summaryrefslogtreecommitdiff
path: root/block/genhd.c
AgeCommit message (Collapse)AuthorFilesLines
2026-01-11block: rate-limit capacity change info logLi Chen1-1/+1
commit 3179a5f7f86bcc3acd5d6fb2a29f891ef5615852 upstream. loop devices under heavy stress-ng loop streessor can trigger many capacity change events in a short time. Each event prints an info message from set_capacity_and_notify(), flooding the console and contributing to soft lockups on slow consoles. Switch the printk in set_capacity_and_notify() to pr_info_ratelimited() so frequent capacity changes do not spam the log while still reporting occasional changes. Cc: stable@vger.kernel.org Signed-off-by: Li Chen <chenl311@chinatelecom.cn> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21block: retry call probe after request_module in blk_request_moduleYang Erkun1-5/+17
[ Upstream commit 457ef47c08d2979f3e59ce66267485c3faed70c8 ] Set kernel config: CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_LOOP_MIN_COUNT=0 Do latter: mknod loop0 b 7 0 exec 4<> loop0 Before commit e418de3abcda ("block: switch gendisk lookup to a simple xarray"), lookup_gendisk will first use base_probe to load module loop, and then the retry will call loop_probe to prepare the loop disk. Finally open for this disk will success. However, after this commit, we lose the retry logic, and open will fail with ENXIO. Block device autoloading is deprecated and will be removed soon, but maybe we should keep open success until we really remove it. So, give a retry to fix it. Fixes: e418de3abcda ("block: switch gendisk lookup to a simple xarray") Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Yang Erkun <yangerkun@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20241209110435.3670985-1-yangerkun@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-23block: fix uaf for flush rq while iterating tagsYu Kuai1-6/+3
commit 3802f73bd80766d70f319658f334754164075bc3 upstream. blk_mq_clear_flush_rq_mapping() is not called during scsi probe, by checking blk_queue_init_done(). However, QUEUE_FLAG_INIT_DONE is cleared in del_gendisk by commit aec89dc5d421 ("block: keep q_usage_counter in atomic mode after del_gendisk"), hence for disk like scsi, following blk_mq_destroy_queue() will not clear flush rq from tags->rqs[] as well, cause following uaf that is found by our syzkaller for v6.6: ================================================================== BUG: KASAN: slab-use-after-free in blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 Read of size 4 at addr ffff88811c969c20 by task kworker/1:2H/224909 CPU: 1 PID: 224909 Comm: kworker/1:2H Not tainted 6.6.0-ga836a5060850 #32 Workqueue: kblockd blk_mq_timeout_work Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364 print_report+0x3e/0x70 mm/kasan/report.c:475 kasan_report+0xb8/0xf0 mm/kasan/report.c:588 blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 bt_iter block/blk-mq-tag.c:288 [inline] __sbitmap_for_each_set include/linux/sbitmap.h:295 [inline] sbitmap_for_each_set include/linux/sbitmap.h:316 [inline] bt_for_each+0x455/0x790 block/blk-mq-tag.c:325 blk_mq_queue_tag_busy_iter+0x320/0x740 block/blk-mq-tag.c:534 blk_mq_timeout_work+0x1a3/0x7b0 block/blk-mq.c:1673 process_one_work+0x7c4/0x1450 kernel/workqueue.c:2631 process_scheduled_works kernel/workqueue.c:2704 [inline] worker_thread+0x804/0xe40 kernel/workqueue.c:2785 kthread+0x346/0x450 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 942: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:374 [inline] __kasan_kmalloc mm/kasan/common.c:383 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:380 kasan_kmalloc include/linux/kasan.h:198 [inline] __do_kmalloc_node mm/slab_common.c:1007 [inline] __kmalloc_node+0x69/0x170 mm/slab_common.c:1014 kmalloc_node include/linux/slab.h:620 [inline] kzalloc_node include/linux/slab.h:732 [inline] blk_alloc_flush_queue+0x144/0x2f0 block/blk-flush.c:499 blk_mq_alloc_hctx+0x601/0x940 block/blk-mq.c:3788 blk_mq_alloc_and_init_hctx+0x27f/0x330 block/blk-mq.c:4261 blk_mq_realloc_hw_ctxs+0x488/0x5e0 block/blk-mq.c:4294 blk_mq_init_allocated_queue+0x188/0x860 block/blk-mq.c:4350 blk_mq_init_queue_data block/blk-mq.c:4166 [inline] blk_mq_init_queue+0x8d/0x100 block/blk-mq.c:4176 scsi_alloc_sdev+0x843/0xd50 drivers/scsi/scsi_scan.c:335 scsi_probe_and_add_lun+0x77c/0xde0 drivers/scsi/scsi_scan.c:1189 __scsi_scan_target+0x1fc/0x5a0 drivers/scsi/scsi_scan.c:1727 scsi_scan_channel drivers/scsi/scsi_scan.c:1815 [inline] scsi_scan_channel+0x14b/0x1e0 drivers/scsi/scsi_scan.c:1791 scsi_scan_host_selected+0x2fe/0x400 drivers/scsi/scsi_scan.c:1844 scsi_scan+0x3a0/0x3f0 drivers/scsi/scsi_sysfs.c:151 store_scan+0x2a/0x60 drivers/scsi/scsi_sysfs.c:191 dev_attr_store+0x5c/0x90 drivers/base/core.c:2388 sysfs_kf_write+0x11c/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x3fc/0x610 fs/kernfs/file.c:338 call_write_iter include/linux/fs.h:2083 [inline] new_sync_write+0x1b4/0x2d0 fs/read_write.c:493 vfs_write+0x76c/0xb00 fs/read_write.c:586 ksys_write+0x127/0x250 fs/read_write.c:639 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x78/0xe2 Freed by task 244687: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] __kasan_slab_free+0x12a/0x1b0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1815 [inline] slab_free_freelist_hook mm/slub.c:1841 [inline] slab_free mm/slub.c:3807 [inline] __kmem_cache_free+0xe4/0x520 mm/slub.c:3820 blk_free_flush_queue+0x40/0x60 block/blk-flush.c:520 blk_mq_hw_sysfs_release+0x4a/0x170 block/blk-mq-sysfs.c:37 kobject_cleanup+0x136/0x410 lib/kobject.c:689 kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x119/0x140 lib/kobject.c:737 blk_mq_release+0x24f/0x3f0 block/blk-mq.c:4144 blk_free_queue block/blk-core.c:298 [inline] blk_put_queue+0xe2/0x180 block/blk-core.c:314 blkg_free_workfn+0x376/0x6e0 block/blk-cgroup.c:144 process_one_work+0x7c4/0x1450 kernel/workqueue.c:2631 process_scheduled_works kernel/workqueue.c:2704 [inline] worker_thread+0x804/0xe40 kernel/workqueue.c:2785 kthread+0x346/0x450 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293 Other than blk_mq_clear_flush_rq_mapping(), the flag is only used in blk_register_queue() from initialization path, hence it's safe not to clear the flag in del_gendisk. And since QUEUE_FLAG_REGISTERED already make sure that queue should only be registered once, there is no need to test the flag as well. Fixes: 6cfeadbff3f8 ("blk-mq: don't clear flush_rq from tags->rqs[]") Depends-on: commit aec89dc5d421 ("block: keep q_usage_counter in atomic mode after del_gendisk") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20241104110005.1412161-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: BRUNO VERNAY <bruno.vernay@se.com> Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource@witekio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17blk-integrity: register sysfs attributes on struct deviceThomas Weißschuh1-8/+4
Upstream commit ff53cd52d9bdbf4074d2bbe9b591729997780bd3. The "integrity" kobject only acted as a holder for static sysfs entries. It also was embedded into struct gendisk without managing it, violating assumptions of the driver core. Instead register the sysfs entries directly onto the struct device. Also drop the now unused member integrity_kobj from struct gendisk. Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20230309-kobj_release-gendisk_integrity-v3-3-ceccb4493c46@weissschuh.net Signed-off-by: Jens Axboe <axboe@kernel.dk> [cascardo: conflict because of constification of integrity_ktype] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12block: support to account io_ticks preciselyYu Kuai1-1/+1
[ Upstream commit 99dc422335d8b2bd4d105797241d3e715bae90e9 ] Currently, io_ticks is accounted based on sampling, specifically update_io_ticks() will always account io_ticks by 1 jiffies from bdev_start_io_acct()/blk_account_io_start(), and the result can be inaccurate, for example(HZ is 250): Test script: fio -filename=/dev/sda -bs=4k -rw=write -direct=1 -name=test -thinktime=4ms Test result: util is about 90%, while the disk is really idle. This behaviour is introduced by commit 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting"), however, there was a key point that is missed that this patch also improve performance a lot: Before the commit: part_round_stats: if (part->stamp != now) stats |= 1; part_in_flight() -> there can be lots of task here in 1 jiffies. part_round_stats_single() __part_stat_add() part->stamp = now; After the commit: update_io_ticks: stamp = part->bd_stamp; if (time_after(now, stamp)) if (try_cmpxchg()) __part_stat_add() -> only one task can reach here in 1 jiffies. Hence in order to account io_ticks precisely, we only need to know if there are IO inflight at most once in one jiffies. Noted that for rq-based device, iterating tags should not be used here because 'tags->lock' is grabbed in blk_mq_find_and_get_req(), hence part_stat_lock_inc/dec() and part_in_flight() is used to trace inflight. The additional overhead is quite little: - per cpu add/dec for each IO for rq-based device; - per cpu sum for each jiffies; And it's verified by null-blk that there are no performance degration under heavy IO pressure. Fixes: 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240509123717.3223892-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26block: add check of 'minors' and 'first_minor' in device_add_disk()Li Nan1-1/+3
[ Upstream commit 4c434392c4777881d01beada6701eff8c76b43fe ] 'first_minor' represents the starting minor number of disks, and 'minors' represents the number of partitions in the device. Neither of them can be greater than MINORMASK + 1. Commit e338924bd05d ("block: check minor range in device_add_disk()") only added the check of 'first_minor + minors'. However, their sum might be less than MINORMASK but their values are wrong. Complete the checks now. Fixes: e338924bd05d ("block: check minor range in device_add_disk()") Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231219075942.840255-1-linan666@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26block: Set memalloc_noio to false on device_add_disk() error pathLi Nan1-0/+1
[ Upstream commit 5fa3d1a00c2d4ba14f1300371ad39d5456e890d7 ] On the error path of device_add_disk(), device's memalloc_noio flag was set but not cleared. As the comment of pm_runtime_set_memalloc_noio(), "The function should be called between device_add() and device_del()". Clear this flag before device_del() now. Fixes: 25e823c8c37d ("block/genhd.c: apply pm_runtime_set_memalloc_noio on block devices") Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231211075356.1839282-1-linan666@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19block: fix blktrace debugfs entries leakageYu Kuai1-1/+4
[ Upstream commit dd7de3704af9989b780693d51eaea49a665bd9c2 ] Commit 99d055b4fd4b ("block: remove per-disk debugfs files in blk_unregister_queue") moves blk_trace_shutdown() from blk_release_queue() to blk_unregister_queue(), this is safe if blktrace is created through sysfs, however, there is a regression in corner case. blktrace can still be enabled after del_gendisk() through ioctl if the disk is opened before del_gendisk(), and if blktrace is not shutdown through ioctl before closing the disk, debugfs entries will be leaked. Fix this problem by shutdown blktrace in disk_release(), this is safe because blk_trace_remove() is reentrant. Fixes: 99d055b4fd4b ("block: remove per-disk debugfs files in blk_unregister_queue") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230610022003.2557284-4-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-13block: don't set GD_NEED_PART_SCAN if scan partition failedYu Kuai1-1/+7
[ Upstream commit 3723091ea1884d599cc8b8bf719d6f42e8d4d8b1 ] Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still set, and partition scan will be proceed again when blkdev_get_by_dev() is called. However, this will cause a problem that re-assemble partitioned raid device will creat partition for underlying disk. Test procedure: mdadm -CR /dev/md0 -l 1 -n 2 /dev/sda /dev/sdb -e 1.0 sgdisk -n 0:0:+100MiB /dev/md0 blockdev --rereadpt /dev/sda blockdev --rereadpt /dev/sdb mdadm -S /dev/md0 mdadm -A /dev/md0 /dev/sda /dev/sdb Test result: underlying disk partition and raid partition can be observed at the same time Note that this can still happen in come corner cases that GD_NEED_PART_SCAN can be set for underlying disk while re-assemble raid device. Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again") Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17block: fix wrong mode for blkdev_put() from disk_scan_partitions()Yu Kuai1-1/+1
[ Upstream commit 428913bce1e67ccb4dae317fd0332545bf8c9233 ] If disk_scan_partitions() is called with 'FMODE_EXCL', blkdev_get_by_dev() will be called without 'FMODE_EXCL', however, follow blkdev_put() is still called with 'FMODE_EXCL', which will cause 'bd_holders' counter to leak. Fix the problem by using the right mode for blkdev_put(). Reported-by: syzbot+2bcc0d79e548c4f62a59@syzkaller.appspotmail.com Link: https://lore.kernel.org/lkml/f9649d501bc8c3444769418f6c26263555d9d3be.camel@linux.ibm.com/T/ Tested-by: Julian Ruess <julianr@linux.ibm.com> Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17block: fix scan partition for exclusively open device againYu Kuai1-4/+26
[ Upstream commit e5cfefa97bccf956ea0bb6464c1f6c84fd7a8d9f ] As explained in commit 36369f46e917 ("block: Do not reread partition table on exclusively open device"), reread partition on the device that is exclusively opened by someone else is problematic. This patch will make sure partition scan will only be proceed if current thread open the device exclusively, or the device is not opened exclusively, and in the later case, other scanners and exclusive openers will be blocked temporarily until partition scan is done. Fixes: 10c70d95c0f2 ("block: remove the bd_openers checks in blk_drop_partitions") Cc: <stable@vger.kernel.org> Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230217022200.3092987-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17block: Revert "block: Do not reread partition table on exclusively open device"Yu Kuai1-5/+2
[ Upstream commit 0f77b29ad14e34a89961f32edc87b92db623bb37 ] This reverts commit 36369f46e91785688a5f39d7a5590e3f07981316. This patch can't fix the problem in a corner case that device can be opened exclusively after the checking and before blkdev_get_by_dev(). We'll use a new solution to fix the problem in the next patch, and the new solution doesn't need to change apis. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230217022200.3092987-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Stable-dep-of: e5cfefa97bcc ("block: fix scan partition for exclusively open device again") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-04block: Do not reread partition table on exclusively open deviceJan Kara1-2/+5
commit 36369f46e91785688a5f39d7a5590e3f07981316 upstream. Since commit 10c70d95c0f2 ("block: remove the bd_openers checks in blk_drop_partitions") we allow rereading of partition table although there are users of the block device. This has an undesirable consequence that e.g. if sda and sdb are assembled to a RAID1 device md0 with partitions, BLKRRPART ioctl on sda will rescan partition table and create sda1 device. This partition device under a raid device confuses some programs (such as libstorage-ng used for initial partitioning for distribution installation) leading to failures. Fix the problem refusing to rescan partitions if there is another user that has the block device exclusively open. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20221130135344.2ul4cyfstfs3znxg@quack3 Fixes: 10c70d95c0f2 ("block: remove the bd_openers checks in blk_drop_partitions") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221130175653.24299-1-jack@suse.cz [axboe: fold in followup fix] Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31block: clear ->slave_dir when dropping the main slave_dir referenceChristoph Hellwig1-0/+2
[ Upstream commit d90db3b1c8676bc88b4309c5a571333de2263b8e ] Zero out the pointer to ->slave_dir so that the holder code doesn't incorrectly treat the object as alive when add_disk failed or after del_gendisk was called. Fixes: 89f871af1b26 ("dm: delay registering the gendisk") Reported-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221115141054.1051801-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-31block: Fix possible memory leak for rq_wb on add_disk failureChen Zhongjin1-0/+1
kmemleak reported memory leaks in device_add_disk(): kmemleak: 3 new suspected memory leaks unreferenced object 0xffff88800f420800 (size 512): comm "modprobe", pid 4275, jiffies 4295639067 (age 223.512s) hex dump (first 32 bytes): 04 00 00 00 08 00 00 00 01 00 00 00 00 00 00 00 ................ 00 e1 f5 05 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d3662699>] kmalloc_trace+0x26/0x60 [<00000000edc7aadc>] wbt_init+0x50/0x6f0 [<0000000069601d16>] wbt_enable_default+0x157/0x1c0 [<0000000028fc393f>] blk_register_queue+0x2a4/0x420 [<000000007345a042>] device_add_disk+0x6fd/0xe40 [<0000000060e6aab0>] nbd_dev_add+0x828/0xbf0 [nbd] ... It is because the memory allocated in wbt_enable_default() is not released in device_add_disk() error path. Normally, these memory are freed in: del_gendisk() rq_qos_exit() rqos->ops->exit(rqos); wbt_exit() So rq_qos_exit() is called to free the rq_wb memory for wbt_init(). However in the error path of device_add_disk(), only blk_unregister_queue() is called and make rq_wb memory leaked. Add rq_qos_exit() to the error path to fix it. Fixes: 83cbce957446 ("block: add error handling for device_add_disk / add_disk") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20221029071355.35462-1-chenzhongjin@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-23block: fix memory leak for elevator on add_disk failureYu Kuai1-4/+8
The default elevator is allocated in the beginning of device_add_disk(), however, it's not freed in the following error path. Fixes: 50e34d78815e ("block: disable the elevator int del_gendisk") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20221022021615.2756171-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-10Merge branch 'for-6.1/block' into block-6.1Jens Axboe1-0/+7
Merge in later fixes. * for-6.1/block: block: fix leaking minors of hidden disks block: avoid sign extend problem with default queue flags mask blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init() block: Remove the repeat word 'can' MAINTAINERS: Update SED-Opal Maintainers
2022-10-10block: fix leaking minors of hidden disksChristoph Hellwig1-0/+7
The major/minor of a hidden gendisk is not propagated to the block device because it is never registered using bdev_add. But the lack of bd_dev also causes the dynamic major minor number not to be freed. Assign bd_dev manually to ensure the dynamic major minor gets freed. Based on a patch by Keith Busch. Fixes: 8ddcd653257c ("block: introduce GENHD_FL_HIDDEN") Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20221010131857.748129-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-07Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linuxLinus Torvalds1-3/+4
Pull block updates from Jens Axboe: - NVMe pull requests via Christoph: - handle number of queue changes in the TCP and RDMA drivers (Daniel Wagner) - allow changing the number of queues in nvmet (Daniel Wagner) - also consider host_iface when checking ip options (Daniel Wagner) - don't map pages which can't come from HIGHMEM (Fabio M. De Francesco) - avoid unnecessary flush bios in nvmet (Guixin Liu) - shrink and better pack the nvme_iod structure (Keith Busch) - add comment for unaligned "fake" nqn (Linjun Bao) - print actual source IP address through sysfs "address" attr (Martin Belanger) - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang) - handle effects after freeing the request (Keith Busch) - copy firmware_rev on each init (Keith Busch) - restrict management ioctls to admin (Keith Busch) - ensure subsystem reset is single threaded (Keith Busch) - report the actual number of tagset maps in nvme-pci (Keith Busch) - small fabrics authentication fixups (Christoph Hellwig) - add common code for tagset allocation and freeing (Christoph Hellwig) - stop using the request_queue in nvmet (Christoph Hellwig) - set min_align_mask before calculating max_hw_sectors (Rishabh Bhatnagar) - send a rediscover uevent when a persistent discovery controller reconnects (Sagi Grimberg) - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi) - MD pull request via Song: - Various raid5 fix and clean up, by Logan Gunthorpe and David Sloan. - Raid10 performance optimization, by Yu Kuai. - sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu) - IO scheduler switching quisce fix (Keith) - s390/dasd block driver updates (Stefan) - support for recovery for the ublk driver (ZiyangZhang) - rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph) - blk-mq and null_blk map fixes (Bart) - various bcache fixes (Coly, Jilin, Jules) - nbd signal hang fix (Shigeru) - block writeback throttling fix (Yu) - optimize the passthrough mapping handling (me) - prepare block cgroups to being gendisk based (Christoph) - get rid of an old PSI hack in the block layer, moving it to the callers instead where it belongs (Christoph) - blk-throttle fixes and cleanups (Yu) - misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj, Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming, Miaohe, Bart, Coly, Gaosheng * tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits) sbitmap: fix lockup while swapping block: add rationale for not using blk_mq_plug() when applicable block: adapt blk_mq_plug() to not plug for writes that require a zone lock s390/dasd: use blk_mq_alloc_disk blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep nvmet: don't look at the request_queue in nvmet_bdev_set_limits nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all blk-mq: use quiesced elevator switch when reinitializing queues block: replace blk_queue_nowait with bdev_nowait nvme: remove nvme_ctrl_init_connect_q nvme-loop: use the tagset alloc/free helpers nvme-loop: store the generic nvme_ctrl in set->driver_data nvme-loop: initialize sqsize later nvme-fc: use the tagset alloc/free helpers nvme-fc: store the generic nvme_ctrl in set->driver_data nvme-fc: keep ctrl->sqsize in sync with opts->queue_size nvme-rdma: use the tagset alloc/free helpers nvme-rdma: store the generic nvme_ctrl in set->driver_data nvme-tcp: use the tagset alloc/free helpers nvme-tcp: store the generic nvme_ctrl in set->driver_data ...
2022-09-27blk-throttle: pass a gendisk to blk_throtl_cancel_biosChristoph Hellwig1-1/+1
Pass the gendisk to blk_throtl_cancel_bios as part of moving the blk-cgroup infrastructure to be gendisk based. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andreas Herrmann <aherrmann@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20220921180501.1539876-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-27blk-cgroup: pass a gendisk to blkcg_init_queue and blkcg_exit_queueChristoph Hellwig1-2/+3
Pass the gendisk to blkcg_init_disk and blkcg_exit_disk as part of moving the blk-cgroup infrastructure to be gendisk based. Also remove the rather pointless kerneldoc comments for these internal functions with a single caller each. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andreas Herrmann <aherrmann@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20220921180501.1539876-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-20Revert "block: freeze the queue earlier in del_gendisk"Christoph Hellwig1-1/+2
This reverts commit a09b314005f3a0956ebf56e01b3b80339df577cc. Dusty Mabe reported consistent hang during CoreOS shutdown with a MD RAID1 setup. Although apparently similar hangs happened before, and this patch most likely is not the root cause it made it much more severe. Revert it until we can figure out what is going on with the md driver. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220919144049.978907-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-12block: Do not call blk_put_queue() if gendisk allocation failsRafael Mendonca1-3/+1
Commit 6f8191fdf41d ("block: simplify disk shutdown") removed the call to blk_get_queue() during gendisk allocation but missed to remove the corresponding cleanup code blk_put_queue() for it. Thus, if the gendisk allocation fails, the request_queue refcount gets decremented and reaches 0, causing blk_mq_release() to be called with a hctx still alive. That triggers a WARNING report, as found by syzkaller: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 23016 at block/blk-mq.c:3881 blk_mq_release+0xf8/0x3e0 block/blk-mq.c:3881 [...] stripped RIP: 0010:blk_mq_release+0xf8/0x3e0 block/blk-mq.c:3881 [...] stripped Call Trace: <TASK> blk_release_queue+0x153/0x270 block/blk-sysfs.c:780 kobject_cleanup lib/kobject.c:673 [inline] kobject_release lib/kobject.c:704 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1c8/0x540 lib/kobject.c:721 __alloc_disk_node+0x4f7/0x610 block/genhd.c:1388 __blk_mq_alloc_disk+0x13b/0x1f0 block/blk-mq.c:3961 loop_add+0x3e2/0xaf0 drivers/block/loop.c:1978 loop_control_ioctl+0x133/0x620 drivers/block/loop.c:2150 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] stripped Fixes: 6f8191fdf41d ("block: simplify disk shutdown") Reported-by: syzbot+31c9594f6e43b9289b25@syzkaller.appspotmail.com Suggested-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220811232338.254673-1-rafaelmendsr@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-03block: move ->bio_split to the gendiskChristoph Hellwig1-1/+7
Only non-passthrough requests are split by the block layer and use the ->bio_split bio_set. Move it from the request_queue to the gendisk. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220727162300.3089193-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-21block: call blk_mq_exit_queue from disk_release for never added disksChristoph Hellwig1-0/+15
To undo the all initialization from blk_mq_init_allocated_queue in case of a probe failure where add_disk is never called we have to call blk_mq_exit_queue from put_disk. This relies on the fact that drivers always call blk_mq_free_tag_set after calling put_disk in the probe error path if they have a gendisk at all. We should be doing this in general, but can't do it for the normal teardown case (yet) as the tagset can be gone by the time the disk is released once it was added. I hope to sort this out properly eventually but for now this isolated hack will do it. Fixes: 6f8191fdf41d ("block: simplify disk shutdown") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220720130541.1323531-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14block: remove bdevnameChristoph Hellwig1-23/+0
Replace the remaining calls of bdevname with snprintf using the %pg format specifier. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220713055317.1888500-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-06block: pass a gendisk to blk_queue_free_zone_bitmapsChristoph Hellwig1-1/+1
Switch to a gendisk based API in preparation for moving all zone related fields from the request_queue to the gendisk. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220706070350.1703384-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-06block: call blk_queue_free_zone_bitmaps from disk_releaseChristoph Hellwig1-0/+1
The zone bitmaps are only used for non-passthrough I/O, so free them as soon as the disk is released. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220706070350.1703384-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-28block: simplify blktrace sysfs attribute creationChristoph Hellwig1-0/+3
Add the trace attributes to the default gendisk attributes, just like we already do for partitions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220628171850.1313069-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-28block: remove blk_cleanup_diskChristoph Hellwig1-15/+0
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-28block: simplify disk shutdownChristoph Hellwig1-10/+13
Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for all disks that do not have separately allocated queues, and thus remove the need to call blk_cleanup_queue for them. Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that this function is intended only for separately allocated blk-mq queues. This saves an extra queue freeze for devices without a separately allocated queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-17block: freeze the queue earlier in del_gendiskChristoph Hellwig1-2/+1
Freeze the queue earlier in del_gendisk so that the state does not change while we remove debugfs and sysfs files. Ming mentioned that being able to observer request in debugfs might be useful while the queue is being frozen in del_gendisk, which is made possible by this change. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220614074827.458955-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-17block: disable the elevator int del_gendiskChristoph Hellwig1-28/+11
The elevator is only used for file system requests, which are stopped in del_gendisk. Move disabling the elevator and freeing the scheduler tags to the end of del_gendisk instead of doing that work in disk_release and blk_cleanup_queue to avoid a use after free on q->tag_set from disk_release as the tag_set might not be alive at that point. Move the blk_qos_exit call as well, as it just depends on the elevator exit and would be the only reason to keep the not exactly cheap queue freeze in disk_release. Fixes: e155b0c238b2 ("blk-mq: Use shared tags for shared sbitmap support") Reported-by: syzbot+3e3f419f4a7816471838@syzkaller.appspotmail.com Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: syzbot+3e3f419f4a7816471838@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20220614074827.458955-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-27block, loop: support partitions without scanningChristoph Hellwig1-0/+2
Historically we did distinguish between a flag that surpressed partition scanning, and a combinations of the minors variable and another flag if any partitions were supported. This was generally confusing and doesn't make much sense, but some corner case uses of the loop driver actually do want to support manually added partitions on a device that does not actively scan for partitions. To make things worsee the loop driver also wants to dynamically toggle the scanning for partitions on a live gendisk, which makes the disk->flags updates non-atomic. Introduce a new GD_SUPPRESS_PART_SCAN bit in disk->state that disables just scanning for partitions, and toggle that instead of GENHD_FL_NO_PART in the loop driver. Fixes: 1ebe2e5f9d68 ("block: remove GENHD_FL_EXT_DEVT") Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220527055806.1972352-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-18block: remove queue_discard_alignmentChristoph Hellwig1-1/+1
Just use bdev_alignment_offset in disk_discard_alignment_show instead. That helpers is the same except for an always false branch that doesn't matter in this slow path. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220415045258.199825-20-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-18block: use bdev_alignment_offset in disk_alignment_offset_showChristoph Hellwig1-1/+1
This does the same as the open coded variant except for an extra branch, and allows to remove queue_alignment_offset entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220415045258.199825-18-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-02Merge tag 'for-5.18/block-2022-04-01' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull block fixes from Jens Axboe: "Either fixes or a few additions that got missed in the initial merge window pull. In detail: - List iterator fix to avoid leaking value post loop (Jakob) - One-off fix in minor count (Christophe) - Fix for a regression in how io priority setting works for an exiting task (Jiri) - Fix a regression in this merge window with blkg_free() being called in an inappropriate context (Ming) - Misc fixes (Ming, Tom)" * tag 'for-5.18/block-2022-04-01' of git://git.kernel.dk/linux-block: blk-wbt: remove wbt_track stub block: use dedicated list iterator variable block: Fix the maximum minor value is blk_alloc_ext_minor() block: restore the old set_task_ioprio() behaviour wrt PF_EXITING block: avoid calling blkg_free() in atomic context lib/sbitmap: allocate sb->map via kvzalloc_node
2022-03-28block: Fix the maximum minor value is blk_alloc_ext_minor()Christophe JAILLET1-1/+1
ida_alloc_range(..., min, max, ...) returns values from min to max, inclusive. So, NR_EXT_DEVT is a valid idx returned by blk_alloc_ext_minor(). This is an issue because in device_add_disk(), this value is used in: ddev->devt = MKDEV(disk->major, disk->first_minor); and NR_EXT_DEVT is '(1 << MINORBITS)'. So, should 'disk->first_minor' be NR_EXT_DEVT, it would overflow. Fixes: 22ae8ce8b892 ("block: simplify bdev/disk lookup in blkdev_get") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/cc17199798312406b90834e433d2cefe8266823d.1648306232.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-25Merge tag 'for-5.18/dm-changes' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Significant refactoring and fixing of how DM core does bio-based IO accounting with focus on fixing wildly inaccurate IO stats for dm-crypt (and other DM targets that defer bio submission in their own workqueues). End result is proper IO accounting, made possible by targets being updated to use the new dm_submit_bio_remap() interface. - Add hipri bio polling support (REQ_POLLED) to bio-based DM. - Reduce dm_io and dm_target_io structs so that a single dm_io (which contains dm_target_io and first clone bio) weighs in at 256 bytes. For reference the bio struct is 128 bytes. - Various other small cleanups, fixes or improvements in DM core and targets. - Update MAINTAINERS with my kernel.org email address to allow distinction between my "upstream" and "Red" Hats. * tag 'for-5.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (46 commits) dm: consolidate spinlocks in dm_io struct dm: reduce size of dm_io and dm_target_io structs dm: switch dm_target_io booleans over to proper flags dm: switch dm_io booleans over to proper flags dm: update email address in MAINTAINERS dm: return void from __send_empty_flush dm: factor out dm_io_complete dm cache: use dm_submit_bio_remap dm: simplify dm_sumbit_bio_remap interface dm thin: use dm_submit_bio_remap dm: add WARN_ON_ONCE to dm_submit_bio_remap dm: support bio polling block: add ->poll_bio to block_device_operations dm mpath: use DMINFO instead of printk with KERN_INFO dm: stop using bdevname dm-zoned: remove the ->name field in struct dmz_dev dm: remove unnecessary local variables in __bind dm: requeue IO if mapping table not yet available dm io: remove stale comment block for dm_io() dm thin metadata: remove unused dm_thin_remove_block and __remove ...
2022-03-22Merge tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-blockLinus Torvalds1-5/+62
Pull block updates from Jens Axboe: - BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo) - blk-rq-qos completion fix (Tejun) - blk-cgroup merge fix (Tejun) - Add offline error return value to distinguish it from an IO error on the device (Song) - IO stats fixes (Zhang, Christoph) - blkcg refcount fixes (Ming, Yu) - Fix for indefinite dispatch loop softlockup (Shin'ichiro) - blk-mq hardware queue management improvements (Ming) - sbitmap dead code removal (Ming, John) - Plugging merge improvements (me) - Show blk-crypto capabilities in sysfs (Eric) - Multiple delayed queue run improvement (David) - Block throttling fixes (Ming) - Start deprecating auto module loading based on dev_t (Christoph) - bio allocation improvements (Christoph, Chaitanya) - Get rid of bio_devname (Christoph) - bio clone improvements (Christoph) - Block plugging improvements (Christoph) - Get rid of genhd.h header (Christoph) - Ensure drivers use appropriate flush helpers (Christoph) - Refcounting improvements (Christoph) - Queue initialization and teardown improvements (Ming, Christoph) - Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng, Lukas, Nian, Yang, Eric, Chengming) * tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits) block: cancel all throttled bios in del_gendisk() block: let blkcg_gq grab request queue's refcnt block: avoid use-after-free on throttle data block: limit request dispatch loop duration block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative" sr: simplify the local variable initialization in sr_block_open() block: don't merge across cgroup boundaries if blkcg is enabled block: fix rq-qos breakage from skipping rq_qos_done_bio() block: flush plug based on hardware and software queue order block: ensure plug merging checks the correct queue at least once block: move rq_qos_exit() into disk_release() block: do more work in elevator_exit block: move blk_exit_queue into disk_release block: move q_usage_counter release into blk_queue_release block: don't remove hctx debugfs dir from blk_mq_exit_queue block: move blkcg initialization/destroy into disk allocation/release handler sr: implement ->free_disk to simplify refcounting sd: implement ->free_disk to simplify refcounting sd: delay calling free_opal_dev sd: call sd_zbc_release_disk before releasing the scsi_device reference ...
2022-03-18block: cancel all throttled bios in del_gendisk()Yu Kuai1-0/+3
Throttled bios can't be issued after del_gendisk() is done, thus it's better to cancel them immediately rather than waiting for throttle is done. For example, if user thread is throttled with low bps while it's issuing large io, and the device is deleted. The user thread will wait for a long time for io to return. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220318130144.1066064-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-09block: add ->poll_bio to block_device_operationsMing Lei1-0/+4
Prepare for supporting IO polling for bio-based driver. Add ->poll_bio callback so that bio-based driver can provide their own logic for polling bio. Also fix ->submit_bio_bio typo in comment block above __submit_bio_noacct. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-03-09block: move rq_qos_exit() into disk_release()Ming Lei1-2/+1
Keep all teardown of file system I/O related functionality in one place. There can't be file system I/O in disk_release(), so it is safe to move rq_qos_exit() there. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220308055200.735835-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-09block: do more work in elevator_exitChristoph Hellwig1-3/+0
Move the calls to ioc_clear_queue and blk_mq_sched_free_rqs into elevator_exit. Except for one call where we know we can't have io_cq structures yet these always go together, and that extra call in an error path is harmless. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220308055200.735835-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-09block: move blk_exit_queue into disk_releaseMing Lei1-1/+30
There can't be file system I/O in disk_release(), so move the call to blk_exit_queue() there, preparing to have the teardown of file system I/O only functionality in one place, when the gendisk that is needed for it is torn down. We still need to freeze queue here since the request is freed after the bio is completed and passthrough request rely on scheduler tags as well. The disk can be released before or after queue is cleaned up, and we have to free the scheduler request pool before blk_cleanup_queue returns, while the static request pool has to be freed before exiting the I/O scheduler. Signed-off-by: Ming Lei <ming.lei@redhat.com> [hch: rebased, updated the commit log] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220308055200.735835-13-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-09block: move blkcg initialization/destroy into disk allocation/release handlerMing Lei1-0/+9
blkcg works on FS bio level, so it is reasonable to make both blkcg and gendisk sharing same lifetime. Meantime there won't be any FS IO when releasing disk, so safe to move blkcg initialization/destroy into disk allocation/release handler Long term, we can move blkcg into gendisk completely. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220308055200.735835-10-hch@lst.de [axboe: fixup missing blk-cgroup.h include] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-22block: update io_ticks when io hangZhang Wensheng1-2/+12
When the inflight IOs are slow and no new IOs are issued, we expect iostat could manifest the IO hang problem. However after commit 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting"), io_tick and time_in_queue will not be updated until the end of IO, and the avgqu-sz and %util columns of iostat will be zero. Because it has using stat.nsecs accumulation to express time_in_queue which is not suitable to change, and may %util will express the status better when io hang occur. To fix io_ticks, we use update_io_ticks and inflight to update io_ticks when diskstats_show and part_stat_show been called. Fixes: 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting") Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220217064247.4041435-1-zhangwensheng5@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-17block: fix surprise removal for drivers calling blk_set_queue_dyingChristoph Hellwig1-0/+14
Various block drivers call blk_set_queue_dying to mark a disk as dead due to surprise removal events, but since commit 8e141f9eb803 that doesn't work given that the GD_DEAD flag needs to be set to stop I/O. Replace the driver calls to blk_set_queue_dying with a new (and properly documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the only remaining caller. Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk") Reported-by: Markus Blöchl <markus.bloechl@ipetronik.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-17block: add a ->free_disk methodChristoph Hellwig1-0/+5
Add a method to notify the driver that the gendisk is about to be freed. This allows drivers to tie the lifetime of their private data to that of the gendisk and thus deal with device removal races without expensive synchronization and boilerplate code. A new flag is added so that ->free_disk is only called after a successful call to add_disk, which significantly simplifies the error handling path during probing. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220215094514.3828912-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02block: remove genhd.hChristoph Hellwig1-1/+0
There is no good reason to keep genhd.h separate from the main blkdev.h header that includes it. So fold the contents of genhd.h into blkdev.h and remove genhd.h entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.0) at 2026-04-30 14:02:55 +0300