summaryrefslogtreecommitdiff
path: root/drivers/clk/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2023-10-31Merge branches 'clk-renesas', 'clk-kunit', 'clk-regmap' and ↵Stephen Boyd1-0/+1
'clk-frac-divider' into clk-next - Make clk kunit tests work with lockdep - Fix clk gate kunit test for big-endian - Convert more than a handful of clk drivers to use regmap maple tree - Consider the CLK_FRAC_DIVIDER_ZERO_BASED in fractional divider clk implementation * clk-renesas: (23 commits) clk: renesas: r9a08g045: Add clock and reset support for SDHI1 and SDHI2 clk: renesas: rzg2l: Use %x format specifier to print CLK_ON_R() clk: renesas: Add minimal boot support for RZ/G3S SoC clk: renesas: rzg2l: Add divider clock for RZ/G3S clk: renesas: rzg2l: Refactor SD mux driver clk: renesas: rzg2l: Remove CPG_SDHI_DSEL from generic header clk: renesas: rzg2l: Add struct clk_hw_data clk: renesas: rzg2l: Add support for RZ/G3S PLL clk: renesas: rzg2l: Remove critical area clk: renesas: rzg2l: Fix computation formula clk: renesas: rzg2l: Trust value returned by hardware clk: renesas: rzg2l: Lock around writes to mux register clk: renesas: rzg2l: Wait for status bit of SD mux before continuing clk: renesas: rcar-gen3: Extend SDnH divider table dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC clk: renesas: r8a7795: Constify r8a7795_*_clks clk: renesas: r9a06g032: Name anonymous structs clk: renesas: r9a06g032: Fix kerneldoc warning clk: renesas: rzg2l: Use u32 for flag and mux_flags clk: renesas: rzg2l: Use FIELD_GET() for PLL register fields ... * clk-kunit: clk: Fix clk gate kunit test on big-endian CPUs clk: Parameterize clk_leaf_mux_set_rate_parent clk: Drive clk_leaf_mux_set_rate_parent test from clk_ops * clk-regmap: clk: versaclock7: Convert to use maple tree register cache clk: versaclock5: Convert to use maple tree register cache clk: versaclock3: Convert to use maple tree register cache clk: versaclock3: Remove redundant _is_writeable() clk: si570: Convert to use maple tree register cache clk: si544: Convert to use maple tree register cache clk: si5351: Convert to use maple tree register cache clk: si5341: Convert to use maple tree register cache clk: si514: Convert to use maple tree register cache clk: cdce925: Convert to use maple tree register cache * clk-frac-divider: clk: fractional-divider: tests: Add test suite for edge cases clk: fractional-divider: Improve approximation when zero based and export
2023-10-20clk: twl: add clock driver for TWL6032Andreas Kemnade1-0/+1
The TWL6032 has some clock outputs which are controlled like fixed-voltage regulators, in some drivers for these chips found in the wild, just the regulator api is abused for controlling them, so simply use something similar to the regulator functions. Due to a lack of hardware available for testing, leave out the TWL6030-specific part of those functions. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20230916100515.1650336-5-andreas@kemnade.info Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-10-13clk: fractional-divider: tests: Add test suite for edge casesFrank Oltmanns1-0/+1
In light of the recent discovery that the fractional divisor approximation does not utilize the full available range for clocks that are flagged CLK_FRAC_DIVIDER_ZERO_BASED [1], implement tests for the edge cases of this clock type. Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Link: https://lore.kernel.org/lkml/20230529133433.56215-1-frank@oltmanns.dev [1] Link: https://lore.kernel.org/r/20230617131041.18313-3-frank@oltmanns.dev [sboyd@kernel.org: Rename suite and tests slightly, drop unused includes, store parent rate to compare instead of repeating equation] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-31Merge branches 'clk-versa', 'clk-strdup', 'clk-amlogic', 'clk-allwinner' and ↵Stephen Boyd1-0/+1
'clk-rockchip' into clk-next - Add Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK - Introduce kstrdup_and_replace() and use it * clk-versa: clk: vc7: Use i2c_get_match_data() instead of device_get_match_data() clk: vc5: Use i2c_get_match_data() instead of device_get_match_data() clk: versaclock3: Switch to use i2c_driver's probe callback clk: Add support for versa3 clock driver dt-bindings: clock: Add Renesas versa3 clock generator bindings * clk-strdup: clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace() clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace() driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace() lib/string_helpers: Add kstrdup_and_replace() helper * clk-amlogic: (22 commits) dt-bindings: soc: amlogic: document System Control registers dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema clk: meson: axg-audio: move bindings include to main driver clk: meson: meson8b: move bindings include to main driver clk: meson: a1: move bindings include to main driver clk: meson: eeclk: move bindings include to main driver clk: meson: aoclk: move bindings include to main driver dt-bindings: clk: axg-audio-clkc: expose all clock ids dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids dt-bindings: clk: meson8b-clkc: expose all clock ids dt-bindings: clk: g12a-aoclkc: expose all clock ids dt-bindings: clk: g12a-clks: expose all clock ids dt-bindings: clk: axg-clkc: expose all clock ids dt-bindings: clk: gxbb-clkc: expose all clock ids clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS ... * clk-allwinner: clk: sunxi-ng: nkm: Prefer current parent rate clk: sunxi-ng: a64: select closest rate for pll-video0 clk: sunxi-ng: div: Support finding closest rate clk: sunxi-ng: mux: Support finding closest rate clk: sunxi-ng: nkm: Support finding closest rate clk: sunxi-ng: nm: Support finding closest rate clk: sunxi-ng: Add helper function to find closest rate clk: sunxi-ng: Add feature to find closest rate clk: sunxi-ng: a64: allow pll-mipi to set parent's rate clk: sunxi-ng: nkm: consider alternative parent rates when determining rate clk: sunxi-ng: nkm: Use correct parameter name for parent HW clk: sunxi-ng: Modify mismatched function name clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource() * clk-rockchip: clk: rockchip: rv1126: Add PD_VO clock tree clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz clk: rockchip: rk3568: Add PLL rate for 101MHz
2023-07-20clk: Add support for versa3 clock driverBiju Das1-0/+1
Add support for Renesas versa3 clock driver(5p35023). The clock generator provides 6 output clocks. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230705171000.85786-3-biju.das.jz@bp.renesas.com [sboyd@kernel.org: Add newline to printk] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-07-20clk: oxnas: remove obsolete clock driverNeil Armstrong1-1/+0
Due to lack of maintenance and stall of development for a few years now, and since no new features will ever be added upstream, remove support for OX810 and OX820 clock driver. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230630-topic-oxnas-upstream-remove-v2-1-fb6ab3dea87c@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-05clk: nuvoton: Add clock driver for ma35d1 clock controllerJacky Huang1-0/+1
The clock controller generates clocks for the whole chip, including system clocks and all peripheral clocks. This driver support ma35d1 clock gating, divider, and individual PLL configuration. There are 6 PLLs in ma35d1 SoC: - CA-PLL for the two Cortex-A35 CPU clock - SYS-PLL for system bus, which comes from the companion MCU and cannot be programmed by clock controller. - DDR-PLL for DDR - EPLL for GMAC and GFX, Display, and VDEC IPs. - VPLL for video output pixel clock - APLL for SDHC, I2S audio, and other IPs. CA-PLL has only one operation mode. DDR-PLL, EPLL, VPLL, and APLL are advanced PLLs which have 3 operation modes: integer mode, fraction mode, and spread specturm mode. Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-25Merge branches 'clk-starfive', 'clk-fractional' and 'clk-devmof' into clk-nextStephen Boyd1-1/+1
- Shrink size of clk_fractional_divider a little - Convert various clk drivers to devm_of_clk_add_hw_provider() * clk-starfive: clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers clk: starfive: Avoid casting iomem pointers MAINTAINERS: generalise StarFive clk/reset entries reset: starfive: Add StarFive JH7110 reset driver clk: starfive: Add StarFive JH7110 always-on clock driver clk: starfive: Add StarFive JH7110 system clock driver reset: starfive: jh71x0: Use 32bit I/O on 32bit registers reset: starfive: Rename "jh7100" to "jh71x0" for the common code reset: starfive: Extract the common JH71X0 reset code reset: starfive: Factor out common JH71X0 reset code reset: Create subdirectory for StarFive drivers reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE clk: starfive: Rename "jh7100" to "jh71x0" for the common code clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h clk: starfive: Factor out common JH7100 and JH7110 code clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator dt-bindings: clock: Add StarFive JH7110 system clock and reset generator * clk-fractional: clk: Remove mmask and nmask fields in struct clk_fractional_divider clk: rockchip: Remove values for mmask and nmask in struct clk_fractional_divider clk: imx: Remove values for mmask and nmask in struct clk_fractional_divider clk: Compute masks for fractional_divider clk when needed. * clk-devmof: clk: uniphier: Use managed `of_clk_add_hw_provider()` clk: si5351: Use managed `of_clk_add_hw_provider()` clk: si570: Use managed `of_clk_add_hw_provider()` clk: si514: Use managed `of_clk_add_hw_provider()` clk: lmk04832: Use managed `of_clk_add_hw_provider()` clk: hsdk-pll: Use managed `of_clk_add_hw_provider()` clk: cdce706: Use managed `of_clk_add_hw_provider()` clk: axs10x: Use managed `of_clk_add_hw_provider()` clk: axm5516: Use managed `of_clk_add_hw_provider()` clk: axi-clkgen: Use managed `of_clk_add_hw_provider()`
2023-04-25Merge branches 'clk-mediatek', 'clk-sunplus', 'clk-loongson' and ↵Stephen Boyd1-1/+3
'clk-socfpga' into clk-next - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and MT8195 SoCs - Converted most Mediatek clock drivers to struct platform_driver - MediaTek clock drivers can be built as modules - Mediatek MT8188 SoC clk drivers - Clock driver for Sunplus SP7021 SoC - Reimplement Loongson-1 clk driver with DT support - Clk driver support for Loongson-2 SoCs - Migrate socfpga clk driver to of_clk_add_hw_provider() * clk-mediatek: (84 commits) clk: mediatek: fhctl: Mark local variables static clk: mediatek: Use right match table, include mod_devicetable clk: mediatek: Add MT8188 adsp clock support clk: mediatek: Add MT8188 imp i2c wrapper clock support clk: mediatek: Add MT8188 wpesys clock support clk: mediatek: Add MT8188 vppsys1 clock support clk: mediatek: Add MT8188 vppsys0 clock support clk: mediatek: Add MT8188 vencsys clock support clk: mediatek: Add MT8188 vdosys1 clock support clk: mediatek: Add MT8188 vdosys0 clock support clk: mediatek: Add MT8188 vdecsys clock support clk: mediatek: Add MT8188 mfgcfg clock support clk: mediatek: Add MT8188 ipesys clock support clk: mediatek: Add MT8188 imgsys clock support clk: mediatek: Add MT8188 ccusys clock support clk: mediatek: Add MT8188 camsys clock support clk: mediatek: Add MT8188 infrastructure clock support clk: mediatek: Add MT8188 peripheral clock support clk: mediatek: Add MT8188 topckgen clock support clk: mediatek: Add MT8188 apmixedsys clock support ... * clk-sunplus: clk: Add Sunplus SP7021 clock driver * clk-loongson: clk: clk-loongson2: add clock controller driver support dt-bindings: clock: add loongson-2 boot clock index MAINTAINERS: remove obsolete file entry in MIPS/LOONGSON1 ARCHITECTURE MIPS: loongson32: Update the clock initialization clk: loongson1: Re-implement the clock driver clk: loongson1: Remove the outdated driver dt-bindings: clock: Add Loongson-1 clock * clk-socfpga: clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling
2023-04-05clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVEHal Feng1-1/+1
Using ARCH_FOO symbol is preferred than SOC_FOO. Set obj-y for starfive/ in Makefile, so the StarFive drivers can be compiled with COMPILE_TEST=y but ARCH_STARFIVE=n. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-27clk: clk-loongson2: add clock controller driver supportYinbo Zhu1-0/+1
This driver provides support for clock controller on Loongson-2 SoC, the Loongson-2 SoC uses a 100MHz clock as the PLL reference clock, there are five independent PLLs inside, each of which PLL can provide up to three sets of frequency dependent clock outputs. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Link: https://lore.kernel.org/r/20230323025229.2971-2-zhuyinbo@loongson.cn Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-03-27clk: si521xx: Clock driver for Skyworks Si521xx I2C PCIe clock generatorsMarek Vasut1-0/+1
Add driver for the Skyworks Si521xx PCIe clock generators. Supported models are Si52144/Si52146/Si52147, tested model is Si52144. It should be possible to add Si5213x series as well. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20230118191521.15544-2-marex@denx.de [sboyd@kernel.org: Make clk_ops const] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-03-22clk: loongson1: Re-implement the clock driverKeguang Zhang1-0/+1
Re-implement the clock driver for Loongson-1 to add devicetree support and fit into the clock framework. Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Link: https://lore.kernel.org/r/20230321111817.71756-4-keguang.zhang@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-03-22clk: loongson1: Remove the outdated driverKeguang Zhang1-1/+0
Remove the outdated driver due to the following aspects. - no DT support - duplicate code across LS1B and LS1C - does not fit into the current clock framework Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Link: https://lore.kernel.org/r/20230321111817.71756-3-keguang.zhang@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-03-21clk: Add Sunplus SP7021 clock driverQin Jian1-0/+1
Add clock driver for Sunplus SP7021 SoC. Signed-off-by: Qin Jian <qinjian@cqplus1.com> Link: https://lore.kernel.org/r/20221219015130.42621-1-qinjian@cqplus1.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: Renesas versaclock7 ccf device driverAlex Helms1-0/+1
Renesas Versaclock7 is a family of configurable clock generator ICs with fractional and integer dividers. This driver has basic support for the RC21008A device, a clock synthesizer with a crystal input and 8 outputs. The supports changing the FOD and IOD rates, and each output can be gated. Signed-off-by: Alex Helms <alexander.helms.jy@renesas.com> Link: https://lore.kernel.org/r/20220912183613.22213-3-alexander.helms.jy@renesas.com Tested-by: Saeed Nowshadi <saeed.nowshadi@amd.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-28Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Mainly driver updates this time around. There's a single patch to the core clk framework that simplifies a runtime PM call. Otherwise the majority of the diff falls to a few SoC drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new hardware support and what comes along with that is quite a few lines of data and some clk_ops code. Beyond the new hardware support we have the usual pile of driver updates that add missing clks on already supported SoCs or fix up problems like bad clk tree descriptions. It's nice to see that more drivers are moving to clk_hw based APIs too. New Drivers: - Add STM32MP13 RCC driver (Reset Clock Controller) - MediaTek MT8186 SoC clk support - Airoha EN7523 SoC system clocks - Clock driver for exynosautov9 SoC - Renesas R-Car V4H and RZ/V2M SoCs - Renesas RZ/G2UL SoC - LPASS clk driver for Qualcomm sc7280 SoC - GCC clk driver for Qualcomm SC8280XP SoC Updates: - SDCC uses floor clk ops on Qualcomm MSM8976 - Add modem reset and fix RPM clks on Qualcomm MSM8976 - Add the two missing CLKOUT clocks for U8500/DB8500 SoC - Mark some clks critical on Ingenic X1000 - Convert ux500 to clk_hw - Move MediaTek driver to clk_hw provider APIs - Use i2c driver probe_new to avoid id scans - Convert a number of Rockchip dt bindings to YAML - Mark hclk_vo critical on Rockchip rk3568 - Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage - Various cleanups like memory allocation error checks and plugged leaks - Allwinner H6 RTC clock support - Allwinner H616 32 kHz clock support - Add the Universal Flash Storage clock on Renesas R-Car S4-8 - Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas RZ/G2UL - Add display clock support on Renesas RZ/G2L - Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3 - Add 27 MHz phy PLL ref clock on i.MX - Add mcore_booted module parameter to tell kernel M core has already booted for i.MX - Remove snvs clock on i.MX because it was for secure world only - Add dt bindings for i.MX8MN GPT - Add DISP2 pixel clock for i.MX8MP - Add clkout1/2 for i.MX8MP - Fix parent clock of ubs_root_clk for i.MX8MP - Implement better RCG parking on Qualcomm SoCs using the shared RCG clk ops - Kerneldoc fixes - Switch Tegra BPMP to determine_rate clk op - Add a pointer to dt schema for generic clock bindings" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits) Revert "clk: qcom: regmap-mux: add pipe clk implementation" Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks" Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks" clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc() clk: stm32mp13: add safe mux management clk: stm32mp13: add multi mux function clk: stm32mp13: add all STM32MP13 kernel clocks clk: stm32mp13: add all STM32MP13 peripheral clocks clk: stm32mp13: manage secured clocks clk: stm32mp13: add composite clock clk: stm32mp13: add stm32 divider clock clk: stm32mp13: add stm32_gate management clk: stm32mp13: add stm32_mux clock management clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller) dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC clk: ti: clkctrl: replace usage of found with dedicated list iterator variable clk: ti: composite: Prefer kcalloc over open coded arithmetic dt-bindings: clock: exynosautov9: correct count of NR_CLK clk: mediatek: mt8173: Switch to clk_hw provider APIs clk: mediatek: Switch to clk_hw provider APIs ...
2022-05-25Merge branches 'clk-rockchip', 'clk-ingenic', 'clk-bindings', 'clk-samsung' ↵Stephen Boyd1-0/+1
and 'clk-stm' into clk-next - Mark some clks critical on Ingenic X1000 - Add STM32MP13 RCC driver (Reset Clock Controller) * clk-rockchip: dt-bindings: clock: convert rockchip,rk3368-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3228-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3036-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3308-cru.txt to YAML dt-bindings: clock: convert rockchip,px30-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3188-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3288-cru.txt to YAML dt-bindings: clock: convert rockchip,rv1108-cru.txt to YAML dt-binding: clock: Add missing rk3568 cru bindings clk: rockchip: Mark hclk_vo as critical on rk3568 dt-bindings: clock: fix rk3399 cru clock issues dt-bindings: clock: use generic node name for pmucru example in rockchip,rk3399-cru.yaml dt-bindings: clock: replace a maintainer for rockchip,rk3399-cru.yaml dt-bindings: clock: fix some conversion style issues for rockchip,rk3399-cru.yaml * clk-ingenic: clk: ingenic-tcu: Fix missing TCU clock for X1000 SoCs mips: ingenic: Do not manually reference the CPU clock clk: ingenic: Mark critical clocks in Ingenic SoCs clk: ingenic: Allow specifying common clock flags * clk-bindings: dt-bindings: clock: Replace common binding with link to schema * clk-samsung: dt-bindings: clock: exynosautov9: correct count of NR_CLK clk: samsung: exynosautov9: add cmu_peric1 clock support clk: samsung: exynosautov9: add cmu_peric0 clock support clk: samsung: exynosautov9: add cmu_fsys2 clock support clk: samsung: exynosautov9: add cmu_busmc clock support clk: samsung: exynosautov9: add cmu_peris clock support clk: samsung: exynosautov9: add cmu_core clock support clk: samsung: add top clock support for Exynos Auto v9 SoC dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings dt-bindings: clock: add clock binding definitions for Exynos Auto v9 * clk-stm: clk: stm32mp13: add safe mux management clk: stm32mp13: add multi mux function clk: stm32mp13: add all STM32MP13 kernel clocks clk: stm32mp13: add all STM32MP13 peripheral clocks clk: stm32mp13: manage secured clocks clk: stm32mp13: add composite clock clk: stm32mp13: add stm32 divider clock clk: stm32mp13: add stm32_gate management clk: stm32mp13: add stm32_mux clock management clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller) dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
2022-05-21clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)Gabriel Fernandez1-0/+1
This driver manages Reset and Clock of STM32MP13 soc. It uses a clk-stm32-core module to manage stm32 gate, mux and divider for STM32MP13 and for new future soc. All gates, muxes, dividers are identify by an index and information are stored in array (register address, shift, with, flags...) This is useful when we have two clocks with the same gate or when one mux manages two output clocks. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20220516070600.7692-3-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-23clk: en7523: Add clock driver for Airoha EN7523 SoCFelix Fietkau1-0/+1
This driver only registers fixed rate clocks, since the clocks are fully initialized by the boot loader and should not be changed later, according to Airoha. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220314084409.84394-3-nbd@nbd.name Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-04Merge branch 'remove-h8300' of git://git.infradead.org/users/hch/misc into ↵Arnd Bergmann1-1/+0
asm-generic * 'remove-h8300' of git://git.infradead.org/users/hch/misc: remove the h8300 architecture This is clearly the least actively maintained architecture we have at the moment, and probably the least useful. It is now the only one that does not support MMUs at all, and most of the boards only support 4MB of RAM, out of which the defconfig kernel needs more than half just for .text/.data. Guenter Roeck did the original patch to remove the architecture in 2013 after it had already been obsolete for a while, and Yoshinori Sato brought it back in a much more modern form in 2015. Looking at the git history since the reinstantiation, it's clear that almost all commits in the tree are build fixes or cross-architecture cleanups: $ git log --no-merges --format=%an v4.5.. arch/h8300/ | sort | uniq -c | sort -rn | head -n 12 25 Masahiro Yamada 18 Christoph Hellwig 14 Mike Rapoport 9 Arnd Bergmann 8 Mark Rutland 7 Peter Zijlstra 6 Kees Cook 6 Ingo Molnar 6 Al Viro 5 Randy Dunlap 4 Yury Norov Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-29Merge branches 'clk-range', 'clk-uniphier', 'clk-apple' and 'clk-qcom' into ↵Stephen Boyd1-0/+2
clk-next - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range - Support for NCO blocks on Apple SoCs * clk-range: clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate clk: bcm: rpi: Run some clocks at the minimum rate allowed clk: bcm: rpi: Set a default minimum rate clk: bcm: rpi: Add variant structure clk: Add clk_drop_range clk: Always set the rate on clk_set_range_rate clk: Use clamp instead of open-coding our own clk: Always clamp the rounded rate clk: Enforce that disjoints limits are invalid clk: Introduce Kunit Tests for the framework clk: Fix clk_hw_get_clk() when dev is NULL * clk-uniphier: clk: uniphier: Fix fixed-rate initialization * clk-apple: clk: clk-apple-nco: Allow and fix module building MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE clk: clk-apple-nco: Add driver for Apple NCO dt-bindings: clock: Add Apple NCO * clk-qcom: (61 commits) clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: qcom: Add display clock controller driver for SM6125 dt-bindings: clock: add QCOM SM6125 display clock bindings clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig clk: qcom: gcc: Add emac GDSC support for SM8150 clk: qcom: gcc: sm8150: Fix some identation issues clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 clk: qcom: clk-rcg2: Update the frac table for pixel clock clk: qcom: clk-rcg2: Update logic to calculate D value for RCG clk: qcom: smd: Add missing MSM8998 RPM clocks clk: qcom: smd: Add missing RPM clocks for msm8992/4 dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks clk: qcom: gcc-ipq806x: add CryptoEngine resets dt-bindings: reset: add ipq8064 ce5 resets clk: qcom: gcc-ipq806x: add CryptoEngine clocks dt-bindings: clock: add ipq8064 ce5 clk define clk: qcom: gcc-ipq806x: add additional freq for sdc table clk: qcom: clk-rcg: add clk_rcg_floor_ops ops ...
2022-03-29Merge branches 'clk-xilinx', 'clk-kunit', 'clk-cs2000' and 'clk-renesas' ↵Stephen Boyd1-0/+2
into clk-next - Kunit tests for clk-gate implementation - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode * clk-xilinx: clk: zynqmp: replace warn_once with pr_debug for failed clock ops * clk-kunit: clk: gate: Add some kunit test suites * clk-cs2000: clk: cs2000-cp: convert driver to regmap clk: cs2000-cp: freeze config during register fiddling clk: cs2000-cp: make clock skip setting configurable clk: cs2000-cp: add support for dynamic mode clk: cs2000-cp: Make aux output function controllable dt-bindings: clock: cs2000-cp: document cirrus,dynamic-mode dt-bindings: clock: cs2000-cp: document cirrus,clock-skip flag dt-bindings: clock: cs2000-cp: document aux-output-source dt-bindings: clock: convert cs2000-cp bindings to yaml * clk-renesas: dt-bindings: clock: renesas: Make example 'clocks' parsable clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: renesas: r8a779f0: Add PFC clock clk: renesas: r8a779f0: Add I2C clocks clk: renesas: r8a779f0: Add WDT clock clk: renesas: r8a779f0: Fix RSW2 clock divider clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC dt-bindings: clock: renesas: Document RZ/V2L SoC dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions clk: renesas: r8a779a0: Add CANFD module clock clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3 clk: renesas: r8a7799[05]: Add MLP clocks clk: renesas: r8a779f0: Add SYS-DMAC clocks
2022-03-19clk: rs9: Add Renesas 9-series PCIe clock generator driverMarek Vasut1-0/+1
Add driver for Renesas 9-series PCIe clock generators. This driver is designed to support 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ series I2C PCIe clock generators, currently the only tested and supported chip is 9FGV0241. The driver is capable of configuring per-chip spread spectrum mode and output amplitude, as well as per-output slew rate. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20220226040723.143705-3-marex@denx.de [sboyd@kernel.org: Use non-underscore API for fixed factor] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-12clk: clk-apple-nco: Add driver for Apple NCOMartin Povišer1-0/+1
Add a common clock driver for NCO blocks found on Apple SoCs where they are typically the generators of audio clocks. Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220208183411.61090-3-povik+lin@cutebit.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-12clk: microchip: Add driver for Microchip PolarFire SoCDaire McNamara1-1/+1
Add support for clock configuration on Microchip PolarFire SoC Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Co-developed-by: Padmarao Begari <padmarao.begari@microchip.com> Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> Co-developed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220222121143.3316880-2-conor.dooley@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-12clk: Introduce Kunit Tests for the frameworkMaxime Ripard1-0/+1
Let's test various parts of the rate-related clock API with the kunit testing framework. Cc: kunit-dev@googlegroups.com Tested-by: Daniel Latypov <dlatypov@google.com> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-3-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-23remove the h8300 architectureChristoph Hellwig1-1/+0
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-01-25clk: gate: Add some kunit test suitesStephen Boyd1-0/+1
Test various parts of the clk gate implementation with the kunit testing framework. Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Daniel Latypov <dlatypov@google.com> Cc: <kunit-dev@googlegroups.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220120175902.2165958-1-sboyd@kernel.org
2022-01-13Merge tag 'clk-for-linus' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a couple patches in the framework core this time around but they're mostly minor cleanups and some debugfs stuff. The real work that's in here is the typical pile of clk driver updates and new SoC support. Per usual (or maybe just recent trends), Qualcomm gains a handful of SoC drivers additions and has the largest diffstat. After that there are quite a few updates to the Allwinner (sunxi) drivers to support modular drivers and Renesas is heavily updated to add more support for various clks. Overall it looks pretty normal. New Drivers: - Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770 - MediaTek mt7986 SoC basic support - Clock and reset driver for Toshiba Visconti SoCs - Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8) - Allwinner D1 clks - Lan966x Generic Clock Controller driver and associated DT bindings - Qualcomm SDX65, SM8450, and MSM8976 GCC clks - Qualcomm SDX65 and SM8450 RPMh clks Updates: - Set suppress_bind_attrs to true for i.MX8ULP driver - Switch from do_div to div64_ul for throughout all i.MX drivers - Fix imx8mn_clko1_sels for i.MX8MN - Remove unused IPG_AUDIO_ROOT from i.MX8MP - Switch parent for audio_root_clk to audio ahb in i.MX8MP driver - Removal of all remaining uses of __clk_lookup() in drivers/clk/samsung - Refactoring of the CPU clocks registration to use common interface - An update of the Exynos850 driver (support for more clock domains) required by the E850-96 development board - Prep for runtime PM and generic power domains on Tegra - Support modular Allwinner clk drivers via platform bus - Lan966x clock driver extended to support clock gating - Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and thermal (TSU) clocks and resets on Renesas RZ/G2L - Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2 clock drivers, and in the Renesas SDHI driver - Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable - Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add GPU clock and resets on Renesas RZ/G2L - Add clk-provider.h to various Qualcomm clk drivers - devm version of clk_hw_register_gate() - kerneldoc fixes in a couple drivers" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits) clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup() clk: mediatek: add mt7986 clock support clk: mediatek: add mt7986 clock IDs dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper clk: x86: Fix clk_gate_flags for RV_CLK_GATE clk: x86: Use dynamic con_id string during clk registration ACPI: APD: Add a fmw property clk-name drivers: acpi: acpi_apd: Remove unused device property "is-rv" x86: clk: clk-fch: Add support for newer family of AMD's SOC clk: ingenic: Add MDMA and BDMA clocks dt-bindings: clk/ingenic: Add MDMA and BDMA clocks clk: bm1880: remove kfrees on static allocations clk: Drop unused COMMON_CLK_STM32MP157_SCMI config clk: st: clkgen-mux: search reg within node or parent clk: st: clkgen-fsyn: search reg within node or parent clk: Enable/Disable runtime PM for clk_summary MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller clk: visconti: Add support common clock driver and reset driver ...
2022-01-12Merge branches 'clk-socfpga', 'clk-toshiba', 'clk-st' and 'clk-bitmain' into ↵Stephen Boyd1-0/+1
clk-next - Clock and reset driver for Toshiba Visconti SoCs * clk-socfpga: clk: socfpga: s10: Make use of the helper function devm_platform_ioremap_resource() clk: socfpga: agilex: Make use of the helper function devm_platform_ioremap_resource() clk: socfpga: remove redundant assignment after a mask operation clk: socfpga: remove redundant assignment on division * clk-toshiba: clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup() MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller clk: visconti: Add support common clock driver and reset driver dt-bindings: clock: Add DT bindings for SMU of Toshiba Visconti TMPV770x SoC dt-bindings: clock: Add DT bindings for PLL of Toshiba Visconti TMPV770x SoC * clk-st: clk: Drop unused COMMON_CLK_STM32MP157_SCMI config clk: st: clkgen-mux: search reg within node or parent clk: st: clkgen-fsyn: search reg within node or parent * clk-bitmain: clk: bm1880: remove kfrees on static allocations
2022-01-12Merge branches 'clk-x86', 'clk-stm', 'clk-amlogic' and 'clk-allwinner' into ↵Stephen Boyd1-1/+2
clk-next * clk-x86: clk: x86: Fix clk_gate_flags for RV_CLK_GATE clk: x86: Use dynamic con_id string during clk registration ACPI: APD: Add a fmw property clk-name drivers: acpi: acpi_apd: Remove unused device property "is-rv" x86: clk: clk-fch: Add support for newer family of AMD's SOC clk: Introduce clk-tps68470 driver platform/x86: int3472: Deal with probe ordering issues platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell platform/x86: int3472: Add get_sensor_adev_and_name() helper platform/x86: int3472: Split into 2 drivers platform_data: Add linux/platform_data/tps68470.h file i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function i2c: acpi: Use acpi_dev_ready_for_enumeration() helper ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device * clk-stm: clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell * clk-amlogic: clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB * clk-allwinner: clk: sunxi-ng: Add support for the D1 SoC clocks clk: sunxi-ng: gate: Add macros for gates with fixed dividers clk: sunxi-ng: mux: Add macros using clk_parent_data and clk_hw clk: sunxi-ng: mp: Add macros using clk_parent_data and clk_hw clk: sunxi-ng: div: Add macros using clk_parent_data and clk_hw dt-bindings: clk: Add compatibles for D1 CCUs clk: sunxi-ng: Allow the CCU core to be built as a module clk: sunxi-ng: Convert early providers to platform drivers clk: sunxi-ng: Allow drivers to be built as modules clk: sunxi-ng: Export symbols used by CCU drivers
2022-01-06clk: visconti: Add support common clock driver and reset driverNobuhiro Iwamatsu1-0/+1
Add support for common interface of the common clock and reset driver for Toshiba Visconti5 and its SoC, TMPV7708. The PIPLLCT provides the PLL, and the PISMU provides clock and reset functionality. Each drivers are provided in this patch. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20211025031038.4180686-4-nobuhiro1.iwamatsu@toshiba.co.jp [sboyd@kernel.org: Add bitfield.h include to pll.c] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-12-16clk: starfive: Add JH7100 clock generator driverGeert Uytterhoeven1-0/+1
Add a driver for the StarFive JH7100 clock generator. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Co-developed-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
2021-12-16clk: Introduce clk-tps68470 driverHans de Goede1-0/+1
The TPS68470 PMIC provides Clocks, GPIOs and Regulators. At present in the kernel the Regulators and Clocks are controlled by an OpRegion driver designed to work with power control methods defined in ACPI, but some platforms lack those methods, meaning drivers need to be able to consume the resources of these chips through the usual frameworks. This commit adds a driver for the clocks provided by the tps68470, and is designed to bind to the platform_device registered by the intel_skl_int3472 module. This is based on this out of tree driver written by Intel: https://github.com/intel/linux-intel-lts/blob/4.14/base/drivers/clk/clk-tps68470.c with various cleanups added. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211203102857.44539-7-hdegoede@redhat.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-12-08clk: lan966x: Add lan966x SoC clock driverKavyasree Kotagiri1-0/+1
This adds Generic Clock Controller driver for lan966x SoC. Lan966x clock controller contains 3 PLLs - cpu_clk, ddr_clk and sys_clk. It generates and supplies clock to various peripherals within SoC. Register settings required to provide GCK clocking to a peripheral is as below: GCK_SRC_SEL = Select clock source. GCK_PRESCALER = Set divider value. GCK_ENA = 1 - Enable GCK clock. Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> Co-developed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20211103061935.25677-4-kavyasree.kotagiri@microchip.com
2021-11-23clk: sunxi-ng: Allow the CCU core to be built as a moduleSamuel Holland1-1/+1
Like the individual CCU drivers, it can be beneficial for memory consumption of cross-platform configurations to only load the CCU core on the relevant platform. For example, a generic arm64 kernel sees the following improvement when building the CCU core and drivers as modules: before: text data bss dec hex filename 13882360 5251670 360800 19494830 12977ae vmlinux after: text data bss dec hex filename 13734787 5086442 360800 19182029 124b1cd vmlinux So the result is a 390KB total reduction in kernel image size. The one early clock provider (sun5i) requires the core to be built in. Now that loading the MMC driver will trigger loading the CCU core, the MMC timing mode functions do not need a compile-time fallback. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-5-samuel@sholland.org
2021-08-12clk: pistachio: Make it selectable for generic MIPS kernelJiaxun Yang1-1/+1
We're moving pistachio to generic MIPS kernel. The clk driver should be avilable to the generic MIPS kernel. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-29Merge branches 'clk-lmk04832', 'clk-stm', 'clk-rohm', 'clk-actions' and ↵Stephen Boyd1-0/+1
'clk-ingenic' into clk-next - Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs - Support secure mode of STM32MP1 SoCs - Improve clock support for Actions S500 SoC * clk-lmk04832: clk: lmk04832: Use of match table clk: lmk04832: Depend on SPI clk: lmk04832: add support for digital delay clk: add support for the lmk04832 dt-bindings: clock: add ti,lmk04832 bindings * clk-stm: clk: stm32mp1: new compatible for secure RCC support dt-bindings: clock: stm32mp1 new compatible for secure rcc dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15 dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15 dt-bindings: clock: add IDs for SCMI clocks on stm32mp15 reset: stm32mp1: remove stm32mp1 reset clk: stm32mp1: move RCC reset controller into RCC clock driver clk: stm32mp1: convert to module driver clk: stm32mp1: remove intermediate pll clocks clk: stm32mp1: merge 'ck_hse_rtc' and 'ck_rtc' into one clock clk: stm32mp1: merge 'clk-hsi-div' and 'ck_hsi' into one clock * clk-rohm: clk: bd718xx: Drop BD70528 support * clk-actions: clk: actions: Add NIC and ETHERNET clock support for Actions S500 SoC dt-bindings: clock: Add NIC and ETHERNET bindings for Actions S500 SoC clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC clk: actions: Fix SD clocks factor table on Owl S500 SoC clk: actions: Fix UART clock dividers on Owl S500 SoC * clk-ingenic: clk: ingenic: Add support for the JZ4760 clk: ingenic: Support overriding PLLs M/N/OD calc algorithm clk: ingenic: Remove pll_info.no_bypass_bit clk: ingenic: Read bypass register only when there is one clk: Support bypassing dividers dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles
2021-06-28clk: add support for the lmk04832Liam Beguin1-0/+1
The LMK04832 is an ultra-high performance clock conditioner with JEDEC JESD204B support and is also pin compatible with the LMK0482x family of devices. Signed-off-by: Liam Beguin <lvb@xiphos.com> Link: https://lore.kernel.org/r/20210423004057.283926-2-liambeguin@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08clkdev: remove CONFIG_CLKDEV_LOOKUPArnd Bergmann1-2/+1
This option is now synonymous with CONFIG_HAVE_CLK, so use the latter globally. Any out-of-tree platform ports that still use a private clk_get()/clk_put() implementation should move to CONFIG_COMMON_CLK. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-29Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Here's a collection of largely clk driver updates. The usual suspects are here: i.MX, Qualcomm, Renesas, Allwinner, Samsung, and Rockchip, but it feels pretty light on commits. There's only one real commit to the framework core and that's to consolidate code. Otherwise the diffstat is dominated by many Qualcomm clk driver patches that modernize the driver for the proper way of speciying clk parents. That's shifting data around, which could subtly break things so I'll be on the lookout for fixes. New Drivers: - Proper clk driver for Mediatek MT7621 SoCs - Support for the clock controller on the new Rockchip rk3568 Updates: - Simplify Zynq Kconfig dependencies - Use clk_hw pointers in socfpga driver - Cleanup parent data in qcom clk drivers - Some cleanups for rk3399 modularization - Fix reparenting of i.MX UART clocks by initializing only the ones associated to stdout - Correct the PCIE clocks for i.MX8MP and i.MX8MQ - Make i.MX LPCG and SCU clocks return on registering failure - Kernel doc fixes - Add DAB hardware accelerator clocks on Renesas R-Car E3 and M3-N - Add timer (TMU) clocks on Renesas R-Car H3 ES1.0 - Add Timer (TMU & CMT) and thermal sensor (TSC) clocks on Renesas R-Car V3U - Sigma-delta modulation on Allwinner V3s audio PLL" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (82 commits) MAINTAINERS: add MT7621 CLOCK maintainer staging: mt7621-dts: use valid vendor 'mediatek' instead of invalid 'mtk' staging: mt7621-dts: make use of new 'mt7621-clk' clk: ralink: add clock driver for mt7621 SoC clk: uniphier: Fix potential infinite loop clk: qcom: rpmh: add support for SDX55 rpmh IPA clock clk: qcom: gcc-sdm845: get rid of the test clock clk: qcom: convert SDM845 Global Clock Controller to parent_data dt-bindings: clock: separate SDM845 GCC clock bindings clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE dt: bindings: add mt7621-sysc device tree binding documentation dt-bindings: clock: add dt binding header for mt7621 clocks clk: samsung: Remove redundant dev_err calls clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback clk: zynqmp: Drop dependency on ARCH_ZYNQMP clk: zynqmp: Enable the driver if ZYNQMP_FIRMWARE is selected clk: qcom: gcc-sm8350: use ARRAY_SIZE instead of specifying num_parents ...
2021-04-13clk: ralink: add clock driver for mt7621 SoCSergio Paracuellos1-0/+1
The documentation for this SOC only talks about two registers regarding to the clocks: * SYSC_REG_CPLL_CLKCFG0 - provides some information about boostrapped refclock. PLL and dividers used for CPU and some sort of BUS. * SYSC_REG_CPLL_CLKCFG1 - a banch of gates to enable/disable clocks for all or some ip cores. Looking into driver code, and some openWRT patched there are another frequencies which are used in some drivers (uart, sd...). According to all of this information the clock plan for this SoC is set as follows: - Main top clock "xtal" from where all the rest of the world is derived. - CPU clock "cpu" derived from "xtal" frequencies and a bunch of register reads and predividers. - BUS clock "bus" derived from "cpu" and with (cpu / 4) MHz. - Fixed clocks from "xtal": * "50m": 50 MHz. * "125m": 125 MHz. * "150m": 150 MHz. * "250m": 250 MHz. * "270m": 270 MHz. We also have a buch of gate clocks with their parents: * "hsdma": "150m" * "fe": "250m" * "sp_divtx": "270m" * "timer": "50m" * "pcm": "270m" * "pio": "50m" * "gdma": "bus" * "nand": "125m" * "i2c": "50m" * "i2s": "270m" * "spi": "bus" * "uart1": "50m" * "uart2": "50m" * "uart3": "50m" * "eth": "50m" * "pcie0": "125m" * "pcie1": "125m" * "pcie2": "125m" * "crypto": "250m" * "shxc": "50m" With this information the clk driver will provide clock and gates functionality from a a set of hardcoded clocks allowing to define a nice device tree without fixed clocks. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210410055059.13518-2-sergio.paracuellos@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-03-23clk: socfpga: allow compile testing of Stratix 10 / Agilex clocksKrzysztof Kozlowski1-1/+1
The Stratix 10 / Agilex / N5X clocks do not use anything other than OF or COMMON_CLK so they should be compile testable on most of the platforms. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-23arm64: socfpga: merge Agilex and N5X into ARCH_INTEL_SOCFPGAKrzysztof Kozlowski1-2/+0
Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and SoC-part. Up to a point that N5X uses the same DTSI as Agilex. From the Linux kernel point of view these are flavors of the same architecture so there is no need for three top-level arm64 architectures. Simplify this by merging all three architectures into ARCH_INTEL_SOCFPGA and dropping the other ARCH* arm64 Kconfig entries. The side effect is that the INTEL_STRATIX10_SERVICE will now be available for both 32-bit and 64-bit Intel SoCFPGA, even though it is used only for 64-bit. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-23clk: socfpga: merge ARCH_SOCFPGA and ARCH_STRATIX10Krzysztof Kozlowski1-2/+1
Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only one for both of them. This the common practice for other platforms. Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come from multiple vendors. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-23clk: socfpga: allow building N5X clocks with ARCH_N5XKrzysztof Kozlowski1-0/+1
The Intel's eASIC N5X (ARCH_N5X) architecture shares a lot with Agilex (ARCH_AGILEX) so it uses the same socfpga_agilex.dtsi, with minor changes. Also the clock drivers are the same. However the clock drivers won't be build without ARCH_AGILEX. One could assume that ARCH_N5X simply depends on ARCH_AGILEX but this was not modeled in Kconfig. In current stage the ARCH_N5X is simply unbootable. Add a separate Kconfig entry for clocks used by both ARCH_N5X and ARCH_AGILEX so the necessary objects will be built if either of them is selected. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-02-26Merge tag 'riscv-for-linus-5.12-mw0' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...
2021-02-23clk: Add RISC-V Canaan Kendryte K210 clock driverDamien Le Moal1-0/+1
Add a clock provider driver for the Canaan Kendryte K210 RISC-V SoC. This new driver with the compatible string "canaan,k210-clk" implements support for the full clock structure of the K210 SoC. Since it is required for the correct operation of the SoC, this driver is selected by default for compilation when the SOC_CANAAN option is selected. With this change, the k210-sysctl driver is turned into a simple platform driver which enables its power bus clock and triggers populating its child nodes. The sysctl driver retains the SOC early initialization code, but the implementation now relies on the new function k210_clk_early_init() provided by the new clk-k210 driver. The clock structure implemented and many of the coding ideas for the driver come from the work by Sean Anderson on the K210 support for the U-Boot project. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-17Merge branches 'clk-socfpga', 'clk-mstar', 'clk-qcom' and 'clk-warnings' ↵Stephen Boyd1-0/+1
into clk-next - PLL support on MStar/SigmaStar ARMv7 SoCs - CPU clks for Qualcomm SDX55 - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs - GCC clks for Qualcomm SM8350 - Video clk fixups on Qualcomm SM8250 - GPU clks for Qualcomm SDM660/SDM630 - Improvements for multimedia clks on Qualcomm MSM8998 - Fix many warnings with W=1 enabled builds under drivers/clk/ * clk-socfpga: clk: socfpga: agilex: add clock driver for eASIC N5X platform dt-bindings: documentation: add clock bindings information for eASIC N5X * clk-mstar: clk: mstar: msc313-mpll: Fix format specifier clk: mstar: Allow MStar clk drivers to be compile tested clk: mstar: MStar/SigmaStar MPLL driver clk: fixed: add devm helper for clk_hw_register_fixed_factor() dt-bindings: clk: mstar msc313 mpll binding description dt-bindings: clk: mstar msc313 mpll binding header * clk-qcom: (42 commits) clk: qcom: Add Global Clock controller (GCC) driver for SC7280 dt-bindings: clock: Add SC7280 GCC clock binding clk: qcom: rpmh: Add support for RPMH clocks on SC7280 dt-bindings: clock: Add RPMHCC bindings for SC7280 clk: qcom: gcc-sm8350: add gdsc dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc clk: qcom: gdsc: Implement NO_RET_PERIPH flag clk: qcom: mmcc-msm8998: Set bimc_smmu_gdsc always on clk: qcom: mmcc-msm8998: Add hardware clockgating registers to some clks clk: qcom: gcc-msm8998: Fix Alpha PLL type for all GPLLs clk: qcom: gcc-msm8998: Mark gpu_cfg_ahb_clk as critical ... * clk-warnings: (27 commits) clk: zynq: clkc: Remove various instances of an unused variable 'clk' clk: versatile: clk-icst: Fix worthy struct documentation block clk: ti: gate: Fix possible doc-rot in 'omap36xx_gate_clk_enable_with_hsdiv_restore' clk: ti: dpll: Fix misnaming of '_register_dpll()'s 'user' parameter clk: ti: clockdomain: Fix description for 'omap2_init_clk_clkdm's hw param clk: st: clkgen-fsyn: Fix worthy struct documentation demote partially filled one clk: st: clkgen-pll: Demote unpopulated kernel-doc header clk: mvebu: ap-cpu-clk: Demote non-conformant kernel-doc header clk: socfpga: clk-pll-a10: Remove set but unused variable 'rc' clk: socfpga: clk-pll: Remove unused variable 'rc' clk: sifive: fu540-prci: Declare static const variable 'prci_clk_fu540' where it's used clk: bcm: clk-iproc-pll: Demote kernel-doc abuse clk: zynqmp: divider: Add missing description for 'max_div' clk: spear: Move prototype to accessible header clk: qcom: clk-rpm: Remove a bunch of superfluous code clk: clk-xgene: Add description for 'mask' and fix formatting for 'flags' clk: qcom: mmcc-msm8974: Remove unused static const tables 'mmcc_xo_mmpll0_1_2_gpll0{map}' clk: clk-npcm7xx: Remove unused static const tables 'npcm7xx_gates' and 'npcm7xx_divs_fx' clk: clk-fixed-mmio: Demote obvious kernel-doc abuse clk: qcom: gcc-ipq4019: Remove unused variable 'ret' ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-19 16:15:14 +0300