summaryrefslogtreecommitdiff
path: root/drivers/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2025-05-02Bluetooth: btrtl: Prevent potential NULL dereferenceDan Carpenter1-0/+2
[ Upstream commit 324dddea321078a6eeb535c2bff5257be74c9799 ] The btrtl_initialize() function checks that rtl_load_file() either had an error or it loaded a zero length file. However, if it loaded a zero length file then the error code is not set correctly. It results in an error pointer vs NULL bug, followed by a NULL pointer dereference. This was detected by Smatch: drivers/bluetooth/btrtl.c:592 btrtl_initialize() warn: passing zero to 'ERR_PTR' Fixes: 26503ad25de8 ("Bluetooth: btrtl: split the device initialization into smaller parts") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02Bluetooth: hci_uart: Fix another race during initializationArseniy Krasnov2-6/+15
commit 5df5dafc171b90d0b8d51547a82657cd5a1986c7 upstream. Do not set 'HCI_UART_PROTO_READY' before call 'hci_uart_register_dev()'. Possible race is when someone calls 'hci_tty_uart_close()' after this bit is set, but 'hci_uart_register_dev()' wasn't done. This leads to access to uninitialized fields. To fix it let's set this bit after device was registered (as before patch c411c62cc133) and to fix previous problem let's add one more bit in addition to 'HCI_UART_PROTO_READY' which allows to perform power up without original bit set (pls see commit c411c62cc133). Crash backtrace from syzbot report: RIP: 0010:skb_queue_empty_lockless include/linux/skbuff.h:1887 [inline] RIP: 0010:skb_queue_purge_reason+0x6d/0x140 net/core/skbuff.c:3936 Call Trace: <TASK> skb_queue_purge include/linux/skbuff.h:3364 [inline] mrvl_close+0x2f/0x90 drivers/bluetooth/hci_mrvl.c:100 hci_uart_tty_close+0xb6/0x120 drivers/bluetooth/hci_ldisc.c:557 tty_ldisc_close drivers/tty/tty_ldisc.c:455 [inline] tty_ldisc_kill+0x66/0xc0 drivers/tty/tty_ldisc.c:613 tty_ldisc_release+0xc9/0x120 drivers/tty/tty_ldisc.c:781 tty_release_struct+0x10/0x80 drivers/tty/tty_io.c:1690 tty_release+0x4ef/0x640 drivers/tty/tty_io.c:1861 __fput+0x86/0x2a0 fs/file_table.c:450 task_work_run+0x82/0xb0 kernel/task_work.c:239 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0xa3/0x1b0 kernel/entry/common.c:218 do_syscall_64+0x9a/0x190 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com Tested-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-bluetooth/d159c57f-8490-4c26-79da-6ad3612c4a14@salutedevices.com/ Fixes: 366ceff495f9 ("Bluetooth: hci_uart: fix race during initialization") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02Bluetooth: hci_uart: fix race during initializationArseniy Krasnov1-1/+2
[ Upstream commit 366ceff495f902182d42b6f41525c2474caf3f9a ] 'hci_register_dev()' calls power up function, which is executed by kworker - 'hci_power_on()'. This function does access to bluetooth chip using callbacks from 'hci_ldisc.c', for example 'hci_uart_send_frame()'. Now 'hci_uart_send_frame()' checks 'HCI_UART_PROTO_READY' bit set, and if not - it fails. Problem is that 'HCI_UART_PROTO_READY' is set after 'hci_register_dev()', and there is tiny chance that 'hci_power_on()' will be executed before setting this bit. In that case HCI init logic fails. Patch moves setting of 'HCI_UART_PROTO_READY' before calling function 'hci_uart_register_dev()'. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14Bluetooth: btusb: Add RTL8852BE device 0489:e123 to device tablesHilda Wu1-0/+2
[ Upstream commit 69b84ffce260ff13826dc10aeb3c3e5c2288a552 ] Add the support ID 0489:e123 to usb_device_id table for Realtek RTL8852B chip. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e123 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001Luiz Augusto von Dentz1-4/+9
commit 2c1dda2acc4192d826e84008d963b528e24d12bc upstream. Fake CSR controllers don't seem to handle short-transfer properly which cause command to time out: kernel: usb 1-1: new full-speed USB device number 19 using xhci_hcd kernel: usb 1-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 kernel: usb 1-1: Product: BT DONGLE10 ... Bluetooth: hci1: Opcode 0x1004 failed: -110 kernel: Bluetooth: hci1: command 0x1004 tx timeout According to USB Spec 2.0 Section 5.7.3 Interrupt Transfer Packet Size Constraints a interrupt transfer is considered complete when the size is 0 (ZPL) or < wMaxPacketSize: 'When an interrupt transfer involves more data than can fit in one data payload of the currently established maximum size, all data payloads are required to be maximum-sized except for the last data payload, which will contain the remaining data. An interrupt transfer is complete when the endpoint does one of the following: • Has transferred exactly the amount of data expected • Transfers a packet with a payload size less than wMaxPacketSize or transfers a zero-length packet' Link: https://bugzilla.kernel.org/show_bug.cgi?id=219365 Fixes: 7b05933340f4 ("Bluetooth: btusb: Fix not handling ZPL/short-transfer") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-08Bluetooth: btmrvl: Use IRQF_NO_AUTOEN flag in request_irq()Jinjie Ruan1-2/+1
[ Upstream commit 7b1ab460592ca818e7b52f27cd3ec86af79220d1 ] disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: bb7f4f0bcee6 ("btmrvl: add platform specific wakeup interrupt support") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08Bluetooth: btmrvl_sdio: Refactor irq wakeupAbhishek Pandit-Subedi1-3/+10
[ Upstream commit e660b3510eb4b3c06ce1188a1d305b6f653106fc ] Use device_init_wakeup to allow the Bluetooth dev to wake the system from suspend. Currently, the device can wake the system but no power/wakeup entry is created in sysfs to allow userspace to disable wakeup. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Stable-dep-of: 7b1ab460592c ("Bluetooth: btmrvl: Use IRQF_NO_AUTOEN flag in request_irq()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08Bluetooth: btusb: Fix not handling ZPL/short-transferLuiz Augusto von Dentz1-1/+4
[ Upstream commit 7b05933340f4490ef5b09e84d644d12484b05fdf ] Requesting transfers of the exact same size of wMaxPacketSize may result in ZPL/short-transfer since the USB stack cannot handle it as we are limiting the buffer size to be the same as wMaxPacketSize. Also, in terms of throughput this change has the same effect to interrupt endpoint as 290ba200815f "Bluetooth: Improve USB driver throughput by increasing the frame size" had for the bulk endpoint, so users of the advertisement bearer (e.g. BT Mesh) may benefit from this change. Fixes: 5e23b923da03 ("[Bluetooth] Add generic driver for Bluetooth USB devices") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Kiran K <kiran.k@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04Bluetooth: hci_ldisc: check HCI_UART_PROTO_READY flag in HCIUARTGETPROTOLee, Chun-Yi1-1/+2
commit 9c33663af9ad115f90c076a1828129a3fbadea98 upstream. This patch adds code to check HCI_UART_PROTO_READY flag before accessing hci_uart->proto. It fixes the race condition in hci_uart_tty_ioctl() between HCIUARTSETPROTO and HCIUARTGETPROTO. This issue bug found by Yu Hao and Weiteng Chen: BUG: general protection fault in hci_uart_tty_ioctl [1] The information of C reproducer can also reference the link [2] Reported-by: Yu Hao <yhao016@ucr.edu> Closes: https://lore.kernel.org/all/CA+UBctC3p49aTgzbVgkSZ2+TQcqq4fPDO7yZitFT5uBPDeCO2g@mail.gmail.com/ [1] Reported-by: Weiteng Chen <wchen130@ucr.edu> Closes: https://lore.kernel.org/lkml/CA+UBctDPEvHdkHMwD340=n02rh+jNRJNNQ5LBZNA+Wm4Keh2ow@mail.gmail.com/T/ [2] Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-19Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591WangYuli1-0/+2
commit 473a89b4ed7fd52a419340f7c540d5c8fc96fc75 upstream. Add the support ID(0x13d3, 0x3591) to usb_device_id table for Realtek RTL8852BE. The device table is as follows: T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3591 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Cc: stable@vger.kernel.org Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Erpeng Xu <xuerpeng@uniontech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-19Bluetooth: btusb: Add RTL8852BE device 0489:e125 to device tablesHilda Wu1-0/+2
commit 295ef07a9dae6182ad4b689aa8c6a7dbba21474c upstream. Add the support ID 0489:e125 to usb_device_id table for Realtek RTL8852B chip. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e125 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Erpeng Xu <xuerpeng@uniontech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-05Bluetooth: ath3k: Fix multiple issues reported by checkpatch.plUri Arev1-14/+11
[ Upstream commit 68aa21054ec3a1a313af90a5f95ade16c3326d20 ] This fixes some CHECKs reported by the checkpatch script. Issues reported in ath3k.c: ------- ath3k.c ------- CHECK: Please don't use multiple blank lines + + CHECK: Blank lines aren't necessary after an open brace '{' +static const struct usb_device_id ath3k_blist_tbl[] = { + CHECK: Alignment should match open parenthesis +static int ath3k_load_firmware(struct usb_device *udev, + const struct firmware *firmware) CHECK: Alignment should match open parenthesis + err = usb_bulk_msg(udev, pipe, send_buf, size, + &len, 3000); CHECK: Unnecessary parentheses around 'len != size' + if (err || (len != size)) { CHECK: Alignment should match open parenthesis +static int ath3k_get_version(struct usb_device *udev, + struct ath3k_version *version) CHECK: Alignment should match open parenthesis +static int ath3k_load_fwfile(struct usb_device *udev, + const struct firmware *firmware) CHECK: Alignment should match open parenthesis + err = usb_bulk_msg(udev, pipe, send_buf, size, + &len, 3000); CHECK: Unnecessary parentheses around 'len != size' + if (err || (len != size)) { CHECK: Blank lines aren't necessary after an open brace '{' + switch (fw_version.ref_clock) { + CHECK: Alignment should match open parenthesis + snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s", + le32_to_cpu(fw_version.rom_version), clk_value, ".dfu"); CHECK: Alignment should match open parenthesis +static int ath3k_probe(struct usb_interface *intf, + const struct usb_device_id *id) CHECK: Alignment should match open parenthesis + BT_ERR("Firmware file \"%s\" not found", + ATH3K_FIRMWARE); CHECK: Alignment should match open parenthesis + BT_ERR("Firmware file \"%s\" request failed (err=%d)", + ATH3K_FIRMWARE, ret); total: 0 errors, 0 warnings, 14 checks, 540 lines checked Signed-off-by: Uri Arev <me@wantyapps.xyz> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853WangYuli1-0/+2
commit d1a5a7eede2977da3d2002d5ea3b519019cc1a98 upstream. Add the support ID(0x0bda, 0x4853) to usb_device_id table for Realtek RTL8852BE. Without this change the device utilizes an obsolete version of the firmware that is encoded in it rather than the updated Realtek firmware and config files from the firmware directory. The latter files implement many new features. The device table is as follows: T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=4853 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Cc: stable@vger.kernel.org Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: WangYuli <wangyuli@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-13Bluetooth: btintel: Fixe build regressionLuiz Augusto von Dentz1-2/+2
commit 6e62ebfb49eb65bdcbfc5797db55e0ce7f79c3dd upstream. This fixes the following build regression: drivers-bluetooth-btintel.c-btintel_read_version()-warn: passing-zero-to-PTR_ERR Fixes: b79e04091010 ("Bluetooth: btintel: Fix null ptr deref in btintel_read_version") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-13Bluetooth: btintel: Fix null ptr deref in btintel_read_versionEdward Adam Davis1-1/+1
[ Upstream commit b79e040910101b020931ba0c9a6b77e81ab7f645 ] If hci_cmd_sync_complete() is triggered and skb is NULL, then hdev->req_skb is NULL, which will cause this issue. Reported-and-tested-by: syzbot+830d9e3fa61968246abd@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26Bluetooth: btmtkuart: fix recv_buf() return valueFrancesco Dolcini1-8/+3
[ Upstream commit 64057f051f20c2a2184b9db7f8037d928d68a4f4 ] Serdev recv_buf() callback is supposed to return the amount of bytes consumed, therefore an int in between 0 and count. Do not return negative number in case of issue, just print an error and return count. This fixes a WARN in ttyport_receive_buf(). Link: https://lore.kernel.org/all/087be419-ec6b-47ad-851a-5e1e3ea5cfcc@kernel.org/ Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BEGuan Wentao1-0/+2
[ Upstream commit da06ff1f585ea784c79f80e7fab0e0c4ebb49c1c ] Add PID/VID 0bda:b85b for Realtek RTL8852BE USB bluetooth part. The PID/VID was reported by the patch last year. [1] Some SBCs like rockpi 5B A8 module contains the device. And it`s founded in website. [2] [3] Here is the device tables in /sys/kernel/debug/usb/devices . T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b85b Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Link: https://lore.kernel.org/all/20220420052402.19049-1-tangmeng@uniontech.com/ [1] Link: https://forum.radxa.com/t/bluetooth-on-ubuntu/13051/4 [2] Link: https://ubuntuforums.org/showthread.php?t=2489527 [3] Cc: stable@vger.kernel.org Signed-off-by: Meng Tang <tangmeng@uniontech.com> Signed-off-by: Guan Wentao <guanwentao@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28Bluetooth: btusb: Add RTW8852BE device 13d3:3570 to device tablesMasum Reza1-0/+2
[ Upstream commit 02be109d3a405dbc4d53fb4b4473d7a113548088 ] This device is used in TP-Link TX20E WiFi+Bluetooth adapter. Relevant information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3570 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Masum Reza <masumrezarock100@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: da06ff1f585e ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28bluetooth: Add device 13d3:3571 to device tablesLarry Finger1-0/+2
[ Upstream commit 069f534247bb6db4f8c2c2ea8e9155abf495c37e ] This device is part of a Realtek RTW8852BE chip. The device table is as follows: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3571 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: da06ff1f585e ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28bluetooth: Add device 0bda:887b to device tablesLarry Finger1-0/+2
[ Upstream commit 730a1d1a93a3e30c3723f87af97a8517334b2203 ] This device is part of a Realtek RTW8852BE chip. The device table entry is as follows: T: Bus=03 Lev=01 Prnt=01 Port=12 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=887b Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: da06ff1f585e ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0cb8:0xc559Artem Lukyanov1-0/+4
[ Upstream commit 393b4916b7b5b94faf5c6a7c68df1c62d17e4f38 ] Add the support ID(0x0cb8, 0xc559) to usb_device_id table for Realtek RTL8852BE. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cb8 ProdID=c559 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Artem Lukyanov <dukzcry@ya.ru> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: da06ff1f585e ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28Bluetooth: btusb: add Realtek 8822CE to usb_device_id tableJoseph Hwang1-0/+4
[ Upstream commit 33bfd94a05abb5a63e323dd1454bc580d4bf992c ] This patch adds the Realtek 8822CE controller to the usb_device_id table to support the wideband speech capability. Signed-off-by: Joseph Hwang <josephsih@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Stable-dep-of: da06ff1f585e ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28Bluetooth: btusb: Add flag to define wideband speech capabilityAlain Michaud1-6/+13
[ Upstream commit 3e4e3f73b9f4944ebd8100dbe107f2325aa79c6d ] This change adds a new flag to define a controller's wideband speech capability. This is required since no reliable over HCI mechanism exists to query the controller and driver's compatibility with wideband speech. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Stable-dep-of: da06ff1f585e ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25Bluetooth: vhci: Fix race when opening vhci deviceArkadiusz Bokowy1-0/+3
commit 92d4abd66f7080075793970fc8f241239e58a9e7 upstream. When the vhci device is opened in the two-step way, i.e.: open device then write a vendor packet with requested controller type, the device shall respond with a vendor packet which includes HCI index of created interface. When the virtual HCI is created, the host sends a reset request to the controller. This request is processed by the vhci_send_frame() function. However, this request is send by a different thread, so it might happen that this HCI request will be received before the vendor response is queued in the read queue. This results in the HCI vendor response and HCI reset request inversion in the read queue which leads to improper behavior of btvirt: > dmesg [1754256.640122] Bluetooth: MGMT ver 1.22 [1754263.023806] Bluetooth: MGMT ver 1.22 [1754265.043775] Bluetooth: hci1: Opcode 0x c03 failed: -110 In order to synchronize vhci two-step open/setup process with virtual HCI initialization, this patch adds internal lock when queuing data in the vhci_send_frame() function. Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-23Bluetooth: nokia: fix value check in nokia_bluetooth_serdev_probe()Yuanjun Gong1-1/+5
[ Upstream commit e8b5aed31355072faac8092ead4938ddec3111fd ] in nokia_bluetooth_serdev_probe(), check the return value of clk_prepare_enable() and return the error code if clk_prepare_enable() returns an unexpected value. Fixes: 7bb318680e86 ("Bluetooth: add nokia driver") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race conditionZheng Wang1-0/+1
commit 73f7b171b7c09139eb3c6a5677c200dc1be5f318 upstream. In btsdio_probe, the data->work is bound with btsdio_work. It will be started in btsdio_send_frame. If the btsdio_remove runs with a unfinished work, there may be a race condition that hdev is freed but used in btsdio_work. Fix it by canceling the work before do cleanup in btsdio_remove. Fixes: CVE-2023-1989 Fixes: ddbaf13e3609 ("[Bluetooth] Add generic driver for Bluetooth SDIO devices") Cc: stable@vger.kernel.org Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> [ Denis: Added CVE-2023-1989 and fixes tags. ] Signed-off-by: Denis Efremov (Oracle) <efremov@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-17Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to ↵Liu Jian1-1/+0
unfinished work" [ Upstream commit db2bf510bd5d57f064d9e1db395ed86a08320c54 ] This reverts commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f. This patch introduces a possible null-ptr-def problem. Revert it. And the fixed bug by this patch have resolved by commit 73f7b171b7c0 ("Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition"). Fixes: 1e9ac114c442 ("Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished ↵Zheng Wang1-0/+1
work [ Upstream commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f ] In btsdio_probe, &data->work was bound with btsdio_work.In btsdio_send_frame, it was started by schedule_work. If we call btsdio_remove with an unfinished job, there may be a race condition and cause UAF bug on hdev. Fixes: ddbaf13e3609 ("[Bluetooth] Add generic driver for Bluetooth SDIO devices") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05Bluetooth: btqcomsmd: Fix command timeout after setting BD addressStephan Gerhold1-1/+16
[ Upstream commit 5d44ab9e204200a78ad55cdf185aa2bb109b5950 ] On most devices using the btqcomsmd driver (e.g. the DragonBoard 410c and other devices based on the Qualcomm MSM8916/MSM8909/... SoCs) the Bluetooth firmware seems to become unresponsive for a while after setting the BD address. On recent kernel versions (at least 5.17+) this often causes timeouts for subsequent commands, e.g. the HCI reset sent by the Bluetooth core during initialization: Bluetooth: hci0: Opcode 0x c03 failed: -110 Unfortunately this behavior does not seem to be documented anywhere. Experimentation suggests that the minimum necessary delay to avoid the problem is ~150us. However, to be sure add a sleep for > 1ms in case it is a bit longer on other firmware versions. Older kernel versions are likely also affected, although perhaps with slightly different errors or less probability. Side effects can easily hide the issue in most cases, e.g. unrelated incoming interrupts that cause the necessary delay. Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang1-1/+1
[ Upstream commit 7b503e339c1a80bf0051ec2d19c3bc777014ac61 ] It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang1-1/+1
[ Upstream commit 383630cc6758d619874c2e8bb2f68a61f3f9ef6e ] It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 43eb12d78960 ("Bluetooth: Fix/implement Three-wire reliable packet sending") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang1-1/+1
[ Upstream commit 8f458f783dfbb19c1f1cb58ed06eeb701f52091b ] It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 166d2f6a4332 ("[Bluetooth] Add UART driver for Texas Instruments' BRF63xx chips") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang1-1/+1
[ Upstream commit df4cfc91208e0a98f078223793f5871b1a82cc54 ] It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 0ff252c1976d ("Bluetooth: hciuart: Add support QCA chipset for UART") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang1-3/+3
[ Upstream commit b15a6bd3c80c77faec8317319b97f976b1a08332 ] It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 803b58367ffb ("Bluetooth: btusb: Implement driver internal packet reassembly") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25Bluetooth: hci_intel: Add check for platform_driver_registerJiasheng Jiang1-1/+5
[ Upstream commit ab2d2a982ff721f4b029282d9a40602ea46a745e ] As platform_driver_register() could fail, it should be better to deal with the return value in order to maintain the code consisitency. Fixes: 1ab1f239bf17 ("Bluetooth: hci_intel: Add support for platform driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interruptYake Yang1-2/+2
[ Upstream commit b062a0b9c1dc1ff63094337dccfe1568d5b62023 ] Fix the following kernel oops in btmtksdio_interrrupt [ 14.339134] btmtksdio_interrupt+0x28/0x54 [ 14.339139] process_sdio_pending_irqs+0x68/0x1a0 [ 14.339144] sdio_irq_work+0x40/0x70 [ 14.339154] process_one_work+0x184/0x39c [ 14.339160] worker_thread+0x228/0x3e8 [ 14.339168] kthread+0x148/0x3ac [ 14.339176] ret_from_fork+0x10/0x30 That happened because hdev->power_on is already called before sdio_set_drvdata which btmtksdio_interrupt handler relies on is not properly set up. The details are shown as the below: hci_register_dev would run queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI workqueue_struct to complete the power-on sequeunce and thus hci_power_on may run before sdio_set_drvdata is done in btmtksdio_probe. The hci_dev_do_open in hci_power_on would initialize the device and enable the interrupt and thus it is possible that btmtksdio_interrupt is being called right before sdio_set_drvdata is filled out. When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled , the kernel oops is going to happen because btmtksdio_interrupt access an uninitialized pointer. Fixes: 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices") Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15Bluetooth: hci_serdev: call init_rwsem() before p->open()Pavel Skripkin1-1/+2
[ Upstream commit 9d7cbe2b9cf5f650067df4f402fdd799d4bbb4e1 ] kvartet reported, that hci_uart_tx_wakeup() uses uninitialized rwsem. The problem was in wrong place for percpu_init_rwsem() call. hci_uart_proto::open() may register a timer whose callback may call hci_uart_tx_wakeup(). There is a chance, that hci_uart_register_device() thread won't be fast enough to call percpu_init_rwsem(). Fix it my moving percpu_init_rwsem() call before p->open(). INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 2 PID: 18524 Comm: syz-executor.5 Not tainted 5.16.0-rc6 #9 ... Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 assign_lock_key kernel/locking/lockdep.c:951 [inline] register_lock_class+0x148d/0x1950 kernel/locking/lockdep.c:1263 __lock_acquire+0x106/0x57e0 kernel/locking/lockdep.c:4906 lock_acquire kernel/locking/lockdep.c:5637 [inline] lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5602 percpu_down_read_trylock include/linux/percpu-rwsem.h:92 [inline] hci_uart_tx_wakeup+0x12e/0x490 drivers/bluetooth/hci_ldisc.c:124 h5_timed_event+0x32f/0x6a0 drivers/bluetooth/hci_h5.c:188 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421 Fixes: d73e17281665 ("Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops") Reported-by: Yiru Xu <xyru1999@gmail.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27Bluetooth: hci_bcm: Check for error irqJiasheng Jiang1-1/+6
[ Upstream commit b38cd3b42fba66cc538edb9cf77e07881f43f8e2 ] For the possible failure of the platform_get_irq(), the returned irq could be error number and will finally cause the failure of the request_irq(). Consider that platform_get_irq() can now in certain cases return -EPROBE_DEFER, and the consequences of letting request_irq() effectively convert that into -EINVAL, even at probe time rather than later on. So it might be better to check just now. Fixes: 0395ffc1ee05 ("Bluetooth: hci_bcm: Add PM for BCM devices") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27Bluetooth: btmtksdio: fix resume failureSean Wang1-0/+2
[ Upstream commit 561ae1d46a8ddcbc13162d5771f5ed6c8249e730 ] btmtksdio have to rely on MMC_PM_KEEP_POWER in pm_flags to avoid that SDIO power is being shut off during the device is in suspend. That fixes the SDIO command fails to access the bus after the device is resumed. Fixes: 7f3c563c575e7 ("Bluetooth: btmtksdio: Add runtime PM support to SDIO based Bluetooth") Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-16Bluetooth: bfusb: fix division by zero in send pathJohan Hovold1-0/+3
commit b5e6fa7a12572c82f1e7f2f51fbb02a322291291 upstream. Add the missing bulk-out endpoint sanity check to probe() to avoid division by zero in bfusb_send_frame() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-16Bluetooth: btusb: fix memory leak in btusb_mtk_submit_wmt_recv_urb()Mark-YW.Chen1-0/+5
commit 60c6a63a3d3080a62f3e0e20084f58dbeff16748 upstream. Driver should free `usb->setup_packet` to avoid the leak. $ cat /sys/kernel/debug/kmemleak unreferenced object 0xffffffa564a58080 (size 128): backtrace: [<000000007eb8dd70>] kmem_cache_alloc_trace+0x22c/0x384 [<000000008a44191d>] btusb_mtk_hci_wmt_sync+0x1ec/0x994 [btusb] [<00000000ca7189a3>] btusb_mtk_setup+0x6b8/0x13cc [btusb] [<00000000c6105069>] hci_dev_do_open+0x290/0x974 [bluetooth] [<00000000a583f8b8>] hci_power_on+0xdc/0x3cc [bluetooth] [<000000005d80e687>] process_one_work+0x514/0xc80 [<00000000f4d57637>] worker_thread+0x818/0xd0c [<00000000dc7bdb55>] kthread+0x2f8/0x3b8 [<00000000f9999513>] ret_from_fork+0x10/0x30 Fixes: a1c49c434e150 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices") Signed-off-by: Mark-YW.Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17Bluetooth: btmtkuart: fix a memleak in mtk_hci_wmt_syncDinghao Liu1-5/+8
[ Upstream commit 3e5f2d90c28f9454e421108554707620bc23269d ] bdev->evt_skb will get freed in the normal path and one error path of mtk_hci_wmt_sync, while the other error paths do not free it, which may cause a memleak. This bug is suggested by a static analysis tool, please advise. Fixes: e0b67035a90b ("Bluetooth: mediatek: update the common setup between MT7622 and other devices") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc.Tim Jiang1-0/+5
[ Upstream commit 4f00bfb372674d586c4a261bfc595cbce101fbb6 ] This is btsoc timing issue, after host start to downloading bt firmware, ep2 need time to switch from function acl to function dfu, so host add 20ms delay as workaround. Signed-off-by: Tim Jiang <tjiang@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19Bluetooth: btusb: Fixed too many in-token issue for Mediatek Chip.mark-yw.chen1-5/+5
[ Upstream commit 8454ed9ff9647e31e061fb5eb2e39ce79bc5e960 ] This patch reduce in-token during download patch procedure. Don't submit urb for polling event before sending hci command. Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07Bluetooth: hci_h5: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for btrtlClaire Chang1-0/+5
[ Upstream commit 7f9f2c3f7d99b8ae773459c74ac5e99a0dd46db9 ] Realtek Bluetooth controllers can do both LE scan and BR/EDR inquiry at once, need to set HCI_QUIRK_SIMULTANEOUS_DISCOVERY quirk. Signed-off-by: Claire Chang <tientzu@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04Bluetooth: btusb: Fix memory leak in btusb_mtk_wmt_recvJupeng Zhong1-10/+10
[ Upstream commit de71a6cb4bf24d8993b9ca90d1ddb131b60251a1 ] In btusb_mtk_wmt_recv if skb_clone fails, the alocated skb should be released. Omit the labels “err_out” and “err_free_skb” in this function implementation so that the desired exception handling code would be directly specified in the affected if branches. Fixes: a1c49c434e15 ("btusb: Add protocol support for MediaTek MT7668U USB devices") Signed-off-by: Jupeng Zhong <zhongjupeng@yulong.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04Bluetooth: hci_uart: Fix a race for write_work schedulingClaire Chang2-6/+5
[ Upstream commit afe0b1c86458f121b085271e4f3034017a90d4a3 ] In hci_uart_write_work, there is a loop/goto checking the value of HCI_UART_TX_WAKEUP. If HCI_UART_TX_WAKEUP is set again, it keeps trying hci_uart_dequeue; otherwise, it clears HCI_UART_SENDING and returns. In hci_uart_tx_wakeup, if HCI_UART_SENDING is already set, it sets HCI_UART_TX_WAKEUP, skips schedule_work and assumes the running/pending hci_uart_write_work worker will do hci_uart_dequeue properly. However, if the HCI_UART_SENDING check in hci_uart_tx_wakeup is done after the loop breaks, but before HCI_UART_SENDING is cleared in hci_uart_write_work, the schedule_work is skipped incorrectly. Fix this race by changing the order of HCI_UART_SENDING and HCI_UART_TX_WAKEUP modification. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: 82f5169bf3d3 ("Bluetooth: hci_uart: add serdev driver support library") Signed-off-by: Claire Chang <tientzu@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04Bluetooth: btqcomsmd: Fix a resource leak in error handling paths in the ↵Christophe JAILLET1-8/+19
probe function [ Upstream commit 9a39a927be01d89e53f04304ab99a8761e08910d ] Some resource should be released in the error handling path of the probe function, as already done in the remove function. The remove function was fixed in commit 5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg") Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-12Bluetooth: revert: hci_h5: close serdev device and free hu in h5_closeHans de Goede1-6/+2
commit 5c3b5796866f85354a5ce76a28f8ffba0dcefc7e upstream. There have been multiple revisions of the patch fix the h5->rx_skb leak. Accidentally the first revision (which is buggy) and v5 have both been merged: v1 commit 70f259a3f427 ("Bluetooth: hci_h5: close serdev device and free hu in h5_close"); v5 commit 855af2d74c87 ("Bluetooth: hci_h5: fix memory leak in h5_close") The correct v5 makes changes slightly higher up in the h5_close() function, which allowed both versions to get merged without conflict. The changes from v1 unconditionally frees the h5 data struct, this is wrong because in the serdev enumeration case the memory is allocated in h5_serdev_probe() like this: h5 = devm_kzalloc(dev, sizeof(*h5), GFP_KERNEL); So its lifetime is tied to the lifetime of the driver being bound to the serdev and it is automatically freed when the driver gets unbound. In the serdev case the same h5 struct is re-used over h5_close() and h5_open() calls and thus MUST not be free-ed in h5_close(). The serdev_device_close() added to h5_close() is incorrect in the same way, serdev_device_close() is called on driver unbound too and also MUST no be called from h5_close(). This reverts the changes made by merging v1 of the patch, so that just the changes of the correct v5 remain. Cc: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-06Bluetooth: hci_h5: close serdev device and free hu in h5_closeAnant Thazhemadam1-2/+6
commit 70f259a3f4276b71db365b1d6ff1eab805ea6ec3 upstream. When h5_close() gets called, the memory allocated for the hu gets freed only if hu->serdev doesn't exist. This leads to a memory leak. So when h5_close() is requested, close the serdev device instance and free the memory allocated to the hu entirely instead. Fixes: https://syzkaller.appspot.com/bug?extid=6ce141c55b2f7aafd1c4 Reported-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com Tested-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-18 17:23:23 +0300