summaryrefslogtreecommitdiff
path: root/drivers/block/drbd/drbd_nl.c
AgeCommit message (Collapse)AuthorFilesLines
2021-08-09block: pass a gendisk to blk_queue_update_readaheadChristoph Hellwig1-1/+1
.. and rename the function to disk_update_readahead. This is in preparation for moving the BDI from the request_queue to the gendisk. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210809141744.1203023-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-06block: drbd: drbd_nl: Demote half-complete kernel-doc headersLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): from drivers/block/drbd/drbd_nl.c:24: drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’: drivers/block/drbd/drbd_nl.c:1968:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c:930: warning: Function parameter or member 'flags' not described in 'drbd_determine_dev_size' drivers/block/drbd/drbd_nl.c:930: warning: Function parameter or member 'rs' not described in 'drbd_determine_dev_size' drivers/block/drbd/drbd_nl.c:1148: warning: Function parameter or member 'dc' not described in 'drbd_check_al_size' Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210312105530.2219008-12-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-06block: drbd: drbd_nl: Make conversion to 'enum drbd_ret_code' explicitLee Jones1-5/+8
Fixes the following W=1 kernel build warning(s): from drivers/block/drbd/drbd_nl.c:24: drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_set_role’: drivers/block/drbd/drbd_nl.c:793:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c:795:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’: drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_connect’: drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_disconnect’: drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210312105530.2219008-8-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-05drbd: remove ->this_bdevChristoph Hellwig1-6/+4
DRBD keeps a block device open just to get and set the capacity from it. Switch to primarily using the disk capacity as intended by the block layer, and sync it to the bdev using revalidate_disk_size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24block: lift setting the readahead size into the block layerChristoph Hellwig1-9/+1
Drivers shouldn't really mess with the readahead size, as that is a VM concept. Instead set it based on the optimal I/O size by lifting the algorithm from the md driver when registering the disk. Also set bdi->io_pages there as well by applying the same scheme based on max_sectors. To ensure the limits work well for stacking drivers a new helper is added to update the readahead limits from the block limits, which is also called from disk_stack_limits. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24drbd: remove dead code in device_to_statisticsChristoph Hellwig1-6/+0
Ever since the switch to blk-mq, a lower device not used for VM writeback will not be marked congested, so the check will never trigger. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-05Merge tag 'for-5.9/block-merge-20200804' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+2
Pull block stacking updates from Jens Axboe: "The stacking related fixes depended on both the core block and drivers branches, so here's a topic branch with that change. Outside of that, a late fix from Johannes for zone revalidation" * tag 'for-5.9/block-merge-20200804' of git://git.kernel.dk/linux-block: block: don't do revalidate zones on invalid devices block: remove blk_queue_stack_limits block: remove bdev_stack_limits block: inherit the zoned characteristics in blk_stack_limits
2020-07-21block: remove blk_queue_stack_limitsChristoph Hellwig1-2/+2
This function is just a tiny wrapper around blk_stack_limits. Open code it int the two callers. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook1-3/+3
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-01-30drbd: fifo_alloc() should use struct_sizeStephen Kitt1-1/+2
Switching to struct_size for the allocation in fifo_alloc avoids hard-coding the type of fifo_buffer.values in fifo_alloc. It also provides overflow protection; to avoid pessimistic code being generated by the compiler as a result, this patch also switches fifo_size to unsigned, propagating the change as appropriate. Reviewed-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Stephen Kitt <steve@sk2.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-18drbd: Use pr_warn instead of pr_warningKefeng Wang1-7/+6
As said in commit f2c2cbcc35d4 ("powerpc: Use pr_warn instead of pr_warning"), removing pr_warning so all logging messages use a consistent <prefix>_warn style. Let's do it. Link: http://lkml.kernel.org/r/20191018031850.48498-9-wangkefeng.wang@huawei.com To: linux-kernel@vger.kernel.org Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-07-09Merge branch 'siginfo-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...
2019-05-27signal/drbd: Use send_sig not force_sigEric W. Biederman1-1/+1
The drbd module exclusively sends signals to kernel threads it creates with kthread_create. These kernel threads do not block or ignore signals (only flush signals after they have been delivered), nor can drbd threads possibly be pid namespace init processes so the extra work that force_sig performs that send_sig does not is unnecessary. Further force_sig is for delivering synchronous signals (aka exceptions). The locking in force_sig is not prepared to deal with running processes, as tsk->sighand may change during exec for a running process. In short it is not only unnecessary for drbd to use force_sig it is semantically wrong. With drbd using send_sig it becomes easier to maintain force_sig as only synchronous signals need to be considered. Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: drbd-dev@lists.linbit.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 91Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version [drbd] is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with [drbd] see the file copying if not write to the free software foundation 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 16 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520075212.050796421@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-28netlink: make nla_nest_start() add NLA_F_NESTED flagMichal Kubecek1-4/+4
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")Lars Ellenberg1-0/+16
And also re-enable partial-zero-out + discard aligned. With the introduction of REQ_OP_WRITE_ZEROES, we started to use that for both WRITE_ZEROES and DISCARDS, hoping that WRITE_ZEROES would "do what we want", UNMAP if possible, zero-out the rest. The example scenario is some LVM "thin" backend. While an un-allocated block on dm-thin reads as zeroes, on a dm-thin with "skip_block_zeroing=true", after a partial block write allocated that block, that same block may well map "undefined old garbage" from the backends on LBAs that have not yet been written to. If we cannot distinguish between zero-out and discard on the receiving side, to avoid "undefined old garbage" to pop up randomly at later times on supposedly zero-initialized blocks, we'd need to map all discards to zero-out on the receiving side. But that would potentially do a full alloc on thinly provisioned backends, even when the expectation was to unmap/trim/discard/de-allocate. We need to distinguish on the protocol level, whether we need to guarantee zeroes (and thus use zero-out, potentially doing the mentioned full-alloc), or if we want to put the emphasis on discard, and only do a "best effort zeroing" (by "discarding" blocks aligned to discard-granularity, and zeroing only potential unaligned head and tail clippings to at least *try* to avoid "false positives" in an online-verify later), hoping that someone set skip_block_zeroing=false. For some discussion regarding this on dm-devel, see also https://www.mail-archive.com/dm-devel%40redhat.com/msg07965.html https://www.redhat.com/archives/dm-devel/2018-January/msg00271.html For backward compatibility, P_TRIM means zero-out, unless the DRBD_FF_WZEROES feature flag is agreed upon during handshake. To have upper layers even try to submit WRITE ZEROES requests, we need to announce "efficient zeroout" independently. We need to fixup max_write_zeroes_sectors after blk_queue_stack_limits(): if we can handle "zeroes" efficiently on the protocol, we want to do that, even if our backend does not announce max_write_zeroes_sectors itself. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: skip spurious timeout (ping-timeo) when failing promoteLars Ellenberg1-7/+8
If you try to promote a Secondary while connected to a Primary and allow-two-primaries is NOT set, we will wait for "ping-timeout" to give this node a chance to detect a dead primary, in case the cluster manager noticed faster than we did. But if we then are *still* connected to a Primary, we fail (after an additional timeout of ping-timout). This change skips the spurious second timeout. Most people won't notice really, since "ping-timeout" by default is half a second. But in some installations, ping-timeout may be 10 or 20 seconds or more, and spuriously delaying the error return becomes annoying. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: avoid spurious self-outdating with concurrent disconnect / downLars Ellenberg1-0/+7
If peers are "simultaneously" told to disconnect from each other, either explicitly, or implicitly by taking down the resource, with bad timing, one side may see its disconnect "fail" with a result of "state change failed by peer", and interpret this as "please oudate yourself". Try to catch this by checking for current connection status, and possibly retry as local-only state change instead. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: do not block when adjusting "disk-options" while IO is frozenLars Ellenberg1-8/+29
"suspending" IO is overloaded. It can mean "do not allow new requests" (obviously), but it also may mean "must not complete pending IO", for example while the fencing handlers do their arbitration. When adjusting disk options, we suspend io (disallow new requests), then wait for the activity-log to become unused (drain all IO completions), and possibly replace it with a new activity log of different size. If the other "suspend IO" aspect is active, pending IO completions won't happen, and we would block forever (unkillable drbdsetup process). Fix this by skipping the activity log adjustment if the "al-extents" setting did not change. Also, in case it did change, fail early without blocking if it looks like we would block forever. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: reject attach of unsuitable uuids even if connectedLars Ellenberg1-3/+3
Multiple failure scenario: a) all good Connected Primary/Secondary UpToDate/UpToDate b) lose disk on Primary, Connected Primary/Secondary Diskless/UpToDate c) continue to write to the device, changes only make it to the Secondary storage. d) lose disk on Secondary, Connected Primary/Secondary Diskless/Diskless e) now try to re-attach on Primary This would have succeeded before, even though that is clearly the wrong data set to attach to (missing the modifications from c). Because we only compared our "effective" and the "to-be-attached" data generation uuid tags if (device->state.conn < C_CONNECTED). Fix: change that constraint to (device->state.pdsk != D_UP_TO_DATE) compare the uuids, and reject the attach. This patch also tries to improve the reverse scenario: first lose Secondary, then Primary disk, then try to attach the disk on Secondary. Before this patch, the attach on the Secondary succeeds, but since commit drbd: disconnect, if the wrong UUIDs are attached on a connected peer the Primary will notice unsuitable data, and drop the connection hard. Though unfortunately at a point in time during the handshake where we cannot easily abort the attach on the peer without more refactoring of the handshake. We now reject any attach to "unsuitable" uuids, as long as we can see a Primary role, unless we already have access to "good" data. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: fix confusing error message during attachLars Ellenberg1-5/+44
If we attach a (consistent) backing device, which knows about a last-agreed effective size, and that effective size is *larger* than the currently requested size, we refused to attach with ERR_DISK_TOO_SMALL Failure: (111) Low.dev. smaller than requested DRBD-dev. size. which is confusing to say the least. This patch changes the error code in that case to ERR_IMPLICIT_SHRINK Failure: (170) Implicit device shrinking not allowed. See kernel log. additional info from kernel: To-be-attached device has last effective > current size, and is consistent (9999 > 7777 sectors). Refusing to attach. It also allows to attach with an explicit size. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: centralize printk reporting of new size into drbd_set_my_capacity()Lars Ellenberg1-3/+0
Previously, some implicit resizes that happend during handshake have not been reported as prominently as explicit resize. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-07drbd: Convert from ahash to shashKees Cook1-27/+12
In preparing to remove all stack VLA usage from the kernel[1], this removes the discouraged use of AHASH_REQUEST_ON_STACK in favor of the smaller SHASH_DESC_ON_STACK by converting from ahash-wrapped-shash to direct shash. By removing a layer of indirection this both improves performance and reduces stack usage. The stack allocation will be made a fixed size in a later patch to the crypto subsystem. The bulk of the lines in this change are simple s/ahash/shash/, but the main logic differences are in drbd_csum_ee() and drbd_csum_bio(), which externalizes the page walking with k(un)map_atomic() instead of using scattergather. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-09block: Use blk_queue_flag_*() in drivers instead of queue_flag_*()Bart Van Assche1-2/+2
This patch has been generated as follows: for verb in set_unlocked clear_unlocked set clear; do replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \ $(git grep -lw queue_flag_${verb} drivers block/bsg*) done Except for protecting all queue flag changes with the queue lock this patch does not change any functionality. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-30drbd: rename "usermode_helper" to "drbd_usermode_helper"Greg Kroah-Hartman1-10/+10
Nothing like having a very generic global variable in a tiny driver subsystem to make a mess of the global namespace... Note, there are many other "generic" named global variables in the drbd subsystem, someone should fix those up one day before they hit a linking error. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-30drbd: fix potential deadlock when trying to detach during handshakeLars Ellenberg1-23/+2
When requesting a detach, we first suspend IO, and also inhibit meta-data IO by means of drbd_md_get_buffer(), because we don't want to "fail" the disk while there is IO in-flight: the transition into D_FAILED for detach purposes may get misinterpreted as actual IO error in a confused endio function. We wrap it all into wait_event(), to retry in case the drbd_req_state() returns SS_IN_TRANSIENT_STATE, as it does for example during an ongoing connection handshake. In that example, the receiver thread may need to grab drbd_md_get_buffer() during the handshake to make progress. To avoid potential deadlock with detach, detach needs to grab and release the meta data buffer inside of that wait_event retry loop. To avoid lock inversion between mutex_lock(&device->state_mutex) and drbd_md_get_buffer(device), introduce a new enum chg_state_flag CS_INHIBIT_MD_IO, and move the call to drbd_md_get_buffer() inside the state_mutex grabbed in drbd_req_state(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-30drbd: new disk-option disable-write-sameLars Ellenberg1-3/+12
Some backend devices claim to support write-same, but would fail actual write-same requests. Allow to set (or toggle) whether or not DRBD tries to support write-same. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28drbd: Drop unnecessary staticJulia Lawall1-1/+1
Drop static on a local variable, when the variable is initialized before any use, on every possible execution path through the function. The static has no benefit, and dropping it reduces the code size. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @bad exists@ position p; identifier x; type T; @@ static T x@p; ... x = <+...x...+> @@ identifier x; expression e; type T; position p != bad.p; @@ -static T x@p; ... when != x when strict ?x = e; // </smpl> The change in code size is indicates by the following output from the size command. before: text data bss dec hex filename 67299 2291 1056 70646 113f6 drivers/block/drbd/drbd_nl.o after: text data bss dec hex filename 67283 2291 1056 70630 113e6 drivers/block/drbd/drbd_nl.o Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-04-08block: remove the discard_zeroes_data flagChristoph Hellwig1-6/+1
Now that we use the proper REQ_OP_WRITE_ZEROES operation everywhere we can kill this hack. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08drbd: implement REQ_OP_WRITE_ZEROESChristoph Hellwig1-0/+2
It seems like DRBD assumes its on the wire TRIM request always zeroes data. Use that fact to implement REQ_OP_WRITE_ZEROES. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-02block: Use pointer to backing_dev_info from request_queueJan Kara1-5/+7
We will want to have struct backing_dev_info allocated separately from struct request_queue. As the first step add pointer to backing_dev_info to request_queue and convert all users touching it. No functional changes in this patch. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14drbd: code cleanups without semantic changesFabian Frederick1-6/+8
This contains various cosmetic fixes ranging from simple typos to const-ifying, and using booleans properly. Original commit messages from Fabian's patch set: drbd: debugfs: constify drbd_version_fops drbd: use seq_put instead of seq_print where possible drbd: include linux/uaccess.h instead of asm/uaccess.h drbd: use const char * const for drbd strings drbd: kerneldoc warning fix in w_e_end_data_req() drbd: use unsigned for one bit fields drbd: use bool for peer is_ states drbd: fix typo drbd: use | for bitmask combination drbd: use true/false for bool drbd: fix drbd_bm_init() comments drbd: introduce peer state union drbd: fix maybe_pull_ahead() locking comments drbd: use bool for growing drbd: remove redundant declarations drbd: replace if/BUG by BUG_ON Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14drbd: introduce WRITE_SAME supportLars Ellenberg1-9/+79
We will support WRITE_SAME, if * all peers support WRITE_SAME (both in kernel and DRBD version), * all peer devices support WRITE_SAME * logical_block_size is identical on all peers. We may at some point introduce a fallback on the receiving side for devices/kernels that do not support WRITE_SAME, by open-coding a submit loop. But not yet. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14drbd: discard_zeroes_if_aligned allows "thin" resync for discard_zeroes_data=0Lars Ellenberg1-3/+6
Even if discard_zeroes_data != 0, if discard_zeroes_if_aligned is set, we assume we can reliably zero-out/discard using the drbd_issue_peer_discard() helper. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14drbd: don't forget error completion when "unsuspending" IOLars Ellenberg1-16/+32
Possibly sequence of events: SyncTarget is made Primary, then loses replication link (only path to good data on SyncSource). Behavior is then controlled by the on-no-data-accessible policy, which defaults to OND_IO_ERROR (may be set to OND_SUSPEND_IO). If OND_IO_ERROR is in fact the current policy, we clear the susp_fen (IO suspended due to fencing policy) flag, do NOT set the susp_nod (IO suspended due to no data) flag. But we forgot to call the IO error completion for all pending, suspended, requests. While at it, also add a race check for a theoretically possible race with a new handshake (network hickup), we may be able to re-send requests, and can avoid passing IO errors up the stack. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14drbd: introduce unfence-peer handlerLars Ellenberg1-1/+1
When resync is finished, we already call the "after-resync-target" handler (on the former sync target, obviously), once per volume. Paired with the before-resync-target handler, you can create snapshots, before the resync causes the volumes to become inconsistent, and discard those snapshots again, once they are no longer needed. It was also overloaded to be paired with the "fence-peer" handler, to "unfence" once the volumes are up-to-date and known good. This has some disadvantages, though: we call "fence-peer" for the whole connection (once for the group of volumes), but would call unfence as side-effect of after-resync-target once for each volume. Also, we fence on a (current, or about to become) Primary, which will later become the sync-source. Calling unfence only as a side effect of the after-resync-target handler opens a race window, between a new fence on the Primary (SyncTarget) and the unfence on the SyncTarget, which is difficult to close without some kind of "cluster wide lock" in those handlers. We would not need those handlers if we could still communicate. Which makes trying to aquire a cluster wide lock from those handlers seem like a very bad idea. This introduces the "unfence-peer" handler, which will be called per connection (once for the group of volumes), just like the fence handler, only once all volumes are back in sync, and on the SyncSource. Which is expected to be the node that previously called "fence", the node that is currently allowed to be Primary, and thus the only node that could trigger a new "fence" that could race with this unfence. Which makes us not need any cluster wide synchronization here, serializing two scripts running on the same node is trivial. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14drbd: possibly disable discard support, if backend has discard_zeroes_data=0Lars Ellenberg1-25/+55
Now that we have the discard_zeroes_if_aligned setting, we should also check it when setting up our queue parameters on the primary, not only on the receiving side. We announce discard support, UNLESS * we are connected to a peer that does not support TRIM on the DRBD protocol level. Otherwise, it would either discard, or do a fallback to zero-out, depending on its backend and configuration. * our local backend does not support discards, or (discard_zeroes_data=0 AND discard_zeroes_if_aligned=no). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14drbd: when receiving P_TRIM, zero-out partial unaligned chunksLars Ellenberg1-4/+11
We can avoid spurious data divergence caused by partially-ignored discards on certain backends with discard_zeroes_data=0, if we translate partial unaligned discard requests into explicit zero-out. The relevant use case is LVM/DM thin. If on different nodes, DRBD is backed by devices with differing discard characteristics, discards may lead to data divergence (old data or garbage left over on one backend, zeroes due to unmapped areas on the other backend). Online verify would now potentially report tons of spurious differences. While probably harmless for most use cases (fstrim on a file system), DRBD cannot have that, it would violate our promise to upper layers that our data instances on the nodes are identical. To be correct and play safe (make sure data is identical on both copies), we would have to disable discard support, if our local backend (on a Primary) does not support "discard_zeroes_data=true". We'd also have to translate discards to explicit zero-out on the receiving (typically: Secondary) side, unless the receiving side supports "discard_zeroes_data=true". Which both would allocate those blocks, instead of unmapping them, in contrast with expectations. LVM/DM thin does set discard_zeroes_data=0, because it silently ignores discards to partial chunks. We can work around this by checking the alignment first. For unaligned (wrt. alignment and granularity) or too small discards, we zero-out the initial (and/or) trailing unaligned partial chunks, but discard all the aligned full chunks. At least for LVM/DM thin, the result is effectively "discard_zeroes_data=1". Arguably it should behave this way internally, by default, and we'll try to make that happen. But our workaround is still valid for already deployed setups, and for other devices that may behave this way. Setting discard-zeroes-if-aligned=yes will allow DRBD to use discards, and to announce discard_zeroes_data=true, even on backends that announce discard_zeroes_data=false. Setting discard-zeroes-if-aligned=no will cause DRBD to always fall-back to zero-out on the receiving side, and to not even announce discard capabilities on the Primary, if the respective backend announces discard_zeroes_data=false. We used to ignore the discard_zeroes_data setting completely. To not break established and expected behaviour, and suddenly cause fstrim on thin-provisioned LVs to run out-of-space, instead of freeing up space, the default value is "yes". Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14drbd: fix for truncated minor number in callback command lineLars Ellenberg1-2/+2
The command line parameter the kernel module uses to communicate the device minor to userland helper is flawed in a way that the device indentifier "minor-%d" is being truncated to minors with a maximum of 5 digits. But DRBD 8.4 allows 2^20 == 1048576 minors, thus a minimum of 7 digits must be supported. Reported by Veit Wahlich on drbd-dev. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14drbd: Introduce new disk config option rs-discard-granularityPhilipp Reisner1-3/+29
As long as the value is 0 the feature is disabled. With setting it to a positive value, DRBD limits and aligns its resync requests to the rs-discard-granularity setting. If the sync source detects all zeros in such a block, the resync target discards the range on disk. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14drbd: Kill code duplicationPhilipp Reisner1-8/+10
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-10block/drbd: align properly u64 in nl messagesNicolas Dichtel1-12/+16
The attribute 0 is never used in drbd, so let's use it as pad attribute in netlink messages. This minimizes the patch. Note that this patch is only compile-tested. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-1/+1
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-27drbd: Use shash and ahashHerbert Xu1-22/+37
This patch replaces uses of the long obsolete hash interface with either shash (for non-SG users) or ahash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-11-25drbd: fix error path during resizeLars Ellenberg1-30/+38
In case the lower level device size changed, but some other internal details of the resize did not work out, drbd_determine_dev_size() would try to restore the previous settings, trusting drbd_md_set_sector_offsets() to "do the right thing", but overlooked that this internally may set the meta data base offset based on device size. This could end up with incomplete on-disk meta data layout change, and ultimately lead to data corruption (if the failure was not noticed or ignored by the operator, and other things go wrong as well). Just remember all meta data related offsets/sizes, and on error restore them all. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-25drbd: avoid potential deadlock during handshakeLars Ellenberg1-14/+19
During handshake communication, we also reconsider our device size, using drbd_determine_dev_size(). Just in case we need to change the offsets or layout of our on-disk metadata, we lock out application and other meta data IO, and wait for the activity log to be "idle" (no more referenced extents). If this handshake happens just after a connection loss, with a fencing policy of "resource-and-stonith", we have frozen IO. If, additionally, the activity log was "starving" (too many incoming random writes at that point in time), it won't become idle, ever, because of the frozen IO, and this would be a lockup of the receiver thread, and consquentially of DRBD. Previous logic (re-)initialized with a special "empty" transaction block, which required the activity log to fully drain first. Instead, write out some standard activity log transactions. Using lc_try_lock_for_transaction() instead of lc_try_lock() does not care about pending activity log references, avoiding the potential deadlock. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-25drbd: make suspend_io() / resume_io() must be thread and recursion safePhilipp Reisner1-3/+5
Avoid to prematurely resume application IO: don't set/clear a single bit, but inc/dec an atomic counter. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-25drbd: fix memory leak in drbd_adm_resizeOleg Drokin1-0/+2
new_disk_conf could be leaked if the follow on checks fail, so make sure to free it on error if it was not assigned yet. Found with smatch. Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-25drbd: make drbd known to lsblk: use bd_link_disk_holderLars Ellenberg1-35/+86
lsblk should be able to pick up stacking device driver relations involving DRBD conveniently. Even though upstream kernel since 2011 says "DON'T USE THIS UNLESS YOU'RE ALREADY USING IT." a new user has been added since (bcache), which sets the precedences for us to use it as well. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 10:48:15 +0300