| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In order to switch fuse over to using iomap for buffered writes we need
to be able to have the struct file for the original write, in case we
have to read in the page to make it uptodate. Handle this by using the
existing private field in the iomap_iter, and add the argument to
iomap_file_buffered_write. This will allow us to pass the file in
through the iomap buffered write path, and is flexible for any other
file systems needs.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/7f55c7c32275004ba00cddf862d970e6e633f750.1724755651.git.josef@toxicpanda.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
bio_split_rw is designed to split read and write bios with a payload.
Currently it is called by __bio_split_to_limits for all operations not
explicitly list, which works because bio_may_need_split explicitly checks
for bi_vcnt == 1 and thus skips the bypass if there is no payload and
bio_for_each_bvec loop will never execute it's body if bi_size is 0.
But all this is hard to understand, fragile and wasted pointless cycles.
Switch __bio_split_to_limits to only call bio_split_rw for READ and
WRITE command and don't attempt any kind split for operation that do not
require splitting.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Link: https://lore.kernel.org/r/20240826173820.1690925-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently REQ_OP_ZONE_APPEND is handled by the bio_split_rw case in
__bio_split_to_limits. This is harmful because REQ_OP_ZONE_APPEND
bios do not adhere to the soft max_limits value but instead use their
own capped version of max_hw_sectors, leading to incorrect splits that
later blow up in bio_split.
We still need the bio_split_rw logic to count nr_segs for blk-mq code,
so add a new wrapper that passes in the right limit, and turns any bio
that would need a split into an error as an additional debugging aid.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Link: https://lore.kernel.org/r/20240826173820.1690925-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The current setup with bio_may_exceed_limit and __bio_split_to_limits
is a bit of a mess.
Change it so that __bio_split_to_limits does all the work and is just
a variant of bio_split_to_limits that returns nr_segs. This is done
by inlining it and instead have the various bio_split_* helpers directly
submit the potentially split bios.
To support btrfs, the rw version has a lower level helper split out
that just returns the offset to split. This turns out to nicely clean
up the btrfs flow as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Link: https://lore.kernel.org/r/20240826173820.1690925-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While the FALLOC_FL_NO_HIDE_STALE value has been registered, it has
always been rejected by vfs_fallocate before making it into
blkdev_fallocate because it isn't in the supported mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240827065123.1762168-2-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
On error, blkdev_issue_write_zeroes used to recheck the block device's
WRITE SAME queue limits after submitting WRITE SAME bios. As stated in
the comment, the purpose of this was to collapse all IO errors to
EOPNOTSUPP if the effect of issuing bios was that WRITE SAME got turned
off in the queue limits. Therefore, it does not make sense to reuse the
zeroes limit that was read earlier in the function because we only care
about the queue limit *now*, not what it was at the start of the
function.
Found by running generic/351 from fstests.
Fixes: 64b582ca88ca1 ("block: Read max write zeroes once for __blkdev_issue_write_zeroes()")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240827175340.GB1977952@frogsfrogsfrogs
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Recently running UBSAN caught few out of bound shifts in the
ioc_forgive_debts() function:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
Call Trace:
<IRQ>
dump_stack_lvl+0xca/0x130
__ubsan_handle_shift_out_of_bounds+0x22c/0x280
? __lock_acquire+0x6441/0x7c10
ioc_timer_fn+0x6cec/0x7750
? blk_iocost_init+0x720/0x720
? call_timer_fn+0x5d/0x470
call_timer_fn+0xfa/0x470
? blk_iocost_init+0x720/0x720
__run_timer_base+0x519/0x700
...
Actual impact of this issue was not identified but I propose to fix the
undefined behaviour.
The proposed fix to prevent those out of bound shifts consist of
precalculating exponent before using it the shift operations by taking
min value from the actual exponent and maximum possible number of bits.
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Konstantin Ovsepian <ovs@ovs.to>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240822154137.2627818-1-ovs@ovs.to
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch introduces a new LSM blob to the block_device structure,
enabling the security subsystem to store security-sensitive data related
to block devices. Currently, for a device mapper's mapped device containing
a dm-verity target, critical security information such as the roothash and
its signing state are not readily accessible. Specifically, while the
dm-verity volume creation process passes the dm-verity roothash and its
signature from userspace to the kernel, the roothash is stored privately
within the dm-verity target, and its signature is discarded
post-verification. This makes it extremely hard for the security subsystem
to utilize these data.
With the addition of the LSM blob to the block_device structure, the
security subsystem can now retain and manage important security metadata
such as the roothash and the signing state of a dm-verity by storing them
inside the blob. Access decisions can then be based on these stored data.
The implementation follows the same approach used for security blobs in
other structures like struct file, struct inode, and struct superblock.
The initialization of the security blob occurs after the creation of the
struct block_device, performed by the security subsystem. Similarly, the
security blob is freed by the security subsystem before the struct
block_device is deallocated or freed.
This patch also introduces a new hook security_bdev_setintegrity() to save
block device's integrity data to the new LSM blob. For example, for
dm-verity, it can use this hook to expose its roothash and signing state
to LSMs, then LSMs can save these data into the LSM blob.
Please note that the new hook should be invoked every time the security
information is updated to keep these data current. For example, in
dm-verity, if the mapping table is reloaded and configured to use a
different dm-verity target with a new roothash and signing information,
the previously stored data in the LSM blob will become obsolete. It is
crucial to re-invoke the hook to refresh these data and ensure they are up
to date. This necessity arises from the design of device-mapper, where a
device-mapper device is first created, and then targets are subsequently
loaded into it. These targets can be modified multiple times during the
device's lifetime. Therefore, while the LSM blob is allocated during the
creation of the block device, its actual contents are not initialized at
this stage and can change substantially over time. This includes
alterations from data that the LSM 'trusts' to those it does not, making
it essential to handle these changes correctly. Failure to address this
dynamic aspect could potentially allow for bypassing LSM checks.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: merge fuzz, subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When soft interrupt actions are called, they are passed a pointer to the
struct softirq action which contains the action's function pointer.
This pointer isn't useful, as the action callback already knows what
function it is. And since each callback handles a specific soft interrupt,
the callback also knows which soft interrupt number is running.
No soft interrupt action callback actually uses this parameter, so remove
it from the function pointer signature. This clarifies that soft interrupt
actions are global routines and makes it slightly cheaper to call them.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/all/20240815171549.3260003-1-csander@purestorage.com
|
|
As reported in [0], we may get a hang when formatting a XFS FS on a RAID0
drive.
Commit 73a768d5f955 ("block: factor out a blk_write_zeroes_limit helper")
changed __blkdev_issue_write_zeroes() to read the max write zeroes
value in the loop. This is not safe as max write zeroes may change in
value. Specifically for the case of [0], the value goes to 0, and we get
an infinite loop.
Lift the limit reading out of the loop.
[0] https://lore.kernel.org/linux-xfs/4d31268f-310b-4220-88a2-e191c3932a82@oracle.com/T/#t
Fixes: 73a768d5f955 ("block: factor out a blk_write_zeroes_limit helper")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240815163228.216051-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit bb7e5a193d8b ("block, bfq: remove blkg_path()") removed the
implementation but leave declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20240816095821.877842-1-yuehaibing@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Lockdep reported a warning in Linux version 6.6:
[ 414.344659] ================================
[ 414.345155] WARNING: inconsistent lock state
[ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted
[ 414.346221] --------------------------------
[ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
[ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes:
[ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0
[ 414.351204] {IN-SOFTIRQ-W} state was registered at:
[ 414.351751] lock_acquire+0x18d/0x460
[ 414.352218] _raw_spin_lock_irqsave+0x39/0x60
[ 414.352769] __wake_up_common_lock+0x22/0x60
[ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0
[ 414.353829] sbitmap_queue_clear+0xdd/0x270
[ 414.354338] blk_mq_put_tag+0xdf/0x170
[ 414.354807] __blk_mq_free_request+0x381/0x4d0
[ 414.355335] blk_mq_free_request+0x28b/0x3e0
[ 414.355847] __blk_mq_end_request+0x242/0xc30
[ 414.356367] scsi_end_request+0x2c1/0x830
[ 414.345155] WARNING: inconsistent lock state
[ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted
[ 414.346221] --------------------------------
[ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
[ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes:
[ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0
[ 414.351204] {IN-SOFTIRQ-W} state was registered at:
[ 414.351751] lock_acquire+0x18d/0x460
[ 414.352218] _raw_spin_lock_irqsave+0x39/0x60
[ 414.352769] __wake_up_common_lock+0x22/0x60
[ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0
[ 414.353829] sbitmap_queue_clear+0xdd/0x270
[ 414.354338] blk_mq_put_tag+0xdf/0x170
[ 414.354807] __blk_mq_free_request+0x381/0x4d0
[ 414.355335] blk_mq_free_request+0x28b/0x3e0
[ 414.355847] __blk_mq_end_request+0x242/0xc30
[ 414.356367] scsi_end_request+0x2c1/0x830
[ 414.356863] scsi_io_completion+0x177/0x1610
[ 414.357379] scsi_complete+0x12f/0x260
[ 414.357856] blk_complete_reqs+0xba/0xf0
[ 414.358338] __do_softirq+0x1b0/0x7a2
[ 414.358796] irq_exit_rcu+0x14b/0x1a0
[ 414.359262] sysvec_call_function_single+0xaf/0xc0
[ 414.359828] asm_sysvec_call_function_single+0x1a/0x20
[ 414.360426] default_idle+0x1e/0x30
[ 414.360873] default_idle_call+0x9b/0x1f0
[ 414.361390] do_idle+0x2d2/0x3e0
[ 414.361819] cpu_startup_entry+0x55/0x60
[ 414.362314] start_secondary+0x235/0x2b0
[ 414.362809] secondary_startup_64_no_verify+0x18f/0x19b
[ 414.363413] irq event stamp: 428794
[ 414.363825] hardirqs last enabled at (428793): [<ffffffff816bfd1c>] ktime_get+0x1dc/0x200
[ 414.364694] hardirqs last disabled at (428794): [<ffffffff85470177>] _raw_spin_lock_irq+0x47/0x50
[ 414.365629] softirqs last enabled at (428444): [<ffffffff85474780>] __do_softirq+0x540/0x7a2
[ 414.366522] softirqs last disabled at (428419): [<ffffffff813f65ab>] irq_exit_rcu+0x14b/0x1a0
[ 414.367425]
other info that might help us debug this:
[ 414.368194] Possible unsafe locking scenario:
[ 414.368900] CPU0
[ 414.369225] ----
[ 414.369548] lock(&sbq->ws[i].wait);
[ 414.370000] <Interrupt>
[ 414.370342] lock(&sbq->ws[i].wait);
[ 414.370802]
*** DEADLOCK ***
[ 414.371569] 5 locks held by kworker/u10:3/1152:
[ 414.372088] #0: ffff88810130e938 ((wq_completion)writeback){+.+.}-{0:0}, at: process_scheduled_works+0x357/0x13f0
[ 414.373180] #1: ffff88810201fdb8 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x3a3/0x13f0
[ 414.374384] #2: ffffffff86ffbdc0 (rcu_read_lock){....}-{1:2}, at: blk_mq_run_hw_queue+0x637/0xa00
[ 414.375342] #3: ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0
[ 414.376377] #4: ffff888106205a08 (&hctx->dispatch_wait_lock){+.-.}-{2:2}, at: blk_mq_dispatch_rq_list+0x1337/0x1ee0
[ 414.378607]
stack backtrace:
[ 414.379177] CPU: 0 PID: 1152 Comm: kworker/u10:3 Not tainted 6.6.0-07439-gba2303cacfda #6
[ 414.380032] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 414.381177] Workqueue: writeback wb_workfn (flush-253:0)
[ 414.381805] Call Trace:
[ 414.382136] <TASK>
[ 414.382429] dump_stack_lvl+0x91/0xf0
[ 414.382884] mark_lock_irq+0xb3b/0x1260
[ 414.383367] ? __pfx_mark_lock_irq+0x10/0x10
[ 414.383889] ? stack_trace_save+0x8e/0xc0
[ 414.384373] ? __pfx_stack_trace_save+0x10/0x10
[ 414.384903] ? graph_lock+0xcf/0x410
[ 414.385350] ? save_trace+0x3d/0xc70
[ 414.385808] mark_lock.part.20+0x56d/0xa90
[ 414.386317] mark_held_locks+0xb0/0x110
[ 414.386791] ? __pfx_do_raw_spin_lock+0x10/0x10
[ 414.387320] lockdep_hardirqs_on_prepare+0x297/0x3f0
[ 414.387901] ? _raw_spin_unlock_irq+0x28/0x50
[ 414.388422] trace_hardirqs_on+0x58/0x100
[ 414.388917] _raw_spin_unlock_irq+0x28/0x50
[ 414.389422] __blk_mq_tag_busy+0x1d6/0x2a0
[ 414.389920] __blk_mq_get_driver_tag+0x761/0x9f0
[ 414.390899] blk_mq_dispatch_rq_list+0x1780/0x1ee0
[ 414.391473] ? __pfx_blk_mq_dispatch_rq_list+0x10/0x10
[ 414.392070] ? sbitmap_get+0x2b8/0x450
[ 414.392533] ? __blk_mq_get_driver_tag+0x210/0x9f0
[ 414.393095] __blk_mq_sched_dispatch_requests+0xd99/0x1690
[ 414.393730] ? elv_attempt_insert_merge+0x1b1/0x420
[ 414.394302] ? __pfx___blk_mq_sched_dispatch_requests+0x10/0x10
[ 414.394970] ? lock_acquire+0x18d/0x460
[ 414.395456] ? blk_mq_run_hw_queue+0x637/0xa00
[ 414.395986] ? __pfx_lock_acquire+0x10/0x10
[ 414.396499] blk_mq_sched_dispatch_requests+0x109/0x190
[ 414.397100] blk_mq_run_hw_queue+0x66e/0xa00
[ 414.397616] blk_mq_flush_plug_list.part.17+0x614/0x2030
[ 414.398244] ? __pfx_blk_mq_flush_plug_list.part.17+0x10/0x10
[ 414.398897] ? writeback_sb_inodes+0x241/0xcc0
[ 414.399429] blk_mq_flush_plug_list+0x65/0x80
[ 414.399957] __blk_flush_plug+0x2f1/0x530
[ 414.400458] ? __pfx___blk_flush_plug+0x10/0x10
[ 414.400999] blk_finish_plug+0x59/0xa0
[ 414.401467] wb_writeback+0x7cc/0x920
[ 414.401935] ? __pfx_wb_writeback+0x10/0x10
[ 414.402442] ? mark_held_locks+0xb0/0x110
[ 414.402931] ? __pfx_do_raw_spin_lock+0x10/0x10
[ 414.403462] ? lockdep_hardirqs_on_prepare+0x297/0x3f0
[ 414.404062] wb_workfn+0x2b3/0xcf0
[ 414.404500] ? __pfx_wb_workfn+0x10/0x10
[ 414.404989] process_scheduled_works+0x432/0x13f0
[ 414.405546] ? __pfx_process_scheduled_works+0x10/0x10
[ 414.406139] ? do_raw_spin_lock+0x101/0x2a0
[ 414.406641] ? assign_work+0x19b/0x240
[ 414.407106] ? lock_is_held_type+0x9d/0x110
[ 414.407604] worker_thread+0x6f2/0x1160
[ 414.408075] ? __kthread_parkme+0x62/0x210
[ 414.408572] ? lockdep_hardirqs_on_prepare+0x297/0x3f0
[ 414.409168] ? __kthread_parkme+0x13c/0x210
[ 414.409678] ? __pfx_worker_thread+0x10/0x10
[ 414.410191] kthread+0x33c/0x440
[ 414.410602] ? __pfx_kthread+0x10/0x10
[ 414.411068] ret_from_fork+0x4d/0x80
[ 414.411526] ? __pfx_kthread+0x10/0x10
[ 414.411993] ret_from_fork_asm+0x1b/0x30
[ 414.412489] </TASK>
When interrupt is turned on while a lock holding by spin_lock_irq it
throws a warning because of potential deadlock.
blk_mq_prep_dispatch_rq
blk_mq_get_driver_tag
__blk_mq_get_driver_tag
__blk_mq_alloc_driver_tag
blk_mq_tag_busy -> tag is already busy
// failed to get driver tag
blk_mq_mark_tag_wait
spin_lock_irq(&wq->lock) -> lock A (&sbq->ws[i].wait)
__add_wait_queue(wq, wait) -> wait queue active
blk_mq_get_driver_tag
__blk_mq_tag_busy
-> 1) tag must be idle, which means there can't be inflight IO
spin_lock_irq(&tags->lock) -> lock B (hctx->tags)
spin_unlock_irq(&tags->lock) -> unlock B, turn on interrupt accidentally
-> 2) context must be preempt by IO interrupt to trigger deadlock.
As shown above, the deadlock is not possible in theory, but the warning
still need to be fixed.
Fix it by using spin_lock_irqsave to get lockB instead of spin_lock_irq.
Fixes: 4f1731df60f9 ("blk-mq: fix potential io hang by wrong 'wake_batch'")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240815024736.2040971-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This function doesn't mutate data.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/d24611b3-dddf-473a-903d-39290db03b11@p183
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It is not possible to build t10-pi.ko anymore.
This file doesn't even export functions.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/216ccc79-5b80-47b2-b507-990951aa810c@p183
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We check in submit_bio_noacct() if flag REQ_ATOMIC is set for both read and
write operations, and then validate the atomic operation if set. Flag
REQ_ATOMIC can only be set for writes, so don't bother checking for reads.
Fixes: 9da3d1e912f3 ("block: Add core atomic write support")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240805113315.1048591-3-john.g.garry@oracle.com
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Convert all callers from working on a page to working on one page
of a folio (support for working on an entire folio can come later).
Removes a lot of folio->page->folio conversions.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Most callers have a folio, and most implementations operate on a folio,
so remove the conversion from folio->page->folio to fit through this
interface.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All callers now have a folio, so pass it in instead of converting
from a folio to a page and back to a folio again. Saves a call
to compound_head().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replaces two hidden calls to compound_head() with one explicit one.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
ioprio works on the blk-cgroup level, all disks in the same cgroup
are the same, and the struct ioprio_blkg doesn't have anything in it.
Hence register the policy is enough, because cpd_alloc/free_fn will
be handled for each blk-cgroup, and there is no need to activate the
policy for disk. Hence remove blk_ioprio_init/exit and
ioprio_alloc/free_pd.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240719071506.158075-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, if config is enabled, then ioprio is always enabled by
default from blkcg_init_disk(), hence there is no point to check if
the policy is enabled from blkg in ioprio_blkcg_from_bio(). Hence remove
it and get blkcg directly from bio.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240719071506.158075-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently all policies implement pd_(alloc|free)_fn, however, this is
not necessary for ioprio that only works for blkcg, not blkg.
There are no functional changes, prepare to cleanup activating ioprio
policy.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240719071506.158075-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The struct 'latency_bucket' and the #define 'request_bucket_index'
are unused since
commit bf20ab538c81 ("blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW")
and the 'LATENCY_BUCKET_SIZE' #define was only used by the
'request_bucket_index' define.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240727155824.1000042-1-linux@treblig.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Our test report the following hung task:
[ 2538.459400] INFO: task "kworker/0:0":7 blocked for more than 188 seconds.
[ 2538.459427] Call trace:
[ 2538.459430] __switch_to+0x174/0x338
[ 2538.459436] __schedule+0x628/0x9c4
[ 2538.459442] schedule+0x7c/0xe8
[ 2538.459447] schedule_preempt_disabled+0x24/0x40
[ 2538.459453] __mutex_lock+0x3ec/0xf04
[ 2538.459456] __mutex_lock_slowpath+0x14/0x24
[ 2538.459459] mutex_lock+0x30/0xd8
[ 2538.459462] del_gendisk+0xdc/0x350
[ 2538.459466] sd_remove+0x30/0x60
[ 2538.459470] device_release_driver_internal+0x1c4/0x2c4
[ 2538.459474] device_release_driver+0x18/0x28
[ 2538.459478] bus_remove_device+0x15c/0x174
[ 2538.459483] device_del+0x1d0/0x358
[ 2538.459488] __scsi_remove_device+0xa8/0x198
[ 2538.459493] scsi_forget_host+0x50/0x70
[ 2538.459497] scsi_remove_host+0x80/0x180
[ 2538.459502] usb_stor_disconnect+0x68/0xf4
[ 2538.459506] usb_unbind_interface+0xd4/0x280
[ 2538.459510] device_release_driver_internal+0x1c4/0x2c4
[ 2538.459514] device_release_driver+0x18/0x28
[ 2538.459518] bus_remove_device+0x15c/0x174
[ 2538.459523] device_del+0x1d0/0x358
[ 2538.459528] usb_disable_device+0x84/0x194
[ 2538.459532] usb_disconnect+0xec/0x300
[ 2538.459537] hub_event+0xb80/0x1870
[ 2538.459541] process_scheduled_works+0x248/0x4dc
[ 2538.459545] worker_thread+0x244/0x334
[ 2538.459549] kthread+0x114/0x1bc
[ 2538.461001] INFO: task "fsck.":15415 blocked for more than 188 seconds.
[ 2538.461014] Call trace:
[ 2538.461016] __switch_to+0x174/0x338
[ 2538.461021] __schedule+0x628/0x9c4
[ 2538.461025] schedule+0x7c/0xe8
[ 2538.461030] blk_queue_enter+0xc4/0x160
[ 2538.461034] blk_mq_alloc_request+0x120/0x1d4
[ 2538.461037] scsi_execute_cmd+0x7c/0x23c
[ 2538.461040] ioctl_internal_command+0x5c/0x164
[ 2538.461046] scsi_set_medium_removal+0x5c/0xb0
[ 2538.461051] sd_release+0x50/0x94
[ 2538.461054] blkdev_put+0x190/0x28c
[ 2538.461058] blkdev_release+0x28/0x40
[ 2538.461063] __fput+0xf8/0x2a8
[ 2538.461066] __fput_sync+0x28/0x5c
[ 2538.461070] __arm64_sys_close+0x84/0xe8
[ 2538.461073] invoke_syscall+0x58/0x114
[ 2538.461078] el0_svc_common+0xac/0xe0
[ 2538.461082] do_el0_svc+0x1c/0x28
[ 2538.461087] el0_svc+0x38/0x68
[ 2538.461090] el0t_64_sync_handler+0x68/0xbc
[ 2538.461093] el0t_64_sync+0x1a8/0x1ac
T1: T2:
sd_remove
del_gendisk
__blk_mark_disk_dead
blk_freeze_queue_start
++q->mq_freeze_depth
bdev_release
mutex_lock(&disk->open_mutex)
sd_release
scsi_execute_cmd
blk_queue_enter
wait_event(!q->mq_freeze_depth)
mutex_lock(&disk->open_mutex)
SCSI does not set GD_OWNS_QUEUE, so QUEUE_FLAG_DYING is not set in
this scenario. This is a classic ABBA deadlock. To fix the deadlock,
make sure we don't try to acquire disk->open_mutex after freezing
the queue.
Cc: stable@vger.kernel.org
Fixes: eec1be4c30df ("block: delete partitions later in del_gendisk")
Signed-off-by: Yang Yang <yang.yang@vivo.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: and Cc: stable tags are missing. Otherwise this patch looks fine
Link: https://lore.kernel.org/r/20240724070412.22521-1-yang.yang@vivo.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull more block updates from Jens Axboe:
- MD fixes via Song:
- md-cluster fixes (Heming Zhao)
- raid1 fix (Mateusz Jończyk)
- s390/dasd module description (Jeff)
- Series cleaning up and hardening the blk-mq debugfs flag handling
(John, Christoph)
- blk-cgroup cleanup (Xiu)
- Error polled IO attempts if backend doesn't support it (hexue)
- Fix for an sbitmap hang (Yang)
* tag 'for-6.11/block-20240722' of git://git.kernel.dk/linux: (23 commits)
blk-cgroup: move congestion_count to struct blkcg
sbitmap: fix io hung due to race on sbitmap_word::cleared
block: avoid polling configuration errors
block: Catch possible entries missing from rqf_name[]
block: Simplify definition of RQF_NAME()
block: Use enum to define RQF_x bit indexes
block: Catch possible entries missing from cmd_flag_name[]
block: Catch possible entries missing from alloc_policy_name[]
block: Catch possible entries missing from hctx_flag_name[]
block: Catch possible entries missing from hctx_state_name[]
block: Catch possible entries missing from blk_queue_flag_name[]
block: Make QUEUE_FLAG_x as an enum
block: Relocate BLK_MQ_MAX_DEPTH
block: Relocate BLK_MQ_CPU_WORK_BATCH
block: remove QUEUE_FLAG_STOPPED
block: Add missing entry to hctx_flag_name[]
block: Add zone write plugging entry to rqf_name[]
block: Add missing entries from cmd_flag_name[]
s390/dasd: fix error checks in dasd_copy_pair_store()
s390/dasd: add missing MODULE_DESCRIPTION() macros
...
|
|
Pull block integrity mapping updates from Jens Axboe:
"A set of cleanups and fixes for the block integrity support.
Sent separately from the main block changes from last week, as they
depended on later fixes in the 6.10-rc cycle"
* tag 'for-6.11/block-post-20240722' of git://git.kernel.dk/linux:
block: don't free the integrity payload in bio_integrity_unmap_free_user
block: don't free submitter owned integrity payload on I/O completion
block: call bio_integrity_unmap_free_user from blk_rq_unmap_user
block: don't call bio_uninit from bio_endio
block: also return bio_integrity_payload * from stubs
block: split integrity support out of bio.h
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr) plus some
misc small fixes.
The only core changes are to both bsg and scsi to pass in the device
instead of setting it afterwards as q->queuedata, so no functional
change"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (69 commits)
scsi: aha152x: Use DECLARE_COMPLETION_ONSTACK for non-constant completion
scsi: qla2xxx: Convert comma to semicolon
scsi: qla2xxx: Update version to 10.02.09.300-k
scsi: qla2xxx: Use QP lock to search for bsg
scsi: qla2xxx: Reduce fabric scan duplicate code
scsi: qla2xxx: Fix optrom version displayed in FDMI
scsi: qla2xxx: During vport delete send async logout explicitly
scsi: qla2xxx: Complete command early within lock
scsi: qla2xxx: Fix flash read failure
scsi: qla2xxx: Return ENOBUFS if sg_cnt is more than one for ELS cmds
scsi: qla2xxx: Fix for possible memory corruption
scsi: qla2xxx: validate nvme_local_port correctly
scsi: qla2xxx: Unable to act on RSCN for port online
scsi: ufs: exynos: Add support for Flash Memory Protector (FMP)
scsi: ufs: core: Add UFSHCD_QUIRK_KEYS_IN_PRDT
scsi: ufs: core: Add fill_crypto_prdt variant op
scsi: ufs: core: Add UFSHCD_QUIRK_BROKEN_CRYPTO_ENABLE
scsi: ufs: core: fold ufshcd_clear_keyslot() into its caller
scsi: ufs: core: Add UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE
scsi: ufs: mcq: Make .get_hba_mac() optional
...
|
|
The congestion_count was introduced into the struct cgroup by
commit d09d8df3a294 ("blkcg: add generic throttling mechanism"),
but since it is closely related to the blkio subsys, it is not
appropriate to put it in the struct cgroup, so let's move it to
struct blkcg. There should be no functional changes because blkcg
is per cgroup.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240716133058.3491350-1-xiujianfeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch adds a poll queue check, aiming to help users use polled IO
accurately.
If users do polled IO but the device doesn't have poll queues, they will
get suboptimal performance data and waste CPU resources. Add a poll queue
check batching this. If users don't have the device properly configured,
or if it simply doesn't support polled IO, it will error the IO with
-EOPNOTSUPP. This is similar to what we used to do for sync polled IO,
which is no longer supported.
Signed-off-by: hexue <xue01.he@samsung.com>
Link: https://lore.kernel.org/r/20240718070817.1031494-1-xue01.he@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a BUILD_BUG_ON() call to ensure that we are not missing entries in
rqf_name[].
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-16-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that we have a bit index for RQF_x in __RQF_x, use __RQF_x to simplify
the definition of RQF_NAME() by not using ilog2((__force u32()).
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-15-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a BUILD_BUG_ON() call to ensure that we are not missing entries in
cmd_flag_name[].
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-13-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make BLK_TAG_ALLOC_x an enum and add a "max" entry.
Add a BUILD_BUG_ON() call to ensure that we are not missing entries in
hctx_flag_name[].
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-12-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Refresh values in BLK_MQ_F_x enum, and then re-arrange members in
hctx_flag_name[] to match that enum. Renumber
BLK_MQ_F_ALLOC_POLICY_START_BIT to match the value refresh.
Add a BUILD_BUG_ON() call to ensure that we are not missing entries in
hctx_flag_name[].
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-11-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a build-time assert that we are not missing entries from
hctx_state_name[]. For this, create a separate enum for state flags and add
a "max" entry for BLK_MQ_S_x flags.
The numbering for those enum values is as default, so don't explicitly
number.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-10-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Assert that we are not missing flag entries in blk_queue_flag_name[].
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240719112912.3830443-9-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
BLK_MQ_CPU_WORK_BATCH is defined in include/linux/blk-mq.h, but only used
in blk-mq.c, so relocate to block/blk-mq.h
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-6-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
QUEUE_FLAG_STOPPED is entirely unused.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-5-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add missing entry for NO_SCHED_BY_DEFAULT and reorder to match the enum.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-4-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add missing entry.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add missing entries for req_flag_bits.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
|
|
The rebase of commit 09595e0c9d65 ("block: pass a phys_addr_t to
get_max_segment_size") lost adding the total to to the offset in
blk_bvec_map_sg. Add it back.
Fixes: 09595e0c9d65 ("block: pass a phys_addr_t to get_max_segment_size")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: Chaitanya Kulkarni <chaitanyak@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240709070126.3019940-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Correct the parameter name in the comment of get_max_segment_size()
to fix following warning:-
block/blk-merge.c:220: warning: Function parameter or struct member 'len' not described in 'get_max_segment_size'
block/blk-merge.c:220: warning: Excess function parameter 'max_len' description in 'get_max_segment_size'
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240709045432.8688-1-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some drivers validate that their own logical block size. It is no harm to
always do this, so validate in blk_validate_limits().
This allows us to remove the validation in most of those drivers.
Add a comment to blk_validate_block_size() to inform users that self-
validation of LBS is usually unnecessary.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240708091651.177447-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Work on a single address to simplify the logic, and prepare the callers
from using better helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240706075228.2350978-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Get callers out of poking into bvec internals a bit more. Not a huge win
right now, but with the proposed new DMA mapping API we might end up with
a lot more of this otherwise.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240706075228.2350978-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Zeroout can access a significant capacity and take longer than the user
expected. A user may change their mind about wanting to run that
command and attempt to kill the process and do something else with their
device. But since the task is uninterruptable, they have to wait for it
to finish, which could be many hours.
Add a new BLKDEV_ZERO_KILLABLE flag for blkdev_issue_zeroout that checks
for a fatal signal at each iteration so the user doesn't have to wait for
their regretted operation to complete naturally.
Heavily based on an earlier patch from Keith Busch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240701165219.1571322-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Only fall back from hardware Write Zeroes failures when
blkdev_issue_write_zeroes returns -EOPNOTSUPP;
Note that blkdev_issue_write_zeroes turns any failure into -EOPNOTSUPP
when the write zeroes queue limit has been cleared to 0, so this still
catches all I/O errors where the driver detected missing support
for the hardware acceleration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240701165219.1571322-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split out two well-defined helpers for hardware supported Write Zeroes
and manually writing zeroes using the Write command.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240701165219.1571322-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
