| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There are few GPU clocks which are powering up the memories
and thus enable the FORCE_MEM_PERIPH always for these clocks
to force the periph_on signal to remain active during halt
state of the clock.
Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280")
Fixes: 3e0f01d6c7e7 ("clk: qcom: Add graphics clock controller driver for SC7280")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Link: https://lore.kernel.org/r/1666159535-6447-1-git-send-email-quic_c_skakit@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The USB controllers on sc7280 do not retain the state when
the system goes into low power state and the GDSCs are
turned off. This results in the controllers reinitializing and
re-enumerating all the connected devices (resulting in additional
delay while coming out of suspend)
Fix this by updating the .pwrsts for the USB GDSCs so they only
transition to retention state in low power.
Since sc7280 only supports cx (parent of usb gdscs) Retention, there
are no cxcs offsets mentioned in order to support the Retention
state.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220920111517.10407-3-quic_rjendra@quicinc.com
|
|
Enabling PCIe GDSC retention to ensure controller and its
dependent clocks won't go down during system suspend.
Update the .pwrsts for PCIe GDSC so it only transitions
to RET in low power.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1663669347-29308-6-git-send-email-quic_krichai@quicinc.com
|
|
Use newly defined clk_regmap_phy_mux_ops for PCIe pipe clocks to let
the clock framework automatically park the clock when the clock is
switched off and restore the parent when the clock is switched on.
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220608105238.2973600-4-dmitry.baryshkov@linaro.org
|
|
The gcc cfg noc lpass clock is required to be always enabled for the
LPASS core and audio drivers to be functional.
Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1640018638-19436-4-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
After commit 3165d1e3c737 ("clk: qcom: gcc: Remove CPUSS clocks control
for SC7280") this array is unused. Remove it.
Reported-by: kernel test robot <lkp@intel.com>
Cc: Taniya Das <tdas@codeaurora.org>
Fixes: 3165d1e3c737 ("clk: qcom: gcc: Remove CPUSS clocks control for SC7280")
Link: https://lore.kernel.org/r/20211014191259.1689641-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The CPUSS clocks are kept always ON and at a fixed frequency of 100MHZ
from the bootloader and no longer required to be controlled from HLOS.
Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1633579571-25475-1-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
There is a requirement to support 52MHz for qup clocks for bluetooth
usecase, thus update the frequency table to support the frequency.
Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1624449471-9984-1-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-21-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add support for the global clock controller found on SC7280
based devices. This should allow most non-multimedia device
drivers to probe and control their clocks.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1612981579-17391-3-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
