| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit ba624ba88d9f5c3e2ace9bb6697dbeb05b2dbc44 ]
According to a user report, the ST2000DM008-2FR102 has problems with LPM.
Reported-by: Emerson Pinter <e@pinter.dev>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220693
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b32cc17d607e8ae7af037303fe101368cb4dc44c upstream.
Call scsi_device_put() in ata_scsi_dev_rescan() if the device or its
queue are not running.
Fixes: 0c76106cb975 ("scsi: sd: Fix TCG OPAL unlock on system resume")
Cc: stable@vger.kernel.org
Signed-off-by: Yihang Li <liyihang9@h-partners.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b11890683380a36b8488229f818d5e76e8204587 upstream.
Commit cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status
handling") fixed ata_to_sense_error() to properly generate sense key
ABORTED COMMAND (without any additional sense code), instead of the
previous bogus sense key ILLEGAL REQUEST with the additional sense code
UNALIGNED WRITE COMMAND, for a failed command.
However, this broke suspend for Security locked drives (drives that have
Security enabled, and have not been Security unlocked by boot firmware).
The reason for this is that the SCSI disk driver, for the Synchronize
Cache command only, treats any sense data with sense key ILLEGAL REQUEST
as a successful command (regardless of ASC / ASCQ).
After commit cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error()
status handling") the code that treats any sense data with sense key
ILLEGAL REQUEST as a successful command is no longer applicable, so the
command fails, which causes the system suspend to be aborted:
sd 1:0:0:0: PM: dpm_run_callback(): scsi_bus_suspend returns -5
sd 1:0:0:0: PM: failed to suspend async: error -5
PM: Some devices failed to suspend, or early wake event detected
To make suspend work once again, for a Security locked device only,
return sense data LOGICAL UNIT ACCESS NOT AUTHORIZED, the actual sense
data which a real SCSI device would have returned if locked.
The SCSI disk driver treats this sense data as a successful command.
Cc: stable@vger.kernel.org
Reported-by: Ilia Baryshnikov <qwelias@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220704
Fixes: cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status handling")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d2be9ea9a75550a35c5127a6c2633658bc38c76b upstream.
ata_gen_ata_sense() is always called for a failed qc missing sense data
so that a sense key, code and code qualifier can be generated using
ata_to_sense_error() from the qc status and error fields of its result
task file. However, if the qc does not have its result task file filled,
ata_gen_ata_sense() returns early without setting a sense key.
Improve this by defaulting to returning ABORTED COMMAND without any
additional sense code, since we do not know the reason for the failure.
The same fix is also applied in ata_gen_passthru_sense() with the
additional check that the qc failed (qc->err_mask is set).
Fixes: 816be86c7993 ("ata: libata-scsi: Check ATA_QCFLAG_RTF_FILLED before using result_tf")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 58768b0563916ddcb73d8ed26ede664915f8df31 upstream.
Delete extra checks for the ATA_DFLAG_CDL_ENABLED flag that prevent
SET FEATURES command from being issued to a drive when NCQ commands
are active.
ata_mselect_control_ata_feature() sets / clears the ATA_DFLAG_CDL_ENABLED
flag during the translation of MODE SELECT to SET FEATURES. If SET FEATURES
gets deferred due to outstanding NCQ commands, the original MODE SELECT
command will be re-queued. When the re-queued MODE SELECT goes through
the ata_mselect_control_ata_feature() translation again, SET FEATURES
will not be issued because ATA_DFLAG_CDL_ENABLED has been already set or
cleared by the initial translation of MODE SELECT.
The ATA_DFLAG_CDL_ENABLED checks in ata_mselect_control_ata_feature()
are safe to remove because scsi_cdl_enable() implements a similar logic
that avoids enabling CDL if it has been enabled already.
Fixes: 17e897a45675 ("ata: libata-scsi: Improve CDL control")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cf3fc037623c54de48d2ec1a1ee686e2d1de2d45 upstream.
Commit 8ae720449fca ("libata: whitespace fixes in ata_to_sense_error()")
inadvertantly added the entry 0x40 (ATA_DRDY) to the stat_table array in
the function ata_to_sense_error(). This entry ties a failed qc which has
a status filed equal to ATA_DRDY to the sense key ILLEGAL REQUEST with
the additional sense code UNALIGNED WRITE COMMAND. This entry will be
used to generate a failed qc sense key and sense code when the qc is
missing sense data and there is no match for the qc error field in the
sense_table array of ata_to_sense_error().
As a result, for a failed qc for which we failed to get sense data (e.g.
read log 10h failed if qc is an NCQ command, or REQUEST SENSE EXT
command failed for the non-ncq case, the user very often end up seeing
the completely misleading "unaligned write command" error, even if qc
was not a write command. E.g.:
sd 0:0:0:0: [sda] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#12 Sense Key : Illegal Request [current]
sd 0:0:0:0: [sda] tag#12 Add. Sense: Unaligned write command
sd 0:0:0:0: [sda] tag#12 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
I/O error, dev sda, sector 4096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Fix this by removing the ATA_DRDY entry from the stat_table array so
that we default to always returning ABORTED COMMAND without any
additional sense code, since we do not know any better. The entry 0x08
(ATA_DRQ) is also removed since signaling ABORTED COMMAND with a parity
error is also misleading (as a parity error would likely be signaled
through a bus error). So for this case, also default to returning
ABORTED COMMAND without any additional sense code. With this, the
previous example error case becomes:
sd 0:0:0:0: [sda] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#17 Sense Key : Aborted Command [current]
sd 0:0:0:0: [sda] tag#17 Add. Sense: No additional sense information
sd 0:0:0:0: [sda] tag#17 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
I/O error, dev sda, sector 4096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Together with these fixes, refactor stat_table to make it more readable
by putting the entries comments in front of the entries and using the
defined status bits macros instead of hardcoded values.
Reported-by: Lorenz Brun <lorenz@brun.one>
Reported-by: Brandon Schwartz <Brandon.Schwartz@wdc.com>
Fixes: 8ae720449fca ("libata: whitespace fixes in ata_to_sense_error()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ed62a62a18bc144f73eadf866ae46842e8f6606e upstream.
Improve the description of the possible default SATA link power
management policies and add the missing description for policy 5.
No functional changes.
Fixes: a5ec5a7bfd1f ("ata: ahci: Support state with min power but Partial low power state")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0060beec0bfa647c4b510df188b1c4673a197839 upstream.
A port link power management (LPM) policy can be controlled using the
link_power_management_policy sysfs host attribute. However, this
attribute exists also for hosts that do not support LPM and in such
case, attempting to change the LPM policy for the host (port) will fail
with -EOPNOTSUPP.
Introduce the new sysfs link_power_management_supported host attribute
to indicate to the user if a the port and the devices connected to the
port for the host support LPM, which implies that the
link_power_management_policy attribute can be used.
Since checking that a port and its devices support LPM is common between
the new ata_scsi_lpm_supported_show() function and the existing
ata_scsi_lpm_store() function, the new helper ata_scsi_lpm_supported()
is introduced.
Fixes: 413e800cadbf ("ata: libata-sata: Disallow changing LPM state if not supported")
Reported-by: Borah, Chaitanya Kumar <chaitanya.kumar.borah@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202507251014.a5becc3b-lkp@intel.com
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 413e800cadbf67550d76c77c230b2ecd96bce83a ]
Modify ata_scsi_lpm_store() to return an error if a user attempts to set
a link power management policy for a port that does not support LPM,
that is, ports flagged with ATA_FLAG_NO_LPM.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250701125321.69496-6-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f7870e8d345cdabfb94bcbdcba6a07e050f8705e ]
The AHCI specification version 1.3.1 section 8.3.1.4 (Software
Requirements and Precedence) states that:
If CAP.SSC or CAP.PSC is cleared to ‘0’, software should disable
device-initiated power management by issuing the appropriate SET
FEATURES command to the device.
To satisfy this constraint and force ata_dev_configure to disable the
device DIPM feature, modify ahci_update_initial_lpm_policy() to set the
ATA_FLAG_NO_DIPM flag on ports that have a host with either the
ATA_HOST_NO_PART flag set or the ATA_HOST_NO_SSC flag set.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de.>
Link: https://lore.kernel.org/r/20250701125321.69496-7-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 65b2c92f69d3df81422d27e5be012e357e733241 ]
Commit fa997b0576c9 ("ata: ahci: Do not enable LPM if no LPM states are
supported by the HBA") introduced an early return in
ahci_update_initial_lpm_policy() to ensure that the target_lpm_policy
of ports belonging to a host that does not support the Partial, Slumber
and DevSleep power states is unchanged and remains set to
ATA_LPM_UNKNOWN and thus prevents the execution of
ata_eh_link_set_lpm().
However, a user or a system daemon (e.g. systemd-udevd) may still
attempt changing the LPM policy through the sysfs
link_power_management_policy of the host.
Improve this to prevent sysfs LPM policy changes by setting the flag
ATA_FLAG_NO_LPM for the port of such host, and initialize the port
target_lpm_policy to ATA_LPM_MAX_POWER to guarantee that no unsupported
low power state is being used on the port and its link.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250701125321.69496-9-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fe5b391fc56f77cf3c22a9dd4f0ce20db0e3533f ]
On 32-bit ARCH=um, CONFIG_X86_32 is still defined, so it
doesn't indicate building on real X86 machines. There's
no MSR on UML though, so add a check for CONFIG_X86.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20250606090110.15784-2-johannes@sipsolutions.net
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 33877220b8641b4cde474a4229ea92c0e3637883 ]
On at least an ASRock 990FX Extreme 4 with a VIA VT6330, the devices
have not yet been enabled by the first time ata_acpi_cbl_80wire() is
called. This means that the ata_for_each_dev loop is never entered,
and a 40 wire cable is assumed.
The VIA controller on this board does not report the cable in the PCI
config space, thus having to fall back to ACPI even though no SATA
bridge is present.
The _GTM values are correctly reported by the firmware through ACPI,
which has already set up faster transfer modes, but due to the above
the controller is forced down to a maximum of UDMA/33.
Resolve this by modifying ata_acpi_cbl_80wire() to directly return the
cable type. First, an unknown cable is assumed which preserves the mode
set by the firmware, and then on subsequent calls when the devices have
been enabled, an 80 wire cable is correctly detected.
Since the function now directly returns the cable type, it is renamed
to ata_acpi_cbl_pata_type().
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20250519085945.1399466-1-tasos@tasossah.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3e0809b1664b9dc650d9dbca9a2d3ac690d4f661 upstream.
ASUS store the board name in DMI_PRODUCT_NAME rather than
DMI_PRODUCT_VERSION. (Apparently it is only Lenovo that stores the
model-name in DMI_PRODUCT_VERSION.)
Use the correct DMI identifier, DMI_PRODUCT_NAME, to match the
ASUSPRO-D840SA board, such that the quirk actually gets applied.
Cc: stable@vger.kernel.org
Reported-by: Andy Yang <andyybtc79@gmail.com>
Tested-by: Andy Yang <andyybtc79@gmail.com>
Closes: https://lore.kernel.org/linux-ide/aFb3wXAwJSSJUB7o@ryzen/
Fixes: b5acc3628898 ("ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard")
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250624074029.963028-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a7b3b77fd111d49f8e25624e4ea1046322a57baf upstream.
Asus ROG STRIX B550-F GAMING (WI-FI) motherboard has problems on some
SATA ports with at least one hard drive model (WDC WD20EFAX-68FB5N0)
when LPM is enabled. Disabling LPM solves the issue.
Cc: stable@vger.kernel.org
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Signed-off-by: Mikko Korhonen <mjkorhon@gmail.com>
Link: https://lore.kernel.org/r/20250617062055.784827-1-mjkorhon@gmail.com
[cassel: more detailed comment, make single line comments consistent]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b5acc3628898baa63658bc4125f9525f9b3dd4f3 upstream.
A user has bisected a regression which causes graphical corruptions on his
screen to commit 7627a0edef54 ("ata: ahci: Drop low power policy board
type").
Simply reverting commit 7627a0edef54 ("ata: ahci: Drop low power policy
board type") makes the graphical corruptions on his screen to go away.
(Note: there are no visible messages in dmesg that indicates a problem
with AHCI.)
The user also reports that the problem occurs regardless if there is an
HDD or an SSD connected via AHCI, so the problem is not device related.
The devices also work fine on other motherboards, so it seems specific to
the ASUSPRO-D840SA motherboard.
While enabling low power modes for AHCI is not supposed to affect
completely unrelated hardware, like a graphics card, it does however
allow the system to enter deeper PC-states, which could expose ACPI issues
that were previously not visible (because the system never entered these
lower power states before).
There are previous examples where enabling LPM exposed serious BIOS/ACPI
bugs, see e.g. commit 240630e61870 ("ahci: Disable LPM on Lenovo 50 series
laptops with a too old BIOS").
Since there hasn't been any BIOS update in years for the ASUSPRO-D840SA
motherboard, disable LPM for this board, in order to avoid entering lower
PC-states, which triggers graphical corruptions.
Cc: stable@vger.kernel.org
Reported-by: Andy Yang <andyybtc79@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220111
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250612141750.2108342-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d29fc02caad7f94b62d56ee1b01c954f9c961ba7 upstream.
The controller has a hardware bug that can hard hang the system when
doing ATAPI DMAs without any trace of what happened. Depending on the
device attached, it can also prevent the system from booting.
In this case, the system hangs when reading the ATIP from optical media
with cdrecord -vvv -atip on an _NEC DVD_RW ND-4571A 1-01 and an
Optiarc DVD RW AD-7200A 1.06 attached to an ASRock 990FX Extreme 4,
running at UDMA/33.
The issue can be reproduced by running the same command with a cygwin
build of cdrecord on WinXP, although it requires more attempts to cause
it. The hang in that case is also resolved by forcing PIO. It doesn't
appear that VIA has produced any drivers for that OS, thus no known
workaround exists.
HDDs attached to the controller do not suffer from any DMA issues.
Cc: stable@vger.kernel.org
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/916677
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20250519085508.1398701-1-tasos@tasossah.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 88474ad734fb2000805c63e01cc53ea930adf2c7 upstream.
For the ATA features subpage of the control mode page, the T10 SAT-6
specifications state that:
For a MODE SENSE command, the SATL shall return the CDL_CTRL field value
that was last set by an application client.
However, the function ata_msense_control_ata_feature() always sets the
CDL_CTRL field to the 0x02 value to indicate support for the CDL T2A and
T2B pages. This is thus incorrect and the value 0x02 must be reported
only after the user enables the CDL feature, which is indicated with the
ATA_DFLAG_CDL_ENABLED device flag. When this flag is not set, the
CDL_CTRL field of the ATA feature subpage of the control mode page must
report a value of 0x00.
Fix ata_msense_control_ata_feature() to report the correct values for
the CDL_CTRL field, according to the enable/disable state of the device
CDL feature.
Fixes: df60f9c64576 ("scsi: ata: libata: Add ATA feature control sub-page translation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit db91586b1e8f36122a9e5b8fbced11741488dd22 upstream.
The function ata_mselect_control_ata_feature() has a return type defined
as unsigned int but this function may return negative error codes, which
are correctly propagated up the call chain as integers.
Fix ata_mselect_control_ata_feature() to have the correct int return
type.
While at it, also fix a typo in this function description comment.
Fixes: df60f9c64576 ("scsi: ata: libata: Add ATA feature control sub-page translation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 17e897a456752ec9c2d7afb3d9baf268b442451b upstream.
With ATA devices supporting the CDL feature, using CDL requires that the
feature be enabled with a SET FEATURES command. This command is issued
as the translated command for the MODE SELECT command issued by
scsi_cdl_enable() when the user enables CDL through the device
cdl_enable sysfs attribute.
Currently, ata_mselect_control_ata_feature() always translates a MODE
SELECT command for the ATA features subpage of the control mode page to
a SET FEATURES command to enable or disable CDL based on the cdl_ctrl
field. However, there is no need to issue the SET FEATURES command if:
1) The MODE SELECT command requests disabling CDL and CDL is already
disabled.
2) The MODE SELECT command requests enabling CDL and CDL is already
enabled.
Fix ata_mselect_control_ata_feature() to issue the SET FEATURES command
only when necessary. Since enabling CDL also implies a reset of the CDL
statistics log page, avoiding useless CDL enable operations also avoids
clearing the CDL statistics log.
Also add debug messages to clearly signal when CDL is being enabled or
disabled using a SET FEATURES command.
Fixes: df60f9c64576 ("scsi: ata: libata: Add ATA feature control sub-page translation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 399eab7f92fb73ffe621294a2d6bec8fc9f3b36b ]
When filling the taskfile result for a successful NCQ command, we use
the SDB FIS from the FIS Receive Area, see e.g. ahci_qc_ncq_fill_rtf().
However, the SDB FIS only has fields STATUS and ERROR.
For a successful NCQ command that has sense data, we will have a
successful sense data descriptor, in the Sense Data for Successful NCQ
Commands log.
Since we have access to additional taskfile result fields, fill in these
additional fields in qc->result_tf.
This matches how for failing/aborted NCQ commands, we will use e.g.
ahci_qc_fill_rtf() to fill in some fields, but then for the command that
actually caused the NCQ error, we will use ata_eh_read_log_10h(), which
provides additional fields, saving additional fields/overriding the
qc->result_tf that was fetched using ahci_qc_fill_rtf().
Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0507c777f5d8f9e34b137d28ee263599a7b81242 ]
We use CD/DVD drives under Marvell 88SE9215 SATA controller on many
Loongson-based machines. We found its PIO doesn't work well, and on the
opposite its DMA seems work very well.
We don't know the detail of the 88SE9215 SATA controller, but we have
tested different CD/DVD drives and they all have problems under 88SE9215
(but they all work well under an Intel SATA controller). So, we consider
this problem is bound to 88SE9215 SATA controller rather than bound to
CD/DVD drives.
As a solution, we define a new dedicated AHCI board id which is named
board_ahci_yes_fbs_atapi_dma for 88SE9215, and for this id we set the
AHCI_HFLAG_ATAPI_DMA_QUIRK and ATA_QUIRK_ATAPI_MOD16_DMA flags on the
SATA controller in order to prefer ATAPI DMA.
Reported-by: Yuli Wang <wangyuli@uniontech.com>
Tested-by: Jie Fan <fanjie@uniontech.com>
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250318104314.2160526-1-chenhuacai@loongson.cn
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 885251dc35767b1c992f6909532ca366c830814a ]
Add support for Marvell Technology Group Ltd. 88SE9215 SATA 6 Gb/s
controller, which is e.g. used in the DAWICONTROL DC-614e RAID bus
controller and was not automatically recognized before.
Tested with a DAWICONTROL DC-614e RAID bus controller.
Signed-off-by: Daniel Kral <d.kral@proxmox.com>
Link: https://lore.kernel.org/r/20250304092030.37108-1-d.kral@proxmox.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 91ec84f8eaddbc93d7c62e363d68aeb7b89879c7 ]
atapi_eh_request_sense() currently uses ATAPI DMA if the SATA controller
has ATA_FLAG_PIO_DMA (PIO cmds via DMA) set.
However, ATA_FLAG_PIO_DMA is a flag that can be set by a low-level driver
on a port at initialization time, before any devices are scanned.
If a controller detects a connected device that only supports PIO, we set
the flag ATA_DFLAG_PIO.
Modify atapi_eh_request_sense() to not use ATAPI DMA if the connected
device only supports PIO.
Reported-by: Philip Pemberton <lists@philpem.me.uk>
Closes: https://lore.kernel.org/linux-ide/c6722ee8-5e21-4169-af59-cbbae9edc02f@philpem.me.uk/
Tested-by: Philip Pemberton <lists@philpem.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250221015422.20687-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit deca423213cb33feda15e261e7b5b992077a6a08 ]
Commit ae1f3db006b7 ("ata: ahci: do not enable LPM on external ports")
changed so that LPM is not enabled on external ports (hotplug-capable or
eSATA ports).
This is because hotplug and LPM are mutually exclusive, see 7.3.1 Hot Plug
Removal Detection and Power Management Interaction in AHCI 1.3.1.
This does require that firmware has set the appropate bits (HPCP or ESP)
in PxCMD (which is a per port register in the AHCI controller).
If the firmware has failed to mark a port as hotplug-capable or eSATA in
PxCMD, then there is currently not much a user can do.
If LPM is enabled on the port, hotplug insertions and removals will not be
detected on that port.
In order to allow a user to fix up broken firmware, add 'external' to the
libata.force kernel parameter.
libata.force can be specified either on the kernel command line, or as a
kernel module parameter.
For more information, see Documentation/admin-guide/kernel-parameters.txt.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250130133544.219297-4-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d46a27085039158eb5e253ab8a35a0e33b5e864 ]
The function pdc20621_prog_dimm0() calls the function pdc20621_i2c_read()
but does not handle the error if the read fails. This could lead to
process with invalid data. A proper implementation can be found in
/source/drivers/ata/sata_sx4.c, pdc20621_prog_dimm_global(). As mentioned
in its commit: bb44e154e25125bef31fa956785e90fccd24610b, the variable spd0
might be used uninitialized when pdc20621_i2c_read() fails.
Add error handling to pdc20621_i2c_read(). If a read operation fails,
an error message is logged via dev_err(), and return a negative error
code.
Add error handling to pdc20621_prog_dimm0() in pdc20621_dimm_init(), and
return a negative error code if pdc20621_prog_dimm0() fails.
Fixes: 4447d3515616 ("libata: convert the remaining SATA drivers to new init model")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ad320e408a8c95a282ab9c05cdf0c9b95e317985 ]
devm_ioremap() returns NULL on error. Currently, pxa_ata_probe() does
not check for this case, which can result in a NULL pointer dereference.
Add NULL check after devm_ioremap() to prevent this issue.
Fixes: 2dc6c6f15da9 ("[ARM] pata_pxa: DMA-capable PATA driver")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f2aac4c73c9945cce156fd58a9a2f31f2c8a90c7 ]
Before commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
the ATI AHCI controllers specified board type 'board_ahci' rather than
board type 'board_ahci'. This means that LPM was historically not enabled
for the ATI AHCI controllers.
By looking at commit 7a8526a5cd51 ("libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI
for Samsung 860 and 870 SSD."), it is clear that, for some unknown reason,
that Samsung SSDs do not play nice with ATI AHCI controllers. (When using
other AHCI controllers, NCQ can be enabled on these Samsung SSDs without
issues.)
In a similar way, from user reports, it is clear the ATI AHCI controllers
can enable LPM on e.g. Maxtor HDDs perfectly fine, but when enabling LPM
on certain Samsung SSDs, things break. (E.g. the SSDs will not get detected
by the ATI AHCI controller even after a COMRESET.)
Yet, when using LPM on these Samsung SSDs with other AHCI controllers, e.g.
Intel AHCI controllers, these Samsung drives appear to work perfectly fine.
Considering that the combination of ATI + Samsung, for some unknown reason,
does not seem to work well, disable LPM when detecting an ATI AHCI
controller with a problematic Samsung SSD.
Apply this new ATA_QUIRK_NO_LPM_ON_ATI quirk for all Samsung SSDs that have
already been reported to not play nice with ATI (ATA_QUIRK_NO_NCQ_ON_ATI).
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: Eric <eric.4.debian@grabatoulnz.fr>
Closes: https://lore.kernel.org/linux-ide/Z8SBZMBjvVXA7OAK@eldamar.lan/
Tested-by: Eric <eric.4.debian@grabatoulnz.fr>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250317170348.1748671-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6e74e53b34b6dec5a50e1404e2680852ec6768d2 upstream.
reveliofuzzing reported that a SCSI_IOCTL_SEND_COMMAND ioctl with out_len
set to 0xd42, SCSI command set to ATA_16 PASS-THROUGH, ATA command set to
ATA_NOP, and protocol set to ATA_PROT_PIO, can cause ata_pio_sector() to
write outside the allocated buffer, overwriting random memory.
While a ATA device is supposed to abort a ATA_NOP command, there does seem
to be a bug either in libata-sff or QEMU, where either this status is not
set, or the status is cleared before read by ata_sff_hsm_move().
Anyway, that is most likely a separate bug.
Looking at __atapi_pio_bytes(), it already has a safety check to ensure
that __atapi_pio_bytes() cannot write outside the allocated buffer.
Add a similar check to ata_pio_sector(), such that also ata_pio_sector()
cannot write outside the allocated buffer.
Cc: stable@vger.kernel.org
Reported-by: reveliofuzzing <reveliofuzzing@gmail.com>
Closes: https://lore.kernel.org/linux-ide/CA+-ZZ_jTgxh3bS7m+KX07_EWckSnW3N2adX3KV63y4g7M4CZ2A@mail.gmail.com/
Link: https://lore.kernel.org/r/20250127154303.15567-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 676fe1f6f74db988191dab5df3bf256908177072 upstream.
The OF node reference obtained by of_parse_phandle_with_args() is not
released on early return. Add a of_node_put() call before returning.
Fixes: 8996b89d6bc9 ("ata: add platform driver for Calxeda AHCI controller")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When ata_qc_complete() schedules a command for EH using
ata_qc_schedule_eh(), blk_abort_request() will be called, which leads to
req->q->mq_ops->timeout() / scsi_timeout() being called.
scsi_timeout(), if the LLDD has no abort handler (libata has no abort
handler), will set host byte to DID_TIME_OUT, and then call
scsi_eh_scmd_add() to add the command to EH.
Thus, when commands first enter libata's EH strategy_handler, all the
commands that have been added to EH will have DID_TIME_OUT set.
Commit e5dd410acb34 ("ata: libata: Clear DID_TIME_OUT for ATA PT commands
with sense data") clears this bogus DID_TIME_OUT flag for all commands
that reached libata's EH strategy_handler.
libata has its own flag (AC_ERR_TIMEOUT), that it sets for commands that
have not received a completion at the time of entering EH.
ata_eh_worth_retry() has no special handling for AC_ERR_TIMEOUT, so by
default timed out commands will get flag ATA_QCFLAG_RETRY set, and will be
retried after the port has been reset (ata_eh_link_autopsy() always
triggers a port reset if any command has AC_ERR_TIMEOUT set).
For a command that has ATA_QCFLAG_RETRY set, while also having an error
flag set (e.g. AC_ERR_TIMEOUT), ata_eh_finish() will not increment
scmd->allowed, so the command will at most be retried scmd->allowed number
of times (which by default is set to 3).
However, scsi_eh_flush_done_q() will only retry commands for which
scsi_noretry_cmd() returns false.
For a command that has DID_TIME_OUT set, while also having either the
FAILFAST flag set, or the command being a passthrough command,
scsi_noretry_cmd() will return true. Thus, such a command will never be
retried.
Thus, make sure that libata sets SCSI's DID_TIME_OUT flag for commands that
actually timed out (libata's AC_ERR_TIMEOUT flag), such that timed out
commands will once again not be retried if they are also a FAILFAST or
passthrough command.
Cc: stable@vger.kernel.org
Fixes: e5dd410acb34 ("ata: libata: Clear DID_TIME_OUT for ATA PT commands with sense data")
Reported-by: Lai, Yi <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/linux-ide/ZxYz871I3Blsi30F@ly-workstation/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241023105540.1070012-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
A user reported that commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi
device manage_system_start_stop") introduced a spin down + immediate spin
up of the disk both when entering and when resuming from hibernation.
This behavior was not there before, and causes an increased latency both
when entering and when resuming from hibernation.
Hibernation is done by three consecutive PM events, in the following order:
1) PM_EVENT_FREEZE
2) PM_EVENT_THAW
3) PM_EVENT_HIBERNATE
Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") modified ata_eh_handle_port_suspend() to call
ata_dev_power_set_standby() (which spins down the disk), for both event
PM_EVENT_FREEZE and event PM_EVENT_HIBERNATE.
Documentation/driver-api/pm/devices.rst, section "Entering Hibernation",
explicitly mentions that PM_EVENT_FREEZE does not have to be put the device
in a low-power state, and actually recommends not doing so. Thus, let's not
spin down the disk on PM_EVENT_FREEZE. (The disk will instead be spun down
during the subsequent PM_EVENT_HIBERNATE event.)
This way, PM_EVENT_FREEZE will behave as it did before commit aa3998dbeb3a
("ata: libata-scsi: Disable scsi device manage_system_start_stop"), while
PM_EVENT_HIBERNATE will continue to spin down the disk.
This will avoid the superfluous spin down + spin up when entering and
resuming from hibernation, while still making sure that the disk is spun
down before actually entering hibernation.
Cc: stable@vger.kernel.org # v6.6+
Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241008135843.1266244-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix a NULL pointer dereference introduced by the recent cleanups of
the command duration limits feature handling (me)
- Fix incorrect generation of the mode sense data for the
ALL_SUB_MPAGES page (me)
* tag 'ata-6.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: Fix ata_msense_control() CDL page reporting
ata: libata-scsi: Fix ata_msense_control_spgt2()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
|
|
When the user requests the ALL_SUB_MPAGES mode sense page,
ata_msense_control() adds the CDL_T2A_SUB_MPAGE twice instead of adding
the CDL_T2A_SUB_MPAGE and CDL_T2B_SUB_MPAGE pages information. Correct
the second call to ata_msense_control_spgt2() to report the
CDL_T2B_SUB_MPAGE page.
Fixes: 673b2fe6ff1d ("scsi: ata: libata-scsi: Add support for CDL pages mode sense")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
ata_msense_control_spgt2() can be called even for devices that do not
support CDL when the user requests the ALL_SUB_MPAGES mode sense page,
but for such device, this will cause a NULL pointer dereference as
dev->cdl is NULL. Similarly, we should not return any data if
ata_msense_control_spgt2() is called when the user requested the
CDL_T2A_SUB_MPAGE or CDL_T2B_SUB_MPAGE pages for a device that does not
support CDL.
Avoid this potential NULL pointer dereference by checking if the device
support CDL on entry to ata_msense_control_spgt2() and return 0 if it
does not support CDL.
Reported-by: syzbot+37757dc11ee77ef850bb@syzkaller.appspotmail.com
Tested-by: syzbot+37757dc11ee77ef850bb@syzkaller.appspotmail.com
Fixes: 602bcf212637 ("ata: libata: Improve CDL resource management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Convert the qcom AHCI controller DT bindings to DT schema (from
Rayyan)
- Cleanup of libata core and drivers code handling controller and
device quirks to rename "blacklist" to the more neutral "quirk" and
to replace the rarely used "horkage" term with the more common
"quirk" naming (me)
- Add libata-core message to print the quirks applied to a controller
or device (me)
- Remove the not-so-useful function ata_noop_qc_prep() from libata core
(me)
- ahci_imx driver cleanup, improvements and DT bindings compatible
strings update (Richard and Dan)
- libahci_platform improvements (Zhang)
- Remove obsolete functions declarations from libata header files (from
Gaosheng)
- Improve teh ahci_brcm driver using managed device resources funetions
(Zhang)
- Introduce new helper function to improve libata EH code readability
(Niklas)
- Enable module autoloading for the pata_ftide010, pata_ixp4xx and
sata_gemini drivers (Liao)
- Move SATA related functions and data declaraions from libata-core to
libata-sata (me)
- Rename the function handling the sense data for successful NCQ
commands log to better reflect that function actions (me)
- Reduce libata memory usage by moving port resources to struct
ata_device and by optimizing the management of resources for CDL
capable devices (me)
- Improve libata-eh handling of failed ATA passthrough commands
(Niklas)
* tag 'ata-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: (39 commits)
ata: libata: Clear DID_TIME_OUT for ATA PT commands with sense data
ata: libata: Fix W=1 compilation warning
ata: libata: Improve CDL resource management
ata: libata: Introduce ata_dev_free_resources
ata: libata: Move sector_buf from struct ata_port to struct ata_device
ata: libata: Rename ata_eh_read_sense_success_ncq_log()
ata: libata: Move sata_std_hardreset() definition to libata-sata.c
ata: libata: Move sata_down_spd_limit() to libata-sata.c
ata: libata: Improve __ata_qc_complete()
ata: libata-scsi: Improve ata_scsi_handle_link_detach()
ata: libata: Cleanup libata-transport
ata: sata_gemini: Enable module autoloading
ata: pata_ixp4xx: Enable module autoloading
ata: pata_ftide010: Enable module autoloading
ata: libata: Add helper ata_eh_decide_disposition()
ata: ahci_brcm: Use devm_platform_ioremap_resource_byname() helper function
ata: libata: Remove obsolete function declarations
ata: ahci_imx: Fix error code in probe()
ata: libahci_platform: Simplify code with for_each_child_of_node_scoped()
ata: ahci_imx: Correct the email address
...
|
|
Drop legacy acquire/release since we are using pinctrl for this now.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
- add OF ID match table
- drop platform DMA and filters
- change DMA setup to OF, so we can defer probe
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When ata_qc_complete() schedules a command for EH using
ata_qc_schedule_eh(), blk_abort_request() will be called, which leads to
req->q->mq_ops->timeout() / scsi_timeout() being called.
scsi_timeout(), if the LLDD has no abort handler (libata has no abort
handler), will set host byte to DID_TIME_OUT, and then call
scsi_eh_scmd_add() to add the command to EH.
Thus, when commands first enter libata's EH strategy_handler, all the
commands that have been added to EH will have DID_TIME_OUT set.
libata has its own flag (AC_ERR_TIMEOUT), that it sets for commands that
have not received a completion at the time of entering EH.
Thus, libata doesn't really care about DID_TIME_OUT at all, and currently
clears the host byte at the end of EH, in ata_scsi_qc_complete(), before
scsi_eh_finish_cmd() is called.
However, this clearing in ata_scsi_qc_complete() is currently only done
for commands that are not ATA passthrough commands.
Since the host byte is visible in the completion that we return to user
space for ATA passthrough commands, for ATA passthrough commands that got
completed via EH (commands with sense data), the user will incorrectly see:
ATA pass-through(16): transport error: Host_status=0x03 [DID_TIME_OUT]
Fix this by moving the clearing of the host byte (which is currently only
done for commands that are not ATA passthrough commands) from
ata_scsi_qc_complete() to the start of EH (regardless if the command is
ATA passthrough or not).
While at it, use the proper helper function to clear the host byte, rather
than open coding the clearing.
This will make sure that we:
-Correctly clear DID_TIME_OUT for both ATA passthrough commands and
commands that are not ATA passthrough commands.
-Do not needlessly clear the host byte for commands that did not go via EH.
ata_scsi_qc_complete() is called both for commands that are completed
normally (without going via EH), and for commands that went via EH,
however, only commands that went via EH will have DID_TIME_OUT set.
Fixes: 24aeebbf8ea9 ("scsi: ata: libata: Change ata_eh_request_sense() to not set CHECK_CONDITION")
Reported-by: Igor Pylypiv <ipylypiv@google.com>
Closes: https://lore.kernel.org/linux-ide/ZttIN8He8TOZ7Lct@google.com/
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Commit c494708d1f68 ("ata: libata: Cleanup libata-transport")
inadvertently changed the name of the link argument to ata_link in the
kdoc description of ata_tlink_add(), causing warnings to be issue when
compiling with W=1:
drivers/ata/libata-transport.c:690: warning: Function parameter or
struct member 'link' not described in 'ata_tlink_add'
drivers/ata/libata-transport.c:690: warning: Excess function parameter
'ata_link' description in 'ata_tlink_add'
Change the kdoc argument name to "link" to avoid these warnings.
Fixes: c494708d1f68 ("ata: libata: Cleanup libata-transport")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
The ncq_sense_buf buffer field of struct ata_port is allocated and used
only for devices that support the Command Duration Limits (CDL) feature.
However, the cdl buffer of struct ata_device, which is used to cache the
command duration limits log page for devices supporting CDL is always
allocated as part of struct ata_device, which is wasteful of memory for
devices that do not support this feature.
Clean this up by defining both buffers as part of the new ata_cdl
structure and allocating this structure only for devices that support
the CDL feature. This new structure is attached to struct ata_device
using the cdl pointer.
The functions ata_dev_init_cdl_resources() and
ata_dev_cleanup_cdl_resources() are defined to manage this new structure
allocation, initialization and freeing when a port is removed or a
device disabled. ata_dev_init_cdl_resources() is called from
ata_dev_config_cdl() only for devices that support CDL.
ata_dev_cleanup_cdl_resources() is called from ata_dev_free_resources()
to free the ata_cdl structure when a device is being disabled by EH.
Note that the name of the former cdl log buffer of struct ata_device is
changed to desc_log_buf to make it clearer that it is a buffer for the
limit descriptors log page.
This change reduces the size of struct ata_device, thus reducing memory
usage for ATA devices that do not support the CDL feature.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Introduce the function ata_dev_free_resources() to free the resources
allocated to support a device features. For now, this function is
reduced to calling zpodd_exit() for devices that have this feature
enabled.
ata_dev_free_resources() is called from ata_eh_dev_disable() as this
function is always called for all devices attached to a port that is
being detached and for devices that are being disabled due to being
removed (detached) from the system or due to errors.
With this change, the call to zpodd_exit() done in ata_port_detach()
and ata_scsi_handle_link_detach() are removed as these functions
remove all devices attached to the link or port using libata EH, thus
resulting in ata_eh_dev_disable() being called and the zpodd_exit()
function being executed.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
The 512B buffer sector_buf field of struct ata_port is used for scanning
devices as well as during error recovery with ata EH. This buffer is
thus useless if a port does not have a device connected to it.
And also given that commands using this buffer are issued to devices,
and not to ports, move this buffer definition from struct ata_port to
struct ata_device.
This change slightly increases system memory usage for systems using a
port-multiplier as in that case we do not need a per-device buffer for
scanning devices (PMP does not allow parallel scanning) nor for EH (as
when entering EH we are guaranteed that all commands to all devices
connected to the PMP have completed or have been aborted). However,
this change reduces memory usage on systems that have many ports with
only few devices rives connected, which is a much more common use case
than the PMP use case.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
The function ata_eh_read_sense_success_ncq_log() does more that just
reading the sense data for successful NCQ commands log page as it also
sets the sense data for all commands listed in the log page.
Rename this function to ata_eh_get_ncq_success_sense() to better
describe what the function does. Furthermore, since this function is
only called from ata_eh_get_success_sense() in libata-eh.c, there is no
need to export it and its declaration can be moved to
drivers/ata/libata.h.
To be consistent with this change, the function
ata_eh_read_sense_success_non_ncq() is also renamed to
ata_eh_get_non_ncq_success_sense().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
Unlike ata_std_prereset() and ata_std_postreset(), the function
sata_std_hardreset() applies only to SATA devices, as its name implies.
So move its definition to libata-sata.c.
Together with this, also move the definition of sata_port_ops to
libata-sata.c, where it belongs.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
Move the definition of the function sata_down_spd_limit() to
libata-sata.c where it belongs, together with sata_set_spd().
The helper function ata_sstatus_online() is also changed to be an
inline function defined in drivers/ata/libata.h.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
The function __ata_qc_complete() is always called with a qc that already
has been dereferenced and so is guaranteed to be non-NULL (as otherwise
the kernel would have crashed). So remove the warning for a NULL qc as
it is useless.
Furthermore, the qc passed to __ata_qc_complete() must always be marked
as active with the ATA_QCFLAG_ACTIVE flag. If that is not the case, in
addition to the existing warning, return early so that we do not attempt
to complete an invalid qc.
Finally, fix the comment related to clearing the qc active flag as that
operation applies to all devices, not just ATAPI ones.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
A struct ata_device flags should always be set and cleared with the
device port locked. Testing for a flag should thus also be done while
holding the device port lock. In accordance to this principle, modify
ata_scsi_handle_link_detach() to test and clear the ATA_DFLAG_DETACHED
flag while holding the device port lock.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
