summaryrefslogtreecommitdiff
path: root/drivers/bus
AgeCommit message (Collapse)AuthorFilesLines
2020-06-07Merge tag 'char-misc-5.8-rc1' of ↵Linus Torvalds5-156/+362
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ...
2020-06-05Merge tag 'arm-drivers-5.8' of ↵Linus Torvalds4-0/+767
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM/SoC driver updates from Arnd Bergmann: "These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra" * tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits) clk: sprd: fix compile-testing bus: bt1-axi: Build the driver into the kernel bus: bt1-apb: Build the driver into the kernel bus: bt1-axi: Use sysfs_streq instead of strncmp bus: bt1-axi: Optimize the return points in the driver bus: bt1-apb: Use sysfs_streq instead of strncmp bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method bus: bt1-apb: Fix show/store callback identations bus: bt1-apb: Include linux/io.h dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding memory: Add Baikal-T1 L2-cache Control Block driver bus: Add Baikal-T1 APB-bus driver bus: Add Baikal-T1 AXI-bus driver dt-bindings: bus: Add Baikal-T1 APB-bus binding dt-bindings: bus: Add Baikal-T1 AXI-bus binding staging: tegra-video: fix V4L2 dependency tee: fix crypto select drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static soc: ti: add k3 platforms chipid module driver dt-bindings: soc: ti: add binding for k3 platforms chipid module ...
2020-06-05Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds5-78/+442
Pull ARM SoC updates from Arnd Bergmann: "One new platform gets added, the Realtek RTD1195, which is an older Cortex-a7 based relative of the RTD12xx chips that are already supported in arch/arm64. The platform may also be extended to support running 32-bit kernels on those 64-bit chips for memory-constrained machines. In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally released in 2016 as one of the last high-end 32-bit designs. There is ongoing cleanup for the integrator, tegra, imx, and omap2 platforms, with integrator getting very close to the goal of having zero code in arch/arm/, and omap2 moving more of the chip specifics from old board code into device tree files. The Versatile Express platform is made more modular, with built-in drivers now becoming loadable modules. This is part of a greater effort for the Android OS to have a common kernel binary for all platforms and any platform specific code in loadable modules. The PXA platform drops support for Compulab's pxa2xx boards that had rather unusual flash and PCI drivers but no known users remaining. All device drivers specific to those boards can now get removed as well. Across platforms, there is ongoing cleanup, with Geert and Rob revisiting some a lot of Kconfig options" * tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) ARM: omap2: fix omap5_realtime_timer_init definition ARM: zynq: Don't select CONFIG_ICST ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE ARM: davinci: fix build failure without I2C power: reset: vexpress: fix build issue power: vexpress: cleanup: use builtin_platform_driver power: vexpress: add suppress_bind_attrs to true Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG" MAINTAINERS: pxa: remove Compulab arm/pxa support ARM: pxa: remove Compulab pxa2xx boards bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe() soc: imx: move cpu code to drivers/soc/imx ARM: imx: move cpu definitions into a header ARM: imx: use device_initcall for imx_soc_device_init ARM: imx: pcm037: make pcm970_sja1000_platform_data static bus: ti-sysc: Timers no longer need legacy quirk handling ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter ARM: dts: Configure system timers for omap2 ARM: dts: Configure system timers for ti81xx ...
2020-05-28bus: bt1-axi: Build the driver into the kernelSerge Semin1-1/+1
Alas the method trigger_all_cpu_backtrace() isn't exported by the kernel, but we need to have it called in case of the bus errors detected to get a better description of a possible cause of the error. Let's disable the ability to build the driver as a loadable kernel module then. Note In future the driver will support the AXI-bus interconnect capability, so we'd have to make it built into the kernel anyway. Link: https://lore.kernel.org/r/20200528193113.17372-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-apb: Build the driver into the kernelSerge Semin1-1/+1
Seeing trigger_all_cpu_backtrace() isn't exported from the kernel and since calling it is a very important part of driver, which may provide a better description of a possible cause of the error, let's disable the ability to build the driver as a loadable kernel module. Link: https://lore.kernel.org/r/20200528193113.17372-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-axi: Use sysfs_streq instead of strncmpSerge Semin1-2/+2
There is a ready-to-use method to compare a retrieved from a sysfs node string with another string. It treats both NUL and newline-then-NUL as equivalent string terminations. So use it instead of manually truncating the line length in the strncmp() method. Link: https://lore.kernel.org/r/20200528145050.5203-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-axi: Optimize the return points in the driverSerge Semin1-12/+6
It's better to have a single return statement where it's applicable instead of returning from a conditional statement if-clause. Let's do this in the request registers, clock and IRQ methods. Link: https://lore.kernel.org/r/20200528145050.5203-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-apb: Use sysfs_streq instead of strncmpSerge Semin1-2/+2
There is a ready-to-use method to compare a retrieved from a sysfs node string with another string. It treats both NUL and newline-then-NUL as equivalent string terminations. So use it instead of manually truncating the line length in the strncmp() method. Link: https://lore.kernel.org/r/20200528145050.5203-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs methodSerge Semin1-4/+2
Indeed it's more optimal to use the PTR_ERR_OR_ZERO() macro there instead of having two return points. Link: https://lore.kernel.org/r/20200528145050.5203-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-apb: Fix show/store callback identationsSerge Semin1-4/+4
After fixing the sysfs calback return value the functions argumnets identations have been left as before the fix. That made the argments declarations being unaligned with respect to the space surrounded by the parentheses. Link: https://lore.kernel.org/r/20200528145050.5203-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-apb: Include linux/io.hSerge Semin1-0/+1
It must be included since we are using readl() method here. Link: https://lore.kernel.org/r/20200528145050.5203-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: Add Baikal-T1 APB-bus driverSerge Semin3-0/+438
Baikal-T1 AXI-APB bridge is used to access the SoC subsystem CSRs. IO requests are routed to this bus by means of the DW AMBA 3 AXI Interconnect. In case if an attempted APB transaction stays with no response for a pre-defined time an interrupt occurs and the bus gets freed for a next operation. This driver provides the interrupt handler to detect the erroneous address, prints an error message about the address fault, updates an errors counter. The counter and the APB-bus operations timeout can be accessed via corresponding sysfs nodes. A dedicated sysfs-node can be also used to artificially cause the bus errors described above. [arnd: fix build warnings for missing includes and wrong return types] Link: https://lore.kernel.org/r/20200526125928.17096-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Paul Burton <paulburton@kernel.org> Cc: Olof Johansson <olof@lixom.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: soc@kernel.org Cc: devicetree@vger.kernel.org Reported-by: kbuild test robot <lkp@intel.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: Add Baikal-T1 AXI-bus driverSerge Semin3-0/+336
AXI3-bus is the main communication bus connecting all high-speed peripheral IP-cores with RAM controller and MIPS P5600 cores on Baikal-T1 SoC. Bus traffic arbitration is done by means of DW AMBA 3 AXI Interconnect (so called AXI Main Interconnect) routing IO requests from one SoC block to another. This driver provides a way to detect any bus protocol errors and device not responding situations by means of an embedded on top of the interconnect errors handler block (EHB). AXI Interconnect QoS arbitration tuning is currently unsupported. The bus doesn't provide a way to detect the interconnected devices, so they are supposed to be statically defined like by means of the simple-bus sub-nodes. [arnd: fix build warnings for missing includes and wrong return types] Link: https://lore.kernel.org/r/20200526125928.17096-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Paul Burton <paulburton@kernel.org> Cc: Olof Johansson <olof@lixom.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: soc@kernel.org Cc: devicetree@vger.kernel.org Reported-by: kbuild test robot <lkp@intel.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-26Merge tag 'omap-for-v5.8/timer-signed' of ↵Arnd Bergmann1-7/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc System timer changes for omaps for v5.8 merge window This series of changes finally gets the legacy omap dual-mode timer and 32k counter system timer updated to use drivers/clocksource and device tree data. And we can now remove the unused legacy platform data. These changes are based on an immutable clocksource branch set up by Daniel Lezcano. * tag 'omap-for-v5.8/timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Timers no longer need legacy quirk handling ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter ARM: dts: Configure system timers for omap2 ARM: dts: Configure system timers for ti81xx ARM: dts: Configure system timers for omap3 ARM: dts: Configure system timers for omap5 and dra7 ARM: dts: Configure system timers for omap4 ARM: dts: Configure system timers for am437x ARM: dts: Configure system timers for am335x ARM: OMAP2+: Add omap_init_time_of() bus: ti-sysc: Ignore timer12 on secure omap3 clk: ti: dm816: enable sysclk6_ck on init clocksource/drivers/timer-ti-dm: Fix warning for set but not used clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support clocksource/drivers/timer-ti-32k: Add support for initializing directly Link: https://lore.kernel.org/r/pull-1590169577-735045@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-26bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()Wei Yongjun1-2/+2
In case of error, the function of_find_matching_node() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Link: https://lore.kernel.org/r/20200525091634.8274-1-linus.walleij@linaro.org Fixes: ccea5e8a5918 ("bus: Add driver for Integrator/AP logic modules") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200520032150.165388-1-weiyongjun1@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-22bus: mhi: core: Handle syserr during power_upJeffrey Hugo1-0/+27
The MHI device may be in the syserr state when we attempt to init it in power_up(). Since we have no local state, the handling is simple - reset the device and wait for it to transition out of the reset state. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-15-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Handle write lock properly in mhi_pm_m0_transitionHemant Kumar1-3/+7
Take write lock only to protect db_mode member of mhi channel. This allows rest of the mhi channels to just take read lock which fine grains the locking. It prevents channel readers to starve if they try to enter critical section after a writer. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-14-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Do not process SYS_ERROR if RDDM is supportedHemant Kumar1-3/+8
Devices that support RDDM do not require processing SYS_ERROR as it is deemed redundant. Avoid SYS_ERROR processing if RDDM is supported by the device. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-13-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Skip handling BHI irq if MHI reg access is not allowedHemant Kumar1-7/+14
Driver continues handling of BHI interrupt even if MHI register access is not allowed. By doing so it calls the status call back and performs early notification for the MHI client. This is not needed when MHI register access is not allowed. Hence skip the handling in this case and return. Also add debug log to print device state, local EE and device EE when reg access is valid. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-12-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Handle disable transitions in state workerHemant Kumar3-1/+12
Mission mode transition is handled by state worker thread but power off is not. There is a possibility while mission mode transition is in progress which calls MHI client driver probe, power off is issued by MHI controller. This results into client driver probe and remove running in parallel and causes use after free situation. By queuing disable transition work when mission mode is in progress prevents the race condition. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-11-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Remove the system error worker threadHemant Kumar4-23/+20
Remove the system error worker thread and instead have the execution environment worker handle that transition to serialize processing and avoid any possible race conditions during shutdown. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-10-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Ensure non-zero session or sequence ID values are usedBhaumik Bhatt2-8/+8
While writing any sequence or session identifiers, it is possible that the host could write a zero value, whereas only non-zero values should be supported writes to those registers. Ensure that the host does not write a non-zero value for them and also log them in debug messages. A macro is introduced to simplify this check and the existing checks are also converted to use this macro. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-9-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Improve debug logs for loading firmwareBhaumik Bhatt1-3/+18
Add log messages to track boot flow errors and timeouts in SBL or AMSS firmware loading to aid in debug. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-8-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Return appropriate error codes for AMSS load failureBhaumik Bhatt1-11/+12
When loading AMSS firmware using BHIe protocol, return -ETIMEDOUT if no response is received within the timeout or return -EIO in case of a protocol returned failure or an MHI error state. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-7-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Handle firmware load using state workerBhaumik Bhatt4-21/+5
Upon power up, driver queues firmware worker thread if the execution environment is PBL. Firmware worker is blocked with a timeout until state worker gets a chance to run and unblock firmware worker. An endpoint power up failure can be seen if state worker gets a chance to run after firmware worker has timed out. Remove this dependency and handle firmware load directly using state worker thread. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-6-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Read transfer length from an event properlyHemant Kumar1-2/+7
When MHI Driver receives an EOT event, it reads xfer_len from the event in the last TRE. The value is under control of the MHI device and never validated by Host MHI driver. The value should never be larger than the real size of the buffer but a malicious device can set the value 0xFFFF as maximum. This causes driver to memory overflow (both read or write). Fix this issue by reading minimum of transfer length from event and the buffer length provided. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-5-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Add range check for channel id received in event ringHemant Kumar1-11/+29
MHI data completion handler function reads channel id from event ring element. Value is under the control of MHI devices and can be any value between 0 and 255. In order to prevent out of bound access add a bound check against the max channel supported by controller and skip processing of that event ring element. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Cache intmod from mhi event to mhi channelHemant Kumar1-0/+4
Driver is using zero initialized intmod value from mhi channel when configuring TRE for bei field. This prevents interrupt moderation to take effect in case it is supported by an event ring. Fix this by copying intmod value from associated event ring to mhi channel upon registering mhi controller. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Refactor mhi queue APIsHemant Kumar2-63/+47
Move all the common code to generate TRE from mhi_queue_buf, mhi_queue_dma and mhi_queue_skb to mhi_gen_tre. This helps to centralize the TRE generation code which makes any future bug fixing easier to manage in these APIs. Suggested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19bus: ti-sysc: Timers no longer need legacy quirk handlingTony Lindgren1-7/+7
As timers no longer need legacy quirk handling, let's move them to the CONFIG_DEBUG section to make it easier to see which drivers still need more work. Let's also add detection for few more older timer revisions while at it as that makes CONFIG_DEBUG output easier to read with proper names. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-05-19bus: ti-sysc: Ignore timer12 on secure omap3Tony Lindgren1-0/+11
Some early omap3 boards use timer12 for system timer, but for secure SoCs like on n900 it's not accessible. Likely we will be configuring unavailable devices for other SoCs too based on runtime SoC detection, so let's use a switch to start with. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Rob Herring <robh@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-05-16Merge tag 'vexpress-modules-for-soc-v2' of ↵Arnd Bergmann2-70/+286
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into arm/soc VExpress modularization This series enables building various Versatile Express platform drivers as modules. The primary target is the Fast Model FVP which is supported in Android. As Android is moving towards their GKI, or generic kernel, the hardware support has to be in modules. Currently ARCH_VEXPRESS enables several built-in only drivers. Some of these are needed, but some are only needed for older 32-bit VExpress platforms and can just be disabled. * tag 'vexpress-modules-for-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: ARM: vexpress: Don't select VEXPRESS_CONFIG bus: vexpress-config: Support building as module vexpress: Move setting master site to vexpress-config bus bus: vexpress-config: simplify config bus probing bus: vexpress-config: Merge vexpress-syscfg into vexpress-config mfd: vexpress-sysreg: Support building as a module mfd: vexpress-sysreg: Use devres API variants mfd: vexpress-sysreg: Drop unused syscon child devices mfd: vexpress-sysreg: Drop selecting CONFIG_CLKSRC_MMIO clk: vexpress-osc: Support building as a module clk: vexpress-osc: Use the devres clock API variants clk: versatile: Only enable SP810 on 32-bit by default clk: versatile: Rework kconfig structure amba: Retry adding deferred devices at late_initcall arm64: vexpress: Don't select CONFIG_POWER_RESET_VEXPRESS ARM: vexpress: Move vexpress_flags_set() into arch code Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-15bus: mhi: core: Fix some error return codeWei Yongjun1-0/+2
Fix to return negative error code from the error handling case instead of 0 in mhi_init_dev_ctxt() and mhi_driver_probe(). Fixes: 3000f85b8f47 ("bus: mhi: core: Add support for basic PM operations") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200509075654.175002-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-13bus: vexpress-config: Support building as moduleRob Herring2-7/+5
Enable building vexpress-config driver as a module. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-13vexpress: Move setting master site to vexpress-config busRob Herring1-4/+33
There's only a single caller of vexpress_config_set_master() from vexpress-sysreg.c. Let's just make the registers needed available to vexpress-config and move all the code there. The registers needed aren't used anywhere else either. With this, we can get rid of the private API between these 2 drivers. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-13bus: vexpress-config: simplify config bus probingRob Herring1-97/+21
The vexpress-config initialization is dependent on the vexpress-syscfg driver probing. As vexpress-config was not a driver, deferred probe could not be used and instead initcall ordering was relied upon. This is fragile and doesn't work for modules. Let's move the config bus init into the vexpress-syscfg probe. This eliminates the initcall ordering requirement and the need to create a struct device and the "vexpress-config" class. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-13bus: vexpress-config: Merge vexpress-syscfg into vexpress-configRob Herring1-9/+274
The only thing that vexpress-syscfg does is provide a regmap to vexpress-config bus child devices. There's little reason to have 2 components for this. The current structure with initcall ordering requirements makes turning these components into modules more difficult. So let's start to simplify things and merge vexpress-syscfg into vexpress-config. There's no functional change in this commit and it's still separate components until subsequent commits. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-11Merge 5.7-rc5 into char-misc-nextGreg Kroah-Hartman4-21/+13
We want the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05bus: mhi: core: Fix channel device name conflictJeffrey Hugo1-1/+2
When multiple instances of the same MHI product are present in a system, we can see a splat from mhi_create_devices() - "sysfs: cannot create duplicate filename". This is because the device names assigned to the MHI channel devices are non-unique. They consist of the channel's name, and the channel's pipe id. For identical products, each instance is going to have the same set of channel (both in name and pipe id). To fix this, we prepend the device name of the parent device that the MHI channels belong to. Since different instances of the same product should have unique device names, this makes the MHI channel devices for each product also unique. Additionally, remove the pipe id from the MHI channel device name. This is an internal detail to the MHI product that provides little value, and imposes too much device specific internal details to userspace. It is expected that channel with a specific name (ie "SAHARA") has a specific client, and it does not matter what pipe id that channel is enumerated on. The pipe id is an internal detail between the MHI bus, and the hardware. The client is not expected to make decisions based on the pipe id, and to do so would require the client to have intimate knowledge of the hardware, which is inappropiate as it may violate the layering provided by the MHI bus. The limitation of doing this is that each product may only have one instance of a channel by a unique name. This limitation is appropriate given the usecases of MHI channels. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-7-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05bus: mhi: core: Offload register accesses to the controllerJeffrey Hugo3-14/+4
When reading or writing MHI registers, the core assumes that the physical link is a memory mapped PCI link. This assumption may not hold for all MHI devices. The controller knows what is the physical link (ie PCI, I2C, SPI, etc), and therefore knows the proper methods to access that link. The controller can also handle link specific error scenarios, such as reading -1 when the PCI link went down. Therefore, it is appropriate that the MHI core requests the controller to make register accesses on behalf of the core, which abstracts the core from link specifics, and end up removing an unnecessary assumption. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-5-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05bus: mhi: core: Remove link_status() callbackJeffrey Hugo2-7/+4
If the MHI core detects invalid data due to a PCI read, it calls into the controller via link_status() to double check that the link is infact down. All in all, this is pretty pointless, and racy. There are no good reasons for this, and only drawbacks. Its pointless because chances are, the controller is going to do the same thing to determine if the link is down - attempt a PCI access and compare the result. This does not make the link status decision any smarter. Its racy because its possible that the link was down at the time of the MHI core access, but then recovered before the controller access. In this case, the controller will indicate the link is not down, and the MHI core will precede to use a bad value as the MHI core does not attempt to retry the access. Retrying the access in the MHI core is a bad idea because again, it is racy - what if the link is down again? Furthermore, there may be some higher level state associated with the link status, that is now invalid because the link went down. The only reason why the MHI core could see "invalid" data when doing a PCI access, that is actually valid, is if the register actually contained the PCI spec defined sentinel for an invalid access. In this case, it is arguable that the MHI implementation broken, and should be fixed, not worked around. Therefore, remove the link_status() callback before anyone attempts to implement it. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05bus: mhi: core: Make sure to powerdown if mhi_sync_power_up failsJeffrey Hugo1-1/+5
Powerdown is necessary if mhi_sync_power_up fails due to a timeout, to clean up the resources. Otherwise a BUG could be triggered when attempting to clean up MSIs because the IRQ is still active from a request_irq(). Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28bus: Add driver for Integrator/AP logic modulesLinus Walleij3-1/+138
The logic modules on the Integrator/AP (Application Platform) are logic tiles with (typically) one or a few peripheral devices. They are most commonly used for FPGA prototyping. Using the device tree node for logic tiles, we probe them in order and check if the special system controller register confirm their presence before populating the node for a tile. This supercedes the code in arch/arm/mach-integrator/lm.[c|h] and makes it possible to populate the tiles using the device tree instead of boardfile-based descriptions. Tested with all peripherals including graphics and MMC card working fine with the IM-PD1 example tile from Arm. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-28bus: mhi: core: Fix a NULL vs IS_ERR check in mhi_create_devices()Dan Carpenter1-1/+1
The mhi_alloc_device() function never returns NULL, it returns error pointers. Fixes: da1c4f856924 ("bus: mhi: core: Add support for creating and destroying MHI devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200407093133.GM68494@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28bus: mhi: core: Add support for MHI suspend and resumeManivannan Sadhasivam2-1/+145
Add support for MHI suspend and resume states. While at it, the mhi_notify() function needs to be exported as well. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200427075829.9304-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-04Merge tag 'arm-drivers-5.7' of ↵Linus Torvalds2-91/+540
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "These are the usual updates for SoC specific device drivers and related subsystems that don't have their own top-level maintainers: - ARM SCMI/SCPI updates to allow pluggable transport layers - TEE subsystem cleanups - A new driver for the Amlogic secure power domain controller - Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and TI OMAP2+ sysc drivers. - Qualcomm SoC driver updates, including a new library module for "protection domain" notifications - Lots of smaller bugfixes and cleanups in other drivers" * tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits) soc: fsl: qe: fix sparse warnings for ucc_slow.c soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure soc: fsl: qe: fix sparse warnings for ucc_fast.c soc: fsl: qe: fix sparse warnings for qe_ic.c soc: fsl: qe: fix sparse warnings for ucc.c soc: fsl: qe: fix sparse warning for qe_common.c soc: fsl: qe: fix sparse warnings for qe.c soc: qcom: Fix QCOM_APR dependencies soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb soc: imx: drop COMPILE_TEST for IMX_SCU_SOC firmware: imx: add COMPILE_TEST for IMX_SCU driver soc: imx: gpc: fix power up sequencing soc: imx: increase build coverage for imx8m soc driver soc: qcom: apr: Add avs/audio tracking functionality dt-bindings: soc: qcom: apr: Add protection domain bindings soc: qcom: Introduce Protection Domain Restart helpers devicetree: bindings: firmware: add ipq806x to qcom_scm memory: tegra: Correct debugfs clk rate-range on Tegra124 memory: tegra: Correct debugfs clk rate-range on Tegra30 memory: tegra: Correct debugfs clk rate-range on Tegra20 ...
2020-04-03Merge tag 'char-misc-5.7-rc1' of ↵Linus Torvalds10-0/+5008
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ...
2020-04-02Merge branch 'linus' of ↵Linus Torvalds1-16/+17
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Fix out-of-sync IVs in self-test for IPsec AEAD algorithms Algorithms: - Use formally verified implementation of x86/curve25519 Drivers: - Enhance hwrng support in caam - Use crypto_engine for skcipher/aead/rsa/hash in caam - Add Xilinx AES driver - Add uacce driver - Register zip engine to uacce in hisilicon - Add support for OCTEON TX CPT engine in marvell" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) crypto: af_alg - bool type cosmetics crypto: arm[64]/poly1305 - add artifact to .gitignore files crypto: caam - limit single JD RNG output to maximum of 16 bytes crypto: caam - enable prediction resistance in HRWNG bus: fsl-mc: add api to retrieve mc version crypto: caam - invalidate entropy register during RNG initialization crypto: caam - check if RNG job failed crypto: caam - simplify RNG implementation crypto: caam - drop global context pointer and init_done crypto: caam - use struct hwrng's .init for initialization crypto: caam - allocate RNG instantiation descriptor with GFP_DMA crypto: ccree - remove duplicated include from cc_aead.c crypto: chelsio - remove set but not used variable 'adap' crypto: marvell - enable OcteonTX cpt options for build crypto: marvell - add the Virtual Function driver for CPT crypto: marvell - add support for OCTEON TX CPT engine crypto: marvell - create common Kconfig and Makefile for Marvell crypto: arm/neon - memzero_explicit aes-cbc key crypto: bcm - Use scnprintf() for avoiding potential buffer overflow crypto: atmel-i2c - Fix wakeup fail ...
2020-03-30bus: fsl-mc: add api to retrieve mc versionAndrei Botila1-16/+17
Add a new api that returns Management Complex firmware version and make the required structure public. The api's first user will be the caam driver for setting prediction resistance bits. Signed-off-by: Andrei Botila <andrei.botila@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Horia Geantă <horia.geanta@nxp.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Iuliana Prodan <iuliana.prodan@nxp.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-imx@nxp.com Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-26bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()Manivannan Sadhasivam2-0/+25
For some scenarios like controller suspend and resume, mhi_destroy_device() will get called without mhi_unregister_controller(). In that case, the references to the mhi_dev created for the channels will not be dropped but the channels will be destroyed as per the spec. This will cause issue during resume as the channels will not be created due to the fact that mhi_dev is not NULL. Hence, this change decrements the refcount for mhi_dev in mhi_destroy_device() for concerned channels and also sets mhi_dev to NULL in release_device(). Reported-by: Carl Huang <cjhuang@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200324061050.14845-5-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 21:35:58 +0300