-mdtipton@codeaurora.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> [sboyd@kernel.org: Reorg code a bit for readability, rename to 'wait' to make local variable not conflict with completion.h mechanism] Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22clk: qcom: gcc: Add missing UFS clocks for SM8150Vinod Koul1-0/+84
commit 37c72e4cae37f0dace1abb3711ede7fbc6d0862a upstream. Add the missing ufs card and ufs phy clocks for SM8150. They were missed in earlier addition of clock driver. Fixes: 2a1d7eb854bb ("clk: qcom: gcc: Add global clock controller driver for SM8150") Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lkml.kernel.org/r/20200513065420.32735-2-vkoul@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22clk: qcom: gcc: Add GPU and NPU clocks for SM8150Vinod Koul1-0/+64
commit f73a4230d5bbc8fc7e1a2479ac997f786111c7bb upstream. Add the GPU and NPU clocks for SM8150. They were missed in earlier addition of clock driver. Fixes: 2a1d7eb854bb ("clk: qcom: gcc: Add global clock controller driver for SM8150") Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lkml.kernel.org/r/20200513065420.32735-1-vkoul@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24clk: qcom: msm8916: Fix the address location of pll->config_regBryan O'Donoghue1-4/+4
[ Upstream commit f47ab3c2f5338828a67e89d5f688d2cef9605245 ] During the process of debugging a processor derived from the msm8916 which we found the new processor was not starting one of its PLLs. After tracing the addresses and writes that downstream was doing and comparing to upstream it became obvious that we were writing to a different register location than downstream when trying to configure the PLL. This error is also present in upstream msm8916. As an example clk-pll.c::clk_pll_recalc_rate wants to write to pll->config_reg updating the bit-field POST_DIV_RATIO. That bit-field is defined in PLL_USER_CTL not in PLL_CONFIG_CTL. Taking the BIMC PLL as an example lm80-p0436-13_c_qc_snapdragon_410_processor_hrd.pdf 0x01823010 GCC_BIMC_PLL_USER_CTL 0x01823014 GCC_BIMC_PLL_CONFIG_CTL This pattern is repeated for gpll0, gpll1, gpll2 and bimc_pll. This error is likely not apparent since the bootloader will already have initialized these PLLs. This patch corrects the location of config_reg from PLL_CONFIG_CTL to PLL_USER_CTL for all relevant PLLs on msm8916. Fixes commit 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support") Cc: Georgi Djakov <georgi.djakov@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lkml.kernel.org/r/20200329124116.4185447-1-bryan.odonoghue@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03clk: qcom: gcc: Fix parent for gpll0_out_evenVinod Koul1-2/+1
[ Upstream commit a76f274182f054481182c81cd62bb8794a5450a6 ] Documentation says that gpll0 is parent of gpll0_out_even, somehow driver coded that as bi_tcxo, so fix it Fixes: 2a1d7eb854bb ("clk: qcom: gcc: Add global clock controller driver for SM8150") Reported-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lkml.kernel.org/r/20200521052728.2141377-1-vkoul@kernel.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24clk: qcom: smd: Add missing bimc clockJeffrey Hugo1-0/+3
[ Upstream commit 87ec9adcca71801a44ddb311185b17df09839ab5 ] It turns out booting the modem is dependent on a bimc vote from Linux on msm8998. To make the modem happy, add the bimc clock to rely on the default vote from rpmcc. Once we have interconnect support, bimc should be controlled properly. Fixes: 6131dc81211c ("clk: qcom: smd: Add support for MSM8998 rpm clocks") Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20191217165409.4919-1-jeffrey.l.hugo@gmail.com Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24clk: qcom: rcg2: Don't crash if our parent can't be found; return an errorDouglas Anderson1-0/+3
[ Upstream commit 908b050114d8fefdddc57ec9fbc213c3690e7f5f ] When I got my clock parenting slightly wrong I ended up with a crash that looked like this: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... pc : clk_hw_get_rate+0x14/0x44 ... Call trace: clk_hw_get_rate+0x14/0x44 _freq_tbl_determine_rate+0x94/0xfc clk_rcg2_determine_rate+0x2c/0x38 clk_core_determine_round_nolock+0x4c/0x88 clk_core_round_rate_nolock+0x6c/0xa8 clk_core_round_rate_nolock+0x9c/0xa8 clk_core_set_rate_nolock+0x70/0x180 clk_set_rate+0x3c/0x6c of_clk_set_defaults+0x254/0x360 platform_drv_probe+0x28/0xb0 really_probe+0x120/0x2dc driver_probe_device+0x64/0xfc device_driver_attach+0x4c/0x6c __driver_attach+0xac/0xc0 bus_for_each_dev+0x84/0xcc driver_attach+0x2c/0x38 bus_add_driver+0xfc/0x1d0 driver_register+0x64/0xf8 __platform_driver_register+0x4c/0x58 msm_drm_register+0x5c/0x60 ... It turned out that clk_hw_get_parent_by_index() was returning NULL and we weren't checking. Let's check it so that we don't crash. Fixes: ac269395cdd8 ("clk: qcom: Convert to clk_hw based provider APIs") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.1.I7487325fe8e701a68a07d3be8a6a4b571eca9cfa@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()Stephen Boyd1-4/+4
[ Upstream commit 21e157c62eeded8b1558a991b4820b761d48a730 ] The DFS frequency table logic overwrites 'cfg' while detecting the parent clk and then later on in clk_rcg2_dfs_populate_freq() we use that same variable to figure out the mode of the clk, either MND or not. Add a new variable to hold the parent clk bit so that 'cfg' is left untouched for use later. This fixes problems in detecting the supported frequencies for any clks in DFS mode. Fixes: cc4f6944d0e3 ("clk: qcom: Add support for RCG to register for DFS") Reported-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20200128193329.45635-1-sboyd@kernel.org Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-23clk: qcom: gcc-sdm845: Add missing flag to votable GDSCsGeorgi Djakov1-0/+7
commit 5e82548e26ef62e257dc2ff37c11acb5eb72728e upstream. On sdm845 devices, during boot we see the following warnings (unless we have added 'pd_ignore_unused' to the kernel command line): hlos1_vote_mmnoc_mmu_tbu_sf_gdsc status stuck at 'on' hlos1_vote_mmnoc_mmu_tbu_hf1_gdsc status stuck at 'on' hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc status stuck at 'on' hlos1_vote_aggre_noc_mmu_tbu2_gdsc status stuck at 'on' hlos1_vote_aggre_noc_mmu_tbu1_gdsc status stuck at 'on' hlos1_vote_aggre_noc_mmu_pcie_tbu_gdsc status stuck at 'on' hlos1_vote_aggre_noc_mmu_audio_tbu_gdsc status stuck at 'on' As the name of these GDSCs suggests, they are "votable" and in downstream DT, they all have the property "qcom,no-status-check-on-disable", which means that we should not poll the status bit when we disable them. Luckily the VOTABLE flag already exists and it does exactly what we need, so let's make use of it to make the warnings disappear. Fixes: 06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845") Reported-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lkml.kernel.org/r/20191126153437.11808-1-georgi.djakov@linaro.org Tested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04clk: qcom: Allow constant ratio freq tables for rcgJeffrey Hugo2-0/+5
[ Upstream commit efd164b5520afd6fb2883b68e0d408a7de29c491 ] Some RCGs (the gfx_3d_src_clk in msm8998 for example) are basically just some constant ratio from the input across the entire frequency range. It would be great if we could specify the frequency table as a single entry constant ratio instead of a long list, ie: { .src = P_GPUPLL0_OUT_EVEN, .pre_div = 3 }, { } So, lets support that. We need to fix a corner case in qcom_find_freq() where if the freq table is non-null, but has no frequencies, we end up returning an "entry" before the table array, which is bad. Then, we need ignore the freq from the table, and instead base everything on the requested freq. Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20191031185715.15504-1-jeffrey.l.hugo@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04clk: qcom: smd: Add missing pnoc clockJeffrey Hugo1-0/+3
[ Upstream commit ba1d366de261981c0dd04fac44d2ce3a5eba2eaa ] When MSM8998 support was added, and analysis was done to determine what clocks would be consumed. That analysis had a flaw, which caused the pnoc to be skipped. The pnoc clock needs to be on to access the uart for the console. The clock is on from boot, but has no consumer votes in the RPM. When we attempt to boot the modem, it causes the RPM to turn off pnoc, which kills our access to the console and causes CPU hangs. We need pnoc to be defined, so that clk_smd_rpm_handoff() will put in an implicit vote for linux and prevent issues when booting modem. Hopefully pnoc can be consumed by the interconnect framework in future so that Linux can rely on explicit votes. Fixes: 6131dc81211c ("clk: qcom: smd: Add support for MSM8998 rpm clocks") Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20191107190615.5656-1-jeffrey.l.hugo@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21Merge tag 'clk-for-linus' of ↵Linus Torvalds16-61/+3925
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a small collection of core framework updates this time, mostly around clk registration by clk providers and debugfs "nice to haves" for rate constraints. I'll highlight that we're now setting the clk_init_data pointer inside struct clk_hw to NULL during clk_register(), which may break some drivers that thought they could use that pointer during normal operations. That change has been sitting in next for a while now but maybe something is still broken. We'l see. Other than that the core framework changes aren't invasive and they're fixing bugs, simplifying, and making things better. On the clk driver side we got the usual addition of new SoC support, new features for existing drivers, and bug fixes scattered throughout. The biggest diffstat is the Amlogic driver that gained CPU clk support in addition to migrating to the new way of specifying clk parents. After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got support for various new SoCs and clock controllers from those vendors. Core: - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs - Set clk_init_data pointer inside clk_hw to NULL after registration - Make clk_bulk_get_all() return an 'id' corresponding to clock-names - Evict parents from parent cache when they're unregistered New Drivers: - Add clock driver for i.MX8MN SoCs - Support aspeed AST2600 SoCs - Support for Mediatek MT6779 SoCs - Support qcom SM8150 GCC and RPMh clks - Support qcom QCS404 WCSS clks - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) - Addition of clock driver for Rockchip rk3308 SoCs Updates: - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Add SDIO gate support to aspeed driver - Add missing of_node_put() calls in various clk drivers - Migrate Amlogic driver to new clock parent description method - Add DVFS support to Amlogic Meson g12 - Add Amlogic Meson g12a reset support to the axg audio clock controller - Add sm1 support to the Amlogic Meson g12a clock controller - Switch i.MX8MM clock driver to platform driver - Add Hifi4 DSP related clocks for i.MX8QXP SoC - Fix Audio PLL setting and parent clock for USB - Misc i.MX8 clock driver improvements and corrections - Set floor ops for Qualcomm SD clks so that rounding works - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1 - Enable the Allwinner V3 SoC and fix the i2s clock for H6" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: Drop !clk checks in debugfs dumping clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: sprd: add missing kfree clk: at91: allow 24 Mhz clock as input for PLL clk: Make clk_bulk_get_all() return a valid "id" clk: actions: Fix factor clk struct member access clk: qcom: rcg: Return failure for RCG update clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h ...
2019-09-20Merge branches 'clk-init-destroy', 'clk-doc', 'clk-imx' and 'clk-allwinner' ↵Stephen Boyd2-9/+3
into clk-next - Set clk_init_data pointer inside clk_hw to NULL after registration * clk-init-destroy: clk: Overwrite clk_hw::init with NULL during clk_register() clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registered clk: ti: Don't reference clk_init_data after registration clk: qcom: Remove error prints from DFS registration rtc: sun6i: Don't reference clk_init_data after registration clk: zx296718: Don't reference clk_init_data after registration clk: milbeaut: Don't reference clk_init_data after registration clk: socfpga: deindent code to proper indentation phy: ti: am654-serdes: Don't reference clk_init_data after registration clk: sprd: Don't reference clk_init_data after registration clk: socfpga: Don't reference clk_init_data after registration clk: sirf: Don't reference clk_init_data after registration clk: qcom: Don't reference clk_init_data after registration clk: meson: axg-audio: Don't reference clk_init_data after registration clk: lochnagar: Don't reference clk_init_data after registration clk: actions: Don't reference clk_init_data after registration * clk-doc: clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h clk: Document of_parse_clkspec() some more clk: Remove extraneous 'for' word in comments * clk-imx: (32 commits) clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: imx: imx8mn: fix audio pll setting clk: imx8mn: Add necessary frequency support for ARM PLL table clk: imx8mn: Add missing rate_count assignment for each PLL structure clk: imx8mn: fix int pll clk gate clk: imx8mn: Add GIC clock clk: imx8mn: Fix incorrect parents clk: imx8mm: Fix incorrect parents clk: imx8mq: Fix sys3 pll references clk: imx8mq: Unregister clks when of_clk_add_provider failed clk: imx8mm: Unregister clks when of_clk_add_provider failed clk: imx8mq: Mark AHB clock as critical clk: imx8mn: Keep uart clocks on for early console clk: imx: Remove unused function statement clk: imx7ulp: Make sure earlycon's clock is enabled clk: imx8mm: Switch to platform driver clk: imx: imx8mm: fix audio pll setting ... * clk-allwinner: clk: sunxi-ng: h6: Allow I2S to change parent rate clk: sunxi-ng: v3s: add Allwinner V3 support clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU clk: sunxi-ng: v3s: add the missing PLL_DDR1
2019-09-17clk: qcom: rcg: Return failure for RCG updateTaniya Das1-1/+1
In case of update config failure, return -EBUSY, so that consumers could handle the failure gracefully. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1557339895-21952-2-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-09clk: qcom: fix QCS404 TuringCC regmapJorge Ramirez-Ortiz1-1/+1
The max register is 0x23004 as per the manual (the current max_register that this commit is fixing is actually out of bounds). Fixes: 892df0191b29 ("clk: qcom: Add QCS404 TuringCC") Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Link: https://lkml.kernel.org/r/20190909085430.8700-1-jorge.ramirez-ortiz@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-09clk: qcom: clk-rpmh: Add support for SM8150Vinod Koul1-0/+28
Add support for rpmh clocks found in SM8150 Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lkml.kernel.org/r/20190826173120.2971-5-vkoul@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-09clk: qcom: clk-rpmh: Convert to parent data schemeVinod Koul1-2/+8
Convert the rpmh clock driver to use the new parent data scheme by specifying the parent data for board clock. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lkml.kernel.org/r/20190826173120.2971-3-vkoul@kernel.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-09clk: qcom: gcc: Use floor ops for SDCC clocksTaniya Das4-6/+6
Update global clock controller SDCC2/4 clocks to use the floor rcg ops, so as to use the rounded down clock rates for these clocks. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/20190909074410.18977-1-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-09clk: qcom: gcc-qcs404: Use floor ops for sdcc clksVinod Koul1-2/+2
Update the gcc qcs404 clock driver to use floor ops for sdcc clocks. As disuccsed in [1] it is good idea to use floor ops for sdcc clocks as we dont want the clock rates to do round up. [1]: https://lore.kernel.org/linux-arm-msm/20190830195142.103564-1-swboyd@chromium.org/ Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lkml.kernel.org/r/20190906045659.20621-1-vkoul@kernel.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-09clk: qcom: gcc-sdm845: Use floor ops for sdcc clksStephen Boyd1-2/+2
Some MMC cards fail to enumerate properly when inserted into an MMC slot on sdm845 devices. This is because the clk ops for qcom clks round the frequency up to the nearest rate instead of down to the nearest rate. For example, the MMC driver requests a frequency of 52MHz from clk_set_rate() but the qcom implementation for these clks rounds 52MHz up to the next supported frequency of 100MHz. The MMC driver could be modified to request clk rate ranges but for now we can fix this in the clk driver by changing the rounding policy for this clk to be round down instead of round up. Fixes: 06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845") Reported-by: Douglas Anderson <dianders@chromium.org> Cc: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lkml.kernel.org/r/20190830195142.103564-1-swboyd@chromium.org Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-20drivers: qcom: Add BCM vote macro to headerJordan Crouse1-13/+3
The macro to generate a Bus Controller Manager (BCM) TCS command is used by the interconnect driver but might also be interesting to other drivers that need to construct TCS commands for sub processors so move it out of the sdm845 specific file and into the header. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-16clk: qcom: Remove error prints from DFS registrationStephen Boyd1-7/+1
These aren't useful and they reference the init structure name. Let's just drop them. Cc: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190815160020.183334-5-sboyd@kernel.org Acked-by: Taniya Das <tdas@codeaurora.org>
2019-08-16clk: qcom: Don't reference clk_init_data after registrationStephen Boyd1-2/+2
A future patch is going to change semantics of clk_register() so that clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid referencing this member here so that we don't run into NULL pointer exceptions. Cc: Taniya Das <tdas@codeaurora.org> Cc: Andy Gross <agross@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190731193517.237136-5-sboyd@kernel.org Acked-by: Taniya Das <tdas@codeaurora.org>
2019-08-08clk: qcom: define probe by index API as common APIGovind Singh3-21/+24
Extend the probe by index API in common code to be used by other qcom clock controller. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-08clk: qcom: Add WCSS gcc clock control for QCS404Govind Singh1-0/+30
Add support for the WCSS QDSP gcc clock control used on qcs404 based devices. This would allow wcss remoteproc driver to control the required gcc clocks to bring the subsystem out of reset. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-08clk: qcom: msm8916: Don't build by defaultMarc Gonzalez1-2/+0
QCOM_A53PLL and QCOM_CLK_APCS_MSM8916 stand out as the only options built by default. Let's bring them back in line with the rest. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Link: https://lkml.kernel.org/r/d654907d-a3a2-a00f-d6f5-3a34ae25ebcf@free.fr Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-08clk: qcom: gcc: Add global clock controller driver for SM8150Deepak Katragadda3-0/+3596
Add the clocks supported in global clock controller which clock the peripherals like BLSPs, SDCC, USB, MDSS etc. Register all the clocks to the clock framework for the clients to be able to request for them. Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> [vkoul: port to upstream and tidy-up port to new parent scheme Add comments for critical clocks]] Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lkml.kernel.org/r/20190722074348.29582-6-vkoul@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-08clk: qcom: clk-alpha-pll: Add support for Trion PLLsDeepak Katragadda2-0/+224
Add programming sequence support for managing the Trion PLLs. Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> [vkoul: port to upstream and tidy-up use upstream way of specifying PLLs] Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lkml.kernel.org/r/20190722074348.29582-4-vkoul@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 22:29:03 +0300