summaryrefslogtreecommitdiff
path: root/drivers/clk/imx/clk-imx8mm.c
AgeCommit message (Collapse)AuthorFilesLines
2020-05-21clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slicePeng Fan1-9/+9
Switch the bus clk use imx8m_clk_hw_composite_bus, then we could avoid possible issue when setting mux of the clk. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20clk: imx8m: migrate A53 clk root to use composite corePeng Fan1-3/+3
Migrate A53 clk root to use composite core clk type. It will simplify code and make it easy to use composite specific mux operation. Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20clk: imx8m: drop clk_hw_set_parent for A53Peng Fan1-3/+0
The parent settings have been moved to dtsi, we no need to set parent here. And clk_hw_set_parent will trigger lockdep warning, because this api not have prepare_lock. Reported-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-11clk: imx8mm: A53 core clock no need to be criticalAnson Huang1-4/+4
'A53_CORE' is just a mux and no need to be critical, being critical will cause its parent clock always ON which does NOT make sense, to make sure CPU's hardware clock source NOT being disabled during clock tree setup, need to move the 'A53_SRC'/'A53_CORE' reparent operations to after critical clock 'ARM_CLK' setup finished. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-24clk: imx: imx8mm: fix a53 cpu clockPeng Fan1-4/+12
The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root signoff timing is 1Ghz, however the A53 core which sources from CCM root could run above 1GHz which voilates the CCM. There is a CORE_SEL slice before A53 core, we need configure the CORE_SEL slice source from ARM PLL, not A53 CCM clk root. The A53 CCM clk root should only be used when need to change ARM PLL frequency. Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out. Configure a53 ccm root sources from 800MHz sys pll Configure a53 core sources from arm_pll_out Mark arm_a53_core as critical clock Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-19clk: imx8mm: Remove unused includesAnson Huang1-2/+0
There is nothing in use from init.h/of.h, remove them. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx8mm: Add missing of_node_put()Anson Huang1-0/+1
After finishing using device node got from of_find_compatible_node(), of_node_put() needs to be called. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx: Include clk-provider.h instead of clk.h for i.MX8M SoCs clock driverAnson Huang1-1/+1
The i.MX8M SoCs clock driver are provider, NOT consumer, so clk-provider.h should be used instead of clk.h. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx8mm: Add CLKO2 supportFabio Estevam1-0/+3
Add CLKO2 support, which is useful for debugging purposes. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx8mm: Fix the CLKO1 source select listFabio Estevam1-2/+2
The CLKO1 clock source select list is the following as per the i.MX8MM Reference Manual (put in increasing order): 000 - 24M_REF_CLK 001 - SYSTEM_PLL1_CLK 010 - None 011 - SYSTEM_PLL1_DIV4 100 - AUDIO_PLL2_CLK 101 - SYSTEM_PLL2_DIV2 110 - VPU_PLL_CLK 111 - SYSTEM_PLL1_DIV10 Fix it accordingly. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-14clk: imx: imx8mm: use imx8m_clk_hw_composite_corePeng Fan1-14/+21
Use imx8m_clk_hw_composite_core to simplify code. Add new definitions, and X_SRC/CG/DIV will be alias to the new definitions for backwards compatibility Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23clk: imx: imx8mm: Switch to clk_hw based APIPeng Fan1-271/+284
Switch the entire clk-imx8mm driver to clk_hw based API. This allows us to move closer to a clear split between consumer and provider clk APIs. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx8m: Suppress bind attrsLeonard Crestez1-0/+5
The clock drivers on imx8m series are registered as platform devices and this opens the possibility of reloading the driver at runtime. This doesn't actually work: clocks are never removed and attempting to bind again results in registration errors and a crash. Almost all devices depend on clocks anyway so rebinding is unlikely to ever be useful Fix this by explicitly suppressing bind attrs like several other clock drivers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx: Mark dram pll on 8mm and 8mn with CLK_GET_RATE_NOCACHELeonard Crestez1-1/+1
DRAM frequency switches are executed in firmware and can change the configuration of the DRAM PLL outside linux. Mark these CLKs with CLK_GET_RATE_NOCACHE so we always read back the PLL config registers and recalculate rates. In current DRAM frequency tables on 8mm/8mn only the maximum frequency uses the PLL so it's always configured in the same way. However reading back the PLL configuration is the correct behavior and allows additional setpoints in the future. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram clocksLeonard Crestez1-2/+7
These clocks are only modified as part of DRAM frequency switches during which DRAM itself is briefly inaccessible. The switch is performed with a SMC call to by TF-A which runs from a SRAM area; upon returning to linux several clocks bits are modified and we need to update them. For rate bits an easy solution is to just mark with CLK_GET_RATE_NOCACHE so that new rates are always read back from registers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-02Merge tag 'clk-for-linus' of ↵Linus Torvalds1-102/+48
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This merge window we have one small clk provider API in the core framework and then a bunch of driver updates and a handful of new drivers. In terms of diffstat the Qualcomm and Amlogic drivers are high up there because of all the clk data introcued by new drivers. The Nvidia Tegra driver had a lot of work done this cycle too to support suspend/resume and memory controllers. And the OMAP clk driver got proper clk and reset handling in place. Rounding out the patches are various updates to remove unused data, mark things static, correct incorrect data in drivers, etc. All the little things that improve drivers and maintain code health. I will point out that there's a patch in here for the GPIO clk driver, that almost nobody uses, which changes behavior and causes clk_set_rate() to try to change the GPIO gate clk's parent. Other than that things are fairly well SoC specific here. Core: - Add a clk provider API to get current parent index - Plug a memory leak in clk_unregister() path New Drivers: - CGU in Ingenix X1000 - Bitmain BM1880 clks - Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Add support for the Renesas R-Car M3-W+ (r8a77961) SoC - Add support for the Renesas RZ/G2N (r8a774b1) SoC - Add Tegra20/30 External Memory Clock (EMC) support Updates: - Make gpio gate clks propagate rate setting up to parent - Prepare Armada 3700 for suspend to RAM by moving PCIe suspend/resume priority - Drop unused variables, enums, etc. in various clk drivers - Convert various drivers to use devm_platform_ioremap_resource() - Use struct_size() some more in various clk drivers - Improve Rockchip px30 clk tree - Add suspend/resume support to Tegra210 clk driver - Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP - Allwinner DT exports and H6 clk tree fixes - Proper clk and reset handling for OMAP SoCs - Revamped TI divider clk to clamp max divider - Make 1443X/1416X PLL clock structure common for reusing among i.MX8 SoCs - Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used - Add VIDEO2_PLL clock for imx8mq - Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs - Add sm1 support in the Amlogic audio clock controller - Switch some clocks on R-Car Gen2/3 to .determine_rate() - Remove Renesas R-Car Gen2 legacy DT clock support - Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3 - Improve Renesas R-Car Gen3 SD clock handling - Add rate table for Samsung exynos542x GPU and VPLL clks - Fix potential CPU performance degradation after system suspend/resume cycle on exynos542x SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (160 commits) clk: aspeed: Add RMII RCLK gates for both AST2500 MACs MAINTAINERS: Add entry for BM1880 SoC clock driver clk: Add common clock driver for BM1880 SoC dt-bindings: clock: Add devicetree binding for BM1880 SoC clk: Add clk_hw_unregister_composite helper function definition clk: Zero init clk_init_data in helpers clk: ingenic: Allow drivers to be built with COMPILE_TEST MAINTAINERS: Update section for Ux500 clock drivers clk: mark clk_disable_unused() as __init clk: Fix memory leak in clk_unregister() clk: Ingenic: Add CGU driver for X1000. dt-bindings: clock: Add X1000 bindings. clk: tegra: Use match_string() helper to simplify the code clk: pxa: fix one of the pxa RTC clocks clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle() clk: armada-xp: remove unused code clk: tegra: Fix build error without CONFIG_PM_SLEEP clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP clk: tegra: Optimize PLLX restore on Tegra20/30 clk: tegra: Add suspend and resume support on Tegra210 ...
2019-10-28clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARMLeonard Crestez1-1/+1
During cpu frequency switching the main "CLK_ARM" is reparented to an intermediate "step" clock. On imx8mm and imx8mn the 24M oscillator is used for this purpose but it is extremely slow, increasing wakeup latencies to the point that i2c transactions can timeout and system becomes unresponsive. Fix by switching the "step" clk to SYS_PLL1_800M, matching the behavior of imx8m cpufreq drivers in imx vendor tree. This bug was not immediately apparent because upstream arm64 defconfig uses the "performance" governor by default so no cpufreq transitions happen. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver") Cc: stable@vger.kernel.org Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lkml.kernel.org/r/f5d2b9c53f1ed5ccb1dd3c6624f56759d92e1689.1571771777.git.leonard.crestez@nxp.com Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-25clk: imx: imx8mm: mark sys_pll1/2 as fixed clockPeng Fan1-26/+20
According Architecture definition guide, SYS_PLL1 is fixed at 800MHz, SYS_PLL2 is fixed at 1000MHz, so let's use imx_clk_fixed to register the clocks and drop code that could change the rate. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25clk: imx8mm: Define gates for pll1/2 fixed dividersLeonard Crestez1-19/+38
On imx8mm there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2 each with their own gate. Only one of these gates (the one "dividing" by one) is currently defined and it's incorrectly set as the parent of all the fixed-factor dividers. Add the other 8 gates to the clock tree between sys_pll1/2_bypass and the fixed dividers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06clk: imx8mm: Move 1443X/1416X PLL clock structure to common placeAnson Huang1-77/+10
Many i.MX8M SoCs use same 1443X/1416X PLL, such as i.MX8MM, i.MX8MN and later i.MX8M SoCs, moving these PLL definitions to pll14xx driver can save a lot of duplicated code on each platform. Meanwhile, no need to define PLL clock structure for every module which uses same type of PLL, e.g., audio/video/dram use 1443X PLL, arm/gpu/vpu/sys use 1416X PLL, define 2 PLL clock structure for each group is enough. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-09-18clk: imx: imx8mm: fix pll mux bitPeng Fan1-22/+10
pll BYPASS bit should be kept inside pll driver for glitchless freq setting following spec. If exposing the bit, that means pll driver and clk driver has two paths to touch this bit, which is wrong. So use EXT_BYPASS bit here. And drop uneeded set parent, because EXT_BYPASS default is 0. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Suggested-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-4-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-19clk: imx8mm: Fix incorrect parentsLeonard Crestez1-4/+4
* There is no video_pll2 on imx8mm, replace with dummy * Replace reference to sys_pll3_clk with sys_pll3_out * qspi parent[2] is sys_pll2_333m not sys_pll1_800m Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12clk: imx8mm: Unregister clks when of_clk_add_provider failedAnson Huang1-1/+6
When of_clk_add_provider failed, all clks should be unregistered. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: Switch to platform driverAbel Vesa1-21/+36
There is no strong reason for this to use CLK_OF_DECLARE instead of being a platform driver. Plus, this will now be aligned with the other i.MX8M clock drivers which are platform drivers. In order to make the clock provider a platform driver all the data and code needs to be outside of .init section. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx: imx8mm: fix audio pll settingPeng Fan1-2/+2
The AUDIO PLL max support 650M, so the original clk settings violate spec. This patch makes the output 786432000 -> 393216000, and 722534400 -> 361267200 to aligned with NXP vendor kernel without any impact on audio functionality and go within 650MHz PLL limit. Cc: <stable@vger.kernel.org> Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: GPT1 clock mux option #5 should be sys_pll1_80mAnson Huang1-1/+1
i.MX8MM's GPT1 clock mux option #5 should be sys_pll1_80m, NOT sys_pll1_800m, correct it. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: Fix typo of pwm3 clock's mux option #4Anson Huang1-1/+1
i.MX8MM has no sys3_pll2_out clock, PWM3 clock's mux option #4 should be sys_pll3_out, sys3_pll2_out is a typo, fix it. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: rename 'share_count_dcss' to 'share_count_disp'Fancy Fang1-5/+5
Rename 'share_count_dcss' to 'share_count_disp', since the DCSS module does not exist on imx8mm platform. So rename it to avoid any unnecessary confusion. Signed-off-by: Fancy Fang <chen.fang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: correct the usb1_ctrl parent to be usb_busLi Jun1-1/+1
Per latest imx8mm datasheet of CCM, the parent of usb1_ctrl_root_clk should be usb_bus. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mm: Make 1416X/1443X PLL macro definitions common for usageAnson Huang1-17/+0
1416X/1443X PLL are used on i.MX8MM and i.MX8MN and maybe other i.MX8M series SoC later, the macro definitions of these PLLs' initialization should be common for usage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds1-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-06-07clk: imx: imx8mm: correct audio_pll2_clk to audio_pll2_outPeng Fan1-3/+3
There is no audio_pll2_clk registered, it should be audio_pll2_out. Cc: <stable@vger.kernel.org> Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-23clk: imx8mm: Mark dram_apb criticalLeonard Crestez1-1/+1
This clock is used for dram operations inside TF-A and must be kept enabled for features such as suspend/resume dram retention and busfreq to work. This is required for imx8mm suspend to work with NXP branch of TF-A. There is an equivalent clk on imx8mq and it's always been marked as critical in upstream. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-23clk: imx8m: Add GIC clockLeonard Crestez1-0/+4
This is documented in the reference manuals as GIC_CLK_ROOT. In some out-of-tree DVFS scenarios the gic clock can end up as the only user of sys_pll2 so if we don't define the gic clk explicitly it might be turned off. This applies to both 8mq and 8mm: same clk register but diffferent parents. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-23clk: imx8mm: add SNVS clock to clock treeAnson Huang1-0/+1
i.MX8MM has clock gate for SNVS module, add it into clock tree for SNVS RTC driver to manage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-21clk: imx: imx8mm: fix int pll clk gatePeng Fan1-6/+6
To Frac pll, the gate shift is 13, however to Int PLL the gate shift is 11. Cc: <stable@vger.kernel.org> Fixes: ba5625c3e27 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-20clk: imx8mm: add GPIO clocks to clock treeAnson Huang1-0/+5
i.MX8MM has clock gate for each GPIO bank, add them into clock tree for GPIO driver to manage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-02-22clk: imx: imx8mm: Mark init function __initStephen Boyd1-1/+1
It calls another __init marked function and thus causes a section mismatch if we don't mark it this way. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx: Add clock driver support for imx8mmBai Ping1-0/+675
Add clock driver support for i.MX8MM SOC. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-07 02:22:20 +0300