| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 359afc8eb02a518fbdd0cbd462c8c2827c6cbec2 upstream.
Commit 89d9cec3b1e9 ("PM: runtime: Clear power.needs_force_resume in
pm_runtime_reinit()") added provisional clearing of power.needs_force_resume
to pm_runtime_reinit(), but it is done unconditionally which is a
mistake because pm_runtime_reinit() may race with driver probing
and removal [1].
To address this, notice that power.needs_force_resume should never
be set when runtime PM is enabled and so it only needs to be cleared
when runtime PM is disabled, and update pm_runtime_init() to only
clear that flag when runtime PM is disabled.
Fixes: 89d9cec3b1e9 ("PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()")
Reported-by: Ed Tsai <ed.tsai@mediatek.com>
Closes: https://lore.kernel.org/linux-pm/20251215122154.3180001-1-ed.tsai@mediatek.com/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 6.17+ <stable@vger.kernel.org> # 6.17+
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12807571.O9o76ZdvQC@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2e41e3ca4729455e002bcb585f0d3749ee66d572 upstream.
Move the pm_suspend_target_state definition for CONFIG_SUSPEND
unset from the wakeup code into the headers so as to allow it
to still be used elsewhere when CONFIG_SUSPEND is not set.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ rjw: Changelog and subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c26fabe73330d983c7ce822c6b6ec0879b4da61f ]
Until commit 5c2712387d48 ("cacheinfo: Fix LLC is not exported through
sysfs"), cacheinfo called populate_cache_leaves() for CPU coming online
which let the arch specific functions handle (at least on x86)
populating the shared_cpu_map. However, with the changes in the
aforementioned commit, populate_cache_leaves() is not called when a CPU
comes online as a result of hotplug since last_level_cache_is_valid()
returns true as the cacheinfo data is not discarded. The CPU coming
online is not present in shared_cpu_map, however, it will not be added
since the cpu_cacheinfo->cpu_map_populated flag is set (it is set in
populate_cache_leaves() when cacheinfo is first populated for x86)
This can lead to inconsistencies in the shared_cpu_map when an offlined
CPU comes online again. Example below depicts the inconsistency in the
shared_cpu_list in cacheinfo when CPU8 is offlined and onlined again on
a 3rd Generation EPYC processor:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# echo 1 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8
# cat /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list
136
# cat /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list
9-15,136-143
Clear the flag when the CPU is removed from shared_cpu_map when
cache_shared_cpu_map_remove() is called during CPU hotplug. This will
allow cache_shared_cpu_map_setup() to add the CPU coming back online in
the shared_cpu_map. Set the flag again when the shared_cpu_map is setup.
Following are results of performing the same test as described above with
the changes:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# echo 1 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# cat /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list
8,136
# cat /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list
8-15,136-143
Fixes: 5c2712387d48 ("cacheinfo: Fix LLC is not exported through sysfs")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230508084115.1157-3-kprateek.nayak@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5c2712387d4850e0b64121d5fd3e6c4e84ea3266 ]
After entering 6.3-rc1 the LLC cacheinfo is not exported on our ACPI
based arm64 server. This is because the LLC cacheinfo is partly reset
when secondary CPUs boot up. On arm64 the primary cpu will allocate
and setup cacheinfo:
init_cpu_topology()
for_each_possible_cpu()
fetch_cache_info() // Allocate cacheinfo and init levels
detect_cache_attributes()
cache_shared_cpu_map_setup()
if (!last_level_cache_is_valid()) // not valid, setup LLC
cache_setup_properties() // setup LLC
On secondary CPU boot up:
detect_cache_attributes()
populate_cache_leaves()
get_cache_type() // Get cache type from clidr_el1,
// for LLC type=CACHE_TYPE_NOCACHE
cache_shared_cpu_map_setup()
if (!last_level_cache_is_valid()) // Valid and won't go to this branch,
// leave LLC's type=CACHE_TYPE_NOCACHE
The last_level_cache_is_valid() use cacheinfo->{attributes, fw_token} to
test it's valid or not, but populate_cache_leaves() will only reset
LLC's type, so we won't try to re-setup LLC's type and leave it
CACHE_TYPE_NOCACHE and won't export it through sysfs.
This patch tries to fix this by not re-populating the cache leaves if
the LLC is valid.
Fixes: 5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230328114915.33340-1-yangyicong@huawei.com
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ecaef469920fd6d2c7687f19081946f47684a423 ]
Set potentially uninitialized variables to 0. This is particularly
relevant when CONFIG_ACPI_PPTT is not set.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202301052307.JYt1GWaJ-lkp@intel.com/
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/all/Y86iruJPuwNN7rZw@kili/
Fixes: 5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230124154053.355376-2-pierre.gondois@arm.com
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5944ce092b97caed5d86d961e963b883b5c44ee2 ]
commit 3fcbf1c77d08 ("arch_topology: Fix cache attributes detection
in the CPU hotplug path")
adds a call to detect_cache_attributes() to populate the cacheinfo
before updating the siblings mask. detect_cache_attributes() allocates
memory and can take the PPTT mutex (on ACPI platforms). On PREEMPT_RT
kernels, on secondary CPUs, this triggers a:
'BUG: sleeping function called from invalid context' [1]
as the code is executed with preemption and interrupts disabled.
The primary CPU was previously storing the cache information using
the now removed (struct cpu_topology).llc_id:
commit 5b8dc787ce4a ("arch_topology: Drop LLC identifier stash from
the CPU topology")
allocate_cache_info() tries to build the cacheinfo from the primary
CPU prior secondary CPUs boot, if the DT/ACPI description
contains cache information.
If allocate_cache_info() fails, then fallback to the current state
for the cacheinfo allocation. [1] will be triggered in such case.
When unplugging a CPU, the cacheinfo memory cannot be freed. If it
was, then the memory would be allocated early by the re-plugged
CPU and would trigger [1].
Note that populate_cache_leaves() might be called multiple times
due to populate_leaves being moved up. This is required since
detect_cache_attributes() might be called with per_cpu_cacheinfo(cpu)
being allocated but not populated.
[1]:
| BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
| in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/111
| preempt_count: 1, expected: 0
| RCU nest depth: 1, expected: 1
| 3 locks held by swapper/111/0:
| #0: (&pcp->lock){+.+.}-{3:3}, at: get_page_from_freelist+0x218/0x12c8
| #1: (rcu_read_lock){....}-{1:3}, at: rt_spin_trylock+0x48/0xf0
| #2: (&zone->lock){+.+.}-{3:3}, at: rmqueue_bulk+0x64/0xa80
| irq event stamp: 0
| hardirqs last enabled at (0): 0x0
| hardirqs last disabled at (0): copy_process+0x5dc/0x1ab8
| softirqs last enabled at (0): copy_process+0x5dc/0x1ab8
| softirqs last disabled at (0): 0x0
| Preemption disabled at:
| migrate_enable+0x30/0x130
| CPU: 111 PID: 0 Comm: swapper/111 Tainted: G W 6.0.0-rc4-rt6-[...]
| Call trace:
| __kmalloc+0xbc/0x1e8
| detect_cache_attributes+0x2d4/0x5f0
| update_siblings_masks+0x30/0x368
| store_cpu_topology+0x78/0xb8
| secondary_start_kernel+0xd0/0x198
| __secondary_switched+0xb0/0xb4
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230104183033.755668-7-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit de0df442ee49cb1f6ee58f3fec5dcb5e5eb70aab ]
The DeviceTree Specification v0.3 specifies that the cache node
'[d-|i-|]cache-size' property is required. The 'cache-unified'
property is specifies whether the cache level is separate
or unified.
If the cache-size property is missing, no cache leaves is accounted.
This can lead to a 'BUG: KASAN: slab-out-of-bounds' [1] bug.
Check 'cache-unified' property and always account for at least
one cache leaf when parsing the device tree.
[1] https://lore.kernel.org/all/0f19cb3f-d6cf-4032-66d2-dedc9d09a0e3@linaro.org/
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230104183033.755668-4-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8844c3df001bc1d8397fddea341308da63855d53 ]
Make init_of_cache_level() return an error code when the cache
information parsing fails to help detecting missing information.
init_of_cache_level() is only called for riscv. Returning an error
code instead of 0 will prevent detect_cache_attributes() to allocate
memory if an incomplete DT is parsed.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230104183033.755668-3-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c3719bd9eeb2edf84bd263d662e36ca0ba262a23 ]
RISC-V's implementation of init_of_cache_level() is following
the Devicetree Specification v0.3 regarding caches, cf.:
- s3.7.3 'Internal (L1) Cache Properties'
- s3.8 'Multi-level and Shared Cache Nodes'
Allow reusing the implementation by moving it.
Also make 'levels', 'leaves' and 'level' unsigned int.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230104183033.755668-2-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 434f7349a1f00618a620b316f091bd13a12bc8d2 upstream.
Commit 4e65bda8273c ("ASoC: wcd934x: fix error handling in
wcd934x_codec_parse_data()") revealed the problem in the slimbus regmap.
That commit breaks audio playback, for instance, on sdm845 Thundercomm
Dragonboard 845c board:
Unable to handle kernel paging request at virtual address ffff8000847cbad4
...
CPU: 5 UID: 0 PID: 776 Comm: aplay Not tainted 6.18.0-rc1-00028-g7ea30958b305 #11 PREEMPT
Hardware name: Thundercomm Dragonboard 845c (DT)
...
Call trace:
slim_xfer_msg+0x24/0x1ac [slimbus] (P)
slim_read+0x48/0x74 [slimbus]
regmap_slimbus_read+0x18/0x24 [regmap_slimbus]
_regmap_raw_read+0xe8/0x174
_regmap_bus_read+0x44/0x80
_regmap_read+0x60/0xd8
_regmap_update_bits+0xf4/0x140
_regmap_select_page+0xa8/0x124
_regmap_raw_write_impl+0x3b8/0x65c
_regmap_bus_raw_write+0x60/0x80
_regmap_write+0x58/0xc0
regmap_write+0x4c/0x80
wcd934x_hw_params+0x494/0x8b8 [snd_soc_wcd934x]
snd_soc_dai_hw_params+0x3c/0x7c [snd_soc_core]
__soc_pcm_hw_params+0x22c/0x634 [snd_soc_core]
dpcm_be_dai_hw_params+0x1d4/0x38c [snd_soc_core]
dpcm_fe_dai_hw_params+0x9c/0x17c [snd_soc_core]
snd_pcm_hw_params+0x124/0x464 [snd_pcm]
snd_pcm_common_ioctl+0x110c/0x1820 [snd_pcm]
snd_pcm_ioctl+0x34/0x4c [snd_pcm]
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xec
el0t_64_sync_handler+0xa0/0xf0
el0t_64_sync+0x198/0x19c
The __devm_regmap_init_slimbus() started to be used instead of
__regmap_init_slimbus() after the commit mentioned above and turns out
the incorrect bus_context pointer (3rd argument) was used in
__devm_regmap_init_slimbus(). It should be just "slimbus" (which is equal
to &slimbus->dev). Correct it. The wcd934x codec seems to be the only or
the first user of devm_regmap_init_slimbus() but we should fix it till
the point where __devm_regmap_init_slimbus() was introduced therefore
two "Fixes" tags.
While at this, also correct the same argument in __regmap_init_slimbus().
Fixes: 4e65bda8273c ("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()")
Fixes: 7d6f7fb053ad ("regmap: add SLIMbus support")
Cc: stable@vger.kernel.org
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Ma Ke <make24@iscas.ac.cn>
Cc: Steev Klimaszewski <steev@kali.org>
Cc: Srinivas Kandagatla <srini@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251022201013.1740211-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a91c8096590bd7801a26454789f2992094fe36da ]
The original code causes a circular locking dependency found by lockdep.
======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 Tainted: G S U
------------------------------------------------------
xe_fault_inject/5091 is trying to acquire lock:
ffff888156815688 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}, at: __flush_work+0x25d/0x660
but task is already holding lock:
ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&devcd->mutex){+.+.}-{3:3}:
mutex_lock_nested+0x4e/0xc0
devcd_data_write+0x27/0x90
sysfs_kf_bin_write+0x80/0xf0
kernfs_fop_write_iter+0x169/0x220
vfs_write+0x293/0x560
ksys_write+0x72/0xf0
__x64_sys_write+0x19/0x30
x64_sys_call+0x2bf/0x2660
do_syscall_64+0x93/0xb60
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (kn->active#236){++++}-{0:0}:
kernfs_drain+0x1e2/0x200
__kernfs_remove+0xae/0x400
kernfs_remove_by_name_ns+0x5d/0xc0
remove_files+0x54/0x70
sysfs_remove_group+0x3d/0xa0
sysfs_remove_groups+0x2e/0x60
device_remove_attrs+0xc7/0x100
device_del+0x15d/0x3b0
devcd_del+0x19/0x30
process_one_work+0x22b/0x6f0
worker_thread+0x1e8/0x3d0
kthread+0x11c/0x250
ret_from_fork+0x26c/0x2e0
ret_from_fork_asm+0x1a/0x30
-> #0 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}:
__lock_acquire+0x1661/0x2860
lock_acquire+0xc4/0x2f0
__flush_work+0x27a/0x660
flush_delayed_work+0x5d/0xa0
dev_coredump_put+0x63/0xa0
xe_driver_devcoredump_fini+0x12/0x20 [xe]
devm_action_release+0x12/0x30
release_nodes+0x3a/0x120
devres_release_all+0x8a/0xd0
device_unbind_cleanup+0x12/0x80
device_release_driver_internal+0x23a/0x280
device_driver_detach+0x14/0x20
unbind_store+0xaf/0xc0
drv_attr_store+0x21/0x50
sysfs_kf_write+0x4a/0x80
kernfs_fop_write_iter+0x169/0x220
vfs_write+0x293/0x560
ksys_write+0x72/0xf0
__x64_sys_write+0x19/0x30
x64_sys_call+0x2bf/0x2660
do_syscall_64+0x93/0xb60
entry_SYSCALL_64_after_hwframe+0x76/0x7e
other info that might help us debug this:
Chain exists of: (work_completion)(&(&devcd->del_wk)->work) --> kn->active#236 --> &devcd->mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&devcd->mutex);
lock(kn->active#236);
lock(&devcd->mutex);
lock((work_completion)(&(&devcd->del_wk)->work));
*** DEADLOCK ***
5 locks held by xe_fault_inject/5091:
#0: ffff8881129f9488 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x72/0xf0
#1: ffff88810c755078 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x123/0x220
#2: ffff8881054811a0 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x55/0x280
#3: ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0
#4: ffffffff8359e020 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x72/0x660
stack backtrace:
CPU: 14 UID: 0 PID: 5091 Comm: xe_fault_inject Tainted: G S U 6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 PREEMPT_{RT,(lazy)}
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Micro-Star International Co., Ltd. MS-7D25/PRO Z690-A DDR4(MS-7D25), BIOS 1.10 12/13/2021
Call Trace:
<TASK>
dump_stack_lvl+0x91/0xf0
dump_stack+0x10/0x20
print_circular_bug+0x285/0x360
check_noncircular+0x135/0x150
? register_lock_class+0x48/0x4a0
__lock_acquire+0x1661/0x2860
lock_acquire+0xc4/0x2f0
? __flush_work+0x25d/0x660
? mark_held_locks+0x46/0x90
? __flush_work+0x25d/0x660
__flush_work+0x27a/0x660
? __flush_work+0x25d/0x660
? trace_hardirqs_on+0x1e/0xd0
? __pfx_wq_barrier_func+0x10/0x10
flush_delayed_work+0x5d/0xa0
dev_coredump_put+0x63/0xa0
xe_driver_devcoredump_fini+0x12/0x20 [xe]
devm_action_release+0x12/0x30
release_nodes+0x3a/0x120
devres_release_all+0x8a/0xd0
device_unbind_cleanup+0x12/0x80
device_release_driver_internal+0x23a/0x280
? bus_find_device+0xa8/0xe0
device_driver_detach+0x14/0x20
unbind_store+0xaf/0xc0
drv_attr_store+0x21/0x50
sysfs_kf_write+0x4a/0x80
kernfs_fop_write_iter+0x169/0x220
vfs_write+0x293/0x560
ksys_write+0x72/0xf0
__x64_sys_write+0x19/0x30
x64_sys_call+0x2bf/0x2660
do_syscall_64+0x93/0xb60
? __f_unlock_pos+0x15/0x20
? __x64_sys_getdents64+0x9b/0x130
? __pfx_filldir64+0x10/0x10
? do_syscall_64+0x1a2/0xb60
? clear_bhb_loop+0x30/0x80
? clear_bhb_loop+0x30/0x80
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x76e292edd574
Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89
RSP: 002b:00007fffe247a828 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000076e292edd574
RDX: 000000000000000c RSI: 00006267f6306063 RDI: 000000000000000b
RBP: 000000000000000c R08: 000076e292fc4b20 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00006267f6306063
R13: 000000000000000b R14: 00006267e6859c00 R15: 000076e29322a000
</TASK>
xe 0000:03:00.0: [drm] Xe device coredump has been deleted.
Fixes: 01daccf74832 ("devcoredump : Serialize devcd_del work")
Cc: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Cc: Matthew Brost <matthew.brost@intel.com>
Acked-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250723142416.1020423-1-dev@lankhorst.se
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ replaced disable_delayed_work_sync() with cancel_delayed_work_sync() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2eead19334516c8e9927c11b448fbe512b1f18a1 ]
Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity()
which causes the code to proceed with NULL clock pointers. The current
logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both
valid pointers and NULL, leading to potential NULL pointer dereference
in clk_get_rate().
Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns:
"The error code within @ptr if it is an error pointer; 0 otherwise."
This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL
pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed)
when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be
called when of_clk_get() returns NULL.
Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid
pointers, preventing potential NULL pointer dereference in clk_get_rate().
Cc: stable <stable@kernel.org>
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes: b8fe128dad8f ("arch_topology: Adjust initial CPU capacities with current freq")
Link: https://patch.msgid.link/20250923174308.1771906-1-kaushlendra.kumar@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 73db799bf5efc5a04654bb3ff6c9bf63a0dfa473 ]
Add `devm_pm_runtime_set_active_enabled()` and
`devm_pm_runtime_get_noresume()` for simplifying
common cases in drivers.
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250327195928.680771-3-csokas.bence@prolan.hu
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 0792c1984a45 ("iio: imu: inv_icm42600: Simplify pm_runtime setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0efdedfa537eb534c251a5b4794caaf72cc55869 ]
When device_register() fails in register_node(), it calls
put_device(&node->dev). This triggers node_device_release(), which calls
kfree(to_node(dev)), thereby freeing the entire node structure.
As a result, when register_node() returns an error, the node memory has
already been freed. Calling kfree(node) again in register_one_node()
leads to a double free.
This patch removes the redundant kfree(node) from register_one_node() to
prevent the double free.
Link: https://lkml.kernel.org/r/20250918054144.58980-1-donettom@linux.ibm.com
Fixes: 786eb990cfb7 ("drivers/base/node: handle error properly in register_one_node()")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Chris Mason <clm@meta.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 786eb990cfb78aab94eb74fb32a030e14723a620 ]
If register_node() returns an error, it is not handled correctly.
The function will proceed further and try to register CPUs under the
node, which is not correct.
So, in this patch, if register_node() returns an error, we return
immediately from the function.
Link: https://lkml.kernel.org/r/20250822084845.19219-1-donettom@linux.ibm.com
Fixes: 76b67ed9dce6 ("[PATCH] node hotplug: register cpu: remove node struct")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be82483d1b60baf6747884bd74cb7de484deaf76 ]
If system suspend is aborted in the "noirq" phase (for instance, due to
an error returned by one of the device callbacks), power.is_noirq_suspended
will not be set for some devices and device_resume_noirq() will return
early for them. Consequently, noirq resume callbacks will not run for
them at all because the noirq suspend callbacks have not run for them
yet.
If any of them has power.must_resume set and late suspend has been
skipped for it (due to power.smart_suspend), early resume should be
skipped for it either, or its state may become inconsistent (for
instance, if the early resume assumes that it will always follow
noirq resume).
Make that happen by clearing power.must_resume in device_resume_noirq()
for devices with power.is_noirq_suspended clear that have been left in
suspend by device_suspend_late(), which will subsequently cause
device_resume_early() to leave the device in suspend and avoid
changing its state.
Fixes: 0d4b54c6fee8 ("PM / core: Add LEAVE_SUSPENDED driver flag")
Link: https://lore.kernel.org/linux-pm/5d692b81-6f58-4e86-9cb0-ede69a09d799@rowland.harvard.edu/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3381776.aeNJFYEL58@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5c36b86d2bf68fbcad16169983ef7ee8c537db59 ]
The first thing __regmap_init() do is check if config is non-NULL,
so there is no need to check for this again later.
Fixes: d77e745613680c54 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/a154d9db0f290dda96b48bd817eb743773e846e1.1755090330.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Commit 556c1ad666ad90c50ec8fccb930dd5046cfbecfb upstream.
Enable the previously added mitigation for VMscape. Add the cmdline
vmscape={off|ibpb|force} and sysfs reporting.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 89d9cec3b1e9c49bae9375a2db6dc49bc7468af0 ]
Clear power.needs_force_resume in pm_runtime_reinit() in case it has
been set by pm_runtime_force_suspend() invoked from a driver remove
callback.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/9495163.CDJkKcVGEf@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c871c199accb39d0f4cb941ad0dccabfc21e9214 ]
When __regmap_init() is called from __regmap_init_i2c() and
__regmap_init_spi() (and their devm versions), the bus argument
obtained from regmap_get_i2c_bus() and regmap_get_spi_bus(), may be
allocated using kmemdup() to support quirks. In those cases, the
bus->free_on_exit field is set to true.
However, inside __regmap_init(), buf is not freed on any error path.
This could lead to a memory leak of regmap_bus when __regmap_init()
fails. Fix that by freeing bus on error path when free_on_exit is set.
Fixes: ea030ca68819 ("regmap-i2c: Set regmap max raw r/w from quirks")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Link: https://patch.msgid.link/20250626172823.18725-1-abdun.nihaal@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 500ba33284416255b9a5b50ace24470b6fe77ea5 upstream.
pm_domain_cpu_gov is selecting a cluster idle state but does not consider
latency tolerance of child CPUs. This results in deeper cluster idle state
whose latency does not meet latency tolerance requirement.
Select deeper idle state only if global and device latency tolerance of all
child CPUs meet.
Test results on SM8750 with 300 usec PM-QoS on CPU0 which is less than
domain idle state entry (2150) + exit (1983) usec latency mentioned in
devicetree, demonstrate the issue.
# echo 300 > /sys/devices/system/cpu/cpu0/power/pm_qos_resume_latency_us
Before: (Usage is incrementing)
======
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 29817 537 8 270 0
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 30348 542 8 271 0
After: (Usage is not incrementing due to latency tolerance)
======
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 39319 626 14 307 0
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 39319 626 14 307 0
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Fixes: e94999688e3a ("PM / Domains: Add genpd governor for CPUs")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250709-pmdomain_qos-v2-1-976b12257899@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d8010d4ba43e9f790925375a7de100604a5e2dba upstream.
Add the required features detection glue to bugs.c et all in order to
support the TSA mitigation.
Co-developed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 31e4e12e0e9609850cefd4b2e1adf782f56337d6 ]
software_node_get_reference_args() wants to get @index-th element, so
the property value requires at least '(index + 1) * sizeof(*ref)' bytes
but that can not be guaranteed by current OOB check, and may cause OOB
for malformed property.
Fix by using as OOB check '((index + 1) * sizeof(*ref) > prop->length)'.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250414-fix_swnode-v2-1-9c9e6ae11eab@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 40d3b40dce375d6f1c1dbf08d79eed3aed6c691d ]
pm_runtime_put_autosuspend() schedules a hrtimer to expire
at "dev->power.timer_expires". If the hrtimer's callback,
pm_suspend_timer_fn(), observes that the current time equals
"dev->power.timer_expires", it unexpectedly bails out instead of
proceeding with runtime suspend.
pm_suspend_timer_fn():
if (expires > 0 && expires < ktime_get_mono_fast_ns()) {
dev->power.timer_expires = 0;
rpm_suspend(..)
}
Additionally, as ->timer_expires is not cleared, all the future auto
suspend requests will not schedule hrtimer to perform auto suspend.
rpm_suspend():
if ((rpmflags & RPM_AUTO) &&...) {
if (!(dev->power.timer_expires && ...) { <-- this will fail.
hrtimer_start_range_ns(&dev->power.suspend_timer,...);
}
}
Fix this by as well checking if current time reaches the set expiration.
Co-developed-by: Patrick Daly <quic_pdaly@quicinc.com>
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Link: https://patch.msgid.link/20250515064125.1211561-1-quic_charante@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0f5757667ec0aaf2456c3b76fcf0c6c3ea3591fe ]
The error checking for of_count_phandle_with_args() does not handle
negative error codes correctly. The problem is that "index" is a u32 so
in the condition "if (index >= num_domains)" negative error codes stored
in "num_domains" are type promoted to very high positive values and
"index" is always going to be valid.
Test for negative error codes first and then test if "index" is valid.
Fixes: 3ccf3f0cd197 ("PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBxPQ8AI8N5v-7rL@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d46c4c839c20a599a0eb8d73708ce401f9c7d06d ]
Commit 03f1444016b7 ("PM: sleep: Fix handling devices with direct_complete
set on errors") caused power.is_suspended to be set for devices with
power.direct_complete set, but it forgot to ensure the clearing of that
flag for them in device_resume(), so power.is_suspended is still set for
them during the next system suspend-resume cycle.
If that cycle is aborted in dpm_suspend(), the subsequent invocation of
dpm_resume() will trigger a device_resume() call for every device and
because power.is_suspended is set for the devices in question, they will
not be skipped by device_resume() as expected which causes scary error
messages to be logged (as appropriate).
To address this issue, move the clearing of power.is_suspended in
device_resume() immediately after the power.is_suspended check so it
will be always cleared for all devices processed by that function.
Fixes: 03f1444016b7 ("PM: sleep: Fix handling devices with direct_complete set on errors")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4280
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/4990586.GXAFRqVoOG@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f4818881c47fd91fcb6d62373c57c7844e3de1c0 upstream.
Indirect Target Selection (ITS) is a bug in some pre-ADL Intel CPUs with
eIBRS. It affects prediction of indirect branch and RETs in the
lower half of cacheline. Due to ITS such branches may get wrongly predicted
to a target of (direct or indirect) branch that is located in the upper
half of the cacheline.
Scope of impact
===============
Guest/host isolation
--------------------
When eIBRS is used for guest/host isolation, the indirect branches in the
VMM may still be predicted with targets corresponding to branches in the
guest.
Intra-mode
----------
cBPF or other native gadgets can be used for intra-mode training and
disclosure using ITS.
User/kernel isolation
---------------------
When eIBRS is enabled user/kernel isolation is not impacted.
Indirect Branch Prediction Barrier (IBPB)
-----------------------------------------
After an IBPB, indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB. This is
mitigated by a microcode update.
Add cmdline parameter indirect_target_selection=off|on|force to control the
mitigation to relocate the affected branches to an ITS-safe thunk i.e.
located in the upper half of cacheline. Also add the sysfs reporting.
When retpoline mitigation is deployed, ITS safe-thunks are not needed,
because retpoline sequence is already ITS-safe. Similarly, when call depth
tracking (CDT) mitigation is deployed (retbleed=stuff), ITS safe return
thunk is not used, as CDT prevents RSB-underflow.
To not overcomplicate things, ITS mitigation is not supported with
spectre-v2 lfence;jmp mitigation. Moreover, it is less practical to deploy
lfence;jmp mitigation on ITS affected parts anyways.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8e1ddfada4530939a8cb64ee9251aef780474274 ]
When releasing a device, if the release action causes a group to be
released, a warning is emitted because it can't find the group. This
happens because devres_release_all() moves the entire list to a todo
list and also move the group markers. Considering r* normal resource
nodes and g1 a group resource node:
g1 -----------.
v v
r1 -> r2 -> g1[0] -> r3-> g[1] -> r4
After devres_release_all(), dev->devres_head becomes empty and the todo
list it iterates on becomes:
g1
v
r1 -> r2 -> r3-> r4 -> g1[0]
When a call to component_del() is made and takes down the aggregate
device, a warning like this happen:
RIP: 0010:devres_release_group+0x362/0x530
...
Call Trace:
<TASK>
component_unbind+0x156/0x380
component_unbind_all+0x1d0/0x270
mei_component_master_unbind+0x28/0x80 [mei_hdcp]
take_down_aggregate_device+0xc1/0x160
component_del+0x1c6/0x3e0
intel_hdcp_component_fini+0xf1/0x170 [xe]
xe_display_fini+0x1e/0x40 [xe]
Because the devres group corresponding to the hdcp component cannot be
found. Just ignore this corner case: if the dev->devres_head is empty
and the caller is trying to remove a group, it's likely in the process
of device cleanup so just ignore it instead of warning.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250222001051.3012936-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03f1444016b71feffa1dfb8a51f15ba592f94b13 ]
When dpm_suspend() fails, some devices with power.direct_complete set
may not have been handled by device_suspend() yet, so runtime PM has
not been disabled for them yet even though power.direct_complete is set.
Since device_resume() expects that runtime PM has been disabled for all
devices with power.direct_complete set, it will attempt to reenable
runtime PM for the devices that have not been processed by device_suspend()
which does not make sense. Had those devices had runtime PM disabled
before device_suspend() had run, device_resume() would have inadvertently
enable runtime PM for them, but this is not expected to happen because
it would require ->prepare() callbacks to return positive values for
devices with runtime PM disabled, which would be invalid.
In practice, this issue is most likely benign because pm_runtime_enable()
will not allow the "disable depth" counter to underflow, but it causes a
warning message to be printed for each affected device.
To allow device_resume() to distinguish the "direct complete" devices
that have been processed by device_suspend() from those which have not
been handled by it, make device_suspend() set power.is_suspended for
"direct complete" devices.
Next, move the power.is_suspended check in device_resume() before the
power.direct_complete check in it to make it skip the "direct complete"
devices that have not been handled by device_suspend().
This change is based on a preliminary patch from Saravana Kannan.
Fixes: aae4518b3124 ("PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily")
Link: https://lore.kernel.org/linux-pm/20241114220921.2529905-2-saravanak@google.com/
Reported-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://patch.msgid.link/12627587.O9o76ZdvQC@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eeb87d17aceab7803a5a5bcb6cf2817b745157cf ]
The check before setting power.must_resume in device_suspend_noirq()
does not take power.child_count into account, but it should do that, so
use pm_runtime_need_not_resume() in it for this purpose and adjust the
comment next to it accordingly.
Fixes: 107d47b2b95e ("PM: sleep: core: Simplify the SMART_SUSPEND flag handling")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3353728.44csPzL39Z@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 78eb41f518f414378643ab022241df2a9dcd008b upstream.
Commit bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize
cycle detection logic") introduced a new struct device *con_dev and a
get_dev_from_fwnode() call to get it, but without adding a corresponding
put_device().
Closes: https://lore.kernel.org/all/20241204124826.2e055091@booty/
Fixes: bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize cycle detection logic")
Cc: stable@vger.kernel.org
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250213-fix__fw_devlink_relax_cycles_missing_device_put-v2-1-8cd3b03e6a3f@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 32ffed055dcee17f6705f545b069e44a66067808 upstream.
Add kfree() for "d->main_status_buf" to the error-handling path to prevent
a memory leak.
Fixes: a2d21848d921 ("regmap: regmap-irq: Add main status register support")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://patch.msgid.link/20250205004343.14413-1-jiashengjiangcool@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3061e170381af96d1e66799d34264e6414d428a7 upstream.
At the end of __regmap_init(), if dev is not NULL, regmap_attach_dev()
is called, which adds a devres reference to the regmap, to be able to
retrieve a dev's regmap by name using dev_get_regmap().
When calling regmap_exit, the opposite does not happen, and the
reference is kept until the dev is detached.
Add a regmap_detach_dev() function and call it in regmap_exit() to make
sure that the devres reference is not kept.
Cc: stable@vger.kernel.org
Fixes: 72b39f6f2b5a ("regmap: Implement dev_get_regmap()")
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Rule: add
Link: https://lore.kernel.org/stable/20241128130554.362486-1-demonsingur%40gmail.com
Link: https://patch.msgid.link/20241128131625.363835-1-demonsingur@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250115033244.2540522-1-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 48dc44f3c1afa29390cb2fbc8badad1b1111cea4 which is
commit 3061e170381af96d1e66799d34264e6414d428a7 upstream.
It was backported incorrectly, a fixed version will be applied later.
Cc: Cosmin Tanislav <demonsingur@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250115033244.2540522-1-tzungbi@kernel.org
Reported-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cbd399f78e23ad4492c174fc5e6b3676dba74a52 upstream.
During fuzz testing, the following warning was discovered:
different return values (15 and 11) from vsnprintf("%*pbl
", ...)
test:keyward is WARNING in kvasprintf
WARNING: CPU: 55 PID: 1168477 at lib/kasprintf.c:30 kvasprintf+0x121/0x130
Call Trace:
kvasprintf+0x121/0x130
kasprintf+0xa6/0xe0
bitmap_print_to_buf+0x89/0x100
core_siblings_list_read+0x7e/0xb0
kernfs_file_read_iter+0x15b/0x270
new_sync_read+0x153/0x260
vfs_read+0x215/0x290
ksys_read+0xb9/0x160
do_syscall_64+0x56/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
The call trace shows that kvasprintf() reported this warning during the
printing of core_siblings_list. kvasprintf() has several steps:
(1) First, calculate the length of the resulting formatted string.
(2) Allocate a buffer based on the returned length.
(3) Then, perform the actual string formatting.
(4) Check whether the lengths of the formatted strings returned in
steps (1) and (2) are consistent.
If the core_cpumask is modified between steps (1) and (3), the lengths
obtained in these two steps may not match. Indeed our test includes cpu
hotplugging, which should modify core_cpumask while printing.
To fix this issue, cache the cpumask into a temporary variable before
calling cpumap_print_{list, cpumask}_to_buf(), to keep it unchanged
during the printing process.
Fixes: bb9ec13d156e ("topology: use bin_attribute to break the size limitation of cpumap ABI")
Cc: stable <stable@kernel.org>
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20241114110141.94725-1-lihuafei1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b8f7bbd1f4ecff6d6277b8c454f62bb0a1c6dbe4 ]
When removing a genpd we don't clean up the genpd->dev correctly. Let's add
the missing put_device() in genpd_free_data() to fix this.
Fixes: 401ea1572de9 ("PM / Domain: Add struct device to genpd")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Message-ID: <20241122134207.157283-2-ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3f1aa0c533d9dd8a835caf9a6824449c463ee7e2 ]
The register addresses are unsigned ints so we should use %u not %d to
log them.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20241127-regmap-test-high-addr-v1-1-74a48a9e0dc5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3061e170381af96d1e66799d34264e6414d428a7 upstream.
At the end of __regmap_init(), if dev is not NULL, regmap_attach_dev()
is called, which adds a devres reference to the regmap, to be able to
retrieve a dev's regmap by name using dev_get_regmap().
When calling regmap_exit, the opposite does not happen, and the
reference is kept until the dev is detached.
Add a regmap_detach_dev() function and call it in regmap_exit() to make
sure that the devres reference is not kept.
Cc: stable@vger.kernel.org
Fixes: 72b39f6f2b5a ("regmap: Implement dev_get_regmap()")
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Rule: add
Link: https://lore.kernel.org/stable/20241128130554.362486-1-demonsingur%40gmail.com
Link: https://patch.msgid.link/20241128131625.363835-1-demonsingur@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7952cd2b8213f20a1752634c25dfd215da537722 ]
The device parameter is not altered in the device child node APIs,
constify them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20221004092129.19412-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 73b03b27736e ("leds: flash: mt6360: Fix device_for_each_child_node() refcounting in error paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bac3b10b78e54b7da3cede397258f75a2180609b ]
In attempting to optimize fw_devlink runtime, I introduced numerous cycle
detection bugs by foregoing cycle detection logic under specific
conditions. Each fix has further narrowed the conditions for optimization.
It's time to give up on these optimization attempts and just run the cycle
detection logic every time fw_devlink tries to create a device link.
The specific bug report that triggered this fix involved a supplier fwnode
that never gets a device created for it. Instead, the supplier fwnode is
represented by the device that corresponds to an ancestor fwnode.
In this case, fw_devlink didn't do any cycle detection because the cycle
detection logic is only run when a device link is created between the
devices that correspond to the actual consumer and supplier fwnodes.
With this change, fw_devlink will run cycle detection logic even when
creating SYNC_STATE_ONLY proxy device links from a device that is an
ancestor of a consumer fwnode.
Reported-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Closes: https://lore.kernel.org/all/1a1ab663-d068-40fb-8c94-f0715403d276@ideasonboard.com/
Fixes: 6442d79d880c ("driver core: fw_devlink: Improve detection of overlapping cycles")
Cc: stable <stable@kernel.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20241030171009.1853340-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b7e1241d8f77ed64404a5e4450f43a319310fc91 ]
A fwnode link between specific supplier-consumer fwnodes can be added
multiple times for multiple reasons. If that dependency doesn't exist,
deleting the fwnode link once doesn't guarantee that it won't get created
again.
So, add FWLINK_FLAG_IGNORE flag to mark a fwnode link as one that needs to
be completely ignored. Since a fwnode link's flags is an OR of all the
flags passed to all the fwnode_link_add() calls to create that specific
fwnode link, the FWLINK_FLAG_IGNORE flag is preserved and can be used to
mark a fwnode link as on that need to be completely ignored until it is
deleted.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240305050458.1400667-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize cycle detection logic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6e7ad1aebb4fc9fed0217dd50ef6e58a53f17d81 ]
The links in a cycle are not all logged in a consistent manner or not
logged at all. Make them consistent by adding a "cycle:" string and log all
the link in the cycles (even the child ==> parent dependency) so that it's
easier to debug cycle detection code. Also, mark the start and end of a
cycle so it's easy to tell when multiple cycles are logged back to back.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240202095636.868578-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize cycle detection logic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit bfa54a793ba77ef696755b66f3ac4ed00c7d1248 upstream.
For bus_register(), any error which happens after kset_register() will
cause that @priv are freed twice, fixed by setting @priv with NULL after
the first free.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20240727-bus_register_fix-v1-1-fed8dd0dba7a@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Brennan : Backport requires bus->p = NULL instead of priv = NULL ]
Signed-off-by: Brennan Lamoreaux <brennan.lamoreaux@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 953e549471cabc9d4980f1da2e9fa79f4c23da06 ]
Lockdep gives a false positive splat as it can't distinguish the lock
which is taken by different IRQ descriptors from different IRQ chips
that are organized in a way of a hierarchy:
======================================================
WARNING: possible circular locking dependency detected
6.12.0-rc5-next-20241101-00148-g9fabf8160b53 #562 Tainted: G W
------------------------------------------------------
modprobe/141 is trying to acquire lock:
ffff899446947868 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}, at: regmap_update_bits_base+0x33/0x90
but task is already holding lock:
ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790
which lock already depends on the new lock.
-> #3 (&d->lock){+.+.}-{4:4}:
-> #2 (&desc->request_mutex){+.+.}-{4:4}:
-> #1 (ipclock){+.+.}-{4:4}:
-> #0 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}:
Chain exists of:
intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock --> &desc->request_mutex --> &d->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&d->lock);
lock(&desc->request_mutex);
lock(&d->lock);
lock(intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock);
*** DEADLOCK ***
3 locks held by modprobe/141:
#0: ffff8994419368f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xf6/0x250
#1: ffff89944690b250 (&desc->request_mutex){+.+.}-{4:4}, at: __setup_irq+0x1a2/0x790
#2: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790
Set a lockdep class when we map the IRQ so that it doesn't warn about
a lockdep bug that doesn't exist.
Fixes: 4af8be67fd99 ("regmap: Convert regmap_irq to use irq_domain")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241101165553.4055617-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9a71892cbcdb9d1459c84f5a4c722b14354158a5 upstream.
This reverts commit 15fffc6a5624b13b428bb1c6e9088e32a55eb82c.
This commit causes a regression, so revert it for now until it can come
back in a way that works for everyone.
Link: https://lore.kernel.org/all/172790598832.1168608.4519484276671503678.stgit@dwillia2-xfh.jf.intel.com/
Fixes: 15fffc6a5624 ("driver core: Fix uevent_show() vs driver detach race")
Cc: stable <stable@kernel.org>
Cc: Ashish Sangwan <a.sangwan@samsung.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Dirk Behme <dirk.behme@de.bosch.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c0fd973c108cdc22a384854bc4b3e288a9717bb2 ]
Return -EIO instead of 0 for below erroneous bus attribute operations:
- read a bus attribute without show().
- write a bus attribute without store().
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20240724-bus_fix-v2-1-5adbafc698fb@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f0e5311aa8022107d63c54e2f03684ec097d1394 upstream.
Most firmware names are hardcoded strings, or are constructed from fairly
constrained format strings where the dynamic parts are just some hex
numbers or such.
However, there are a couple codepaths in the kernel where firmware file
names contain string components that are passed through from a device or
semi-privileged userspace; the ones I could find (not counting interfaces
that require root privileges) are:
- lpfc_sli4_request_firmware_update() seems to construct the firmware
filename from "ModelName", a string that was previously parsed out of
some descriptor ("Vital Product Data") in lpfc_fill_vpd()
- nfp_net_fw_find() seems to construct a firmware filename from a model
name coming from nfp_hwinfo_lookup(pf->hwinfo, "nffw.partno"), which I
think parses some descriptor that was read from the device.
(But this case likely isn't exploitable because the format string looks
like "netronome/nic_%s", and there shouldn't be any *folders* starting
with "netronome/nic_". The previous case was different because there,
the "%s" is *at the start* of the format string.)
- module_flash_fw_schedule() is reachable from the
ETHTOOL_MSG_MODULE_FW_FLASH_ACT netlink command, which is marked as
GENL_UNS_ADMIN_PERM (meaning CAP_NET_ADMIN inside a user namespace is
enough to pass the privilege check), and takes a userspace-provided
firmware name.
(But I think to reach this case, you need to have CAP_NET_ADMIN over a
network namespace that a special kind of ethernet device is mapped into,
so I think this is not a viable attack path in practice.)
Fix it by rejecting any firmware names containing ".." path components.
For what it's worth, I went looking and haven't found any USB device
drivers that use the firmware loader dangerously.
Cc: stable@vger.kernel.org
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Fixes: abb139e75c2c ("firmware: teach the kernel to load firmware files directly from the filesystem")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240828-firmware-traversal-v3-1-c76529c63b5f@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 692c20c4d075bd452acfbbc68200fc226c7c9496 ]
The inter-column space in the debug summary is two spaces. However, in
one case, the extra space is handled implicitly in a field width
specifier. Make inter-column space explicit to ease future maintenance.
Fixes: 45fbc464b047 ("PM: domains: Add "performance" column to debug summary")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ae61eb363621b981edde878e1e74d701702a579f.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 56a20ad349b5c51909cf8810f7c79b288864ad33 ]
Initialize an uninitialized struct member for driver API
devres_open_group().
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/1719931914-19035-4-git-send-email-quic_zijuhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4ea1d504d2701ba04412f98dc00d45a104c52ab ]
If we ever meet a hardware that uses weird register bits and padding,
we may end up in off-by-one error since x/8 + y/8 might not be equal
to (x + y)/8 in some cases.
bits pad x/8+y/8 (x+y)/8
4..7 0..3 0 0 // x + y from 4 up to 7
4..7 4..7 0 1 // x + y from 8 up to 11
4..7 8..11 1 1 // x + y from 12 up to 15
8..15 0..7 1 1 // x + y from 8 up to 15
8..15 8..15 2 2 // x + y from 16 up to 23
Fix this by using (x+y)/8.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://msgid.link/r/20240605205315.19132-1-andy.shevchenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
