Age | Commit message (Collapse) | Author | Files | Lines |
|
Use the floor ops to prevent warnings like this at suspend exit and boot:
mmc0: Card appears overclocked; req 800000 Hz, actual 25000000 Hz
Fixes: db0c944ee92b ("clk: qcom: Add clock driver for SM8450")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230811-topic-8450_clk-v1-1-88031478d548@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
With the removal of the mem noc clocks in the commit e224dc703521 ("clk:
qcom: gcc-ipq5332: drop the mem noc clocks"), we can drop the
gcc_apss_axi_clk_src clock as well, since there are no clocks uses this
clock as a parent.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230710102807.1189942-3-quic_kathirav@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Due to the recent design changes, all the mem noc clocks will be
configured by the bootloaders and it will be access protected by the TZ
firmware. So drop these clocks from the GCC driver.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230710102807.1189942-2-quic_kathirav@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Some branch clocks are governed externally and we're only supposed to
send a request concerning their shutdown, not actually ensure it happens.
Use the BRANCH_HALT_SKIP define to skip checking the halt bit.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-6-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
GPUCC has its own GPLL0 legs - one for 1-1 and one for div-2 output.
Add .name lookup to make sure older DTs consume the correct clock.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-5-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Up until now, the GPLL0_DIV MMSS input has been modeled as a fixed
child of MMSS_GPLL0_DIV that's always-on. Properly representing the
former in the GCC driver makes us unable to keep doing so.
Consume MSS_GPLL0_DIV through fw_name ("gpll0_div") as well as add a
fixed .name link to keep backwards compatibility.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-4-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Up until now, we've been relying on some non-descript hardware magic
to pinkypromise turn the clocks on for us. While new SoCs shine with
that feature, MSM8998 can not always be fully trusted.
Register the MMSS and GPUSS GPLL0 legs with the CCF to allow for manual
enable voting.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-3-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for the global clock controller found on IPQ5018
based devices.
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Co-developed-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Link: https://lore.kernel.org/r/1690533192-22220-3-git-send-email-quic_srichara@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
GPLL7 is not on by default, which causes a "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error when booting. Set .flags =
CLK_OPS_PARENT_ENABLE to fix the error.
Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230804-sm6350-sdcc2-v1-1-3d946927d37d@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use the fsleep() helper that (based on the length of the delay, see: [1])
chooses the correct sleep/delay functions.
[1] https://www.kernel.org/doc/Documentation/timers/timers-howto.txt
Fixes: 2cb8a39b6781 ("clk: qcom: reset: Allow specifying custom reset delay")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-qcom_reset-v3-1-5958facd5db2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The SM_GCC_8550 symbol and others can only be built for ARM64 or when
compile testing, but it gets selected by other drivers that can also be
built for 32-bit ARCH_QCOM when not compile testing, which results in
a Kconfig warning:
WARNING: unmet direct dependencies detected for SM_GCC_8550
Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=m] && (ARM64 || COMPILE_TEST [=n])
Selected by [m]:
- SM_GPUCC_8550 [=m] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=m]
- SM_VIDEOCC_8550 [=m] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=m]
Add further 'depends on' statements to tighten this in a way that
avoids the missing dependencies.
Fixes: fd0b5b106fcab ("clk: qcom: Introduce SM8350 VIDEOCC")
Fixes: 441fe711be384 ("clk: qcom: videocc-sm8450: Add video clock controller driver for SM8450")
Fixes: f53153a37969c ("clk: qcom: videocc-sm8550: Add video clock controller driver for SM8550")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230801105718.3658612-1-arnd@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
GPLL9 is not on by default, which causes a "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error when booting. Set .flags =
CLK_OPS_PARENT_ENABLE to fix the error.
Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Patrick Whewell <patrick.whewell@sightlineapplications.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230802210359.408-1-patrick.whewell@sightlineapplications.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The pxo_parent_data inroduced in commit bac4675a4d1b ("clk: qcom:
drop lcc-mdm9615 in favour of lcc-msm8960") is only used in lcc-msm8960.c
now, change it to static.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803082125.521849-1-yangyingliang@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error.
Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
Signed-off-by: David Wronek <davidwronek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230723190725.1619193-2-davidwronek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The CBF PLL on MSM8996 Pro has a /4 post divisor instead of /2. Handle the
difference accordingly.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230527093934.101335-4-y.oudjana@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The gcc and lcc devices have been switched to the DT-defined cxo_board
clock. Now we can drop the manually defined cxo clock.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-9-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Convert the clock driver to specify parent data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names. Use parent_hws where possible to refer parent
clocks directly, skipping the lookup.
Note, the system names for xo clocks were changed from "cxo" to
"cxo_board" to follow the example of other platforms. This switches the
clocks to use DT-provided "cxo_board" clock instead of manually
registered "cxo" clock and allows us to drop the cxo clock.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-8-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The pll0_vote clock definitely should have pll0 as a parent (instead of
pll8).
Fixes: 7792a8d6713c ("clk: mdm9615: Add support for MDM9615 Clock Controllers")
Cc: stable@kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-7-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The two LCC drivers, msm8960 and mdm9615 are almost the same. The only
difference is the platform clock: msm8960/apq8064 use pxo, while mdm9615
uses cxo. Drop the lcc-mdm9615 in favour of using lcc-msm8960 instead.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-6-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The header file for qcom,lcc-mdm9615 and qcom,lcc-msm8960 is the same
(as well as the drivers). Drop the qcom,lcc-mdm9615.h in favour of
qcom,lcc-msm8960.h
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SC8280XP, being a partial derivative of SM8350, shares almost the exact
same videocc block. Extend the 8350 driver to support the bigger brother.
The only notable changes are higher possible frequencies on some clocks
and some switcheroo within the XO/sleep registers (probably due to some
different board crystal configuration).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230703-topic-8280_videocc-v2-2-c88269806269@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The DISP_CC GDSCs have not been instructed to use the ret registers.
Fix that.
Fixes: 4a66e76fdb6d ("clk: qcom: Add SC8280XP display clock controller")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230725-topic-8280_dispcc_gdsc-v1-1-236590060531@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # samsung
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143156.1066339-1-robh@kernel.org
Acked-by: Abel Vesa <abel.vesa@linaro.org> #imx
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Drivers that enable runtime PM must make sure that the controller is
runtime resumed before accessing its registers to prevent the power
domain from being disabled.
Fixes: 892df0191b29 ("clk: qcom: Add QCS404 TuringCC")
Cc: stable@vger.kernel.org # 5.2
Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Drivers that enable runtime PM must make sure that the controller is
runtime resumed before accessing its registers to prevent the power
domain from being disabled.
Fixes: 8def929c4097 ("clk: qcom: Add modem clock controller driver for SC7180")
Cc: stable@vger.kernel.org # 5.7
Cc: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Drivers that enable runtime PM must make sure that the controller is
runtime resumed before accessing its registers to prevent the power
domain from being disabled.
Fixes: 6cdef2738db0 ("clk: qcom: Add Q6SSTOP clock controller for QCS404")
Cc: stable@vger.kernel.org # 5.5
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Drivers that enable runtime PM must make sure that the controller is
runtime resumed before accessing its registers to prevent the power
domain from being disabled.
Fixes: 4ab43d171181 ("clk: qcom: Add lpass clock controller driver for SC7280")
Cc: stable@vger.kernel.org # 5.16
Cc: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Make sure to decrement the runtime PM usage count before returning in
case RCG dynamic frequency switch initialisation fails.
Fixes: 2a541abd9837 ("clk: qcom: gcc-sc8280xp: Add runtime PM")
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Make sure to decrement the runtime PM usage count before returning in
case regmap initialisation fails.
Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Cc: stable@vger.kernel.org # 6.3
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Make sure to decrement the runtime PM usage count before returning in
case regmap initialisation fails.
Fixes: 16fb89f92ec4 ("clk: qcom: Add support for Display Clock Controller on SM8450")
Cc: stable@vger.kernel.org # 6.1
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
To make sure that the controller is runtime resumed and its power domain
is enabled before accessing its registers during probe, the synchronous
runtime PM interface must be used.
Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones")
Cc: stable@vger.kernel.org # 5.11
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
clk-for-6.6
This series reshuffles things around, moving the management of SMD RPM
bus clocks to the interconnect framework where they belong. This helps
us solve a couple of issues:
1. We can work towards unused clk cleanup of RPMCC without worrying
about it killing some NoC bus, resulting in the SoC dying.
Deasserting actually unused RPM clocks (among other things) will
let us achieve "true SoC-wide power collapse states", also known as
VDD_LOW and VDD_MIN.
2. We no longer have to keep tons of quirky bus clock ifs in the icc
driver. You either have a RPM clock and call "rpm set rate" or you
have a single non-RPM clock (like AHB_CLK_SRC) or you don't have any.
3. There's less overhead - instead of going through layers and layers of
the CCF, ratesetting comes down to calling max() and sending a single
RPM message. ICC is very very dynamic so that's a big plus.
The clocks still need to be vaguely described in the clk-smd-rpm driver,
as it gives them an initial kickoff, before actually telling RPM to
enable DVFS scaling. After RPM receives that command, all clocks that
have not been assigned a rate are considered unused and are shut down
in hardware, leading to the same issue as described in point 1.
We can consider marking them __initconst in the future, but this series
is very fat even without that..
Apart from that, it squashes a couple of bugs that really need fixing..
The series is merged through a topic branch to manage the dependencies
between interconnect, Qualcomm clocks and Qualcomm SoC.
|
|
The interconnect bus clocks are now handled within the ICC framework.
They still however need to get a kickstart *before* we call
clk_smd_rpm_enable_scaling(), or RPM will assume that they should all
be running at 0 kHz and the system will inevitably die.
Separate them out to ensure such a kickstart can still take place.
As a happy accident, the file got smaller:
Total: Before=41951, After=41555, chg -0.94%
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-18-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
icc_smd_rpm will do bus clock votes itself rather than taking the
unnecessary detour through the clock subsystem. However, it can only
do that after the clocks have been handed off and scaling has been
enabled in the RPM in clk-smd-rpm.
Move the icc_smd_rpm registration from smd-rpm.c to clk-smd-rpm.c
to avoid any possible races. icc_smd_rpm gets the driver data from
the smd-rpm device, so still register the platform device on the
smd-rpm parent device.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Konrad: remove unrelated cleanups]
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-5-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In preparation for handling the bus clocks in the icc driver, carve out
some defines and a struct definition to the common rpm header.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-4-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
With the minimal system suspend support in place for the PCIe driver that
keeps the interconnect path voted, the ALWAYS_ON flag can now be dropped.
Also, the pwrsts PWRSTS_RET_ON flag should be used to allow the GDSCs to
enter the retention state when the parent domain get's turned off during
system suspend.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230707075926.11726-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error.
Fixes: a808d58ddf29 ("clk: qcom: Add Global Clock Controller (GCC) driver for SM7150")
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230630191944.20282-1-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
There are 10 more GDSCs that we've not been caring about, and by extension
(and perhaps even more importantly), not putting to sleep. Add them.
Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-3-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All of the 8280's GCC GDSCs can and should use the retain registers so
as not to lose their state when entering lower power modes.
Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-1-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
fw_name for GCC inputs didn't match the bindings. Fix it.
Fixes: 013804a727a0 ("clk: qcom: Add GPU clock controller driver for SM6350")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-2-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the nowadays-prefered and marginally faster way of looking up parent
clocks in the device tree. It also allows for clock-names-independent
operation, so long as the order (which is enforced by schema) is kept.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-1-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the clocks needed for enabling USB in IPQ9574
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/d1c5aa4a8535c645fdb06df62a562918516ba0c6.1686289721.git.quic_varada@quicinc.com
[bjorn: Clock defines split out to separate commit]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On msm8226 we also have OXILICX_GDSC but we need a slighly different
config, with a .cxcs defined for clock but with no parent.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230506-msm8226-oxilicx-v2-1-f7e4ebff3d61@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"Another set of clk driver updates and fixes for the merge window. The
driver updates needed more time to bake in linux-next.
Updates:
- Support for more clk controllers in Qualcomm SoCs such as SM8350,
SM8450, SDX75, SC8280XP, and IPQ9574
- Runtime PM enablement of some more Qualcomm clk controllers
- Various fixes to Qualcomm clk driver data to use correct clk_ops
and to check halt bits properly
- AT91 updates to modernize with clk_parent_data structures
Fixes:
- Remove 'syscon' from dt binding fix for ti,j721e-system-controller
- Fix determine rate in the Tegra driver that got wrecked by the
refactorting of muxes this merge window"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (69 commits)
clk: tegra: Avoid calling an uninitialized function
dt-bindings: mfd: ti,j721e-system-controller: Remove syscon from example
clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
clk: at91: sama7g5: switch to parent_hw and parent_data
clk: at91: sckc: switch to parent_data/parent_hw
clk: at91: clk-sam9x60-pll: add support for parent_hw
clk: at91: clk-utmi: add support for parent_hw
clk: at91: clk-system: add support for parent_hw
clk: at91: clk-programmable: add support for parent_hw
clk: at91: clk-peripheral: add support for parent_hw
clk: at91: clk-master: add support for parent_hw
clk: at91: clk-generated: add support for parent_hw
clk: at91: clk-main: add support for parent_data/parent_hw
clk: qcom: gcc-sc8280xp: Add runtime PM
clk: qcom: gpucc-sc8280xp: Add runtime PM
clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
clk: qcom: gpucc-sm6375: Enable runtime pm
dt-bindings: clock: sm6375-gpucc: Add VDD_GX
clk: qcom: gcc-sm6115: Add missing PLL config properties
clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
...
|
|
The GCC block on SC8280XP is powered by the CX rail. We need to ensure
that it's enabled to prevent unwanted power collapse.
Enable runtime PM to keep the power flowing only when necessary.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230619-topic-sc8280xp-clk-rpm-v1-2-1e5e1064cdb2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The GPU_CC block on SC8280XP is powered by the GFX rail. We need to
ensure that it's enabled to prevent unwanted power collapse.
Enable runtime PM to keep the power flowing only when necessary.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230619-topic-sc8280xp-clk-rpm-v1-1-1e5e1064cdb2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Using PWRSTS_RET on msm8974's MDSS_GDSC causes display to stop working.
The gdsc doesn't fully come out of retention mode. Change it's pwrsts
flags to PWRSTS_OFF_ON.
Fixes: d399723950c4 ("clk: qcom: gdsc: Fix the handling of PWRSTS_RET support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230507175335.2321503-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The GPUCC block on SM6375 is powered by VDD_CX and VDD_GX. If the latter
rail is not online, GX_GDSC will never turn on. Enable runtime pm so that
we can reference VDD_GX from the dt to ensure that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230529-topic-sm6375gpuccpd-v1-2-8d57c41a6066@linaro.org
|
|
When the driver was ported upstream, PLL ctl register values were omitted.
Add them to ensure the PLLs are fully configured like we expect them to.
Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Iskren Chernev <me@iskren.info>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230601-topic-alpha_ctl-v1-2-b6a932dfcf68@linaro.org
|