summaryrefslogtreecommitdiff
path: root/drivers/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2026-01-08Bluetooth: btusb: revert use of devm_kzalloc in btusbRaphael Pinsonneault-Thibeault1-3/+9
[ Upstream commit 252714f1e8bdd542025b16321c790458014d6880 ] This reverts commit 98921dbd00c4e ("Bluetooth: Use devm_kzalloc in btusb.c file"). In btusb_probe(), we use devm_kzalloc() to allocate the btusb data. This ties the lifetime of all the btusb data to the binding of a driver to one interface, INTF. In a driver that binds to other interfaces, ISOC and DIAG, this is an accident waiting to happen. The issue is revealed in btusb_disconnect(), where calling usb_driver_release_interface(&btusb_driver, data->intf) will have devm free the data that is also being used by the other interfaces of the driver that may not be released yet. To fix this, revert the use of devm and go back to freeing memory explicitly. Fixes: 98921dbd00c4e ("Bluetooth: Use devm_kzalloc in btusb.c file") Signed-off-by: Raphael Pinsonneault-Thibeault <rpthibeault@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-08Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VTMax Chou1-0/+2
[ Upstream commit 32caa197b9b603e20f49fd3a0dffecd0cd620499 ] Add the support ID(0x0489, 0xE12F) to usb_device_id table for Realtek RTL8852BE-VT. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=04 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 86 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e12f Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-08Bluetooth: btusb: Add new VID/PID 13d3/3533 for RTL8821CEGongwei Li1-0/+2
[ Upstream commit 525459da4bd62a81142fea3f3d52188ceb4d8907 ] Add VID 13d3 & PID 3533 for Realtek RTL8821CE USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3533 Rev= 1.10 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Gongwei Li <ligongwei@kylinos.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-08Bluetooth: btusb: MT7920: Add VID/PID 0489/e135Chris Lu1-0/+2
[ Upstream commit c126f98c011f5796ba118ef2093122d02809d30d ] Add VID 0489 & PID e135 for MediaTek MT7920 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e135 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us Signed-off-by: Chris Lu <chris.lu@mediatek.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-08Bluetooth: btusb: MT7922: Add VID/PID 0489/e170Chris Lu1-0/+2
[ Upstream commit 5a6700a31c953af9a17a7e2681335f31d922614d ] Add VID 0489 & PID e170 for MediaTek MT7922 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e170 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Chris Lu <chris.lu@mediatek.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-08Bluetooth: btusb: Add new VID/PID 2b89/6275 for RTL8761BUVChingbin Li1-0/+2
[ Upstream commit 8dbbb5423c0802ec21266765de80fd491868fab1 ] Add VID 2b89 & PID 6275 for Realtek RTL8761BUV USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2b89 ProdID=6275 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00E04C239987 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Chingbin Li <liqb365@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-12Bluetooth: btrtl: Avoid loading the config file on security chipsMax Chou1-11/+13
[ Upstream commit cd8dbd9ef600435439bb0e70af0a1d9e2193aecb ] For chips with security enabled, it's only possible to load firmware with a valid signature pattern. If key_id is not zero, it indicates a security chip, and the driver will not load the config file. - Example log for a security chip. Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a lmp_ver=0c lmp_subver=8922 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: btrtl_initialize: key id 1 Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin Bluetooth: hci0: RTL: cfg_sz 0, total sz 71301 Bluetooth: hci0: RTL: fw version 0x41c0c905 - Example log for a normal chip. Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a lmp_ver=0c lmp_subver=8922 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: btrtl_initialize: key id 0 Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_config.bin Bluetooth: hci0: RTL: cfg_sz 6, total sz 71307 Bluetooth: hci0: RTL: fw version 0x41c0c905 Tested-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Nial Ni <niall_ni@realsil.com.cn> Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07Bluetooth: btusb: mediatek: Avoid btusb_mtk_claim_iso_intf() NULL derefDouglas Anderson1-0/+5
commit c884a0b27b4586e607431d86a1aa0bb4fb39169c upstream. In btusb_mtk_setup(), we set `btmtk_data->isopkt_intf` to: usb_ifnum_to_if(data->udev, MTK_ISO_IFNUM) That function can return NULL in some cases. Even when it returns NULL, though, we still go on to call btusb_mtk_claim_iso_intf(). As of commit e9087e828827 ("Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()"), calling btusb_mtk_claim_iso_intf() when `btmtk_data->isopkt_intf` is NULL will cause a crash because we'll end up passing a bad pointer to device_lock(). Prior to that commit we'd pass the NULL pointer directly to usb_driver_claim_interface() which would detect it and return an error, which was handled. Resolve the crash in btusb_mtk_claim_iso_intf() by adding a NULL check at the start of the function. This makes the code handle a NULL `btmtk_data->isopkt_intf` the same way it did before the problematic commit (just with a slight change to the error message printed). Reported-by: IncogCyberpunk <incogcyberpunk@proton.me> Closes: http://lore.kernel.org/r/a380d061-479e-4713-bddd-1d6571ca7e86@leemhuis.info Fixes: e9087e828827 ("Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()") Cc: stable@vger.kernel.org Tested-by: IncogCyberpunk <incogcyberpunk@proton.me> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07Bluetooth: btusb: mediatek: Fix kernel crash when releasing mtk iso interfaceChris Lu1-7/+27
[ Upstream commit 4015b979767125cf8a2233a145a3b3af78bfd8fb ] When performing reset tests and encountering abnormal card drop issues that lead to a kernel crash, it is necessary to perform a null check before releasing resources to avoid attempting to release a null pointer. <4>[ 29.158070] Hardware name: Google Quigon sku196612/196613 board (DT) <4>[ 29.158076] Workqueue: hci0 hci_cmd_sync_work [bluetooth] <4>[ 29.158154] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) <4>[ 29.158162] pc : klist_remove+0x90/0x158 <4>[ 29.158174] lr : klist_remove+0x88/0x158 <4>[ 29.158180] sp : ffffffc0846b3c00 <4>[ 29.158185] pmr_save: 000000e0 <4>[ 29.158188] x29: ffffffc0846b3c30 x28: ffffff80cd31f880 x27: ffffff80c1bdc058 <4>[ 29.158199] x26: dead000000000100 x25: ffffffdbdc624ea3 x24: ffffff80c1bdc4c0 <4>[ 29.158209] x23: ffffffdbdc62a3e6 x22: ffffff80c6c07000 x21: ffffffdbdc829290 <4>[ 29.158219] x20: 0000000000000000 x19: ffffff80cd3e0648 x18: 000000031ec97781 <4>[ 29.158229] x17: ffffff80c1bdc4a8 x16: ffffffdc10576548 x15: ffffff80c1180428 <4>[ 29.158238] x14: 0000000000000000 x13: 000000000000e380 x12: 0000000000000018 <4>[ 29.158248] x11: ffffff80c2a7fd10 x10: 0000000000000000 x9 : 0000000100000000 <4>[ 29.158257] x8 : 0000000000000000 x7 : 7f7f7f7f7f7f7f7f x6 : 2d7223ff6364626d <4>[ 29.158266] x5 : 0000008000000000 x4 : 0000000000000020 x3 : 2e7325006465636e <4>[ 29.158275] x2 : ffffffdc11afeff8 x1 : 0000000000000000 x0 : ffffffdc11be4d0c <4>[ 29.158285] Call trace: <4>[ 29.158290] klist_remove+0x90/0x158 <4>[ 29.158298] device_release_driver_internal+0x20c/0x268 <4>[ 29.158308] device_release_driver+0x1c/0x30 <4>[ 29.158316] usb_driver_release_interface+0x70/0x88 <4>[ 29.158325] btusb_mtk_release_iso_intf+0x68/0xd8 [btusb (HASH:e8b6 5)] <4>[ 29.158347] btusb_mtk_reset+0x5c/0x480 [btusb (HASH:e8b6 5)] <4>[ 29.158361] hci_cmd_sync_work+0x10c/0x188 [bluetooth (HASH:a4fa 6)] <4>[ 29.158430] process_scheduled_works+0x258/0x4e8 <4>[ 29.158441] worker_thread+0x300/0x428 <4>[ 29.158448] kthread+0x108/0x1d0 <4>[ 29.158455] ret_from_fork+0x10/0x20 <0>[ 29.158467] Code: 91343000 940139d1 f9400268 927ff914 (f9401297) <4>[ 29.158474] ---[ end trace 0000000000000000 ]--- <0>[ 29.167129] Kernel panic - not syncing: Oops: Fatal exception <2>[ 29.167144] SMP: stopping secondary CPUs <4>[ 29.167158] ------------[ cut here ]------------ Fixes: ceac1cb0259d ("Bluetooth: btusb: mediatek: add ISO data transmission functions") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24Bluetooth: btusb: reorder cleanup in btusb_disconnect to avoid UAFRaphael Pinsonneault-Thibeault1-7/+6
[ Upstream commit 23d22f2f71768034d6ef86168213843fc49bf550 ] There is a KASAN: slab-use-after-free read in btusb_disconnect(). Calling "usb_driver_release_interface(&btusb_driver, data->intf)" will free the btusb data associated with the interface. The same data is then used later in the function, hence the UAF. Fix by moving the accesses to btusb data to before the data is free'd. Reported-by: syzbot+2fc81b50a4f8263a159b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2fc81b50a4f8263a159b Tested-by: syzbot+2fc81b50a4f8263a159b@syzkaller.appspotmail.com Fixes: fd913ef7ce619 ("Bluetooth: btusb: Add out-of-band wakeup support") Signed-off-by: Raphael Pinsonneault-Thibeault <rpthibeault@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13Bluetooth: btrtl: Fix memory leak in rtlbt_parse_firmware_v2()Abdun Nihaal1-1/+3
[ Upstream commit 1c21cf89a66413eb04b2d22c955b7a50edc14dfa ] The memory allocated for ptr using kvmalloc() is not freed on the last error path. Fix that by freeing it on that error path. Fixes: 9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support") Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13Bluetooth: bcsp: receive data only if registeredIvan Pravdin1-0/+3
[ Upstream commit ca94b2b036c22556c3a66f1b80f490882deef7a6 ] Currently, bcsp_recv() can be called even when the BCSP protocol has not been registered. This leads to a NULL pointer dereference, as shown in the following stack trace: KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590 Call Trace: <TASK> hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627 tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290 tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f To prevent this, ensure that the HCI_UART_REGISTERED flag is set before processing received data. If the protocol is not registered, return -EUNATCH. Reported-by: syzbot+4ed6852d4da4606c93da@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=4ed6852d4da4606c93da Tested-by: syzbot+4ed6852d4da4606c93da@syzkaller.appspotmail.com Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13Bluetooth: btusb: Add new VID/PID 13d3/3633 for MT7922Chris Lu1-0/+2
[ Upstream commit 70cd38d22d4659ca8133c7124528c90678215dda ] Add VID 13d3 & PID 3633 for MediaTek MT7922 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3633 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13Bluetooth: btusb: Check for unexpected bytes when defragmenting HCI framesArkadiusz Bokowy1-0/+17
[ Upstream commit 7722d6fb54e428a8f657fccf422095a8d7e2d72c ] Some Barrot based USB Bluetooth dongles erroneously send one extra random byte for the HCI_OP_READ_LOCAL_EXT_FEATURES command. The consequence of that is that the next HCI transfer is misaligned by one byte causing undefined behavior. In most cases the response event for the next command fails with random error code. Since the HCI_OP_READ_LOCAL_EXT_FEATURES command is used during HCI controller initialization, the initialization fails rendering the USB dongle not usable. > [59.464099] usb 1-1.3: new full-speed USB device number 11 using xhci_hcd > [59.561617] usb 1-1.3: New USB device found, idVendor=33fa, idProduct=0012, bcdDevice=88.91 > [59.561642] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 > [59.561656] usb 1-1.3: Product: UGREEN BT6.0 Adapter > [61.720116] Bluetooth: hci1: command 0x1005 tx timeout > [61.720167] Bluetooth: hci1: Opcode 0x1005 failed: -110 This patch was tested with the 33fa:0012 device. The info from the /sys/kernel/debug/usb/devices is shown below: T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 12 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=33fa ProdID=0012 Rev=88.91 S: Product=UGREEN BT6.0 Adapter C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Now the device is initialized properly: > [43.329852] usb 1-1.4: new full-speed USB device number 4 using dwc_otg > [43.446790] usb 1-1.4: New USB device found, idVendor=33fa, idProduct=0012, bcdDevice=88.91 > [43.446813] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 > [43.446821] usb 1-1.4: Product: UGREEN BT6.0 Adapter > [43.582024] Bluetooth: hci1: Unexpected continuation: 1 bytes > [43.703025] Bluetooth: hci1: Unexpected continuation: 1 bytes > [43.750141] Bluetooth: MGMT ver 1.23 Link: https://github.com/bluez/bluez/issues/1326 Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com> Tested-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13Bluetooth: btmtksdio: Add pmctrl handling for BT closed state during resetChris Lu1-0/+12
[ Upstream commit 77343b8b4f87560f8f03e77b98a81ff3a147b262 ] This patch adds logic to handle power management control when the Bluetooth function is closed during the SDIO reset sequence. Specifically, if BT is closed before reset, the driver enables the SDIO function and sets driver pmctrl. After reset, if BT remains closed, the driver sets firmware pmctrl and disables the SDIO function. These changes ensure proper power management and device state consistency across the reset flow. Fixes: 8fafe702253d ("Bluetooth: mt7921s: support bluetooth reset mechanism") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-29Bluetooth: btintel: Add DSBR support for BlazarIW, BlazarU and GaPKiran K2-8/+23
commit d88a8bb8bbbec9d57b84232a2d6f8dab84221959 upstream. Add DSBR support for BlazarIW, BlazarU and Gale Peak2 cores. Refer commit eb9e749c0182 ("Bluetooth: btintel: Allow configuring drive strength of BRI") for details about DSBR. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Salvatore Bonaccorso <carnil@debian.org> Cc: Guido Berhoerster <guido+debian@berhoerster.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-12Bluetooth: btusb: Add USB ID 2001:332a for D-Link AX9U rev. A1Zenm Chen1-0/+2
commit 34ecb8760190606472f71ebf4ca2817928ce5d40 upstream. Add USB ID 2001:332a for D-Link AX9U rev. A1 which is based on a Realtek RTL8851BU chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=332a Rev= 0.00 S: Manufacturer=Realtek S: Product=802.11ax WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtw89_8851bu_git E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org # 6.12.x Signed-off-by: Zenm Chen <zenmchen@gmail.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-09Bluetooth: vhci: Prevent use-after-free by removing debugfs files earlyIvan Pravdin1-16/+41
[ Upstream commit 28010791193a4503f054e8d69a950ef815deb539 ] Move the creation of debugfs files into a dedicated function, and ensure they are explicitly removed during vhci_release(), before associated data structures are freed. Previously, debugfs files such as "force_suspend", "force_wakeup", and others were created under hdev->debugfs but not removed in vhci_release(). Since vhci_release() frees the backing vhci_data structure, any access to these files after release would result in use-after-free errors. Although hdev->debugfs is later freed in hci_release_dev(), user can access files after vhci_data is freed but before hdev->debugfs is released. Fixes: ab4e4380d4e1 ("Bluetooth: Add vhci devcoredump support") Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28Bluetooth: btmtk: Fix wait_on_bit_timeout interruption during shutdownJiande Lu1-6/+1
[ Upstream commit 099799fa9b76c5c02b49e07005a85117a25b01ea ] During the shutdown process, an interrupt occurs that prematurely terminates the wait for the expected event. This change replaces TASK_INTERRUPTIBLE with TASK_UNINTERRUPTIBLE in the wait_on_bit_timeout call to ensure the shutdown process completes as intended without being interrupted by signals. Fixes: d019930b0049 ("Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c") Signed-off-by: Jiande Lu <jiande.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20Bluetooth: btusb: Add new VID/PID 0489/e14e for MT7925En-Wei Wu1-0/+2
[ Upstream commit 942873c8137fe0015ab37f62f159d88079859c5e ] Add VID 0489 & PID e14e for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e14e Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15Bluetooth: btusb: Add USB ID 3625:010b for TP-LINK Archer TX10UB NanoZenm Chen1-0/+4
commit d9da920233ec85af8b9c87154f2721a7dc4623f5 upstream. Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano which is based on a Realtek RTL8851BU chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=3625 ProdID=010b Rev= 0.00 S: Manufacturer=Realtek S: Product=802.11ax WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8851bu E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Zenm Chen <zenmchen@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-24Bluetooth: btusb: QCA: Fix downloading wrong NVM for WCN6855 GF variant ↵Zijun Hu1-34/+44
without board ID [ Upstream commit 43015955795a619f7ca4ae69b9c0ffc994c82818 ] For GF variant of WCN6855 without board ID programmed btusb_generate_qca_nvm_name() will chose wrong NVM 'qca/nvm_usb_00130201.bin' to download. Fix by choosing right NVM 'qca/nvm_usb_00130201_gf.bin'. Also simplify NVM choice logic of btusb_generate_qca_nvm_name(). Fixes: d6cba4e6d0e2 ("Bluetooth: btusb: Add support using different nvm for variant WCN6855 controller") Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24Bluetooth: btintel: Check if controller is ISO capable on ↵Luiz Augusto von Dentz1-1/+1
btintel_classify_pkt_type commit 6ec3185fbc3528f2284c347fb9bd8be6fa672ed4 upstream. Due to what seem to be a bug with variant version returned by some firmwares the code may set hdev->classify_pkt_type with btintel_classify_pkt_type when in fact the controller doesn't even support ISO channels feature but may use the handle range expected from a controllers that does causing the packets to be reclassified as ISO causing several bugs. To fix the above btintel_classify_pkt_type will attempt to check if the controller really supports ISO channels and in case it doesn't don't reclassify even if the handle range is considered to be ISO, this is considered safer than trying to fix the specific controller/firmware version as that could change over time and causing similar problems in the future. Link: https://bugzilla.kernel.org/show_bug.cgi?id=219553 Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2100565 Link: https://github.com/StarLabsLtd/firmware/issues/180 Fixes: f25b7fd36cc3 ("Bluetooth: Add vendor-specific packet classification for ISO data") Cc: stable@vger.kernel.org Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Sean Rhodes <sean@starlabs.systems> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-17driver: bluetooth: hci_qca:fix unable to load the BT driverShuai Zhang1-3/+10
[ Upstream commit db0ff7e15923ffa7067874604ca275e92343f1b1 ] Some modules have BT_EN enabled via a hardware pull-up, meaning it is not defined in the DTS and is not controlled through the power sequence. In such cases, fall through to follow the legacy flow. Signed-off-by: Shuai Zhang <quic_shuaz@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27Bluetooth: btusb: Add new VID/PID 13d3/3630 for MT7925Jiande Lu1-0/+2
[ Upstream commit 5bd5c716f7ec3e25d8d3b8a7566e192a26f9c7ce ] Add VID 13d3 & PID 3630 for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=07 Lev=01 Prnt=01 Port=10 Cnt=02 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3630 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Jiande Lu <jiande.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922Liwei Sun1-0/+2
[ Upstream commit 71d9d3522aec301e4a1c4eae4b5e0656fc4a7262 ] A new variant of MT7922 wireless device has been identified. The device introduces itself as MEDIATEK MT7922, so treat it as MediaTek device. With this patch, btusb driver works as expected: [ 3.151162] Bluetooth: Core ver 2.22 [ 3.151185] Bluetooth: HCI device and connection manager initialized [ 3.151189] Bluetooth: HCI socket layer initialized [ 3.151191] Bluetooth: L2CAP socket layer initialized [ 3.151194] Bluetooth: SCO socket layer initialized [ 3.295718] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512 [ 4.676634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.676637] Bluetooth: BNEP filters: protocol multicast [ 4.676640] Bluetooth: BNEP socket layer initialized [ 5.560453] Bluetooth: hci0: Device setup in 2320660 usecs [ 5.560457] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 5.619197] Bluetooth: hci0: AOSP extensions version v1.00 [ 5.619204] Bluetooth: hci0: AOSP quality report is supported [ 5.619301] Bluetooth: MGMT ver 1.23 [ 6.741247] Bluetooth: RFCOMM TTY layer initialized [ 6.741258] Bluetooth: RFCOMM socket layer initialized [ 6.741261] Bluetooth: RFCOMM ver 1.11 lspci output: 04:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter USB information: T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3584 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Liwei Sun <sunliweis@126.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19Bluetooth: btintel_pcie: Reduce driver buffer posting to prevent race conditionChandrashekar Devegowda1-1/+5
[ Upstream commit bf2ffc4d14db29cab781549912d2dc69127f4d3e ] Modify the driver to post 3 fewer buffers than the maximum rx buffers (64) allowed for the firmware. This change mitigates a hardware issue causing a race condition in the firmware, improving stability and data handling. Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19Bluetooth: btintel_pcie: Increase the tx and rx descriptor countChandrashekar Devegowda2-14/+17
[ Upstream commit 2dd711102ce69ae41f65d09c012441227d4aa983 ] This change addresses latency issues observed in HID use cases where events arrive in bursts. By increasing the Rx descriptor count to 64, the firmware can handle bursty data more effectively, reducing latency and preventing buffer overflows. Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19Bluetooth: btintel_pcie: Fix driver not posting maximum rx buffersKiran K2-4/+2
[ Upstream commit daabd276985055250528da97e9ce6d277d7009c2 ] The driver was posting only 6 rx buffers, despite the maximum rx buffers being defined as 16. Having fewer RX buffers caused firmware exceptions in HID use cases when events arrived in bursts. Exception seen on android 6.12 kernel. E Bluetooth: hci0: Received hw exception interrupt E Bluetooth: hci0: Received gp1 mailbox interrupt D Bluetooth: hci0: 00000000: ff 3e 87 80 03 01 01 01 03 01 0c 0d 02 1c 10 0e D Bluetooth: hci0: 00000010: 01 00 05 14 66 b0 28 b0 c0 b0 28 b0 ac af 28 b0 D Bluetooth: hci0: 00000020: 14 f1 28 b0 00 00 00 00 fa 04 00 00 00 00 40 10 D Bluetooth: hci0: 00000030: 08 00 00 00 7a 7a 7a 7a 47 00 fb a0 10 00 00 00 D Bluetooth: hci0: 00000000: 10 01 0a E Bluetooth: hci0: ---- Dump of debug registers — E Bluetooth: hci0: boot stage: 0xe0fb0047 E Bluetooth: hci0: ipc status: 0x00000004 E Bluetooth: hci0: ipc control: 0x00000000 E Bluetooth: hci0: ipc sleep control: 0x00000000 E Bluetooth: hci0: mbox_1: 0x00badbad E Bluetooth: hci0: mbox_2: 0x0000101c E Bluetooth: hci0: mbox_3: 0x00000008 E Bluetooth: hci0: mbox_4: 0x7a7a7a7a Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19Bluetooth: btintel: Check dsbr size from EFI variableKees Cook1-8/+2
[ Upstream commit 3aa1dc3c9060e335e82e9c182bf3d1db29220b1b ] Since the size of struct btintel_dsbr is already known, we can just start there instead of querying the EFI variable size. If the final result doesn't match what we expect also fail. This fixes a stack buffer overflow when the EFI variable is larger than struct btintel_dsbr. Reported-by: zepta <z3ptaa@gmail.com> Closes: https://lore.kernel.org/all/CAPBS6KoaWV9=dtjTESZiU6KK__OZX0KpDk-=JEH8jCHFLUYv3Q@mail.gmail.com Fixes: eb9e749c0182 ("Bluetooth: btintel: Allow configuring drive strength of BRI") Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-10Bluetooth: hci_qca: move the SoC type check to the right placeBartosz Golaszewski1-7/+7
commit 0fb410c914eb03c7e9d821e26d03bac0a239e5db upstream. Commit 3d05fc82237a ("Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()") accidentally changed the prevous behavior where power control would be disabled without the BT_EN GPIO only on QCA_WCN6750 and QCA_WCN6855 while also getting the error check wrong. We should treat every IS_ERR() return value from devm_gpiod_get_optional() as a reason to bail-out while we should only set power_ctrl_enabled to false on the two models mentioned above. While at it: use dev_err_probe() to save a LOC. Cc: stable@vger.kernel.org Fixes: 3d05fc82237a ("Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Hsin-chen Chuang <chharry@chromium.org> Reviewed-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-29Bluetooth: btmtksdio: Do close if SDIO card removed without closeChris Lu1-2/+6
commit 0b6d58bc6ea85e57de25c828444928e4a0aa79cb upstream. To prevent Bluetooth SDIO card from be physically removed suddenly, driver needs to ensure btmtksdio_close is called before btmtksdio_remove to disable interrupts and txrx workqueue. Fixes: 6ac4233afb9a ("Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-29Bluetooth: btmtksdio: Check function enabled before doing closeChris Lu1-0/+4
commit 07e90048e356a29079fbc011cfc2e1fa1d1c5ac9 upstream. Check BTMTKSDIO_FUNC_ENABLED flag before doing close to prevent btmtksdio_close been called twice. Fixes: 6ac4233afb9a ("Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-29Bluetooth: btusb: use skb_pull to avoid unsafe access in QCA dump handlingEn-Wei Wu1-58/+40
[ Upstream commit 4bcb0c7dc25446b99fc7a8fa2a143d69f3314162 ] Use skb_pull() and skb_pull_data() to safely parse QCA dump packets. This avoids direct pointer math on skb->data, which could lead to invalid access if the packet is shorter than expected. Fixes: 20981ce2d5a5 ("Bluetooth: btusb: Add WCN6855 devcoredump support") Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removalSean Wang1-1/+2
[ Upstream commit 6ac4233afb9a389a7629b7f812395d1d1eca5a83 ] Ensure interrupts are not re-enabled when the IRQ handler has already been removed. This prevents unexpected IRQ handler execution due to stale or unhandled interrupts. Modify btmtksdio_txrx_work to check if bdev->func->irq_handler exists before calling sdio_writel to enable interrupts. Co-developed-by: Pedro Tsai <pedro.tsai@mediatek.com> Signed-off-by: Pedro Tsai <pedro.tsai@mediatek.com> Co-developed-by: Felix Freimann <felix.freimann@mediatek.com> Signed-off-by: Felix Freimann <felix.freimann@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-22Bluetooth: btnxpuart: Fix kernel panic during FW releaseNeeraj Sanjay Kale1-2/+4
commit 1f77c05408c96bc0b58ae476a9cadc9e5b9cfd0f upstream. This fixes a kernel panic seen during release FW in a stress test scenario where WLAN and BT FW download occurs simultaneously, and due to a HW bug, chip sends out only 1 bootloader signatures. When driver receives the bootloader signature, it enters FW download mode, but since no consequtive bootloader signatures seen, FW file is not requested. After 60 seconds, when FW download times out, release_firmware causes a kernel panic. [ 2601.949184] Unable to handle kernel paging request at virtual address 0000312e6f006573 [ 2601.992076] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111802000 [ 2601.992080] [0000312e6f006573] pgd=0000000000000000, p4d=0000000000000000 [ 2601.992087] Internal error: Oops: 0000000096000021 [#1] PREEMPT SMP [ 2601.992091] Modules linked in: algif_hash algif_skcipher af_alg btnxpuart(O) pciexxx(O) mlan(O) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce snd_soc_fsl_easrc snd_soc_fsl_asoc_card imx8_media_dev(C) snd_soc_fsl_micfil polyval_generic snd_soc_fsl_xcvr snd_soc_fsl_sai snd_soc_imx_audmux snd_soc_fsl_asrc snd_soc_imx_card snd_soc_imx_hdmi snd_soc_fsl_aud2htx snd_soc_fsl_utils imx_pcm_dma dw_hdmi_cec flexcan can_dev [ 2602.001825] CPU: 2 PID: 20060 Comm: hciconfig Tainted: G C O 6.6.23-lts-next-06236-gb586a521770e #1 [ 2602.010182] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 2602.010185] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2602.010191] pc : _raw_spin_lock+0x34/0x68 [ 2602.010201] lr : free_fw_priv+0x20/0xfc [ 2602.020561] sp : ffff800089363b30 [ 2602.020563] x29: ffff800089363b30 x28: ffff0000d0eb5880 x27: 0000000000000000 [ 2602.020570] x26: 0000000000000000 x25: ffff0000d728b330 x24: 0000000000000000 [ 2602.020577] x23: ffff0000dc856f38 [ 2602.033797] x22: ffff800089363b70 x21: ffff0000dc856000 [ 2602.033802] x20: ff00312e6f006573 x19: ffff0000d0d9ea80 x18: 0000000000000000 [ 2602.033809] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaad80dd480 [ 2602.083320] x14: 0000000000000000 x13: 00000000000001b9 x12: 0000000000000002 [ 2602.083326] x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff800089363a30 [ 2602.083333] x8 : ffff0001793d75c0 x7 : ffff0000d6dbc400 x6 : 0000000000000000 [ 2602.083339] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : 0000000000000001 [ 2602.083346] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ff00312e6f006573 [ 2602.083354] Call trace: [ 2602.083356] _raw_spin_lock+0x34/0x68 [ 2602.083364] release_firmware+0x48/0x6c [ 2602.083370] nxp_setup+0x3c4/0x540 [btnxpuart] [ 2602.083383] hci_dev_open_sync+0xf0/0xa34 [ 2602.083391] hci_dev_open+0xd8/0x178 [ 2602.083399] hci_sock_ioctl+0x3b0/0x590 [ 2602.083405] sock_do_ioctl+0x60/0x118 [ 2602.083413] sock_ioctl+0x2f4/0x374 [ 2602.091430] __arm64_sys_ioctl+0xac/0xf0 [ 2602.091437] invoke_syscall+0x48/0x110 [ 2602.091445] el0_svc_common.constprop.0+0xc0/0xe0 [ 2602.091452] do_el0_svc+0x1c/0x28 [ 2602.091457] el0_svc+0x40/0xe4 [ 2602.091465] el0t_64_sync_handler+0x120/0x12c [ 2602.091470] el0t_64_sync+0x190/0x194 Fixes: e3c4891098c8 ("Bluetooth: btnxpuart: Handle FW Download Abort scenario") Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Bin Lan <bin.lan.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18Bluetooth: btmtk: Remove the resetting step before downloading the fwHao Qin1-10/+0
commit 33634e2ab7c6369391e0ca4b9b97dc861e33d20e upstream. Remove the resetting step before downloading the fw, as it may cause other usb devices to fail to initialise when connected during boot on kernels 6.11 and newer. Signed-off-by: Hao Qin <hao.qin@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: "Geoffrey D. Bennett" <g@b4.vu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18Bluetooth: btmtk: Remove resetting mt7921 before downloading the fwHao Qin1-2/+2
commit a7208610761ae9b3bc109ddc493eb7c332fca5b2 upstream. Remove resetting mt7921 before downloading the fw, as it may cause command timeout when performing the reset. Signed-off-by: Hao Qin <hao.qin@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: "Geoffrey D. Bennett" <g@b4.vu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-09Bluetooth: btintel_pcie: Add additional to checks to clear TX/RX pathsKiran K1-5/+19
[ Upstream commit 1c7664957e4edb234c69de2db4be1f740d2df564 ] Due to a hardware issue, there is a possibility that the driver may miss an MSIx interrupt on the RX/TX data path. Since the TX and RX paths are independent, when a TX MSIx interrupt occurs, the driver can check the RX queue for any pending data and process it if present. The same approach applies to the RX path. Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport") Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue()En-Wei Wu1-28/+73
[ Upstream commit 0317b033abcd1d8dd2798f0e2de5e84543d0bd22 ] A NULL pointer dereference can occur in skb_dequeue() when processing a QCA firmware crash dump on WCN7851 (0489:e0f3). [ 93.672166] Bluetooth: hci0: ACL memdump size(589824) [ 93.672475] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 93.672517] Workqueue: hci0 hci_devcd_rx [bluetooth] [ 93.672598] RIP: 0010:skb_dequeue+0x50/0x80 The issue stems from handle_dump_pkt_qca() returning 0 even when a dump packet is successfully processed. This is because it incorrectly forwards the return value of hci_devcd_init() (which returns 0 on success). As a result, the caller (btusb_recv_acl_qca() or btusb_recv_evt_qca()) assumes the packet was not handled and passes it to hci_recv_frame(), leading to premature kfree() of the skb. Later, hci_devcd_rx() attempts to dequeue the same skb from the dump queue, resulting in a NULL pointer dereference. Fix this by: 1. Making handle_dump_pkt_qca() return 0 on success and negative errno on failure, consistent with kernel conventions. 2. Splitting dump packet detection into separate functions for ACL and event packets for better structure and readability. This ensures dump packets are properly identified and consumed, avoiding double handling and preventing NULL pointer access. Fixes: 20981ce2d5a5 ("Bluetooth: btusb: Add WCN6855 devcoredump support") Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09Bluetooth: btintel_pcie: Avoid redundant buffer allocationKiran K1-21/+12
[ Upstream commit d1af1f02ef8653dea4573e444136c8331189cd59 ] Reuse the skb buffer provided by the PCIe driver to pass it onto the stack, instead of copying it to a new skb. Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport") Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09Bluetooth: btusb: Add 13 USB device IDs for Qualcomm WCN785xZijun Hu1-0/+26
[ Upstream commit 2dd1c1eee3e496fcc16971be4db5bb792a36025c ] Add 13 USB device IDs for Qualcomm WCN785x, and these IDs are extracted from Windows driver inf file for various types of WoS (Windows on Snapdragon) laptop. Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-09Bluetooth: btusb: Add new VID/PID for WCN785xDorian Cruveiller1-0/+2
[ Upstream commit c7629ccfa175e16bb44a60c469214e1a6051f63d ] Add VID 0489 & PID e10d for Qualcomm WCN785x USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e10d Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Dorian Cruveiller <doriancruveiller@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-09Bluetooth: btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785xMark Dietzer1-0/+2
[ Upstream commit a6587d7ed2cd8341f8a92112ac772f2c44f09824 ] Adds a new entry with VID 0x2c7c and PID 0x0130 to the btusb quirks table as it uses a Qualcomm WCN785x chipset The device information from /sys/kernel/debug/usb/devices is provided below: T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=05 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0130 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Mark Dietzer <git@doridian.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-09Bluetooth: btusb: Add one more ID 0x13d3:0x3623 for Qualcomm WCN785xZijun Hu1-0/+2
[ Upstream commit e69bcffce21c649a23645b20eb527b3d1ce6fc49 ] Add one more part with ID (0x13d3, 0x3623) to usb_device_id table for Qualcomm WCN785x, and its device info from /sys/kernel/debug/usb/devices is shown below: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3623 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-09Bluetooth: btusb: Add one more ID 0x0489:0xe0f3 for Qualcomm WCN785xZijun Hu1-0/+2
[ Upstream commit 45f745dd1ac880ce299c0f92b874cda090ddade6 ] Add one more part with ID (0x0489, 0xe0f3) to usb_device_id table for Qualcomm WCN785x, and its device info from /sys/kernel/debug/usb/devices is shown below: T: Bus=01 Lev=01 Prnt=01 Port=13 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f3 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-09Bluetooth: btusb: add Foxconn 0xe0fc for Qualcomm WCN785xAaron Ma1-0/+2
[ Upstream commit add1b1656f909c41aa0186fe75e7a42e2c0d2188 ] Firmwares are already in upstream. kernel boot log as following: Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00190200.bin Bluetooth: hci0: QCA: patch rome 0x190200 build 0x5656, firmware rome 0x190200 build 0x43fb Bluetooth: hci0: using NVM file: qca/nvm_usb_00190200.bin Paired BT headphone, output is good. T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0fc Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-25Bluetooth: vhci: Avoid needless snprintf() callsKees Cook1-5/+5
commit 875db86e1ec75fe633f1e85ed2f92c731cdbf760 upstream. Avoid double-copying of string literals. Use a "const char *" for each string instead of copying from .rodata into stack and then into the skb. We can go directly from .rodata to the skb. This also works around a Clang bug (that has since been fixed[1]). Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401250927.1poZERd6-lkp@intel.com/ Fixes: ab4e4380d4e1 ("Bluetooth: Add vhci devcoredump support") Link: https://github.com/llvm/llvm-project/commit/ea2e66aa8b6e363b89df66dc44275a0d7ecd70ce [1] Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-25Bluetooth: btrtl: Prevent potential NULL dereferenceDan Carpenter1-0/+2
[ Upstream commit 324dddea321078a6eeb535c2bff5257be74c9799 ] The btrtl_initialize() function checks that rtl_load_file() either had an error or it loaded a zero length file. However, if it loaded a zero length file then the error code is not set correctly. It results in an error pointer vs NULL bug, followed by a NULL pointer dereference. This was detected by Smatch: drivers/bluetooth/btrtl.c:592 btrtl_initialize() warn: passing zero to 'ERR_PTR' Fixes: 26503ad25de8 ("Bluetooth: btrtl: split the device initialization into smaller parts") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20Bluetooth: hci_uart: Fix another race during initializationArseniy Krasnov2-6/+15
commit 5df5dafc171b90d0b8d51547a82657cd5a1986c7 upstream. Do not set 'HCI_UART_PROTO_READY' before call 'hci_uart_register_dev()'. Possible race is when someone calls 'hci_tty_uart_close()' after this bit is set, but 'hci_uart_register_dev()' wasn't done. This leads to access to uninitialized fields. To fix it let's set this bit after device was registered (as before patch c411c62cc133) and to fix previous problem let's add one more bit in addition to 'HCI_UART_PROTO_READY' which allows to perform power up without original bit set (pls see commit c411c62cc133). Crash backtrace from syzbot report: RIP: 0010:skb_queue_empty_lockless include/linux/skbuff.h:1887 [inline] RIP: 0010:skb_queue_purge_reason+0x6d/0x140 net/core/skbuff.c:3936 Call Trace: <TASK> skb_queue_purge include/linux/skbuff.h:3364 [inline] mrvl_close+0x2f/0x90 drivers/bluetooth/hci_mrvl.c:100 hci_uart_tty_close+0xb6/0x120 drivers/bluetooth/hci_ldisc.c:557 tty_ldisc_close drivers/tty/tty_ldisc.c:455 [inline] tty_ldisc_kill+0x66/0xc0 drivers/tty/tty_ldisc.c:613 tty_ldisc_release+0xc9/0x120 drivers/tty/tty_ldisc.c:781 tty_release_struct+0x10/0x80 drivers/tty/tty_io.c:1690 tty_release+0x4ef/0x640 drivers/tty/tty_io.c:1861 __fput+0x86/0x2a0 fs/file_table.c:450 task_work_run+0x82/0xb0 kernel/task_work.c:239 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0xa3/0x1b0 kernel/entry/common.c:218 do_syscall_64+0x9a/0x190 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com Tested-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-bluetooth/d159c57f-8490-4c26-79da-6ad3612c4a14@salutedevices.com/ Fixes: 366ceff495f9 ("Bluetooth: hci_uart: fix race during initialization") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-23 05:06:40 +0300