summaryrefslogtreecommitdiff
path: root/drivers/char/ipmi
AgeCommit message (Collapse)AuthorFilesLines
2010-09-23ipmi: fix hardcoded ipmi device exit path warningYinghai Lu1-1/+6
When modprobe.conf has options ipmi_si type="kcs" ports=0xCA2 regspacings="4" ipmi_si can be loaded properly, but when try to unload it get: Sep 20 15:00:27 xx abrt: Kerneloops: Reported 1 kernel oopses to Abrt Sep 20 15:00:27 xx abrtd: Directory 'kerneloops-1285020027-1' creation detected Sep 20 15:00:27 xx abrtd: New crash /var/spool/abrt/kerneloops-1285020027-1, processing Sep 20 15:01:09 xx kernel: ------------[ cut here ]------------ Sep 20 15:01:09 xx kernel: WARNING: at drivers/base/driver.c:262 driver_unregister+0x8a/0xa0() Sep 20 15:01:09 xx kernel: Hardware name: Sun Fire x4800 Sep 20 15:01:09 xx kernel: Unexpected driver unregister! Sep 20 15:01:09 xx kernel: Modules linked in: ipmi_si(-) ipmi_msghandler ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf xt_physdev be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb3i iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan tun kvm_intel kvm uinput sg ses enclosure ahci libahci pcspkr i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support igb dca i7core_edac edac_core ext3 jbd mbcache sd_mod crc_t10dif megaraid_sas [last unloaded: ipmi_devintf] Sep 20 15:01:09 xx kernel: Pid: 10625, comm: modprobe Tainted: G W 2.6.36-rc5-tip+ #6 Sep 20 15:01:09 xx kernel: Call Trace: Sep 20 15:01:09 xx kernel: [<ffffffff810600df>] warn_slowpath_common+0x7f/0xc0 Sep 20 15:01:09 xx kernel: [<ffffffff810601d6>] warn_slowpath_fmt+0x46/0x50 Sep 20 15:01:09 xx kernel: [<ffffffff812ff60a>] driver_unregister+0x8a/0xa0 Sep 20 15:01:09 xx kernel: [<ffffffff812ae112>] pnp_unregister_driver+0x12/0x20 Sep 20 15:01:09 xx kernel: [<ffffffffa01d0327>] cleanup_ipmi_si+0x3c/0xa7 [ipmi_si] Sep 20 15:01:09 xx kernel: [<ffffffff81099a60>] sys_delete_module+0x1a0/0x270 Sep 20 15:01:09 xx kernel: [<ffffffff814b7070>] ? do_page_fault+0x150/0x320 Sep 20 15:01:09 xx kernel: [<ffffffff8100b072>] system_call_fastpath+0x16/0x1b Sep 20 15:01:09 xx kernel: ---[ end trace 0d1967161adcee0d ]--- We need to check if ipmi_pnp_driver is loaded before we try to unload it. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-23ipmi: fix acpi probe printYinghai Lu1-5/+5
After d9e1b6c45059ccf ("ipmi: fix ACPI detection with regspacing") we get [ 11.026326] ipmi_si: probing via ACPI [ 11.030019] ipmi_si 00:09: (null) regsize 1 spacing 1 irq 0 [ 11.035594] ipmi_si: Adding ACPI-specified kcs state machine on an old system with only one range for ipmi kcs range. Try to fix it by adding another res pointer. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12Merge branch 'params' of ↵Linus Torvalds1-15/+27
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * 'params' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (22 commits) param: don't deref arg in __same_type() checks param: update drivers/acpi/debug.c to new scheme param: use module_param in drivers/message/fusion/mptbase.c ide: use module_param_named rather than module_param_call param: update drivers/char/ipmi/ipmi_watchdog.c to new scheme param: lock if_sdio's lbs_helper_name and lbs_fw_name against sysfs changes. param: lock myri10ge_fw_name against sysfs changes. param: simple locking for sysfs-writable charp parameters param: remove unnecessary writable charp param: add kerneldoc to moduleparam.h param: locking for kernel parameters param: make param sections const. param: use free hook for charp (fix leak of charp parameters) param: add a free hook to kernel_param_ops. param: silence .init.text references from param ops Add param ops struct for hvc_iucv driver. nfs: update for module_param_named API change AppArmor: update for module_param_named API change param: use ops in struct kernel_param, rather than get and set fns directly param: move the EXPORT_SYMBOL to after the definitions. ...
2010-08-12Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-2/+2
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
2010-08-11ipmi: print info for spmi and smbios paths like acpi and pciYinghai Lu1-1/+11
Print out the reg spacing and size for spmi and smbios so BIOS developers can make them consistent. Also remove extra PFX on the duplicating path. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Corey Minyard <minyard@acm.org> Cc: Matthew Garrett <mjg@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11ipmi: fix memleaking for add_smi when duplicating happenYinghai Lu1-7/+28
Free the temporary info struct when we have duplicated ones. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Corey Minyard <minyard@acm.org> Cc: Matthew Garrett <mjg@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11drivers/char/ipmi/ipmi_si_intf.c: fix warning: variable 'addr_space' set but ↵Justin P. Mattock1-8/+2
not used Fix a warning message generated by GCC, and also updates a web address pointing to a pdf containing information. CC [M] drivers/char/ipmi/ipmi_si_intf.o drivers/char/ipmi/ipmi_si_intf.c: In function 'try_init_spmi': drivers/char/ipmi/ipmi_si_intf.c:2016:8: warning: variable 'addr_space' set but not used Signed-off-by: Sergey V. <sftp.mtuci@gmail.com> Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11param: update drivers/char/ipmi/ipmi_watchdog.c to new schemeRusty Russell1-15/+27
This is one of the most interesting users of module parameters in the tree, so weaning it off the old-style non-const module_param_call scheme is a useful exercise. I was confused by set_param_int/get_param_int (vs. the normal param_set_int and param_get_int), so I renamed set_param_int to set_param_timeout, and re-used param_get_int directly instead of get_param_int. I also implemented param_check_wdog_ifnum and param_check_timeout, so now the ifnum_to_use and timeout/pretimeout parameters can just use plain module_param(). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Corey Minyard <minyard@acm.org> Cc: openipmi-developer@lists.sourceforge.net
2010-08-10ipmi: fix ACPI detection with regspacingYinghai Lu1-0/+8
After the commit that changed ipmi_si detecting sequence from SMBIOS/ACPI to ACPI/SMBIOS, | commit 754d453185275951d39792865927ec494fa1ebd8 | Author: Matthew Garrett <mjg@redhat.com> | Date: Wed May 26 14:43:47 2010 -0700 | | ipmi: change device discovery order | | The ipmi spec provides an ordering for si discovery. Change the driver to | match, with the exception of preferring smbios to SPMI as HPs (at least) | contain accurate information in the former but not the latter. ipmi_si can not be initialized. [ 138.799739] calling init_ipmi_devintf+0x0/0x109 @ 1 [ 138.805050] ipmi device interface [ 138.818131] initcall init_ipmi_devintf+0x0/0x109 returned 0 after 12797 usecs [ 138.822998] calling init_ipmi_si+0x0/0xa90 @ 1 [ 138.840276] IPMI System Interface driver. [ 138.846137] ipmi_si: probing via ACPI [ 138.849225] ipmi_si 00:09: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 138.864438] ipmi_si: Adding ACPI-specified kcs state machine [ 138.870893] ipmi_si: probing via SMBIOS [ 138.880945] ipmi_si: Adding SMBIOS-specified kcs state machineipmi_si: duplicate interface [ 138.896511] ipmi_si: probing via SPMI [ 138.899861] ipmi_si: Adding SPMI-specified kcs state machineipmi_si: duplicate interface [ 138.917095] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 138.928658] ipmi_si: Interface detection failed [ 138.953411] initcall init_ipmi_si+0x0/0xa90 returned 0 after 110847 usecs in smbios has DMI/SMBIOS Handle 0x00C5, DMI type 38, 18 bytes IPMI Device Information Interface Type: KCS (Keyboard Control Style) Specification Version: 2.0 I2C Slave Address: 0x00 NV Storage Device: Not Present Base Address: 0x0000000000000CA2 (I/O) Register Spacing: 32-bit Boundaries in DSDT has Device (BMC) { Name (_HID, EisaId ("IPI0001")) Method (_STA, 0, NotSerialized) { If (LEqual (OSN, Zero)) { Return (Zero) } Return (0x0F) } Name (_STR, Unicode ("IPMI_KCS")) Name (_UID, Zero) Name (_CRS, ResourceTemplate () { IO (Decode16, 0x0CA2, // Range Minimum 0x0CA2, // Range Maximum 0x00, // Alignment 0x01, // Length ) IO (Decode16, 0x0CA6, // Range Minimum 0x0CA6, // Range Maximum 0x00, // Alignment 0x01, // Length ) }) Method (_IFT, 0, NotSerialized) { Return (One) } Method (_SRV, 0, NotSerialized) { Return (0x0200) } } so the reg spacing should be 4 instead of 1. Try to calculate regspacing for this kind of system. Observed on a Sun Fire X4800. Other OSes work and pass certification. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Matthew Garrett <mjg@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Myron Stowe <myron.stowe@hp.com> Cc: Corey Minyard <minyard@acm.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-06of/device: Replace struct of_device with struct platform_deviceGrant Likely1-2/+2
of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
2010-06-30ipmi: set schedule_timeout_wait() value back to oneMartin Wilck1-1/+1
Fix a regression introduced by ae74e823cb7d ("ipmi: add parameter to limit CPU usage in kipmid"). Some systems were seeing CPU usage go up dramatically with the recent changes to try to reduce timer usage in the IPMI driver. This was traced down to schedule_timeout_interruptible(1) being changed to schedule_timeout_interruptbile(0). Revert that part of the change. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16147 Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Cc: <stable@kernel.org> [2.6.34.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-30ipmi: make sure drivers were registered before unregistering themMatthew Garrett1-4/+17
The ipmi code will never register a PCI or Open Firmware driver if a hardcoded device is provided by the user by providing device addresses via the module parameters. This can cause us to attempt to unregister a driver that was never registered, resulting in an oops. Keep track of registration in order to avoid this. Fixes a post-2.6.34 regression. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: handle run_to_completion properly in deliver_recv_msg()Jiri Kosina1-3/+8
If run_to_completion flag is set, it means that we are running in a single-threaded mode, and thus no locks are held. This fixes a deadlock when IPMI notifier is being called during panic. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Corey Minyard <minyard@acm.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: update driver to use dev_printk and its constructsMyron Stowe2-127/+107
Update core IPMI driver printk()'s with dev_printk(), and its constructs, to provide additional device topology information. An example of the additional device topology for a PNP device - ipmi_si 00:02: probing via ACPI ipmi_si 00:02: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0 ipmi_si 00:02: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, ... ipmi_si 00:02: IPMI kcs interface initialized and for a PCI device - ipmi_si 0000:01:04.6: probing via PCI ipmi_si 0000:01:04.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ipmi_si 0000:01:04.6: [mem 0xf1ef0000-0xf1ef00ff] regsize 1 spaci... ipmi_si 0000:01:04.6: IPMI kcs interface initialized [minyard@acm.org: rework to fix rejects, extended it a bit] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Corey Minyard <minyard@acm.org> Cc: Zhao Yakui <yakui.zhao@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: convert tracking of the ACPI device pointer to a PNP deviceMyron Stowe1-1/+1
Convert PNP patch (git 9e368fa011d4e0aa050db348d69514900520e40b) to maintain a pointer to a PNP device, 'pnp_dev', instead of the ACPI device, 'acpi_dev', that is currently being tracked with PNP based IPMI device discovery. Signed-off-by: Myron Stowe <myron.stowe@hp.com> Acked-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Corey Minyard <minyard@acm.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: change timeout and event poll to one secondCorey Minyard1-2/+2
The timeouts in IPMI are in the 1-5 second range in message handling, so a 1 second timeout is a reasonable thing to do. This should help with reducing power consumption on idle systems. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: attempt to register multiple SIs of the same typeMatthew Garrett1-7/+21
Some odd systems may have multiple BMCs, and we want to be able to support them. Let's make the assumption that if a system legitimately has multiple BMCs then each BMC's SI will be of the same type, and also that we won't see multiple SIs of the same type unless we have multiple BMCs. If these hold true then we should register all SIs of the same type. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: reduce pollingMatthew Garrett1-7/+13
We can reasonably alter the poll rate depending on whether we're performing a transaction or merely waiting for an event. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: reduce polling when interrupts are availableMatthew Garrett1-2/+10
If we're not currently in the middle of a transaction, and if we have interrupts, there's no real reason to poll the controller more frequently than the core IPMI code does. Set the interrupt_disabled flag appropriately as the interrupt state changes, and make the timeout code reset itself only if the transaction is incomplete or we have no interrupts. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: change device discovery orderMatthew Garrett1-11/+12
The ipmi spec provides an ordering for si discovery. Change the driver to match, with the exception of preferring smbios to SPMI as HPs (at least) contain accurate information in the former but not the latter. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: only register one si per bmcMatthew Garrett1-2/+27
Only register one si per bmc. Use any user-provided devices first, followed by the first device with an irq, followed by the first device discovered. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: split device discovery and registrationMatthew Garrett1-46/+84
The ipmi spec indicates that we should only make use of one si per bmc, so separate device discovery and registration to make that possible. [thenzl@redhat.com: fix mutex use] Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: change addr_source to an enum rather than stringsMatthew Garrett1-19/+25
Switch from a char* to an enum to identify the address source of SIs, making it easier to handle them appropriately during registration. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24Merge branch 'bkl/ioctl' of ↵Linus Torvalds2-7/+36
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: uml: Pushdown the bkl from harddog_kern ioctl sunrpc: Pushdown the bkl from sunrpc cache ioctl sunrpc: Pushdown the bkl from ioctl autofs4: Pushdown the bkl from ioctl uml: Convert to unlocked_ioctls to remove implicit BKL ncpfs: BKL ioctl pushdown coda: Clean-up whitespace problems in pioctl.c coda: BKL ioctl pushdown drivers: Push down BKL into various drivers isdn: Push down BKL into ioctl functions scsi: Push down BKL into ioctl functions dvb: Push down BKL into ioctl functions smbfs: Push down BKL into ioctl function coda/psdev: Remove BKL from ioctl function um/mmapper: Remove BKL usage sn_hwperf: Kill BKL usage hfsplus: Push down BKL into ioctl function
2010-05-22of: Remove duplicate fields from of_platform_driverGrant Likely1-2/+5
.name, .match_table and .owner are duplicated in both of_platform_driver and device_driver. This patch is a removes the extra copies from struct of_platform_driver and converts all users to the device_driver members. This patch is a pretty mechanical change. The usage model doesn't change and if any drivers have been missed, or if anything has been fixed up incorrectly, then it will fail with a compile time error, and the fixup will be trivial. This patch looks big and scary because it touches so many files, but it should be pretty safe. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sean MacLennan <smaclennan@pikatech.com>
2010-05-19of: Always use 'struct device.of_node' to get device node pointer.Grant Likely1-2/+2
The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-17drivers: Push down BKL into various driversArnd Bergmann2-7/+36
These are the last remaining device drivers using the ->ioctl file operation in the drivers directory (except from v4l drivers). [fweisbec: drop i8k pushdown as it has been done from procfs pushdown branch already] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-03-19sysfs: fix sysfs lockdep warning in ipmi codeGreg Kroah-Hartman1-0/+10
This fixes a sysfs lockdep warning in the ipmi code. Thanks to Eric Biederman and Yinghai Lu for the original versions of the patch, unfortunatly they did not submit them in a form they could be applied in. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-13ipmi: fix slave_addrs setting to actually workBela Lubkin1-2/+3
Actually use the slave_addrs module parameter if it is specified, and make things consistent about passing zero in for the slave address for the default. Signed-off-by: Bela Lubkin <blubkin@vmware.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-13ipmi: add parameter to limit CPU usage in kipmidMartin Wilck1-2/+64
In some cases kipmid can use a lot of CPU. This adds a way to tune the CPU used by kipmid to help in those cases. By setting kipmid_max_busy_us to a value between 100 and 500, it is possible to bring down kipmid CPU load to practically 0 without loosing too much ipmi throughput performance. Not setting the value, or setting the value to zero, operation is unaffected. Signed-off-by: Martin Wilck <martin.wilck@ts.fujitsu.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-30ACPI: fix ACPI=n allmodconfig buildIngo Molnar1-2/+2
Today's -tip failed to build because commit 9e368fa011d4e0aa050db348d69514900520e40b ("ipmi: add PNP discovery (ACPI namespace via PNPACPI)") from today's upstream kernel causes the following build failure on x86, for CONFIG_ACPI=n && CONFIG_IPMI_SI=y: drivers/char/ipmi/ipmi_si_intf.c:3208: error: 'ipmi_pnp_driver' undeclared (first use in this function) drivers/char/ipmi/ipmi_si_intf.c:3208: error: (Each undeclared identifier is reported only once drivers/char/ipmi/ipmi_si_intf.c:3208: error: for each function it appears in.) drivers/char/ipmi/ipmi_si_intf.c:3334: error: 'ipmi_pnp_driver' undeclared (first use in this function) The reason is that the ipmi_pnp_driver depends on ACPI facilities and is only made available under ACPI - while the registration and unregistration is made dependent on CONFIG_PNP: #ifdef CONFIG_PNP pnp_register_driver(&ipmi_pnp_driver); #endif The solution is to only register this driver under ACPI. (Also, the CONFIG_PNP dependency is not needed because pnp_register_driver() is stubbed out in the !CONFIG_PNP case.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-16Merge branch 'release' of ↵Linus Torvalds1-9/+109
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (117 commits) ACPI processor: Fix section mismatch for processor_add() ACPI: Add platform-wide _OSC support. ACPI: cleanup pci_root _OSC code. ACPI: Add a generic API for _OSC -v2 msi-wmi: depend on backlight and fix corner-cases problems msi-wmi: switch to using input sparse keymap library msi-wmi: replace one-condition switch-case with if statement msi-wmi: remove unused field 'instance' in key_entry structure msi-wmi: remove custom runtime debug implementation msi-wmi: rework init msi-wmi: remove useless includes X86 drivers: Introduce msi-wmi driver Toshiba Bluetooth Enabling driver (RFKill handler v3) ACPI: fix for lapic_timer_propagate_broadcast() acpi_pad: squish warning ACPI: dock: minor whitespace and style cleanups ACPI: dock: add struct dock_station * directly to platform device data ACPI: dock: dock_add - hoist up platform_device_register_simple() ACPI: dock: remove global 'dock_device_name' ACPI: dock: combine add|alloc_dock_dependent_device (v2) ...
2009-12-16drivers/char/ipmi: Use KCS_IDLE_STATEJulia Lawall1-1/+1
KCS_IDLE and KCS_IDLE state have the same value, but in this function the constants ending in _STATE are compared to the state variable. Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Core Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16Merge branch 'ipmi' into releaseLen Brown1-9/+109
2009-12-16ipmi: add PNP discovery (ACPI namespace via PNPACPI)Bjorn Helgaas1-0/+104
This allows ipmi_si_intf.c to claim IPMI devices described in the ACPI namespace. Using PNP makes it simpler to parse the IRQ/IO/memory resources of the device. We look at any SPMI tables before looking for devices in the namespace. This is based on ipmi_pci_probe(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-16ipmi: refer to table as "SPMI", not "ACPI"Bjorn Helgaas1-5/+5
This discovery method uses the SPMI table, not the ACPI namespace. In the future, we will look in the namespace, so let's refer to the table as "SPMI" and save "ACPI" for the namespace. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-16ipmi: remove unused PCI probe codeBjorn Helgaas1-4/+0
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-11-18sysctl: Drop & in front of every proc_handler.Eric W. Biederman1-1/+1
For consistency drop & in front of every proc_handler. Explicity taking the address is unnecessary and it prevents optimizations like stubbing the proc_handlers to NULL. Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joe Perches <joe@perches.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-12sysctl drivers: Remove dead binary sysctl supportEric W. Biederman1-6/+3
Now that sys_sysctl is a wrapper around /proc/sys all of the binary sysctl support elsewhere in the tree is dead code. Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Neil Brown <neilb@suse.de> Cc: "James E.J. Bottomley" <James.Bottomley@suse.de> Acked-by: Clemens Ladisch <clemens@ladisch.de> for drivers/char/hpet.c Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-10-05headers: remove sched.h from poll.hAlexey Dobriyan2-0/+2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-21trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.cPeter Huewe1-2/+2
Trivial patch which adds the __init to the module_init function of drivers/char/ipmi/ipmy_poweroff.c and corrects the location of __exit for the cleanup function. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-16ipmi: remove driver_data direct access of struct deviceGreg Kroah-Hartman1-2/+2
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Cc: openipmi-developer@lists.sourceforge.net Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-22ipmi: fix ipmi_si modprobe hangCorey Minyard1-6/+7
Instead of queuing IPMB messages before channel initialization, just throw them away. Nobody will be listening for them at this point, anyway, and they will clog up the queue and nothing will be delivered if we queue them. Also set the current channel to the number of channels, as this value is used to tell if the channel information has been initialized. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Ferenc Wagner <wferi@niif.hu> Cc: Dan Frazier <dannf@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-22ipmi: add oem message handlingdann frazier1-5/+133
Enable userspace to receive messages that a BMC transmits using an OEM medium. This is used by the HP iLO2. Based on code originally written by Patrick Schoeller. Signed-off-by: dann frazier <dannf@hp.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-22ipmi: fix statistics counting issuesCorey Minyard1-22/+51
Bela Lubkin noticed that the statistics for send IPMB and LAN commands in the IPMI driver could be incremented even if an error occurred. Move the increments to the proper place to avoid this. Also add some statistics for retransmissions that failed, and some little helper functions to neaten up the code a little. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Bela Lubkin <blubkin@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-22ipmi: test for event buffer before usingCorey Minyard1-29/+119
The IPMI driver would attempt to use the event buffer even if that didn't exist on the BMC. This patch modified the IPMI driver to check for the event buffer's existence before trying to use it. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-22ipmi: fix platform return checkCorey Minyard1-1/+1
The wrong return value is being tested when allocating a platform device in the IPMI SI code. Check the right value. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-31proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan2-11/+7
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-11-13Fix platform drivers that crash on suspend/resumeDarrick J. Wong2-16/+20
It turns out that if one registers a struct platform_device, the platform device code expects that platform_device.device->driver points to a struct driver inside a struct platform_driver. This is not the case with the ipmi-si, ipmi-msghandler and ibmaem drivers, which causes the suspend/resume hook functions to jump off into nowhere, causing a crash. Make this assumption hold true for these three drivers. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Greg KH <greg@kroah.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01saner FASYNC handling on file closeAl Viro2-3/+0
As it is, all instances of ->release() for files that have ->fasync() need to remember to evict file from fasync lists; forgetting that creates a hole and we actually have a bunch that *does* forget. So let's keep our lives simple - let __fput() check FASYNC in file->f_flags and call ->fasync() there if it's been set. And lose that crap in ->release() instances - leaving it there is still valid, but we don't have to bother anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>