summaryrefslogtreecommitdiff
path: root/drivers/clk/clk-nomadik.c
AgeCommit message (Collapse)AuthorFilesLines
2015-07-20clk: nomadik: Remove clk.h and clkdev.h includesStephen Boyd1-2/+1
Clock provider drivers generally shouldn't include clk.h because it's the consumer API. Remove the include here because this is a provider driver. This driver also includes clkdev.h even though it isn't used, so drop it too and add slab.h to make sure everything still compiles. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-16drivers/clk: don't use module_init in clk-nomadik.c which is non-modularPaul Gortmaker1-2/+1
The clk-nomadik.o is built for ARCH_NOMADIK -- which is bool, and hence this code is either present or absent. It will never be modular, so using module_init as an alias for __initcall can be somewhat misleading. Fix this up now, so that we can relocate module_init from init.h into module.h in the future. If we don't do this, we'd have to add module.h to obviously non-modular code, and that would be a worse thing. Note that direct use of __initcall is discouraged, vs. one of the priority categorized subgroups. As __initcall gets mapped onto device_initcall, our use of device_initcall directly in this change means that the runtime impact is zero -- it will remain at level 6 in initcall ordering. Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2014-02-26clk: nomadik: fix multiplatform problemLinus Walleij1-0/+3
The Nomadik debugfs screws up multiplatform boots if debugfs is enabled on the multiplatform image, since it's a simple initcall that is unconditionally executed and reads from certain memory locations. Fix this by checking that the driver has been properly initialized, so a base offset to the Nomadik SRC controller exists, before proceeding to register debugfs files. Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-07clk: nomadik: fix missing __init on nomadik_src_initSebastian Hesselbarth1-1/+1
nomadik_src_init references __initconst sections but lacks an __init itself. Add __init to fix the section mismatch. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-29clk: nomadik: declare OF clock providerSebastian Hesselbarth1-30/+15
Common clock framework allows to register clock providers to get called on of_clk_init() by using CLK_OF_DECLARE. This converts nomadik clock provider to make use of it and get rid of the mach specific clk init call. As clocks require system reset controller base address to be initialized each clock driver checks src_base and calls new nomadik_src_init if required. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-09-29clk: nomadik: move src init out of nomadik_clk_initSebastian Hesselbarth1-70/+74
nomadik_clk_init currently also maps system reset controller base address used by clocks and registers a reboot notifier. To allow further cleanup of nomadik clk setup, this moves system reset controller setup from nomadik_clk_init to its own function. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-09-22clk: nomadik: set all timers to use 2.4 MHz TIMCLKLinus Walleij1-0/+21
This fixes a regression for the Nomadik on the main system timers. The Nomadik seemed a bit slow and its heartbeat wasn't looking healthy. And it was not strange, because it has been connected to the 32768 Hz clock at boot, while being told by the clock driver that it was 2.4MHz. Actually connect the TIMCLK to 2.4MHz by default as this is what we want for nice scheduling, clocksource and clock event. Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28clk: nomadik: Fix incorrect placement of __initconstSachin Kamat1-2/+2
__initconst should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-20clk: nomadik: implement the Nomadik clocks properlyLinus Walleij1-3/+548
The Nomadik clock implementation was a stub just using fixed clocks. This implements the clocks properly instead of relying on them all being on at boot and leaving them all on. The PLLs are on the top locking to the main chrystal oscillator, then the HCLK for the peripherals are below PLL2. The gated clocks are implemented with zero cells and given the clock ID as a property of each node, so every gate need to have its own node in the device tree. This is because the gate registers contain both HCLK gates and PCLK gates, where the latter has HCLK as parent. As can be seen from the register layout, this is a complete mixup, which means all these gates need their own node to properly model parent/child relations for PCLKs apart from the HCLKs. This driver also adds a helpful debugfs file to inspect the hardware state of the clock gates. This is the end result in <debugfs>/clk/clk_summary after applying a proper device tree: ulpiclk 0 0 60000000 mxtal 3 3 19200000 pll2 1 1 864000000 clk48 3 3 48000000 rngcclk 1 1 48000000 usbmclk 0 0 48000000 mshcclk 0 0 48000000 mspclk3 0 0 48000000 x3dclk 0 0 48000000 skeclk 0 0 48000000 owmclk 0 0 48000000 mspclk2 0 0 48000000 mspclk1 0 0 48000000 uart2clk 0 0 48000000 ipbmcclk 0 0 48000000 ipi2cclk 0 0 48000000 usbclk 0 0 48000000 mspclk0 0 0 48000000 uart1clk 1 2 48000000 i2c1clk 0 0 48000000 i2c0clk 0 0 48000000 sdiclk 1 1 48000000 uart0clk 0 0 48000000 sspiclk 0 0 48000000 irdaclk 0 0 48000000 clk72 0 0 72000000 difclk 0 0 72000000 clcdclk 0 0 72000000 clk216 0 0 216000000 hsiclkrx 0 0 216000000 clk108 0 0 108000000 hsiclktx 0 0 108000000 clk27 0 0 27000000 pll1 1 1 264000000 hclk 3 3 264000000 hclkrng 1 1 264000000 hclkusbm 0 0 264000000 hclkcryp 0 0 264000000 hclkhash 0 0 264000000 hclk3d 0 0 264000000 hclkhpi 0 0 264000000 hclksva 0 0 264000000 hclksaa 0 0 264000000 hclkdif 0 0 264000000 hclkusb 0 0 264000000 hclkclcd 0 0 264000000 hclkdma1 0 0 264000000 hclksdram 0 0 264000000 hclksmc 1 1 264000000 hclkdma0 0 0 264000000 pclk 7 9 264000000 pclkmsp3 0 0 264000000 pclkmshc 0 0 264000000 pclkhsem 0 0 264000000 pclkske 0 0 264000000 pclkowm 0 0 264000000 pclkmsp2 0 0 264000000 pclkmsp1 0 0 264000000 pclkuart2 0 0 264000000 pclkxti 0 0 264000000 pclkhsi 0 0 264000000 pclkmsp0 0 0 264000000 pclkuart1 1 1 264000000 pclki2c1 0 0 264000000 pclki2c0 0 0 264000000 pclksdi 1 1 264000000 pclkuart0 1 1 264000000 pclkssp 0 0 264000000 pclkirda 0 0 264000000 timclk 1 1 2400000 Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-12ARM: nomadik: register clocksource from device treeLinus Walleij1-15/+0
This switches the Nomadik platform to also registering its clocksource from the device tree, removing unused support code as we go along. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-12ARM: nomadik: convert all clocks except timer to dtLinus Walleij1-19/+7
This moves all Nomadik clocks except the one used for the timer/clocksource over to the device tree. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15ARM: nomadik: switch over to using the FSMC driverLinus Walleij1-0/+1
The Nomadik NAND driver is really just a subset of the existing FSMC driver, so let's switch over to using that driver instead, since it handles more variants of this chip. The callbacks for setting up the chip is doing stuff now handled by the FSMC driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-06-10ARM: nomadik: convert to generic clockLinus Walleij1-0/+47
Remove more custom stuff by simply converting the Nomadik machine to use generic clocks and move the driver to drivers/clk. Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Mike Turquette <mturquette@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 02:22:42 +0300