summaryrefslogtreecommitdiff
path: root/drivers/clk/meson
AgeCommit message (Collapse)AuthorFilesLines
2019-05-07Merge branches 'clk-doc', 'clk-more-critical', 'clk-meson' and ↵Stephen Boyd9-516/+2171
'clk-basic-be' into clk-next - Remove clk_readl() and introduce BE versions of basic clk types * clk-doc: clk: Drop duplicate clk_register() documentation clk: Document and simplify clk_core_get_rate_nolock() clk: Remove 'flags' member of struct clk_fixed_rate clk: nxp: Drop 'flags' on fixed_rate clk macro clk: Document __clk_mux_determine_rate() clk: Document CLK_MUX_READ_ONLY mux flag clk: Document deprecated things clk: Collapse gpio clk kerneldoc * clk-more-critical: clk: highbank: Convert to CLK_IS_CRITICAL * clk-meson: (21 commits) clk: meson: axg-audio: add g12a support clk: meson: axg-audio: don't register inputs in the onecell data clk: meson: axg_audio: replace prefix axg by aud dt-bindings: clk: axg-audio: add g12a support clk: meson: meson8b: add the video decoder clock trees clk: meson: meson8b: add the VPU clock trees clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2 clk: meson: meson8b: use a separate clock table for Meson8m2 dt-bindings: clock: meson8b: export the video decoder clocks clk: meson-g12a: add video decoder clocks dt-bindings: clock: meson8b: export the VPU clock clk: meson-g12a: add PCIE PLL clocks dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCIN clk: meson-pll: add reduced specific clk_ops for G12A PCIe PLL dt-bindings: clock: meson8b: drop the "ABP" clock definition clk: meson: g12a: add cpu clocks dt-bindings: clk: g12a-clkc: add VDEC clock IDs dt-bindings: clock: axg-audio: unexpose controller inputs dt-bindings: clk: g12a-clkc: add PCIE PLL clock ID clk: g12a-aoclk: re-export CLKID_AO_SAR_ADC_SEL clock id ... * clk-basic-be: clk: core: replace clk_{readl,writel} with {readl,writel} clk: core: remove powerpc special handling powerpc/512x: mark clocks as big endian clk: mux: add explicit big endian support clk: multiplier: add explicit big endian support clk: gate: add explicit big endian support clk: fractional-divider: add explicit big endian support clk: divider: add explicit big endian support
2019-04-08clk: meson: axg-audio: add g12a supportMaxime Jourdan2-8/+239
The g12a audio clock controller is largely similar to the existing axg controller, with the addition of the spdif output B and TDM pad clocks. This commit extends the existing axg audio clock controller driver to work with multiple compatibles and add the g12a specific clocks Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190329160649.31603-5-jbrunet@baylibre.com
2019-04-08clk: meson: axg-audio: don't register inputs in the onecell dataJerome Brunet2-44/+6
Clock inputs should not be exported outside the controller. It is a hack to have a stable global clock name within the clock controller, even for clocks external to the controller. There is an ongoing effort to replace this hack with something better. The first step is to not register those clocks in the provider anymore, so we can completely remove them later on. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190329160649.31603-4-jbrunet@baylibre.com
2019-04-08clk: meson: axg_audio: replace prefix axg by audJerome Brunet1-482/+482
The audio clock controller is compatible with axg and g12a SoC family. Having each clock name prefixed with "axg_" looks weird on the g12a. This change replace the "axg_" by "aud_" in fron the clock names. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190329160649.31603-3-jbrunet@baylibre.com
2019-04-01clk: meson: meson8b: add the video decoder clock treesMartin Blumenstingl2-1/+328
This adds the four video decoder clock trees. VDEC_1 is split into two paths on Meson8b and Meson8m2: - input mux called "vdec_1_sel" - two dividers ("vdec_1_1_div" and "vdec_1_2_div") and gates ("vdec_1_1" and "vdec_1_2") - and an output mux (probably glitch-free) called "vdec_1" On Meson8 the VDEC_1 tree is simpler because there's only one path: - input mux called "vdec_1_sel" - divider ("vdec_1_1_div") and gate ("vdec_1_1") - (the gate is used as output directly, there's no mux) The VDEC_HCODEC and VDEC_2 clocks are simple composite clocks each consisting of an input mux, divider and a gate. The VDEC_HEVC clock seems to have two paths similar to the VDEC_1 clock. However, the register offsets of the second clock path is not known. Amlogic's 3.10 kernel (which is used as reference) sets HHI_VDEC2_CLK_CNTL[31] to 1 before changing the VDEC_HEVC clock and back to 0 afterwards. For now, leave a TODO comment and only add the first path. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190324151423.19063-3-martin.blumenstingl@googlemail.com
2019-04-01clk: meson: meson8b: add the VPU clock treesMartin Blumenstingl2-1/+175
The VPU clock tree is slightly different on all three supported SoCs: Meson8 only has an input mux (which chooses between "fclk_div4", "fclk_div3", "fclk_div5" and "fclk_div7"), a divider and a gate. Meson8b has two VPU clock trees, each with an input mux (using the same parents as the input mux on Meson8), divider and a gates. The final VPU clock is a glitch-free mux which chooses between VPU_1 and VPU_2. Meson8m2 uses a similar clock tree as Meson8b but the last input clock is different: instead of using "fclk_div7" as input Meson8m2 uses "gp_pll". This was probably done in hardware to improve the accuracy of the clock because fclk_div7 gives us 2550MHz / 7 = 364.286MHz while GP_PLL can achieve 364.0MHz. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190324151104.18397-5-martin.blumenstingl@googlemail.com
2019-04-01clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2Martin Blumenstingl2-1/+66
Meson8m2 has a GP_PLL clock (similar to GP0_PLL on GXBB/GXL/GXM) which is used as input for the VPU clocks. The only supported frequency (based on Amlogic's vendor kernel sources) is 364MHz which is achieved using the following parameters: - input: XTAL (24MHz) - M = 182 - N = 3 - OD = 2 ^ 2 Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190324151104.18397-4-martin.blumenstingl@googlemail.com
2019-04-01clk: meson: meson8b: use a separate clock table for Meson8m2Martin Blumenstingl1-1/+192
Meson8, Meson8b and Meson8m2 implement a similar clock controller. However, there are a few differences between the three actual IP blocks. One example where Meson8m2 differs from Meson8b is the VPU clock setup: - the VPU input mux can choose between "fclk_div4", "fclk_div3", "fclk_div5" and "fclk_div7" on Meson8b - however, on Meson8m2 it can choose between "fclk_div4", "fclk_div3", "fclk_div5" and "gp_pll" (GP_PLL only exists on Meson8m2, it's the predecessor of the GP0_PLL clock on GXBB/GXL/GXM)) Add a separate clk_hw_onecell_data table for Meson8m2 so these differences can be implemented in our clock controller driver. For now meson8m2_hw_onecell_data is a clone of our existing meson8b_hw_onecell_data. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190324151104.18397-3-martin.blumenstingl@googlemail.com
2019-04-01clk: meson-g12a: add video decoder clocksMaxime Jourdan2-1/+170
Add the necessary clock parts for: - VDEC_1: used to feed VDEC_1 - VDEC_HEVC: the "back" part of the VDEC_HEVC block - VDEC_HEVCF: the "front" part of the VDEC_HEVC block In previous SoC generations (GXL, GXBB), there was only one VDEC_HEVC clock, which got split in two parts for G12A. Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190319101138.27520-2-mjourdan@baylibre.com
2019-04-01clk: meson-g12a: add PCIE PLL clocksNeil Armstrong2-1/+122
Add the PCIe reference clock feeding the USB3 + PCIE combo PHY. This PLL needs a very precise register sequence to permit to be locked, thus using the specific clk-pll pcie ops. The PLL is then followed by : - a fixed /2 divider - a 5-bit 1-based divider - a final /2 divider This reference clock is fixed to 100MHz, thus only a single PLL setup is added. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190307141455.23879-4-narmstrong@baylibre.com
2019-04-01clk: meson-pll: add reduced specific clk_ops for G12A PCIe PLLNeil Armstrong2-0/+27
The Meson G12A PCIE PLL is fined tuned to deliver a very precise 100MHz reference clock for the PCIe Analog PHY, and thus requires a strict register sequence to enable the PLL. To simplify, use the _init() op to enable the PLL and keep the other ops except set_rate since the rate is fixed. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190307141455.23879-2-narmstrong@baylibre.com
2019-04-01clk: meson: g12a: add cpu clocksNeil Armstrong2-1/+371
Add the Amlogic G12A Family CPU Clock tree in read/only for now. The CPU clock can either use the SYS_PLL for > 1GHz frequencies or use a couple of div+mux from 1GHz/667MHz/24MHz source with 2 non-glitch muxes. Proper DVFS support will come in a second time. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> [narmstrong: fixed cpu clocks namings] Link: https://lkml.kernel.org/r/20190304131129.7762-3-narmstrong@baylibre.com
2019-04-01dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCINNeil Armstrong1-1/+0
When submitted v2 of the G12A AO-CLK IDs, the CLKID_AO_CTS_OSCIN was moved to the internal non-exported bindings, but this clock is necessary for the second AO-CEC-B module since it embeds the 32768Hz dual-divider clock generator unlike the AO-CEC-A module. Export it back to the public bindings. Fixes: be3d960b0aeb ("dt-bindings: clk: add G12A AO Clock and Reset Bindings") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20190321092010.14382-1-narmstrong@baylibre.com
2019-04-01dt-bindings: clock: axg-audio: unexpose controller inputsJerome Brunet1-0/+20
Remove the bindings ID of the clock input of the controller. These clocks are purely internal to the controller, exposing them was a mistake. Actually, these should not even be in the provider and have IDs to begin with. Unexpose these IDs before: * someone starts using them (even if there no valid reason to do so) * the actual clocks are removed. The fact that they exist is just the result of an ugly hack. This will be resolved in CCF when we can reference DT directly in parent table. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Maxime Jourdan <mjourdan@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190213095835.17448-1-jbrunet@baylibre.com
2019-03-29clk: meson: vid-pll-div: remove warning and return 0 on invalid configNeil Armstrong1-2/+2
The vid_pll_div is a programmable fractional divider, but vendor gives a limited of known configuration value and it's corresponding fraction. Thus when at reset value (0) or unknown value, we cannot determine the result rate. The initial behaviour was to print a warning, but the warning triggers at each boot and when the clock tree is refreshed. This patch moves the print to debug and returns 0 instead of the parent rate. Fixes: 72dbb8c94d0d ("clk: meson: Add vid_pll divider driver") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190327151348.27402-1-narmstrong@baylibre.com
2019-03-25clk: meson: pll: fix rounding and setting a rate that matches preciselyMartin Blumenstingl1-1/+1
Make meson_clk_pll_is_better() consider a rate that precisely matches the requested rate to be better than any previous rate (which was smaller than the current). Prior to commit 8eed1db1adec6a ("clk: meson: pll: update driver for the g12a") meson_clk_get_pll_settings() returned early (before calling meson_clk_pll_is_better()) if the rate from the current iteration matches the requested rate precisely. After this commit meson_clk_pll_is_better() is called unconditionally. This requires meson_clk_pll_is_better() to work with the case where "now == rate". This fixes a hang during boot on Meson8b / Odroid-C1 for me. Fixes: 8eed1db1adec6a ("clk: meson: pll: update driver for the g12a") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190324164327.22590-2-martin.blumenstingl@googlemail.com
2019-03-19clk: g12a-aoclk: re-export CLKID_AO_SAR_ADC_SEL clock idNeil Armstrong1-1/+0
When submitted v2 of the G12A AO-CLK IDs, the SAR_ADC_SEL ID was moved to the internal non-exported bindings, but this clock is necessary and mandatory for the SAR ADC bindings. Export it back to the public bindings. Fixes: be3d960b0aeb ("dt-bindings: clk: add G12A AO Clock and Reset Bindings") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190304105358.4987-1-narmstrong@baylibre.com
2019-03-19clk: meson-g12a: fix VPU clock parentsNeil Armstrong1-1/+1
First two VPU clock parents are wrong, fix it here. Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190313135503.3198-1-narmstrong@baylibre.com
2019-03-19clk: meson: g12a: fix VPU clock muxes maskMaxime Jourdan1-2/+2
There are 8 parents, use 0x7 Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller") Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190319082611.6215-1-mjourdan@baylibre.com
2019-03-19clk: meson-gxbb: round the vdec dividers to closestMaxime Jourdan1-0/+2
We want the video decoder clocks to always round to closest. While the muxes are already using CLK_MUX_ROUND_CLOSEST, the corresponding CLK_DIVIDER_ROUND_CLOSEST was forgotten for the dividers. Fix this by adding the flag to the two vdec dividers. Fixes: a565242eb9fc ("clk: meson: gxbb: add the video decoder clocks") Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190319102537.2043-1-mjourdan@baylibre.com
2019-02-13clk: meson: meson8b: fix the naming of the APB clocksMartin Blumenstingl2-14/+14
Fix a typo in the APB clock names by renaming them from "abp" to "apb". No functional changes. Fixes: a7d19b05ce817d ("clk: meson: meson8b: add the CPU clock post divider clocks") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190210222603.6404-2-martin.blumenstingl@googlemail.com
2019-02-13clk: meson: Add G12A AO Clock + Reset ControllerNeil Armstrong4-1/+491
Add the Amlogic G12A AO Clock and Reset controller driver handling generation of Always-On clocks : - AO Clocks and Reset for Always-On modules - 32K Generation for USB and CEC - SAR ADC controller clock Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190212162859.20743-3-narmstrong@baylibre.com
2019-02-04clk: meson: factorise meson64 peripheral clock controller driversJerome Brunet7-176/+313
The function used to probe the peripheral clock controller of the arm64 amlogic SoCs is mostly the same. We now have 3 of those controllers so it is time to factorize things a bit. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201145345.6795-5-jbrunet@baylibre.com
2019-02-04clk: meson: g12a: add peripheral clock controllerJian Hu5-2/+2594
Add the peripheral clock controller found in the g12a SoC family Signed-off-by: Jian Hu <jian.hu@amlogic.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201145345.6795-4-jbrunet@baylibre.com
2019-02-04clk: meson: pll: update driver for the g12aJerome Brunet2-59/+154
The g12a use fractional parameter of 17 useful bits. At the moment, this parameter in encoded using u16 value. Use this opportunity to switch all the pll to parameter to unsigned int. This should save us some annoying trouble shooting when and m and n field eventually grow as well. This patch also introduce pll multiplier range. On the g12a, the hifi and gp0 plls are able to lock as long as the following condition is met: 55 <= m/n <= 255. The param table describing this would be huge which is a waste of memory. Using ranges, we can save memory. Ranges also help find the best pll parameter significantly faster since we don't have to try all the possible settings. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [jbrunet: fixed fix pll settings calculation with arm32] Link: https://lkml.kernel.org/r/20190201145345.6795-2-jbrunet@baylibre.com
2019-02-02clk: meson: rework and clean drivers dependenciesJerome Brunet29-281/+465
Initially, the meson clock directory only hosted 2 controllers drivers, for meson8 and gxbb. At the time, both used the same set of clock drivers so managing the dependencies was not a big concern. Since this ancient time, entropy did its job, controllers with different requirement and specific clock drivers have been added. Unfortunately, we did not do a great job at managing the dependencies between the controllers and the different clock drivers. Some drivers, such as clk-phase or vid-pll-div, are compiled even if they are useless on the target (meson8). As we are adding new controllers, we need to be able to pick a driver w/o pulling the whole thing. The patch aims to clean things up by: * providing a dedicated CONFIG_ for each clock drivers * allowing clock drivers to be compiled as a modules, if possible * stating explicitly which drivers are required by each controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-02clk: meson: axg-audio does not require sysconJerome Brunet1-1/+1
The axg audio clock controller uses regmap mmio, not syscon. Fixes: 1cd50181750f ("clk: meson: axg: add the audio clock controller driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-4-jbrunet@baylibre.com
2019-01-18clk: meson: ao-clkc: claim clock controller input clocks from DTJerome Brunet4-14/+82
Instead of relying on a fixed names for the differents input clocks of the controller, get them through DT. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190116175435.4990-4-jbrunet@baylibre.com
2019-01-18clk: meson: axg: claim clock controller input clock from DTJerome Brunet1-8/+19
Instead of relying on a fixed name for the xtal clock, claim the controller input clock trough DT. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190116175435.4990-3-jbrunet@baylibre.com
2019-01-18clk: meson: gxbb: claim clock controller input clock from DTJerome Brunet1-13/+24
Instead of relying on a fixed name for the xtal clock, claim the controller input clock trough DT. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190116175435.4990-2-jbrunet@baylibre.com
2019-01-07clk: meson: meson8b: add the GPU clock treeMartin Blumenstingl2-1/+154
Add the GPU clock tree on Meson8, Meson8b and Meson8m2. The GPU clock tree on Meson8b and Meson8m2 is almost identical to the one one GXBB: - there's a glitch-free mux at HHI_MALI_CLK_CNTL[31] - there are two identical parents for this mux: mali_0 and mali_1, each with a gate, divider and mux - the parents of mali_0_sel and mali_1_sel are identical to GXBB except there's no GP0_PLL on these 32-bit SoCs Meson8 is different because it does not have the glitch-free mux. Instead if only has the mali_0 clock tree. The parents of mali_0_sel are identical to the ones on Meson8b and Meson8m2. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181208171247.22238-4-martin.blumenstingl@googlemail.com
2019-01-07clk: meson: meson8b: use a separate clock table for Meson8Martin Blumenstingl1-6/+197
The Meson8 SoC is slightly different compared to Meson8b and Meson8m2 because it does not have the glitch-free Mali GPU clock mux. For Meson8b and Meson8m2 there are currently no known differences. Add a separate clk_hw_onecell_data table for Meson8 so these differences can be implemented. For now meson8_hw_onecell_data is a clone of our existing meson8b_hw_onecell_data. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181208171247.22238-3-martin.blumenstingl@googlemail.com
2019-01-07clk: meson: axg-ao: add 32k generation subtreeJerome Brunet2-25/+163
Add the clock subtree generating the 32k clock in amlogic axg ao block. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181221160239.26265-6-jbrunet@baylibre.com
2019-01-07clk: meson: gxbb-ao: replace cec-32k with the dual dividerJerome Brunet4-262/+204
Replace the cec-32k clock of gxbb-ao with the simpler dual divider driver. The dual divider implements only the dividing part. All the other bits are now exposed using simple elements, such as gates and muxes Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181221160239.26265-5-jbrunet@baylibre.com
2019-01-07clk: meson: add dual divider clock driverJerome Brunet3-1/+150
Add the dual divider driver. This special divider make a weighted average between 2 dividers to reach fractional divider values. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181221160239.26265-4-jbrunet@baylibre.com
2019-01-07clk: meson: clean-up clock registrationJerome Brunet1-5/+10
Order, ids and size between the table of regmap clocks and the onecell data table could be different. Set regmap pointer in all the regmap clocks before starting the registration using the onecell data, to make sure we don't get into an incoherent situation. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181221160239.26265-3-jbrunet@baylibre.com
2018-12-15Merge branch 'clk-fixes' into clk-nextStephen Boyd2-0/+25
* clk-fixes: clk: qcom: qcs404: Fix gpll0_out_main parent clk: zynqmp: Off by one in zynqmp_is_valid_clock() clk: mmp: Off by one in mmp_clk_add() clk: mvebu: Off by one bugs in cp110_of_clk_get() arm64: dts: qcom: sdm845-mtp: Mark protected gcc clocks clk: zynqmp: handle fixed factor param query error clk: qcom: gcc: Fix board clock node name clk: meson: axg: mark fdiv2 and fdiv3 as critical clk: meson-gxbb: set fclk_div3 as CLK_IS_CRITICAL clk: fixed-factor: fix of_node_get-put imbalance
2018-12-13Merge tag 'meson-clk-4.21-2' of https://github.com/BayLibre/clk-meson into ↵Stephen Boyd7-71/+870
clk-meson Pull more meson clk driver updates from Neil Armstrong: - Fix GXL HDMI Pll fractional bits (from first round) - Add the Meson8/Meson8b video clocks - Add clk-input helper and use it for axg-audio clock driver * tag 'meson-clk-4.21-2' of https://github.com/BayLibre/clk-meson: clk: meson: axg-audio: use the clk input helper function clk: meson: add clk-input helper function clk: meson: meson8b: add the read-only video clock trees clk: meson: meson8b: add the fractional divider for vid_pll_dco clk: meson: meson8b: fix the offset of vid_pll_dco's N value clk: meson: Fix GXL HDMI PLL fractional bits width
2018-12-11clk: meson: axg-audio: use the clk input helper functionJerome Brunet1-59/+24
Rework the axg audio clock controller to use the new clk-input helper function. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed pclk input clock name to axg_audio_pclk] Link: http://lkml.kernel.org/r/20181204165819.21541-3-jbrunet@baylibre.com
2018-12-05clk: meson: add clk-input helper functionJerome Brunet3-0/+50
Add the clock input helper function. Several amlogic clock controllers will now be registering bypass clock input. Instead of copying this code in every of them, let's make an helper function for it Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed up to apply on Makefile and clkc.h] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181204165819.21541-2-jbrunet@baylibre.com
2018-12-04clk: meson: Mark some things staticStephen Boyd2-6/+6
These are missing 'static' so sparse complains: drivers/clk/meson/vid-pll-div.c:58:26: warning: symbol '_get_table_val' was not declared. Should it be static? drivers/clk/meson/gxbb.c:1585:12: warning: symbol 'gxbb_vid_pll_parent_names' was not declared. Should it be static? drivers/clk/meson/gxbb.c:1620:12: warning: symbol 'gxbb_vclk_parent_names' was not declared. Should it be static? drivers/clk/meson/gxbb.c:1980:12: warning: symbol 'gxbb_cts_parent_names' was not declared. Should it be static? drivers/clk/meson/gxbb.c:2036:12: warning: symbol 'gxbb_cts_hdmi_tx_parent_names' was not declared. Should it be static? Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-03clk: meson: meson8b: add the read-only video clock treesMartin Blumenstingl2-10/+782
Add all clocks to give us the final video clocks within the Meson8, Meson8b and Meson8m2 SoCs. The final video clocks are: - cts_enct - cts_encl - cts_encp - cts_enci - cts_vdac0 - hdmi_tx_pixel - hdmi_sys Add multiple clocks in between which are needed to implement these clocks: - Opposed to GXBB there is no pre-multiplier for the PLL input. The assumption here is that the multiplier is required to achieve the HDMI 2.0 clock rates (which are up to twice the rate of the HDMI 1.4 rates). - The main PLL is called "HDMI PLL" or "HPLL" in the datasheet. Rename our existing "vid_pll_dco" to "hdmi_pll_dco". The actual VID_PLL clock also exists further down the tree. - Rename the existing "vid_pll" clock (which is the OD divider at HHI_VID_PLL_CNTL[17:16]) to "hdmi_pll_lvds_out" to match the naming from the datasheet. - Add the second OD divider called "hdmi_pll_hdmi_out" at HHI_VID_PLL_CNTL[19:18]. - Add the "vid_pll_in_sel" which can choose between "hdmi_pll_dco" and another parent. However, the second parent is not use on Amlogic's 3.10 kernel for HDMI or CVBS output so just leave a TODO in the code. - Add the "vid_pll_in_en" which is located after "vid_pll_in_sel" according to the datasheet. - Add "vid_pll_pre_div" which is used for divide-by-5 and divide-by-6 in Amlogic's 3.10 kernel sources. - Add "vid_pll_post_div" which divides the output of "vid_pll_pre_div" further down. The Amlogic 3.10 kernel configures this as divide-by-2 with "vid_pll_pre_div" being configured as divide-by-5 to achieve a total divider of 10. - Add the real "vid_pll" clock which selects between "vid_pll_pre_div", "vid_pll_post_div" and a third "vid_pll_pre_div_mult7_div2" (which is "vid_pll_pre_div" divided by 3.5). The latter is not supported yet because it's not used in Amlogic's 3.10 kernel. The "vid_pll" clock rate can also be measured by clkmsr to check whether this implementation is correct. - Add "vid_pll_final_div" which is a post-divider for "vid_pll" and it's used as input for "vclk" and "vclk2" - Add the two symmetric "vclk" and "vclk" clock trees, each with a divide-by-1, divide-by-2, divide-by-4, divide-by-6 and divide-by-12 clock and a divider for each clock. - Add the "cts_enct", "cts_encp" and "hdmi_tx_pixel" clocks which each have their own gate and can select between any of the five "vclk" dividers. - Add the "cts_encl" and "cts_vdac0" clocks which each have their own gate and can select between any of the five "vclk2" dividers. The "hdmi_sys" clock is a different than these video clocks. It takes "xtal" as input (there are three more but unknown parents). Add this clock as well as it's used by the HDMI controller. Amlogic's 3.10 kernel always configures this as "xtal divided by 1", so we can ignore the other parents for now. This was tested on Meson8b and Meson8m2 boards by comparing the common clock framework output with the clock measurer output. The following video modes were first set in u-boot (by running "video dev open $mode") before booting Linux: 4K2K30HZ (only supported by Meson8m2, not tested on Meson8b): - vid_pll: 297000000Hz - cts_encp: 297000000Hz - hdmi_tx_pixel: 297000000Hz 1080P: - vid_pll: 148500000Hz - cts_encp: 148500000Hz - hdmi_tx_pixel: 148500000Hz 720P: - vid_pll: 148500000Hz - cts_encp: 148500000Hz - hdmi_tx_pixel: 74250000Hz 480P: - vid_pll: 216000000Hz - cts_encp: 54000000Hz - hdmi_tx_pixel: 27000000Hz Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181202214220.7715-4-martin.blumenstingl@googlemail.com
2018-12-03clk: meson: meson8b: add the fractional divider for vid_pll_dcoMartin Blumenstingl2-0/+6
This "vid_pll_dco" (which should be named HDMI_PLL or - as the datasheet calls it - HPLL) has a 12-bit wide fractional parameter at HHI_VID_PLL_CNTL2[11:0]. Add this so we correctly calculate the rate of this PLL when u-boot is configured for a video mode which uses this fractional parameter. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181202214220.7715-3-martin.blumenstingl@googlemail.com
2018-12-03clk: meson: meson8b: fix the offset of vid_pll_dco's N valueMartin Blumenstingl1-1/+1
Unlike the other PLLs on Meson8b the N value "vid_pll_dco" (a better name would be hdmi_pll_dco or - as the datasheet calls it - HPLL) is located at HHI_VID_PLL_CNTL[14:10] instead of [13:9]. This results in an incorrect calculation of the rate of this PLL because the value seen by the kernel is double the actual N (divider) value. Update the offset of the N value to fix the calculation of the PLL rate. Fixes: 28b9fcd016126e ("clk: meson8b: Add support for Meson8b clocks") Reported-by: Jianxin Pan <jianxin.pan@amlogic.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181202214220.7715-2-martin.blumenstingl@googlemail.com
2018-11-27clk: meson: Fix GXL HDMI PLL fractional bits widthNeil Armstrong1-1/+7
The GXL Documentation specifies 12 bits for the Fractional bit field, bit the last bits have a different purpose that we cannot handle right now, so update the bitwidth to have correct fractional calculations. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: added comment on GXL HHI_HDMI_PLL_CNTL register shift] Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lkml.kernel.org/r/20181121111922.1277-1-narmstrong@baylibre.com
2018-11-23clk: meson: meson8b: add the CPU clock post divider clocksMartin Blumenstingl2-1/+256
There are four CPU clock post dividers: - ABP - PERIPH (used for the ARM global timer and ARM TWD timer) - AXI - L2 DRAM Each of these clocks consists of two clocks: - a mux to select between "cpu_clk" divided by 2, 3, 4, 5, 6, 7 or 8 - a "_clk_dis" gate. The public S805 datasheet states that this should be set to 1 to disable the clock, the default value is 0. There is also a hint that these are "just in case" bits which only exist in case the corresponding mux implementation does not allow glitch-free parent changes (the muxes are designed in a way that the clock can stay enabled when changing the mux). It's still good practise to describe this clock even if we're not supposed to modify it. Thus this uses the read-only gate ops. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181122214017.25643-5-martin.blumenstingl@googlemail.com
2018-11-23clk: meson: meson8b: rename cpu_div2/cpu_div3 to cpu_in_div2/cpu_in_div3Martin Blumenstingl2-12/+12
The "cpu_div2" and "cpu_div3" take "cpu_in" as input and divide that by 2 or 3. The clock controller can also generate various CPU clock post-dividers (2, 3, 4, 5, 6, 7, 8) which are derived from "cpu_clk". When adding support for these post-dividers our clock naming could be misleading as we have "cpu_div2" as well as "cpu_clk_div2". Rename the existing "cpu_in" dividers so the name of the divider's parent is part of the divider clock's name. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181122214017.25643-4-martin.blumenstingl@googlemail.com
2018-11-23clk: meson: clk-regmap: add read-only gate opsMartin Blumenstingl2-0/+6
Some of the gate clocks are described as "just in case" bits in the datasheet. Examples are the ABP, PERIPH, AXI and L2 DRAM clocks on Meson8b. The datasheet suggests that these bits are not touched. The full explanation is: "Set to 1 to manually disable the [...] clock when changing the mux selection. Typically this bit is set to 0 since the clock muxes can switch without glitches.". This adds new read-only ops for gate clocks so we can describe these clocks in our clock controller drivers while ensuring that we can't accidentally modify the registers. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181122214017.25643-3-martin.blumenstingl@googlemail.com
2018-11-23clk: meson: meson8b: allow changing the CPU clock treeMartin Blumenstingl1-6/+6
Currently all clocks in the CPU clock tree are marked as read-only (using the corresponding _ro_ clk_ops). This was correct since changing the clock tree could cause the system to lock up. Switch all clocks to their corresponding clk_ops variant which is not read-only to allow changing the CPU clock tree since the bug which locked up the system is now fixed (by switching the CPU clock temporary to run off XTAL while changing the CPU clock tree). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181115224048.13511-7-martin.blumenstingl@googlemail.com
2018-11-23clk: meson: meson8b: run from the XTAL when changing the CPU frequencyMartin Blumenstingl1-0/+63
Changing the CPU clock requires changing various clocks including the SYS PLL. The existing meson clk-pll and clk-regmap drivers can change all of the relevant clocks already. However, changing for exampe the SYS PLL is problematic because as long as the CPU is running off a clock derived from SYS PLL changing the latter results in a full system lockup. Fix this system lockup by switching the CPU clock to run off the XTAL while we are changing the any of the clocks in the CPU clock tree. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181115224048.13511-6-martin.blumenstingl@googlemail.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-12 02:18:24 +0300