summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)AuthorFilesLines
2022-11-26Merge tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linuxLinus Torvalds1-44/+38
Pull block fixes from Jens Axboe: - A few fixes for s390 sads (Stefan, Colin) - Ensure that ublk doesn't reorder requests, as that can be problematic on devices that need specific ordering (Ming) - Fix a queue reference leak in disk allocation handling (Christoph) * tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linux: ublk_drv: don't forward io commands in reserve order s390/dasd: fix possible buffer overflow in copy_pair_show s390/dasd: fix no record found for raw_track_access s390/dasd: increase printing of debug data payload s390/dasd: Fix spelling mistake "Ivalid" -> "Invalid" blk-mq: fix queue reference leak on blk_mq_alloc_disk_for_queue failure
2022-11-24ublk_drv: don't forward io commands in reserve orderMing Lei1-44/+38
Either ublk_can_use_task_work() is true or not, io commands are forwarded to ublk server in reverse order, since llist_add() is always to add one element to the head of the list. Even though block layer doesn't guarantee request dispatch order, requests should be sent to hardware in the sequence order generated from io scheduler, which usually considers the request's LBA, and order is often important for HDD. So forward io commands in the sequence made from io scheduler by aligning task work with current io_uring command's batch handling, and it has been observed that both can get similar performance data if IORING_SETUP_COOP_TASKRUN is set from ublk server. Reported-by: Andreas Hindborg <andreas.hindborg@wdc.com> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221121155645.396272-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-19Merge tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linuxLinus Torvalds1-2/+2
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - Two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira) - Memory leak fix in nvmet (Sagi Grimberg) - Regression fix for block cgroups pinning the wrong blkcg, causing leaks of cgroups and blkcgs (Chris) - UAF fix for drbd setup error handling (Dan) - Fix DMA alignment propagation in DM (Keith) * tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux: dm-log-writes: set dma_alignment limit in io_hints dm-integrity: set dma_alignment limit in io_hints block: make blk_set_default_limits() private dm-crypt: provide dma_alignment limit in io_hints block: make dma_alignment a stacking queue_limit nvmet: fix a memory leak in nvmet_auth_set_key nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000 drbd: use after free in drbd_create_device() nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro blk-cgroup: properly pin the parent in blkcg_css_online
2022-11-15drbd: use after free in drbd_create_device()Dan Carpenter1-2/+2
The drbd_destroy_connection() frees the "connection" so use the _safe() iterator to prevent a use after free. Fixes: b6f85ef9538b ("drbd: Iterate over all connections") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/Y3Jd5iZRbNQ9w6gm@kili Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-05Merge tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linuxLinus Torvalds2-47/+74
Pull block fixes from Jens Axboe: - Fixes for the ublk driver (Ming) - Fixes for error handling memory leaks (Chen Jun, Chen Zhongjin) - Explicitly clear the last request in a chain when the plug is flushed, as it may have already been issued (Al) * tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linux: block: blk_add_rq_to_plug(): clear stale 'last' after flush blk-mq: Fix kmemleak in blk_mq_init_allocated_queue block: Fix possible memory leak for rq_wb on add_disk failure ublk_drv: add ublk_queue_cmd() for cleanup ublk_drv: avoid to touch io_uring cmd in blk_mq io path ublk_drv: comment on ublk_driver entry of Kconfig ublk_drv: return flag of UBLK_F_URING_CMD_COMP_IN_TASK in case of module
2022-10-31ublk_drv: add ublk_queue_cmd() for cleanupMing Lei1-26/+21
Add helper of ublk_queue_cmd() so that both ublk_queue_rq() and ublk_handle_need_get_data() can reuse this helper. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221029010432.598367-5-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-31ublk_drv: avoid to touch io_uring cmd in blk_mq io pathMing Lei1-30/+53
io_uring cmd is supposed to be used in ubq daemon context mainly, and we should try to avoid to touch it in ublk io submission context, otherwise this data could become shared between the two contexts, and performance is hurt. So link request into one per-queue list, and use same batching policy of io_uring command, just avoid to touch ucmd in blk-mq io context. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221029010432.598367-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-31ublk_drv: comment on ublk_driver entry of KconfigMing Lei1-0/+6
Add help info for choosing to build ublk_drv as module or builtin. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221029010432.598367-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-31ublk_drv: return flag of UBLK_F_URING_CMD_COMP_IN_TASK in case of moduleMing Lei1-0/+3
UBLK_F_URING_CMD_COMP_IN_TASK needs to be set and returned to userspace if ublk driver is built as module, otherwise userspace may get wrong flags shown. Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221029010432.598367-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-30Merge tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linuxLinus Torvalds1-1/+3
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - make the multipath dma alignment match the non-multipath one (Keith Busch) - fix a bogus use of sg_init_marker() (Nam Cao) - fix circulr locking in nvme-tcp (Sagi Grimberg) - Initialization fix for requests allocated via the special hw queue allocator (John) - Fix for a regression added in this release with the batched completions of end_io backed requests (Ming) - Error handling leak fix for rbd (Yang) - Error handling leak fix for add_disk() failure (Yu) * tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linux: blk-mq: Properly init requests from blk_mq_alloc_request_hctx() blk-mq: don't add non-pt request with ->end_io to batch rbd: fix possible memory leak in rbd_sysfs_init() nvme-multipath: set queue dma alignment to 3 nvme-tcp: fix possible circular locking when deleting a controller under memory pressure nvme-tcp: replace sg_init_marker() with sg_init_table() block: fix memory leak for elevator on add_disk failure
2022-10-27rbd: fix possible memory leak in rbd_sysfs_init()Yang Yingliang1-1/+3
If device_register() returns error in rbd_sysfs_init(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. As comment of device_add() says, it should call put_device() to drop the reference count that was set in device_initialize() when it fails, so the name can be freed in kobject_cleanup(). Fault injection test can trigger this problem: unreferenced object 0xffff88810173aa78 (size 8): comm "modprobe", pid 247, jiffies 4294714278 (age 31.789s) hex dump (first 8 bytes): 72 62 64 00 81 88 ff ff rbd..... backtrace: [<00000000f58fae56>] __kmalloc_node_track_caller+0x44/0x1b0 [<00000000bdd44fe7>] kstrdup+0x3a/0x70 [<00000000f7844d0b>] kstrdup_const+0x63/0x80 [<000000001b0a0eeb>] kvasprintf_const+0x10b/0x190 [<00000000a47bd894>] kobject_set_name_vargs+0x56/0x150 [<00000000d5edbf18>] dev_set_name+0xab/0xe0 [<00000000f5153e80>] device_add+0x106/0x1f20 Fixes: dfc5606dc513 ("rbd: replace the rbd sysfs interface") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20221027091918.2294132-1-yangyingliang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-22Merge tag 'block-6.1-2022-10-20' of git://git.kernel.dk/linuxLinus Torvalds2-9/+7
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - fix nvme-hwmon for DMA non-cohehrent architectures (Serge Semin) - add a nvme-hwmong maintainer (Christoph Hellwig) - fix error pointer dereference in error handling (Dan Carpenter) - fix invalid memory reference in nvmet_subsys_attr_qid_max_show (Daniel Wagner) - don't limit the DMA segment size in nvme-apple (Russell King) - fix workqueue MEM_RECLAIM flushing dependency (Sagi Grimberg) - disable write zeroes on various Kingston SSDs (Xander Li) - fix a memory leak with block device tracing (Ye) - flexible-array fix for ublk (Yushan) - document the ublk recovery feature from this merge window (ZiyangZhang) - remove dead bfq variable in struct (Yuwei) - error handling rq clearing fix (Yu) - add an IRQ safety check for the cached bio freeing (Pavel) - drbd bio cloning fix (Christoph) * tag 'block-6.1-2022-10-20' of git://git.kernel.dk/linux: blktrace: remove unnessary stop block trace in 'blk_trace_shutdown' blktrace: fix possible memleak in '__blk_trace_remove' blktrace: introduce 'blk_trace_{start,stop}' helper bio: safeguard REQ_ALLOC_CACHE bio put block, bfq: remove unused variable for bfq_queue drbd: only clone bio if we have a backing device ublk_drv: use flexible-array member instead of zero-length array nvmet: fix invalid memory reference in nvmet_subsys_attr_qid_max_show nvmet: fix workqueue MEM_RECLAIM flushing dependency nvme-hwmon: kmalloc the NVME SMART log buffer nvme-hwmon: consistently ignore errors from nvme_hwmon_init nvme: add Guenther as nvme-hwmon maintainer nvme-apple: don't limit DMA segement size nvme-pci: disable write zeroes on various Kingston SSD nvme: fix error pointer dereference in error handling Documentation: document ublk user recovery feature blk-mq: fix null pointer dereference in blk_mq_clear_rq_mapping()
2022-10-20drbd: only clone bio if we have a backing deviceChristoph Böhmwalder1-8/+6
Commit c347a787e34cb (drbd: set ->bi_bdev in drbd_req_new) moved a bio_set_dev call (which has since been removed) to "earlier", from drbd_request_prepare to drbd_req_new. The problem is that this accesses device->ldev->backing_bdev, which is not NULL-checked at this point. When we don't have an ldev (i.e. when the DRBD device is diskless), this leads to a null pointer deref. So, only allocate the private_bio if we actually have a disk. This is also a small optimization, since we don't clone the bio to only to immediately free it again in the diskless case. Fixes: c347a787e34cb ("drbd: set ->bi_bdev in drbd_req_new") Co-developed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Co-developed-by: Joel Colledge <joel.colledge@linbit.com> Signed-off-by: Joel Colledge <joel.colledge@linbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20221020085205.129090-1-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-20ublk_drv: use flexible-array member instead of zero-length arrayYushan Zhou1-1/+1
Eliminate the following coccicheck warning: ./drivers/block/ublk_drv.c:127:16-19: WARNING use flexible-array member instead Signed-off-by: Yushan Zhou <katrinzhou@tencent.com> Link: https://lore.kernel.org/r/20221018100132.355393-1-zys.zljxml@gmail.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-17Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
2022-10-14Merge tag 'mm-stable-2022-10-13' of ↵Linus Torvalds1-23/+3
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more MM updates from Andrew Morton: - fix a race which causes page refcounting errors in ZONE_DEVICE pages (Alistair Popple) - fix userfaultfd test harness instability (Peter Xu) - various other patches in MM, mainly fixes * tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (29 commits) highmem: fix kmap_to_page() for kmap_local_page() addresses mm/page_alloc: fix incorrect PGFREE and PGALLOC for high-order page mm/selftest: uffd: explain the write missing fault check mm/hugetlb: use hugetlb_pte_stable in migration race check mm/hugetlb: fix race condition of uffd missing/minor handling zram: always expose rw_page LoongArch: update local TLB if PTE entry exists mm: use update_mmu_tlb() on the second thread kasan: fix array-bounds warnings in tests hmm-tests: add test for migrate_device_range() nouveau/dmem: evict device private memory during release nouveau/dmem: refactor nouveau_dmem_fault_copy_one() mm/migrate_device.c: add migrate_device_range() mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page() mm/memremap.c: take a pgmap reference on page allocation mm: free device private pages have zero refcount mm/memory.c: fix race when faulting a device private page mm/damon: use damon_sz_region() in appropriate place mm/damon: move sz_damon_region to damon_sz_region lib/test_meminit: add checks for the allocation functions ...
2022-10-13zram: always expose rw_pageBrian Geffon1-23/+3
Currently zram will adjust its fops to a version which does not contain rw_page when a backing device has been assigned. This is done to prevent upper layers from assuming a synchronous operation when a page may have been written back. This forces every operation through bio which has overhead associated with bio_alloc/frees. The code can be simplified to always expose an rw_page method and only in the rare event that a page is written back we instead will return -EOPNOTSUPP forcing the upper layer to fallback to bio. Link: https://lkml.kernel.org/r/20221003144832.2906610-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Rom Lemarchand <romlem@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-12treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld1-2/+2
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11Merge tag 'mm-stable-2022-10-08' of ↵Linus Torvalds2-22/+31
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ...
2022-10-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-18/+92
Pull virtio updates from Michael Tsirkin: - 9k mtu perf improvements - vdpa feature provisioning - virtio blk SECURE ERASE support - fixes and cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_pci: don't try to use intxif pin is zero vDPA: conditionally read MTU and MAC in dev cfg space vDPA: fix spars cast warning in vdpa_dev_net_mq_config_fill vDPA: check virtio device features to detect MQ vDPA: check VIRTIO_NET_F_RSS for max_virtqueue_paris's presence vDPA: only report driver features if FEATURES_OK is set vDPA: allow userspace to query features of a vDPA device virtio_blk: add SECURE ERASE command support vp_vdpa: support feature provisioning vdpa_sim_net: support feature provisioning vdpa: device feature provisioning virtio-net: use mtu size as buffer length for big packets virtio-net: introduce and use helper function for guest gso support checks virtio: drop vp_legacy_set_queue_size virtio_ring: make vring_alloc_queue_packed prettier virtio_ring: split: Operators use unified style vhost: add __init/__exit annotations to module init/exit funcs
2022-10-08Merge tag 'driver-core-6.1-rc1' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core and debug printk changes for 6.1-rc1. Included in here is: - dynamic debug updates for the core and the drm subsystem. The drm changes have all been acked by the relevant maintainers - kernfs fixes for syzbot reported problems - kernfs refactors and updates for cgroup requirements - magic number cleanups and removals from the kernel tree (they were not being used and they really did not actually do anything) - other tiny cleanups All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits) docs: filesystems: sysfs: Make text and code for ->show() consistent Documentation: NBD_REQUEST_MAGIC isn't a magic number a.out: restore CMAGIC device property: Add const qualifier to device_get_match_data() parameter drm_print: add _ddebug descriptor to drm_*dbg prototypes drm_print: prefer bare printk KERN_DEBUG on generic fn drm_print: optimize drm_debug_enabled for jump-label drm-print: add drm_dbg_driver to improve namespace symmetry drm-print.h: include dyndbg header drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro drm_print: interpose drm_*dbg with forwarding macros drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers. drm_print: condense enum drm_debug_category debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs() Documentation: ENI155_MAGIC isn't a magic number Documentation: NBD_REPLY_MAGIC isn't a magic number nbd: remove define-only NBD_MAGIC, previously magic number Documentation: FW_HEADER_MAGIC isn't a magic number Documentation: EEPROM_MAGIC_VALUE isn't a magic number ...
2022-10-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-6/+5
Pull rdma updates from Jason Gunthorpe: "Not a big list of changes this cycle, mostly small things. The new MANA rdma driver should come next cycle along with a bunch of work on rxe. Summary: - Small bug fixes in mlx5, efa, rxe, hns, irdma, erdma, siw - rts tracing improvements - Code improvements: strlscpy conversion, unused parameter, spelling mistakes, unused variables, flex arrays - restrack device details report for hns - Simplify struct device initialization in SRP - Eliminate the never-used service_mask support in IB CM - Make rxe not print to the console for some kinds of network packets - Asymetric paths and router support in the CM through netlink messages - DMABUF importer support for mlx5devx umem's" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (84 commits) RDMA/rxe: Remove error/warning messages from packet receiver path RDMA/usnic: fix set-but-not-unused variable 'flags' warning IB/hfi1: Use skb_put_data() instead of skb_put/memcpy pair RDMA/hns: Unified Log Printing Style RDMA/hns: Replacing magic number with macros in apply_func_caps() RDMA/hns: Repacing 'dseg_len' by macros in fill_ext_sge_inl_data() RDMA/hns: Remove redundant 'max_srq_desc_sz' in caps RDMA/hns: Remove redundant 'num_mtt_segs' and 'max_extend_sg' RDMA/hns: Remove redundant 'phy_addr' in hns_roce_hem_list_find_mtt() RDMA/hns: Remove redundant 'use_lowmem' argument from hns_roce_init_hem_table() RDMA/hns: Remove redundant 'bt_level' for hem_list_alloc_item() RDMA/hns: Remove redundant 'attr_mask' in modify_qp_init_to_init() RDMA/hns: Remove unnecessary brackets when getting point RDMA/hns: Remove unnecessary braces for single statement blocks RDMA/hns: Cleanup for a spelling error of Asynchronous IB/rdmavt: Add __init/__exit annotations to module init/exit funcs RDMA/rxe: Remove redundant num_sge fields RDMA/mlx5: Enable ATS support for MRs and umems RDMA/mlx5: Add support for dmabuf to devx umem RDMA/core: Add UVERBS_ATTR_RAW_FD ...
2022-10-07Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linuxLinus Torvalds21-237/+598
Pull block updates from Jens Axboe: - NVMe pull requests via Christoph: - handle number of queue changes in the TCP and RDMA drivers (Daniel Wagner) - allow changing the number of queues in nvmet (Daniel Wagner) - also consider host_iface when checking ip options (Daniel Wagner) - don't map pages which can't come from HIGHMEM (Fabio M. De Francesco) - avoid unnecessary flush bios in nvmet (Guixin Liu) - shrink and better pack the nvme_iod structure (Keith Busch) - add comment for unaligned "fake" nqn (Linjun Bao) - print actual source IP address through sysfs "address" attr (Martin Belanger) - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang) - handle effects after freeing the request (Keith Busch) - copy firmware_rev on each init (Keith Busch) - restrict management ioctls to admin (Keith Busch) - ensure subsystem reset is single threaded (Keith Busch) - report the actual number of tagset maps in nvme-pci (Keith Busch) - small fabrics authentication fixups (Christoph Hellwig) - add common code for tagset allocation and freeing (Christoph Hellwig) - stop using the request_queue in nvmet (Christoph Hellwig) - set min_align_mask before calculating max_hw_sectors (Rishabh Bhatnagar) - send a rediscover uevent when a persistent discovery controller reconnects (Sagi Grimberg) - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi) - MD pull request via Song: - Various raid5 fix and clean up, by Logan Gunthorpe and David Sloan. - Raid10 performance optimization, by Yu Kuai. - sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu) - IO scheduler switching quisce fix (Keith) - s390/dasd block driver updates (Stefan) - support for recovery for the ublk driver (ZiyangZhang) - rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph) - blk-mq and null_blk map fixes (Bart) - various bcache fixes (Coly, Jilin, Jules) - nbd signal hang fix (Shigeru) - block writeback throttling fix (Yu) - optimize the passthrough mapping handling (me) - prepare block cgroups to being gendisk based (Christoph) - get rid of an old PSI hack in the block layer, moving it to the callers instead where it belongs (Christoph) - blk-throttle fixes and cleanups (Yu) - misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj, Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming, Miaohe, Bart, Coly, Gaosheng * tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits) sbitmap: fix lockup while swapping block: add rationale for not using blk_mq_plug() when applicable block: adapt blk_mq_plug() to not plug for writes that require a zone lock s390/dasd: use blk_mq_alloc_disk blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep nvmet: don't look at the request_queue in nvmet_bdev_set_limits nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all blk-mq: use quiesced elevator switch when reinitializing queues block: replace blk_queue_nowait with bdev_nowait nvme: remove nvme_ctrl_init_connect_q nvme-loop: use the tagset alloc/free helpers nvme-loop: store the generic nvme_ctrl in set->driver_data nvme-loop: initialize sqsize later nvme-fc: use the tagset alloc/free helpers nvme-fc: store the generic nvme_ctrl in set->driver_data nvme-fc: keep ctrl->sqsize in sync with opts->queue_size nvme-rdma: use the tagset alloc/free helpers nvme-rdma: store the generic nvme_ctrl in set->driver_data nvme-tcp: use the tagset alloc/free helpers nvme-tcp: store the generic nvme_ctrl in set->driver_data ...
2022-10-07virtio_blk: add SECURE ERASE command supportAlvaro Karsz1-18/+92
Support for the VIRTIO_BLK_F_SECURE_ERASE VirtIO feature. A device that offers this feature can receive VIRTIO_BLK_T_SECURE_ERASE commands. A device which supports this feature has the following fields in the virtio config: - max_secure_erase_sectors - max_secure_erase_seg - secure_erase_sector_alignment max_secure_erase_sectors and secure_erase_sector_alignment are expressed in 512-byte units. Every secure erase command has the following fields: - sectors: The starting offset in 512-byte units. - num_sectors: The number of sectors. Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Message-Id: <20220921082729.2516779-1-alvaro.karsz@solid-run.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-10-07Merge tag 'v6.0' into rdma.git for-nextJason Gunthorpe8-32/+89
Trvial merge conflicts against rdma.git for-rc resolved matching linux-next: drivers/infiniband/hw/hns/hns_roce_hw_v2.c drivers/infiniband/hw/hns/hns_roce_main.c https://lore.kernel.org/r/20220929124005.105149-1-broonie@kernel.org Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-10-04Merge tag 'net-next-6.1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ...
2022-10-04zram: keep comments within 80-columns limitSergey Senozhatsky1-8/+11
Several trivial fixups (that I should have spotted during review). Link: https://lkml.kernel.org/r/20220914052033.838050-1-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04zram: do not waste zram_table_entry flags bitsSergey Senozhatsky2-8/+9
zram_table_entry::flags stores object size in the lower bits and zram pageflags in the upper bits. However, for some reason, we use 24 lower bits, while maximum zram object size is PAGE_SIZE, which requires PAGE_SHIFT bits (up to 16 on arm64). This wastes 24 - PAGE_SHIFT bits that we can use for additional zram pageflags instead. Also add a BUILD_BUG_ON() to alert us should we run out of bits in zram_table_entry::flags. Link: https://lkml.kernel.org/r/20220912152744.527438-1-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Brian Geffon <bgeffon@google.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-28virtio-blk: Fix WARN_ON_ONCE in virtio_queue_rq()Suwan Kim1-6/+5
If a request fails at virtio_queue_rqs(), it is inserted to requeue_list and passed to virtio_queue_rq(). Then blk_mq_start_request() can be called again at virtio_queue_rq() and trigger WARN_ON_ONCE like below trace because request state was already set to MQ_RQ_IN_FLIGHT in virtio_queue_rqs() despite the failure. [ 1.890468] ------------[ cut here ]------------ [ 1.890776] WARNING: CPU: 2 PID: 122 at block/blk-mq.c:1143 blk_mq_start_request+0x8a/0xe0 [ 1.891045] Modules linked in: [ 1.891250] CPU: 2 PID: 122 Comm: journal-offline Not tainted 5.19.0+ #44 [ 1.891504] Hardware name: ChromiumOS crosvm, BIOS 0 [ 1.891739] RIP: 0010:blk_mq_start_request+0x8a/0xe0 [ 1.891961] Code: 12 80 74 22 48 8b 4b 10 8b 89 64 01 00 00 8b 53 20 83 fa ff 75 08 ba 00 00 00 80 0b 53 24 c1 e1 10 09 d1 89 48 34 5b 41 5e c3 <0f> 0b eb b8 65 8b 05 2b 39 b6 7e 89 c0 48 0f a3 05 39 77 5b 01 0f [ 1.892443] RSP: 0018:ffffc900002777b0 EFLAGS: 00010202 [ 1.892673] RAX: 0000000000000000 RBX: ffff888004bc0000 RCX: 0000000000000000 [ 1.892952] RDX: 0000000000000000 RSI: ffff888003d7c200 RDI: ffff888004bc0000 [ 1.893228] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff888004bc0100 [ 1.893506] R10: ffffffffffffffff R11: ffffffff8185ca10 R12: ffff888004bc0000 [ 1.893797] R13: ffffc90000277900 R14: ffff888004ab2340 R15: ffff888003d86e00 [ 1.894060] FS: 00007ffa143a4640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 [ 1.894412] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.894682] CR2: 00005648577d9088 CR3: 00000000053da004 CR4: 0000000000170ee0 [ 1.894953] Call Trace: [ 1.895139] <TASK> [ 1.895303] virtblk_prep_rq+0x1e5/0x280 [ 1.895509] virtio_queue_rq+0x5c/0x310 [ 1.895710] ? virtqueue_add_sgs+0x95/0xb0 [ 1.895905] ? _raw_spin_unlock_irqrestore+0x16/0x30 [ 1.896133] ? virtio_queue_rqs+0x340/0x390 [ 1.896453] ? sbitmap_get+0xfa/0x220 [ 1.896678] __blk_mq_issue_directly+0x41/0x180 [ 1.896906] blk_mq_plug_issue_direct+0xd8/0x2c0 [ 1.897115] blk_mq_flush_plug_list+0x115/0x180 [ 1.897342] blk_add_rq_to_plug+0x51/0x130 [ 1.897543] blk_mq_submit_bio+0x3a1/0x570 [ 1.897750] submit_bio_noacct_nocheck+0x418/0x520 [ 1.897985] ? submit_bio_noacct+0x1e/0x260 [ 1.897989] ext4_bio_write_page+0x222/0x420 [ 1.898000] mpage_process_page_bufs+0x178/0x1c0 [ 1.899451] mpage_prepare_extent_to_map+0x2d2/0x440 [ 1.899603] ext4_writepages+0x495/0x1020 [ 1.899733] do_writepages+0xcb/0x220 [ 1.899871] ? __seccomp_filter+0x171/0x7e0 [ 1.900006] file_write_and_wait_range+0xcd/0xf0 [ 1.900167] ext4_sync_file+0x72/0x320 [ 1.900308] __x64_sys_fsync+0x66/0xa0 [ 1.900449] do_syscall_64+0x31/0x50 [ 1.900595] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 1.900747] RIP: 0033:0x7ffa16ec96ea [ 1.900883] Code: b8 4a 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 e3 02 f8 ff 8b 7c 24 0c 89 c2 b8 4a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 36 89 d7 89 44 24 0c e8 43 03 f8 ff 8b 44 24 [ 1.901302] RSP: 002b:00007ffa143a3ac0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a [ 1.901499] RAX: ffffffffffffffda RBX: 0000560277ec6fe0 RCX: 00007ffa16ec96ea [ 1.901696] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000016 [ 1.901884] RBP: 0000560277ec5910 R08: 0000000000000000 R09: 00007ffa143a4640 [ 1.902082] R10: 00007ffa16e4d39e R11: 0000000000000293 R12: 00005602773f59e0 [ 1.902459] R13: 0000000000000000 R14: 00007fffbfc007ff R15: 00007ffa13ba4000 [ 1.902763] </TASK> [ 1.902877] ---[ end trace 0000000000000000 ]--- To avoid calling blk_mq_start_request() twice, This patch moves the execution of blk_mq_start_request() to the end of virtblk_prep_rq(). And instead of requeuing failed request to plug list in the error path of virtblk_add_req_batch(), it uses blk_mq_requeue_request() to change failed request state to MQ_RQ_IDLE. Then virtblk can safely handle the request on the next trial. Fixes: 0e9911fa768f ("virtio-blk: support mq_ops->queue_rqs()") Reported-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Message-Id: <20220830150153.12627-1-suwan.kim027@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
2022-09-24nbd: remove define-only NBD_MAGIC, previously magic numberнаб1-2/+0
commit f4507164e779 ("nbd: rename the nbd_device variable from lo to nbd") renamed LO_MAGIC to NBD_MAGIC; commit 5ea8d10802ec ("nbd: separate out the config information") removed the last users of that Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Link: https://lore.kernel.org/r/10a80681c5966fed1a1afc696e3db114f481514c.1663280877.git.nabijaczleweli@nabijaczleweli.xyz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY supportZiyangZhang1-0/+116
START_USER_RECOVERY and END_USER_RECOVERY are two new control commands to support user recovery feature. After a crash, user should send START_USER_RECOVERY, it will: (1) check if (a)current ublk_device is UBLK_S_DEV_QUIESCED which was set by quiesce_work and (b)chardev is released (2) reinit all ubqs, including: (a) put the task_struct and reset ->ubq_daemon to NULL. (b) reset all ublk_io. (3) reset ub->mm to NULL. Then, user should start a new process and send FETCH_REQ on each ubq_daemon. Finally, user should send END_USER_RECOVERY, it will: (1) wait for all new ubq_daemons getting ready. (2) update ublksrv_pid (3) unquiesce the request queue and expect incoming ublk_queue_rq() (4) convert ub's state to UBLK_S_DEV_LIVE Note: we can handle STOP_DEV between START_USER_RECOVERY and END_USER_RECOVERY. This is helpful to users who cannot start new process after sending START_USER_RECOVERY ctrl-cmd. Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220923153919.44078-7-ZiyangZhang@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-24ublk_drv: support UBLK_F_USER_RECOVERY_REISSUEZiyangZhang1-4/+18
UBLK_F_USER_RECOVERY_REISSUE implies that: With a dying ubq_daemon, ublk_drv let monitor_work requeues rq issued to userspace(ublksrv) before the ubq_daemon is dying. UBLK_F_USER_RECOVERY_REISSUE is designed for backends which: (1) tolerate double-write since ublk_drv may issue the same rq twice. (2) does not let frontend users get I/O error, such as read-only FS and VM backend. Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220923153919.44078-6-ZiyangZhang@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-24ublk_drv: consider recovery feature in aborting mechanismZiyangZhang1-6/+110
With USER_RECOVERY feature enabled, the monitor_work schedules quiesce_work after finding a dying ubq_daemon. The monitor_work should also abort all rqs issued to userspace before the ubq_daemon is dying. The quiesce_work's job is to: (1) quiesce request queue. (2) check if there is any INFLIGHT rq. If so, we retry until all these rqs are requeued and become IDLE. These rqs should be requeued by ublk_queue_rq(), task work, io_uring fallback wq or monitor_work. (3) complete all ioucmds by calling io_uring_cmd_done(). We are safe to do so because no ioucmd can be referenced now. (5) set ub's state to UBLK_S_DEV_QUIESCED, which means we are ready for recovery. This state is exposed to userspace by GET_DEV_INFO. The driver can always handle STOP_DEV and cleanup everything no matter ub's state is LIVE or QUIESCED. After ub's state is UBLK_S_DEV_QUIESCED, user can recover with new process. Note: we do not change the default behavior with reocvery feature disabled. monitor_work still schedules stop_work and abort inflight rqs. And finally ublk_device is released. Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220923153919.44078-5-ZiyangZhang@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-24ublk_drv: requeue rqs with recovery feature enabledZiyangZhang1-5/+15
With recovery feature enabled, in ublk_queue_rq or task work (in exit_task_work or fallback wq), we requeue rqs instead of ending(aborting) them. Besides, No matter recovery feature is enabled or disabled, we schedule monitor_work immediately. Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220923153919.44078-4-ZiyangZhang@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-24ublk_drv: define macros for recovery feature and check themZiyangZhang1-1/+17
Define some macros for recovery feature. UBLK_S_DEV_QUIESCED implies that ublk_device is quiesced and is ready for recovery. This state can be observed by userspace. UBLK_F_USER_RECOVERY implies that: (1) ublk_drv enables recovery feature. It won't let monitor_work to automatically abort rqs and release the device. (2) With a dying ubq_daemon, ublk_drv ends(aborts) rqs issued to userspace(ublksrv) before crash. (3) With a dying ubq_daemon, in task work and ublk_queue_rq(), ublk_drv requeues rqs. Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220923153919.44078-3-ZiyangZhang@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-24ublk_drv: check 'current' instead of 'ubq_daemon'ZiyangZhang1-2/+10
This check is not atomic. So with recovery feature, ubq_daemon may be modified simultaneously by recovery task. Instead, check 'current' is safe here because 'current' never changes. Also add comment explaining this check, which is really important for understanding recovery feature. Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220923153919.44078-2-ZiyangZhang@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-22block: aoe: use DEFINE_SHOW_ATTRIBUTE to simplify aoe_debugfsLiu Shixin1-13/+2
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20220915023424.3198940-1-liushixin2@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-22block: move from strlcpy with unused retval to strscpyWolfram Sang5-12/+12
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Acked-by: Geoff Levand <geoff@infradead.org> Link: https://lore.kernel.org/r/20220818205958.6552-1-wsa+renesas@sang-engineering.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-22block/drbd: remove useless comments in receive_DataReply()Gaosheng Cui1-3/+0
All implementations of req->collision, _req_may_be_done and drbd_fail_pending_reads have been removed, so remove the comments in receive_DataReply() that provide no useful information. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20220920015216.782190-3-cuigaosheng1@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-22drbd: remove orphan _req_may_be_done() declarationGaosheng Cui1-2/+0
The _req_may_be_done() has been removed by commit 6870ca6d463e ("drbd: factor out master_bio completion and drbd_request destruction paths"), so remove the orphan declaration. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20220920015216.782190-2-cuigaosheng1@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-21rnbd-srv: remove struct rnbd_devChristoph Hellwig3-50/+18
Given that rnbd_srv_sess_dev already has an open_flags member, there is no need for the rnbd_dev indirection as a simple block_device pointer works just as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20220909131509.3263924-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-21rnbd-srv: remove rnbd_dev_{open,close}Christoph Hellwig4-62/+18
These can be trivially open coded in the callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20220909131509.3263924-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-21rnbd-srv: remove rnbd_endioChristoph Hellwig2-15/+7
Fold rnbd_endio into the only caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20220909131509.3263924-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-21rnbd-srv: simplify rnbd_srv_fill_msg_open_rspChristoph Hellwig2-52/+13
Remove all the wrappers and just get the information directly from the block device, or where no such helpers exist the request_queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20220909131509.3263924-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-12block/drbd: remove unused w_start_resync declarationGaosheng Cui1-1/+0
w_start_resync has been removed since commit ac0acb9e39ac ("drbd: use drbd_device_post_work() in more places"), so remove it. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-12zram: don't retry compress incompressible pageAlexey Romanov1-2/+12
It doesn't make sense for us to retry to compress an uncompressible page (comp_len == PAGE_SIZE) in zsmalloc slowpath, because we will be storing it uncompressed anyway. We can avoid wasting time on another compression attempt. It is enough to take lock (zcomp_stream_get) and execute the code below. Link: https://lkml.kernel.org/r/20220824113117.78849-1-avromanov@sberdevices.ru Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru> Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Alexey Romanov <avromanov@sberdevices.ru> Cc: Dmitry Rokosov <DDRokosov@sberdevices.ru> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-12drivers/block/zram/zram_drv.c: do not keep dangling zcomp pointer after zram ↵Sergey Senozhatsky1-9/+4
reset We do all reset operations under write lock, so we don't need to save ->disksize and ->comp to stack variables. Another thing is that ->comp is freed during zram reset, but comp pointer is not NULL-ed, so zram keeps the freed pointer value. Link: https://lkml.kernel.org/r/20220824035100.971816-1-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni3-10/+19
drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-08nbd: Fix hung when signal interrupts nbd_start_device_ioctl()Shigeru Yoshida1-2/+4
syzbot reported hung task [1]. The following program is a simplified version of the reproducer: int main(void) { int sv[2], fd; if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0) return 1; if ((fd = open("/dev/nbd0", 0)) < 0) return 1; if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0) return 1; if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0) return 1; if (ioctl(fd, NBD_DO_IT) < 0) return 1; return 0; } When signal interrupt nbd_start_device_ioctl() waiting the condition atomic_read(&config->recv_threads) == 0, the task can hung because it waits the completion of the inflight IOs. This patch fixes the issue by clearing queue, not just shutdown, when signal interrupt nbd_start_device_ioctl(). Link: https://syzkaller.appspot.com/bug?id=7d89a3ffacd2b83fdd39549bc4d8e0a89ef21239 [1] Reported-by: syzbot+38e6c55d4969a14c1534@syzkaller.appspotmail.com Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220907163502.577561-1-syoshida@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-05rnbd-srv: remove redundant setting of blk_open_flagsGuoqing Jiang1-1/+0
It is not necessary since it is set later just before function return success. Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com> Link: https://lore.kernel.org/r/20220902100055.25724-4-guoqing.jiang@linux.dev Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-18 06:30:02 +0300