| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 359afc8eb02a518fbdd0cbd462c8c2827c6cbec2 upstream.
Commit 89d9cec3b1e9 ("PM: runtime: Clear power.needs_force_resume in
pm_runtime_reinit()") added provisional clearing of power.needs_force_resume
to pm_runtime_reinit(), but it is done unconditionally which is a
mistake because pm_runtime_reinit() may race with driver probing
and removal [1].
To address this, notice that power.needs_force_resume should never
be set when runtime PM is enabled and so it only needs to be cleared
when runtime PM is disabled, and update pm_runtime_init() to only
clear that flag when runtime PM is disabled.
Fixes: 89d9cec3b1e9 ("PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()")
Reported-by: Ed Tsai <ed.tsai@mediatek.com>
Closes: https://lore.kernel.org/linux-pm/20251215122154.3180001-1-ed.tsai@mediatek.com/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 6.17+ <stable@vger.kernel.org> # 6.17+
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12807571.O9o76ZdvQC@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 73db799bf5efc5a04654bb3ff6c9bf63a0dfa473 ]
Add `devm_pm_runtime_set_active_enabled()` and
`devm_pm_runtime_get_noresume()` for simplifying
common cases in drivers.
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250327195928.680771-3-csokas.bence@prolan.hu
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 0792c1984a45 ("iio: imu: inv_icm42600: Simplify pm_runtime setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit be82483d1b60baf6747884bd74cb7de484deaf76 ]
If system suspend is aborted in the "noirq" phase (for instance, due to
an error returned by one of the device callbacks), power.is_noirq_suspended
will not be set for some devices and device_resume_noirq() will return
early for them. Consequently, noirq resume callbacks will not run for
them at all because the noirq suspend callbacks have not run for them
yet.
If any of them has power.must_resume set and late suspend has been
skipped for it (due to power.smart_suspend), early resume should be
skipped for it either, or its state may become inconsistent (for
instance, if the early resume assumes that it will always follow
noirq resume).
Make that happen by clearing power.must_resume in device_resume_noirq()
for devices with power.is_noirq_suspended clear that have been left in
suspend by device_suspend_late(), which will subsequently cause
device_resume_early() to leave the device in suspend and avoid
changing its state.
Fixes: 0d4b54c6fee8 ("PM / core: Add LEAVE_SUSPENDED driver flag")
Link: https://lore.kernel.org/linux-pm/5d692b81-6f58-4e86-9cb0-ede69a09d799@rowland.harvard.edu/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3381776.aeNJFYEL58@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 51888393cc64dd0462d0b96c13ab94873abbc030 ]
For all practical purposes, there is no difference between the situation
in which a given device is not ignoring children and its active child
count is nonzero and the situation in which its runtime PM usage counter
is nonzero. However, pm_runtime_get_if_in_use() will only increment the
device's usage counter and return 1 in the latter case.
For consistency, make it do so in the former case either by adjusting
pm_runtime_get_conditional() and update the related kerneldoc comments
accordingly.
Fixes: c111566bea7c ("PM: runtime: Add pm_runtime_get_if_active()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+: c0ef3df8dbae: PM: runtime: Simplify pm_runtime_get_if_active() usage
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Link: https://patch.msgid.link/12700973.O9o76ZdvQC@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c0ef3df8dbaef51ee4cfd58a471adf2eaee6f6b3 ]
There are two ways to opportunistically increment a device's runtime PM
usage count, calling either pm_runtime_get_if_active() or
pm_runtime_get_if_in_use(). The former has an argument to tell whether to
ignore the usage count or not, and the latter simply calls the former with
ign_usage_count set to false. The other users that want to ignore the
usage_count will have to explicitly set that argument to true which is a
bit cumbersome.
To make this function more practical to use, remove the ign_usage_count
argument from the function. The main implementation is in a static
function called pm_runtime_get_conditional() and implementations of
pm_runtime_get_if_active() and pm_runtime_get_if_in_use() are moved to
runtime.c.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Takashi Iwai <tiwai@suse.de> # sound/
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> # drivers/accel/ivpu/
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # drivers/gpu/drm/i915/
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ Removed changes to code that didn't exist in older trees ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 89d9cec3b1e9c49bae9375a2db6dc49bc7468af0 ]
Clear power.needs_force_resume in pm_runtime_reinit() in case it has
been set by pm_runtime_force_suspend() invoked from a driver remove
callback.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/9495163.CDJkKcVGEf@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 500ba33284416255b9a5b50ace24470b6fe77ea5 upstream.
pm_domain_cpu_gov is selecting a cluster idle state but does not consider
latency tolerance of child CPUs. This results in deeper cluster idle state
whose latency does not meet latency tolerance requirement.
Select deeper idle state only if global and device latency tolerance of all
child CPUs meet.
Test results on SM8750 with 300 usec PM-QoS on CPU0 which is less than
domain idle state entry (2150) + exit (1983) usec latency mentioned in
devicetree, demonstrate the issue.
# echo 300 > /sys/devices/system/cpu/cpu0/power/pm_qos_resume_latency_us
Before: (Usage is incrementing)
======
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 29817 537 8 270 0
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 30348 542 8 271 0
After: (Usage is not incrementing due to latency tolerance)
======
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 39319 626 14 307 0
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 39319 626 14 307 0
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Fixes: e94999688e3a ("PM / Domains: Add genpd governor for CPUs")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250709-pmdomain_qos-v2-1-976b12257899@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 40d3b40dce375d6f1c1dbf08d79eed3aed6c691d ]
pm_runtime_put_autosuspend() schedules a hrtimer to expire
at "dev->power.timer_expires". If the hrtimer's callback,
pm_suspend_timer_fn(), observes that the current time equals
"dev->power.timer_expires", it unexpectedly bails out instead of
proceeding with runtime suspend.
pm_suspend_timer_fn():
if (expires > 0 && expires < ktime_get_mono_fast_ns()) {
dev->power.timer_expires = 0;
rpm_suspend(..)
}
Additionally, as ->timer_expires is not cleared, all the future auto
suspend requests will not schedule hrtimer to perform auto suspend.
rpm_suspend():
if ((rpmflags & RPM_AUTO) &&...) {
if (!(dev->power.timer_expires && ...) { <-- this will fail.
hrtimer_start_range_ns(&dev->power.suspend_timer,...);
}
}
Fix this by as well checking if current time reaches the set expiration.
Co-developed-by: Patrick Daly <quic_pdaly@quicinc.com>
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Link: https://patch.msgid.link/20250515064125.1211561-1-quic_charante@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0f5757667ec0aaf2456c3b76fcf0c6c3ea3591fe ]
The error checking for of_count_phandle_with_args() does not handle
negative error codes correctly. The problem is that "index" is a u32 so
in the condition "if (index >= num_domains)" negative error codes stored
in "num_domains" are type promoted to very high positive values and
"index" is always going to be valid.
Test for negative error codes first and then test if "index" is valid.
Fixes: 3ccf3f0cd197 ("PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBxPQ8AI8N5v-7rL@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d46c4c839c20a599a0eb8d73708ce401f9c7d06d ]
Commit 03f1444016b7 ("PM: sleep: Fix handling devices with direct_complete
set on errors") caused power.is_suspended to be set for devices with
power.direct_complete set, but it forgot to ensure the clearing of that
flag for them in device_resume(), so power.is_suspended is still set for
them during the next system suspend-resume cycle.
If that cycle is aborted in dpm_suspend(), the subsequent invocation of
dpm_resume() will trigger a device_resume() call for every device and
because power.is_suspended is set for the devices in question, they will
not be skipped by device_resume() as expected which causes scary error
messages to be logged (as appropriate).
To address this issue, move the clearing of power.is_suspended in
device_resume() immediately after the power.is_suspended check so it
will be always cleared for all devices processed by that function.
Fixes: 03f1444016b7 ("PM: sleep: Fix handling devices with direct_complete set on errors")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4280
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/4990586.GXAFRqVoOG@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03f1444016b71feffa1dfb8a51f15ba592f94b13 ]
When dpm_suspend() fails, some devices with power.direct_complete set
may not have been handled by device_suspend() yet, so runtime PM has
not been disabled for them yet even though power.direct_complete is set.
Since device_resume() expects that runtime PM has been disabled for all
devices with power.direct_complete set, it will attempt to reenable
runtime PM for the devices that have not been processed by device_suspend()
which does not make sense. Had those devices had runtime PM disabled
before device_suspend() had run, device_resume() would have inadvertently
enable runtime PM for them, but this is not expected to happen because
it would require ->prepare() callbacks to return positive values for
devices with runtime PM disabled, which would be invalid.
In practice, this issue is most likely benign because pm_runtime_enable()
will not allow the "disable depth" counter to underflow, but it causes a
warning message to be printed for each affected device.
To allow device_resume() to distinguish the "direct complete" devices
that have been processed by device_suspend() from those which have not
been handled by it, make device_suspend() set power.is_suspended for
"direct complete" devices.
Next, move the power.is_suspended check in device_resume() before the
power.direct_complete check in it to make it skip the "direct complete"
devices that have not been handled by device_suspend().
This change is based on a preliminary patch from Saravana Kannan.
Fixes: aae4518b3124 ("PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily")
Link: https://lore.kernel.org/linux-pm/20241114220921.2529905-2-saravanak@google.com/
Reported-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://patch.msgid.link/12627587.O9o76ZdvQC@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eeb87d17aceab7803a5a5bcb6cf2817b745157cf ]
The check before setting power.must_resume in device_suspend_noirq()
does not take power.child_count into account, but it should do that, so
use pm_runtime_need_not_resume() in it for this purpose and adjust the
comment next to it accordingly.
Fixes: 107d47b2b95e ("PM: sleep: core: Simplify the SMART_SUSPEND flag handling")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3353728.44csPzL39Z@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b8f7bbd1f4ecff6d6277b8c454f62bb0a1c6dbe4 ]
When removing a genpd we don't clean up the genpd->dev correctly. Let's add
the missing put_device() in genpd_free_data() to fix this.
Fixes: 401ea1572de9 ("PM / Domain: Add struct device to genpd")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Message-ID: <20241122134207.157283-2-ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 692c20c4d075bd452acfbbc68200fc226c7c9496 ]
The inter-column space in the debug summary is two spaces. However, in
one case, the extra space is handled implicitly in a field width
specifier. Make inter-column space explicit to ease future maintenance.
Fixes: 45fbc464b047 ("PM: domains: Add "performance" column to debug summary")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ae61eb363621b981edde878e1e74d701702a579f.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e7a7681c859643f3f2476b2a28a494877fd89442 ]
When driver uses pm_runtime_force_suspend() as the system suspend callback
function and registers the wake irq with reverse enable ordering, the wake
irq will be re-enabled when entering system suspend, triggering an
'Unbalanced enable for IRQ xxx' warning. In this scenario, the call
sequence during system suspend is as follows:
suspend_devices_and_enter()
-> dpm_suspend_start()
-> dpm_run_callback()
-> pm_runtime_force_suspend()
-> dev_pm_enable_wake_irq_check()
-> dev_pm_enable_wake_irq_complete()
-> suspend_enter()
-> dpm_suspend_noirq()
-> device_wakeup_arm_wake_irqs()
-> dev_pm_arm_wake_irq()
To fix this issue, complete the setting of WAKE_IRQ_DEDICATED_ENABLED flag
in dev_pm_enable_wake_irq_complete() to avoid redundant irq enablement.
Fixes: 8527beb12087 ("PM: sleep: wakeirq: fix wake irq arming")
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Qingliang Li <qingliang.li@mediatek.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 741ba0134fa7822fcf4e4a0a537a5c4cfd706b20 upstream.
The unused clock cleanup uses the _sync initcall to give all users at
earlier initcalls time to probe. Do the same to avoid leaving some PDs
dangling at "on" (which actually happened on qcom!).
Fixes: 2fe71dcdfd10 ("PM / domains: Add late_initcall to disable unused PM domains")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231227-topic-pmdomain_sync_cleanup-v1-1-5f36769d538b@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cef9ecc8e938dd48a560f7dd9be1246359248d20 upstream.
Specs don't say anything about UIP being cleared within 10ms. They
only say that UIP won't occur for another 244uS. If a long NMI occurs
while UIP is still updating it might not be possible to get valid
data in 10ms.
This has been observed in the wild that around s2idle some calls can
take up to 480ms before UIP is clear.
Adjust callers from outside an interrupt context to wait for up to a
1s instead of 10ms.
Cc: <stable@vger.kernel.org> # 6.1.y
Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP")
Reported-by: Carsten Hatger <xmb8dsv4@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217626
Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231128053653.101798-5-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 120931db07b49252aba2073096b595482d71857c upstream.
The UIP timeout is hardcoded to 10ms for all RTC reads, but in some
contexts this might not be enough time. Add a timeout parameter to
mc146818_get_time() and mc146818_get_time_callback().
If UIP timeout is configured by caller to be >=100 ms and a call
takes this long, log a warning.
Make all callers use 10ms to ensure no functional changes.
Cc: <stable@vger.kernel.org> # 6.1.y
Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Link: https://lore.kernel.org/r/20231128053653.101798-4-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7839d0078e0d5e6cc2fa0b0dfbee71de74f1e557 upstream.
It is reported that in low-memory situations the system-wide resume core
code deadlocks, because async_schedule_dev() executes its argument
function synchronously if it cannot allocate memory (and not only in
that case) and that function attempts to acquire a mutex that is already
held. Executing the argument function synchronously from within
dpm_async_fn() may also be problematic for ordering reasons (it may
cause a consumer device's resume callback to be invoked before a
requisite supplier device's one, for example).
Address this by changing the code in question to use
async_schedule_dev_nocall() for scheduling the asynchronous
execution of device suspend and resume functions and to directly
run them synchronously if async_schedule_dev_nocall() returns false.
Link: https://lore.kernel.org/linux-pm/ZYvjiqX6EsL15moe@perf/
Reported-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Tested-by: Youngmin Nam <youngmin.nam@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: 5.7+ <stable@vger.kernel.org> # 5.7+: 6aa09a5bccd8 async: Split async_schedule_node_domain()
Cc: 5.7+ <stable@vger.kernel.org> # 5.7+: 7d4b5d7a37bd async: Introduce async_schedule_dev_nocall()
Cc: 5.7+ <stable@vger.kernel.org> # 5.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the wake-irq enable and disable helpers which have not been used
since commit bed570307ed7 ("PM / wakeirq: Fix dedicated wakeirq for
drivers not using autosuspend").
Note that these functions are essentially just leftovers from the first
iteration of the wake-irq implementation where device drivers were
supposed to call these functions themselves instead of PM core (as
is also indicated by the bogus kernel doc comments).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The decision whether to enable a wake irq during suspend can not be done
based on the runtime PM state directly as a driver may use wake irqs
without implementing runtime PM. Such drivers specifically leave the
state set to the default 'suspended' and the wake irq is thus never
enabled at suspend.
Add a new wake irq flag to track whether a dedicated wake irq has been
enabled at runtime suspend and therefore must not be enabled at system
suspend.
Note that pm_runtime_enabled() can not be used as runtime PM is always
disabled during late suspend.
Fixes: 69728051f5bf ("PM / wakeirq: Fix unbalanced IRQ enable for wakeirq")
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge updates related to system-wide power management and generic power
domains (genpd) updates for 6.5-rc1:
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng).
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui).
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann).
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello).
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson).
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich).
* pm-sleep:
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
PM: suspend: add a arch_resume_nosmt() prototype
PM: hibernate: Correct spelling mistake in a comment
PM: suspend: Fix pm_suspend_target_state handling for !CONFIG_PM
* pm-domains:
PM: domains: Move the verification of in-params from genpd_add_device()
PM: domains: fix integer overflow issues in genpd_parse_state()
|
|
Commit f38d1a6d0025 ("PM: domains: Allocate governor data dynamically
based on a genpd governor") started to use the in-parameters in
genpd_add_device(), without first doing a verification of them.
This isn't really a big problem, as most callers do a verification already.
Therefore, let's drop the verification from genpd_add_device() and make
sure all the callers take care of it instead.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: f38d1a6d0025 ("PM: domains: Allocate governor data dynamically based on a genpd governor")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move the pm_suspend_target_state definition for CONFIG_SUSPEND
unset from the wakeup code into the headers so as to allow it
to still be used elsewhere when CONFIG_SUSPEND is not set.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ rjw: Changelog and subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, while calculating residency and latency values, right
operands may overflow if resulting values are big enough.
To prevent this, albeit unlikely case, play it safe and convert
right operands to left ones' type s64.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 30f604283e05 ("PM / Domains: Allow domain power states to be read from DT")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
|
|
Assignments from pointer variables of type (void *) do not require
explicit type casts, so remove such type cases from the code in
drivers/base/power/main.c where applicable.
Signed-off-by: Li zeming <zeming@nfschina.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have one small patch to the clk core this time around. It fixes a
corner case with the CLK_OPS_PARENT_ENABLE flag combined with
clk_core_is_enabled() where it hangs the system. We'll simply assume
the clk is disabled if the parent is disabled and the flag is set.
Trying to turn on the parent to check the enable state of the clk runs
into system hangs at boot. We let this bake in -next for a couple
weeks to make sure there aren't any more issues because the last
attempt to fix this ran into hangs and had to be reverted.
Note: There were some more patches to the core framework around
sync_state and disabling unused clks, but I asked for that to be
reverted from the qcom PR because it isn't ready and we're still
discussing the best solution on the list.
Outside of the core clk framework, we have the usual collection of clk
driver updates and support for new SoCs (which seems to never stop).
The dirstat is dominated by Qualcomm because they added support for
quite a few SoCs this time around and also migrated quite a few of
their drivers to clk_parent_data. The other big diff is in the
Mediatek clk drivers that saw a significant rework this cycle to
similarly modernize the code, and we'll see that work continue in the
next cycle as well. Nothing really jumps out as scary here, except
that the significant churn in parent data descriptions can have typos
that go unnoticed. More details below.
Core:
- Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
New Drivers:
- Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET
ref clocks
- Support for Mediatek MT7891 SoC clks
- Support for many Qualcomm clk controllers:
- QDU1000/QRU1000 global clock controller
- SA8775P global clock controller
- SM8550 TCSR and display clock controller
- SM6350 clock controller
- MSM8996 CBF and APCS clock controllers
Updates:
- Various cleanups and improvements to Mediatek clk drivers to reduce
code size and modernize the drivers
- Support for Versa 5P49V60 clks
- Disable R-Car H3 ES1.*, as it was only available to an internal
development group and needed a lot of quirks and workarounds
- Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
resets on Renesas RZ/V2M
- Add display clocks on Renesas R-Car V4H
- Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
- Free the imx_uart_clocks even if imx_register_uart_clocks returns
early
- Get the stdout clocks count from device tree on i.MX
- Drop the clock count argument from imx_register_uart_clocks()
- Keep the uart clocks on i.MX93 for when earlycon is used
- Fix SPDX comment in i.MX6SLL clocks bindings header
- Drop some unnecessary spaces from i.MX8ULP clocks bindings header
- Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
not configured via devicetree
- Fix the ENET1 gate configuration for i.MX6UL according to the
reference manual
- Add ENET refclock mux support for i.MX6UL
- Add support for USB host/device configuration on Renesas RZ/N1
- Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car
V4H
- Add D1 CAN bus gates and resets for Allwinner
- Mark D1 CPUX clock as critical on Allwinner
- Reuse D1 driver for Allwinner R528/T113
- Cleanup sunxi-ng Kconfig
- Fix sunxi-ng kernel-doc issues
- Model Allwinner H3/H5 DRAM clock as fixed clock
- Use .determine_rate() instead of .round_rate() for the dualdiv,
mpll, sclk-div and cpu-dyn-div amlogic clock drivers
- DDR clocks were marked as critical in the proper clock driver for
each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
in the next releases as it only does clock enablement
- Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some
of them may use it
- Support synchronous power_off requests in the qcom GDSC driver for
proper GPU power collapse
- Drop test clocks from various Qualcomm clk drivers
- Update parent references to use clk_parent_data/clk_hw in various
Qualcomm clk drivers
- Fixes for the Qualcomm MSM8996 CPU clock controller
- Transition Qualcomm MSM8974 GCC off the externally defined
sleep_clk
- Add GDSCs in the global clock controller for Qualcomm QCS404
- The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
- Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and
SDM845 are moved to use the recently introduced properties in the
GDSC struct
- Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and
the IPA clock is added on a variety of platforms
- De-duplicate identical clks in Qualcomm SMD RPM clk driver
- Add a few missing clocks across msm8998, msm8992, msm8916, qcs404
to Qualcomm SDM RPM clk driver
- Various Qualcomm clk drivers use devm_pm_runtime_enable() to
simplify"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits)
clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
clk: qcom: Revert sync_state based clk_disable_unused
clk: imx: pll14xx: fix recalc_rate for negative kdiv
clk: rs9: Drop unused pin_xin field
MAINTAINERS: clk: imx: Add Peng Fan as reviewer
clk: sprd: Add dependency for SPRD_UMS512_CLK
clk: ralink: fix 'mt7621_gate_is_enabled()' function
clk: mediatek: clk-mtk: Remove unneeded semicolon
dt-bindings: clock: remove stih416 bindings
dt-bindings: clock: add loongson-2 clock
dt-bindings: clock: add loongson-2 clock include file
clk: imx: fix compile testing imxrt1050
clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
clk: qcom: cpu-8996: add missing cputype include
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add EPP support to the AMD P-state cpufreq driver, add support
for new platforms to the Intel RAPL power capping driver, intel_idle
and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194,
drop the custom cpufreq driver for loongson1 that is not necessary any
more (and the corresponding cpufreq platform device), fix assorted
issues and clean up code.
Specifics:
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya)
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang)
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney)
- Enable thermal cooling for Tegra194 (Yi-Wei Wang)
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss)
- Various dt binding updates for qcom-cpufreq-nvmem and
opp-v2-kryo-cpu (Christian Marangi)
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh)
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König)
- Make the TEO cpuidle governor check CPU utilization in order to
refine idle state selection (Kajetan Puchalski)
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in
that driver with arch_cpu_idle() to allow MWAIT to be used (Li
RongQing)
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy)
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann)
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh)
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki)
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski)
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald)
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald)
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap)
- Fix possible name leak in powercap_register_zone() (Yang Yingliang)
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui)
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada)
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui)
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman)
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring)
- Fix error checking in opp_migrate_dentry() (Qi Zheng)
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio)
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler)
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap)"
* tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
Documentation: amd-pstate: disambiguate user space sections
cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
PM: Add EXPORT macros for exporting PM functions
cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
MIPS: loongson32: Drop obsolete cpufreq platform device
powercap: intel_rapl: Fix handling for large time window
cpuidle: driver: Update microsecond values of state parameters as needed
cpuidle: sysfs: make kobj_type structures constant
cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
PM: EM: fix memory leak with using debugfs_lookup()
PM: domains: fix memory leak with using debugfs_lookup()
cpufreq: Make kobj_type structure constant
cpufreq: davinci: Fix clk use after free
cpufreq: amd-pstate: avoid uninitialized variable use
cpufreq: Make cpufreq_unregister_driver() return void
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
...
|
|
Merge updates of the powercap framework, generic PM domains, Energy
Model and operating performance points for 6.3-rc1:
- Fix possible name leak in powercap_register_zone() (Yang Yingliang).
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui).
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada).
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui).
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman).
- Add missing 'cache-unified' property in example for kryo OPP bindings
(Rob Herring).
- Fix error checking in opp_migrate_dentry() (Qi Zheng).
- Remove "select SRCU" (Paul E. McKenney).
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio).
* powercap:
powercap: intel_rapl: Fix handling for large time window
powercap: idle_inject: Support 100% idle injection
powercap: intel_rapl: add support for Emerald Rapids
powercap: intel_rapl: add support for Meteor Lake
powercap: fix possible name leak in powercap_register_zone()
* pm-domains:
PM: domains: fix memory leak with using debugfs_lookup()
* pm-em:
PM: EM: fix memory leak with using debugfs_lookup()
* pm-opp:
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: opp: v2-qcom-level: Let qcom,opp-fuse-level be a 2-long array
drivers/opp: Remove "select SRCU"
dt-bindings: opp: opp-v2-kryo-cpu: Add missing 'cache-unified' property in example
|
|
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND, so
note this in the kerneldoc.
If DPM_FLAG_SMART_SUSPEND is set and the PM core cannot skip system resume
it will call pm_runtime_active() on the driver. This can lead to an
inconsistent state where:
pm_runtime_force_suspend() called ->runtime_suspend
but
device_resume_noirq() called pm_runtime_set_active()
This leaves the driver actually suspended but marked as active.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
OMAP was the one and only user.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.782536366@infradead.org
|
|
Some genpd providers doesn't ensure that it has turned off at hardware.
This is fine until the consumer really requires during some special
scenarios that the power domain collapse at hardware before it is
turned ON again.
An example is the reset sequence of Adreno GPU which requires that the
'gpucc cx gdsc' power domain should move to OFF state in hardware at
least once before turning in ON again to clear the internal state.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102161757.v5.1.I3e6b1f078ad0f1ca9358c573daa7b70ec132cdbe@changeid
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include two new drivers (cpufreq driver for Apple SoC CPU
P-states and the SCMI Powercap based power capping driver), other new
hardware support and driver extensions (Qualcomm cpufreq driver and
its DT bindings, TI cpufreq driver, intel_pstate, intel-uncore-freq),
a bunch of fixes and cleanups all over and a cpupower utility update
including new features related to RAPL support.
Specifics:
- Fix nasty and hard to debug race condition introduced by mistake in
the runtime PM core code and clean up that code somewhat on top of
the fix (Rafael Wysocki)
- Generalize of_perf_domain_get_sharing_cpumask phandle format
(Hector Martin)
- Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin)
- Update Qualcomm cpufreq driver (Manivannan Sadhasivam, Chen Hui):
- CPU clock provider support
- Generic cleanups or reorganization
- Potential memleak fix
- Fix of the return value of cpufreq_driver->get()
- Update Qualcomm cpufreq driver's DT bindings (Manivannan
Sadhasivam, Rob Herring, Melody Olvera):
- Support for CPU clock provider
- Missing cache-related properties fixes
- Support for QDU1000/QRU1000
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan)
- Use flexible array to simplify memory allocation in the tegra186
cpufreq driver (Christophe JAILLET)
- Convert cpufreq statistics code to use sysfs_emit_at() (ye
xingchen)
- Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni
Gherdovich)
- Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq
driver (Xiongfeng Wang)
- Initialize the kobj_unregister completion before calling
kobject_init_and_add() in the cpufreq core code (Yongqiang Liu)
- Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes,
Nathan Chancellor)
- Make intel_pstate accept initial EPP value of 0x80 (Srinivas
Pandruvada)
- Make read-only array sys_clk_src in the SPEAr cpufreq driver static
(Colin Ian King)
- Make array speeds in the longhaul cpufreq driver static (Colin Ian
King)
- Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy
Shevchenko)
- Drop a reference to CVS from cpufreq documentation (Conghui Wang)
- Improve kernel messages printed by the PSCI cpuidle driver (Ulf
Hansson)
- Make the DT cpuidle driver return the correct number of parsed idle
states, clean it up and clarify a comment in it (Ulf Hansson)
- Modify the tasks freezing code to avoid using pr_cont() and refine
an error message printed by it (Rafael Wysocki)
- Make the hibernation core code complain about memory map mismatches
during resume to help diagnostics (Xueqin Luo)
- Fix mistake in a kerneldoc comment in the hibernation code
(xiongxin)
- Reverse the order of performance and enabling operations in the
generic power domains code (Abel Vesa)
- Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in
the generic power domains code (Abel Vesa)
- Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn
Guo)
- Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo)
- Drop generic power domain status manipulation during hibernate
restore (Shawn Guo)
- Fix compiler warnings with make W=1 in the idle_inject power
capping driver (Srinivas Pandruvada)
- Use kstrtobool() instead of strtobool() in the power capping sysfs
interface (Christophe JAILLET)
- Add SCMI Powercap based power capping driver (Cristian Marussi)
- Add Emerald Rapids support to the intel-uncore-freq driver (Artem
Bityutskiy)
- Repair slips in kernel-doc comments in the generic notifier code
(Lukas Bulwahn)
- Fix several DT issues in the OPP library reorganize code around
opp-microvolt-<named> DT property (Viresh Kumar)
- Allow any of opp-microvolt, opp-microamp, or opp-microwatt
properties to be present without the others present (James
Calligeros)
- Fix clock-latency-ns property in DT example (Serge Semin)
- Add a private governor_data for devfreq governors (Kant Fan)
- Reorganize devfreq code to use device_match_of_node() and
devm_platform_get_and_ioremap_resource() instead of open coding
them (ye xingchen, Minghao Chi)
- Make cpupower choose base_cpu to display default cpupower details
instead of picking CPU 0 (Saket Kumar Bhaskar)
- Add Georgian translation to cpupower documentation (Zurab
Kargareteli)
- Introduce powercap intel-rapl library, powercap-info command, and
RAPL monitor into cpupower (Thomas Renninger)"
* tag 'pm-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
PM: runtime: Adjust white space in the core code
cpufreq: Remove CVS version control contents from documentation
cpufreq: stats: Convert to use sysfs_emit_at() API
cpufreq: ACPI: Only set boost MSRs on supported CPUs
PM: sleep: Refine error message in try_to_freeze_tasks()
PM: sleep: Avoid using pr_cont() in the tasks freezing code
PM: runtime: Relocate rpm_callback() right after __rpm_callback()
PM: runtime: Do not call __rpm_callback() from rpm_idle()
PM / devfreq: event: use devm_platform_get_and_ioremap_resource()
PM / devfreq: event: Use device_match_of_node()
PM / devfreq: Use device_match_of_node()
powercap: idle_inject: Fix warnings with make W=1
PM: hibernate: Complain about memory map mismatches during resume
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq
cpufreq: tegra186: Use flexible array to simplify memory allocation
cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain
cpupower: Introduce powercap intel-rapl library and powercap-info command
cpupower: Add Georgian translation
cpufreq: intel_pstate: Add Sapphire Rapids support in no-HWP mode
cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are few major updates in the SoC specific drivers, mainly the
usual reworks and support for variants of the existing SoC. While this
remains Arm centric for the most part, the branch now also contains
updates to risc-v and loongarch specific code in drivers/soc/.
Notable changes include:
- Support for the newly added Qualcomm Snapdragon variants (MSM8956,
MSM8976, SM6115, SM4250, SM8150, SA8155 and SM8550) in the soc ID,
rpmh, rpm, spm and powerdomain drivers.
- Documentation for the somewhat controversial qcom,board-id
properties that are required for booting a number of machines
- A new SoC identification driver for the loongson-2 (loongarch)
platform
- memory controller updates for stm32, tegra, and renesas.
- a new DT binding to better describe LPDDR2/3/4/5 chips in the
memory controller subsystem
- Updates for Tegra specific drivers across multiple subsystems,
improving support for newer SoCs and better identification
- Minor fixes for Broadcom, Freescale, Apple, Renesas, Sifive, TI,
Mediatek and Marvell SoC drivers"
* tag 'soc-drivers-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (137 commits)
soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants
soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155
dt-bindings: soc: qcom: apr: document generic qcom,apr compatible
soc: qcom: Select REMAP_MMIO for ICC_BWMON driver
soc: qcom: Select REMAP_MMIO for LLCC driver
soc: qcom: rpmpd: Add SM4250 support
dt-bindings: power: rpmpd: Add SM4250 support
dt-bindings: soc: qcom: aoss: Add compatible for SM8550
soc: qcom: llcc: Add configuration data for SM8550
dt-bindings: arm: msm: Add LLCC compatible for SM8550
soc: qcom: llcc: Add v4.1 HW version support
soc: qcom: socinfo: Add SM8550 ID
soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response
soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets
soc: qcom: rpmhpd: Add SM8550 power domains
dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding
soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976
...
|
|
Merge cpuidle changes, updates related to system sleep amd generic power
domains code fixes for 6.2-rc1:
- Improve kernel messages printed by the cpuidle PCI driver (Ulf
Hansson).
- Make the DT cpuidle driver return the correct number of parsed idle
states, clean it up and clarify a comment in it (Ulf Hansson).
- Modify the tasks freezing code to avoid using pr_cont() and refine an
error message printed by it (Rafael Wysocki).
- Make the hibernation core code complain about memory map mismatches
during resume to help diagnostics (Xueqin Luo).
- Fix mistake in a kerneldoc comment in the hibernation code (xiongxin).
- Reverse the order of performance and enabling operations in the
generic power domains code (Abel Vesa).
- Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in the
generic power domains code (Abel Vesa).
- Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn
Guo).
- Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo).
- Drop generic power domain status manipulation during hibernate
restore (Shawn Guo).
* pm-cpuidle:
cpuidle: dt: Clarify a comment and simplify code in dt_init_idle_driver()
cpuidle: dt: Return the correct numbers of parsed idle states
cpuidle: psci: Extend information in log about OSI/PC mode
* pm-sleep:
PM: sleep: Refine error message in try_to_freeze_tasks()
PM: sleep: Avoid using pr_cont() in the tasks freezing code
PM: hibernate: Complain about memory map mismatches during resume
PM: hibernate: Fix mistake in kerneldoc comment
* pm-domains:
PM: domains: Reverse the order of performance and enabling ops
PM: domains: Power off[on] domain in hibernate .freeze[thaw]_noirq hook
PM: domains: Consolidate genpd_restore_noirq() and genpd_resume_noirq()
PM: domains: Pass generic PM noirq hooks to genpd_finish_suspend()
PM: domains: Drop genpd status manipulation for hibernate restore
|
|
Some inconsistent usage of white space in the PM-runtime core code
causes that code to be somewhat harder to read that it would have
been otherwise, so adjust the white space in there to be more
consistent with the rest of the code.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Because rpm_callback() is a wrapper around __rpm_callback(), and the
only caller of it after the change eliminating an invocation of it
from rpm_idle(), move the former next to the latter to make the code
a bit easier to follow.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
|
|
Calling __rpm_callback() from rpm_idle() after adding device links
support to the former is a clear mistake.
Not only it causes rpm_idle() to carry out unnecessary actions, but it
is also against the assumption regarding the stability of PM-runtime
status across __rpm_callback() invocations, because rpm_suspend() and
rpm_resume() may run in parallel with __rpm_callback() when it is called
by rpm_idle() and the device's PM-runtime status can be updated by any
of them.
Fixes: 21d5c57b3726 ("PM / runtime: Use device links")
Link: https://lore.kernel.org/linux-pm/36aed941-a73e-d937-2721-4f0decd61ce0@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
|
|
The ->set_performance_state() needs to be called before ->power_on()
when a genpd is powered on, and after ->power_off() when a genpd is
powered off. Do this in order to let the provider know to which
performance state to power on the genpd, on the power on sequence, and
also to maintain the performance for that genpd until after powering off,
on power off sequence.
There is no scenario where a consumer would need its genpd enabled and
then its performance state increased. Instead, in every scenario, the
consumer needs the genpd to be enabled from the start at a specific
performance state.
And same logic applies to the powering down. No consumer would need its
genpd performance state dropped right before powering down.
Now, there are currently two vendors which use ->set_performance_state()
in their genpd providers. One of them is Tegra, but the only genpd provider
(PMC) that makes use of ->set_performance_state() doesn't implement the
->power_on() or ->power_off(), and so it will not be affected by the ops
reversal.
The other vendor that uses it is Qualcomm, in multiple genpd providers
actually (RPM, RPMh and CPR). But all Qualcomm genpd providers that make
use of ->set_performance_state() need the order between enabling ops and
the performance setting op to be reversed. And the reason for that is that
it currently translates into two different voltages in order to power on
a genpd to a specific performance state. Basically, ->power_on() switches
to the minimum (enabling) voltage for that genpd, and then
->set_performance_state() sets it to the voltage level required by the
consumer.
By reversing the call order, we rely on the provider to know what to do
on each call, but most popular usecase is to cache the performance state
and postpone the voltage setting until the ->power_on() gets called.
As for the reason of still needing the ->power_on() and ->power_off() for a
provider which could get away with just having ->set_performance_state()
implemented, there are consumers that do not (nor should) provide an
opp-table. For those consumers, ->set_performance_state() will not be
called, and so they will enable the genpd to its minimum performance state
by a ->power_on() call. Same logic goes for the disabling.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The arch timer cannot wake up the Qualcomm Technologies, Inc. (QTI) SoCs
from the deeper CPUidle states. To be able to wakeup from these deeper
states, another always-on timer needs to be programmed through the so
called CONTROL_TCS.
As the RSC is part of CPU subsystem and the corresponding APSS RSC device
is attached to the cluster PM domain (through genpd), it holds the
responsibility to program the always-on timer, before entering any of these
deeper CPUidle states.
However, programming the timer requires information about the next hrtimer
wakeup for the cluster PM domain, which is currently only known by genpd.
Therefore, let's share this data through a new genpd helper function,
dev_pm_genpd_get_next_hrtimer().
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
[Ulf: Reworked the code and updated the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8450
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221018152837.619426-5-ulf.hansson@linaro.org
|
|
On platforms which use SHUTDOWN as hibernation mode, the genpd noirq
hooks will be called like below.
genpd_freeze_noirq() genpd_restore_noirq()
↓ ↑
Create snapshot image Restore target kernel
↓ ↑
genpd_thaw_noirq() genpd_freeze_noirq()
↓ ↑
Write snapshot image Read snapshot image
↓ ↑
power_down() Kernel boot
As of today suspend hooks genpd_suspend[resume]_noirq() manages domain
on/off state, but hibernate hooks genpd_freeze[thaw]_noirq() doesn't.
This results in a different behavior of domain power state between suspend
and hibernate freeze, i.e. domain is powered off for the former while on
for the later. It causes a problem on platforms like i.MX where the
domain needs to be powered on/off by calling clock and regulator interface.
When the platform restores from hibernation, the domain is off in hardware
and genpd_restore_noirq() tries to power it on, but will never succeed
because software state of domain (clock and regulator) is left on from the
last hibernate freeze, so kernel thinks that clock and regulator are
enabled while they are actually not turned on in hardware. The
consequence would be that devices in the power domain will access
registers without clock or power, and cause hardware lockup.
Power off[on] domain in hibernate .freeze[thaw]_noirq hook for reasons:
- Align the behavior between suspend and hibernate freeze.
- Have power state of domains stay in sync between hardware and software
for hibernate freeze, and thus fix the lockup issue seen on i.MX
platform.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Most of the logic between genpd_restore_noirq() and genpd_resume_noirq()
are identical. The suspended_count decrement for restore should be the
right thing to do anyway, considering there is an increment in
genpd_finish_suspend() for hibernation. So consolidate these two
functions into genpd_finish_resume().
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
While argument `poweroff` works fine for genpd_finish_suspend() to handle
distinction between suspend and poweroff, it won't scale if we want to
use it for freeze as well. Pass generic PM noirq hooks as arguments
instead, so that the function can possibly cover freeze case too.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The genpd status manipulation for hibernate restore has really never
worked as intended. For example, if the genpd->status was GENPD_STATE_ON,
the parent domain's `sd_count` must have been increased, so it needs to
be adjusted too. So drop this status manipulation.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Platforms can provide the information about the availability of each
idle states via status flag. Platforms may have to disable one or more
idle states for various reasons like broken firmware or other unmet
dependencies.
Fix handling of such unavailable/disabled idle states by ignoring them
while parsing the states.
Fixes: a3381e3a65cb ("PM / domains: Fix up domain-idle-states OF parsing")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Always-on PM domains must be on during initialisation or the domain is
currently silently rejected.
Print an error message in case an always-on domain is not on to make it
easier to debug drivers getting this wrong (e.g. by setting an always-on
genpd flag without making sure that the state matches).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge cpuidle changes, PM core changes and power capping changes for
6.1-rc1:
- Add AlderLake-N support to intel_idle (Zhang Rui).
- Replace strlcpy() with unused retval with strscpy() in intel_idle
(Wolfram Sang).
- Remove redundant check from cpuidle_switch_governor() (Yu Liao).
- Replace strlcpy() with unused retval with strscpy() in the powernv
cpuidle driver (Wolfram Sang).
- Drop duplicate word from a comment in the coupled cpuidle driver
(Jason Wang).
- Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it
in the flags and the device is about to resume (Rafael Wysocki).
- Add extra debugging statement for multiple active IRQs to system
wakeup handling code (Mario Limonciello).
- Replace strlcpy() with unused retval with strscpy() in the core
system suspend support code (Wolfram Sang).
- Update the intel_rapl power capping driver:
* Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui).
* Add support for RAPTORLAKE_S (Zhang Rui).
* Fix UBSAN shift-out-of-bounds issue (Chao Qin).
* pm-cpuidle:
intel_idle: Add AlderLake-N support
cpuidle: Remove redundant check in cpuidle_switch_governor()
intel_idle: move from strlcpy() with unused retval to strscpy()
cpuidle: powernv: move from strlcpy() with unused retval to strscpy()
cpuidle: coupled: Drop duplicate word from a comment
* pm-core:
PM: runtime: Return -EINPROGRESS from rpm_resume() in the RPM_NOWAIT case
* pm-sleep:
PM: wakeup: Add extra debugging statement for multiple active IRQs
PM: suspend: move from strlcpy() with unused retval to strscpy()
* powercap:
powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
powercap: intel_rapl: Add support for RAPTORLAKE_S
|
