summaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2020-08-16Merge tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-blockLinus Torvalds2-2/+18
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create
2020-08-11block: fix double account of flush request's driver tagMing Lei1-2/+9
In case of none scheduler, we share data request's driver tag for flush request, so have to mark the flush request as INFLIGHT for avoiding double account of this driver tag. Fixes: 568f27006577 ("blk-mq: centralise related handling into blk_mq_get_driver_tag") Reported-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-11Merge tag 'locking-urgent-2020-08-10' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Thomas Gleixner: "A set of locking fixes and updates: - Untangle the header spaghetti which causes build failures in various situations caused by the lockdep additions to seqcount to validate that the write side critical sections are non-preemptible. - The seqcount associated lock debug addons which were blocked by the above fallout. seqcount writers contrary to seqlock writers must be externally serialized, which usually happens via locking - except for strict per CPU seqcounts. As the lock is not part of the seqcount, lockdep cannot validate that the lock is held. This new debug mechanism adds the concept of associated locks. sequence count has now lock type variants and corresponding initializers which take a pointer to the associated lock used for writer serialization. If lockdep is enabled the pointer is stored and write_seqcount_begin() has a lockdep assertion to validate that the lock is held. Aside of the type and the initializer no other code changes are required at the seqcount usage sites. The rest of the seqcount API is unchanged and determines the type at compile time with the help of _Generic which is possible now that the minimal GCC version has been moved up. Adding this lockdep coverage unearthed a handful of seqcount bugs which have been addressed already independent of this. While generally useful this comes with a Trojan Horse twist: On RT kernels the write side critical section can become preemtible if the writers are serialized by an associated lock, which leads to the well known reader preempts writer livelock. RT prevents this by storing the associated lock pointer independent of lockdep in the seqcount and changing the reader side to block on the lock when a reader detects that a writer is in the write side critical section. - Conversion of seqcount usage sites to associated types and initializers" * tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) locking/seqlock, headers: Untangle the spaghetti monster locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header x86/headers: Remove APIC headers from <asm/smp.h> seqcount: More consistent seqprop names seqcount: Compress SEQCNT_LOCKNAME_ZERO() seqlock: Fold seqcount_LOCKNAME_init() definition seqlock: Fold seqcount_LOCKNAME_t definition seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g hrtimer: Use sequence counter with associated raw spinlock kvm/eventfd: Use sequence counter with associated spinlock userfaultfd: Use sequence counter with associated spinlock NFSv4: Use sequence counter with associated spinlock iocost: Use sequence counter with associated spinlock raid5: Use sequence counter with associated spinlock vfs: Use sequence counter with associated spinlock timekeeping: Use sequence counter with associated raw spinlock xfrm: policy: Use sequence counters with associated lock netfilter: nft_set_rbtree: Use sequence counter with associated rwlock netfilter: conntrack: Use sequence counter with associated spinlock sched: tasks: Use sequence counter with associated spinlock ...
2020-08-07Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-19/+22
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a huge docbook fix update like most other subsystems and no major update to the core (the few non trivial updates are either minor fixes or removing an unused feature [scsi_sdb_cache])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits) scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM" scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged scsi: scsi_debug: Implement tur_ms_to_ready parameter scsi: scsi_debug: Fix request sense scsi: lpfc: Fix typo in comment for ULP scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC scsi: iscsi: Do not put host in iscsi_set_flashnode_param() scsi: hpsa: Correct ctrl queue depth scsi: target: tcmu: Make TMR notification optional scsi: target: tcmu: Implement tmr_notify callback scsi: target: tcmu: Fix and simplify timeout handling scsi: target: tcmu: Factor out new helper ring_insert_padding scsi: target: tcmu: Do not queue aborted commands scsi: target: tcmu: Use priv pointer in se_cmd scsi: target: Add tmr_notify backend function scsi: target: Modify core_tmr_abort_task() scsi: target: iscsi: Fix inconsistent debug message scsi: target: iscsi: Fix login error when receiving ...
2020-08-06block: check queue's limits.discard_granularity in __blkdev_issue_discard()Coly Li1-0/+9
If create a loop device with a backing NVMe SSD, current loop device driver doesn't correctly set its queue's limits.discard_granularity and leaves it as 0. If a discard request at LBA 0 on this loop device, in __blkdev_issue_discard() the calculated req_sects will be 0, and a zero length discard request will trigger a BUG() panic in generic block layer code at block/blk-mq.c:563. [ 955.565006][ C39] ------------[ cut here ]------------ [ 955.559660][ C39] invalid opcode: 0000 [#1] SMP NOPTI [ 955.622171][ C39] CPU: 39 PID: 248 Comm: ksoftirqd/39 Tainted: G E 5.8.0-default+ #40 [ 955.622171][ C39] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE160M-2.70]- 07/17/2020 [ 955.622175][ C39] RIP: 0010:blk_mq_end_request+0x107/0x110 [ 955.622177][ C39] Code: 48 8b 03 e9 59 ff ff ff 48 89 df 5b 5d 41 5c e9 9f ed ff ff 48 8b 35 98 3c f4 00 48 83 c7 10 48 83 c6 19 e8 cb 56 c9 ff eb cb <0f> 0b 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 54 [ 955.622179][ C39] RSP: 0018:ffffb1288701fe28 EFLAGS: 00010202 [ 955.749277][ C39] RAX: 0000000000000001 RBX: ffff956fffba5080 RCX: 0000000000004003 [ 955.749278][ C39] RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000000 [ 955.749279][ C39] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 955.749279][ C39] R10: ffffb1288701fd28 R11: 0000000000000001 R12: ffffffffa8e05160 [ 955.749280][ C39] R13: 0000000000000004 R14: 0000000000000004 R15: ffffffffa7ad3a1e [ 955.749281][ C39] FS: 0000000000000000(0000) GS:ffff95bfbda00000(0000) knlGS:0000000000000000 [ 955.749282][ C39] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 955.749282][ C39] CR2: 00007f6f0ef766a8 CR3: 0000005a37012002 CR4: 00000000007606e0 [ 955.749283][ C39] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 955.749284][ C39] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 955.749284][ C39] PKRU: 55555554 [ 955.749285][ C39] Call Trace: [ 955.749290][ C39] blk_done_softirq+0x99/0xc0 [ 957.550669][ C39] __do_softirq+0xd3/0x45f [ 957.550677][ C39] ? smpboot_thread_fn+0x2f/0x1e0 [ 957.550679][ C39] ? smpboot_thread_fn+0x74/0x1e0 [ 957.550680][ C39] ? smpboot_thread_fn+0x14e/0x1e0 [ 957.550684][ C39] run_ksoftirqd+0x30/0x60 [ 957.550687][ C39] smpboot_thread_fn+0x149/0x1e0 [ 957.886225][ C39] ? sort_range+0x20/0x20 [ 957.886226][ C39] kthread+0x137/0x160 [ 957.886228][ C39] ? kthread_park+0x90/0x90 [ 957.886231][ C39] ret_from_fork+0x22/0x30 [ 959.117120][ C39] ---[ end trace 3dacdac97e2ed164 ]--- This is the procedure to reproduce the panic, # modprobe scsi_debug delay=0 dev_size_mb=2048 max_queue=1 # losetup -f /dev/nvme0n1 --direct-io=on # blkdiscard /dev/loop0 -o 0 -l 0x200 This patch fixes the issue by checking q->limits.discard_granularity in __blkdev_issue_discard() before composing the discard bio. If the value is 0, then prints a warning oops information and returns -EOPNOTSUPP to the caller to indicate that this buggy device driver doesn't support discard request. Fixes: 9b15d109a6b2 ("block: improve discard bio alignment in __blkdev_issue_discard()") Fixes: c52abf563049 ("loop: Better discard support for block devices") Reported-and-suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Enzo Matsumiya <ematsumiya@suse.com> Cc: Evan Green <evgreen@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Xiao Ni <xni@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-05Merge tag 'for-5.9/block-merge-20200804' of git://git.kernel.dk/linux-blockLinus Torvalds2-34/+6
Pull block stacking updates from Jens Axboe: "The stacking related fixes depended on both the core block and drivers branches, so here's a topic branch with that change. Outside of that, a late fix from Johannes for zone revalidation" * tag 'for-5.9/block-merge-20200804' of git://git.kernel.dk/linux-block: block: don't do revalidate zones on invalid devices block: remove blk_queue_stack_limits block: remove bdev_stack_limits block: inherit the zoned characteristics in blk_stack_limits
2020-08-05Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-blockLinus Torvalds3-2/+31
Pull block driver updates from Jens Axboe: - NVMe: - ZNS support (Aravind, Keith, Matias, Niklas) - Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David, Dongli, Max, Sagi) - null_blk zone capacity support (Aravind) - MD: - raid5/6 fixes (ChangSyun) - Warning fixes (Damien) - raid5 stripe fixes (Guoqing, Song, Yufen) - sysfs deadlock fix (Junxiao) - raid10 deadlock fix (Vitaly) - struct_size conversions (Gustavo) - Set of bcache updates/fixes (Coly) * tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits) md/raid5: Allow degraded raid6 to do rmw md/raid5: Fix Force reconstruct-write io stuck in degraded raid5 raid5: don't duplicate code for different paths in handle_stripe raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show md: print errno in super_written md/raid5: remove the redundant setting of STRIPE_HANDLE md: register new md sysfs file 'uuid' read-only md: fix max sectors calculation for super 1.0 nvme-loop: remove extra variable in create ctrl nvme-loop: set ctrl state connecting after init nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths nvme-multipath: fix logic for non-optimized paths nvme-rdma: fix controller reset hang during traffic nvme-tcp: fix controller reset hang during traffic nvmet: introduce the passthru Kconfig option nvmet: introduce the passthru configfs interface nvmet: Add passthru enable/disable helpers nvmet: add passthru code to process commands nvme: export nvme_find_get_ns() and nvme_put_ns() nvme: introduce nvme_ctrl_get_by_path() ...
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
2020-08-03Merge tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+6
Pull io_uring updates from Jens Axboe: "Lots of cleanups in here, hardening the code and/or making it easier to read and fixing bugs, but a core feature/change too adding support for real async buffered reads. With the latter in place, we just need buffered write async support and we're done relying on kthreads for the fast path. In detail: - Cleanup how memory accounting is done on ring setup/free (Bijan) - sq array offset calculation fixup (Dmitry) - Consistently handle blocking off O_DIRECT submission path (me) - Support proper async buffered reads, instead of relying on kthread offload for that. This uses the page waitqueue to drive retries from task_work, like we handle poll based retry. (me) - IO completion optimizations (me) - Fix race with accounting and ring fd install (me) - Support EPOLLEXCLUSIVE (Jiufei) - Get rid of the io_kiocb unionizing, made possible by shrinking other bits (Pavel) - Completion side cleanups (Pavel) - Cleanup REQ_F_ flags handling, and kill off many of them (Pavel) - Request environment grabbing cleanups (Pavel) - File and socket read/write cleanups (Pavel) - Improve kiocb_set_rw_flags() (Pavel) - Tons of fixes and cleanups (Pavel) - IORING_SQ_NEED_WAKEUP clear fix (Xiaoguang)" * tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block: (127 commits) io_uring: flip if handling after io_setup_async_rw fs: optimise kiocb_set_rw_flags() io_uring: don't touch 'ctx' after installing file descriptor io_uring: get rid of atomic FAA for cq_timeouts io_uring: consolidate *_check_overflow accounting io_uring: fix stalled deferred requests io_uring: fix racy overflow count reporting io_uring: deduplicate __io_complete_rw() io_uring: de-unionise io_kiocb io-wq: update hash bits io_uring: fix missing io_queue_linked_timeout() io_uring: mark ->work uninitialised after cleanup io_uring: deduplicate io_grab_files() calls io_uring: don't do opcode prep twice io_uring: clear IORING_SQ_NEED_WAKEUP after executing task works io_uring: batch put_task_struct() tasks: add put_task_struct_many() io_uring: return locked and pinned page accounting io_uring: don't miscount pinned memory io_uring: don't open-code recv kbuf managment ...
2020-08-03Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-blockLinus Torvalds29-950/+1054
Pull core block updates from Jens Axboe: "Good amount of cleanups and tech debt removals in here, and as a result, the diffstat shows a nice net reduction in code. - Softirq completion cleanups (Christoph) - Stop using ->queuedata (Christoph) - Cleanup bd claiming (Christoph) - Use check_events, moving away from the legacy media change (Christoph) - Use inode i_blkbits consistently (Christoph) - Remove old unused writeback congestion bits (Christoph) - Cleanup/unify submission path (Christoph) - Use bio_uninit consistently, instead of bio_disassociate_blkg (Christoph) - sbitmap cleared bits handling (John) - Request merging blktrace event addition (Jan) - sysfs add/remove race fixes (Luis) - blk-mq tag fixes/optimizations (Ming) - Duplicate words in comments (Randy) - Flush deferral cleanup (Yufen) - IO context locking/retry fixes (John) - struct_size() usage (Gustavo) - blk-iocost fixes (Chengming) - blk-cgroup IO stats fixes (Boris) - Various little fixes" * tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits) block: blk-timeout: delete duplicated word block: blk-mq-sched: delete duplicated word block: blk-mq: delete duplicated word block: genhd: delete duplicated words block: elevator: delete duplicated word and fix typos block: bio: delete duplicated words block: bfq-iosched: fix duplicated word iocost_monitor: start from the oldest usage index iocost: Fix check condition of iocg abs_vdebt block: Remove callback typedefs for blk_mq_ops block: Use non _rcu version of list functions for tag_set_list blk-cgroup: show global disk stats in root cgroup io.stat blk-cgroup: make iostat functions visible to stat printing block: improve discard bio alignment in __blkdev_issue_discard() block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers block: defer flush request no matter whether we have elevator block: make blk_timeout_init() static block: remove retry loop in ioc_release_fn() block: remove unnecessary ioc nested locking block: integrate bd_start_claiming into __blkdev_get ...
2020-08-03block: don't do revalidate zones on invalid devicesJohannes Thumshirn1-0/+3
When we loose a device for whatever reason while (re)scanning zones, we trip over a NULL pointer in blk_revalidate_zone_cb, like in the following log: sd 0:0:0:0: [sda] 3418095616 4096-byte logical blocks: (14.0 TB/12.7 TiB) sd 0:0:0:0: [sda] 52156 zones of 65536 logical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 37 00 00 08 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] REPORT ZONES start lba 1065287680 failed sd 0:0:0:0: [sda] REPORT ZONES: Result: hostbyte=0x00 driverbyte=0x08 sd 0:0:0:0: [sda] Sense Key : 0xb [current] sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x6 sda: failed to revalidate zones sd 0:0:0:0: [sda] 0 4096-byte logical blocks: (0 B/0 B) sda: detected capacity change from 14000519643136 to 0 ================================================================== BUG: KASAN: null-ptr-deref in blk_revalidate_zone_cb+0x1b7/0x550 Write of size 8 at addr 0000000000000010 by task kworker/u4:1/58 CPU: 1 PID: 58 Comm: kworker/u4:1 Not tainted 5.8.0-rc1 #692 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014 Workqueue: events_unbound async_run_entry_fn Call Trace: dump_stack+0x7d/0xb0 ? blk_revalidate_zone_cb+0x1b7/0x550 kasan_report.cold+0x5/0x37 ? blk_revalidate_zone_cb+0x1b7/0x550 check_memory_region+0x145/0x1a0 blk_revalidate_zone_cb+0x1b7/0x550 sd_zbc_parse_report+0x1f1/0x370 ? blk_req_zone_write_trylock+0x200/0x200 ? sectors_to_logical+0x60/0x60 ? blk_req_zone_write_trylock+0x200/0x200 ? blk_req_zone_write_trylock+0x200/0x200 sd_zbc_report_zones+0x3c4/0x5e0 ? sd_dif_config_host+0x500/0x500 blk_revalidate_disk_zones+0x231/0x44d ? _raw_write_lock_irqsave+0xb0/0xb0 ? blk_queue_free_zone_bitmaps+0xd0/0xd0 sd_zbc_read_zones+0x8cf/0x11a0 sd_revalidate_disk+0x305c/0x64e0 ? __device_add_disk+0x776/0xf20 ? read_capacity_16.part.0+0x1080/0x1080 ? blk_alloc_devt+0x250/0x250 ? create_object.isra.0+0x595/0xa20 ? kasan_unpoison_shadow+0x33/0x40 sd_probe+0x8dc/0xcd2 really_probe+0x20e/0xaf0 __driver_attach_async_helper+0x249/0x2d0 async_run_entry_fn+0xbe/0x560 process_one_work+0x764/0x1290 ? _raw_read_unlock_irqrestore+0x30/0x30 worker_thread+0x598/0x12f0 ? __kthread_parkme+0xc6/0x1b0 ? schedule+0xed/0x2c0 ? process_one_work+0x1290/0x1290 kthread+0x36b/0x440 ? kthread_create_worker_on_cpu+0xa0/0xa0 ret_from_fork+0x22/0x30 ================================================================== When the device is already gone we end up with the following scenario: The device's capacity is 0 and thus the number of zones will be 0 as well. When allocating the bitmap for the conventional zones, we then trip over a NULL pointer. So if we encounter a zoned block device with a 0 capacity, don't dare to revalidate the zones sizes. Fixes: 6c6b35491422 ("block: set the zone size in blk_revalidate_disk_zones atomically") Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-01block: blk-timeout: delete duplicated wordRandy Dunlap1-1/+1
Drop the repeated word "request". Change to the correct kernel-doc notation for function name separtor. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-01block: blk-mq-sched: delete duplicated wordRandy Dunlap1-1/+1
Drop the repeated word "to". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-01block: blk-mq: delete duplicated wordRandy Dunlap1-1/+1
Drop the repeated word "the". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-01block: genhd: delete duplicated wordsRandy Dunlap1-3/+3
Drop the repeated word "to" in multiple places. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-01block: elevator: delete duplicated word and fix typosRandy Dunlap1-2/+2
Drop the repeated word "the". Fix typos of "features" and "specified". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-01block: bio: delete duplicated wordsRandy Dunlap1-2/+2
Drop the repeated words "a" and "the". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-01block: bfq-iosched: fix duplicated wordRandy Dunlap1-1/+1
Change "at at" to "at a". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-30iocost: Fix check condition of iocg abs_vdebtChengming Zhou1-1/+1
We shouldn't skip iocg when its abs_vdebt is not zero. Fixes: 0b80f9866e6b ("iocost: protect iocg->abs_vdebt with iocg->waitq.lock") Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-29iocost: Use sequence counter with associated spinlockAhmed S. Darwish1-3/+2
A sequence counter write side critical section must be protected by some form of locking to serialize writers. A plain seqcount_t does not contain the information of which lock must be held when entering a write side critical section. Use the new seqcount_spinlock_t data type, which allows to associate a spinlock with the sequence counter. This enables lockdep to verify that the spinlock used for writer serialization is held when the write side critical section is entered. If lockdep is disabled this lock association is compiled out and has neither storage size nor runtime overhead. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Wagner <dwagner@suse.de> Link: https://lkml.kernel.org/r/20200720155530.1173732-21-a.darwish@linutronix.de
2020-07-28block: Use non _rcu version of list functions for tag_set_listDaniel Wagner1-2/+2
tag_set_list is only accessed under the tag_set_lock lock. There is no need for using the _rcu list functions. The _rcu list function were introduced to allow read access to the tag_set_list protected under RCU, see 705cda97ee3a ("blk-mq: Make it safe to use RCU to iterate over blk_mq_tag_set.tag_list") and 05b79413946d ("Revert "blk-mq: don't handle TAG_SHARED in restart""). Those changes got reverted later but the cleanup commit missed a couple of places to undo the changes. Fixes: 97889f9ac24f ("blk-mq: remove synchronize_rcu() from blk_mq_del_queue_tag_set()" Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-25scsi: block: pm: Simplify resume handlingAlan Stern1-19/+22
Commit 05d18ae1cc8a ("scsi: pm: Balance pm_only counter of request queue during system resume") fixed a problem in the block layer's runtime-PM code: blk_set_runtime_active() failed to call blk_clear_pm_only(). However, the commit's implementation was awkward; it forced the SCSI system-resume handler to choose whether to call blk_post_runtime_resume() or blk_set_runtime_active(), depending on whether or not the SCSI device had previously been runtime suspended. This patch simplifies the situation considerably by adding the missing function call directly into blk_set_runtime_active() (under the condition that the queue is not already in the RPM_ACTIVE state). This allows the SCSI routine to revert back to its original form. Furthermore, making this change reveals that blk_post_runtime_resume() (in its success pathway) does exactly the same thing as blk_set_runtime_active(). The duplicate code is easily removed by making one routine call the other. No functional changes are intended. Link: https://lore.kernel.org/r/20200706151436.GA702867@rowland.harvard.edu CC: Can Guo <cang@codeaurora.org> CC: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-21block: remove blk_queue_stack_limitsChristoph Hellwig1-11/+0
This function is just a tiny wrapper around blk_stack_limits. Open code it int the two callers. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-21block: remove bdev_stack_limitsChristoph Hellwig1-23/+2
This function is just a tiny wrapper around blk_stack_limit and has two callers. Simplify the stack a bit by open coding it in the two callers. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-21block: inherit the zoned characteristics in blk_stack_limitsChristoph Hellwig1-0/+1
Lift the code from device mapper into blk_stack_limits to inherity the stacking limitations. This ensures we do the right thing for all stacked zoned block devices. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-21Merge branch 'for-5.9/drivers' into for-5.9/block-mergeJens Axboe3-2/+31
* for-5.9/drivers: (38 commits) block: add max_active_zones to blk-sysfs block: add max_open_zones to blk-sysfs s390/dasd: Use struct_size() helper s390/dasd: fix inability to use DASD with DIAG driver md-cluster: fix wild pointer of unlock_all_bitmaps() md/raid5-cache: clear MD_SB_CHANGE_PENDING before flushing stripes md: fix deadlock causing by sysfs_notify md: improve io stats accounting md: raid0/linear: fix dereference before null check on pointer mddev rsxx: switch from 'pci_free_consistent()' to 'dma_free_coherent()' nvme: remove ns->disk checks nvme-pci: use standard block status symbolic names nvme-pci: use the consistent return type of nvme_pci_iod_alloc_size() nvme-pci: add a blank line after declarations nvme-pci: fix some comments issues nvme-pci: remove redundant segment validation nvme: document quirked Intel models nvme: expose reconnect_delay and ctrl_loss_tmo via sysfs nvme: support for zoned namespaces nvme: support for multiple Command Sets Supported and Effects log pages ...
2020-07-21Merge branch 'for-5.9/block' into for-5.9/block-mergeJens Axboe27-939/+1043
* for-5.9/block: (124 commits) blk-cgroup: show global disk stats in root cgroup io.stat blk-cgroup: make iostat functions visible to stat printing block: improve discard bio alignment in __blkdev_issue_discard() block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers block: defer flush request no matter whether we have elevator block: make blk_timeout_init() static block: remove retry loop in ioc_release_fn() block: remove unnecessary ioc nested locking block: integrate bd_start_claiming into __blkdev_get block: use bd_prepare_to_claim directly in the loop driver block: refactor bd_start_claiming block: simplify the restart case in __blkdev_get Revert "blk-rq-qos: remove redundant finish_wait to rq_qos_wait." block: always remove partitions from blk_drop_partitions() block: relax jiffies rounding for timeouts blk-mq: remove redundant validation in __blk_mq_end_request() blk-mq: Remove unnecessary local variable writeback: remove bdi->congested_fn writeback: remove struct bdi_writeback_congested writeback: remove {set,clear}_wb_congested ...
2020-07-18blk-cgroup: show global disk stats in root cgroup io.statBoris Burkov2-5/+56
In order to improve consistency and usability in cgroup stat accounting, we would like to support the root cgroup's io.stat. Since the root cgroup has processes doing io even if the system has no explicitly created cgroups, we need to be careful to avoid overhead in that case. For that reason, the rstat algorithms don't handle the root cgroup, so just turning the file on wouldn't give correct statistics. To get around this, we simulate flushing the iostat struct by filling it out directly from global disk stats. The result is a root cgroup io.stat file consistent with both /proc/diskstats and io.stat. Note that in order to collect the disk stats, we needed to iterate over devices. To facilitate that, we had to change the linkage of a disk_type to external so that it can be used from blk-cgroup.c to iterate over disks. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Boris Burkov <boris@bur.io> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-18blk-cgroup: make iostat functions visible to stat printingBoris Burkov1-71/+71
Previously, the code which printed io.stat only needed access to the generic rstat flushing code, but since we plan to write some more specific code for preparing root cgroup stats, we need to manipulate iostat structs directly. Since declaring static functions ahead does not seem like common practice in this file, simply move the iostat functions up. We only plan to use blkg_iostat_set, but it seems better to keep them all together. Signed-off-by: Boris Burkov <boris@bur.io> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-17block: improve discard bio alignment in __blkdev_issue_discard()Coly Li2-3/+42
This patch improves discard bio split for address and size alignment in __blkdev_issue_discard(). The aligned discard bio may help underlying device controller to perform better discard and internal garbage collection, and avoid unnecessary internal fragment. Current discard bio split algorithm in __blkdev_issue_discard() may have non-discarded fregment on device even the discard bio LBA and size are both aligned to device's discard granularity size. Here is the example steps on how to reproduce the above problem. - On a VMWare ESXi 6.5 update3 installation, create a 51GB virtual disk with thin mode and give it to a Linux virtual machine. - Inside the Linux virtual machine, if the 50GB virtual disk shows up as /dev/sdb, fill data into the first 50GB by, # dd if=/dev/zero of=/dev/sdb bs=4096 count=13107200 - Discard the 50GB range from offset 0 on /dev/sdb, # blkdiscard /dev/sdb -o 0 -l 53687091200 - Observe the underlying mapping status of the device # sg_get_lba_status /dev/sdb -m 1048 --lba=0 descriptor LBA: 0x0000000000000000 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000000000800 blocks: 16773120 deallocated descriptor LBA: 0x0000000000fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000001000000 blocks: 8386560 deallocated descriptor LBA: 0x00000000017ff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000001800000 blocks: 8386560 deallocated descriptor LBA: 0x0000000001fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000002000000 blocks: 8386560 deallocated descriptor LBA: 0x00000000027ff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000002800000 blocks: 8386560 deallocated descriptor LBA: 0x0000000002fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000003000000 blocks: 8386560 deallocated descriptor LBA: 0x00000000037ff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000003800000 blocks: 8386560 deallocated descriptor LBA: 0x0000000003fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000004000000 blocks: 8386560 deallocated descriptor LBA: 0x00000000047ff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000004800000 blocks: 8386560 deallocated descriptor LBA: 0x0000000004fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000005000000 blocks: 8386560 deallocated descriptor LBA: 0x00000000057ff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000005800000 blocks: 8386560 deallocated descriptor LBA: 0x0000000005fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000006000000 blocks: 6291456 deallocated descriptor LBA: 0x0000000006600000 blocks: 0 deallocated Although the discard bio starts at LBA 0 and has 50<<30 bytes size which are perfect aligned to the discard granularity, from the above list these are many 1MB (2048 sectors) internal fragments exist unexpectedly. The problem is in __blkdev_issue_discard(), an improper algorithm causes an improper bio size which is not aligned. 25 int __blkdev_issue_discard(struct block_device *bdev, sector_t sector, 26 sector_t nr_sects, gfp_t gfp_mask, int flags, 27 struct bio **biop) 28 { 29 struct request_queue *q = bdev_get_queue(bdev); [snipped] 56 57 while (nr_sects) { 58 sector_t req_sects = min_t(sector_t, nr_sects, 59 bio_allowed_max_sectors(q)); 60 61 WARN_ON_ONCE((req_sects << 9) > UINT_MAX); 62 63 bio = blk_next_bio(bio, 0, gfp_mask); 64 bio->bi_iter.bi_sector = sector; 65 bio_set_dev(bio, bdev); 66 bio_set_op_attrs(bio, op, 0); 67 68 bio->bi_iter.bi_size = req_sects << 9; 69 sector += req_sects; 70 nr_sects -= req_sects; [snipped] 79 } 80 81 *biop = bio; 82 return 0; 83 } 84 EXPORT_SYMBOL(__blkdev_issue_discard); At line 58-59, to discard a 50GB range, req_sects is set as return value of bio_allowed_max_sectors(q), which is 8388607 sectors. In the above case, the discard granularity is 2048 sectors, although the start LBA and discard length are aligned to discard granularity, req_sects never has chance to be aligned to discard granularity. This is why there are some still-mapped 2048 sectors fragment in every 4 or 8 GB range. If req_sects at line 58 is set to a value aligned to discard_granularity and close to UNIT_MAX, then all consequent split bios inside device driver are (almostly) aligned to discard_granularity of the device queue. The 2048 sectors still-mapped fragment will disappear. This patch introduces bio_aligned_discard_max_sectors() to return the the value which is aligned to q->limits.discard_granularity and closest to UINT_MAX. Then this patch replaces bio_allowed_max_sectors() with this new routine to decide a more proper split bio length. But we still need to handle the situation when discard start LBA is not aligned to q->limits.discard_granularity, otherwise even the length is aligned, current code may still leave 2048 fragment around every 4GB range. Therefore, to calculate req_sects, firstly the start LBA of discard range is checked (including partition offset), if it is not aligned to discard granularity, the first split location should make sure following bio has bi_sector aligned to discard granularity. Then there won't be still-mapped fragment in the middle of the discard range. The above is how this patch improves discard bio alignment in __blkdev_issue_discard(). Now with this patch, after discard with same command line mentiond previously, sg_get_lba_status returns, descriptor LBA: 0x0000000000000000 blocks: 106954752 deallocated descriptor LBA: 0x0000000006600000 blocks: 0 deallocated We an see there is no 2048 sectors segment anymore, everything is clean. Reported-and-tested-by: Acshai Manoj <acshai.manoj@microfocus.com> Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Xiao Ni <xni@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Enzo Matsumiya <ematsumiya@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-17block: defer flush request no matter whether we have elevatorYufen Yu1-7/+2
Commit 7520872c0cf4 ("block: don't defer flushes on blk-mq + scheduling") tried to fix deadlock for cycled wait between flush requests and data request into flush_data_in_flight. The former holded all driver tags and wait for data request completion, but the latter can not complete for waiting free driver tags. After commit 923218f6166a ("blk-mq: don't allocate driver tag upfront for flush rq"), flush requests will not get driver tag before queuing into flush queue. * With elevator, flush request just get sched_tags before inserting flush queue. It will not get driver tag until issue them to driver. data request on list fq->flush_data_in_flight will complete in the end. * Without elevator, each flush request will get a driver tag when allocate request. Then data request on fq->flush_data_in_flight don't worry about lacking driver tag. In both of these cases, cycled wait cannot be true. So we may allow to defer flush request. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-17block: make blk_timeout_init() staticWei Yongjun1-1/+1
The sparse tool complains as follows: block/blk-timeout.c:93:12: warning: symbol 'blk_timeout_init' was not declared. Should it be static? Function blk_timeout_init() is not used outside of blk-timeout.c, so mark it static. Fixes: 9054650fac24 ("block: relax jiffies rounding for timeouts") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook1-1/+1
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-16block: remove retry loop in ioc_release_fn()John Ogness1-3/+17
The reverse-order double lock dance in ioc_release_fn() is using a retry loop. This is a problem on PREEMPT_RT because it could preempt the task that would release q->queue_lock and thus live lock in the retry loop. RCU is already managing the freeing of the request queue and icq. If the trylock fails, use RCU to guarantee that the request queue and icq are not freed and re-acquire the locks in the correct order, allowing forward progress. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-16block: remove unnecessary ioc nested lockingJohn Ogness1-20/+6
The legacy CFQ IO scheduler could call put_io_context() in its exit_icq() elevator callback. This led to a lockdep warning, which was fixed in commit d8c66c5d5924 ("block: fix lockdep warning on io_context release put_io_context()") by using a nested subclass for the ioc spinlock. However, with commit f382fb0bcef4 ("block: remove legacy IO schedulers") the CFQ IO scheduler no longer exists. The BFQ IO scheduler also implements the exit_icq() elevator callback but does not call put_io_context(). The nested subclass for the ioc spinlock is no longer needed. Since it existed as an exception and no longer applies, remove the nested subclass usage. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-15block: add max_active_zones to blk-sysfsNiklas Cassel1-1/+13
Add a new max_active zones definition in the sysfs documentation. This definition will be common for all devices utilizing the zoned block device support in the kernel. Export max_active_zones according to this new definition for NVMe Zoned Namespace devices, ZAC ATA devices (which are treated as SCSI devices by the kernel), and ZBC SCSI devices. Add the new max_active_zones member to struct request_queue, rather than as a queue limit, since this property cannot be split across stacking drivers. For SCSI devices, even though max active zones is not part of the ZBC/ZAC spec, export max_active_zones as 0, signifying "no limit". Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-15block: add max_open_zones to blk-sysfsNiklas Cassel1-0/+15
Add a new max_open_zones definition in the sysfs documentation. This definition will be common for all devices utilizing the zoned block device support in the kernel. Export max open zones according to this new definition for NVMe Zoned Namespace devices, ZAC ATA devices (which are treated as SCSI devices by the kernel), and ZBC SCSI devices. Add the new max_open_zones member to struct request_queue, rather than as a queue limit, since this property cannot be split across stacking drivers. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-15Revert "blk-rq-qos: remove redundant finish_wait to rq_qos_wait."Jens Axboe1-0/+2
This reverts commit 826f2f48da8c331ac51e1381998d318012d66550. Qian Cai reports that this commit causes stalls with swap. Revert until the reason can be figured out. Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-15block: always remove partitions from blk_drop_partitions()Ming Lei1-2/+0
In theory, when GENHD_FL_NO_PART_SCAN is set, no partitions can be created on one disk. However, ioctl(BLKPG, BLKPG_ADD_PARTITION) doesn't check GENHD_FL_NO_PART_SCAN, so partitions still can be added even though GENHD_FL_NO_PART_SCAN is set. So far blk_drop_partitions() only removes partitions when disk_part_scan_enabled() return true. This way can make ghost partition on loop device after changing/clearing FD in case that PARTSCAN is disabled, such as partitions can be added via 'parted' on loop disk even though GENHD_FL_NO_PART_SCAN is set. Fix this issue by always removing partitions in blk_drop_partitions(), and this way is correct because the current code supposes that no partitions can be added in case of GENHD_FL_NO_PART_SCAN. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-15block: relax jiffies rounding for timeoutsJens Axboe1-2/+20
In doing high IOPS testing, blk-mq is generally pretty well optimized. There are a few things that stuck out as using more CPU than what is really warranted, and one thing is the round_jiffies_up() that we do twice for each request. That accounts for about 0.8% of the CPU in my testing. We can make this cheaper by avoiding an integer division, by just adding a rough HZ mask that we can AND with instead. The timeouts are only on a second granularity already, we don't have to be that accurate here and this patch barely changes that. All we care about is nice grouping. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-10Merge tag 'block-5.8-2020-07-10' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+2
Pull block fixes from Jens Axboe: - Fix for inflight accounting, which affects only dm (Ming) - Fix documentation error for bfq (Yufen) - Fix memory leak for nbd (Zheng) * tag 'block-5.8-2020-07-10' of git://git.kernel.dk/linux-block: nbd: Fix memory leak in nbd_add_socket blk-mq: consider non-idle request as "inflight" in blk_mq_rq_inflight() docs: block: update and fix tiny error for bfq
2020-07-10blk-mq: remove redundant validation in __blk_mq_end_request()Baolin Wang1-2/+1
We've already validated the 'q->elevator' before calling ->ops.completed_request() in blk_mq_sched_completed_request(), thus no need to validate rq->internal_tag again. Rmove it. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-10blk-mq: Remove unnecessary local variableBaolin Wang1-3/+1
Remove unnecessary local variable 'ret' in blk_mq_dispatch_hctx_list(). Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-09writeback: remove struct bdi_writeback_congestedChristoph Hellwig1-17/+2
We never set any congested bits in the group writeback instances of it. And for the simpler bdi-wide case a simple scalar field is all that that is needed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-09md: switch to ->check_events for media change notificationsChristoph Hellwig1-7/+1
md is the last driver using the legacy media_changed method. Switch it over to (not so) new ->clear_events approach, which also removes the need for the ->revalidate_disk method. Signed-off-by: Christoph Hellwig <hch@lst.de> [axboe: remove unused 'bdops' variable in disk_clear_events()] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-09blk-mq: centralise related handling into blk_mq_get_driver_tagMing Lei4-43/+19
Move .nr_active update and request assignment into blk_mq_get_driver_tag(), all are good to do during getting driver tag. Meantime blk-flush related code is simplified and flush request needn't to update the request table manually any more. Signed-off-by: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-09blk-mq: streamline handling of q->mq_ops->queue_rq resultMing Lei1-13/+11
Current handling of q->mq_ops->queue_rq result is a bit ugly: - two branches which needs to 'continue' have to check if the dispatch local list is empty, otherwise one bad request may be retrieved via 'rq = list_first_entry(list, struct request, queuelist);' - the branch of 'if (unlikely(ret != BLK_STS_OK))' isn't easy to follow, since it is actually one error branch. Streamline this handling, so the code becomes more readable, meantime potential kernel oops can be avoided in case that the last request in local dispatch list is failed. Fixes: fc17b6534eb8 ("blk-mq: switch ->queue_rq return value to blk_status_t") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08nvme: support for zoned namespacesKeith Busch1-2/+3
Add support for NVM Express Zoned Namespaces (ZNS) Command Set defined in NVM Express TP4053. Zoned namespaces are discovered based on their Command Set Identifier reported in the namespaces Namespace Identification Descriptor list. A successfully discovered Zoned Namespace will be registered with the block layer as a host managed zoned block device with Zone Append command support. A namespace that does not support append is not supported by the driver. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Javier González <javier.gonz@samsung.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com> Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Keith Busch <keith.busch@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08block: add capacity field to zone descriptorsMatias Bjørling1-0/+1
In the zoned storage model, the sectors within a zone are typically all writeable. With the introduction of the Zoned Namespace (ZNS) Command Set in the NVM Express organization, the model was extended to have a specific writeable capacity. Extend the zone descriptor data structure with a zone capacity field to indicate to the user how many sectors in a zone are writeable. Introduce backward compatibility in the zone report ioctl by extending the zone report header data structure with a flags field to indicate if the capacity field is available. Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Javier González <javier.gonz@samsung.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08Merge tag 'v5.8-rc4' into for-5.9/driversJens Axboe3-11/+19
Merge in 5.8-rc4 for-5.9/block to setup for-5.9/drivers, to provide a clean base and making the life for the NVMe changes easier. Signed-off-by: Jens Axboe <axboe@kernel.dk> * tag 'v5.8-rc4': (732 commits) Linux 5.8-rc4 x86/ldt: use "pr_info_once()" instead of open-coding it badly MIPS: Do not use smp_processor_id() in preemptible code MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen .gitignore: Do not track `defconfig` from `make savedefconfig` io_uring: fix regression with always ignoring signals in io_cqring_wait() x86/ldt: Disable 16-bit segments on Xen PV x86/entry/32: Fix #MC and #DB wiring on x86_32 x86/entry/xen: Route #DB correctly on Xen PV x86/entry, selftests: Further improve user entry sanity checks x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER i2c: mlxcpld: check correct size of maximum RECV_LEN packet i2c: add Kconfig help text for slave mode i2c: slave-eeprom: update documentation i2c: eg20t: Load module automatically if ID matches i2c: designware: platdrv: Set class based on DMI i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665 mm/page_alloc: fix documentation error vmalloc: fix the owner argument for the new __vmalloc_node_range callers mm/cma.c: use exact_nid true to fix possible per-numa cma leak ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 20:39:54 +0300