| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 6e9722e9a7bfe1bbad649937c811076acf86e1fd upstream.
'name_size' does not have any range checks, and it just directly indexes
with TPM_ALG_ID, which could lead into memory corruption at worst.
Address the issue by only processing known values and returning -EINVAL for
unrecognized values.
Make also 'tpm_buf_append_name' and 'tpm_buf_fill_hmac_session' fallible so
that errors are detected before causing any spurious TPM traffic.
End also the authorization session on failure in both of the functions, as
the session state would be then by definition corrupted.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 1085b8276bb4 ("tpm: Add the rest of the session HMAC API")
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5326ab737a47278dbd16ed3ee7380b26c7056ddd upstream.
According to section 5.3.6.2 (Multiport Device Operation) of the virtio
spec(version 1.2) a control buffer with the event VIRTIO_CONSOLE_RESIZE
is followed by a virtio_console_resize struct containing cols then rows.
The kernel implements this the wrong way around (rows then cols) resulting
in the two values being swapped.
Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com>
Message-Id: <20250324144300.905535-1-maxbr@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Filip Hejsek <filip.hejsek@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bda1cbf73c6e241267c286427f2ed52b5735d872 ]
tpm2_read_public() has some rudimentary range checks but the function does
not ensure that the response buffer has enough bytes for the full TPMT_HA
payload.
Re-implement the function with necessary checks and validation, and return
name and name size for all handle types back to the caller.
Cc: stable@vger.kernel.org # v6.10+
Fixes: d0a25bb961e6 ("tpm: Add HMAC session name/handle append")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
[ different semantics around u8 name_size() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 82d12088c297fa1cef670e1718b3d24f414c23f7 upstream.
Discovered by Atuin - Automated Vulnerability Discovery Engine.
In ac_ioctl, the validation of IndexCard and the check for a valid
RamIO pointer are skipped when cmd is 6. However, the function
unconditionally executes readb(apbs[IndexCard].RamIO + VERS) at the
end.
If cmd is 6, IndexCard may reference a board that does not exist
(where RamIO is NULL), leading to a NULL pointer dereference.
Fix this by skipping the readb access when cmd is 6, as this
command is a global information query and does not target a specific
board context.
Signed-off-by: Tianchu Chen <flynnnchen@tencent.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20251128155323.a786fde92ebb926cbe96fcb1@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit faf07e611dfa464b201223a7253e9dc5ee0f3c9e upstream.
tpm2_get_pcr_allocation() does not cap any upper limit for the number of
banks. Cap the limit to eight banks so that out of bounds values coming
from external I/O cause on only limited harm.
Cc: stable@vger.kernel.org # v5.10+
Fixes: bcfff8384f6c ("tpm: dynamically allocate the allocated_banks array")
Tested-by: Lai Yi <yi1.lai@linux.intel.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6bd30d8fc523fb880b4be548e8501bc0fe8f42d4 ]
channel_handler() sets intf->channels_ready to true but never
clears it, so __scan_channels() skips any rescan. When the BMC
firmware changes a rescan is required. Allow it by clearing
the flag before starting a new scan.
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Message-ID: <20250930074239.2353-3-guojinhui.liam@bytedance.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 936750fdba4c45e13bbd17f261bb140dd55f5e93 ]
The race window between __scan_channels() and deliver_response() causes
the parameters of some channels to be set to 0.
1.[CPUA] __scan_channels() issues an IPMI request and waits with
wait_event() until all channels have been scanned.
wait_event() internally calls might_sleep(), which might
yield the CPU. (Moreover, an interrupt can preempt
wait_event() and force the task to yield the CPU.)
2.[CPUB] deliver_response() is invoked when the CPU receives the
IPMI response. After processing a IPMI response,
deliver_response() directly assigns intf->wchannels to
intf->channel_list and sets intf->channels_ready to true.
However, not all channels are actually ready for use.
3.[CPUA] Since intf->channels_ready is already true, wait_event()
never enters __wait_event(). __scan_channels() immediately
clears intf->null_user_handler and exits.
4.[CPUB] Once intf->null_user_handler is set to NULL, deliver_response()
ignores further IPMI responses, leaving the remaining
channels zero-initialized and unusable.
CPUA CPUB
------------------------------- -----------------------------
__scan_channels()
intf->null_user_handler
= channel_handler;
send_channel_info_cmd(intf,
0);
wait_event(intf->waitq,
intf->channels_ready);
do {
might_sleep();
deliver_response()
channel_handler()
intf->channel_list =
intf->wchannels + set;
intf->channels_ready = true;
send_channel_info_cmd(intf,
intf->curr_channel);
if (condition)
break;
__wait_event(wq_head,
condition);
} while(0)
intf->null_user_handler
= NULL;
deliver_response()
if (!msg->user)
if (intf->null_user_handler)
rv = -EINVAL;
return rv;
------------------------------- -----------------------------
Fix the race between __scan_channels() and deliver_response() by
deferring both the assignment intf->channel_list = intf->wchannels
and the flag intf->channels_ready = true until all channels have
been successfully scanned or until the IPMI request has failed.
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Message-ID: <20250930074239.2353-2-guojinhui.liam@bytedance.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 31b636d2c41613e3bd36256a4bd53e9dacfa2677 ]
When this was first reported [1], the possibility of having sufficient
number of dynamic misc devices was theoretical, in the case of dlm driver.
In practice, its userspace never created more than one device.
What we know from commit ab760791c0cf ("char: misc: Increase the maximum
number of dynamic misc devices to 1048448"), is that the miscdevice
interface has been used for allocating more than the single-shot devices it
was designed for. And it is not only coresight_tmc, but many other drivers
are able to create multiple devices.
On systems like the ones described in the above commit, it is certain that
the dynamic allocation will allocate certain reserved minor numbers,
leading to failures when a later driver tries to claim its reserved number.
Instead of excluding the historically statically allocated range from
dynamic allocation, restrict the latter to minors above 255. That also
removes the need for DYNAMIC_MINORS and the convolution in allocating minor
numbers, simplifying the code.
Since commit ab760791c0cf ("char: misc: Increase the maximum number of
dynamic misc devices to 1048448") has been applied, such range is already
possible. And given such devices already need to be dynamically created,
there should be no systems where this might become a problem.
[1] https://lore.kernel.org/all/1257813017-28598-3-git-send-email-cascardo@holoscopio.com/
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20250423-misc-dynrange-v4-1-133b5ae4ca18@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e28022873c0d051e980c4145f1965cab5504b498 ]
Currently, misc_deregister() uses list_del() to remove the device
from the list. After list_del(), the list pointers are set to
LIST_POISON1 and LIST_POISON2, which may help catch use-after-free bugs,
but does not reset the list head.
If misc_deregister() is called more than once on the same device,
list_empty() will not return true, and list_del() may be called again,
leading to undefined behavior.
Replace list_del() with list_del_init() to reinitialize the list head
after deletion. This makes the code more robust against double
deregistration and allows safe usage of list_empty() on the miscdevice
after deregistration.
[ Note, this seems to keep broken out-of-tree drivers from doing foolish
things. While this does not matter for any in-kernel drivers,
external drivers could use a bit of help to show them they shouldn't
be doing stuff like re-registering misc devices - gregkh ]
Signed-off-by: Xion Wang <xion.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250904063714.28925-2-xion.wang@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1ba0fb42aa6a5f072b1b8c0b0520b32ad4ef4b45 ]
misc_open() may request module for miscdevice with dynamic minor, which
is meaningless since:
- The dynamic minor allocated is unknown in advance without registering
miscdevice firstly.
- Macro MODULE_ALIAS_MISCDEV() is not applicable for dynamic minor.
Fix by only requesting module for miscdevice with fixed minor.
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250714-rfc_miscdev-v6-6-2ed949665bde@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 52e2bb5ff089d65e2c7d982fe2826dc88e473d50 ]
For miscdevice who wants dynamic minor, it may fail to be registered again
without reinitialization after being de-registered, which is illustrated
by kunit test case miscdev_test_dynamic_reentry() newly added.
There is a real case found by cascardo when a part of minor range were
contained by range [0, 255):
1) wmi/dell-smbios registered minor 122, and acpi_thermal_rel registered
minor 123
2) unbind "int3400 thermal" driver from its device, this will de-register
acpi_thermal_rel
3) rmmod then insmod dell_smbios again, now wmi/dell-smbios is using minor
123
4) bind the device to "int3400 thermal" driver again, acpi_thermal_rel
fails to register.
Some drivers may reuse the miscdevice structure after they are deregistered
If the intention is to allocate a dynamic minor, if the minor number is not
reset to MISC_DYNAMIC_MINOR before calling misc_register(), it will try to
register a previously dynamically allocated minor number, which may have
been registered by a different driver.
One such case is the acpi_thermal_rel misc device, registered by the
int3400 thermal driver. If the device is unbound from the driver and later
bound, if there was another dynamic misc device registered in between, it
would fail to register the acpi_thermal_rel misc device. Other drivers
behave similarly.
Actually, this kind of issue is prone to happen if APIs
misc_register()/misc_deregister() are invoked by driver's
probe()/remove() separately.
Instead of fixing all the drivers, just reset the minor member to
MISC_DYNAMIC_MINOR in misc_deregister() in case it was a dynamically
allocated minor number, as error handling of misc_register() does.
Cc: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250714-rfc_miscdev-v6-5-2ed949665bde@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e2c69490dda5d4c9f1bfbb2898989c8f3530e354 upstream
Prior to commit b52da4054ee0 ("ipmi: Rework user message limit handling"),
i_ipmi_request() used to increase the user reference counter if the receive
message is provided by the caller of IPMI API functions. This is no longer
the case. However, ipmi_free_recv_msg() is still called and decreases the
reference counter. This results in the reference counter reaching zero,
the user data pointer is released, and all kinds of interesting crashes are
seen.
Fix the problem by increasing user reference counter if the receive message
has been provided by the caller.
Fixes: b52da4054ee0 ("ipmi: Rework user message limit handling")
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20251006201857.3433837-1-linux@roeck-us.net>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b52da4054ee0bf9ecb44996f2c83236ff50b3812 upstream
This patch required quite a bit of work to backport due to a number
of unrelated changes that do not make sense to backport. This has
been run against my test suite and passes all tests.
The limit on the number of user messages had a number of issues,
improper counting in some cases and a use after free.
Restructure how this is all done to handle more in the receive message
allocation routine, so all refcouting and user message limit counts
are done in that routine. It's a lot cleaner and safer.
Reported-by: Gilles BULOZ <gilles.buloz@kontron.com>
Closes: https://lore.kernel.org/lkml/aLsw6G0GyqfpKs2S@mail.minyard.net/
Fixes: 8e76741c3d8b ("ipmi: Add a limit on the number of users that may use IPMI")
Cc: <stable@vger.kernel.org> # 4.19
Signed-off-by: Corey Minyard <corey@minyard.net>
Tested-by: Gilles BULOZ <gilles.buloz@kontron.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5d09ee1bec870263f4ace439402ea840503b503b upstream.
This reverts commit c608966f3f9c2dca596967501d00753282b395fc.
This patch has a subtle bug that can cause the IPMI driver to go into an
infinite loop if the BMC misbehaves in a certain way. Apparently
certain BMCs do misbehave this way because several reports have come in
recently about this.
Signed-off-by: Corey Minyard <corey@minyard.net>
Tested-by: Eric Hagberg <ehagberg@janestreet.com>
Cc: <stable@vger.kernel.org> # 6.2
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8a81236f2cb0882c7ea6c621ce357f7f3f601fe5 ]
The tpm_tis_write8() call specifies arguments in wrong order. Should be
(data, addr, value) not (data, value, addr). The initial correct order
was changed during the major refactoring when the code was split.
Fixes: 41a5e1cf1fe1 ("tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phy")
Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Justinien Bouron <jbouron@amazon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4bddf4587c131d7b8ce8952cd32b284dcda0dd1f upstream.
After reading all the feedback, right now disabling the TPM2_TCG_HMAC
is the right call.
Other views discussed:
A. Having a kernel command-line parameter or refining the feature
otherwise. This goes to the area of improvements. E.g., one
example is my own idea where the null key specific code would be
replaced with a persistent handle parameter (which can be
*unambigously* defined as part of attestation process when
done correctly).
B. Removing the code. I don't buy this because that is same as saying
that HMAC encryption cannot work at all (if really nitpicking) in
any form. Also I disagree on the view that the feature could not
be refined to something more reasoable.
Also, both A and B are worst options in terms of backporting.
Thuss, this is the best possible choice.
Cc: stable@vger.kernel.or # v6.10+
Fixes: d2add27cf2b8 ("tpm: Add NULL primary creation")
Suggested-by: Chris Fenner <cfenn@google.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 612b1dfeb414dfa780a6316014ceddf9a74ff5c0 ]
Fix division by zero in ks_sa_rng_init caused by missing clock
pointer initialization. The clk_get_rate() call is performed on
an uninitialized clk pointer, resulting in division by zero when
calculating delay values.
Add clock initialization code before using the clock.
Fixes: 6d01d8511dce ("hwrng: ks-sa - Add minimum sleep time before ready-polling")
Signed-off-by: Nishanth Menon <nm@ti.com>
drivers/char/hw_random/ks-sa-rng.c | 7 +++++++
1 file changed, 7 insertions(+)
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit efaa2d815a0e4d1c06750e587100f6f7f4ee5497 ]
Compile-testing this driver is only possible when the AMBA bus driver is
available in the kernel:
x86_64-linux-ld: drivers/char/hw_random/nomadik-rng.o: in function `nmk_rng_remove':
nomadik-rng.c:(.text+0x67): undefined reference to `amba_release_regions'
x86_64-linux-ld: drivers/char/hw_random/nomadik-rng.o: in function `nmk_rng_probe':
nomadik-rng.c:(.text+0xee): undefined reference to `amba_request_regions'
x86_64-linux-ld: nomadik-rng.c:(.text+0x18d): undefined reference to `amba_release_regions'
The was previously implied by the 'depends on ARCH_NOMADIK', but needs to be
specified for the COMPILE_TEST case.
Fixes: d5e93b3374e4 ("hwrng: Kconfig - Add helper dependency on COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ffcb7560b4a15faf821df95e3ab532b2b020f8c ]
The source and destination of some strcpy operations was the same.
Split out the part of the operations that needed to be done for those
particular calls so the unnecessary copy wasn't done.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506140756.EFXXvIP4-lkp@intel.com/
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ec50ec378e3fd83bde9b3d622ceac3509a60b6b5 ]
During BMC firmware upgrades on live systems, the ipmi_msghandler
generates excessive "BMC returned incorrect response" warnings
while the BMC is temporarily offline. This can flood system logs
in large deployments.
Replace dev_warn() with dev_warn_ratelimited() to throttle these
warnings and prevent log spam during BMC maintenance operations.
Signed-off-by: Breno Leitao <leitao@debian.org>
Message-ID: <20250710-ipmi_ratelimit-v1-1-6d417015ebe9@debian.org>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ef1fe4bc38673db72e39b700b29c50dfcc5a415 ]
misc_init() returns -EIO for __register_chrdev() invocation failure, but:
- -EIO is for I/O error normally, but __register_chrdev() does not do I/O.
- -EIO can not cover various error codes returned by __register_chrdev().
Fix by returning error code of __register_chrdev().
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250620-fix_mischar-v1-3-6c2716bbf1fa@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 522a242a18adc5c63a24836715dbeec4dc3faee1 ]
Although unlikely, devm_pm_runtime_enable() call might fail, so handle
the return value.
Fixes: 78cb66caa6ab ("hwrng: mtk - Use devm_pm_runtime_enable")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fa332f5dc6fc662ad7d3200048772c96b861cf6b upstream.
The "intf" list iterator is an invalid pointer if the correct
"intf->intf_num" is not found. Calling atomic_dec(&intf->nr_users) on
and invalid pointer will lead to memory corruption.
We don't really need to call atomic_dec() if we haven't called
atomic_add_return() so update the if (intf->in_shutdown) path as well.
Fixes: 8e76741c3d8b ("ipmi: Add a limit on the number of users that may use IPMI")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <aBjMZ8RYrOt6NOgi@stanley.mountain>
Signed-off-by: Corey Minyard <corey@minyard.net>
[ - Dropped change to the `if (intf->in_shutdown)` block since that logic
doesn't exist yet.
- Modified out_unlock to release the srcu lock instead of the mutex
since we don't have the mutex here yet. ]
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 32d495b384a2db7d23c2295e03e6b6edb1c0db8d ]
Fix Smatch-detected issue:
drivers/char/tpm/tpm-buf.c:208 tpm_buf_read_u8() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:225 tpm_buf_read_u16() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:242 tpm_buf_read_u32() error:
uninitialized symbol 'value'.
Zero-initialize the return values in tpm_buf_read_u8(), tpm_buf_read_u16(),
and tpm_buf_read_u32() to guard against uninitialized data in case of a
boundary overflow.
Add defensive initialization ensures the return values are always defined,
preventing undefined behavior if the unexpected happens.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6359691b4fbcaf3ed86f53043a1f7c6cc54c09be ]
TPM2 sessions have been flushed lazily since commit df745e25098dc ("tpm:
Lazily flush the auth session"). If /dev/tpm{rm}0 is not accessed
in-between two in-kernel calls, it is possible that a TPM2 session is
re-started before the previous one has been completed.
This causes a spurios warning in a legit run-time condition, which is also
correctly addressed with a fast return path:
[ 2.944047] tpm tpm0: auth session is active
Address the issue by changing dev_warn_once() call to a dev_dbg_once()
call.
[jarkko: Rewrote the commit message, and instead of dropping converted
to a debug message.]
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 539fbab37881e32ba6a708a100de6db19e1e7e7d upstream.
tpm2_start_auth_session() does not mask TPM RC correctly from the callers:
[ 28.766528] tpm tpm0: A TPM error (2307) occurred start auth session
Process TPM RCs inside tpm2_start_auth_session(), and map them to POSIX
error codes.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 699e3efd6c64 ("tpm: Add HMAC session start and end functions")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Closes: https://lore.kernel.org/linux-integrity/Z_NgdRHuTKP6JK--@gondor.apana.org.au/
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2f661f71fda1fc0c42b7746ca5b7da529eb6b5be ]
With some Infineon chips the timeouts in tpm_tis_send_data (both B and
C) can reach up to about 2250 ms.
Timeout C is retried since
commit de9e33df7762 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices")
Timeout B still needs to be extended.
The problem is most commonly encountered with context related operation
such as load context/save context. These are issued directly by the
kernel, and there is no retry logic for them.
When a filesystem is set up to use the TPM for unlocking the boot fails,
and restarting the userspace service is ineffective. This is likely
because ignoring a load context/save context result puts the real TPM
state and the TPM state expected by the kernel out of sync.
Chips known to be affected:
tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54)
Description: SLB9672
Firmware Revision: 15.22
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
Firmware Revision: 7.83
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
Firmware Revision: 5.63
Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c876be906ce7e518d9ef9926478669c151999e69 upstream.
register_chrdev will only register the first 256 minors of a major chrdev.
That means that dynamically allocated misc devices with minor above 255
will fail to open with -ENXIO.
This was found by kernel test robot when testing a different change that
makes all dynamically allocated minors be above 255. This has, however,
been separately tested by creating 256 serio_raw devices with the help of
userio driver.
Ever since allowing misc devices with minors above 128, this has been
possible.
Fix it by registering all minor numbers from 0 to MINORMASK + 1 for
MISC_MAJOR.
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/oe-lkp/202503171507.6c8093d0-lkp@intel.com
Fixes: ab760791c0cf ("char: misc: Increase the maximum number of dynamic misc devices to 1048448")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Tested-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Link: https://lore.kernel.org/r/20250317-misc-chrdev-v1-1-6cd05da11aef@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fbd3039a64b01b769040677c4fc68badeca8e3b2 upstream.
As per virtio spec the fields cols and rows are specified as little
endian. Although there is no legacy interface requirement that would
state that cols and rows need to be handled as native endian when legacy
interface is used, unlike for the fields of the adjacent struct
virtio_console_control, I decided to err on the side of caution based
on some non-conclusive virtio spec repo archaeology and opt for using
virtio16_to_cpu() much like for virtio_console_control.event. Strictly
by the letter of the spec virtio_le_to_cpu() would have been sufficient.
But when the legacy interface is not used, it boils down to the same.
And when using the legacy interface, the device formatting these as
little endian when the guest is big endian would surprise me more than
it using guest native byte order (which would make it compatible with
the current implementation). Nevertheless somebody trying to implement
the spec following it to the letter could end up forcing little endian
byte order when the legacy interface is in use. So IMHO this ultimately
needs a judgement call by the maintainers.
Fixes: 8345adbf96fc1 ("virtio: console: Accept console size along with resize control message")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Cc: stable@vger.kernel.org # v2.6.35+
Message-Id: <20250322002954.3129282-1-pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 17d253af4c2c8a2acf84bb55a0c2045f150b7dfd upstream.
Checking TPM_CHIP_FLAG_SUSPENDED after the call to tpm_find_get_ops() can
lead to a spurious tpm_chip_start() call:
[35985.503771] i2c i2c-1: Transfer while suspended
[35985.503796] WARNING: CPU: 0 PID: 74 at drivers/i2c/i2c-core.h:56 __i2c_transfer+0xbe/0x810
[35985.503802] Modules linked in:
[35985.503808] CPU: 0 UID: 0 PID: 74 Comm: hwrng Tainted: G W 6.13.0-next-20250203-00005-gfa0cb5642941 #19 9c3d7f78192f2d38e32010ac9c90fdc71109ef6f
[35985.503814] Tainted: [W]=WARN
[35985.503817] Hardware name: Google Morphius/Morphius, BIOS Google_Morphius.13434.858.0 10/26/2023
[35985.503819] RIP: 0010:__i2c_transfer+0xbe/0x810
[35985.503825] Code: 30 01 00 00 4c 89 f7 e8 40 fe d8 ff 48 8b 93 80 01 00 00 48 85 d2 75 03 49 8b 16 48 c7 c7 0a fb 7c a7 48 89 c6 e8 32 ad b0 fe <0f> 0b b8 94 ff ff ff e9 33 04 00 00 be 02 00 00 00 83 fd 02 0f 5
[35985.503828] RSP: 0018:ffffa106c0333d30 EFLAGS: 00010246
[35985.503833] RAX: 074ba64aa20f7000 RBX: ffff8aa4c1167120 RCX: 0000000000000000
[35985.503836] RDX: 0000000000000000 RSI: ffffffffa77ab0e4 RDI: 0000000000000001
[35985.503838] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
[35985.503841] R10: 0000000000000004 R11: 00000001000313d5 R12: ffff8aa4c10f1820
[35985.503843] R13: ffff8aa4c0e243c0 R14: ffff8aa4c1167250 R15: ffff8aa4c1167120
[35985.503846] FS: 0000000000000000(0000) GS:ffff8aa4eae00000(0000) knlGS:0000000000000000
[35985.503849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[35985.503852] CR2: 00007fab0aaf1000 CR3: 0000000105328000 CR4: 00000000003506f0
[35985.503855] Call Trace:
[35985.503859] <TASK>
[35985.503863] ? __warn+0xd4/0x260
[35985.503868] ? __i2c_transfer+0xbe/0x810
[35985.503874] ? report_bug+0xf3/0x210
[35985.503882] ? handle_bug+0x63/0xb0
[35985.503887] ? exc_invalid_op+0x16/0x50
[35985.503892] ? asm_exc_invalid_op+0x16/0x20
[35985.503904] ? __i2c_transfer+0xbe/0x810
[35985.503913] tpm_cr50_i2c_transfer_message+0x24/0xf0
[35985.503920] tpm_cr50_i2c_read+0x8e/0x120
[35985.503928] tpm_cr50_request_locality+0x75/0x170
[35985.503935] tpm_chip_start+0x116/0x160
[35985.503942] tpm_try_get_ops+0x57/0x90
[35985.503948] tpm_find_get_ops+0x26/0xd0
[35985.503955] tpm_get_random+0x2d/0x80
Don't move forward with tpm_chip_start() inside tpm_try_get_ops(), unless
TPM_CHIP_FLAG_SUSPENDED is not set. tpm_find_get_ops() will return NULL in
such a failure case.
Fixes: 9265fed6db60 ("tpm: Lock TPM chip in tpm_pm_suspend() first")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Cc: stable@vger.kernel.org
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Mike Seo <mikeseohyungjin@gmail.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7146dffa875cd00e7a7f918e1fce79c7593ac1fa upstream.
The change to only use interrupts to handle supported status changes
introduced an issue when it is necessary to poll for the status. Rather
than checking for the status after sleeping the code now sleeps after
the check. This means a correct, but slower, status change on the part
of the TPM can be missed, resulting in a spurious timeout error,
especially on a more loaded system. Switch back to sleeping *then*
checking. An up front check of the status has been done at the start of
the function, so this does not cause an additional delay when the status
is already what we're looking for.
Cc: stable@vger.kernel.org # v6.4+
Fixes: e87fcf0dc2b4 ("tpm, tpm_tis: Only handle supported interrupts")
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1dbf74e00a5f882b04b398399b6def65cd51ef21 ]
Lazy flushing of TPM auth sessions can interact badly with IMA + kexec,
resulting in loaded session handles being leaked across the kexec and
not cleaned up. Fix by ensuring any active auth session is ended before
the TPM is told about the shutdown, matching what is done when
suspending.
Before:
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~# kexec --load --kexec-file-syscall …
root@debian-qemu-efi:~# systemctl kexec
…
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
- 0x2000000
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~#
(repeat kexec steps)
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
- 0x2000000
- 0x2000001
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~#
After:
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~# kexec --load --kexec-file-syscall …
root@debian-qemu-efi:~# systemctl kexec
…
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~#
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit de9e33df7762abbfc2a1568291f2c3a3154c6a9d ]
Some Infineon devices have a issue where the status register will get
stuck with a quick REQUEST_USE / COMMAND_READY sequence. This is not
simply a matter of requiring a longer timeout; the work around is to
retry the command submission. Add appropriate logic to do this in the
send path.
This is fixed in later firmware revisions, but those are not always
available, and cannot generally be easily updated from outside a
firmware environment.
Testing has been performed with a simple repeated loop of doing a
TPM2_CC_GET_CAPABILITY for TPM_CAP_PROP_MANUFACTURER using the Go code
at:
https://the.earth.li/~noodles/tpm-stuff/timeout-reproducer-simple.go
It can take several hours to reproduce, and several million operations.
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6d991f569c5ef6eaeadf1238df2c36e3975233ad upstream.
When creating sysfs files fail, the allocated minor must be freed such that
it can be later reused. That is specially harmful for static minor numbers,
since those would always fail to register later on.
Fixes: 6d04d2b554b1 ("misc: misc_minor_alloc to use ida for all dynamic/misc dynamic minors")
Cc: stable <stable@kernel.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20250123123249.4081674-5-cascardo@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6d04d2b554b14ae6c428a9c60b6c85f1e5c89f68 upstream.
misc_minor_alloc was allocating id using ida for minor only in case of
MISC_DYNAMIC_MINOR but misc_minor_free was always freeing ids
using ida_free causing a mismatch and following warn:
> > WARNING: CPU: 0 PID: 159 at lib/idr.c:525 ida_free+0x3e0/0x41f
> > ida_free called for id=127 which is not allocated.
> > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
...
> > [<60941eb4>] ida_free+0x3e0/0x41f
> > [<605ac993>] misc_minor_free+0x3e/0xbc
> > [<605acb82>] misc_deregister+0x171/0x1b3
misc_minor_alloc is changed to allocate id from ida for all minors
falling in the range of dynamic/ misc dynamic minors
Fixes: ab760791c0cf ("char: misc: Increase the maximum number of dynamic misc devices to 1048448")
Signed-off-by: Vimal Agrawal <vimal.agrawal@sophos.com>
Reviewed-by: Dirk VanDerMerwe <dirk.vandermerwe@sophos.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241021133812.23703-1-vimal.agrawal@sophos.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a3a860bc0fd6c07332e4911cf9a238d20de90173 upstream.
The following failure was reported on HPE ProLiant D320:
[ 10.693310][ T1] tpm_tis STM0925:00: 2.0 TPM (device-id 0x3, rev-id 0)
[ 10.848132][ T1] ------------[ cut here ]------------
[ 10.853559][ T1] WARNING: CPU: 59 PID: 1 at mm/page_alloc.c:4727 __alloc_pages_noprof+0x2ca/0x330
[ 10.862827][ T1] Modules linked in:
[ 10.866671][ T1] CPU: 59 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-lp155.2.g52785e2-default #1 openSUSE Tumbleweed (unreleased) 588cd98293a7c9eba9013378d807364c088c9375
[ 10.882741][ T1] Hardware name: HPE ProLiant DL320 Gen12/ProLiant DL320 Gen12, BIOS 1.20 10/28/2024
[ 10.892170][ T1] RIP: 0010:__alloc_pages_noprof+0x2ca/0x330
[ 10.898103][ T1] Code: 24 08 e9 4a fe ff ff e8 34 36 fa ff e9 88 fe ff ff 83 fe 0a 0f 86 b3 fd ff ff 80 3d 01 e7 ce 01 00 75 09 c6 05 f8 e6 ce 01 01 <0f> 0b 45 31 ff e9 e5 fe ff ff f7 c2 00 00 08 00 75 42 89 d9 80 e1
[ 10.917750][ T1] RSP: 0000:ffffb7cf40077980 EFLAGS: 00010246
[ 10.923777][ T1] RAX: 0000000000000000 RBX: 0000000000040cc0 RCX: 0000000000000000
[ 10.931727][ T1] RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000040cc0
The above transcript shows that ACPI pointed a 16 MiB buffer for the log
events because RSI maps to the 'order' parameter of __alloc_pages_noprof().
Address the bug by moving from devm_kmalloc() to devm_add_action() and
kvmalloc() and devm_add_action().
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org # v2.6.16+
Fixes: 55a82ab3181b ("[PATCH] tpm: add bios measurement log")
Reported-by: Andy Liang <andy.liang@hpe.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219495
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Andy Liang <andy.liang@hpe.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 83d8c79aa958e37724ed9c14dc7d0f66a48ad864 ]
Cosmo found that when there is a new request comes in while BMC is
ready for a response, the complete_response(), which is called to
complete the pending response, would accidentally clear out that new
request and force ssif_bmc to move back to abort state again.
This commit is to address that issue.
Fixes: dd2bc5cc9e25 ("ipmi: ssif_bmc: Add SSIF BMC driver")
Reported-by: Cosmo Chou <chou.cosmo@gmail.com>
Closes: https://lore.kernel.org/lkml/20250101165431.2113407-1-chou.cosmo@gmail.com/
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Message-ID: <20250107034734.1842247-1-quan@os.amperecomputing.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2378bd0b264ad3a1f76bd957caf33ee0c7945351 ]
devm_kasprintf() can return a NULL pointer on failure but this
returned value is not checked.
Fixes: 51bd6f291583 ("Add support for IPMB driver")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Message-ID: <20240926094419.25900-1-hanchunchao@inspur.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
The earlier bug fix misplaced the error-label when dealing with the
tpm2_create_primary() return value, which the original completely ignored.
Cc: stable@vger.kernel.org
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1087331
Fixes: cc7d8594342a ("tpm: Rollback tpm2_load_null()")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The initial HMAC session feature added TPM bus encryption and/or integrity
protection to various in-kernel TPM operations. This can cause performance
bottlenecks with IMA, as it heavily utilizes PCR extend operations.
In order to mitigate this performance issue, introduce a kernel
command-line parameter to the TPM driver for disabling the integrity
protection for PCR extend operations (i.e. TPM2_PCR_Extend).
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Link: https://lore.kernel.org/linux-integrity/20241015193916.59964-1-zohar@linux.ibm.com/
Fixes: 6519fea6fd37 ("tpm: add hmac checks to tpm2_pcr_extend()")
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Setting TPM_CHIP_FLAG_SUSPENDED in the end of tpm_pm_suspend() can be racy
according, as this leaves window for tpm_hwrng_read() to be called while
the operation is in progress. The recent bug report gives also evidence of
this behaviour.
Aadress this by locking the TPM chip before checking any chip->flags both
in tpm_pm_suspend() and tpm_hwrng_read(). Move TPM_CHIP_FLAG_SUSPENDED
check inside tpm_get_random() so that it will be always checked only when
the lock is reserved.
Cc: stable@vger.kernel.org # v6.4+
Fixes: 99d464506255 ("tpm: Prevent hwrng from activating during resume")
Reported-by: Mike Seo <mikeseohyungjin@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219383
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Mike Seo <mikeseohyungjin@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Move the allocation of chip->auth to tpm2_start_auth_session() so that this
field can be used as flag to tell whether auth session is active or not.
Instead of flushing and reloading the auth session for every transaction
separately, keep the session open unless /dev/tpm0 is used.
Reported-by: Pengyu Ma <mapengyu@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219229
Cc: stable@vger.kernel.org # v6.10+
Fixes: 7ca110f2679b ("tpm: Address !chip->auth in tpm_buf_append_hmac_session*()")
Tested-by: Pengyu Ma <mapengyu@gmail.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Do not continue on tpm2_create_primary() failure in tpm2_load_null().
Cc: stable@vger.kernel.org # v6.10+
Fixes: eb24c9788cd9 ("tpm: disable the TPM if NULL name changes")
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Do not continue tpm2_sessions_init() further if the null key pair creation
fails.
Cc: stable@vger.kernel.org # v6.10+
Fixes: d2add27cf2b8 ("tpm: Add NULL primary creation")
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Pull virtio fixes from Michael Tsirkin:
"Several small bugfixes all over the place.
Most notably, fixes the vsock allocation with GFP_KERNEL in atomic
context, which has been triggering warnings for lots of testers"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/scsi: null-ptr-dereference in vhost_scsi_get_req()
vsock/virtio: use GFP_ATOMIC under RCU read lock
virtio_console: fix misc probe bugs
virtio_ring: tag event_triggered as racy for KCSAN
vdpa/octeon_ep: Fix format specifier for pointers in debug messages
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
|
|
This fixes the following issue discovered by code review:
after vqs have been created, a buggy device can send an interrupt.
A control vq callback will then try to schedule control_work which has
not been initialized yet. Similarly for config interrupt. Further, in
and out vq callbacks invoke find_port_by_vq which attempts to take
ports_lock which also has not been initialized.
To fix, init all locks and work before creating vqs.
Message-ID: <ad982e975a6160ad110c623c016041311ca15b4f.1726511547.git.mst@redhat.com>
Fixes: 17634ba25544 ("virtio: console: Add a new MULTIPORT feature, support for generic ports")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Just updates and fixes, no major changes"
* tag 'tpmdd-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: export tpm2_sessions_init() to fix ibmvtpm building
tpm: Drop explicit initialization of struct i2c_device_id::driver_data to 0
selftests: tpm2: test_smoke: Run only when TPM2 is avaialable.
MAINTAINERS: Add selftest files to TPM section
tpm: Clean up TPM space after command failure
|
