summaryrefslogtreecommitdiff
path: root/drivers/clk/imx
AgeCommit message (Collapse)AuthorFilesLines
2019-11-04clk: imx: imx8mq: fix sys3_pll_out_selsPeng Fan1-2/+2
It is not correct that sys3_pll_out use sys2_pll1_ref_sel as parent. According to the current imx_clk_sccg_pll design, it uses both bypass1/2, however set bypass2 as 1 is not correct, because it will make sys[x]_pll_out use wrong parent and might access wrong registers. So correct bypass2 to 0 and fix sys3_pll_out_sels. Fixes: e9dda4af685f ("clk: imx: Refactor entire sccg pll clk") Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28clk: imx7ulp: do not export out IMX7ULP_CLK_MIPI_PLL clockFancy Fang1-2/+1
The mipi pll clock comes from the MIPI PHY PLL output, so it should not be a fixed clock. MIPI PHY PLL is in the MIPI DSI space, and it is used as the bit clock for transferring the pixel data out and its output clock is configured according to the display mode. So it should be used only for MIPI DSI and not be exported out for other usages. Signed-off-by: Fancy Fang <chen.fang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARMLeonard Crestez2-2/+2
During cpu frequency switching the main "CLK_ARM" is reparented to an intermediate "step" clock. On imx8mm and imx8mn the 24M oscillator is used for this purpose but it is extremely slow, increasing wakeup latencies to the point that i2c transactions can timeout and system becomes unresponsive. Fix by switching the "step" clk to SYS_PLL1_800M, matching the behavior of imx8m cpufreq drivers in imx vendor tree. This bug was not immediately apparent because upstream arm64 defconfig uses the "performance" governor by default so no cpufreq transitions happen. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver") Cc: stable@vger.kernel.org Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lkml.kernel.org/r/f5d2b9c53f1ed5ccb1dd3c6624f56759d92e1689.1571771777.git.leonard.crestez@nxp.com Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-28clk: imx: imx6ul: use imx_obtain_fixed_clk_hw to simplify codePeng Fan1-4/+4
imx_obtain_fixed_clk_hw could be used to simplify code to replace __clk_get_hw(of_clk_get_by_name(node, "name")) Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28clk: imx: imx6sx: use imx_obtain_fixed_clk_hw to simplify codePeng Fan1-6/+6
imx_obtain_fixed_clk_hw could be used to simplify code to replace __clk_get_hw(of_clk_get_by_name(node, "name")) Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28clk: imx: imx6sll: use imx_obtain_fixed_clk_hw to simplify codePeng Fan1-4/+4
imx_obtain_fixed_clk_hw could be used to simplify code to replace __clk_get_hw(of_clk_get_by_name(node, "name")) Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28clk: imx: imx7d: use imx_obtain_fixed_clk_hw to simplify codePeng Fan1-2/+2
imx_obtain_fixed_clk_hw could be used to simplify code to replace __clk_get_hw(of_clk_get_by_name(node, "name")) Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-26clk: imx7ulp: Correct DDR clock mux optionsAnson Huang1-2/+2
In the latest reference manual Rev.0,06/2019, the DDR clock mux is extended to 2 bits, and the clock options are also changed, correct them accordingly. Fixes: b1260067ac3d ("clk: imx: add imx7ulp clk driver") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-26clk: imx7ulp: Correct system clock source option #7Anson Huang1-1/+1
In the latest reference manual Rev.0,06/2019, the SCS's option #7 is no longer from upll, it is reserved, update clock driver accordingly. Fixes: b1260067ac3d ("clk: imx: add imx7ulp clk driver") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25clk: imx: imx8mq: mark sys1/2_pll as fixed clockPeng Fan1-6/+2
According Architecture definition guide, SYS1_PLL is fixed at 800MHz, SYS2_PLL is fixed at 1000MHz, so let's use imx_clk_fixed to register the clocks and drop code that could change the rate. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25clk: imx: imx8mn: mark sys_pll1/2 as fixed clockPeng Fan1-26/+20
According Architecture definition guide, SYS_PLL1 is fixed at 800MHz, SYS_PLL2 is fixed at 1000MHz, so let's use imx_clk_fixed to register the clocks and drop code that could change the rate. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25clk: imx: imx8mm: mark sys_pll1/2 as fixed clockPeng Fan1-26/+20
According Architecture definition guide, SYS_PLL1 is fixed at 800MHz, SYS_PLL2 is fixed at 1000MHz, so let's use imx_clk_fixed to register the clocks and drop code that could change the rate. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25clk: imx8mn: Define gates for pll1/2 fixed dividersLeonard Crestez1-19/+38
On imx8mn there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2 each with their own gate. Only one of these gates (the one "dividing" by one) is currently defined and it's incorrectly set as the parent of all the fixed-factor dividers. Add the other 8 gates to the clock tree between sys_pll1/2_bypass and the fixed dividers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25clk: imx8mm: Define gates for pll1/2 fixed dividersLeonard Crestez1-19/+38
On imx8mm there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2 each with their own gate. Only one of these gates (the one "dividing" by one) is currently defined and it's incorrectly set as the parent of all the fixed-factor dividers. Add the other 8 gates to the clock tree between sys_pll1/2_bypass and the fixed dividers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25clk: imx8mq: Define gates for pll1/2 fixed dividersLeonard Crestez1-20/+41
On imx8mq there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2 each with their own gate but these gates are not currently defined in the clock tree. Add them between sys1/2_pll_out and the fixed dividers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-16clk: imx: imx8mn: drop unused pll enumPeng Fan1-14/+0
The PLL enum definition is not used, so drop it. Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1571122989-29361-1-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-14clk: imx: clk-pll14xx: Make two variables staticYueHaibing1-2/+2
Fix sparse warnings: drivers/clk/imx/clk-pll14xx.c:44:37: warning: symbol 'imx_pll1416x_tbl' was not declared. Should it be static? drivers/clk/imx/clk-pll14xx.c:57:37: warning: symbol 'imx_pll1443x_tbl' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-14clk: imx8mq: Add VIDEO2_PLL clockLaurentiu Palcu1-0/+4
This clock is needed by DCSS when high resolutions are used. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com> CC: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06clk: imx8mn: Use common 1443X/1416X PLL clock structureAnson Huang2-79/+12
Use common 1413X/1416X PLL clock structure to save a lot of duplicated code on i.MX8MN clock driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06clk: imx8mm: Move 1443X/1416X PLL clock structure to common placeAnson Huang3-77/+43
Many i.MX8M SoCs use same 1443X/1416X PLL, such as i.MX8MM, i.MX8MN and later i.MX8M SoCs, moving these PLL definitions to pll14xx driver can save a lot of duplicated code on each platform. Meanwhile, no need to define PLL clock structure for every module which uses same type of PLL, e.g., audio/video/dram use 1443X PLL, arm/gpu/vpu/sys use 1416X PLL, define 2 PLL clock structure for each group is enough. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06clk: imx: pll14xx: Fix quick switch of S/K parameterLeonard Crestez1-32/+8
The PLL14xx on imx8m can change the S and K parameter without requiring a reset and relock of the whole PLL. Fix clk_pll144xx_mp_change register reading and use it for pll1443 as well since no reset+relock is required on K changes either. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-09-18clk: imx: imx8mn: fix pll mux bitPeng Fan1-22/+10
pll BYPASS bit should be kept inside pll driver for glitchless freq setting following spec. If exposing the bit, that means pll driver and clk driver has two paths to touch this bit, which is wrong. So use EXT_BYPASS bit here. And drop uneeded set parent, because EXT_BYPASS default is 0. Suggested-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-5-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-18clk: imx: imx8mm: fix pll mux bitPeng Fan1-22/+10
pll BYPASS bit should be kept inside pll driver for glitchless freq setting following spec. If exposing the bit, that means pll driver and clk driver has two paths to touch this bit, which is wrong. So use EXT_BYPASS bit here. And drop uneeded set parent, because EXT_BYPASS default is 0. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Suggested-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-4-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-18clk: imx: clk-pll14xx: unbypass PLL by defaultPeng Fan1-0/+5
When registering the PLL, unbypass the PLL. The PLL has two bypass control bit, BYPASS and EXT_BYPASS. we will expose EXT_BYPASS to clk driver for mux usage, and keep BYPASS inside pll14xx usage. The PLL has a restriction that when M/P change, need to RESET/BYPASS pll to avoid glitch, so we could not expose BYPASS. To make it easy for clk driver usage, unbypass PLL which does not hurt current function. Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-3-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-18clk: imx: pll14xx: avoid glitch when set ratePeng Fan1-1/+21
According to PLL1443XA and PLL1416X spec, "When BYPASS is 0 and RESETB is changed from 0 to 1, FOUT starts to output unstable clock until lock time passes. PLL1416X/PLL1443XA may generate a glitch at FOUT." So set BYPASS when RESETB is changed from 0 to 1 to avoid glitch. In the end of set rate, BYPASS will be cleared. When prepare clock, also need to take care to avoid glitch. So we also follow Spec to set BYPASS before RESETB changed from 0 to 1. And add a check if the RESETB is already 0, directly return 0; Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-2-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-24clk: imx: imx8mn: fix audio pll settingPeng Fan1-2/+2
The AUDIO PLL max support 650M, so the original clk settings violate spec. This patch makes the output 786432000 -> 393216000, and 722534400 -> 361267200 to aligned with NXP vendor kernel without any impact on audio functionality and go within 650MHz PLL limit. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mn: Add necessary frequency support for ARM PLL tableAnson Huang1-0/+2
i.MX8MN supports CPU running at 1.5GHz/1.4GHz/1.2GHz, add missing frequency for ARM PLL table. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mn: Add missing rate_count assignment for each PLL structureAnson Huang1-0/+7
Add .rate_count assignment which is necessary for searching required PLL rate from the each PLL table. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mn: fix int pll clk gatePeng Fan1-6/+6
To Frac pll, the gate shift is 13, however to Int PLL the gate shift is 11. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mn: Add GIC clockLeonard Crestez1-0/+5
This is enabled by default but if it's not explicitly defined and marked as critical then its parent might get turned off. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mn: Fix incorrect parentsLeonard Crestez1-7/+7
* Replace to audio_pll2_clk with audio_pll2_out * Replace sys3_pll2_out with sys_pll3_out * Replace sys1_pll_40m with sys_pll1_40m * qspi parent[2] is sys_pll2_333m not sys_pll1_800m Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mm: Fix incorrect parentsLeonard Crestez1-4/+4
* There is no video_pll2 on imx8mm, replace with dummy * Replace reference to sys_pll3_clk with sys_pll3_out * qspi parent[2] is sys_pll2_333m not sys_pll1_800m Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mq: Fix sys3 pll referencesLeonard Crestez1-56/+56
The "sys3_pll2_out" CLK was removed in refactoring so all references need to be updated to "sys3_pll_out" Fixes: e9dda4af685f ("clk: imx: Refactor entire sccg pll clk") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12clk: imx8mq: Unregister clks when of_clk_add_provider failedAnson Huang1-1/+9
When of_clk_add_provider failed, all clks should be unregistered. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12clk: imx8mm: Unregister clks when of_clk_add_provider failedAnson Huang1-1/+6
When of_clk_add_provider failed, all clks should be unregistered. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mq: Mark AHB clock as criticalAbel Vesa1-1/+2
Initially, the TMU_ROOT clock was marked as critical, which automatically made the AHB clock to stay always on. Since the TMU_ROOT clock is not marked as critical anymore, following commit: "clk: imx8mq: Remove CLK_IS_CRITICAL flag for IMX8MQ_CLK_TMU_ROOT" all the clocks that derive from ipg_root clock (and implicitly ahb clock) would also have to enable, along with their own gate, the AHB clock. But considering that AHB is actually a bus that has to be always on, we mark it as critical in the clock provider driver and then all the clocks that derive from it can be controlled through the dedicated per IP gate which follows after the ipg_root clock. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Tested-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mn: Keep uart clocks on for early consoleAnson Huang1-0/+10
Call imx_register_uart_clocks() API to keep uart clocks enabled when earlyprintk or earlycon is active. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx: Remove unused function statementAnson Huang1-1/+0
imx_register_uart_clocks_hws() function is NOT implemented at all, remove it. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx7ulp: Make sure earlycon's clock is enabledAnson Huang1-0/+31
Earlycon's clock could be disabled during kernel boot up, if earlycon is enabled and its clock is gated, then kernel boot up will fail. Make sure earlycon's clock is enabled during kernel boot up. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: Switch to platform driverAbel Vesa1-21/+36
There is no strong reason for this to use CLK_OF_DECLARE instead of being a platform driver. Plus, this will now be aligned with the other i.MX8M clock drivers which are platform drivers. In order to make the clock provider a platform driver all the data and code needs to be outside of .init section. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx: imx8mm: fix audio pll settingPeng Fan1-2/+2
The AUDIO PLL max support 650M, so the original clk settings violate spec. This patch makes the output 786432000 -> 393216000, and 722534400 -> 361267200 to aligned with NXP vendor kernel without any impact on audio functionality and go within 650MHz PLL limit. Cc: <stable@vger.kernel.org> Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: GPT1 clock mux option #5 should be sys_pll1_80mAnson Huang1-1/+1
i.MX8MM's GPT1 clock mux option #5 should be sys_pll1_80m, NOT sys_pll1_800m, correct it. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: Fix typo of pwm3 clock's mux option #4Anson Huang1-1/+1
i.MX8MM has no sys3_pll2_out clock, PWM3 clock's mux option #4 should be sys_pll3_out, sys3_pll2_out is a typo, fix it. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx: Remove unused clk based APIAbel Vesa1-24/+0
Now that the i.MX6 and i.MX7 clock drivers have been switched to clk_hw based, we can remove the clk based API that is not used by any i.MX clock driver. The following APIs are going away now: - imx_clk_busy_divider - imx_clk_busy_mux - imx_clk_fixup_divider - imx_clk_fixup_mux - imx_clk_mux_ldb - imx_clk_gate_dis_flags - imx_clk_gate_flags Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mq: set correct parent for usb ctrl clocksLi Jun1-2/+2
Per latest imx8mq datasheet of CCM, the parent of usb1_ctrl_root_clk and usb2_ctrl_root_clk is usb_bus. Signed-off-by: Li Jun <jun.li@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mq: Remove CLK_IS_CRITICAL flag for IMX8MQ_CLK_TMU_ROOTAnson Huang1-1/+1
IMX8MQ_CLK_TMU_ROOT is ONLY used for thermal module, the driver should manage this clock, so no need to have CLK_IS_CRITICAL flag set. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: rename 'share_count_dcss' to 'share_count_disp'Fancy Fang1-5/+5
Rename 'share_count_dcss' to 'share_count_disp', since the DCSS module does not exist on imx8mm platform. So rename it to avoid any unnecessary confusion. Signed-off-by: Fancy Fang <chen.fang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: correct the usb1_ctrl parent to be usb_busLi Jun1-1/+1
Per latest imx8mm datasheet of CCM, the parent of usb1_ctrl_root_clk should be usb_bus. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8: Add DSP related clocksDaniel Baluta1-0/+5
i.MX8QXP contains Hifi4 DSP. There are four clocks associated with DSP: * dsp_lpcg_core_clk * dsp_lpcg_ipg_clk * dsp_lpcg_adb_aclk * ocram_lpcg_ipg_clk Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx: Add support for i.MX8MN clock driverAnson Huang3-0/+643
This patch adds i.MX8MN clock driver support. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-18 00:16:09 +0300