| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where
most of the SoC's components are powered off (including PMC). Resuming
from this mode is done with the help of bootloader. Peripherals are not
aware of the power saving mode thus most of them are disabling clocks in
proper suspend API and re-enable them in resume API without taking into
account the previously setup rate. Moreover some of the peripherals are
acting as wakeup sources and are not disabling the clocks in this
scenario, when suspending. Since backup mode cuts the power for
peripherals, in resume part these clocks needs to be re-configured.
The initial PMC suspend/resume code was designed only for SAMA5D2's PMC
(as it was the only one supporting backup mode). SAMA7G supports also
backup mode and its PMC is different (few new functionalities, different
registers offsets, different offsets in registers for each
functionalities). To address both SAMA5D2 and SAMA7G5 PMC add
.save_context()/.resume_context() support to each clocks driver and call
this from PMC driver.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20211011112719.3951784-2-claudiu.beznea@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add UTMI support for SAMA7G5. SAMA7G5's UTMI control is done via
XTALF register. Values written at bits 2..0 in this register
correspond to the on board crystal oscillator frequency.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-18-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move all the DT backward compatibility code to its own file so it can be
deleted later.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Remove static keyword to allow functions to be used from other units. Also
move some struct and function declarations to pmc.h
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[sboyd@kernel.org: Include pmc.h]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
By default, it is assumed that the UTMI clock is generated from a 12 MHz
reference clock (MAINCK). If it's not the case, the FREQ field of the
SFR_UTMICKTRIM has to be updated to generate the UTMI clock in the
proper way.
The UTMI clock has a fixed rate of 480 MHz. In fact, there is no
multiplier we can configure. The multiplier is managed internally,
depending on the reference clock frequency, to achieve the target of
480 MHz.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
Now that we have clk_hw based provider APIs to register clks, we
can get rid of struct clk pointers in this driver, allowing us to
move closer to a clear split of consumer and provider clk APIs.
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
The AT91 clock drivers make use of IRQs to avoid polling when waiting for
some clocks to be enabled. Unfortunately, this leads to a crash when those
IRQs are threaded (which happens when using preempt-rt) because they are
registered before thread creation is possible.
Use polling on those clocks instead to avoid the problem.
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
|
Use the regmap coming from syscon to access the registers instead of using
pmc_read/pmc_write. This allows to avoid passing the at91_pmc structure to
the child nodes of the PMC.
The final benefit is to have each clock register itself instead of having
to iterate over the children.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
|
at91_pmc_read is a workaround to allow external drivers to acces some
registers of the PMC. There is no need for it in clk-utmi.c as we aready
have a pointer to the struct at91_pmc.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
Do not leak memory and free irqs in case of an error.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: David Dueck <davidcdueck@googlemail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
This adds new at91 utmi clock implementation using common clk framework.
This clock is a pll with a fixed factor (x40).
It is used as a source for usb clock.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
