summaryrefslogtreecommitdiff
path: root/drivers/clk/imx
AgeCommit message (Collapse)AuthorFilesLines
2023-01-18clk: imx: replace osc_hdmi with dummyDario Binacchi1-6/+6
[ Upstream commit e7fa365ff66f16772dc06b480cd78f858d10856b ] There is no occurrence of the hdmi oscillator in the reference manual (document IMX8MNRM Rev 2, 07/2022). Further, if we consider the indexes 76-81 and 134 of the "Clock Root" table of chapter 5 of the RM, there is no entry for the source select bits 101b, which is the setting referenced by "osc_hdmi". Fix by renaming "osc_hdmi" with "dummy", a clock which has already been used for missing source select bits. Tested on the BSH SystemMaster (SMM) S2 board. Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Acked-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221117113637.1978703-3-dario.binacchi@amarulasolutions.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18clk: imx8mn: correct the usb1_ctrl parent to be usb_busLi Jun1-1/+1
[ Upstream commit 134d43bb1ff09a696996f16ed8b28d404b770c8a ] Per latest imx8mn datasheet of CCM, the parent of usb1_ctrl_root_clk should be usb_bus. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-05clk: imx: imx6sx: remove the SET_RATE_PARENT flag for QSPI clocksHan Xu1-2/+2
[ Upstream commit b1ff1bfe81e763420afd5f3f25f0b3cbfd97055c ] There is no dedicate parent clock for QSPI so SET_RATE_PARENT flag should not be used. For instance, the default parent clock for QSPI is pll2_bus, which is also the parent clock for quite a few modules, such as MMDC, once GPMI NAND set clock rate for EDO5 mode can cause system hang due to pll2_bus rate changed. Fixes: f1541e15e38e ("clk: imx6sx: Switch to clk_hw based API") Signed-off-by: Han Xu <han.xu@nxp.com> Link: https://lore.kernel.org/r/20220915150959.3646702-1-han.xu@nxp.com Tested-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15clk: imx7d: Remove audio_mclk_root_clkAbel Vesa1-1/+0
[ Upstream commit eccac77ede3946c90143447cdc785dc16aec4b24 ] The audio_mclk_root_clk was added as a gate with the CCGR121 (0x4790), but according to the reference manual, there is no such gate. The CCGR121 belongs to ECSPI2 and it is not shared. Fixes: 8f6d8094b215b57 ("ARM: imx: add imx7d clk tree support") Reported-by: David Wolfe <david.wolfe@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20220127141052.1900174-2-abel.vesa@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27clk: imx8mn: Fix imx8mn_clko1_selsAdam Ford1-3/+3
[ Upstream commit 570727e9acfac1c2330a01dd5e1272e9c3acec08 ] When attempting to use sys_pll1_80m as the parent for clko1, the system hangs. This is due to the fact that the source select for sys_pll1_80m was incorrectly pointing to m7_alt_pll_clk, which doesn't yet exist. According to Rev 3 of the TRM, The imx8mn_clko1_sels also incorrectly references an osc_27m which does not exist, nor does an entry for source select bits 010b. Fix both by inserting a dummy clock into the missing space in the table and renaming the incorrectly name clock with dummy. Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20211117133202.775633-1-aford173@gmail.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26clk: imx: imx6ul: Move csi_sel mux to correct base registerStefan Riedmueller1-1/+1
[ Upstream commit 2f9d61869640f732599ec36b984c2b5c46067519 ] The csi_sel mux register is located in the CCM register base and not the CCM_ANALOG register base. So move it to the correct position in code. Otherwise changing the parent of the csi clock can lead to a complete system failure due to the CCM_ANALOG_PLL_SYS_TOG register being falsely modified. Also remove the SET_RATE_PARENT flag since one possible supply for the csi_sel mux is the system PLL which we don't want to modify. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210927072857.3940880-1-s.riedmueller@phytec.de Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29clk: imx8mq: Fix usdhc parents orderAbel Vesa1-2/+2
[ Upstream commit b159c63d82ff8ffddc6c6f0eb881b113b36ecad7 ] According to the latest RM (see Table 5-1. Clock Root Table), both usdhc root clocks have the parent order as follows: 000 - 25M_REF_CLK 001 - SYSTEM_PLL1_DIV2 010 - SYSTEM_PLL1_CLK 011 - SYSTEM_PLL2_DIV2 100 - SYSTEM_PLL3_CLK 101 - SYSTEM_PLL1_DIV3 110 - AUDIO_PLL2_CLK 111 - SYSTEM_PLL1_DIV8 So the audio_pll2_out and sys3_pll_out have to be swapped. Fixes: b80522040cd3 ("clk: imx: Add clock driver for i.MX8MQ CCM") Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reported-by: Cosmin Stefan Stoica <cosmin.stoica@nxp.com> Link: https://lore.kernel.org/r/1602753944-30757-1-git-send-email-abel.vesa@nxp.com Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01clk: imx: Fix division by zero warning on pfdv2Anson Huang1-0/+6
[ Upstream commit 28b2f82e0383e27476be8a5e13d2aea07ebeb275 ] Fix below division by zero warning: [ 3.176443] Division by zero in kernel. [ 3.181809] CPU: 0 PID: 88 Comm: kworker/0:2 Not tainted 5.3.0-rc2-next-20190730-63758-ge08da51-dirty #124 [ 3.191817] Hardware name: Freescale i.MX7ULP (Device Tree) [ 3.197821] Workqueue: events dbs_work_handler [ 3.202849] [<c01127d8>] (unwind_backtrace) from [<c010cd80>] (show_stack+0x10/0x14) [ 3.211058] [<c010cd80>] (show_stack) from [<c0c77e68>] (dump_stack+0xd8/0x110) [ 3.218820] [<c0c77e68>] (dump_stack) from [<c0c753c0>] (Ldiv0_64+0x8/0x18) [ 3.226263] [<c0c753c0>] (Ldiv0_64) from [<c05984b4>] (clk_pfdv2_set_rate+0x54/0xac) [ 3.234487] [<c05984b4>] (clk_pfdv2_set_rate) from [<c059192c>] (clk_change_rate+0x1a4/0x698) [ 3.243468] [<c059192c>] (clk_change_rate) from [<c0591a08>] (clk_change_rate+0x280/0x698) [ 3.252180] [<c0591a08>] (clk_change_rate) from [<c0591fc0>] (clk_core_set_rate_nolock+0x1a0/0x278) [ 3.261679] [<c0591fc0>] (clk_core_set_rate_nolock) from [<c05920c8>] (clk_set_rate+0x30/0x64) [ 3.270743] [<c05920c8>] (clk_set_rate) from [<c089cb88>] (imx7ulp_set_target+0x184/0x2a4) [ 3.279501] [<c089cb88>] (imx7ulp_set_target) from [<c0896358>] (__cpufreq_driver_target+0x188/0x514) [ 3.289196] [<c0896358>] (__cpufreq_driver_target) from [<c0899b0c>] (od_dbs_update+0x130/0x15c) [ 3.298438] [<c0899b0c>] (od_dbs_update) from [<c089a5d0>] (dbs_work_handler+0x2c/0x5c) [ 3.306914] [<c089a5d0>] (dbs_work_handler) from [<c0156858>] (process_one_work+0x2ac/0x704) [ 3.315826] [<c0156858>] (process_one_work) from [<c0156cdc>] (worker_thread+0x2c/0x574) [ 3.324404] [<c0156cdc>] (worker_thread) from [<c015cfe8>] (kthread+0x134/0x148) [ 3.332278] [<c015cfe8>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20) [ 3.339858] Exception stack(0xe82d5fb0 to 0xe82d5ff8) [ 3.345314] 5fa0: 00000000 00000000 00000000 00000000 [ 3.353926] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.362519] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-02clk: imx: Align imx sc clock parent msg structs to 4Leonard Crestez1-1/+1
commit 8400ab8896324641243b57fc49b448023c07409a upstream. The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: 666aed2d13ee ("clk: imx: scu: add set parent support") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lkml.kernel.org/r/aad021e432b3062c142973d09b766656eec18fde.1582216144.git.leonard.crestez@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02clk: imx: Align imx sc clock msg structs to 4Leonard Crestez1-3/+3
commit a0ae04a25650fd51b7106e742d27333e502173c6 upstream. The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: fe37b4820417 ("clk: imx: add scu clock common part") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lkml.kernel.org/r/10e97a04980d933b2cfecb6b124bf9046b6e4f16.1582216144.git.leonard.crestez@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-24clk: imx: Add correct failure handling for clk based helpersAbel Vesa1-15/+22
[ Upstream commit f60f1c62c3188fcca945581e35e3440ee3fdcc95 ] If the clk_hw based API returns an error, trying to return the clk from hw will end up in a NULL pointer dereference. So adding the to_clk checker and using it inside every clk based macro helper we handle that case correctly. This to_clk is also temporary and will go away along with the clk based macro helpers once there is no user that need them anymore. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-23clk: imx7ulp: Correct DDR clock mux optionsAnson Huang1-2/+2
commit 2e2b928a04bd74ea410da72bd60e1c5b06398276 upstream. In the latest reference manual Rev.0,06/2019, the DDR clock mux is extended to 2 bits, and the clock options are also changed, correct them accordingly. Fixes: b1260067ac3d ("clk: imx: add imx7ulp clk driver") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23clk: imx7ulp: Correct system clock source option #7Anson Huang1-1/+1
commit 96ac93a7c4bea4eb4186425795c00937d2dd6085 upstream. In the latest reference manual Rev.0,06/2019, the SCS's option #7 is no longer from upll, it is reserved, update clock driver accordingly. Fixes: b1260067ac3d ("clk: imx: add imx7ulp clk driver") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17clk: imx: pll14xx: Fix quick switch of S/K parameterLeonard Crestez1-32/+8
commit 094234fcf46146339caaac8282aa15d225a5911a upstream. The PLL14xx on imx8m can change the S and K parameter without requiring a reset and relock of the whole PLL. Fix clk_pll144xx_mp_change register reading and use it for pll1443 as well since no reset+relock is required on K changes either. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31clk: imx: pll14xx: fix clk_pll14xx_wait_lockPeng Fan1-1/+1
commit c3a5fd15ed0c1494435e4e35fbee734ae46b5073 upstream. The usage of readl_poll_timeout is wrong, the 3rd parameter(cond) should be "val & LOCK_STATUS" not "val & LOCK_TIMEOUT_US", It is not check whether the pll locked, LOCK_STATUS reflects the mask, not LOCK_TIMEOUT_US. Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Cc: <stable@vger.kernel.org> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31clk: imx: clk-composite-8m: add lock to gate/muxPeng Fan1-0/+2
commit 073a01e8d7c23b3efb59a3d4c20aa546f9ec29a9 upstream. There is a lock to divider in the composite driver, but that's not enough. lock to gate/mux are also needed to provide exclusive access to the register. Fixes: d3ff9728134e ("clk: imx: Add imx composite clock") Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_tablePeng Fan1-0/+1
commit ed11e31709d7ddb19d4dc451d5bbfb15129f4cad upstream. There should be a sentinel of ulp_div_table, otherwise _get_table_div may access data out of the array. Fixes: b1260067ac3d ("clk: imx: add imx7ulp clk driver") Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-28clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARMLeonard Crestez2-2/+2
During cpu frequency switching the main "CLK_ARM" is reparented to an intermediate "step" clock. On imx8mm and imx8mn the 24M oscillator is used for this purpose but it is extremely slow, increasing wakeup latencies to the point that i2c transactions can timeout and system becomes unresponsive. Fix by switching the "step" clk to SYS_PLL1_800M, matching the behavior of imx8m cpufreq drivers in imx vendor tree. This bug was not immediately apparent because upstream arm64 defconfig uses the "performance" governor by default so no cpufreq transitions happen. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver") Cc: stable@vger.kernel.org Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lkml.kernel.org/r/f5d2b9c53f1ed5ccb1dd3c6624f56759d92e1689.1571771777.git.leonard.crestez@nxp.com Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-18clk: imx: imx8mn: fix pll mux bitPeng Fan1-22/+10
pll BYPASS bit should be kept inside pll driver for glitchless freq setting following spec. If exposing the bit, that means pll driver and clk driver has two paths to touch this bit, which is wrong. So use EXT_BYPASS bit here. And drop uneeded set parent, because EXT_BYPASS default is 0. Suggested-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-5-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-18clk: imx: imx8mm: fix pll mux bitPeng Fan1-22/+10
pll BYPASS bit should be kept inside pll driver for glitchless freq setting following spec. If exposing the bit, that means pll driver and clk driver has two paths to touch this bit, which is wrong. So use EXT_BYPASS bit here. And drop uneeded set parent, because EXT_BYPASS default is 0. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Suggested-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-4-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-18clk: imx: clk-pll14xx: unbypass PLL by defaultPeng Fan1-0/+5
When registering the PLL, unbypass the PLL. The PLL has two bypass control bit, BYPASS and EXT_BYPASS. we will expose EXT_BYPASS to clk driver for mux usage, and keep BYPASS inside pll14xx usage. The PLL has a restriction that when M/P change, need to RESET/BYPASS pll to avoid glitch, so we could not expose BYPASS. To make it easy for clk driver usage, unbypass PLL which does not hurt current function. Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-3-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-18clk: imx: pll14xx: avoid glitch when set ratePeng Fan1-1/+21
According to PLL1443XA and PLL1416X spec, "When BYPASS is 0 and RESETB is changed from 0 to 1, FOUT starts to output unstable clock until lock time passes. PLL1416X/PLL1443XA may generate a glitch at FOUT." So set BYPASS when RESETB is changed from 0 to 1 to avoid glitch. In the end of set rate, BYPASS will be cleared. When prepare clock, also need to take care to avoid glitch. So we also follow Spec to set BYPASS before RESETB changed from 0 to 1. And add a check if the RESETB is already 0, directly return 0; Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-2-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-24clk: imx: imx8mn: fix audio pll settingPeng Fan1-2/+2
The AUDIO PLL max support 650M, so the original clk settings violate spec. This patch makes the output 786432000 -> 393216000, and 722534400 -> 361267200 to aligned with NXP vendor kernel without any impact on audio functionality and go within 650MHz PLL limit. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mn: Add necessary frequency support for ARM PLL tableAnson Huang1-0/+2
i.MX8MN supports CPU running at 1.5GHz/1.4GHz/1.2GHz, add missing frequency for ARM PLL table. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mn: Add missing rate_count assignment for each PLL structureAnson Huang1-0/+7
Add .rate_count assignment which is necessary for searching required PLL rate from the each PLL table. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mn: fix int pll clk gatePeng Fan1-6/+6
To Frac pll, the gate shift is 13, however to Int PLL the gate shift is 11. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mn: Add GIC clockLeonard Crestez1-0/+5
This is enabled by default but if it's not explicitly defined and marked as critical then its parent might get turned off. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mn: Fix incorrect parentsLeonard Crestez1-7/+7
* Replace to audio_pll2_clk with audio_pll2_out * Replace sys3_pll2_out with sys_pll3_out * Replace sys1_pll_40m with sys_pll1_40m * qspi parent[2] is sys_pll2_333m not sys_pll1_800m Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mm: Fix incorrect parentsLeonard Crestez1-4/+4
* There is no video_pll2 on imx8mm, replace with dummy * Replace reference to sys_pll3_clk with sys_pll3_out * qspi parent[2] is sys_pll2_333m not sys_pll1_800m Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mq: Fix sys3 pll referencesLeonard Crestez1-56/+56
The "sys3_pll2_out" CLK was removed in refactoring so all references need to be updated to "sys3_pll_out" Fixes: e9dda4af685f ("clk: imx: Refactor entire sccg pll clk") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12clk: imx8mq: Unregister clks when of_clk_add_provider failedAnson Huang1-1/+9
When of_clk_add_provider failed, all clks should be unregistered. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12clk: imx8mm: Unregister clks when of_clk_add_provider failedAnson Huang1-1/+6
When of_clk_add_provider failed, all clks should be unregistered. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mq: Mark AHB clock as criticalAbel Vesa1-1/+2
Initially, the TMU_ROOT clock was marked as critical, which automatically made the AHB clock to stay always on. Since the TMU_ROOT clock is not marked as critical anymore, following commit: "clk: imx8mq: Remove CLK_IS_CRITICAL flag for IMX8MQ_CLK_TMU_ROOT" all the clocks that derive from ipg_root clock (and implicitly ahb clock) would also have to enable, along with their own gate, the AHB clock. But considering that AHB is actually a bus that has to be always on, we mark it as critical in the clock provider driver and then all the clocks that derive from it can be controlled through the dedicated per IP gate which follows after the ipg_root clock. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Tested-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mn: Keep uart clocks on for early consoleAnson Huang1-0/+10
Call imx_register_uart_clocks() API to keep uart clocks enabled when earlyprintk or earlycon is active. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx: Remove unused function statementAnson Huang1-1/+0
imx_register_uart_clocks_hws() function is NOT implemented at all, remove it. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx7ulp: Make sure earlycon's clock is enabledAnson Huang1-0/+31
Earlycon's clock could be disabled during kernel boot up, if earlycon is enabled and its clock is gated, then kernel boot up will fail. Make sure earlycon's clock is enabled during kernel boot up. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: Switch to platform driverAbel Vesa1-21/+36
There is no strong reason for this to use CLK_OF_DECLARE instead of being a platform driver. Plus, this will now be aligned with the other i.MX8M clock drivers which are platform drivers. In order to make the clock provider a platform driver all the data and code needs to be outside of .init section. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx: imx8mm: fix audio pll settingPeng Fan1-2/+2
The AUDIO PLL max support 650M, so the original clk settings violate spec. This patch makes the output 786432000 -> 393216000, and 722534400 -> 361267200 to aligned with NXP vendor kernel without any impact on audio functionality and go within 650MHz PLL limit. Cc: <stable@vger.kernel.org> Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: GPT1 clock mux option #5 should be sys_pll1_80mAnson Huang1-1/+1
i.MX8MM's GPT1 clock mux option #5 should be sys_pll1_80m, NOT sys_pll1_800m, correct it. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: Fix typo of pwm3 clock's mux option #4Anson Huang1-1/+1
i.MX8MM has no sys3_pll2_out clock, PWM3 clock's mux option #4 should be sys_pll3_out, sys3_pll2_out is a typo, fix it. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx: Remove unused clk based APIAbel Vesa1-24/+0
Now that the i.MX6 and i.MX7 clock drivers have been switched to clk_hw based, we can remove the clk based API that is not used by any i.MX clock driver. The following APIs are going away now: - imx_clk_busy_divider - imx_clk_busy_mux - imx_clk_fixup_divider - imx_clk_fixup_mux - imx_clk_mux_ldb - imx_clk_gate_dis_flags - imx_clk_gate_flags Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mq: set correct parent for usb ctrl clocksLi Jun1-2/+2
Per latest imx8mq datasheet of CCM, the parent of usb1_ctrl_root_clk and usb2_ctrl_root_clk is usb_bus. Signed-off-by: Li Jun <jun.li@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mq: Remove CLK_IS_CRITICAL flag for IMX8MQ_CLK_TMU_ROOTAnson Huang1-1/+1
IMX8MQ_CLK_TMU_ROOT is ONLY used for thermal module, the driver should manage this clock, so no need to have CLK_IS_CRITICAL flag set. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: rename 'share_count_dcss' to 'share_count_disp'Fancy Fang1-5/+5
Rename 'share_count_dcss' to 'share_count_disp', since the DCSS module does not exist on imx8mm platform. So rename it to avoid any unnecessary confusion. Signed-off-by: Fancy Fang <chen.fang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: correct the usb1_ctrl parent to be usb_busLi Jun1-1/+1
Per latest imx8mm datasheet of CCM, the parent of usb1_ctrl_root_clk should be usb_bus. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8: Add DSP related clocksDaniel Baluta1-0/+5
i.MX8QXP contains Hifi4 DSP. There are four clocks associated with DSP: * dsp_lpcg_core_clk * dsp_lpcg_ipg_clk * dsp_lpcg_adb_aclk * ocram_lpcg_ipg_clk Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx: Add support for i.MX8MN clock driverAnson Huang3-0/+643
This patch adds i.MX8MN clock driver support. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx: Add API for clk unregister when driver probe failAnson Huang2-0/+9
For i.MX clock drivers probe fail case, clks should be unregistered in the return path, this patch adds a common API for i.MX clock drivers to unregister clocks when fail. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: Make 1416X/1443X PLL macro definitions common for usageAnson Huang2-17/+17
1416X/1443X PLL are used on i.MX8MM and i.MX8MN and maybe other i.MX8M series SoC later, the macro definitions of these PLLs' initialization should be common for usage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds19-1992/+2217
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 01:43:31 +0300