| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This may run from a kernel thread via device_add_disk(). So this could
also use __fput_sync() if we were worried about EBUSY. But when it is
called from a kernel thread it's always BLK_OPEN_READ so EBUSY can't
really happen even if we do BLK_OPEN_RESTRICT_WRITES or BLK_OPEN_EXCL.
Otherwise it's called from an ioctl on the block device which is only
called from userspace and can rely on task work.
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-3-adbd023e19cc@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-2-adbd023e19cc@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add two new helpers to allow opening block devices as files.
This is not the final infrastructure. This still opens the block device
before opening a struct a file. Until we have removed all references to
struct bdev_handle we can't switch the order:
* Introduce blk_to_file_flags() to translate from block specific to
flags usable to pen a new file.
* Introduce bdev_file_open_by_{dev,path}().
* Introduce temporary sb_bdev_handle() helper to retrieve a struct
bdev_handle from a block device file and update places that directly
reference struct bdev_handle to rely on it.
* Don't count block device openes against the number of open files. A
bdev_file_open_by_{dev,path}() file is never installed into any
file descriptor table.
One idea that came to mind was to use kernel_tmpfile_open() which
would require us to pass a path and it would then call do_dentry_open()
going through the regular fops->open::blkdev_open() path. But then we're
back to the problem of routing block specific flags such as
BLK_OPEN_RESTRICT_WRITES through the open path and would have to waste
FMODE_* flags every time we add a new one. With this we can avoid using
a flag bit and we have more leeway in how we open block devices from
bdev_open_by_{dev,path}().
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-1-adbd023e19cc@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The SLAB_MEM_SPREAD flag is already a no-op as of 6.8-rc1, remove
its usage so we can delete it from slab. No functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20240224134646.829105-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The logic in blk_mq_complete_need_ipi() assumes SMP systems where all
CPUs have equal compute capacities and only LLC cache can make
a different on perceived performance. But this assumption falls apart on
HMP systems where LLC is shared, but the CPUs have different capacities.
Staying local then can have a big performance impact if the IO request
was done from a CPU with higher capacity but the interrupt is serviced
on a lower capacity CPU.
Use the new cpus_equal_capacity() function to check if we need to send
an IPI.
Without the patch I see the BLOCK softirq always running on little cores
(where the hardirq is serviced). With it I can see it running on all
cores.
This was noticed after the topology change [1] where now on a big.LITTLE
we truly get that the LLC is shared between all cores where as in the
past it was being misrepresented for historical reasons. The logic
exposed a missing dependency on capacities for such systems where there
can be a big performance difference between the CPUs.
This of course introduced a noticeable change in behavior depending on
how the topology is presented. Leading to regressions in some workloads
as the performance of the BLOCK softirq on littles can be noticeably
worse on some platforms.
Worth noting that we could have checked for capacities being greater
than or equal instead for equality. This will lead to favouring higher
performance always. But opted for equality instead to match the
performance of the requester without making an assumption that can lead
to power trade-offs which these systems tend to be sensitive about. If
the requester would like to run faster, it's better to rely on the
scheduler to give the IO requester via some facility to run on a faster
core; and then if the interrupt triggered on a CPU with different
capacity we'll make sure to match the performance the requester is
supposed to run at.
[1] https://lpc.events/event/16/contributions/1342/attachments/962/1883/LPC-2022-Android-MC-Phantom-Domains.pdf
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240223155749.2958009-3-qyousef@layalina.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some of these block operations can access a significant capacity and
take longer than the user expected. A user may change their mind about
wanting to run that command and attempt to kill the process and do
something else with their device. But since the task is uninterruptable,
they have to wait for it to finish, which could be many hours.
Check for a fatal signal at each iteration so the user doesn't have to
wait for their regretted operation to complete naturally.
Reported-by: Conrad Meyer <conradmeyer@meta.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240223155910.3622666-5-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is the same in two places, and another will be added soon. Create a
helper for it.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240223155910.3622666-4-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use min to calculate the next number of sectors like everyone else.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240223155910.3622666-3-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use consistent coding style in this file. All the other loops for the
same purpose use "while (nr_sects)", so they win.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240223155910.3622666-2-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
'open_mutex' of gendisk is used to protect open/close block devices. But
in bd_link_disk_holder(), it is used to protect the creation of symlink
between holding disk and slave bdev, which introduces some issues.
When bd_link_disk_holder() is called, the driver is usually in the process
of initialization/modification and may suspend submitting io. At this
time, any io hold 'open_mutex', such as scanning partitions, can cause
deadlocks. For example, in raid:
T1 T2
bdev_open_by_dev
lock open_mutex [1]
...
efi_partition
...
md_submit_bio
md_ioctl mddev_syspend
-> suspend all io
md_add_new_disk
bind_rdev_to_array
bd_link_disk_holder
try lock open_mutex [2]
md_handle_request
-> wait mddev_resume
T1 scan partition, T2 add a new device to raid. T1 waits for T2 to resume
mddev, but T2 waits for open_mutex held by T1. Deadlock occurs.
Fix it by introducing a local mutex 'blk_holder_mutex' to replace
'open_mutex'.
Fixes: 1b0a2d950ee2 ("md: use new apis to suspend array for ioctls involed array reconfiguration")
Reported-by: mgperkow@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218459
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240221090122.1281868-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The block zone code does not use RB-tree. So remove the include of
linux/rbtree.h as it is not needed.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240222131724.1803520-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Device mapper may create a non-zoned mapped device out of a zoned device
(e.g., the dm-zoned target). In such case, some queue limit such as the
max_zone_append_sectors and zone_write_granularity endup being non zero
values for a block device that is not zoned. Avoid this by clearing
these limits in blk_stack_limits() when the stacked zoned limit is
false.
Fixes: 3093a479727b ("block: inherit the zoned characteristics in blk_stack_limits")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240222131724.1803520-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't set the default max_segment_size value when a virt_boundary is
used.
Fixes: d690cb8ae14b ("block: add an API to atomically update queue limits")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240221125010.3609444-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass a queue_limits to blk_alloc_disk and apply it if non-NULL. This
will allow allocating queues with valid queue limits instead of setting
the values one at a time later.
Also change blk_alloc_disk to return an ERR_PTR instead of just NULL
which can't distinguish errors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20240215071055.2201424-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The SED Opal response parsing function response_parse() does not
handle the case of an empty atom in the response. This causes
the entry count to be too high and the response fails to be
parsed. Recognizing, but ignoring, empty atoms allows response
handling to succeed.
Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Link: https://lore.kernel.org/r/20240216210417.3526064-2-gjoyce@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass a queue_limits to blk_mq_alloc_disk and apply it if non-NULL. This
will allow allocating queues with valid queue limits instead of setting
the values one at a time later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass a queue_limits to blk_mq_init_queue and apply it if non-NULL. This
will allow allocating queues with valid queue limits instead of setting
the values one at a time later.
Also rename the function to blk_mq_alloc_queue as that is a much better
name for a function that allocates a queue and always pass the queuedata
argument instead of having a separate version for the extra argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass a queue_limits to blk_alloc_queue and apply it after validating and
capping the values using blk_validate_limits. This will allow allocating
queues with valid queue limits instead of setting the values one at a
time later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert queue_discard_max_store to use queue_limits_commit_update to
check and update the max_discard_sectors limit and freeze the queue
before doing so to ensure we don't have requests in flight while
changing the limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new max_user_discard_sectors limit that mirrors max_user_sectors
and stores the value that the user manually set. This now allows
updates of the max_hw_discard_sectors to not worry about the user
limit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert queue_max_sectors_store to use queue_limits_commit_update to
check and update the max_sectors limit and freeze the queue before
doing so to ensure we don't have requests in flight while changing
the limits.
Note that this removes the previously held queue_lock that doesn't
protect against any other reader or writer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new queue_limits_{start,commit}_update pair of functions that
allows taking an atomic snapshot of queue limits, update it, and
commit it if it passes validity checking. Also use the low-level
validation helper to implement blk_set_default_limits instead of
duplicating the initialization.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_set_stacking_limits uses very little from blk_set_default_limits.
Open code these initializations in preparation for rewriting
blk_set_default_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out a blk_apply_bdi_limits limits helper that can be used with
an explicit queue_limits argument, which will be useful later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Block layer integrity processing assumes that protection information
(PI) is placed in the first bytes of each metadata block.
Remove this limitation and include the metadata before the PI in the
calculation of the guard tag.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Chinmay Gameti <c.gameti@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240201130126.211402-3-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Allow computation using the existing guard value.
This is a prep patch.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240201130126.211402-2-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that all callers pass in GFP_KERNEL to blkdev_zone_mgmt() and use
memalloc_no{io,fs}_{save,restore}() to define the allocation scope, we can
drop the gfp_mask parameter from blkdev_zone_mgmt() as well as
blkdev_zone_reset_all() and blkdev_zone_reset_all_emulated().
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20240128-zonefs_nofs-v3-5-ae3b7c8def61@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240131094323.146659-1-chentao@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When enlisting a bio into ->free_list_irq we protect the list by
disabling irqs. It's likely they're already disabled and performance of
local_irq_{save,restore}() is decent, but it's not zero cost.
Let's only use the irq cache when when we're serving a hard irq, which
allows to remove local_irq_{save,restore}(), and fall back to bio_free()
in all left cases.
Profiles indicate that the bio_put() cost is reduced by ~3.5 times
(1.76% -> 0.49%), and total throughput of a CPU bound benchmark improve
by around 1% (t/io_uring with high QD and several drives).
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/36d207540b7046c653cc16e5ff08fe7234b19f81.1707314970.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_put_percpu_cache() puts all non-iopoll bios into the irq-safe list,
which entails disabling irqs. The overhead of that is not that bad when
interrupts are already off but getting worse otherwise. We can optimise
it when we're in the task context by using ->free_list directly just as
the IOPOLL path does.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4774e1a0f905f96c63174b0f3e4f79f0d9b63246.1707314970.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When iocg_kick_delay() is called from a CPU different than the one which set
the delay, @now may be in the past of @iocg->delay_at leading to the
following warning:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1359:23
shift exponent 18446744073709 is too large for 64-bit type 'u64' (aka 'unsigned long long')
...
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xc0
__ubsan_handle_shift_out_of_bounds+0x2ab/0x300
iocg_kick_delay+0x222/0x230
ioc_rqos_merge+0x1d7/0x2c0
__rq_qos_merge+0x2c/0x80
bio_attempt_back_merge+0x83/0x190
blk_attempt_plug_merge+0x101/0x150
blk_mq_submit_bio+0x2b1/0x720
submit_bio_noacct_nocheck+0x320/0x3e0
__swap_writepage+0x2ab/0x9d0
The underflow itself doesn't really affect the behavior in any meaningful
way; however, the past timestamp may exaggerate the delay amount calculated
later in the code, which shouldn't be a material problem given the nature of
the delay mechanism.
If @now is in the past, this CPU is racing another CPU which recently set up
the delay and there's nothing this CPU can contribute w.r.t. the delay.
Let's bail early from iocg_kick_delay() in such cases.
Reported-by: Breno Leitão <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5160a5a53c0c ("blk-iocost: implement delay adjustment hysteresis")
Link: https://lore.kernel.org/r/ZVvc9L_CYk5LO1fT@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The detection of dirty-throttled tasks in blk-wbt has been subtly broken
since its beginning in 2016. Namely if we are doing cgroup writeback and
the throttled task is not in the root cgroup, balance_dirty_pages() will
set dirty_sleep for the non-root bdi_writeback structure. However
blk-wbt checks dirty_sleep only in the root cgroup bdi_writeback
structure. Thus detection of recently throttled tasks is not working in
this case (we noticed this when we switched to cgroup v2 and suddently
writeback was slow).
Since blk-wbt has no easy way to get to proper bdi_writeback and
furthermore its intention has always been to work on the whole device
rather than on individual cgroups, just move the dirty_sleep timestamp
from bdi_writeback to backing_dev_info. That fixes the checking for
recently throttled task and saves memory for everybody as a bonus.
CC: stable@vger.kernel.org
Fixes: b57d74aff9ab ("writeback: track if we're sleeping on progress in balance_dirty_pages()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240123175826.21452-1-jack@suse.cz
[axboe: fixup indentation errors]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Restore support for passing data lifetime information from filesystems to
block drivers. This patch reverts commit b179c98f7697 ("block: Remove
request.write_hint") and commit c75e707fe1aa ("block: remove the
per-bio/request write hint").
This patch does not modify the size of struct bio because the new
bi_write_hint member fills a hole in struct bio. pahole reports the
following for struct bio on an x86_64 system with this patch applied:
/* size: 112, cachelines: 2, members: 20 */
/* sum members: 110, holes: 1, sum holes: 2 */
/* last cacheline: 48 bytes */
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240202203926.2478590-7-bvanassche@acm.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
After calling throtl_peek_queued(), the data direction can be determined so
there is no need to call bio_data_dir() to check the direction again.
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240123081248.3752878-1-yizhou.tang@shopee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Mark the task as having a cached timestamp when set assign it, so we
can efficiently check if it needs updating post being scheduled back in.
This covers both the actual schedule out case, which would've flushed
the plug, and the preemption case which doesn't touch the plugged
requests (for many reasons, one of them being then we'd need to have
preemption disabled around plug state manipulation).
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Querying the current time is the most costly thing we do in the block
layer per IO, and depending on kernel config settings, we may do it
many times per IO.
None of the callers actually need nsec granularity. Take advantage of
that by caching the current time in the plug, with the assumption here
being that any time checking will be temporally close enough that the
slight loss of precision doesn't matter.
If the block plug gets flushed, eg on preempt or schedule out, then
we invalidate the cached clock.
On a basic peak IOPS test case with iostats enabled, this changes
the performance from:
IOPS=108.41M, BW=52.93GiB/s, IOS/call=31/31
IOPS=108.43M, BW=52.94GiB/s, IOS/call=32/32
IOPS=108.29M, BW=52.88GiB/s, IOS/call=31/32
IOPS=108.35M, BW=52.91GiB/s, IOS/call=32/32
IOPS=108.42M, BW=52.94GiB/s, IOS/call=31/31
IOPS=108.40M, BW=52.93GiB/s, IOS/call=32/32
IOPS=108.31M, BW=52.89GiB/s, IOS/call=32/31
to
IOPS=118.79M, BW=58.00GiB/s, IOS/call=31/32
IOPS=118.62M, BW=57.92GiB/s, IOS/call=31/31
IOPS=118.80M, BW=58.01GiB/s, IOS/call=32/31
IOPS=118.78M, BW=58.00GiB/s, IOS/call=32/32
IOPS=118.69M, BW=57.95GiB/s, IOS/call=32/31
IOPS=118.62M, BW=57.92GiB/s, IOS/call=32/31
IOPS=118.63M, BW=57.92GiB/s, IOS/call=31/32
which is more than a 9% improvement in performance. Looking at perf diff,
we can see a huge reduction in time overhead:
10.55% -9.88% [kernel.vmlinux] [k] read_tsc
1.31% -1.22% [kernel.vmlinux] [k] ktime_get
Note that since this relies on blk_plug for the caching, it's only
applicable to the issue side. But this is where most of the time calls
happen anyway. On the completion side, cached time stamping is done with
struct io_comp patch, as long as the driver supports it.
It's also worth noting that the above testing doesn't enable any of the
higher cost CPU items on the block layer side, like wbt, cgroups,
iocost, etc, which all would add additional time querying and hence
overhead. IOW, results would likely look even better in comparison with
those enabled, as distros would do.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert any user of ktime_get_ns() to use blk_time_get_ns(), and
ktime_get() to blk_time_get(), so we have a unified API for querying the
current time in nanoseconds or as ktime.
No functional changes intended, this patch just wraps ktime_get_ns()
and ktime_get() with a block helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for moving time keeping into blk.h, move the cgroup
related code for timestamps in here too. This will help avoid a circular
dependency, and also moves it into a more appropriate header as this one
is private to the block layer code.
Leave struct bio_issue in blk_types.h as it's a proper time definition.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Share the main merge / split / integrity preparation code between the
cached request vs newly allocated request cases, and add comments
explaining the cached request handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240124092658.2258309-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new helper to check if there is suitable cached request in
blk_mq_submit_bio. This removes open coded logic in blk_mq_submit_bio
and moves some checks that so far are in blk_mq_use_cached_rq to
be performed earlier. This avoids the case where we first do check
with the cached request but then later end up allocating a new one
anyway and need to grab a queue reference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240124092658.2258309-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_attempt_bio_merge has nothing to do with allocating a new
request, it avoids allocating a new request. Move the call out of
blk_mq_get_new_requests and into the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240124092658.2258309-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 82b74cac2849 ("blk-ioprio: Convert from rqos policy to direct
call") pushed setting bio I/O priority down into blk_mq_submit_bio()
-- which is too low within block core's submit_bio() because it
skips setting I/O priority for block drivers that implement
fops->submit_bio() (e.g. DM, MD, etc).
Fix this by moving bio_set_ioprio() up from blk-mq.c to blk-core.c and
call it from submit_bio(). This ensures all block drivers call
bio_set_ioprio() during initial bio submission.
Fixes: a78418e6a04c ("block: Always initialize bio IO priority on submit")
Co-developed-by: Yibin Ding <yibin.ding@unisoc.com>
Signed-off-by: Yibin Ding <yibin.ding@unisoc.com>
Signed-off-by: Hongyu Jin <hongyu.jin@unisoc.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
[snitzer: revised commit header]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240130202638.62600-2-snitzer@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Let the file system know how much dirty data exists at the passed
in offset. This allows file systems to allocate the right amount
of space that actually is written back if they can't eagerly
convert (e.g. because they don't support unwritten extents).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-15-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Syzkaller reports a warning in _copy_from_iter because an
iov_iter is supposedly used in the wrong direction. The reason
is that syzcaller managed to generate a request with
a transfer direction of SG_DXFER_TO_FROM_DEV. This instructs
the kernel to copy user buffers into the kernel, read into
the copied buffers and then copy the data back to user space.
Thus the iovec is used in both directions.
Detect this situation in the block layer and construct a new
iterator with the correct direction for the copy-in.
Reported-by: syzbot+a532b03fdfee2c137666@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/0000000000009b92c10604d7a5e9@google.com/t/
Reported-by: syzbot+63dec323ac56c28e644f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/0000000000003faaa105f6e7c658@google.com/T/
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240121202634.275068-1-lk@c--e.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 1a721de8489f ("block: don't add or resize partition on the disk
with GENHD_FL_NO_PART") prevented all operations about partitions on disks
with GENHD_FL_NO_PART in blkpg_do_ioctl() since they are meaningless.
However, it changed error code in some scenarios. So move checking
GENHD_FL_NO_PART to bdev_add_partition() to eliminate impact.
Fixes: 1a721de8489f ("block: don't add or resize partition on the disk with GENHD_FL_NO_PART")
Reported-by: Allison Karlitskaya <allison.karlitskaya@redhat.com>
Closes: https://lore.kernel.org/all/CAOYeF9VsmqKMcQjo1k6YkGNujwN-nzfxY17N3F-CMikE1tYp+w@mail.gmail.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240118130401.792757-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- tcp, fc, and rdma target fixes (Maurizio, Daniel, Hannes,
Christoph)
- discard fixes and improvements (Christoph)
- timeout debug improvements (Keith, Max)
- various cleanups (Daniel, Max, Giuxen)
- trace event string fixes (Arnd)
- shadow doorbell setup on reset fix (William)
- a write zeroes quirk for SK Hynix (Jim)
- MD pull request via Song:
- Sparse warning since v6.0 (Bart)
- /proc/mdstat regression since v6.7 (Yu Kuai)
- Use symbolic error value (Christian)
- IO Priority documentation update (Christian)
- Fix for accessing queue limits without having entered the queue
(Christoph, me)
- Fix for loop dio support (Christoph)
- Move null_blk off deprecated ida interface (Christophe)
- Ensure nbd initializes full msghdr (Eric)
- Fix for a regression with the folio conversion, which is now easier
to hit because of an unrelated change (Matthew)
- Remove redundant check in virtio-blk (Li)
- Fix for a potential hang in sbitmap (Ming)
- Fix for partial zone appending (Damien)
- Misc changes and fixes (Bart, me, Kemeng, Dmitry)
* tag 'for-6.8/block-2024-01-18' of git://git.kernel.dk/linux: (45 commits)
Documentation: block: ioprio: Update schedulers
loop: fix the the direct I/O support check when used on top of block devices
blk-mq: Remove the hctx 'run' debugfs attribute
nbd: always initialize struct msghdr completely
block: Fix iterating over an empty bio with bio_for_each_folio_all
block: bio-integrity: fix kcalloc() arguments order
virtio_blk: remove duplicate check if queue is broken in virtblk_done
sbitmap: remove stale comment in sbq_calc_wake_batch
block: Correct a documentation comment in blk-cgroup.c
null_blk: Remove usage of the deprecated ida_simple_xx() API
block: ensure we hold a queue reference when using queue limits
blk-mq: rename blk_mq_can_use_cached_rq
block: print symbolic error name instead of error code
blk-mq: fix IO hang from sbitmap wakeup race
nvmet-rdma: avoid circular locking dependency on install_queue()
nvmet-tcp: avoid circular locking dependency on install_queue()
nvme-pci: set doorbell config before unquiescing
block: fix partial zone append completion handling in req_bio_endio()
block/iocost: silence warning on 'last_period' potentially being unused
md/raid1: Use blk_opf_t for read and write operations
...
|
|
Nobody uses the debugfs hctx 'run' attribute. Hence remove this
attribute and also the code that updates the corresponding member
variable.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Cc: Gabriel Ryan <gabe@cs.columbia.edu>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240117203609.4122520-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When compiling with gcc version 14.0.1 20240116 (experimental)
and W=1, I've noticed the following warning:
block/bio-integrity.c: In function 'bio_integrity_map_user':
block/bio-integrity.c:339:38: warning: 'kcalloc' sizes specified with 'sizeof'
in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
339 | bvec = kcalloc(sizeof(*bvec), nr_vecs, GFP_KERNEL);
| ^
block/bio-integrity.c:339:38: note: earlier argument should specify number of
elements, later size of each element
Since 'n' and 'size' arguments of 'kcalloc()' are multiplied to
calculate the final size, their actual order doesn't affect the
result and so this is not a bug. But it's still worth to fix it.
Fixes: 492c5d455969 ("block: bio-integrity: directly map user buffers")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240116143437.89060-1-dmantipov@yandex.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 99e603874366
("blk-cgroup: pass a gendisk to the blkg allocation helpers") changed
blkg_alloc() to take a struct gendisk instead of a struct request_queue,
but the documentation comment still referred to q.
So, update that comment to refer to disk instead and fix a typo.
Signed-off-by: Nicky Chorley <ndchorley@gmail.com>
Link: https://lore.kernel.org/r/20240114191056.6992-1-ndchorley@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
q_usage_counter is the only thing preventing us from the limits changing
under us in __bio_split_to_limits, but blk_mq_submit_bio doesn't hold
it while calling into it.
Move the splitting inside the region where we know we've got a queue
reference. Ideally this could still remain a shared section of code, but
let's keep the fix simple and defer any refactoring here to later.
Reported-by: Christoph Hellwig <hch@lst.de>
Fixes: 900e08075202 ("block: move queue enter logic into blk_mq_submit_bio()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
