summaryrefslogtreecommitdiff
path: root/drivers/clk/qcom/gcc-ipq806x.c
AgeCommit message (Collapse)AuthorFilesLines
2022-11-06clk: qcom: gcc-ipq806x: use parent_data for the last remaining entryDmitry Baryshkov1-1/+3
Use parent_data for the last remaining entry (pll4). This clock is provided by the lcc device. Fixes: cb02866f9a74 ("clk: qcom: gcc-ipq806x: convert parent_names to parent_data") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220927113826.246241-3-dmitry.baryshkov@linaro.org
2022-03-09clk: qcom: gcc-ipq806x: add CryptoEngine resetsAnsuel Smith1-0/+5
Add missing CryptoEngine resets. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-15-ansuelsmth@gmail.com
2022-03-09clk: qcom: gcc-ipq806x: add CryptoEngine clocksAnsuel Smith1-0/+244
Add missing CryptoEngine clocks and pll11 required clock. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-13-ansuelsmth@gmail.com
2022-03-09clk: qcom: gcc-ipq806x: add additional freq for sdc tableAnsuel Smith1-1/+2
Add additional freq supported for the sdc table. The ops are changed to the floor_ops to handle a freq request of 52kHz where we need to provide a freq of 51.2kHz instead for stability reason. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-11-ansuelsmth@gmail.com
2022-03-09clk: qcom: gcc-ipq806x: add unusued flag for critical clockAnsuel Smith1-4/+5
Some clocks are used by other devices present on the SoC. For example the gsbi4_h_clk is used by RPM and is if disabled cause the RPM to reject any regulator change command. These clock should never be disabled. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-9-ansuelsmth@gmail.com
2022-03-09clk: qcom: gcc-ipq806x: add additional freq nss coresAnsuel Smith1-3/+21
Ipq8065 SoC (an evolution of ipq8064 SoC) contains nss cores that can be clocked to 800MHz. Add these missing freq to the gcc driver. Set the freq_tbl for the ubi32_cores to the correct values based on the machine compatible. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-8-ansuelsmth@gmail.com
2022-03-09clk: qcom: gcc-ipq806x: use ARRAY_SIZE for num_parentsAnsuel Smith1-34/+34
Use ARRAY_SIZE for num_parents instead of hardcoding the value. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-7-ansuelsmth@gmail.com
2022-03-09clk: qcom: gcc-ipq806x: convert parent_names to parent_dataAnsuel Smith1-113/+173
Convert parent_names to parent_data to modernize the driver. Where possible use parent_hws directly. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-6-ansuelsmth@gmail.com
2022-03-09clk: qcom: gcc-ipq806x: fix wrong naming for gcc_pxo_pll8_pll0Ansuel Smith1-10/+10
Parent gcc_pxo_pll8_pll0 had the parent definition and parent map swapped. Fix this naming error. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-5-ansuelsmth@gmail.com
2020-07-21ipq806x: gcc: add support for child probeAnsuel Smith1-1/+1
Add support for child probing needed for tsens driver that share the same regs of gcc for this platform. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200716022817.30439-2-ansuelsmth@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21ipq806x: gcc: Added the enable regs and mask for PRNGAbhishek Sahu1-0/+2
Kernel got hanged while reading from /dev/hwrng at the time of PRNG clock enable Fixes: 24d8fba44af3 "clk: qcom: Add support for IPQ8064's global clock controller (GCC)" Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Link: https://lkml.kernel.org/r/20200318131657.345-1-ansuelsmth@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-17clk: qcom: Add IPQ806X's HFPLLsStephen Boyd1-0/+82
Describe the HFPLLs present on IPQ806X devices. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-19clk: qcom: drop CLK_SET_RATE_GATE from sdc clocksJerome Brunet1-3/+0
the mmci driver (drivers/mmc/host/mmci.c) does the following sequence: * clk_prepare_enable() * clk_set_rate() on SDCx_clk which is a children of SDCx_src. SDCx_src has CLK_SET_RATE_GATE so this sequence should not be allowed but this was not enforced. IOW, the flag is ignored. Dropping the flag won't change anything to the current behaviour of the platform. CLK_SET_RATE_GATE is being fixed and enforced now. If the flag was kept, the mmci driver would receive -EBUSY when calling clk_set_rate() Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180619134051.16726-2-jbrunet@baylibre.com
2016-11-10clk: qcom: ipq806x: Fix board clk ratesStephen Boyd1-2/+2
The clocks on these boards run at 25 MHz, not 19.2 and 27 like other platforms. Unfortunately I copy/pasted from other similar SoCs but forgot this one is different. Fix it. Fixes: a085f877a882 ("clk: qcom: Move cxo/pxo/xo into dt files") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-04clk: qcom: Remove CLK_IS_ROOTStephen Boyd1-37/+0
This flag is a no-op now. Remove usage of the flag. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-13Revert "clk: qcom: Specify LE device endianness"Stephen Boyd1-1/+0
This reverts commit 329cabcecf94d8d7821e729dda284ba9dec44c87. The commit that caused us to specify LE device endianness here, 29bb45f25ff3 (regmap-mmio: Use native endianness for read/write, 2015-10-29), has been reverted in mainline so now when we specify LE it actively breaks big endian kernels because the byte swapping in regmap-mmio is incorrect. Let's revert this change because it will 1) fix the big endian kernels and 2) be redundant to specify LE because that will become the default soon. Cc: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@baylibre.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-21clk: qcom: Specify LE device endiannessStephen Boyd1-0/+1
All these clock controllers are little endian devices, but so far we've been relying on the regmap mmio bus handling this for us without explicitly stating that fact. After commit 4a98da2164cf (regmap-mmio: Use native endianness for read/write, 2015-10-29), the regmap mmio bus will read/write with the __raw_*() IO accessors, instead of using the readl/writel() APIs that do proper byte swapping for little endian devices. So if we're running on a big endian processor and haven't specified the endianness explicitly in the regmap config or in DT, we're going to switch from doing little endian byte swapping to big endian accesses without byte swapping, leading to some confusing results. On my apq8074 dragonboard, this causes the device to fail to boot as we access the clock controller with big endian IO accesses even though the device is little endian. Specify the endianness explicitly so that the regmap core properly byte swaps the accesses for us. Reported-by: Kevin Hilman <khilman@linaro.org> Tested-by: Tyler Baker <tyler.baker@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-16clk: qcom: Move cxo/pxo/xo into dt filesStephen Boyd1-8/+6
Put these clocks into the dt files instead of registering them from C code. This provides a few benefits. It allows us to specify the frequency of these clocks at the board level instead of hard-coding them in the driver. It allows us to insert an RPM clock in between the consumers of the crystals and the actual clock. And finally, it helps us transition the GCC driver to use RPM clocks when that configuration is enabled. Cc: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-09clk: qcom: Drop calls to qcom_cc_remove()Stephen Boyd1-7/+0
Now that qcom_cc_remove() is a nop, drop calls to qcom_cc_remove() and any empty driver remove functions. Cc: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07clk: qcom: Constify the parent names arraysGeorgi Djakov1-5/+5
Make const both the array and the strings, so they can be moved to .rodata section. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-31clk: qcom: Add support for NSS/GMAC clocks and resetsStephen Boyd1-1/+593
Add the NSS/GMAC clocks and the TCM clock and NSS resets. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07clk: qcom: Add EBI2 clocks for IPQ806xArchit Taneja1-0/+32
The NAND controller within EBI2 requires EBI2_CLK and EBI2_ALWAYS_ON_CLK clocks. Create structs for these clocks so that they can be used by the NAND controller driver. Add an entry for EBI2_AON_CLK in the gcc-ipq806x DT binding document. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-24clk: qcom: Introduce parent_map tablesGeorgi Djakov1-22/+24
In the current parent mapping code, we can get duplicate or inconsistent indexes, which leads to discrepancy between the number of elements in the array and the number of parents. Until now, this was solved with some reordering but this is not always possible. This patch introduces index tables that are used to define the relations between the PLL source and the hardware mux configuration value. To accomplish this, here we do the following: - Define a parent_map struct to map the relations between PLL source index and register configuration value. - Add a qcom_find_src_index() function for finding the index of a clock matching the specific PLL configuration. - Update the {set,get}_parent RCG functions use the newly introduced parent_map struct. - Convert all existing drivers to the new parent_map tables. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-12clk: qcom: Fix i2c frequency tableStephen Boyd1-1/+1
PXO is 25MHz, not 27MHz. Fix the table. Fixes: 24d8fba44af3 "clk: qcom: Add support for IPQ8064's global clock controller (GCC)" Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Andy Gross <agross@codeaurora.org> Tested-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-27clk: qcom: Add IPQ806X LPASS clock controller (LCC) driverRajendra Nayak1-0/+12
Add an LCC driver for IPQ806x that supports the i2s, S/PDIF, and pcm clocks. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Josh Cartwright <joshc@codeaurora.org> [sboyd@codeaurora.org: Reworded commit text, added Kconfig select, fleshed out Kconfig description a bit more, added pll4 configuration and reworked probe for it, added muxes, split out dt-binding file] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-10-20clk: qcom: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-27Merge tag 'qcom-clocks-for-3.18' of ↵Mike Turquette1-1/+30
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into clk-next qcom clock changes for 3.18 Some fixes for the IPQ driver and some code consolidation and refactoring.
2014-09-23clk: qcom: Add IPQ8064 PLL required for USBAndy Gross1-1/+30
This patch adds the PLL0 that is required for the USB clocks to work properly. Signed-off-by: Andy Gross <agross@codeaurora.org> Fixes: 24d8fba44af3 "clk: qcom: Add support for IPQ8064's global clock controller (GCC)" Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-09-03clk: qcom: Fix sdc 144kHz frequency entryStephen Boyd1-1/+1
The pre-divider for the sdc clocks only has 2 bits in it, so we can't possibly divide by anything larger than 4 here. Furthermore, we program the value of ~(n - m) and the n value is larger than 8 bits (max of 256). Replace this entry with 200kHz which is close enough to 144kHz to be usable. Cc: Kumar Gala <galak@codeaurora.org> Cc: Andy Gross <agross@codeaurora.org> Fixes: 24d8fba44af3 "clk: qcom: Add support for IPQ8064's global clock controller (GCC)" Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-16clk: qcom: Add support for IPQ8064's global clock controller (GCC)Kumar Gala1-0/+2424
Add a driver for the global clock controller found on IPQ8064 based platforms. This should allow most non-multimedia device drivers to probe and control their clocks. This is currently missing clocks for USB HSIC and networking devices. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 08:10:48 +0300