| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This reverts commit 1a721de8489fa559ff4471f73c58bb74ac5580d3.
The commit 1a721de8489f ("block: don't add or resize partition on the disk
with GENHD_FL_NO_PART") and the commit 7777f47f2ea6 ("block: Move checking
GENHD_FL_NO_PART to bdev_add_partition()") used the flag GENHD_FL_NO_PART
to prevent the add or resize of partitions in 5.15 stable kernels.But in
these 5.15 kernels, this is giving an issue with the following error
where the loop driver wants to create a partition when the partscan is
disabled on the loop device:
dd if=/dev/zero of=loopDisk.dsk bs=1M count=1 seek=10240;
losetup -f loopDisk.dsk;parted -s /dev/loop0 -- mklabel gpt mkpart primary
2048s 4096s
1+0 records in
1+0 records out
1048576 bytes (1.0 MB, 1.0 MiB) copied, 0.0016293 s, 644 MB/s
""
Error: Partition(s) 1 on /dev/loop0 have been written, but we have been
unable to inform the kernel of the change, probably because it/they are
in use. As a result, the old partition(s) will remain in use. You should
reboot now before making further changes.
""
If the partition scan is not enabled on the loop device, this flag
GENHD_FL_NO_PART is getting set and when partition creation is tried,
it returns an error EINVAL thereby preventing the creation of partitions.
So, there is no such distinction between disabling of partition scan and
partition creation.
Later in 6.xxx kernels, the commit b9684a71fca7 ("block, loop: support
partitions without scanning") a new flag GD_SUPPRESS_PART_SCAN was
introduced that just disables the partition scan and uses GENHD_FL_NO_PART
only to prevent creating partition scan. So, the partition creationg can
proceed with even if partition scan is disabled.
As the commit b9684a71fca7 ("block, loop: support partitions without
scanning") is not available in 5.15 stable kernel, and since there is no
distinction between disabling of "partition scan" and "partition
creation", we need to revert the commits 1a721de8489f and 7777f47f2ea6
from 5.15 stable kernel to allow partition creation when partscan is
disabled.
Cc: stable@vger.kernel.org
Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 7777f47f2ea64efd1016262e7b59fab34adfb869.
The commit 1a721de8489f ("block: don't add or resize partition on the disk
with GENHD_FL_NO_PART") and the commit 7777f47f2ea6 ("block: Move checking
GENHD_FL_NO_PART to bdev_add_partition()") used the flag GENHD_FL_NO_PART
to prevent the add or resize of partitions in 5.15 stable kernels.But in
these 5.15 kernels, this is giving an issue with the following error
where the loop driver wants to create a partition when the partscan is
disabled on the loop device:
dd if=/dev/zero of=loopDisk.dsk bs=1M count=1 seek=10240;
losetup -f loopDisk.dsk;parted -s /dev/loop0 -- mklabel gpt mkpart primary
2048s 4096s
1+0 records in
1+0 records out
1048576 bytes (1.0 MB, 1.0 MiB) copied, 0.0016293 s, 644 MB/s
""
Error: Partition(s) 1 on /dev/loop0 have been written, but we have been
unable to inform the kernel of the change, probably because it/they are
in use. As a result, the old partition(s) will remain in use. You should
reboot now before making further changes.
""
If the partition scan is not enabled on the loop device, this flag
GENHD_FL_NO_PART is getting set and when partition creation is tried,
it returns an error EINVAL thereby preventing the creation of partitions.
So, there is no such distinction between disabling of partition scan and
partition creation.
Later in 6.xxx kernels, the commit b9684a71fca7 ("block, loop: support
partitions without scanning") a new flag GD_SUPPRESS_PART_SCAN was
introduced that just disables the partition scan and uses GENHD_FL_NO_PART
only to prevent creating partition scan. So, the partition creationg can
proceed with even if partition scan is disabled.
As the commit b9684a71fca7 ("block, loop: support partitions without
scanning") is not available in 5.15 stable kernel, and since there is no
distinction between disabling of "partition scan" and "partition
creation", we need to revert the commits 1a721de8489f and 7777f47f2ea6
from 5.15 stable kernel to allow partition creation when partscan is
disabled.
Cc: stable@vger.kernel.org
Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ccb326b5f9e623eb7f130fbbf2505ec0e2dcaff9 ]
Running syzkaller with the newly reintroduced signed integer overflow
sanitizer shows this report:
[ 62.982337] ------------[ cut here ]------------
[ 62.985692] cgroup: Invalid name
[ 62.986211] UBSAN: signed-integer-overflow in ../block/ioctl.c:36:46
[ 62.989370] 9pnet_fd: p9_fd_create_tcp (7343): problem connecting socket to 127.0.0.1
[ 62.992992] 9223372036854775807 + 4095 cannot be represented in type 'long long'
[ 62.997827] 9pnet_fd: p9_fd_create_tcp (7345): problem connecting socket to 127.0.0.1
[ 62.999369] random: crng reseeded on system resumption
[ 63.000634] GUP no longer grows the stack in syz-executor.2 (7353): 20002000-20003000 (20001000)
[ 63.000668] CPU: 0 PID: 7353 Comm: syz-executor.2 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1
[ 63.000677] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 63.000682] Call Trace:
[ 63.000686] <TASK>
[ 63.000731] dump_stack_lvl+0x93/0xd0
[ 63.000919] __get_user_pages+0x903/0xd30
[ 63.001030] __gup_longterm_locked+0x153e/0x1ba0
[ 63.001041] ? _raw_read_unlock_irqrestore+0x17/0x50
[ 63.001072] ? try_get_folio+0x29c/0x2d0
[ 63.001083] internal_get_user_pages_fast+0x1119/0x1530
[ 63.001109] iov_iter_extract_pages+0x23b/0x580
[ 63.001206] bio_iov_iter_get_pages+0x4de/0x1220
[ 63.001235] iomap_dio_bio_iter+0x9b6/0x1410
[ 63.001297] __iomap_dio_rw+0xab4/0x1810
[ 63.001316] iomap_dio_rw+0x45/0xa0
[ 63.001328] ext4_file_write_iter+0xdde/0x1390
[ 63.001372] vfs_write+0x599/0xbd0
[ 63.001394] ksys_write+0xc8/0x190
[ 63.001403] do_syscall_64+0xd4/0x1b0
[ 63.001421] ? arch_exit_to_user_mode_prepare+0x3a/0x60
[ 63.001479] entry_SYSCALL_64_after_hwframe+0x6f/0x77
[ 63.001535] RIP: 0033:0x7f7fd3ebf539
[ 63.001551] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[ 63.001562] RSP: 002b:00007f7fd32570c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 63.001584] RAX: ffffffffffffffda RBX: 00007f7fd3ff3f80 RCX: 00007f7fd3ebf539
[ 63.001590] RDX: 4db6d1e4f7e43360 RSI: 0000000020000000 RDI: 0000000000000004
[ 63.001595] RBP: 00007f7fd3f1e496 R08: 0000000000000000 R09: 0000000000000000
[ 63.001599] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 63.001604] R13: 0000000000000006 R14: 00007f7fd3ff3f80 R15: 00007ffd415ad2b8
...
[ 63.018142] ---[ end trace ]---
Historically, the signed integer overflow sanitizer did not work in the
kernel due to its interaction with `-fwrapv` but this has since been
changed [1] in the newest version of Clang; It was re-enabled in the
kernel with Commit 557f8c582a9ba8ab ("ubsan: Reintroduce signed overflow
sanitizer").
Let's rework this overflow checking logic to not actually perform an
overflow during the check itself, thus avoiding the UBSAN splat.
[1]: https://github.com/llvm/llvm-project/pull/82432
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240507-b4-sio-block-ioctl-v3-1-ba0c2b32275e@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7777f47f2ea64efd1016262e7b59fab34adfb869 ]
Commit 1a721de8489f ("block: don't add or resize partition on the disk
with GENHD_FL_NO_PART") prevented all operations about partitions on disks
with GENHD_FL_NO_PART in blkpg_do_ioctl() since they are meaningless.
However, it changed error code in some scenarios. So move checking
GENHD_FL_NO_PART to bdev_add_partition() to eliminate impact.
Fixes: 1a721de8489f ("block: don't add or resize partition on the disk with GENHD_FL_NO_PART")
Reported-by: Allison Karlitskaya <allison.karlitskaya@redhat.com>
Closes: https://lore.kernel.org/all/CAOYeF9VsmqKMcQjo1k6YkGNujwN-nzfxY17N3F-CMikE1tYp+w@mail.gmail.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240118130401.792757-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6f64f866aa1ae6975c95d805ed51d7e9433a0016 upstream.
Before calling add partition or resize partition, there is no check
on whether the length is aligned with the logical block size.
If the logical block size of the disk is larger than 512 bytes,
then the partition size maybe not the multiple of the logical block size,
and when the last sector is read, bio_truncate() will adjust the bio size,
resulting in an IO error if the size of the read command is smaller than
the logical block size.If integrity data is supported, this will also
result in a null pointer dereference when calling bio_integrity_free.
Cc: <stable@vger.kernel.org>
Signed-off-by: Min Li <min15.li@samsung.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230629142517.121241-1-min15.li@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1a721de8489fa559ff4471f73c58bb74ac5580d3 ]
Commit a33df75c6328 ("block: use an xarray for disk->part_tbl") remove
disk_expand_part_tbl() in add_partition(), which means all kinds of
devices will support extended dynamic `dev_t`.
However, some devices with GENHD_FL_NO_PART are not expected to add or
resize partition.
Fix this by adding check of GENHD_FL_NO_PART before add or resize
partition.
Fixes: a33df75c6328 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230831075900.1725842-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ccf16413e520164eb718cf8b22a30438da80ff23 upstream.
kernel ulong and compat_ulong_t may not be same width. Use type directly
to eliminate mismatches.
This would result in truncation rather than EFBIG for 32bit mode for
large disks.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220414224056.2875681-1-khazhy@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 35e4c6c1a2fc2eb11b9306e95cda1fa06a511948 upstream.
When BLKZEROOUT ioctl and data read race, the data read leaves stale
page cache. To avoid the stale page cache, hold invalidate_lock of the
block device file mapping. The stale page cache is observed when
blktests test case block/009 is modified to call "blkdiscard -z" command
and repeated hundreds of times.
This patch can be applied back to the stable kernel version v5.15.y.
Rework is required for older stable kernels.
Fixes: 22dd6d356628 ("block: invalidate the page cache when issuing BLKZEROOUT")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: stable@vger.kernel.org # v5.15
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211109104723.835533-3-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7607c44c157d343223510c8ffdf7206fdd2a6213 upstream.
When BLKDISCARD ioctl and data read race, the data read leaves stale
page cache. To avoid the stale page cache, hold invalidate_lock of the
block device file mapping. The stale page cache is observed when
blktests test case block/009 is repeated hundreds of times.
This patch can be applied back to the stable kernel version v5.15.y
with slight patch edit. Rework is required for older stable kernels.
Fixes: 351499a172c0 ("block: Invalidate cache on discard v2")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: stable@vger.kernel.org # v5.15
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211109104723.835533-2-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bdev_resize_partition can only operate on the whole device. Make that clear
by passing a gendisk instead of a block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210810154512.1809898-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bdev_del_partition can only operate on the whole device. Make that clear
by passing a gendisk instead of a block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210810154512.1809898-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bdev_add_partition can only operate on the whole device. Make that clear
by passing a gendisk instead of a block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210810154512.1809898-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just retrieve the bdi from the disk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new BLKGETDISKSEQ ioctl which retrieves the disk sequence number
from the genhd structure.
# ./getdiskseq /dev/loop*
/dev/loop0: 13
/dev/loop0p1: 13
/dev/loop0p2: 13
/dev/loop0p3: 13
/dev/loop1: 14
/dev/loop1p1: 14
/dev/loop1p2: 14
/dev/loop2: 5
/dev/loop3: 6
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-4-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The bd_part_count value only makes sense for whole devices, so move it
to struct gendisk and give it a more descriptive name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210525061301.2242282-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The switch to go through blkdev_get_by_dev means we now ignore the
return value from bdev_disk_changed in __blkdev_get. Add a manual
check to restore the old semantics.
Fixes: 4601b4b130de ("block: reopen the device in blkdev_reread_part")
Reported-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210421160502.447418-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Historically the BLKRRPART ioctls called into the now defunct ->revalidate
method, which caused the sd driver to check if any media is present.
When the ->revalidate method was removed this revalidation was lost,
leading to lots of I/O errors when using the eject command. Fix this by
reopening the device to rescan the partitions, and thus calling the
revalidation logic in the sd driver.
Fixes: 471bd0af544b ("sd: use bdev_check_media_change")
Reported--by: Tom Seewald <tseewald@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Tom Seewald <tseewald@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the policy field to struct block_device and rename it to the
more descriptive bd_read_only. Also turn the field into a bool as it
is used as such.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Switch the block device lookup interfaces to directly work with a dev_t
so that struct block_device references are only acquired by the
blkdev_get variants (and the blk-cgroup special case). This means that
we now don't need an extra reference in the inode and can generally
simplify handling of struct block_device to keep the lookups contained
in the core block layer code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
sector_t is now always a u64, so this check is not needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just open code it in the few callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fold set_device_ro into its only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that all drivers that want to hook into setting or clearing the
read-only flag use the set_read_only method, this code can be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new method to allow for driver-specific processing when setting or
clearing the block device read-only state. This allows to replace the
cumbersome and error-prone override of the whole ioctl implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
BLKFLSBUF is entirely contained in the block core, and there is no
good reason to give the driver a hook into processing it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a littler helper to make the somewhat arcane bd_contains checks a
little more obvious.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use blkdev_get_by_dev instead of bdgrab + blkdev_get.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Discarding blocks and buffers under a mounted filesystem is hardly
anything admin wants to do. Usually it will confuse the filesystem and
sometimes the loss of buffer_head state (including b_private field) can
even cause crashes like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 4 PID: 203778 Comm: jbd2/dm-3-8 Kdump: loaded Tainted: G O --------- - - 4.18.0-147.5.0.5.h126.eulerosv2r9.x86_64 #1
Hardware name: Huawei RH2288H V3/BC11HGSA0, BIOS 1.57 08/11/2015
RIP: 0010:jbd2_journal_grab_journal_head+0x1b/0x40 [jbd2]
...
Call Trace:
__jbd2_journal_insert_checkpoint+0x23/0x70 [jbd2]
jbd2_journal_commit_transaction+0x155f/0x1b60 [jbd2]
kjournald2+0xbd/0x270 [jbd2]
So if we don't have block device open with O_EXCL already, claim the
block device while we truncate buffer cache. This makes sure any
exclusive block device user (such as filesystem) cannot operate on the
device while we are discarding buffer cache.
Reported-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[axboe: fix !CONFIG_BLOCK error in truncate_bdev_range()]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch fixes the following sparse warnings:
block/ioctl.c:209:16: warning: incorrect type in argument 1 (different address spaces)
block/ioctl.c:209:16: expected void const volatile [noderef] <asn:1> *
block/ioctl.c:209:16: got signed int [usertype] *argp
block/ioctl.c:214:16: warning: incorrect type in argument 1 (different address spaces)
block/ioctl.c:214:16: expected void const volatile [noderef] <asn:1> *
block/ioctl.c:214:16: got unsigned int [usertype] *argp
block/ioctl.c:666:40: warning: incorrect type in argument 1 (different address spaces)
block/ioctl.c:666:40: expected signed int [usertype] *argp
block/ioctl.c:666:40: got void [noderef] <asn:1> *argp
block/ioctl.c:672:41: warning: incorrect type in argument 1 (different address spaces)
block/ioctl.c:672:41: expected unsigned int [usertype] *argp
block/ioctl.c:672:41: got void [noderef] <asn:1> *argp
Fixes: 9b81648cb5e3 ("compat_ioctl: simplify up block/ioctl.c")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split each sub-command out into a separate helper, and move those helpers
to block/partitions/core.c instead of having a lot of partition
manipulation logic open coded in block/ioctl.c.
Signed-off-by: Christoph Hellwig <hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
None of this needs to be exposed to drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Having separate implementations of blkdev_ioctl() often leads to these
getting out of sync, despite the comment at the top.
Since most of the ioctl commands are compatible, and we try very hard
not to add any new incompatible ones, move all the common bits into a
shared function and leave only the ones that are historically different
in separate functions for native/compat mode.
To deal with the compat_ptr() conversion, pass both the integer
argument and the pointer argument into the new blkdev_common_ioctl()
and make sure to always use the correct one of these.
blkdev_ioctl() is now only kept as a separate exported interfact
for drivers/char/raw.c, which lacks a compat_ioctl variant.
We should probably either move raw.c to staging if there are no
more users, or export blkdev_compat_ioctl() as well.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There is no need to go through a compat_alloc_user_space()
copy any more, just wrap the function in a small helper that
works the same way for native and compat mode.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Having both in the same file allows a number of simplifications
to the compat path, and makes it more likely that changes to
the native path get applied to the compat version as well.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A lot of block drivers need only a trivial .compat_ioctl callback.
Add a helper function that can be set as the callback pointer
to only convert the argument using the compat_ptr() conversion
and otherwise assume all input and output data is compatible,
or handled using in_compat_syscall() checks.
This mirrors the compat_ptr_ioctl() helper function used in
character devices.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Simplify the arguments to blkdev_nr_zones by passing a gendisk instead
of the block_device and capacity. This also removes the need for
__blkdev_nr_zones as all callers are outside the fast path and can
deal with the additional branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In general drivers should never mess with partition tables directly.
Unfortunately s390 and loop do for somewhat historic reasons, but they
can use bdev_disk_changed directly instead when we export it as they
satisfy the sanity checks we have in __blkdev_reread_part.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com> [dasd]
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We still have to set the capacity to 0 if invalidating or call
revalidate_disk if not even if the disk has no partitions. Fix
that by merging rescan_partitions into bdev_disk_changed and just
stubbing out blk_add_partitions and blk_drop_partitions for
non-partitioned devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A lot of the logic in invalidate_partitions and rescan_partitions is
shared. Merge the two functions to simplify things. There is a small
behavior change in that we now send the kevent change notice also if we
were not invalidating but no partitions were found, which seems like
the right thing to do.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce three new ioctl commands BLKOPENZONE, BLKCLOSEZONE and
BLKFINISHZONE to allow applications to control the condition of zones
on a zoned block device through the execution of the REQ_OP_ZONE_OPEN,
REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH operations.
Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Various block layer files do not have any licensing information at all.
Add SPDX tags for the default kernel GPLv2 license to those.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Get a zoned block device total number of zones. The device can be a
partition of the whole device. The number of zones is always 0 for
regular block devices.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Get a zoned block device zone size in number of 512 B sectors.
The zone size is always 0 for regular block devices.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The 'lend' parameter of truncate_inode_pages_range is required to be
inclusive, so follow the rule.
This patch fixes one memory corruption triggered by discard.
Cc: <stable@vger.kernel.org>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Fixes: 351499a172c0 ("block: Invalidate cache on discard v2")
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Check for CAP_SYS_ADMIN before calling into the driver, similar to
blkdev_flushbuf(). This is safer and can spare a check in the driver.
(Currently BLKROSET is overridden by md and rbd, rbd is missing the
check. md has the check, but it covers a lot more than BLKROSET.)
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It is reasonable drop page cache on discard, otherwise that pages may
be written by writeback second later, so thin provision devices will
not be happy. This seems to be a security leak in case of secure discard case.
Also add check for queue_discard flag on early stage.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that we use the proper REQ_OP_WRITE_ZEROES operation everywhere we can
kill this hack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Turn the existing discard flag into a new BLKDEV_ZERO_UNMAP flag with
similar semantics, but without referring to diѕcard.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
blk_get_backing_dev_info() is now a simple dereference. Remove that
function and simplify some code around that.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
