summaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)AuthorFilesLines
2026-07-24tpm: Make the TPM character devices non-seekableJaewon Yang2-2/+2
commit f20d61c22bcaf172d6790b6500e3838e532e71c8 upstream. The TPM character devices expose a sequential command/response interface, but their open handlers leave FMODE_PREAD and FMODE_PWRITE enabled. After a command leaves a response pending, pread(fd, buf, 16, 0x1400) passes 0x1400 as *off to tpm_common_read(). The transfer length is bounded by response_length, but the offset is used unchecked when forming data_buffer + *off. A sufficiently large offset therefore causes an out-of-bounds heap read through copy_to_user() and, if the copy succeeds, an out-of-bounds zero-write through the following memset(). Positional I/O does not provide coherent semantics for this interface. An arbitrary pread offset cannot represent how much of a response has been consumed sequentially. The write callback always stores a command at the start of data_buffer, while pwrite() does not update file->f_pos and can leave the sequential read cursor stale. Call nonseekable_open() from both open handlers. This removes FMODE_PREAD and FMODE_PWRITE, causing positional reads and writes to fail with -ESPIPE before reaching the TPM callbacks, and explicitly marks the files non-seekable. Normal read() and write() continue to use the existing sequential f_pos cursor, leaving the response state machine unchanged. Tested on Linux 6.12 with KASAN and a swtpm TPM2 device: - sequential partial reads returned the complete response - pread() and preadv() with offset 0x1400 returned -ESPIPE - pwrite() and pwritev() with offset zero returned -ESPIPE - the pending response remained intact after the rejected operations - a subsequent normal command/response cycle completed normally - no KASAN report was produced. Fixes: 9488585b21be ("tpm: add support for partial reads") Link: https://lore.kernel.org/all/20260710090217.191289-1-yong010301@gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Jaewon Yang <yong010301@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-07-24tpm: fix event_size output in tpm1_binary_bios_measurements_showThorsten Blum1-2/+2
commit 1a58f6115bfb34eabcc7de8a3a9745b219179781 upstream. Commit 186d124f07da ("tpm_eventlog.c: fix binary_bios_measurements") split the output to write the endian-converted event header first and then the variable-length event data. However, the split was at sizeof(struct tcpa_event) - 1, even though event_data was a zero-length array, and later a flexible array member, both of which already excluded the event data. Therefore, the current code writes the first three bytes of event_size from the endian-converted header and then the last byte from the raw header, which can emit a corrupted event_size on PPC64, where do_endian_conversion() maps to be32_to_cpu(). Split one byte later to write the full endian-converted header first, followed by the variable-length event->event_data. Fixes: 186d124f07da ("tpm_eventlog.c: fix binary_bios_measurements") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-07-24char: tlclk: fix use-after-free in tlclk_cleanup()James Kim1-0/+4
[ Upstream commit bbf003b7794d6ad6f939fdd29f1f1bde8ac554c1 ] This patch improves the module cleanup process in the tlclk driver to prevent potential use-after-free and race conditions. Currently, the file_operations structure does not specify the .owner field, which could allow the module to be unloaded while user-space processes are still interacting with the device. Additionally, the tlclk_cleanup() function frees the alarm_events memory before ensuring that blocked processes in the waitqueue are fully awakened and that the switchover_timer has completed. To address these cases, this patch: - Sets '.owner = THIS_MODULE' in tlclk_fops to safely defer module unloading while the device is in use. - Updates tlclk_cleanup() to explicitly wake up all blocked readers (wake_up_all), properly release hardware I/O regions, and safely delete the timer (timer_delete_sync) prior to freeing memory. Fixes: 1a80ba882730 ("[PATCH] Telecom Clock Driver for MPCBL0010 ATCA computer blade") Signed-off-by: James Kim <james010kim@gmail.com> Link: https://patch.msgid.link/20260503101131.64219-1-james010kim@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-07-24hwrng: virtio: clamp device-reported used.len at copy_data()Michael Bommarito1-2/+21
commit e3046eeada299f917a8ad883af4434bfb86556b1 upstream. random_recv_done() stores the device-reported used.len directly into vi->data_avail. copy_data() then indexes vi->data[] using vi->data_idx (advanced by previous copy_data() calls) and issues a memcpy() without re-validating either value against the posted buffer size sizeof(vi->data) (SMP_CACHE_BYTES bytes, typically 32 or 64). A malicious or buggy virtio-rng backend can set used.len beyond sizeof(vi->data), steering the memcpy() past the end of the inline array into adjacent kmalloc-1k slab bytes. hwrng_fillfn() mixes those bytes into the guest RNG, and guest root can also observe them directly via /dev/hwrng. Concrete impact is inside the guest: - Memory-safety / hardening: any virtio-rng backend that over-reports used.len causes the driver to read past vi->data into unrelated slab contents. hwrng_fillfn() is a kernel thread that runs as soon as the device is probed; no guest userspace interaction is required to first-trigger the OOB. - Cross-boundary leak (confidential-compute threat model): a malicious hypervisor cooperating with a malicious or compromised guest root userspace can use /dev/hwrng as a leak channel for guest-kernel heap data. The host sets a large used.len, guest root reads /dev/hwrng, and the returned bytes contain guest kernel slab contents that were adjacent to vi->data. In practice, confidential-compute guests (SEV-SNP, TDX) usually disable virtio-rng entirely, so this path is narrow, but the fix is still worth carrying because the underlying memory-safety bug contaminates the guest RNG on any host. KASAN confirms the OOB on a 7.1-rc4 guest whose virtio-rng backend has been patched to report used.len = 0x10000: BUG: KASAN: slab-out-of-bounds in virtio_read+0x394/0x5d0 Read of size 64 at addr ffff88800ae0ba20 by task hwrng/52 Call Trace: __asan_memcpy+0x23/0x60 virtio_read+0x394/0x5d0 hwrng_fillfn+0xb2/0x470 kthread+0x2cc/0x3a0 Allocated by task 1: probe_common+0xa5/0x660 virtio_dev_probe+0x549/0xbc0 The buggy address belongs to the object at ffff88800ae0b800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes to the right of allocated 544-byte region [ffff88800ae0b800, ffff88800ae0ba20) Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer overflow in USB transport layer"), which hardened usb9pfs_rx_complete() against unchecked device-reported length in the USB 9p transport. With the clamp at point of use and array_index_nospec() in place, the same harness boots cleanly: copy_data() returns zero for the bogus report, the device-supplied bytes after data_idx are discarded, and the driver issues a fresh request. Fixes: f7f510ec1957 ("virtio: An entropy device, as suggested by hpa.") Cc: stable@vger.kernel.org Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-ID: <20260531142251.2792061-1-michael.bommarito@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-07-04agp/amd64: Fix broken error propagation in agp_amd64_probe()Mingyu Wang1-1/+1
commit b08472db93b1ccff84a7adec5779d47f0e9d3a30 upstream. A NULL pointer dereference was observed in the AMD64 AGP driver when running in a virtualized environment (e.g. qemu/kvm) without a physical AMD northbridge. The crash occurs in amd64_fetch_size() when attempting to dereference the pointer returned by node_to_amd_nb(0). The root cause of this crash is broken error propagation in agp_amd64_probe(): When no AMD northbridges are found, cache_nbs() correctly returns -ENODEV. However, the probe function erroneously checks the return value against exactly -1, rather than < 0. As a result, the hardware absence error is masked, allowing the driver to improperly proceed with initialization. It eventually calls agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware does not exist, node_to_amd_nb(0) returns NULL, leading to a General Protection Fault (GPF) when accessing its ->misc member. Fix the issue by correcting the error check in agp_amd64_probe() to abort properly when cache_nbs() returns any negative error code. This prevents the driver from erroneously proceeding without hardware, thereby avoiding the subsequent NULL pointer dereference at its source. Fixes: a32073bffc65 ("[PATCH] x86_64: Clean and enhance up K8 northbridge access code") Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v2.6.18+ Link: https://patch.msgid.link/20260504074823.99377-1-w15303746062@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-06-19use less confusing names for iov_iter direction initializersAl Viro1-2/+2
[ Upstream commit de4eda9de2d957ef2d6a8365a01e26a435e958cb ] READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Stable-dep-of: a4f0b001782b ("vsock/virtio: reset connection on receiving queue overflow") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-06-01ipmi:ssif: NULL thread on errorCorey Minyard1-0/+1
commit a8aebe93a4938c0ca1941eeaae821738f869be3d upstream. Cleanup code was checking the thread for NULL, but it was possibly a PTR_ERR() in one spot. Spotted with static analysis. Link: https://sourceforge.net/p/openipmi/mailman/message/59324676/ Fixes: 75c486cb1bca ("ipmi:ssif: Clean up kthread on errors") Cc: <stable@vger.kernel.org> # 91eb7ec72612: ipmi:ssif: Remove unnecessary indention Cc: stable@vger.kernel.org Signed-off-by: Corey Minyard <corey@minyard.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-06-01ipmi:ssif: Remove unnecessary indentionCorey Minyard1-16/+12
commit 91eb7ec7261254b6875909df767185838598e21e upstream. A section was in {} that didn't need to be, move the variable definition to the top and set th eindentino properly. Signed-off-by: Corey Minyard <corey@minyard.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-06-01ipmi:ssif: Clean up kthread on errorsCorey Minyard1-0/+12
commit 75c486cb1bcaa1a3ec3a6438498176a3a4998ae4 upstream. If an error occurs after the ssif kthread is created, but before the main IPMI code starts the ssif interface, the ssif kthread will not be stopped. So make sure the kthread is stopped on an error condition if it is running. Fixes: 259307074bfc ("ipmi: Add SMBus interface driver (SSIF)") Reported-by: Li Xiao <<252270051@hdu.edu.cn> Cc: stable@vger.kernel.org Reviewed-by: Li Xiao <252270051@hdu.edu.cn> [Adjusted for stopping flag and complete operation still being present.] Signed-off-by: Corey Minyard <corey@minyard.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-06-01ipmi:ssif: Fix a shutdown raceCorey Minyard1-0/+10
It was possible for the SSIF thread to stop and quit before the kthread_stop() call because ssif->stopping was set before the stop. So only exit the SSIF thread is kthread_should_stop() returns true. In the mainstream kernel this was fixed in 6bd0eb6d759b ("ipmi:ssif: Fix a shutdown race"). However, that requires a fix in kernel version 6.1 has a fix to kthread stop to cause interruptible waits to return -ERESTARTSYS on a stop. This has not been backported to older kernels, and that would probably be a bad idea. But it means that the mainstrem kernel fix for this will not work. Instead, wait for kthread_should_stop() to return true before exiting the thread. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-06-01ipmi:si: Return state to normal if message allocation failsCorey Minyard1-2/+6
commit 09dd798270ff582d7309f285d4aaf5dbebae01cb upstream. There were places where nothing would get started if a message allocation failed, so the driver needs to return to normal state. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: <stable@vger.kernel.org> Signed-off-by: Corey Minyard <corey@minyard.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-06-01ipmi: Check event message buffer response for bad dataCorey Minyard1-1/+7
commit 36920f30e78e69df01f9691c470b6f3ba8aebf98 upstream. The event message buffer response data size got checked later when processing, but check it right after the response comes back. It appears some BMCs may return an empty message instead of an error when fetching events. There are apparently some new BMCs that make this error, so we need to compensate. Reported-by: Matt Fleming <mfleming@cloudflare.com> Closes: https://lore.kernel.org/lkml/20260415115930.3428942-1-matt@readmodwrite.com/ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: <stable@vger.kernel.org> Signed-off-by: Corey Minyard <corey@minyard.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-06-01ipmi: Add limits to event and receive message requestsCorey Minyard2-13/+64
commit c4cca236968683eb0d59abfb12d5c7e4d8514227 upstream. The driver would just fetch events and receive messages until the BMC said it was done. To avoid issues with BMCs that never say they are done, add a limit of 10 fetches at a time. In addition, an si interface has an attn state it can return from the hardware which is supposed to cause a flag fetch to see if the driver needs to fetch events or message or a few other things. If the attn bit gets stuck, it's a similar problem. So allow messages in between flag fetches so the driver itself doesn't get stuck. This is a more general fix than the previous fix for the specific bad BMC, but should fix the more general issue of a BMC that won't stop saying it has data. This has been there from the beginning of the driver. It's not a bug per-se, but it is accounting for bugs in BMCs. Reported-by: Matt Fleming <mfleming@cloudflare.com> Closes: https://lore.kernel.org/lkml/20260415115930.3428942-1-matt@readmodwrite.com/ Fixes: <1da177e4c3f4> ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Corey Minyard <corey@minyard.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-06-01tpm: tpm_tis: add error logging for data transferJacqueline Wong1-0/+4
commit 0471921e2d1043dcc6de5cffb49dd37709521abe upstream. Add logging to more easily determine reason for transmit failure Cc: stable@vger.kernel.org # v6.6+ Fixes: 280db21e153d8 ("tpm_tis: Resend command to recover from data transfer errors") Signed-off-by: Jacqueline Wong <jacqwong@google.com> Signed-off-by: Jordan Hand <jhand@google.com> Link: https://lore.kernel.org/r/20260415160006.2275325-2-jacqwong@google.com Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-04tpm: st33zp24: Fix missing cleanup on get_burstcount() errorAlper Ak1-2/+4
[ Upstream commit 3e91b44c93ad2871f89fc2a98c5e4fe6ca5db3d9 ] get_burstcount() can return -EBUSY on timeout. When this happens, st33zp24_send() returns directly without releasing the locality acquired earlier. Use goto out_err to ensure proper cleanup when get_burstcount() fails. Fixes: bf38b8710892 ("tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)") Signed-off-by: Alper Ak <alperyasinak1@gmail.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04tpm: tpm_i2c_infineon: Fix locality leak on get_burstcount() failureAlper Ak1-2/+4
[ Upstream commit bbd6e97c836cbeb9606d7b7e5dcf8a1d89525713 ] get_burstcount() can return -EBUSY on timeout. When this happens, the function returns directly without releasing the locality that was acquired at the beginning of tpm_tis_i2c_send(). Use goto out_err to ensure proper cleanup when get_burstcount() fails. Fixes: aad628c1d91a ("char/tpm: Add new driver for Infineon I2C TIS TPM") Signed-off-by: Alper Ak <alperyasinak1@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19tpm: Cap the number of PCR banksJarkko Sakkinen3-11/+3
[ Upstream commit faf07e611dfa464b201223a7253e9dc5ee0f3c9e ] tpm2_get_pcr_allocation() does not cap any upper limit for the number of banks. Cap the limit to eight banks so that out of bounds values coming from external I/O cause on only limited harm. Cc: stable@vger.kernel.org # v5.10+ Fixes: bcfff8384f6c ("tpm: dynamically allocate the allocated_banks array") Tested-by: Lai Yi <yi1.lai@linux.intel.com> Reviewed-by: Jonathan McDowell <noodles@meta.com> Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com> [ added backward-compatible define for TPM_MAX_DIGEST_SIZE to support older ima_init.c code still using that macro name ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19virtio_console: fix order of fields cols and rowsMaximilian Immanuel Brandtner1-1/+1
commit 5326ab737a47278dbd16ed3ee7380b26c7056ddd upstream. According to section 5.3.6.2 (Multiport Device Operation) of the virtio spec(version 1.2) a control buffer with the event VIRTIO_CONSOLE_RESIZE is followed by a virtio_console_resize struct containing cols then rows. The kernel implements this the wrong way around (rows then cols) resulting in the two values being swapped. Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com> Message-Id: <20250324144300.905535-1-maxbr@linux.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Filip Hejsek <filip.hejsek@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19char: applicom: fix NULL pointer dereference in ac_ioctlTianchu Chen1-1/+4
commit 82d12088c297fa1cef670e1718b3d24f414c23f7 upstream. Discovered by Atuin - Automated Vulnerability Discovery Engine. In ac_ioctl, the validation of IndexCard and the check for a valid RamIO pointer are skipped when cmd is 6. However, the function unconditionally executes readb(apbs[IndexCard].RamIO + VERS) at the end. If cmd is 6, IndexCard may reference a board that does not exist (where RamIO is NULL), leading to a NULL pointer dereference. Fix this by skipping the readb access when cmd is 6, as this command is a global information query and does not target a specific board context. Signed-off-by: Tianchu Chen <flynnnchen@tencent.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/20251128155323.a786fde92ebb926cbe96fcb1@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19ipmi: Fix __scan_channels() failing to rescan channelsJinhui Guo1-5/+13
[ Upstream commit 6bd30d8fc523fb880b4be548e8501bc0fe8f42d4 ] channel_handler() sets intf->channels_ready to true but never clears it, so __scan_channels() skips any rescan. When the BMC firmware changes a rescan is required. Allow it by clearing the flag before starting a new scan. Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com> Message-ID: <20250930074239.2353-3-guojinhui.liam@bytedance.com> Signed-off-by: Corey Minyard <corey@minyard.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19ipmi: Fix the race between __scan_channels() and deliver_response()Jinhui Guo1-2/+0
[ Upstream commit 936750fdba4c45e13bbd17f261bb140dd55f5e93 ] The race window between __scan_channels() and deliver_response() causes the parameters of some channels to be set to 0. 1.[CPUA] __scan_channels() issues an IPMI request and waits with wait_event() until all channels have been scanned. wait_event() internally calls might_sleep(), which might yield the CPU. (Moreover, an interrupt can preempt wait_event() and force the task to yield the CPU.) 2.[CPUB] deliver_response() is invoked when the CPU receives the IPMI response. After processing a IPMI response, deliver_response() directly assigns intf->wchannels to intf->channel_list and sets intf->channels_ready to true. However, not all channels are actually ready for use. 3.[CPUA] Since intf->channels_ready is already true, wait_event() never enters __wait_event(). __scan_channels() immediately clears intf->null_user_handler and exits. 4.[CPUB] Once intf->null_user_handler is set to NULL, deliver_response() ignores further IPMI responses, leaving the remaining channels zero-initialized and unusable. CPUA CPUB ------------------------------- ----------------------------- __scan_channels() intf->null_user_handler = channel_handler; send_channel_info_cmd(intf, 0); wait_event(intf->waitq, intf->channels_ready); do { might_sleep(); deliver_response() channel_handler() intf->channel_list = intf->wchannels + set; intf->channels_ready = true; send_channel_info_cmd(intf, intf->curr_channel); if (condition) break; __wait_event(wq_head, condition); } while(0) intf->null_user_handler = NULL; deliver_response() if (!msg->user) if (intf->null_user_handler) rv = -EINVAL; return rv; ------------------------------- ----------------------------- Fix the race between __scan_channels() and deliver_response() by deferring both the assignment intf->channel_list = intf->wchannels and the flag intf->channels_ready = true until all channels have been successfully scanned or until the IPMI request has failed. Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com> Message-ID: <20250930074239.2353-2-guojinhui.liam@bytedance.com> Signed-off-by: Corey Minyard <corey@minyard.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07char: misc: Does not request module for miscdevice with dynamic minorZijun Hu1-3/+5
[ Upstream commit 1ba0fb42aa6a5f072b1b8c0b0520b32ad4ef4b45 ] misc_open() may request module for miscdevice with dynamic minor, which is meaningless since: - The dynamic minor allocated is unknown in advance without registering miscdevice firstly. - Macro MODULE_ALIAS_MISCDEV() is not applicable for dynamic minor. Fix by only requesting module for miscdevice with fixed minor. Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250714-rfc_miscdev-v6-6-2ed949665bde@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-29tpm_tis: Fix incorrect arguments in tpm_tis_probe_irq_singleGunnar Kudrjavets1-2/+2
[ Upstream commit 8a81236f2cb0882c7ea6c621ce357f7f3f601fe5 ] The tpm_tis_write8() call specifies arguments in wrong order. Should be (data, addr, value) not (data, value, addr). The initial correct order was changed during the major refactoring when the code was split. Fixes: 41a5e1cf1fe1 ("tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phy") Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com> Reviewed-by: Justinien Bouron <jbouron@amazon.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-29hwrng: ks-sa - fix division by zero in ks_sa_rng_initNishanth Menon1-0/+4
[ Upstream commit 612b1dfeb414dfa780a6316014ceddf9a74ff5c0 ] Fix division by zero in ks_sa_rng_init caused by missing clock pointer initialization. The clk_get_rate() call is performed on an uninitialized clk pointer, resulting in division by zero when calculating delay values. Add clock initialization code before using the clock. Fixes: 6d01d8511dce ("hwrng: ks-sa - Add minimum sleep time before ready-polling") Signed-off-by: Nishanth Menon <nm@ti.com> drivers/char/hw_random/ks-sa-rng.c | 7 +++++++ 1 file changed, 7 insertions(+) Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28ipmi: Fix strcpy source and destination the sameCorey Minyard1-17/+42
[ Upstream commit 8ffcb7560b4a15faf821df95e3ab532b2b020f8c ] The source and destination of some strcpy operations was the same. Split out the part of the operations that needed to be done for those particular calls so the unnecessary copy wasn't done. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506140756.EFXXvIP4-lkp@intel.com/ Signed-off-by: Corey Minyard <corey@minyard.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28ipmi: Use dev_warn_ratelimited() for incorrect message warningsBreno Leitao1-4/+4
[ Upstream commit ec50ec378e3fd83bde9b3d622ceac3509a60b6b5 ] During BMC firmware upgrades on live systems, the ipmi_msghandler generates excessive "BMC returned incorrect response" warnings while the BMC is temporarily offline. This can flood system logs in large deployments. Replace dev_warn() with dev_warn_ratelimited() to throttle these warnings and prevent log spam during BMC maintenance operations. Signed-off-by: Breno Leitao <leitao@debian.org> Message-ID: <20250710-ipmi_ratelimit-v1-1-6d417015ebe9@debian.org> Signed-off-by: Corey Minyard <corey@minyard.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28hwrng: mtk - handle devm_pm_runtime_enable errorsOvidiu Panait1-1/+3
[ Upstream commit 522a242a18adc5c63a24836715dbeec4dc3faee1 ] Although unlikely, devm_pm_runtime_enable() call might fail, so handle the return value. Fixes: 78cb66caa6ab ("hwrng: mtk - Use devm_pm_runtime_enable") Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04tpm: tis: Double the timeout B to 4sMichal Suchanek1-1/+1
[ Upstream commit 2f661f71fda1fc0c42b7746ca5b7da529eb6b5be ] With some Infineon chips the timeouts in tpm_tis_send_data (both B and C) can reach up to about 2250 ms. Timeout C is retried since commit de9e33df7762 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices") Timeout B still needs to be extended. The problem is most commonly encountered with context related operation such as load context/save context. These are issued directly by the kernel, and there is no retry logic for them. When a filesystem is set up to use the TPM for unlocking the boot fails, and restarting the userspace service is ineffective. This is likely because ignoring a load context/save context result puts the real TPM state and the TPM state expected by the kernel out of sync. Chips known to be affected: tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54) Description: SLB9672 Firmware Revision: 15.22 tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22) Firmware Revision: 7.83 tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16) Firmware Revision: 5.63 Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/ Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02virtio_console: fix missing byte order handling for cols and rowsHalil Pasic1-3/+4
commit fbd3039a64b01b769040677c4fc68badeca8e3b2 upstream. As per virtio spec the fields cols and rows are specified as little endian. Although there is no legacy interface requirement that would state that cols and rows need to be handled as native endian when legacy interface is used, unlike for the fields of the adjacent struct virtio_console_control, I decided to err on the side of caution based on some non-conclusive virtio spec repo archaeology and opt for using virtio16_to_cpu() much like for virtio_console_control.event. Strictly by the letter of the spec virtio_le_to_cpu() would have been sufficient. But when the legacy interface is not used, it boils down to the same. And when using the legacy interface, the device formatting these as little endian when the guest is big endian would surprise me more than it using guest native byte order (which would make it compatible with the current implementation). Nevertheless somebody trying to implement the spec following it to the letter could end up forcing little endian byte order when the legacy interface is in use. So IMHO this ultimately needs a judgement call by the maintainers. Fixes: 8345adbf96fc1 ("virtio: console: Accept console size along with resize control message") Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Cc: stable@vger.kernel.org # v2.6.35+ Message-Id: <20250322002954.3129282-1-pasic@linux.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13tpm: Change to kvalloc() in eventlog/acpi.cJarkko Sakkinen1-2/+13
[ Upstream commit a3a860bc0fd6c07332e4911cf9a238d20de90173 ] The following failure was reported on HPE ProLiant D320: [ 10.693310][ T1] tpm_tis STM0925:00: 2.0 TPM (device-id 0x3, rev-id 0) [ 10.848132][ T1] ------------[ cut here ]------------ [ 10.853559][ T1] WARNING: CPU: 59 PID: 1 at mm/page_alloc.c:4727 __alloc_pages_noprof+0x2ca/0x330 [ 10.862827][ T1] Modules linked in: [ 10.866671][ T1] CPU: 59 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-lp155.2.g52785e2-default #1 openSUSE Tumbleweed (unreleased) 588cd98293a7c9eba9013378d807364c088c9375 [ 10.882741][ T1] Hardware name: HPE ProLiant DL320 Gen12/ProLiant DL320 Gen12, BIOS 1.20 10/28/2024 [ 10.892170][ T1] RIP: 0010:__alloc_pages_noprof+0x2ca/0x330 [ 10.898103][ T1] Code: 24 08 e9 4a fe ff ff e8 34 36 fa ff e9 88 fe ff ff 83 fe 0a 0f 86 b3 fd ff ff 80 3d 01 e7 ce 01 00 75 09 c6 05 f8 e6 ce 01 01 <0f> 0b 45 31 ff e9 e5 fe ff ff f7 c2 00 00 08 00 75 42 89 d9 80 e1 [ 10.917750][ T1] RSP: 0000:ffffb7cf40077980 EFLAGS: 00010246 [ 10.923777][ T1] RAX: 0000000000000000 RBX: 0000000000040cc0 RCX: 0000000000000000 [ 10.931727][ T1] RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000040cc0 The above transcript shows that ACPI pointed a 16 MiB buffer for the log events because RSI maps to the 'order' parameter of __alloc_pages_noprof(). Address the bug by moving from devm_kmalloc() to devm_add_action() and kvmalloc() and devm_add_action(). Suggested-by: Ard Biesheuvel <ardb@kernel.org> Cc: stable@vger.kernel.org # v2.6.16+ Fixes: 55a82ab3181b ("[PATCH] tpm: add bios measurement log") Reported-by: Andy Liang <andy.liang@hpe.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219495 Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Andy Liang <andy.liang@hpe.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13tpm: Use managed allocation for bios event logEddie James4-10/+12
[ Upstream commit 441b7152729f4a2bdb100135a58625fa0aeb69e4 ] Since the bios event log is freed in the device release function, let devres handle the deallocation. This will allow other memory allocation/mapping functions to be used for the bios event log. Signed-off-by: Eddie James <eajames@linux.ibm.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Stable-dep-of: a3a860bc0fd6 ("tpm: Change to kvalloc() in eventlog/acpi.c") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13ipmi: ipmb: Add check devm_kasprintf() returned valueCharles Han1-0/+3
[ Upstream commit 2378bd0b264ad3a1f76bd957caf33ee0c7945351 ] devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fixes: 51bd6f291583 ("Add support for IPMB driver") Signed-off-by: Charles Han <hanchunchao@inspur.com> Message-ID: <20240926094419.25900-1-hanchunchao@inspur.com> Signed-off-by: Corey Minyard <corey@minyard.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17virtio_console: fix misc probe bugsMichael S. Tsirkin1-8/+10
[ Upstream commit b9efbe2b8f0177fa97bfab290d60858900aa196b ] This fixes the following issue discovered by code review: after vqs have been created, a buggy device can send an interrupt. A control vq callback will then try to schedule control_work which has not been initialized yet. Similarly for config interrupt. Further, in and out vq callbacks invoke find_port_by_vq which attempts to take ports_lock which also has not been initialized. To fix, init all locks and work before creating vqs. Message-ID: <ad982e975a6160ad110c623c016041311ca15b4f.1726511547.git.mst@redhat.com> Fixes: 17634ba25544 ("virtio: console: Add a new MULTIPORT feature, support for generic ports") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17hwrng: cctrng - Add missing clk_disable_unprepare in cctrng_resumeGaosheng Cui1-0/+1
commit 4b7acc85de14ee8a2236f54445dc635d47eceac0 upstream. Add the missing clk_disable_unprepare() before return in cctrng_resume(). Fixes: a583ed310bb6 ("hwrng: cctrng - introduce Arm CryptoCell driver") Cc: <stable@vger.kernel.org> Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17hwrng: mtk - Use devm_pm_runtime_enableGuoqing Jiang1-1/+1
commit 78cb66caa6ab5385ac2090f1aae5f3c19e08f522 upstream. Replace pm_runtime_enable with the devres-enabled version which can trigger pm_runtime_disable. Otherwise, the below appears during reload driver. mtk_rng 1020f000.rng: Unbalanced pm_runtime_enable! Fixes: 81d2b34508c6 ("hwrng: mtk - add runtime PM support") Cc: <stable@vger.kernel.org> Suggested-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17tpm: Clean up TPM space after command failureJonathan McDowell2-0/+5
[ Upstream commit e3aaebcbb7c6b403416f442d1de70d437ce313a7 ] tpm_dev_transmit prepares the TPM space before attempting command transmission. However if the command fails no rollback of this preparation is done. This can result in transient handles being leaked if the device is subsequently closed with no further commands performed. Fix this by flushing the space in the event of command transmission failure. Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces") Signed-off-by: Jonathan McDowell <noodles@meta.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-19hwrng: amd - Convert PCIBIOS_* return codes to errnosIlpo Järvinen1-1/+3
commit 14cba6ace79627a57fb9058582b03f0ed3832390 upstream. amd_rng_mod_init() uses pci_read_config_dword() that returns PCIBIOS_* codes. The return code is then returned as is but amd_rng_mod_init() is a module_init() function that should return normal errnos. Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning it. Fixes: 96d63c0297cc ("[PATCH] Add AMD HW RNG driver") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-19char: tpm: Fix possible memory leak in tpm_bios_measurements_open()Joe Hattori1-0/+2
commit 5d8e2971e817bb64225fc0b6327a78752f58a9aa upstream. In tpm_bios_measurements_open(), get_device() is called on the device embedded in struct tpm_chip. In the error path, however, put_device() is not called. This results in a reference count leak, which prevents the device from being properly released. This commit makes sure to call put_device() when the seq_open() call fails. Cc: stable@vger.kernel.org # +v4.18 Fixes: 9b01b5356629 ("tpm: Move shared eventlog functions to common.c") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-18hpet: Support 32-bit userspaceHe Zhe1-5/+29
commit 4e60131d0d36af65ab9c9144f4f163fe97ae36e8 upstream. hpet_compat_ioctl and read file operations failed to handle parameters from 32-bit userspace and thus samples/timers/hpet_example.c fails as below. root@intel-x86-64:~# ./hpet_example-32.out poll /dev/hpet 1 2 -hpet: executing poll hpet_poll: HPET_IRQFREQ failed This patch fixes cmd and arg handling in hpet_compat_ioctl and adds compat handling for 32-bit userspace in hpet_read. hpet_example now shows that it works for both 64-bit and 32-bit. root@intel-x86-64:~# ./hpet_example-32.out poll /dev/hpet 1 2 -hpet: executing poll hpet_poll: info.hi_flags 0x0 hpet_poll: expired time = 0xf4298 hpet_poll: revents = 0x1 hpet_poll: data 0x1 hpet_poll: expired time = 0xf4235 hpet_poll: revents = 0x1 hpet_poll: data 0x1 root@intel-x86-64:~# ./hpet_example-64.out poll /dev/hpet 1 2 -hpet: executing poll hpet_poll: info.hi_flags 0x0 hpet_poll: expired time = 0xf42a1 hpet_poll: revents = 0x1 hpet_poll: data 0x1 hpet_poll: expired time = 0xf4232 hpet_poll: revents = 0x1 hpet_poll: data 0x1 Cc: stable@vger.kernel.org Signed-off-by: He Zhe <zhe.he@windriver.com> Fixes: 54066a57c584 ("hpet: kill BKL, add compat_ioctl") Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240606123908.738733-1-zhe.he@windriver.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16ppdev: Add an error check in register_deviceHuai-Yuan Liu1-4/+11
[ Upstream commit fbf740aeb86a4fe82ad158d26d711f2f3be79b3e ] In register_device, the return value of ida_simple_get is unchecked, in witch ida_simple_get will use an invalid index value. To address this issue, index should be checked after ida_simple_get. When the index value is abnormal, a warning message should be printed, the port should be dropped, and the value should be recorded. Fixes: 9a69645dde11 ("ppdev: fix registering same device name") Signed-off-by: Huai-Yuan Liu <qq810974084@gmail.com> Link: https://lore.kernel.org/r/20240412083840.234085-1-qq810974084@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-16ppdev: Remove usage of the deprecated ida_simple_xx() APIChristophe JAILLET1-3/+3
[ Upstream commit d8407f71ebeaeb6f50bd89791837873e44609708 ] ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ba9da12fdd5cdb2c28180b7160af5042447d803f.1702962092.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: fbf740aeb86a ("ppdev: Add an error check in register_device") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23hwrng: core - Fix page fault dead lock on mmap-ed hwrngHerbert Xu1-13/+21
commit 78aafb3884f6bc6636efcc1760c891c8500b9922 upstream. There is a dead-lock in the hwrng device read path. This triggers when the user reads from /dev/hwrng into memory also mmap-ed from /dev/hwrng. The resulting page fault triggers a recursive read which then dead-locks. Fix this by using a stack buffer when calling copy_to_user. Reported-by: Edward Adam Davis <eadavis@qq.com> Reported-by: syzbot+c52ab18308964d248092@syzkaller.appspotmail.com Fixes: 9996508b3353 ("hwrng: core - Replace u32 in driver API with byte array") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-20hwrng: geode - fix accessing registersJonas Gorski1-2/+4
[ Upstream commit 464bd8ec2f06707f3773676a1bd2c64832a3c805 ] When the membase and pci_dev pointer were moved to a new struct in priv, the actual membase users were left untouched, and they started reading out arbitrary memory behind the struct instead of registers. This unfortunately turned the RNG into a constant number generator, depending on the content of what was at that offset. To fix this, update geode_rng_data_{read,present}() to also get the membase via amd_geode_priv, and properly read from the right addresses again. Fixes: 9f6ec8dc574e ("hwrng: geode - Fix PCI device refcount leak") Reported-by: Timur I. Davletshin <timur.davletshin@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217882 Tested-by: Timur I. Davletshin <timur.davletshin@gmail.com> Suggested-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10parisc: sba: Fix compile warning wrt list of SBA devicesHelge Deller1-2/+0
[ Upstream commit eb3255ee8f6f4691471a28fbf22db5e8901116cd ] Fix this makecheck warning: drivers/parisc/sba_iommu.c:98:19: warning: symbol 'sba_list' was not declared. Should it be static? Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23tpm_tis: Resend command to recover from data transfer errorsAlexander Steffen1-4/+11
[ Upstream commit 280db21e153d8810ce3b93640c63ae922bcb9e8e ] Similar to the transmission of TPM responses, also the transmission of TPM commands may become corrupted. Instead of aborting when detecting such issues, try resending the command again. Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19ipmi_si: fix a memleak in try_smi_init()Yi Yang1-0/+5
commit 6cf1a126de2992b4efe1c3c4d398f8de4aed6e3f upstream. Kmemleak reported the following leak info in try_smi_init(): unreferenced object 0xffff00018ecf9400 (size 1024): comm "modprobe", pid 2707763, jiffies 4300851415 (age 773.308s) backtrace: [<000000004ca5b312>] __kmalloc+0x4b8/0x7b0 [<00000000953b1072>] try_smi_init+0x148/0x5dc [ipmi_si] [<000000006460d325>] 0xffff800081b10148 [<0000000039206ea5>] do_one_initcall+0x64/0x2a4 [<00000000601399ce>] do_init_module+0x50/0x300 [<000000003c12ba3c>] load_module+0x7a8/0x9e0 [<00000000c246fffe>] __se_sys_init_module+0x104/0x180 [<00000000eea99093>] __arm64_sys_init_module+0x24/0x30 [<0000000021b1ef87>] el0_svc_common.constprop.0+0x94/0x250 [<0000000070f4f8b7>] do_el0_svc+0x48/0xe0 [<000000005a05337f>] el0_svc+0x24/0x3c [<000000005eb248d6>] el0_sync_handler+0x160/0x164 [<0000000030a59039>] el0_sync+0x160/0x180 The problem was that when an error occurred before handlers registration and after allocating `new_smi->si_sm`, the variable wouldn't be freed in the error handling afterwards since `shutdown_smi()` hadn't been registered yet. Fix it by adding a `kfree()` in the error handling path in `try_smi_init()`. Cc: stable@vger.kernel.org # 4.19+ Fixes: 7960f18a5647 ("ipmi_si: Convert over to a shutdown handler") Signed-off-by: Yi Yang <yiyang13@huawei.com> Co-developed-by: GONG, Ruiqi <gongruiqi@huaweicloud.com> Signed-off-by: GONG, Ruiqi <gongruiqi@huaweicloud.com> Message-Id: <20230629123328.2402075-1-gongruiqi@huaweicloud.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-19ipmi:ssif: Fix a memory leak when scanning for an adapterCorey Minyard1-1/+1
[ Upstream commit b8d72e32e1453d37ee5c8a219f24e7eeadc471ef ] The adapter scan ssif_info_find() sets info->adapter_name if the adapter info came from SMBIOS, as it's not set in that case. However, this function can be called more than once, and it will leak the adapter name if it had already been set. So check for NULL before setting it. Fixes: c4436c9149c5 ("ipmi_ssif: avoid registering duplicate ssif interface") Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19ipmi:ssif: Add check for kstrdupJiasheng Jiang1-0/+5
[ Upstream commit c5586d0f711e9744d0cade39b0c4a2d116a333ca ] Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. Fixes: c4436c9149c5 ("ipmi_ssif: avoid registering duplicate ssif interface") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Message-Id: <20230619092802.35384-1-jiasheng@iscas.ac.cn> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19hwrng: iproc-rng200 - Implement suspend and resume callsFlorian Fainelli1-0/+25
[ Upstream commit 8e03dd62e5be811efbf0cbeba47e79e793519105 ] Chips such as BCM7278 support system wide suspend/resume which will cause the HWRNG block to lose its state and reset to its power on reset register values. We need to cleanup and re-initialize the HWRNG for it to be functional coming out of a system suspend cycle. Fixes: c3577f6100ca ("hwrng: iproc-rng200 - Add support for BCM7278") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19hwrng: nomadik - keep clock enabled while hwrng is registeredMartin Kaiser1-9/+3
[ Upstream commit 039980de89dc9dd757418d6f296e4126cc3f86c3 ] The nomadik driver uses devres to register itself with the hwrng core, the driver will be unregistered from hwrng when its device goes out of scope. This happens after the driver's remove function is called. However, nomadik's clock is disabled in the remove function. There's a short timeframe where nomadik is still registered with the hwrng core although its clock is disabled. I suppose the clock must be active to access the hardware and serve requests from the hwrng core. Switch to devm_clk_get_enabled and let devres disable the clock and unregister the hwrng. This avoids the race condition. Fixes: 3e75241be808 ("hwrng: drivers - Use device-managed registration API") Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-08-17 05:44:16 +0300