summaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2021-12-22iocost: Fix divide-by-zero on donation from low hweight cgroupTejun Heo1-1/+8
commit edaa26334c117a584add6053f48d63a988d25a6e upstream. The donation calculation logic assumes that the donor has non-zero after-donation hweight, so the lowest active hweight a donating cgroup can have is 2 so that it can donate 1 while keeping the other 1 for itself. Earlier, we only donated from cgroups with sizable surpluses so this condition was always true. However, with the precise donation algorithm implemented, f1de2439ec43 ("blk-iocost: revamp donation amount determination") made the donation amount calculation exact enabling even low hweight cgroups to donate. This means that in rare occasions, a cgroup with active hweight of 1 can enter donation calculation triggering the following warning and then a divide-by-zero oops. WARNING: CPU: 4 PID: 0 at block/blk-iocost.c:1928 transfer_surpluses.cold+0x0/0x53 [884/94867] ... RIP: 0010:transfer_surpluses.cold+0x0/0x53 Code: 92 ff 48 c7 c7 28 d1 ab b5 65 48 8b 34 25 00 ae 01 00 48 81 c6 90 06 00 00 e8 8b 3f fe ff 48 c7 c0 ea ff ff ff e9 95 ff 92 ff <0f> 0b 48 c7 c7 30 da ab b5 e8 71 3f fe ff 4c 89 e8 4d 85 ed 74 0 4 ... Call Trace: <IRQ> ioc_timer_fn+0x1043/0x1390 call_timer_fn+0xa1/0x2c0 __run_timers.part.0+0x1ec/0x2e0 run_timer_softirq+0x35/0x70 ... iocg: invalid donation weights in /a/b: active=1 donating=1 after=0 Fix it by excluding cgroups w/ active hweight < 2 from donating. Excluding these extreme low hweight donations shouldn't affect work conservation in any meaningful way. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: f1de2439ec43 ("blk-iocost: revamp donation amount determination") Cc: stable@vger.kernel.org # v5.10+ Link: https://lore.kernel.org/r/Ybfh86iSvpWKxhVM@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14block: fix ioprio_get(IOPRIO_WHO_PGRP) vs setuid(2)Davidlohr Bueso1-0/+3
commit e6a59aac8a8713f335a37d762db0dbe80e7f6d38 upstream. do_each_pid_thread(PIDTYPE_PGID) can race with a concurrent change_pid(PIDTYPE_PGID) that can move the task from one hlist to another while iterating. Serialize ioprio_get to take the tasklist_lock in this case, just like it's set counterpart. Fixes: d69b78ba1de (ioprio: grab rcu_read_lock in sys_ioprio_{set,get}()) Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Link: https://lore.kernel.org/r/20211210182058.43417-1-dave@stgolabs.net Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26block: Check ADMIN before NICE for IOPRIO_CLASS_RTAlistair Delva1-1/+8
commit 94c4b4fd25e6c3763941bdec3ad54f2204afa992 upstream. Booting to Android userspace on 5.14 or newer triggers the following SELinux denial: avc: denied { sys_nice } for comm="init" capability=23 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0 Init is PID 0 running as root, so it already has CAP_SYS_ADMIN. For better compatibility with older SEPolicy, check ADMIN before NICE. Fixes: 9d3a39a5f1e4 ("block: grant IOPRIO_CLASS_RT to CAP_SYS_NICE") Signed-off-by: Alistair Delva <adelva@google.com> Cc: Khazhismel Kumykov <khazhy@google.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Serge Hallyn <serge@hallyn.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Paul Moore <paul@paul-moore.com> Cc: selinux@vger.kernel.org Cc: linux-security-module@vger.kernel.org Cc: kernel-team@android.com Cc: stable@vger.kernel.org # v5.14+ Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Serge Hallyn <serge@hallyn.com> Link: https://lore.kernel.org/r/20211115181655.3608659-1-adelva@google.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26blkcg: Remove extra blkcg_bio_issue_initLaibin Qiu1-3/+1
[ Upstream commit b781d8db580c058ecd54ed7d5dde7f8270b25f5b ] KASAN reports a use-after-free report when doing block test: ================================================================== [10050.967049] BUG: KASAN: use-after-free in submit_bio_checks+0x1539/0x1550 [10050.977638] Call Trace: [10050.978190] dump_stack+0x9b/0xce [10050.979674] print_address_description.constprop.6+0x3e/0x60 [10050.983510] kasan_report.cold.9+0x22/0x3a [10050.986089] submit_bio_checks+0x1539/0x1550 [10050.989576] submit_bio_noacct+0x83/0xc80 [10050.993714] submit_bio+0xa7/0x330 [10050.994435] mpage_readahead+0x380/0x500 [10050.998009] read_pages+0x1c1/0xbf0 [10051.002057] page_cache_ra_unbounded+0x4c2/0x6f0 [10051.007413] do_page_cache_ra+0xda/0x110 [10051.008207] force_page_cache_ra+0x23d/0x3d0 [10051.009087] page_cache_sync_ra+0xca/0x300 [10051.009970] generic_file_buffered_read+0xbea/0x2130 [10051.012685] generic_file_read_iter+0x315/0x490 [10051.014472] blkdev_read_iter+0x113/0x1b0 [10051.015300] aio_read+0x2ad/0x450 [10051.023786] io_submit_one+0xc8e/0x1d60 [10051.029855] __se_sys_io_submit+0x125/0x350 [10051.033442] do_syscall_64+0x2d/0x40 [10051.034156] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [10051.048733] Allocated by task 18598: [10051.049482] kasan_save_stack+0x19/0x40 [10051.050263] __kasan_kmalloc.constprop.1+0xc1/0xd0 [10051.051230] kmem_cache_alloc+0x146/0x440 [10051.052060] mempool_alloc+0x125/0x2f0 [10051.052818] bio_alloc_bioset+0x353/0x590 [10051.053658] mpage_alloc+0x3b/0x240 [10051.054382] do_mpage_readpage+0xddf/0x1ef0 [10051.055250] mpage_readahead+0x264/0x500 [10051.056060] read_pages+0x1c1/0xbf0 [10051.056758] page_cache_ra_unbounded+0x4c2/0x6f0 [10051.057702] do_page_cache_ra+0xda/0x110 [10051.058511] force_page_cache_ra+0x23d/0x3d0 [10051.059373] page_cache_sync_ra+0xca/0x300 [10051.060198] generic_file_buffered_read+0xbea/0x2130 [10051.061195] generic_file_read_iter+0x315/0x490 [10051.062189] blkdev_read_iter+0x113/0x1b0 [10051.063015] aio_read+0x2ad/0x450 [10051.063686] io_submit_one+0xc8e/0x1d60 [10051.064467] __se_sys_io_submit+0x125/0x350 [10051.065318] do_syscall_64+0x2d/0x40 [10051.066082] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [10051.067455] Freed by task 13307: [10051.068136] kasan_save_stack+0x19/0x40 [10051.068931] kasan_set_track+0x1c/0x30 [10051.069726] kasan_set_free_info+0x1b/0x30 [10051.070621] __kasan_slab_free+0x111/0x160 [10051.071480] kmem_cache_free+0x94/0x460 [10051.072256] mempool_free+0xd6/0x320 [10051.072985] bio_free+0xe0/0x130 [10051.073630] bio_put+0xab/0xe0 [10051.074252] bio_endio+0x3a6/0x5d0 [10051.074984] blk_update_request+0x590/0x1370 [10051.075870] scsi_end_request+0x7d/0x400 [10051.076667] scsi_io_completion+0x1aa/0xe50 [10051.077503] scsi_softirq_done+0x11b/0x240 [10051.078344] blk_mq_complete_request+0xd4/0x120 [10051.079275] scsi_mq_done+0xf0/0x200 [10051.080036] virtscsi_vq_done+0xbc/0x150 [10051.080850] vring_interrupt+0x179/0x390 [10051.081650] __handle_irq_event_percpu+0xf7/0x490 [10051.082626] handle_irq_event_percpu+0x7b/0x160 [10051.083527] handle_irq_event+0xcc/0x170 [10051.084297] handle_edge_irq+0x215/0xb20 [10051.085122] asm_call_irq_on_stack+0xf/0x20 [10051.085986] common_interrupt+0xae/0x120 [10051.086830] asm_common_interrupt+0x1e/0x40 ================================================================== Bio will be checked at beginning of submit_bio_noacct(). If bio needs to be throttled, it will start the timer and stop submit bio directly. Bio will submit in blk_throtl_dispatch_work_fn() when the timer expires. But in the current process, if bio is throttled, it will still set bio issue->value by blkcg_bio_issue_init(). This is redundant and may cause the above use-after-free. CPU0 CPU1 submit_bio submit_bio_noacct submit_bio_checks blk_throtl_bio() <=mod_timer(&sq->pending_timer blk_throtl_dispatch_work_fn submit_bio_noacct() <= bio have throttle tag, will throw directly and bio issue->value will be set here bio_endio() bio_put() bio_free() <= free this bio blkcg_bio_issue_init(bio) <= bio has been freed and will lead to UAF return BLK_QC_T_NONE Fix this by remove extra blkcg_bio_issue_init. Fixes: e439bedf6b24 (blkcg: consolidate bio_issue_init() to be a part of core) Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> Link: https://lore.kernel.org/r/20211112093354.3581504-1-qiulaibin@huawei.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18block: remove inaccurate requeue checkJens Axboe1-1/+0
[ Upstream commit 037057a5a979c7eeb2ee5d12cf4c24b805192c75 ] This check is meant to catch cases where a requeue is attempted on a request that is still inserted. It's never really been useful to catch any misuse, and now it's actively wrong. Outside of that, this should not be a BUG_ON() to begin with. Remove the check as it's now causing active harm, as requeue off the plug path will trigger it even though the request state is just fine. Reported-by: Yi Zhang <yi.zhang@redhat.com> Link: https://lore.kernel.org/linux-block/CAHj4cs80zAUc2grnCZ015-2Rvd-=gXRfB_dFKy=RTm+wRo09HQ@mail.gmail.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18block: bump max plugged deferred size from 16 to 32Jens Axboe2-2/+8
[ Upstream commit ba0ffdd8ce48ad7f7e85191cd29f9674caca3745 ] Particularly for NVMe with efficient deferred submission for many requests, there are nice benefits to be seen by bumping the default max plug count from 16 to 32. This is especially true for virtualized setups, where the submit part is more expensive. But can be noticed even on native hardware. Reduce the multiple queue factor from 4 to 2, since we're changing the default size. While changing it, move the defines into the block layer private header. These aren't values that anyone outside of the block layer uses, or should use. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18block: schedule queue restart after BLK_STS_ZONE_RESOURCENaohiro Aota1-4/+9
[ Upstream commit 9586e67b911c95ba158fcc247b230e9c2d718623 ] When dispatching a zone append write request to a SCSI zoned block device, if the target zone of the request is already locked, the device driver will return BLK_STS_ZONE_RESOURCE and the request will be pushed back to the hctx dipatch queue. The queue will be marked as RESTART in dd_finish_request() and restarted in __blk_mq_free_request(). However, this restart applies to the hctx of the completed request. If the requeued request is on a different hctx, dispatch will no be retried until another request is submitted or the next periodic queue run triggers, leading to up to 30 seconds latency for the requeued request. Fix this problem by scheduling a queue restart similarly to the BLK_STS_RESOURCE case or when we cannot get the budget. Also, consolidate the checks into the "need_resource" variable to simplify the condition. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Link: https://lore.kernel.org/r/20211026165127.4151055-1-naohiro.aota@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27block: decode QUEUE_FLAG_HCTX_ACTIVE in debugfs outputJohannes Thumshirn1-0/+1
[ Upstream commit 1dbdd99b511c966be9147ad72991a2856ac76f22 ] While debugging an issue we've found that $DEBUGFS/block/$disk/state doesn't decode QUEUE_FLAG_HCTX_ACTIVE but only displays its numerical value. Add QUEUE_FLAG(HCTX_ACTIVE) to the blk_queue_flag_name array so it'll get decoded properly. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/4351076388918075bd80ef07756f9d2ce63be12c.1633332053.git.johannes.thumshirn@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-06Revert "block, bfq: honor already-setup queue merges"Jens Axboe1-13/+3
[ Upstream commit ebc69e897e17373fbe1daaff1debaa77583a5284 ] This reverts commit 2d52c58b9c9bdae0ca3df6a1eab5745ab3f7d80b. We have had several folks complain that this causes hangs for them, which is especially problematic as the commit has also hit stable already. As no resolution seems to be forthcoming right now, revert the patch. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214503 Fixes: 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-30blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pdLi Jinlin1-0/+8
[ Upstream commit 858560b27645e7e97aca37ee8f232cccd658fbd2 ] KASAN reports a use-after-free report when doing fuzz test: [693354.104835] ================================================================== [693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160 [693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338 [693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147 [693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018 [693354.105612] Call Trace: [693354.105621] dump_stack+0xf1/0x19b [693354.105626] ? show_regs_print_info+0x5/0x5 [693354.105634] ? printk+0x9c/0xc3 [693354.105638] ? cpumask_weight+0x1f/0x1f [693354.105648] print_address_description+0x70/0x360 [693354.105654] kasan_report+0x1b2/0x330 [693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105670] bfq_io_set_weight_legacy+0xd3/0x160 [693354.105675] ? bfq_cpd_init+0x20/0x20 [693354.105683] cgroup_file_write+0x3aa/0x510 [693354.105693] ? ___slab_alloc+0x507/0x540 [693354.105698] ? cgroup_file_poll+0x60/0x60 [693354.105702] ? 0xffffffff89600000 [693354.105708] ? usercopy_abort+0x90/0x90 [693354.105716] ? mutex_lock+0xef/0x180 [693354.105726] kernfs_fop_write+0x1ab/0x280 [693354.105732] ? cgroup_file_poll+0x60/0x60 [693354.105738] vfs_write+0xe7/0x230 [693354.105744] ksys_write+0xb0/0x140 [693354.105749] ? __ia32_sys_read+0x50/0x50 [693354.105760] do_syscall_64+0x112/0x370 [693354.105766] ? syscall_return_slowpath+0x260/0x260 [693354.105772] ? do_page_fault+0x9b/0x270 [693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0 [693354.105784] ? enter_from_user_mode+0x30/0x30 [693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.105875] Allocated by task 1453337: [693354.106001] kasan_kmalloc+0xa0/0xd0 [693354.106006] kmem_cache_alloc_node_trace+0x108/0x220 [693354.106010] bfq_pd_alloc+0x96/0x120 [693354.106015] blkcg_activate_policy+0x1b7/0x2b0 [693354.106020] bfq_create_group_hierarchy+0x1e/0x80 [693354.106026] bfq_init_queue+0x678/0x8c0 [693354.106031] blk_mq_init_sched+0x1f8/0x460 [693354.106037] elevator_switch_mq+0xe1/0x240 [693354.106041] elevator_switch+0x25/0x40 [693354.106045] elv_iosched_store+0x1a1/0x230 [693354.106049] queue_attr_store+0x78/0xb0 [693354.106053] kernfs_fop_write+0x1ab/0x280 [693354.106056] vfs_write+0xe7/0x230 [693354.106060] ksys_write+0xb0/0x140 [693354.106064] do_syscall_64+0x112/0x370 [693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106114] Freed by task 1453336: [693354.106225] __kasan_slab_free+0x130/0x180 [693354.106229] kfree+0x90/0x1b0 [693354.106233] blkcg_deactivate_policy+0x12c/0x220 [693354.106238] bfq_exit_queue+0xf5/0x110 [693354.106241] blk_mq_exit_sched+0x104/0x130 [693354.106245] __elevator_exit+0x45/0x60 [693354.106249] elevator_switch_mq+0xd6/0x240 [693354.106253] elevator_switch+0x25/0x40 [693354.106257] elv_iosched_store+0x1a1/0x230 [693354.106261] queue_attr_store+0x78/0xb0 [693354.106264] kernfs_fop_write+0x1ab/0x280 [693354.106268] vfs_write+0xe7/0x230 [693354.106271] ksys_write+0xb0/0x140 [693354.106275] do_syscall_64+0x112/0x370 [693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106329] The buggy address belongs to the object at ffff888be0a35580 which belongs to the cache kmalloc-1k of size 1024 [693354.106736] The buggy address is located 228 bytes inside of 1024-byte region [ffff888be0a35580, ffff888be0a35980) [693354.107114] The buggy address belongs to the page: [693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0 [693354.107606] flags: 0x17ffffc0008100(slab|head) [693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080 [693354.108020] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000 [693354.108278] page dumped because: kasan: bad access detected [693354.108511] Memory state around the buggy address: [693354.108671] ffff888be0a35500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [693354.116396] ffff888be0a35580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.124473] >ffff888be0a35600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.132421] ^ [693354.140284] ffff888be0a35680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.147912] ffff888be0a35700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.155281] ================================================================== blkgs are protected by both queue and blkcg locks and holding either should stabilize them. However, the path of destroying blkg policy data is only protected by queue lock in blkcg_activate_policy()/blkcg_deactivate_policy(). Other tasks can get the blkg policy data before the blkg policy data is destroyed, and use it after destroyed, which will result in a use-after-free. CPU0 CPU1 blkcg_deactivate_policy spin_lock_irq(&q->queue_lock) bfq_io_set_weight_legacy spin_lock_irq(&blkcg->lock) blkg_to_bfqg(blkg) pd_to_bfqg(blkg->pd[pol->plid]) ^^^^^^blkg->pd[pol->plid] != NULL bfqg != NULL pol->pd_free_fn(blkg->pd[pol->plid]) pd_to_bfqg(blkg->pd[pol->plid]) bfqg_put(bfqg) kfree(bfqg) blkg->pd[pol->plid] = NULL spin_unlock_irq(q->queue_lock); bfq_group_set_weight(bfqg, val, 0) bfqg->entity.new_weight ^^^^^^trigger uaf here spin_unlock_irq(&blkcg->lock); Fix by grabbing the matching blkcg lock before trying to destroy blkg policy data. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Li Jinlin <lijinlin3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20210914042605.3260596-1-lijinlin3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-30block: flush the integrity workqueue in blk_integrity_unregisterLihong Kou1-0/+3
[ Upstream commit 3df49967f6f1d2121b0c27c381ca1c8386b1dab9 ] When the integrity profile is unregistered there can still be integrity reads queued up which could see a NULL verify_fn as shown by the race window below: CPU0 CPU1 process_one_work nvme_validate_ns bio_integrity_verify_fn nvme_update_ns_info nvme_update_disk_info blk_integrity_unregister ---set queue->integrity as 0 bio_integrity_process --access bi->profile->verify_fn(bi is a pointer of queue->integity) Before calling blk_integrity_unregister in nvme_update_disk_info, we must make sure that there is no work item in the kintegrityd_wq. Just call blk_flush_integrity to flush the work queue so the bug can be resolved. Signed-off-by: Lihong Kou <koulihong@huawei.com> [hch: split up and shortened the changelog] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Link: https://lore.kernel.org/r/20210914070657.87677-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-30block: check if a profile is actually registered in blk_integrity_unregisterChristoph Hellwig1-1/+5
[ Upstream commit 783a40a1b3ac7f3714d2776fa8ac8cce3535e4f6 ] While clearing the profile itself is harmless, we really should not clear the stable writes flag if it wasn't set due to a registered integrity profile. Reported-by: Lihong Kou <koulihong@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Link: https://lore.kernel.org/r/20210914070657.87677-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-30blk-mq: avoid to iterate over stale requestMing Lei1-1/+1
[ Upstream commit 67f3b2f822b7e71cfc9b42dbd9f3144fa2933e0b ] blk-mq can't run allocating driver tag and updating ->rqs[tag] atomically, meantime blk-mq doesn't clear ->rqs[tag] after the driver tag is released. So there is chance to iterating over one stale request just after the tag is allocated and before updating ->rqs[tag]. scsi_host_busy_iter() calls scsi_host_check_in_flight() to count scsi in-flight requests after scsi host is blocked, so no new scsi command can be marked as SCMD_STATE_INFLIGHT. However, driver tag allocation still can be run by blk-mq core. One request is marked as SCMD_STATE_INFLIGHT, but this request may have been kept in another slot of ->rqs[], meantime the slot can be allocated out but ->rqs[] isn't updated yet. Then this in-flight request is counted twice as SCMD_STATE_INFLIGHT. This way causes trouble in handling scsi error. Fixes the issue by not iterating over stale request. Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Reported-by: luojiaxing <luojiaxing@huawei.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210906065003.439019-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-30treewide: Change list_sort to use const pointersSami Tolvanen2-2/+4
[ Upstream commit 4f0f586bf0c898233d8f316f471a21db2abd522d ] list_sort() internally casts the comparison function passed to it to a different type with constant struct list_head pointers, and uses this pointer to call the functions, which trips indirect call Control-Flow Integrity (CFI) checking. Instead of removing the consts, this change defines the list_cmp_func_t type and changes the comparison function types of all list_sort() callers to use const pointers, thus avoiding type mismatches. Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queuesSong Liu1-1/+13
[ Upstream commit 7f2a6a69f7ced6db8220298e0497cf60482a9d4b ] Limiting number of request to BLK_MAX_REQUEST_COUNT at blk_plug hurts performance for large md arrays. [1] shows resync speed of md array drops for md array with more than 16 HDDs. Fix this by allowing more request at plug queue. The multiple_queue flag is used to only apply higher limit to multiple queue cases. [1] https://lore.kernel.org/linux-raid/CAFDAVznS71BXW8Jxv6k9dXc2iR3ysX3iZRBww_rzA8WifBFxGg@mail.gmail.com/ Tested-by: Marcin Wanat <marcin.wanat@gmail.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()Li Jinlin1-0/+1
[ Upstream commit 884f0e84f1e3195b801319c8ec3d5774e9bf2710 ] The pending timer has been set up in blk_throtl_init(). However, the timer is not deleted in blk_throtl_exit(). This means that the timer handler may still be running after freeing the timer, which would result in a use-after-free. Fix by calling del_timer_sync() to delete the timer in blk_throtl_exit(). Signed-off-by: Li Jinlin <lijinlin3@huawei.com> Link: https://lore.kernel.org/r/20210907121242.2885564-1-lijinlin3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22block, bfq: honor already-setup queue mergesPaolo Valente1-3/+13
[ Upstream commit 2d52c58b9c9bdae0ca3df6a1eab5745ab3f7d80b ] The function bfq_setup_merge prepares the merging between two bfq_queues, say bfqq and new_bfqq. To this goal, it assigns bfqq->new_bfqq = new_bfqq. Then, each time some I/O for bfqq arrives, the process that generated that I/O is disassociated from bfqq and associated with new_bfqq (merging is actually a redirection). In this respect, bfq_setup_merge increases new_bfqq->ref in advance, adding the number of processes that are expected to be associated with new_bfqq. Unfortunately, the stable-merging mechanism interferes with this setup. After bfqq->new_bfqq has been set by bfq_setup_merge, and before all the expected processes have been associated with bfqq->new_bfqq, bfqq may happen to be stably merged with a different queue than the current bfqq->new_bfqq. In this case, bfqq->new_bfqq gets changed. So, some of the processes that have been already accounted for in the ref counter of the previous new_bfqq will not be associated with that queue. This creates an unbalance, because those references will never be decremented. This commit fixes this issue by reestablishing the previous, natural behaviour: once bfqq->new_bfqq has been set, it will not be changed until all expected redirections have occurred. Signed-off-by: Davide Zini <davidezini2@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20210802141352.74353-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-18scsi: bsg: Remove support for SCSI_IOCTL_SEND_COMMANDChristoph Hellwig1-1/+4
[ Upstream commit beec64d0c9749afedf51c3c10cf52de1d9a89cc0 ] SCSI_IOCTL_SEND_COMMAND has been deprecated longer than bsg exists and has been warning for just as long. More importantly it harcodes SCSI CDBs and thus will do the wrong thing on non-SCSI bsg nodes. Link: https://lore.kernel.org/r/20210724072033.1284840-2-hch@lst.de Fixes: aa387cc89567 ("block: add bsg helper library") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-18block: bfq: fix bfq_set_next_ioprio_data()Damien Le Moal1-1/+1
commit a680dd72ec336b81511e3bff48efac6dbfa563e7 upstream. For a request that has a priority level equal to or larger than IOPRIO_BE_NR, bfq_set_next_ioprio_data() prints a critical warning but defaults to setting the request new_ioprio field to IOPRIO_BE_NR. This is not consistent with the warning and the allowed values for priority levels. Fix this by setting the request new_ioprio field to IOPRIO_BE_NR - 1, the lowest priority level allowed. Cc: <stable@vger.kernel.org> Fixes: aee69d78dec0 ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler") Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210811033702.368488-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-18blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMINNiklas Cassel1-3/+0
commit 4d643b66089591b4769bcdb6fd1bfeff2fe301b8 upstream. A user space process should not need the CAP_SYS_ADMIN capability set in order to perform a BLKREPORTZONE ioctl. Getting the zone report is required in order to get the write pointer. Neither read() nor write() requires CAP_SYS_ADMIN, so it is reasonable that a user space process that can read/write from/to the device, also can get the write pointer. (Since e.g. writes have to be at the write pointer.) Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Aravind Ramesh <aravind.ramesh@wdc.com> Reviewed-by: Adam Manzanares <a.manzanares@samsung.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: stable@vger.kernel.org # v4.10+ Link: https://lore.kernel.org/r/20210811110505.29649-3-Niklas.Cassel@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-18blk-zoned: allow zone management send operations without CAP_SYS_ADMINNiklas Cassel1-3/+0
commit ead3b768bb51259e3a5f2287ff5fc9041eb6f450 upstream. Zone management send operations (BLKRESETZONE, BLKOPENZONE, BLKCLOSEZONE and BLKFINISHZONE) should be allowed under the same permissions as write(). (write() does not require CAP_SYS_ADMIN). Additionally, other ioctls like BLKSECDISCARD and BLKZEROOUT only check if the fd was successfully opened with FMODE_WRITE. (They do not require CAP_SYS_ADMIN). Currently, zone management send operations require both CAP_SYS_ADMIN and that the fd was successfully opened with FMODE_WRITE. Remove the CAP_SYS_ADMIN requirement, so that zone management send operations match the access control requirement of write(), BLKSECDISCARD and BLKZEROOUT. Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Aravind Ramesh <aravind.ramesh@wdc.com> Reviewed-by: Adam Manzanares <a.manzanares@samsung.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: stable@vger.kernel.org # v4.10+ Link: https://lore.kernel.org/r/20210811110505.29649-2-Niklas.Cassel@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-15bio: fix page leak bio_add_hw_page failurePavel Begunkov1-2/+13
commit d9cf3bd531844ffbfe94b16e417037a16efc988d upstream. __bio_iov_append_get_pages() doesn't put not appended pages on bio_add_hw_page() failure, so potentially leaking them, fix it. Also, do the same for __bio_iov_iter_get_pages(), even though it looks like it can't be triggered by userspace in this case. Fixes: 0512a75b98f8 ("block: Introduce REQ_OP_ZONE_APPEND") Cc: stable@vger.kernel.org # 5.8+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/1edfa6a2ffd66d55e6345a477df5387d2c1415d0.1626653825.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-15blk-crypto: fix check for too-large dun_bytesEric Biggers1-1/+1
[ Upstream commit cc40b7225151f611ef837f6403cfaeadc7af214a ] dun_bytes needs to be less than or equal to the IV size of the encryption mode, not just less than or equal to BLK_CRYPTO_MAX_IV_SIZE. Currently this doesn't matter since blk_crypto_init_key() is never actually passed invalid values, but we might as well fix this. Fixes: a892c8d52c02 ("block: Inline encryption support for blk-mq") Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20210825055918.51975-1-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-15block: return ELEVATOR_DISCARD_MERGE if possibleMing Lei4-16/+8
[ Upstream commit 866663b7b52d2da267b28e12eed89ee781b8fed1 ] When merging one bio to request, if they are discard IO and the queue supports multi-range discard, we need to return ELEVATOR_DISCARD_MERGE because both block core and related drivers(nvme, virtio-blk) doesn't handle mixed discard io merge(traditional IO merge together with discard merge) well. Fix the issue by returning ELEVATOR_DISCARD_MERGE in this situation, so both blk-mq and drivers just need to handle multi-range discard. Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Fixes: 2705dfb20947 ("block: fix discard request merge") Link: https://lore.kernel.org/r/20210729034226.1591070-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-15blk-throtl: optimize IOPS throttle for large IO scenariosChunguang Xu3-0/+36
[ Upstream commit 4f1e9630afe6332de7286820fedd019f19eac057 ] After patch 54efd50 (block: make generic_make_request handle arbitrarily sized bios), the IO through io-throttle may be larger, and these IOs may be further split into more small IOs. However, IOPS throttle does not seem to be aware of this change, which makes the calculation of IOPS of large IOs incomplete, resulting in disk-side IOPS that does not meet expectations. Maybe we should fix this problem. We can reproduce it by set max_sectors_kb of disk to 128, set blkio.write_iops_throttle to 100, run a dd instance inside blkio and use iostat to watch IOPS: dd if=/dev/zero of=/dev/sdb bs=1M count=1000 oflag=direct As a result, without this change the average IOPS is 1995, with this change the IOPS is 98. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/65869aaad05475797d63b4c3fed4f529febe3c26.1627876014.git.brookxu@tencent.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-12blk-mq: clearing flush request reference in tags->rqs[]Ming Lei1-1/+34
commit 364b61818f65045479e42e76ed8dd6f051778280 upstream. Before we free request queue, clearing flush request reference in tags->rqs[], so that potential UAF can be avoided. Based on one patch written by David Jeffery. Tested-by: John Garry <john.garry@huawei.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210511152236.763464-5-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-12blk-mq: fix is_flush_rqMing Lei3-6/+7
commit a9ed27a764156929efe714033edb3e9023c5f321 upstream. is_flush_rq() is called from bt_iter()/bt_tags_iter(), and runs the following check: hctx->fq->flush_rq == req but the passed hctx from bt_iter()/bt_tags_iter() may be NULL because: 1) memory re-order in blk_mq_rq_ctx_init(): rq->mq_hctx = data->hctx; ... refcount_set(&rq->ref, 1); OR 2) tag re-use and ->rqs[] isn't updated with new request. Fix the issue by re-writing is_flush_rq() as: return rq->end_io == flush_end_io; which turns out simpler to follow and immune to data race since we have ordered WRITE rq->end_io and refcount_set(&rq->ref, 1). Fixes: 2e315dc07df0 ("blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter") Cc: "Blank-Burian, Markus, Dr." <blankburian@uni-muenster.de> Cc: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210818010925.607383-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Cc: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-12blk-mq: fix kernel panic during iterating over flush requestMing Lei2-1/+8
commit c2da19ed50554ce52ecbad3655c98371fe58599f upstream. For fixing use-after-free during iterating over requests, we grabbed request's refcount before calling ->fn in commit 2e315dc07df0 ("blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter"). Turns out this way may cause kernel panic when iterating over one flush request: 1) old flush request's tag is just released, and this tag is reused by one new request, but ->rqs[] isn't updated yet 2) the flush request can be re-used for submitting one new flush command, so blk_rq_init() is called at the same time 3) meantime blk_mq_queue_tag_busy_iter() is called, and old flush request is retrieved from ->rqs[tag]; when blk_mq_put_rq_ref() is called, flush_rq->end_io may not be updated yet, so NULL pointer dereference is triggered in blk_mq_put_rq_ref(). Fix the issue by calling refcount_set(&flush_rq->ref, 1) after flush_rq->end_io is set. So far the only other caller of blk_rq_init() is scsi_ioctl_reset() in which the request doesn't enter block IO stack and the request reference count isn't used, so the change is safe. Fixes: 2e315dc07df0 ("blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter") Reported-by: "Blank-Burian, Markus, Dr." <blankburian@uni-muenster.de> Tested-by: "Blank-Burian, Markus, Dr." <blankburian@uni-muenster.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/20210811142624.618598-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Cc: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-03blk-mq: don't grab rq's refcount in blk_mq_check_expired()Ming Lei1-25/+5
[ Upstream commit c797b40ccc340b8a66f7a7842aecc90bf749f087 ] Inside blk_mq_queue_tag_busy_iter() we already grabbed request's refcount before calling ->fn(), so needn't to grab it one more time in blk_mq_check_expired(). Meantime remove extra request expire check in blk_mq_check_expired(). Cc: Keith Busch <kbusch@kernel.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/20210811155202.629575-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03blk-iocost: fix lockdep warning on blkcg->lockMing Lei1-4/+4
[ Upstream commit 11431e26c9c43fa26f6b33ee1a90989f57b86024 ] blkcg->lock depends on q->queue_lock which may depend on another driver lock required in irq context, one example is dm-thin: Chain exists of: &pool->lock#3 --> &q->queue_lock --> &blkcg->lock Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&blkcg->lock); local_irq_disable(); lock(&pool->lock#3); lock(&q->queue_lock); <Interrupt> lock(&pool->lock#3); Fix the issue by using spin_lock_irq(&blkcg->lock) in ioc_weight_write(). Cc: Tejun Heo <tj@kernel.org> Reported-by: Bruno Goncalves <bgoncalv@redhat.com> Link: https://lore.kernel.org/linux-block/CA+QYu4rzz6079ighEanS3Qq_Dmnczcf45ZoJoHKVLVATTo1e4Q@mail.gmail.com/T/#u Signed-off-by: Ming Lei <ming.lei@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20210803070608.1766400-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12blk-iolatency: error out if blk_get_queue() failed in iolatency_set_limit()Yu Kuai1-1/+5
[ Upstream commit 8d75d0eff6887bcac7225e12b9c75595e523d92d ] If queue is dying while iolatency_set_limit() is in progress, blk_get_queue() won't increment the refcount of the queue. However, blk_put_queue() will still decrement the refcount later, which will cause the refcout to be unbalanced. Thus error out in such case to fix the problem. Fixes: 8c772a9bfc7c ("blk-iolatency: fix IO hang due to negative inflight counter") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20210805124645.543797-1-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04blk-iocost: fix operation ordering in iocg_wake_fn()Tejun Heo1-5/+6
commit 5ab189cf3abbc9994bae3be524c5b88589ed56e2 upstream. iocg_wake_fn() open-codes wait_queue_entry removal and wakeup because it wants the wq_entry to be always removed whether it ended up waking the task or not. finish_wait() tests whether wq_entry needs removal without grabbing the wait_queue lock and expects the waker to use list_del_init_careful() after all waking operations are complete, which iocg_wake_fn() didn't do. The operation order was wrong and the regular list_del_init() was used. The result is that if a waiter wakes up racing the waker, it can free pop the wq_entry off stack before the waker is still looking at it, which can lead to a backtrace like the following. [7312084.588951] general protection fault, probably for non-canonical address 0x586bf4005b2b88: 0000 [#1] SMP ... [7312084.647079] RIP: 0010:queued_spin_lock_slowpath+0x171/0x1b0 ... [7312084.858314] Call Trace: [7312084.863548] _raw_spin_lock_irqsave+0x22/0x30 [7312084.872605] try_to_wake_up+0x4c/0x4f0 [7312084.880444] iocg_wake_fn+0x71/0x80 [7312084.887763] __wake_up_common+0x71/0x140 [7312084.895951] iocg_kick_waitq+0xe8/0x2b0 [7312084.903964] ioc_rqos_throttle+0x275/0x650 [7312084.922423] __rq_qos_throttle+0x20/0x30 [7312084.930608] blk_mq_make_request+0x120/0x650 [7312084.939490] generic_make_request+0xca/0x310 [7312084.957600] submit_bio+0x173/0x200 [7312084.981806] swap_readpage+0x15c/0x240 [7312084.989646] read_swap_cache_async+0x58/0x60 [7312084.998527] swap_cluster_readahead+0x201/0x320 [7312085.023432] swapin_readahead+0x2df/0x450 [7312085.040672] do_swap_page+0x52f/0x820 [7312085.058259] handle_mm_fault+0xa16/0x1420 [7312085.066620] do_page_fault+0x2c6/0x5c0 [7312085.074459] page_fault+0x2f/0x40 Fix it by switching to list_del_init_careful() and putting it at the end. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Rik van Riel <riel@surriel.com> Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20partitions: msdos: fix one-byte get_unaligned()Arnd Bergmann3-17/+12
[ Upstream commit 1b1774998b2dec837a57d729d1a22e5eb2d6d206 ] A simplification of get_unaligned() clashes with callers that pass in a character pointer, causing a harmless warning like: block/partitions/msdos.c: In function 'msdos_partition': include/asm-generic/unaligned.h:13:22: warning: 'packed' attribute ignored for field of type 'u8' {aka 'unsigned char'} [-Wattributes] Remove the SYS_IND() macro with the get_unaligned() call and just use the ->ind field directly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19rq-qos: fix missed wake-ups in rq_qos_throttle try twoJan Kara1-2/+2
commit 11c7aa0ddea8611007768d3e6b58d45dc60a19e1 upstream. Commit 545fbd0775ba ("rq-qos: fix missed wake-ups in rq_qos_throttle") tried to fix a problem that a process could be sleeping in rq_qos_wait() without anyone to wake it up. However the fix is not complete and the following can still happen: CPU1 (waiter1) CPU2 (waiter2) CPU3 (waker) rq_qos_wait() rq_qos_wait() acquire_inflight_cb() -> fails acquire_inflight_cb() -> fails completes IOs, inflight decreased prepare_to_wait_exclusive() prepare_to_wait_exclusive() has_sleeper = !wq_has_single_sleeper() -> true as there are two sleepers has_sleeper = !wq_has_single_sleeper() -> true io_schedule() io_schedule() Deadlock as now there's nobody to wakeup the two waiters. The logic automatically blocking when there are already sleepers is really subtle and the only way to make it work reliably is that we check whether there are some waiters in the queue when adding ourselves there. That way, we are guaranteed that at least the first process to enter the wait queue will recheck the waiting condition before going to sleep and thus guarantee forward progress. Fixes: 545fbd0775ba ("rq-qos: fix missed wake-ups in rq_qos_throttle") CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210607112613.25344-1-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14blk-mq: update hctx->dispatch_busy in case of real schedulerMing Lei1-3/+0
[ Upstream commit cb9516be7708a2a18ec0a19fe3a225b5b3bc92c7 ] Commit 6e6fcbc27e77 ("blk-mq: support batching dispatch in case of io") starts to support io batching submission by using hctx->dispatch_busy. However, blk_mq_update_dispatch_busy() isn't changed to update hctx->dispatch_busy in that commit, so fix the issue by updating hctx->dispatch_busy in case of real scheduler. Reported-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Fixes: 6e6fcbc27e77 ("blk-mq: support batching dispatch in case of io") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210625020248.1630497-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14blk-wbt: make sure throttle is enabled properlyZhang Yi1-1/+5
[ Upstream commit 76a8040817b4b9c69b53f9b326987fa891b4082a ] After commit a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt"), if throttle was disabled by wbt_disable_default(), we could not enable again, fix this by set enable_state back to WBT_STATE_ON_DEFAULT. Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210619093700.920393-3-yi.zhang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14blk-wbt: introduce a new disable state to prevent false positive by ↵Zhang Yi2-2/+4
rwb_enabled() [ Upstream commit 1d0903d61e9645c6330b94247b96dd873dfc11c8 ] Now that we disable wbt by simply zero out rwb->wb_normal in wbt_disable_default() when switch elevator to bfq, but it's not safe because it will become false positive if we change queue depth. If it become false positive between wbt_wait() and wbt_track() when submit write request, it will lead to drop rqw->inflight to -1 in wbt_done(), which will end up trigger IO hung. Fix this issue by introduce a new state which mean the wbt was disabled. Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210619093700.920393-2-yi.zhang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14block: avoid double io accounting for flush requestMing Lei1-2/+1
[ Upstream commit 84da7acc3ba53af26f15c4b0ada446127b7a7836 ] For flush request, rq->end_io() may be called two times, one is from timeout handling(blk_mq_check_expired()), another is from normal completion(__blk_mq_end_request()). Move blk_account_io_flush() after flush_rq->ref drops to zero, so io accounting can be done just once for flush request. Fixes: b68663186577 ("block: add iostat counters for flush requests") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: John Garry <john.garry@huawei.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210511152236.763464-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14block: fix discard request mergeMing Lei1-2/+6
[ Upstream commit 2705dfb2094777e405e065105e307074af8965c1 ] ll_new_hw_segment() is reached only in case of single range discard merge, and we don't have max discard segment size limit actually, so it is wrong to run the following check: if (req->nr_phys_segments + nr_phys_segs > blk_rq_get_max_segments(req)) it may be always false since req->nr_phys_segments is initialized as one, and bio's segment count is still 1, blk_rq_get_max_segments(reg) is 1 too. Fix the issue by not doing the check and bypassing the calculation of discard request's nr_phys_segments. Based on analysis from Wang Shanker. Cc: Christoph Hellwig <hch@lst.de> Reported-by: Wang Shanker <shankerwangmiao@gmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210628023312.1903255-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14block: fix race between adding/removing rq qos and normal IOMing Lei1-0/+24
[ Upstream commit 2cafe29a8d03f02a3d16193bdaae2f3e82a423f9 ] Yi reported several kernel panics on: [16687.001777] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... [16687.163549] pc : __rq_qos_track+0x38/0x60 or [ 997.690455] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... [ 997.850347] pc : __rq_qos_done+0x2c/0x50 Turns out it is caused by race between adding rq qos(wbt) and normal IO because rq_qos_add can be run when IO is being submitted, fix this issue by freezing queue before adding/deleting rq qos to queue. rq_qos_exit() needn't to freeze queue because it is called after queue has been frozen. iolatency calls rq_qos_add() during allocating queue, so freezing won't add delay because queue usage refcount works at atomic mode at that time. iocost calls rq_qos_add() when writing cgroup attribute file, that is fine to freeze queue at that time since we usually freeze queue when storing to queue sysfs attribute, meantime iocost only exists on the root cgroup. wbt_init calls it in blk_register_queue() and queue sysfs attribute store(queue_wb_lat_store() when write it 1st time in case of !BLK_WBT_MQ), the following patch will speedup the queue freezing in wbt_init. Reported-by: Yi Zhang <yi.zhang@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Yi Zhang <yi.zhang@redhat.com> Link: https://lore.kernel.org/r/20210609015822.103433-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14blk-mq: clear stale request in tags->rq[] before freeing one request poolMing Lei3-7/+54
[ Upstream commit bd63141d585bef14f4caf111f6d0e27fe2300ec6 ] refcount_inc_not_zero() in bt_tags_iter() still may read one freed request. Fix the issue by the following approach: 1) hold a per-tags spinlock when reading ->rqs[tag] and calling refcount_inc_not_zero in bt_tags_iter() 2) clearing stale request referred via ->rqs[tag] before freeing request pool, the per-tags spinlock is held for clearing stale ->rq[tag] So after we cleared stale requests, bt_tags_iter() won't observe freed request any more, also the clearing will wait for pending request reference. The idea of clearing ->rqs[] is borrowed from John Garry's previous patch and one recent David's patch. Tested-by: John Garry <john.garry@huawei.com> Reviewed-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210511152236.763464-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iterMing Lei3-16/+43
[ Upstream commit 2e315dc07df009c3e29d6926871f62a30cfae394 ] Grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter(), and this way will prevent the request from being re-used when ->fn is running. The approach is same as what we do during handling timeout. Fix request use-after-free(UAF) related with completion race or queue releasing: - If one rq is referred before rq->q is frozen, then queue won't be frozen before the request is released during iteration. - If one rq is referred after rq->q is frozen, refcount_inc_not_zero() will return false, and we won't iterate over this request. However, still one request UAF not covered: refcount_inc_not_zero() may read one freed request, and it will be handled in next patch. Tested-by: John Garry <john.garry@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210511152236.763464-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19blk-mq: Swap two calls in blk_mq_exit_queue()Bart Van Assche1-2/+4
[ Upstream commit 630ef623ed26c18a457cdc070cf24014e50129c2 ] If a tag set is shared across request queues (e.g. SCSI LUNs) then the block layer core keeps track of the number of active request queues in tags->active_queues. blk_mq_tag_busy() and blk_mq_tag_idle() update that atomic counter if the hctx flag BLK_MQ_F_TAG_QUEUE_SHARED is set. Make sure that blk_mq_exit_queue() calls blk_mq_tag_idle() before that flag is cleared by blk_mq_del_queue_tag_set(). Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Fixes: 0d2602ca30e4 ("blk-mq: improve support for shared tags maps") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210513171529.7977-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19blk-mq: plug request for shared sbitmapMing Lei1-2/+3
[ Upstream commit 03f26d8f11403295de445b6e4e0e57ac57755791 ] In case of shared sbitmap, request won't be held in plug list any more sine commit 32bc15afed04 ("blk-mq: Facilitate a shared sbitmap per tagset"), this way makes request merge from flush plug list & batching submission not possible, so cause performance regression. Yanhui reports performance regression when running sequential IO test(libaio, 16 jobs, 8 depth for each job) in VM, and the VM disk is emulated with image stored on xfs/megaraid_sas. Fix the issue by recovering original behavior to allow to hold request in plug list. Cc: Yanhui Ma <yama@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: kashyap.desai@broadcom.com Fixes: 32bc15afed04 ("blk-mq: Facilitate a shared sbitmap per tagset") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210514022052.1047665-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19kyber: fix out of bounds access when preemptedOmar Sandoval4-9/+10
[ Upstream commit efed9a3337e341bd0989161b97453b52567bc59d ] __blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx for the current CPU again and uses that to get the corresponding Kyber context in the passed hctx. However, the thread may be preempted between the two calls to blk_mq_get_ctx(), and the ctx returned the second time may no longer correspond to the passed hctx. This "works" accidentally most of the time, but it can cause us to read garbage if the second ctx came from an hctx with more ctx's than the first one (i.e., if ctx->index_hw[hctx->type] > hctx->nr_ctx). This manifested as this UBSAN array index out of bounds error reported by Jakub: UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9 index 13106 is out of range for type 'long unsigned int [128]' Call Trace: dump_stack+0xa4/0xe5 ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34 queued_spin_lock_slowpath+0x476/0x480 do_raw_spin_lock+0x1c2/0x1d0 kyber_bio_merge+0x112/0x180 blk_mq_submit_bio+0x1f5/0x1100 submit_bio_noacct+0x7b0/0x870 submit_bio+0xc2/0x3a0 btrfs_map_bio+0x4f0/0x9d0 btrfs_submit_data_bio+0x24e/0x310 submit_one_bio+0x7f/0xb0 submit_extent_page+0xc4/0x440 __extent_writepage_io+0x2b8/0x5e0 __extent_writepage+0x28d/0x6e0 extent_write_cache_pages+0x4d7/0x7a0 extent_writepages+0xa2/0x110 do_writepages+0x8f/0x180 __writeback_single_inode+0x99/0x7f0 writeback_sb_inodes+0x34e/0x790 __writeback_inodes_wb+0x9e/0x120 wb_writeback+0x4d2/0x660 wb_workfn+0x64d/0xa10 process_one_work+0x53a/0xa80 worker_thread+0x69/0x5b0 kthread+0x20b/0x240 ret_from_fork+0x1f/0x30 Only Kyber uses the hctx, so fix it by passing the request_queue to ->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can map the queues itself to avoid the mismatch. Fixes: a6088845c2bf ("block: kyber: make kyber more friendly with merging") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Omar Sandoval <osandov@fb.com> Link: https://lore.kernel.org/r/c7598605401a48d5cfeadebb678abd10af22b83f.1620691329.git.osandov@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19blk-iocost: fix weight updates of inner active iocgsTejun Heo1-2/+12
commit e9f4eee9a0023ba22db9560d4cc6ee63f933dae8 upstream. When the weight of an active iocg is updated, weight_updated() is called which in turn calls __propagate_weights() to update the active and inuse weights so that the effective hierarchical weights are update accordingly. The current implementation is incorrect for inner active nodes. For an active leaf iocg, inuse can be any value between 1 and active and the difference represents how much the iocg is donating. When weight is updated, as long as inuse is clamped between 1 and the new weight, we're alright and this is what __propagate_weights() currently implements. However, that's not how an active inner node's inuse is set. An inner node's inuse is solely determined by the ratio between the sums of inuse's and active's of its children - ie. they're results of propagating the leaves' active and inuse weights upwards. __propagate_weights() incorrectly applies the same clamping as for a leaf when an active inner node's weight is updated. Consider a hierarchy which looks like the following with saturating workloads in AA and BB. R / \ A B | | AA BB 1. For both A and B, active=100, inuse=100, hwa=0.5, hwi=0.5. 2. echo 200 > A/io.weight 3. __propagate_weights() update A's active to 200 and leave inuse at 100 as it's already between 1 and the new active, making A:active=200, A:inuse=100. As R's active_sum is updated along with A's active, A:hwa=2/3, B:hwa=1/3. However, because the inuses didn't change, the hwi's remain unchanged at 0.5. 4. The weight of A is now twice that of B but AA and BB still have the same hwi of 0.5 and thus are doing the same amount of IOs. Fix it by making __propgate_weights() always calculate the inuse of an active inner iocg based on the ratio of child_inuse_sum to child_active_sum. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Dan Schatzberg <dschatzberg@fb.com> Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost") Cc: stable@vger.kernel.org # v5.4+ Link: https://lore.kernel.org/r/YJsxnLZV1MnBcqjj@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-28block: return -EBUSY when there are open partitions in blkdev_reread_partChristoph Hellwig1-0/+2
[ Upstream commit 68e6582e8f2dc32fd2458b9926564faa1fb4560e ] The switch to go through blkdev_get_by_dev means we now ignore the return value from bdev_disk_changed in __blkdev_get. Add a manual check to restore the old semantics. Fixes: 4601b4b130de ("block: reopen the device in blkdev_reread_part") Reported-by: Karel Zak <kzak@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210421160502.447418-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-16block: only update parent bi_status when bio failYufen Yu1-1/+1
[ Upstream commit 3edf5346e4f2ce2fa0c94651a90a8dda169565ee ] For multiple split bios, if one of the bio is fail, the whole should return error to application. But we found there is a race between bio_integrity_verify_fn and bio complete, which return io success to application after one of the bio fail. The race as following: split bio(READ) kworker nvme_complete_rq blk_update_request //split error=0 bio_endio bio_integrity_endio queue_work(kintegrityd_wq, &bip->bip_work); bio_integrity_verify_fn bio_endio //split bio __bio_chain_endio if (!parent->bi_status) <interrupt entry> nvme_irq blk_update_request //parent error=7 req_bio_endio bio->bi_status = 7 //parent bio <interrupt exit> parent->bi_status = 0 parent->bi_end_io() // return bi_status=0 The bio has been split as two: split and parent. When split bio completed, it depends on kworker to do endio, while bio_integrity_verify_fn have been interrupted by parent bio complete irq handler. Then, parent bio->bi_status which have been set in irq handler will overwrite by kworker. In fact, even without the above race, we also need to conside the concurrency beteen mulitple split bio complete and update the same parent bi_status. Normally, multiple split bios will be issued to the same hctx and complete from the same irq vector. But if we have updated queue map between multiple split bios, these bios may complete on different hw queue and different irq vector. Then the concurrency update parent bi_status may cause the final status error. Suggested-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210331115359.1125679-1-yuyufen@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30block: recalculate segment count for multi-segment discards correctlyDavid Jeffery1-0/+8
[ Upstream commit a958937ff166fc60d1c3a721036f6ff41bfa2821 ] When a stacked block device inserts a request into another block device using blk_insert_cloned_request, the request's nr_phys_segments field gets recalculated by a call to blk_recalc_rq_segments in blk_cloned_rq_check_limits. But blk_recalc_rq_segments does not know how to handle multi-segment discards. For disk types which can handle multi-segment discards like nvme, this results in discard requests which claim a single segment when it should report several, triggering a warning in nvme and causing nvme to fail the discard from the invalid state. WARNING: CPU: 5 PID: 191 at drivers/nvme/host/core.c:700 nvme_setup_discard+0x170/0x1e0 [nvme_core] ... nvme_setup_cmd+0x217/0x270 [nvme_core] nvme_loop_queue_rq+0x51/0x1b0 [nvme_loop] __blk_mq_try_issue_directly+0xe7/0x1b0 blk_mq_request_issue_directly+0x41/0x70 ? blk_account_io_start+0x40/0x50 dm_mq_queue_rq+0x200/0x3e0 blk_mq_dispatch_rq_list+0x10a/0x7d0 ? __sbitmap_queue_get+0x25/0x90 ? elv_rb_del+0x1f/0x30 ? deadline_remove_request+0x55/0xb0 ? dd_dispatch_request+0x181/0x210 __blk_mq_do_dispatch_sched+0x144/0x290 ? bio_attempt_discard_merge+0x134/0x1f0 __blk_mq_sched_dispatch_requests+0x129/0x180 blk_mq_sched_dispatch_requests+0x30/0x60 __blk_mq_run_hw_queue+0x47/0xe0 __blk_mq_delay_run_hw_queue+0x15b/0x170 blk_mq_sched_insert_requests+0x68/0xe0 blk_mq_flush_plug_list+0xf0/0x170 blk_finish_plug+0x36/0x50 xlog_cil_committed+0x19f/0x290 [xfs] xlog_cil_process_committed+0x57/0x80 [xfs] xlog_state_do_callback+0x1e0/0x2a0 [xfs] xlog_ioend_work+0x2f/0x80 [xfs] process_one_work+0x1b6/0x350 worker_thread+0x53/0x3e0 ? process_one_work+0x350/0x350 kthread+0x11b/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 This patch fixes blk_recalc_rq_segments to be aware of devices which can have multi-segment discards. It calculates the correct discard segment count by counting the number of bio as each discard bio is considered its own segment. Fixes: 1e739730c5b9 ("block: optionally merge discontiguous discard bios into a single request") Signed-off-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Link: https://lore.kernel.org/r/20210211143807.GA115624@redhat Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30block: Suppress uevent for hidden device when removedDaniel Wagner1-3/+1
[ Upstream commit 9ec491447b90ad6a4056a9656b13f0b3a1e83043 ] register_disk() suppress uevents for devices with the GENHD_FL_HIDDEN but enables uevents at the end again in order to announce disk after possible partitions are created. When the device is removed the uevents are still on and user land sees 'remove' messages for devices which were never 'add'ed to the system. KERNEL[95481.571887] remove /devices/virtual/nvme-fabrics/ctl/nvme5/nvme0c5n1 (block) Let's suppress the uevents for GENHD_FL_HIDDEN by not enabling the uevents at all. Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin Wilck <mwilck@suse.com> Link: https://lore.kernel.org/r/20210311151917.136091-1-dwagner@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 16:47:56 +0300