summaryrefslogtreecommitdiff
path: root/drivers/clk/meson/meson8b.h
AgeCommit message (Collapse)AuthorFilesLines
2019-02-13clk: meson: meson8b: fix the naming of the APB clocksMartin Blumenstingl1-1/+1
Fix a typo in the APB clock names by renaming them from "abp" to "apb". No functional changes. Fixes: a7d19b05ce817d ("clk: meson: meson8b: add the CPU clock post divider clocks") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190210222603.6404-2-martin.blumenstingl@googlemail.com
2019-01-07clk: meson: meson8b: add the GPU clock treeMartin Blumenstingl1-1/+8
Add the GPU clock tree on Meson8, Meson8b and Meson8m2. The GPU clock tree on Meson8b and Meson8m2 is almost identical to the one one GXBB: - there's a glitch-free mux at HHI_MALI_CLK_CNTL[31] - there are two identical parents for this mux: mali_0 and mali_1, each with a gate, divider and mux - the parents of mali_0_sel and mali_1_sel are identical to GXBB except there's no GP0_PLL on these 32-bit SoCs Meson8 is different because it does not have the glitch-free mux. Instead if only has the mali_0 clock tree. The parents of mali_0_sel are identical to the ones on Meson8b and Meson8m2. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181208171247.22238-4-martin.blumenstingl@googlemail.com
2018-12-03clk: meson: meson8b: add the read-only video clock treesMartin Blumenstingl1-2/+51
Add all clocks to give us the final video clocks within the Meson8, Meson8b and Meson8m2 SoCs. The final video clocks are: - cts_enct - cts_encl - cts_encp - cts_enci - cts_vdac0 - hdmi_tx_pixel - hdmi_sys Add multiple clocks in between which are needed to implement these clocks: - Opposed to GXBB there is no pre-multiplier for the PLL input. The assumption here is that the multiplier is required to achieve the HDMI 2.0 clock rates (which are up to twice the rate of the HDMI 1.4 rates). - The main PLL is called "HDMI PLL" or "HPLL" in the datasheet. Rename our existing "vid_pll_dco" to "hdmi_pll_dco". The actual VID_PLL clock also exists further down the tree. - Rename the existing "vid_pll" clock (which is the OD divider at HHI_VID_PLL_CNTL[17:16]) to "hdmi_pll_lvds_out" to match the naming from the datasheet. - Add the second OD divider called "hdmi_pll_hdmi_out" at HHI_VID_PLL_CNTL[19:18]. - Add the "vid_pll_in_sel" which can choose between "hdmi_pll_dco" and another parent. However, the second parent is not use on Amlogic's 3.10 kernel for HDMI or CVBS output so just leave a TODO in the code. - Add the "vid_pll_in_en" which is located after "vid_pll_in_sel" according to the datasheet. - Add "vid_pll_pre_div" which is used for divide-by-5 and divide-by-6 in Amlogic's 3.10 kernel sources. - Add "vid_pll_post_div" which divides the output of "vid_pll_pre_div" further down. The Amlogic 3.10 kernel configures this as divide-by-2 with "vid_pll_pre_div" being configured as divide-by-5 to achieve a total divider of 10. - Add the real "vid_pll" clock which selects between "vid_pll_pre_div", "vid_pll_post_div" and a third "vid_pll_pre_div_mult7_div2" (which is "vid_pll_pre_div" divided by 3.5). The latter is not supported yet because it's not used in Amlogic's 3.10 kernel. The "vid_pll" clock rate can also be measured by clkmsr to check whether this implementation is correct. - Add "vid_pll_final_div" which is a post-divider for "vid_pll" and it's used as input for "vclk" and "vclk2" - Add the two symmetric "vclk" and "vclk" clock trees, each with a divide-by-1, divide-by-2, divide-by-4, divide-by-6 and divide-by-12 clock and a divider for each clock. - Add the "cts_enct", "cts_encp" and "hdmi_tx_pixel" clocks which each have their own gate and can select between any of the five "vclk" dividers. - Add the "cts_encl" and "cts_vdac0" clocks which each have their own gate and can select between any of the five "vclk2" dividers. The "hdmi_sys" clock is a different than these video clocks. It takes "xtal" as input (there are three more but unknown parents). Add this clock as well as it's used by the HDMI controller. Amlogic's 3.10 kernel always configures this as "xtal divided by 1", so we can ignore the other parents for now. This was tested on Meson8b and Meson8m2 boards by comparing the common clock framework output with the clock measurer output. The following video modes were first set in u-boot (by running "video dev open $mode") before booting Linux: 4K2K30HZ (only supported by Meson8m2, not tested on Meson8b): - vid_pll: 297000000Hz - cts_encp: 297000000Hz - hdmi_tx_pixel: 297000000Hz 1080P: - vid_pll: 148500000Hz - cts_encp: 148500000Hz - hdmi_tx_pixel: 148500000Hz 720P: - vid_pll: 148500000Hz - cts_encp: 148500000Hz - hdmi_tx_pixel: 74250000Hz 480P: - vid_pll: 216000000Hz - cts_encp: 54000000Hz - hdmi_tx_pixel: 27000000Hz Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181202214220.7715-4-martin.blumenstingl@googlemail.com
2018-12-03clk: meson: meson8b: add the fractional divider for vid_pll_dcoMartin Blumenstingl1-0/+1
This "vid_pll_dco" (which should be named HDMI_PLL or - as the datasheet calls it - HPLL) has a 12-bit wide fractional parameter at HHI_VID_PLL_CNTL2[11:0]. Add this so we correctly calculate the rate of this PLL when u-boot is configured for a video mode which uses this fractional parameter. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181202214220.7715-3-martin.blumenstingl@googlemail.com
2018-11-23clk: meson: meson8b: add the CPU clock post divider clocksMartin Blumenstingl1-1/+12
There are four CPU clock post dividers: - ABP - PERIPH (used for the ARM global timer and ARM TWD timer) - AXI - L2 DRAM Each of these clocks consists of two clocks: - a mux to select between "cpu_clk" divided by 2, 3, 4, 5, 6, 7 or 8 - a "_clk_dis" gate. The public S805 datasheet states that this should be set to 1 to disable the clock, the default value is 0. There is also a hint that these are "just in case" bits which only exist in case the corresponding mux implementation does not allow glitch-free parent changes (the muxes are designed in a way that the clock can stay enabled when changing the mux). It's still good practise to describe this clock even if we're not supposed to modify it. Thus this uses the read-only gate ops. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181122214017.25643-5-martin.blumenstingl@googlemail.com
2018-11-23clk: meson: meson8b: rename cpu_div2/cpu_div3 to cpu_in_div2/cpu_in_div3Martin Blumenstingl1-2/+2
The "cpu_div2" and "cpu_div3" take "cpu_in" as input and divide that by 2 or 3. The clock controller can also generate various CPU clock post-dividers (2, 3, 4, 5, 6, 7, 8) which are derived from "cpu_clk". When adding support for these post-dividers our clock naming could be misleading as we have "cpu_div2" as well as "cpu_clk_div2". Rename the existing "cpu_in" dividers so the name of the divider's parent is part of the divider clock's name. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181122214017.25643-4-martin.blumenstingl@googlemail.com
2018-09-26clk: meson: clk-pll: remove od parametersJerome Brunet1-1/+4
Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-18clk: meson: use SPDX license identifiers consistentlyJerome Brunet1-12/+1
Replace every license notices in drivers/clk/meson by SPDX license identifiers, as described in license-rules.rst Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-15clk: meson: meson8b: add support for the NAND clocksMartin Blumenstingl1-1/+4
This adds the NAND clocks (from the HHI_NAND_CLK_CNTL register) to the Meson8b clock driver. There are three NAND clocks: a gate which enables or disables the NAND clock, a mux and a divider (which divides the mux output). Unfortunately the public S805 datasheet does not document the mux parents. However, the vendor kernel has a few hints for us which allows us to make an educated guess about the clock parents. To do this we need to have a look at set_nand_core_clk() from the vendor's NAND driver (see [0]): - XTAL = (4<<9) | (1<<8) | 0 - 160MHz = (0<<9) | (1<<8) | 3) - 182MHz = (3<<9) | (1<<8) | 1) - 212MHz = (1<<9) | (1<<8) | 3) - 255MHz = (2<<9) | (1<<8) | 1) While there is a comment for the XTAL parent (which indicates that it should only be used for debugging) we have to do a bit of math for the other parents: target_freq * divider = rate of parent clock Bit 8 above is the enable bit, so we can ignore it here. Bits 11:9 are the mux index and bits 6:0 are the 0-based divider (so we need to add 1). This gives us: - mux 0 (160MHz * 4) = fclk_div4 (actual rate = 637.5MHz, off by 2.5MHz) - mux 1 (212MHz * 4) = fclk_div3 (actual rate = 850MHz, off by 2MHz) - mux 2 (255MHz * 2) = fclk_div5 (matches exactly 510MHz) - mux 3 (182MHz * 2) = fclk_div7 (actual rate = 346.3MHz, off by 0.3MHz) [0] https://github.com/khadas/linux/blob/9587681285cb/drivers/amlogic/amlnf/dev/amlnf_ctrl.c#L314 Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-03-13clk: meson: add fdiv clock gatesJerome Brunet1-1/+6
Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: add mpll pre-dividerJerome Brunet1-1/+2
mpll clocks parent can actually be divided by 1 or 2. So far, this divider has always been set to 1, so the calculation was correct. Now that we know it exists, model the tree correctly. If we ever get a platform where the divider is different, we won't get into trouble Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: rework meson8b cpu clockJerome Brunet1-1/+6
Instead of migrating meson cpu_clk to clk_regmap, like the other meson clock drivers, we take advantage of the massive rework to get rid of it completely, and solve (the first part) of the related FIXME notice. As pointed out in the code comments, the cpu_clk should be modeled with dividers and muxes it is made of, instead of one big composite clock. The cpu_clk was not working correctly to enable dvfs on meson8b. It hangs quite often when changing the cpu clock rate. This new implementation, based on simple elements improves the situation but the platform will still hang from time to time. This is not acceptable so, until we can make the mechanism around the cpu clock stable, the cpu clock subtree has been put in read-only mode, preventing any change of the cpu clock The notifier and read-write operation will be added back when we have a solution to the problem. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: split divider and gate part of mpllJerome Brunet1-1/+5
The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-08-04clk: meson: meson8b: register the built-in reset controllerMartin Blumenstingl1-1/+8
The clock controller also includes some reset lines. This patch implements a reset controller to assert and de-assert these resets. The reset controller itself is registered early (through CLK_OF_DECLARE_DRIVER) because it is needed very early in the boot process (to start the secondary CPU cores). According to the public S805 datasheet there are two more reset bits in the HHI_SYS_CPU_CLK_CNTL0 register, which are not implemented by this patch (as these seem to be unused in Amlogic's vendor Linux kernel sources and their u-boot tree): - bit 15: GEN_DIV_SOFT_RESET - bit 14: SOFT_RESET All information was taken from the public S805 Datasheet and Amlogic's vendor GPL kernel sources. This patch is based on an earlier version submitted by Carlo Caione. Suggested-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-08-04clk: meson8b: expose every clock in the bindingsJerome Brunet1-99/+4
Expose all clocks which maybe used as DT bindings Only clock ids internal the controller remain un-exposed (none on this particular controller at the moment) Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-06-12clk: meson8b: export the ethernet gate clockMartin Blumenstingl1-1/+1
Export the ethernet gate clock to the dt-bindings. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-06-12clk: meson8b: export the USB clocksMartin Blumenstingl1-5/+5
Export the USB related clocks (for the USB controller and the USB2 PHYs) so they can be used in the dt-bindings. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-06-12clk: meson8b: export the gate clock for the HW random number generatorMartin Blumenstingl1-1/+1
This exports the clock so it can be used in the dt-bindings. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-06-12clk: meson8b: export the SDIO clockMartin Blumenstingl1-1/+1
Export the SDIO clock so it can be used in the dt-bindings. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-06-12clk: meson8b: export the SAR ADC clocksMartin Blumenstingl1-2/+2
Export the clocks for the SAR ADC so they can be used in the dt-bindings. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-03-27clk: meson8b: add the mplls clocks 0, 1 and 2Jerome Brunet1-1/+19
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20170309104154.28295-8-jbrunet@baylibre.com
2016-09-02meson: clk: Add support for clock gatesAlexander Müller1-0/+5
This patch adds support for the meson8b clock gates. Most of them are disabled by Amlogic U-Boot, but need to be enabled for ethernet, USB and many other components. Signed-off-by: Alexander Müller <serveralex@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1472319654-59048-7-git-send-email-serveralex@gmail.com
2016-09-02clk: meson: Copy meson8b CLKID defines to private header fileAlexander Müller1-0/+107
Only expose future CLKID constants if necessary. This patch removes CLK_NR_CLKS from the DT bindings but leaves all previously defined CLKIDs there to keep backward compatibility. Signed-off-by: Alexander Müller <serveralex@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1472319654-59048-5-git-send-email-serveralex@gmail.com
2016-09-02meson: clk: Rename register names according to Amlogic datasheetAlexander Müller1-6/+5
Signed-off-by: Alexander Müller <serveralex@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1472319654-59048-4-git-send-email-serveralex@gmail.com
2016-09-02meson: clk: Move register definitions to meson8b.hAlexander Müller1-0/+40
Move the register definitions into a separate header file to reflect the gxbb implementation. Signed-off-by: Alexander Müller <serveralex@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1472319654-59048-3-git-send-email-serveralex@gmail.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-05 11:32:05 +0300