summaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)AuthorFilesLines
2015-12-07ata/sata_fsl.c: add ATA_FLAG_NO_LOG_PAGE to blacklist the controller for log ↵Andreas Werner1-1/+2
page reads Every attempt to issue a read log page command lockup the controller. The command is currently sent if the sata device includes the devlsp feature to read out the timing data. This attempt to read the data, locks up the controller and the device is not recognzied correctly (failed to set xfermode) and cannot be accessed. This was found on Freescale P1013/P1022 and T4240 CPUs using a ATP IG mSATA 4GB with the devslp feature. fsl-sata ff718000.sata: Sata FSL Platform/CSB Driver init [ 1.254195] scsi0 : sata_fsl [ 1.256004] ata1: SATA max UDMA/133 irq 74 [ 1.370666] fsl-gianfar ethernet.3: enabled errata workarounds, flags: 0x4 [ 1.470671] fsl-gianfar ethernet.4: enabled errata workarounds, flags: 0x4 [ 1.775584] ata1: Signature Update detected @ 504 msecs [ 1.947594] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.948366] ata1.00: ATA-8: ATP IG mSATA, 20150311, max UDMA/133 [ 1.948371] ata1.00: 7732368 sectors, multi 0: LBA [ 1.948843] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 1.948857] ata1.00: failed to set xfermode (err_mask=0x40) [ 7.467557] ata1: Signature Update detected @ 504 msecs [ 7.639560] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.651320] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 7.651360] ata1.00: failed to set xfermode (err_mask=0x40) [ 7.655628] ata1: limiting SATA link speed to 1.5 Gbps [ 7.659458] ata1.00: limiting speed to UDMA/133:PIO3 [ 13.163554] ata1: Signature Update detected @ 504 msecs [ 13.335558] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.347298] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 13.347334] ata1.00: failed to set xfermode (err_mask=0x40) [ 13.351601] ata1.00: disabled [ 13.353278] ata1: exception Emask 0x50 SAct 0x0 SErr 0x800 action 0x6 frozen t4 [ 13.359281] ata1: SError: { HostInt } [ 13.361644] ata1: hard resetting link Signed-off-by: Andreas Werner <andreas.werner@men.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-12-07libata-eh.c: Introduce new ata port flag for controller which lockup on read ↵Andreas Werner1-0/+8
log page Some controller lockup on a ata_read_log_page. Add new ata port flag ATA_FLAG_NO_LOG_PAGE which can used to blacklist a controller. If this flag is set, any attempt to read a log page returns an error without actually issuing the command. Signed-off-by: Andreas Werner <andreas.werner@men.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-30sata_sil: disable trimMikulas Patocka1-0/+3
When I connect an Intel SSD to SATA SIL controller (PCI ID 1095:3114), any TRIM command results in I/O errors being reported in the log. There is other similar error reported with TRIM and the SIL controller: https://bugs.centos.org/view.php?id=5880 Apparently the controller doesn't support TRIM commands. This patch disables TRIM support on the SATA SIL controller. ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata7.00: BMDMA2 stat 0x50001 ata7.00: failed command: DATA SET MANAGEMENT ata7.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) ata7.00: status: { DRDY ERR } ata7.00: error: { ABRT } ata7.00: device reported invalid CHS sector 0 sd 8:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 8:0:0:0: [sdb] tag#0 Sense Key : Illegal Request [current] [descriptor] sd 8:0:0:0: [sdb] tag#0 Add. Sense: Unaligned write command sd 8:0:0:0: [sdb] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 21 95 88 00 20 00 00 00 00 blk_update_request: I/O error, dev sdb, sector 2200968 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-30AHCI: Fix softreset failed issue of Port MultiplierXiangliang Yu1-0/+9
Current code doesn't update port value of Port Multiplier(PM) when sending FIS of softreset to device, command will fail if FBS is enabled. There are two ways to fix the issue: the first is to disable FBS before sending softreset command to PM device and the second is to update port value of PM when sending command. For the first way, i can't find any related rule in AHCI Spec. The second way can avoid disabling FBS and has better performance. Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2015-11-20sata/mvebu: use #ifdef around suspend/resume codeArnd Bergmann1-0/+5
The newly added suspend/resume implementation for ahci_mvebu causes a link error when CONFIG_PM_SLEEP is disabled: ERROR: "ahci_platform_suspend_host" [drivers/ata/ahci_mvebu.ko] undefined! ERROR: "ahci_platform_resume_host" [drivers/ata/ahci_mvebu.ko] undefined! This adds the same #ifdef here that exists in the ahci_platform driver which defines the above functions. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: d6ecf1581488 ("ata: ahci_mvebu: add suspend/resume support") Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-16ahci: Order SATA device IDs for codename LewisburgAlexandra Yates1-10/+10
This change was to preserve the ascending order of device IDs. There was an exception with the first two Lewisburg device IDs to keep all device IDs of the same kind grouped by code name. Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-16ahci: Add Device ID for Intel Sunrise Point PCHCharles_Rose@Dell.com1-0/+2
This patch adds missing AHCI RAID SATA Device IDs for the Intel Sunrise Point PCH. Signed-off-by: Nanda Kishore Chinna <nanda_kishore_chinna@dell.com> Signed-off-by: Charles Rose <charles_rose@dell.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-3/+0
Pull final round of SCSI updates from James Bottomley: "Sorry for the delay in this patch which was mostly caused by getting the merger of the mpt2/mpt3sas driver, which was seen as an essential item of maintenance work to do before the drivers diverge too much. Unfortunately, this caused a compile failure (detected by linux-next), which then had to be fixed up and incubated. In addition to the mpt2/3sas rework, there are updates from pm80xx, lpfc, bnx2fc, hpsa, ipr, aacraid, megaraid_sas, storvsc and ufs plus an assortment of changes including some year 2038 issues, a fix for a remove before detach issue in some drivers and a couple of other minor issues" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) mpt3sas: fix inline markers on non inline function declarations sd: Clear PS bit before Mode Select. ibmvscsi: set max_lun to 32 ibmvscsi: display default value for max_id, max_lun and max_channel. mptfusion: don't allow negative bytes in kbuf_alloc_2_sgl() scsi: pmcraid: replace struct timeval with ktime_get_real_seconds() mvumi: 64bit value for seconds_since1970 be2iscsi: Fix bogus WARN_ON length check scsi_scan: don't dump trace when scsi_prep_async_scan() is called twice mpt3sas: Bump mpt3sas driver version to 09.102.00.00 mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs mpt2sas, mpt3sas: Update the driver versions mpt3sas: setpci reset kernel oops fix mpt3sas: Added OEM Gen2 PnP ID branding names mpt3sas: Refcount fw_events and fix unsafe list usage mpt3sas: Refcount sas_device objects and fix unsafe list usage mpt3sas: sysfs attribute to report Backup Rail Monitor Status mpt3sas: Ported WarpDrive product SSS6200 support mpt3sas: fix for driver fails EEH, recovery from injected pci bus error mpt3sas: Manage MSI-X vectors according to HBA device type ...
2015-11-10scsi: use host wide tags by defaultChristoph Hellwig1-3/+0
This patch changes the !blk-mq path to the same defaults as the blk-mq I/O path by always enabling block tagging, and always using host wide tags. We've had blk-mq available for a few releases so bugs with this mode should have been ironed out, and this ensures we get better coverage of over tagging setup over different configs. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-04Merge branch 'for-4.3-fixes' into for-4.4Tejun Heo1-0/+1
2015-11-04ahci: add new Intel device IDsAlexandra Yates1-0/+10
Adding Intel codename Lewisburg platform device IDs for SATA. Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-31ahci: Add Marvell 88se91a2 device idJohannes Thumshirn1-0/+2
Add device id for Marvell 88se91a2 Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-31ahci: cleanup ahci_host_activate_multi_irqsDan Williams1-18/+3
With devm there is no need to explicitly free irqs on error. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-31ahci: ahci_host_activate: kill IRQF_SHAREDDan Williams1-1/+1
MSI messages are per-device, so there will never be another "shared" device in the interrupt chain. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-31ahci: qoriq: Disable NCQ on ls2080a SoCTang Yuantian1-1/+7
NCQ feature can't be used due to the erratum A-008473. This patch disables NCQ as a workaround. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-31ahci: qoriq: Rename LS2085A SoC support code to LS2080ATang Yuantian1-3/+3
Freescale is renaming the LS2085A SoC to LS2080A. This patch addresses the same. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-27libata: enable LBA flag in taskfile for ata_scsi_pass_thru()Vinayak Kale1-0/+3
Enable LBA in taskfile flags for ata_scsi_pass_thru() Signed-off-by: Vinayak Kale <vinayak.kale@seagate.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-27libata: add support for NCQ commands for SG interfaceVinayak Kale1-1/+7
This patch is needed to make NCQ commands with FPDMA protocol value (eg READ/WRITE FPDMA) work over SCSI Generic (SG) interface. Signed-off-by: Vinayak Kale <vinayak.kale@seagate.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-15ahci: qoriq: Fix a compiling warningArnd Bergmann1-2/+3
kbuild test robot reports the warnings: drivers/ata/ahci_qoriq.c: In function 'ahci_qoriq_hardreset': >> include/asm-generic/io.h:163:2: warning: 'px_is' may be used >> uninitialized in this function [-Wuninitialized] drivers/ata/ahci_qoriq.c:70:14: note: 'px_is' was declared here >> include/asm-generic/io.h:163:2: warning: 'px_cmd' may be used >> uninitialized in this function [-Wuninitialized] drivers/ata/ahci_qoriq.c:70:6: note: 'px_cmd' was declared here This patch fixed it by introducing a local variable. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-15pata_it821x: use "const char *" for string literalsLABBE Corentin1-3/+3
Some string literals are pointed to by "char *". This patch fixes that. tj: Updated patch title and description. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-12libata: only call ->done once all per-tag ressources are releasedChristoph Hellwig1-9/+13
When calling ->done before releasing resources we could run into a race where the SCSI midlayer sends another command and races with the resources beeing manipulated. For libata this can't currently happen as synchronization happens at a higher level, but I'd still like to fix it to future proof libata and to avoid copy & paste into SCSI drivers where this pattern has led to reproducible crashes. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-04libata: cleanup ata_scsi_qc_completeChristoph Hellwig1-14/+5
Remove an incorrect comment and untangle an if statement in ata_scsi_qc_complete. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-01ata: ahci: find eSATA ports and flag them as removableManuel Lauss3-2/+14
If the AHCI ports' HPCP or ESP bits are set, the port should be considered external (e.g. eSATA) and is marked as removable. Userspace tools like udisks then treat it like an usb drive. With this patch applied, when I plug a drive into the esata port, KDE pops up a window asking what to do with the drives(s), just like it does for any random USB stick. Removability is indicated to the upper layers by way of the SCSI RMB bit, as I haven't found another way to signal userspace to treat a sata disk like any usb stick. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-09-25libata: samsung_cf: fix handling platform_get_irq resultAndrzej Hajda1-1/+1
The function can return negative value. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-09-17ata: pata_macio: Fix module autoload for OF platform driverLuis de Bethencourt1-0/+1
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. This patch adds the missing MODULE_DEVICE_TABLE() for OF to export that information so modules have the correct aliases built-in and autoloading works correctly. Link: https://lkml.org/lkml/2015/7/30/519 Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-09-11ata: pata_pxa: dmaengine conversionRobert Jarzmik1-112/+59
The PXA architecture was offered a slave dmaengine support. As a consequence the direct DMA registers are progressively replaced by dmaengine support. This makes the pata_pxa change, which brings this driver to almost a generic ATA 40-wires driver relying on dmaengine for transfers. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-09-08ahci: added a new driver for supporting Freescale AHCI sataTang Yuantian3-0/+282
Currently Freescale QorIQ series SATA is supported by ahci_platform driver. Some SoC specific settings have been put in uboot. So whether SATA works or not heavily depends on uboot. This patch will add a new driver to support QorIQ sata which removes the dependency on any other boot loader. Freescale QorIQ series sata, like ls1021a ls2085a ls1043a, is compatible with serial ATA 3.0 and AHCI 1.3 specification. Signed-off-by: Yuantian Tang <Yuantian.Tang@freescale.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-09-08Revert "ahci: added support for Freescale AHCI sata"Tang Yuantian1-1/+0
This reverts commit 5163fb62541e ("ahci: added support for Freescale AHCI sata") The reverted patch added Freescale QorIQ AHCI sata support to ahci_platform driver though, but it left SoC specific settings to uboot. It leads to QorIQ sata heavily depending on uboot. In order to removing the dependency we first revert the old patch and then will add a new driver for QorIQ SATA. Since there are no LS* platforms that have been upstreamed, So the revert would not break anything exists. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-09-04Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-2/+1
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.3 for MIPS. Here's the summary: Three fixes that didn't make 4.2-stable: - a -Os build might compile the kernel using the MIPS16 instruction set but the R2 optimized inline functions in <uapi/asm/swab.h> are implemented using 32-bit wide instructions which is invalid. - a build error in pgtable-bits.h for a particular kernel configuration. - accessing registers of the CM GCR might have been compiled to use 64 bit accesses but these registers are onl 32 bit wide. And also a few new bits: - move the ATH79 GPIO driver to drivers/gpio - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h, change ATH79 accordingly. - fix definition of pgprot_writecombine - add an implementation of dma_map_ops.mmap - fix alignment of quiet build output for vmlinuz link - BCM47xx: Use kmemdup rather than duplicating its implementation - Netlogic: Fix 0x0x prefixes of constants. - merge Bjorn Helgaas' series to remove most of the weak keywords from function declarations. - CP0 and CP1 registers are best considered treated as unsigned values to avoid large values from becoming negative values. - improve support for the MIPS GIC timer. - enable common clock framework for Malta and SEAD3. - a number of improvments and fixes to dump_tlb(). - document the MIPS TLB dump functionality in Magic SysRq. - Cavium Octeon CN68XX improvments. - NetLogic improvments. - irq: Use access helper irq_data_get_affinity_mask. - handle MSA unaligned accesses. - a number of R6-related math-emu fixes. - support for I6400. - improvments to MSA support. - add uprobes support. - move from deprecated __initcall to arch_initcall. - remove finish_arch_switch(). - IRQ cleanups by Thomas Gleixner. - migrate to new 'set-state' interface. - random small cleanups" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits) MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16. MIPS: Fix alignment of quiet build output for vmlinuz link MIPS: math-emu: Remove unused handle_dsemul function declaration MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction MIPS: inst.h: Add new MIPS R6 FPU opcodes MIPS: Octeon: Fix management port MII address on Kontron S1901 MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation STAGING: Octeon: Use common helpers for determining interface and port MIPS: Octeon: Support interfaces 4 and 5 MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports MIPS: Octeon: Initialize CN68XX PKO STAGING: Octeon: Support CN68XX style WQE ...
2015-09-03MIPS: Remove all the uses of custom gpio.hAlban Bedel1-2/+1
Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS machines, and each machine type provides its own gpio.h. However only a handful really implement the GPIO API, most just forward everythings to gpiolib. The Alchemy machine is notable as it provides a system to allow implementing the GPIO API at the board level. But it is not used by any board currently supported, so it can also be removed. For most machine types we can just remove the custom gpio.h, as well as the custom wrappers if some exists. Some of the code found in the wrappers must be moved to the respective GPIO driver. A few more fixes are need in some drivers as they rely on linux/gpio.h to provides some machine specific definitions, or used asm/gpio.h instead of linux/gpio.h for the gpio API. Signed-off-by: Alban Bedel <albeu@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Tejun Heo <tj@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Daniel Walter <dwalter@google.com> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: James Hartley <james.hartley@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Varka Bhadram <varkabhadram@gmail.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Michael Buesch <m@bues.ch> Cc: abdoulaye berthe <berthe.ab@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10828/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-02Merge branch 'for-4.3' of ↵Linus Torvalds3-11/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Nothing interesting. A couple device specific minor updates and a kernel doc change" * 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: pata_arasam_cf: Use devm_clk_get libata: fix libata-core.c kernel-doc warning ata: sata_rcar: Remove obsolete sata-r8a779* platform_device_id entries
2015-09-01Merge tag 'pci-v4.3-changes' of ↵Linus Torvalds2-24/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.3 merge window: Enumeration: - Allocate ATS struct during enumeration (Bjorn Helgaas) - Embed ATS info directly into struct pci_dev (Bjorn Helgaas) - Reduce size of ATS structure elements (Bjorn Helgaas) - Stop caching ATS Invalidate Queue Depth (Bjorn Helgaas) - iommu/vt-d: Cache PCI ATS state and Invalidate Queue Depth (Bjorn Helgaas) - Move MPS configuration check to pci_configure_device() (Bjorn Helgaas) - Set MPS to match upstream bridge (Keith Busch) - ARM/PCI: Set MPS before pci_bus_add_devices() (Murali Karicheri) - Add pci_scan_root_bus_msi() (Lorenzo Pieralisi) - ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() (Lorenzo Pieralisi) Resource management: - Call pci_read_bridge_bases() from core instead of arch code (Lorenzo Pieralisi) PCI device hotplug: - pciehp: Remove unused interrupt events (Bjorn Helgaas) - pciehp: Remove ignored MRL sensor interrupt events (Bjorn Helgaas) - pciehp: Handle invalid data when reading from non-existent devices (Jarod Wilson) - pciehp: Simplify pcie_poll_cmd() (Yijing Wang) - Use "slot" and "pci_slot" for struct hotplug_slot and struct pci_slot (Yijing Wang) - Protect pci_bus->slots with pci_slot_mutex, not pci_bus_sem (Yijing Wang) - Hold pci_slot_mutex while searching bus->slots list (Yijing Wang) Power management: - Disable async suspend/resume for JMicron multi-function SATA/AHCI (Zhang Rui) Virtualization: - Add ACS quirks for Intel I219-LM/V (Alex Williamson) - Restore ACS configuration as part of pci_restore_state() (Alexander Duyck) MSI: - Add pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu) - x86: Implement pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu) - Add helpers to manage pci_dev->irq and pci_dev->irq_managed (Jiang Liu) - Free legacy IRQ when enabling MSI/MSI-X (Jiang Liu) - ARM/PCI: Remove msi_controller from struct pci_sys_data (Lorenzo Pieralisi) - Remove unused pcibios_msi_controller() hook (Lorenzo Pieralisi) Generic host bridge driver: - Remove dependency on ARM-specific struct hw_pci (Jayachandran C) - Build setup-irq.o for arm64 (Jayachandran C) - Add arm64 support (Jayachandran C) APM X-Gene host bridge driver: - Add APM X-Gene PCIe 64-bit prefetchable window (Duc Dang) - Add support for a 64-bit prefetchable memory window (Duc Dang) - Drop owner assignment from platform_driver (Krzysztof Kozlowski) Broadcom iProc host bridge driver: - Allow BCMA bus driver to be built as module (Hauke Mehrtens) - Delete unnecessary checks before phy calls (Markus Elfring) - Add arm64 support (Ray Jui) Synopsys DesignWare host bridge driver: - Don't complain missing *config* reg space if va_cfg0 is set (Murali Karicheri) TI DRA7xx host bridge driver: - Disable pm_runtime on get_sync failure (Kishon Vijay Abraham I) - Add PM support (Kishon Vijay Abraham I) - Clear MSE bit during suspend so clocks will idle (Kishon Vijay Abraham I) - Add support to make GPIO drive PERST# line (Kishon Vijay Abraham I) Xilinx AXI host bridge driver: - Check for MSI interrupt flag before handling as INTx (Russell Joyce) Miscellaneous: - Fix Intersil/Techwell TW686[4589] AV capture class code (Krzysztof Hałasa) - Use PCI_CLASS_SERIAL_USB instead of bare number (Bjorn Helgaas) - Fix generic NCR 53c810 class code quirk (Bjorn Helgaas) - Fix TI816X class code quirk (Bjorn Helgaas) - Remove unused "pci_probe" flags (Bjorn Helgaas) - Host bridge driver code simplifications (Fabio Estevam) - Add dev_flags bit to access VPD through function 0 (Mark Rustad) - Add VPD function 0 quirk for Intel Ethernet devices (Mark Rustad) - Kill off set_irq_flags() usage (Rob Herring) - Remove Intel Cherrytrail D3 delays (Srinidhi Kasagar) - Clean up pci_find_capability() (Wei Yang)" * tag 'pci-v4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (72 commits) PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI PCI: Set MPS to match upstream bridge PCI: Move MPS configuration check to pci_configure_device() PCI: Drop references acquired by of_parse_phandle() PCI/MSI: Remove unused pcibios_msi_controller() hook ARM/PCI: Remove msi_controller from struct pci_sys_data ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() PCI: Add pci_scan_root_bus_msi() ARM/PCI: Replace panic with WARN messages on failures PCI: generic: Add arm64 support PCI: Build setup-irq.o for arm64 PCI: generic: Remove dependency on ARM-specific struct hw_pci PCI: imx6: Simplify a trivial if-return sequence PCI: spear: Use BUG_ON() instead of condition followed by BUG() PCI: dra7xx: Remove unneeded use of IS_ERR_VALUE() PCI: Remove pci_ats_enabled() PCI: Stop caching ATS Invalidate Queue Depth PCI: Move ATS declarations to linux/pci.h so they're all together PCI: Clean up ATS error handling PCI: Use pci_physfn() rather than looking up physfn by hand ...
2015-08-28Merge branch 'for-4.2-fixes' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixlet from Tejun Heo: "Simple blacklist entry addition" * 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: Add factory recertified Crucial M500s to blacklist
2015-08-26Add factory recertified Crucial M500s to blacklistGuillermo A. Amaral1-0/+2
The Crucial M500 is known to have issues with queued TRIM commands, the factory recertified SSDs use a different model number naming convention which causes them to get ignored by the blacklist. The new naming convention boils down to: s/Crucial_/FC/ Signed-off-by: Guillermo A. Amaral <g@maral.me> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2015-08-24PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCIZhang Rui2-24/+1
On multi-function JMicron SATA/PATA/AHCI devices, the PATA controller at function 1 doesn't work if it is powered on before the SATA controller at function 0. The result is that PATA doesn't work after resume, and we print messages like this: pata_jmicron 0000:02:00.1: Refused to change power state, currently in D3 irq 17: nobody cared (try booting with the "irqpoll" option) Async resume was introduced in v3.15 by 76569faa62c4 ("PM / sleep: Asynchronous threads for resume_noirq"). Prior to that, we powered on the functions in order, so this problem shouldn't happen. e6b7e41cdd8c ("ata: Disabling the async PM for JMicron chip 363/361") solved the problem for JMicron 361 and 363 devices. With async suspend disabled, we always power on function 0 before function 1. Barto then reported the same problem with a JMicron 368 (see comment #57 in the bugzilla). Rather than extending the blacklist piecemeal, disable async suspend for all JMicron multi-function SATA/PATA/AHCI devices. This quirk could stay in the ahci and pata_jmicron drivers, but it's likely the problem will occur even if pata_jmicron isn't loaded until after the suspend/resume. Making it a PCI quirk ensures that we'll preserve the power-on order even if the drivers aren't loaded. [bhelgaas: changelog, limit to multi-function, limit to IDE/ATA] Link: https://bugzilla.kernel.org/show_bug.cgi?id=81551 Reported-and-tested-by: Barto <mister.freeman@laposte.net> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.15+
2015-08-22ata: pata_arasam_cf: Use devm_clk_getVaishali Thakkar1-7/+4
This patch introduces the use of managed resource function devm_clk_get instead of clk_get and removes corresponding call to clk_put in the remove function. To be compatible with the change various gotos are replaced with direct returns, and unneeded label is dropped. Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-08-18Merge branch 'for-4.2-fixes' of ↵Linus Torvalds6-154/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Three minor device-specific fixes and revert of NCQ autosense added during this -rc1. It turned out that NCQ autosense as currently implemented interferes with the usual error handling behavior. It will be revisited in the near future" * 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: ahci_brcmstb: Fix misuse of IS_ENABLED sata_sx4: Check return code from pdc20621_i2c_read() Revert "libata: Implement NCQ autosense" Revert "libata: Implement support for sense data reporting" Revert "libata-eh: Set 'information' field for autosense" ata: ahci_brcmstb: Fix warnings with CONFIG_PM_SLEEP=n
2015-08-10libata: fix libata-core.c kernel-doc warningRandy Dunlap1-0/+1
Fix kernel-doc warning in libata-core.c: Warning(..//drivers/ata/libata-core.c:4763): No description found for parameter 'tag' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-08-06ata: ahci_brcmstb: Fix misuse of IS_ENABLEDAxel Lin1-2/+2
While IS_ENABLED() is perfectly fine for CONFIG_* symbols, it is not for other symbols such as __BIG_ENDIAN that is provided directly by the compiler. Switch to use CONFIG_CPU_BIG_ENDIAN instead of __BIG_ENDIAN. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2015-08-06sata_sx4: Check return code from pdc20621_i2c_read()Tomer Barletz1-4/+12
The variable spd0 might be used uninitialized when pdc20621_i2c_read() fails. This also generates a compilation warning with gcc 5.1. tj: use pr_err() Signed-off-by: Tomer Barletz <barletz@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-08-03Revert "libata: Implement NCQ autosense"Tejun Heo3-26/+2
This reverts commit 42b966fbf35da9c87f08d98f9b8978edf9e717cf. As implemented, ACS-4 sense reporting for ATA devices bypasses error diagnosis and handling in libata degrading EH behavior significantly. Revert the related changes for now. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org #v4.1+
2015-08-03Revert "libata: Implement support for sense data reporting"Tejun Heo2-102/+4
This reverts commit fe7173c206de63fc28475ee6ae42ff95c05692de. As implemented, ACS-4 sense reporting for ATA devices bypasses error diagnosis and handling in libata degrading EH behavior significantly. Revert the related changes for now. ATA_ID_COMMAND_SET_3/4 constants are not reverted as they're used by later changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org #v4.1+
2015-08-03Revert "libata-eh: Set 'information' field for autosense"Tejun Heo4-21/+3
This reverts commit a1524f226a02aa6edebd90ae0752e97cfd78b159. As implemented, ACS-4 sense reporting for ATA devices bypasses error diagnosis and handling in libata degrading EH behavior significantly. Revert the related changes for now. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org #v4.1+
2015-07-28ata: ahci_brcmstb: Fix warnings with CONFIG_PM_SLEEP=nFlorian Fainelli1-0/+2
When CONFIG_PM_SLEEP is disabled, brcm_ahci_{suspend,resume} are not used, which causes such a build warning to occur: CC drivers/ata/ahci_brcmstb.o drivers/ata/ahci_brcmstb.c:212:12: warning: 'brcm_ahci_suspend' defined but not used [-Wunused-function] static int brcm_ahci_suspend(struct device *dev) ^ drivers/ata/ahci_brcmstb.c:224:12: warning: 'brcm_ahci_resume' defined but not used [-Wunused-function] static int brcm_ahci_resume(struct device *dev) ^ LD drivers/ata/built-in.o Fixes: 766a2d979632 ("ata: add Broadcom AHCI SATA3 driver for STB chips") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-07-25Merge branch 'for-4.2-fixes' of ↵Linus Torvalds4-4/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "A couple important fixes. - A block layer change which removed restriction on max transfer size led to silent data corruption on some devices. A new quirk is added to restore the old size limit for the reported device. If it gets reported on more devices, we might have to consider restoring the restriction for ATA devices by default. - There finally is a SSD which is confirmed to cause data corruption on TRIM regardless of which flavor is used. A new quirk is added and the device is blacklisted - Other device-specific workarounds" * 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: Do not blacklist M510DC libata: increase the timeout when setting transfer mode libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit libata: force disable trim for SuperSSpeed S238 libata: add ATA_HORKAGE_NOTRIM libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER ata: pmp: add quirk for Marvell 4140 SATA PMP
2015-07-18Update Viresh Kumar's email addressViresh Kumar1-2/+2
Switch to my kernel.org alias instead of a badly named gmail address, which I rarely use. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-16libata: Do not blacklist M510DCMartin K. Petersen1-1/+1
A new Micron drive was just announced, once again recycling the first part of the model string. Add an underscore to the M510/M550 pattern to avoid picking up the new DC drive. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-07-15libata: increase the timeout when setting transfer modeMikulas Patocka1-1/+2
I have a ST4000DM000 disk. If Linux is booted while the disk is spun down, the command that sets transfer mode causes the disk to spin up. The spin-up takes longer than the default 5s timeout, so the command fails and timeout is reported. Fix this by increasing the timeout to 15s, which is enough for the disk to spin up. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2015-07-15libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors ↵David Milburn1-0/+10
limit Since no longer limiting max_sectors to BLK_DEF_MAX_SECTORS (commit 34b48db66e08), data corruption may occur on ST380013AS drive configured on 82801JI (ICH10 Family) SATA controller. This patch will allow the driver to limit max_sectors as before # cat /sys/block/sdb/queue/max_sectors_kb 512 I was able to double the max_sectors_kb value up to 16384 on linux-4.2.0-rc2 before seeing corruption, but seems safer to use previous limit. Without this patch max_sectors_kb will be 32767. tj: Minor comment update. Reported-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org # v3.19 and later Fixes: 34b48db66e08 ("block: remove artifical max_hw_sectors cap")
2015-07-15libata: force disable trim for SuperSSpeed S238Arne Fitzenreiter1-0/+3
This device loses blocks, often the partition table area, on trim. Disable TRIM. http://pcengines.ch/msata16a.htm Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org