summaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)AuthorFilesLines
2017-03-04Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-8/+4
Pull more SCSI updates from James Bottomley: "This is the set of stuff that didn't quite make the initial pull and a set of fixes for stuff which did. The new stuff is basically lpfc (nvme), qedi and aacraid. The fixes cover a lot of previously submitted stuff, the most important of which probably covers some of the failing irq vectors allocation and other fallout from having the SCSI command allocated as part of the block allocation functions" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (59 commits) scsi: qedi: Fix memory leak in tmf response processing. scsi: aacraid: remove redundant zero check on ret scsi: lpfc: use proper format string for dma_addr_t scsi: lpfc: use div_u64 for 64-bit division scsi: mac_scsi: Fix MAC_SCSI=m option when SCSI=m scsi: cciss: correct check map error. scsi: qla2xxx: fix spelling mistake: "seperator" -> "separator" scsi: aacraid: Fixed expander hotplug for SMART family scsi: mpt3sas: switch to pci_alloc_irq_vectors scsi: qedf: fixup compilation warning about atomic_t usage scsi: remove scsi_execute_req_flags scsi: merge __scsi_execute into scsi_execute scsi: simplify scsi_execute_req_flags scsi: make the sense header argument to scsi_test_unit_ready mandatory scsi: sd: improve TUR handling in sd_check_events scsi: always zero sshdr in scsi_normalize_sense scsi: scsi_dh_emc: return success in clariion_std_inquiry() scsi: fix memory leak of sdpk on when gd fails to allocate scsi: sd: make sd_devt_release() static scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework. ...
2017-02-28scripts/spelling.txt: add "followings" pattern and fix typo instancesMasahiro Yamada1-1/+1
Fix typos and add the following to the scripts/spelling.txt: followings||following While we are here, add a missing colon in the boilerplate in DT binding documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as well. I reworded "as the followings:" to "as follows:" for drivers/usb/gadget/udc/renesas_usb3.c. Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-22/+174
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs. A handful of driver changes this time around. The larger changes are: - Reset drivers for hi3660 and zx2967 - AHCI driver for Davinci, acked by Tejun and brought in here due to platform dependencies - Cleanups of atmel-ebi (External Bus Interface) - Tweaks for Rockchip GRF (General Register File) usage (kitchensink misc register range on the SoCs) - PM domains changes for support of two new ZTE SoCs (zx296718 and zx2967)" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits) soc: samsung: pmu: Add register defines for pad retention control reset: make zx2967 explicitly non-modular reset: core: fix reset_control_put soc: samsung: pm_domains: Read domain name from the new label property soc: samsung: pm_domains: Remove message about failed memory allocation soc: samsung: pm_domains: Remove unused name field soc: samsung: pm_domains: Use full names in subdomains registration log sata: ahci-da850: un-hardcode the MPY bits sata: ahci-da850: add a workaround for controller instability sata: ahci: export ahci_do_hardreset() locally sata: ahci-da850: implement a workaround for the softreset quirk sata: ahci-da850: add device tree match table sata: ahci-da850: get the sata clock using a connection id soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register memory: atmel-ebi: Enable the SMC clock if specified soc: samsung: pmu: Remove unused and duplicated defines memory: atmel-ebi: Properly handle multiple reference to the same CS memory: atmel-ebi: Fix the test to enable generic SMC logic soc: samsung: pm_domains: Add new Exynos5433 compatible soc: samsung: pmu: Add dummy support for Exynos5433 SoC ...
2017-02-24scsi: merge __scsi_execute into scsi_executeChristoph Hellwig1-8/+4
All but one caller want the decoded sense header, so offer the existing __scsi_execute helper as the public scsi_execute API to simply the callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22Merge branch 'for-4.11' of ↵Linus Torvalds23-187/+608
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - Bartlomiej added pata_falcon - Christoph is trying to remove use of static 4k buf. It's still WIP - config cleanup around HAS_DMA - other fixes and driver-specific changes * 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (29 commits) ata: pata_of_platform: using of_property_read_u32() helper pata_atiixp: Don't use unconnected secondary port on SB600/SB700 libata-sff: Don't scan disabled ports when checking for legacy mode. pata_octeon_cf: remove unused local variables from octeon_cf_set_piomode() ahci: qoriq: added ls2088a platforms support ahci: qoriq: report error when ecc register address is missing in dts ahci: qoriq: added a condition to enable dma coherence Revert "libata: switch to dynamic allocation instead of ata_scsi_rbuf" ahci: imx: fix building without hwmon or thermal ata: add Atari Falcon PATA controller driver ata: pass queued command to ->sff_data_xfer method ata: allow subsystem to be used on m68k arch libata: switch to dynamic allocation instead of ata_scsi_rbuf libata: don't call ata_scsi_rbuf_fill for command without a response buffer libata: call ->scsi_done from ata_scsi_simulate libata: remove the done callback from ata_scsi_args libata: move struct ata_scsi_args to libata-scsi.c libata: avoid global response buffer in atapi_qc_complete libata-eh: Use switch() instead of sparse array for protocol strings ata: sata_mv: Convert to devm_ioremap_resource() ...
2017-02-21Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds3-2/+1
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (ncr5380, ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid, megaraid_sas, ...). There's also an assortment of minor fixes and the major update of switching a bunch of drivers to pci_alloc_irq_vectors from Christoph" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (188 commits) scsi: megaraid_sas: handle dma_addr_t right on 32-bit scsi: megaraid_sas: array overflow in megasas_dump_frame() scsi: snic: switch to pci_irq_alloc_vectors scsi: megaraid_sas: driver version upgrade scsi: megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set value to 2 scsi: megaraid_sas: Indentation and smatch warning fixes scsi: megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug prints scsi: megaraid_sas: Increase internal command pool scsi: megaraid_sas: Use synchronize_irq to wait for IRQs to complete scsi: megaraid_sas: Bail out the driver load if ld_list_query fails scsi: megaraid_sas: Change build_mpt_mfi_pass_thru to return void scsi: megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCR scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool scsi: megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusion scsi: megaraid_sas: megasas_return_cmd does not memset IO frame to zero scsi: megaraid_sas: max_fw_cmds are decremented twice, remove duplicate scsi: megaraid_sas: update can_queue only if the new value is less scsi: megaraid_sas: Change max_cmd from u32 to u16 in all functions scsi: megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize pDevHandle to MR_DEVHANDLE_INVALID scsi: megaraid_sas: latest controller OCR capability from FW before sending shutdown DCMD ...
2017-02-18Merge branch 'for-4.11/next' into for-4.11/linus-mergeJens Axboe1-2/+2
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-07scsi: remove eh_timed_out methods in the transport templateChristoph Hellwig3-2/+1
Instead define the timeout behavior purely based on the host_template eh_timed_out method and wire up the existing transport implementations in the host templates. This also clears up the confusion that the transport template method overrides the host template one, so some drivers have to re-override the transport template one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-01block: introduce blk_rq_is_passthroughChristoph Hellwig1-1/+1
This can be used to check for fs vs non-fs requests and basically removes all knowledge of BLOCK_PC specific from the block layer, as well as preparing for removing the cmd_type field in struct request. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31sata: ahci-da850: un-hardcode the MPY bitsBartosz Golaszewski1-15/+76
All platforms using this driver now register the SATA refclk. Remove the hardcoded default value from the driver and instead read the rate of the external clock and calculate the required MPY value from it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Tejun Heo <tj@kernel.org> [nsekhar@ti.com: fix checkpatch warning about an unneeded else] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-31sata: ahci-da850: add a workaround for controller instabilityBartosz Golaszewski1-1/+27
We have a use case with the da850 SATA controller where at PLL0 frequency of 456MHz (needed to properly service the LCD controller) the chip becomes unstable and the hardreset operation is ignored the first time 50% of times. The sata core driver already retries to resume the link because some controllers ignore writes to the SControl register, but just retrying the resume operation doesn't work - we need to issue he phy/wake reset again to make it work. Reimplement ahci_hardreset() in the driver and poke the controller a couple times before really giving up. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-31sata: ahci: export ahci_do_hardreset() locallyBartosz Golaszewski2-5/+16
We need a way to retrieve the information about the online state of the link in the ahci-da850 driver. Create a new function: ahci_do_hardreset() which is called from ahci_hardreset() for backwards compatibility, but has an additional argument: 'online' - which can be used to check if the link is online after this function returns. The new routine will be used in the ahci-da850 driver to avoid code duplication when implementing a workaround for tha da850 SATA controller quirk/instability. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-31sata: ahci-da850: implement a workaround for the softreset quirkBartosz Golaszewski1-1/+32
There's an issue with the da850 SATA controller: if port multiplier support is compiled in, but we're connecting the drive directly to the SATA port on the board, the drive can't be detected. To make SATA work on the da850-lcdk board: first try to softreset with pmp - if the operation fails with -EBUSY, retry without pmp. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-31sata: ahci-da850: add device tree match tableBartosz Golaszewski1-0/+7
We're using device tree for da850-lcdk. Add the match table to allow to probe the driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-31sata: ahci-da850: get the sata clock using a connection idBartosz Golaszewski1-0/+16
In preparation for using two clocks in the driver (the sysclk2-based clock and the external REFCLK), check if we got the functional clock after calling ahci_platform_get_resources(). If not, retry calling clk_get() with con_id specified. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-28block: split scsi_request out of struct requestChristoph Hellwig1-1/+1
And require all drivers that want to support BLOCK_PC to allocate it as the first thing of their private data. To support this the legacy IDE and BSG code is switched to set cmd_size on their queues to let the block layer allocate the additional space. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-24ata: pata_of_platform: using of_property_read_u32() helperKefeng Wang1-7/+2
Using better of_property_read_u32() than generic of_get_property(). Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-23pata_atiixp: Don't use unconnected secondary port on SB600/SB700Darren Stevens1-0/+5
The SB600 and SB700 southbridge chips from ATI/AMD only have connections for the primary IDE port. As these chips have unique pci device ID's use these to mark the secondary port as 'dummy' Signed-off-by: Darren Stevens <darren@stevens-zone.net> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-23libata-sff: Don't scan disabled ports when checking for legacy mode.Darren Stevens1-3/+13
libata-sff.c checks for legacy mode by testing if both primary and secondary ports on a controller are in legacy mode and selects legacy if either one is. However on some south bridge chips (e.g AMD SB600/SB700) the secondary port is not wired, and when it is disabled by setting the disable bit in the PCI header it appears as a fixed legacy port. Prevent incorrect detection by not testing ports that are marked as 'dummy' tj: Addressed Sergei's review points. Other style edits. Signed-off-by: Darren Stevens <darren@stevens-zone.net> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
2017-01-23pata_octeon_cf: remove unused local variables from octeon_cf_set_piomode()Tejun Heo1-8/+0
@t1 and @t2i are calculated along with @t2 but never used. Drop them. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: David Binderman <dcb314@hotmail.com>
2017-01-20ahci: qoriq: added ls2088a platforms supportTang Yuantian1-0/+9
Ls2088a is new introduced arm-based soc with sata support with following features: 1. Complies with the serial ATA 3.0 specification and the AHCI 1.3.1 specification 2. Contains a high-speed descriptor-based DMA controller 3. Supports the following: a. Speeds of 1.5 Gb/s (first-generation SATA), 3 Gb/s (second-generation SATA), and 6 Gb/s (third-generation SATA) b. FIS-based switching c. Native command queuing (NCQ) commands d. Port multiplier operation e. Asynchronous notification f. SATA BIST mode Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-20ahci: qoriq: report error when ecc register address is missing in dtsTang Yuantian1-2/+9
For ls1021a, and armv8 chasis 2 socs, sata ecc must be disabled. If ecc register is not found in sata node in dts, report error. This is a chip erratum described as bellow: The Read DMA operations get early termination indication from the controller. This issue is observed as CRC error in the status registers. The issue is due to address collision at address 0 in the dual port memory. The read is a dummy read to flush out the header, but due to collision the controller logs the mbit error reported by the ECC check logic. This results in the early termination of the Read DMA operation by the controller. The issue happens to all the interface speeds(GEN1/2/3) for all the products. Workaround: Disable ECC feature on those platforms. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-20ahci: qoriq: added a condition to enable dma coherenceTang Yuantian1-4/+11
Enable DMA coherence in SATA controller on condition that dma-coherent property exists in sata node in DTS. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-18Revert "libata: switch to dynamic allocation instead of ata_scsi_rbuf"Tejun Heo1-36/+86
This reverts commit a234f7395c9301a5048cb2daa4c86f15c6f02de8. The commit tried to get rid of the shared global SCSI response buffer. Unfortunately, it added blocking allocation to atomic path. Revert it for now. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Christoph Hellwig <hch@lst.de>
2017-01-16ahci: imx: fix building without hwmon or thermalArnd Bergmann2-1/+3
When CONFIG_HWMON is disabled, we now get a link failure: ERROR: "devm_hwmon_device_register_with_groups" [drivers/ata/ahci_imx.ko] undefined! drivers/ata/ahci_imx.o: In function `imx_ahci_probe': ahci_imx.c:(.text.imx_ahci_probe+0x304): undefined reference to `devm_thermal_zone_of_sensor_register' This makes the code calling into the hwmon subsystem compile-time conditional, and adds a Kconfig dependency to avoid the corner case of having HWMON=m and AHCI_IMX=y, by forcing AHCI_IMX=m in this case. The thermal subsystem already has a check in its header, but that also doesn't cover the THERMAL=m case, so we need a somewhat complex Kconfig expression to handle all cases. Fixes: 54643a83b41a ("ahci: imx: Add imx53 SATA temperature sensor support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-10ata: add Atari Falcon PATA controller driverBartlomiej Zolnierkiewicz3-0/+194
Add Atari Falcon PATA controller driver. The major difference when compared to legacy IDE's falconide host driver is that we are using polled PIO mode and thus avoiding the need for STDMA locking magic altogether. Tested under ARAnyM emulator. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-10ata: pass queued command to ->sff_data_xfer methodBartlomiej Zolnierkiewicz10-43/+48
For Atari Falcon PATA support we need to check the current command in its ->sff_data_xfer method. Update core code and all users accordingly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-10ata: allow subsystem to be used on m68k archBartlomiej Zolnierkiewicz1-1/+1
When libata was merged m68k lacked IOMAP support. This has not been true for a long time now so allow subsystem to be used on m68k. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-10libata: switch to dynamic allocation instead of ata_scsi_rbufChristoph Hellwig1-86/+36
Note of the emulated commands in the pageout/pagein path, so just do a GFP_NOIO dynamic allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-10libata: don't call ata_scsi_rbuf_fill for command without a response bufferChristoph Hellwig1-21/+1
No need to copy a zeroed buffer to the caller if the command is defined to not have a response in the SCSI spec. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-10libata: call ->scsi_done from ata_scsi_simulateChristoph Hellwig1-15/+7
We always need to call ->scsi_done after we've finished emulating a command, so do it in a single place at the end of ata_scsi_simulate. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-10libata: remove the done callback from ata_scsi_argsChristoph Hellwig1-3/+1
It's always the scsi_done callback, and we can get at that easily in the place where ->done is called. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-10libata: move struct ata_scsi_args to libata-scsi.cChristoph Hellwig2-7/+7
It's only used in libata-scsi.c, so move it closer to the users. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-10libata: avoid global response buffer in atapi_qc_completeChristoph Hellwig1-24/+22
We only need to look at 4 bytes of the inquiry response for ATAPI devices. Instead of using the global ata_scsi_rbuf just use a a stack buffer. Also factor the fixup into it's own little helper function to make it more readable. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-09libata-eh: Use switch() instead of sparse array for protocol stringsGeert Uytterhoeven1-13/+31
Replace the sparse 256-pointer array for looking up protocol strings by a switch() statement to reduce kernel size. According to bloat-o-meter, this saves 910 bytes on m68k (32-bit), and 1892 bytes on arm64 (64-bit). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-09ata: sata_mv: Convert to devm_ioremap_resource()Andy Shevchenko1-8/+5
Convert to devm_ioremap_resource() which provides more consistent error handling. Note that devm_ioremap_resource() provides its own error messages. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-09Merge branch 'for-4.10-fixes' into for-4.11Tejun Heo2-2/+7
2017-01-06ata: sata_mv:- Handle return value of devm_ioremap.Arvind Yadav1-0/+3
Here, If devm_ioremap will fail. It will return NULL. Then hpriv->base = NULL - 0x20000; Kernel can run into a NULL-pointer dereference. This error check will avoid NULL pointer dereference. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2017-01-06libata: Fix ATA request senseDamien Le Moal1-0/+2
For an ATA device supporting the sense data reporting feature set, a failed command will trigger the execution of ata_eh_request_sense if the result task file of the failed command has the ATA_SENSE bit set (sense data available bit). ata_eh_request_sense executes the REQUEST SENSE DATA EXT command to retrieve the sense data of the failed command. On success of REQUEST SENSE DATA EXT, the ATA_SENSE bit will NOT be set (the command succeeded) but ata_eh_request_sense nevertheless tests the availability of sense data by testing that bit presence in the result tf of the REQUEST SENSE DATA EXT command. This leads us to falsely assume that request sense data failed and to the warning message: atax.xx: request sense failed stat 50 emask 0 Upon success of REQUEST SENSE DATA EXT, set the ATA_SENSE bit in the result task file command so that sense data can be returned by ata_eh_request_sense. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2017-01-06ata: sata_mv: fix module license specificationUwe Kleine-König1-1/+1
The header allows GPL v2 only, so declare "GPL v2" for MODULE_LICENSE Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-06ahci: imx: Add imx53 SATA temperature sensor supportCsaba Kertesz1-0/+195
Add a hwmon entry to get the temperature from the die of imx53 SATA. The original patch was made by Richard Zhu for kernel 2.6.x: ENGR00134041-MX53-Add-the-SATA-AHCI-temperature-monitor.patch Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-06libata: apply MAX_SEC_1024 to all CX1-JB*-HP devicesTejun Heo1-2/+2
Marko reports that CX1-JB512-HP shows the same timeout issues as CX1-JB256-HP. Let's apply MAX_SEC_128 to all devices in the series. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Marko Koski-Vähälä <marko@koski-vahala.com> Cc: stable@vger.kernel.org # v3.19+
2017-01-06ata: ahci_xgene: free structure returned by acpi_get_object_info()Michał Kępień1-2/+4
acpi_get_object_info() allocates the returned structure, which the caller has to free when the call succeeds. Free it when appropriate. Fixes: c9802a4be661 ("ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.") Signed-off-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-06libata: Protect DMA core code by #ifdef CONFIG_HAS_DMAGeert Uytterhoeven1-26/+35
If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/ata/libata.ko] undefined! To fix this, protect the DMA code by #ifdef CONFIG_HAS_DMA, and provide dummies of ata_sg_clean() and ata_sg_setup() for the !CONFIG_HAS_DMA case. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-06libata: Make ata_sg_clean() static againGeert Uytterhoeven2-2/+1
Commit 70e6ad0c6d1e6cb9 ("[PATCH] libata: prepare ata_sg_clean() for invocation from EH") made ata_sg_clean() global, but no user outside libata-core.c has ever materialized. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-06ata: AHCI and other non-SFF native drivers should depend on HAS_DMAGeert Uytterhoeven1-0/+4
If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/ata/libahci_platform.ko] undefined! ERROR: "dmam_alloc_coherent" [drivers/ata/libahci.ko] undefined! Add a block dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-06ata: ATA_BMDMA should depend on HAS_DMAGeert Uytterhoeven1-0/+1
If NO_DMA=y: ERROR: "dmam_alloc_coherent" [drivers/ata/libata.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-06ata: SATA_HIGHBANK should depend on HAS_DMAGeert Uytterhoeven1-0/+1
If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/ata/sata_highbank.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-06ata: SATA_MV should depend on HAS_DMAGeert Uytterhoeven1-0/+1
If NO_DMA=y: ERROR: "dma_pool_alloc" [drivers/ata/sata_mv.ko] undefined! ERROR: "dmam_pool_create" [drivers/ata/sata_mv.ko] undefined! ERROR: "dma_pool_free" [drivers/ata/sata_mv.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-12-14Merge branch 'for-4.10' of ↵Linus Torvalds2-20/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull another libata patch from Tejun Heo: "One more patch from Adam added. It makes libata skip probing for NCQ prio unless the feature is explicitly requested by the user. This is necessary because some controllers lock up after the optional feature is probed" * 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: avoid probing NCQ Prio Support if not explicitly requested
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 19:09:18 +0300