summaryrefslogtreecommitdiff
path: root/drivers/char/tpm/tpm-interface.c
AgeCommit message (Collapse)AuthorFilesLines
2015-02-15tpm: fix suspend/resume paths for TPM 2.0Jarkko Sakkinen1-2/+4
Fixed suspend/resume paths for TPM 2.0 and consolidated all the associated code to the tpm_pm_suspend() and tpm_pm_resume() functions. Resume path should be handled by the firmware, i.e. Startup(CLEAR) for hibernate and Startup(STATE) for suspend. There might be some non-PC embedded devices in the future where Startup() is not the handled by the FW but fixing the code for those IMHO should be postponed until there is hardware available to test the fixes although extra Startup in the driver code is essentially a NOP. Added Shutdown(CLEAR) to the remove paths of TIS and CRB drivers. Changed tpm2_shutdown() to a void function because there isn't much you can do except print an error message if this fails with a system error. Fixes: aec04cbdf723 ("tpm: TPM 2.0 FIFO Interface") Fixes: 30fc8d138e91 ("tpm: TPM 2.0 CRB Interface") [phuewe: both did send TPM_Shutdown on resume which 'disables' the TPM and did not send TPM2_Shutdown on teardown which leads some TPM2.0 to believe there was an attack (no TPM2_Shutdown = no orderly shutdown = attack)] Reported-by: Peter Hüwe <PeterHuewe@gmx.de> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Scot Doyle <lkml14@scotdoyle.com> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-01-17tpm: TPM 2.0 CRB InterfaceJarkko Sakkinen1-0/+3
tpm_crb is a driver for TPM 2.0 Command Response Buffer (CRB) Interface as defined in PC Client Platform TPM Profile (PTP) Specification. Only polling and single locality is supported as these are the limitations of the available hardware, Platform Trust Techonlogy (PTT) in Haswell CPUs. The driver always applies CRB with ACPI start because PTT reports using only ACPI start as start method but as a result of my testing it requires also CRB start. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jasob Gunthorpe <jason.gunthorpe@obsidianresearch.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-01-17tpm: TPM 2.0 baseline supportJarkko Sakkinen1-2/+21
TPM 2.0 devices are separated by adding a field 'flags' to struct tpm_chip and defining a flag TPM_CHIP_FLAG_TPM2 for tagging them. This patch adds the following internal functions: - tpm2_get_random() - tpm2_get_tpm_pt() - tpm2_pcr_extend() - tpm2_pcr_read() - tpm2_startup() Additionally, the following exported functions are implemented for implementing TPM 2.0 device drivers: - tpm2_do_selftest() - tpm2_calc_ordinal_durations() - tpm2_gen_interrupt() The existing functions that are exported for the use for existing subsystems have been changed to check the flags field in struct tpm_chip and use appropriate TPM 2.0 counterpart if TPM_CHIP_FLAG_TPM2 is est. The code for tpm2_calc_ordinal_duration() and tpm2_startup() were originally written by Will Arthur. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Will Arthur <will.c.arthur@intel.com> Reviewed-by: Jasob Gunthorpe <jason.gunthorpe@obsidianresearch.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Tested-by: Peter Huewe <peterhuewe@gmx.de> [phuewe: Fixed copy paste error * 2] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-01-17tpm: device class for tpmJarkko Sakkinen1-0/+29
Added own device class for TPM. Uses MISC_MAJOR:TPM_MINOR for the first character device in order to retain backwards compatibility. Added tpm_dev_release() back attached to the character device. I've been running this code now for a while on my laptop (Lenovo T430S) TrouSerS works perfectly without modifications. I don't believe it breaks anything significantly. The sysfs attributes that have been placed under the wrong place and are against sysfs-rules.txt should be probably left to stagnate under platform device directory and start defining new sysfs attributes to the char device directory. Guidelines for future TPM sysfs attributes should be probably along the lines of - Single flat set of mandatory sysfs attributes. For example, current PPI interface is way way too rich when you only want to use it to clear and activate the TPM. - Define sysfs attribute if and only if there's no way to get the value from ring-3. No attributes for TPM properties. It's just unnecessary maintenance hurdle that we don't want. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jasob Gunthorpe <jason.gunthorpe@obsidianresearch.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Scot Doyle <lkml14@scotdoyle.com> Tested-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-01-17tpm: rename chip->dev to chip->pdevJarkko Sakkinen1-14/+15
Rename chip->dev to chip->pdev to make it explicit that this not the character device but actually represents the platform device. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jasob Gunthorpe <jason.gunthorpe@obsidianresearch.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Tested-by: Scot Doyle <lkml14@scotdoyle.com> Tested-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-01-17tpm: two-phase chip management functionsJarkko Sakkinen1-147/+1
tpm_register_hardware() and tpm_remove_hardware() are called often before initializing the device. The problem is that the device might not be fully initialized when it comes visible to the user space. This patch resolves the issue by diving initialization into two parts: - tpmm_chip_alloc() creates struct tpm_chip. - tpm_chip_register() sets up the character device and sysfs attributes. The framework takes care of freeing struct tpm_chip by using the devres API. The broken release callback has been wiped. ACPI drivers do not ever get this callback. Regards to Jason Gunthorpe for carefully reviewing this part of the code. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jasob Gunthorpe <jason.gunthorpe@obsidianresearch.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Scot Doyle <lkml14@scotdoyle.com> Tested-by: Peter Huewe <peterhuewe@gmx.de> [phuewe: update to upstream changes] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-01-17tpm: merge duplicate transmit_cmd() functionsJarkko Sakkinen1-23/+26
Merged transmit_cmd() functions in tpm-interface.c and tpm-sysfs.c. Added "tpm_" prefix for consistency sake. Changed cmd parameter as opaque. This enables to use separate command structures for TPM1 and TPM2 commands in future. Loose coupling works fine here. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jasob Gunthorpe <jason.gunthorpe@obsidianresearch.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Tested-by: Scot Doyle <lkml14@scotdoyle.com> Tested-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-01-17TPM: Add new TPMs to the tail of the list to prevent inadvertent change of devDavid Howells1-1/+1
Add newly registered TPMs to the tail of the list, not the beginning, so that things that are specifying TPM_ANY_NUM don't find that the device they're using has inadvertently changed. Adding a second device would break IMA, for instance. Cc: stable@vger.kernel.org Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-07-30tpm: Provide a generic means to override the chip returned timeoutsJason Gunthorpe1-21/+41
Some Atmel TPMs provide completely wrong timeouts from their TPM_CAP_PROP_TIS_TIMEOUT query. This patch detects that and returns new correct values via a DID/VID table in the TIS driver. Tested on ARM using an AT97SC3204T FW version 37.16 Cc: <stable@vger.kernel.org> [PHuewe: without this fix these 'broken' Atmel TPMs won't function on older kernels] Signed-off-by: "Berg, Christopher" <Christopher.Berg@atmel.com> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-07-30tpm: missing tpm_chip_put in tpm_get_random()Jarkko Sakkinen1-3/+4
Regression in 41ab999c. Call to tpm_chip_put is missing. This will cause TPM device driver not to unload if tmp_get_random() is called. Cc: <stable@vger.kernel.org> # 3.7+ Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-07-30tpm: Properly clean sysfs entries in error pathStefan Berger1-1/+3
Properly clean the sysfs entries in the error path Cc: <stable@vger.kernel.org> Reported-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06tpm: Use the ops structure instead of a copy in tpm_vendor_specificJason Gunthorpe1-22/+12
This builds on the last commit to use the ops structure in the core and reduce the size of tpm_vendor_specific. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Reviewed-by: Ashley Lai <adlai@linux.vnet.ibm.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06tpm: Create a tpm_class_ops structure and use it in the driversJason Gunthorpe1-2/+8
This replaces the static initialization of a tpm_vendor_specific structure in the drivers with the standard Linux idiom of providing a const structure of function pointers. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Reviewed-by: Ashley Lai <adlai@linux.vnet.ibm.com> [phuewe: did apply manually due to commit 191ffc6bde3 tpm/tpm_i2c_atmel: fix coccinelle warnings] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06tpm: Pull all driver sysfs code into tpm-sysfs.cJason Gunthorpe1-2/+2
The tpm core now sets up and controls all sysfs attributes, instead of having each driver have a unique take on it. All drivers now now have a uniform set of attributes, and no sysfs related entry points are exported from the tpm core module. This also uses the new method used to declare sysfs attributes with DEVICE_ATTR_RO and 'struct attribute *' Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [phuewe: had to apply the tpm_i2c_atmel part manually due to commit 191ffc6bde3fc tpm/tpm_i2c_atmel: fix coccinelle warnings] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06tpm: Move sysfs functions from tpm-interface to tpm-sysfsJason Gunthorpe1-273/+2
CLASS-sysfs.c is a common idiom for linux subsystems. This is the first step to pulling all the sysfs support code from the drivers into tpm-sysfs. This is a plain text copy from tpm-interface with support changes to make it compile. _tpm_pcr_read is made non-static and is called tpm_pcr_read_dev. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06tpm: Pull everything related to /dev/tpmX into tpm-dev.cJason Gunthorpe1-169/+12
CLASS-dev.c is a common idiom for Linux subsystems This pulls all the code related to the miscdev into tpm-dev.c and makes it static. The identical file_operation structs in the drivers are purged and the tpm common code unconditionally creates the miscdev. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Reviewed-by: Ashley Lai <adlai@linux.vnet.ibm.com> [phuewe: tpm_dev_release is now used only in this file, thus the EXPORT_SYMBOL can be dropped and the function be marked as static. It has no other in-kernel users] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22tpm: Rename tpm.c to tpm-interface.cJason Gunthorpe1-0/+1554
This is preparation for making the tpm module multi-file. kbuild does not like having a .c file with the same name as a module. We wish to keep the tpm module name so that userspace doesn't see this change. tpm-interface.c is chosen because the next several commits in the series migrate items into tpm-sysfs.c, tpm-dev.c and tpm-class.c. All that will be left is tpm command processing and interfacing code. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 05:30:00 +0300