| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
This is prepare to hiding snd_soc_dapm_context inside soc-dapm.c
|
|
Introduce new MSR registers for AMD hardware feedback support. They provide
workload classification and configuration capabilities.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/20250609200518.3616080-4-superm1@kernel.org
|
|
We have dedictaded bindings for scl/sda nowadays. Switch away from the
deprecated plain 'gpios' property.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
We can use string choices helper, let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Despite its name, kvm_is_device_pfn() is actually used to determine if a
given PFN has a kernel mapping that can be used to perform cache
maintenance, as it calls pfn_is_map_memory() internally.
Expand the helper into its single callsite and further condition the
check on the VMA having either VM_PFNMAP or VM_MIXEDMAP set. VMAs that
set neither of these flags must always contain Normal, struct page
backed memory with valid aliases in the kernel address space.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250705071717.5062-3-ankita@nvidia.com
[ Oliver: fixed typos, refined changelog ]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
To perform cache maintenance on a region of memory, KVM/arm64 relies on
that region having a cacheable alias in the kernel's address space which
can be used with CMO instructions.
The 'device' variable is somewhat of a misnomer, as it actually
indicates whether or not the stage-2 alias is allowed to have cacheable
memory attributes. The resulting stage-2 memory attributes are further
modified by VM_ALLOW_ANY_UNCACHED, selecting between Normal-NC or
Device-nGnRE depending on what the endpoint supports.
Rename the to s2_force_noncacheable such that its purpose is a bit more
obvious.
CC: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250705071717.5062-2-ankita@nvidia.com
[ Oliver: addressed typos, wound up rewriting changelog ]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Selecting the IVC, HSP and BPMP drivers via Kconfig is problematic
because it can create conflicting configurations. Instead, enable them
in the default configuration.
Link: https://lore.kernel.org/r/20250506133118.1011777-12-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add in mt8395-genio-1200-evk devicetree file a sub node in pmic for
the mt6359-keys compatible to add the Power and Home MT6359 PMIC keys
support.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250703-add-mt6359-pmic-keys-support-v1-3-21a4d2774e34@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add in mt8390-genio-common dtsi file the support of Home MT6359 PMIC
key.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250703-add-mt6359-pmic-keys-support-v1-2-21a4d2774e34@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Bananapi R4 has a green and a blue led which can be switched by gpio.
Green led is for running state so default on.
Green led also shares pin with eeprom writeprotect where led off allows
writing to eeprom.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-14-linux@fw-web.de
[Angelo: Fixed missing dt-bindings/leds/common.h header inclusion]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Replace verbatim license text with a `SPDX-License-Identifier`
The comment header mis-attributes this license to be "X11", but the
license text does not include the last line "Except as contained in this
notice, the name of the X Consortium shall not be used in advertising or
otherwise to promote the sale, use or other dealings in this Software
without prior written authorization from the X Consortium.". Therefore,
this license is actually equivalent to the SPDX "MIT" license (confirmed
by text diffing).
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Acked-By: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This adds the USB support for the s32g2 and s32g3 SoCs.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/e3e5041e-254d-44c3-b645-532d4d7a8f9e@sabinyo.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pins were moved from SoC dtsi to Board level dtsi without cleaning up
to needed ones. Drop the unused pins now.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-13-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
CCI requires proc-supply. Add it on board level.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-12-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add cci devicetree node for cpu frequency scaling.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-9-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Introduce ethernet controller nodes to EN7581 SoC and EN7581 evaluation
board.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20250520-en7581-net-v1-1-5317f8e829ad@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
fail-needs-probe
Different Spherion variants use different trackpads on the same I2C2
bus. Instead of enabling all of them by default, mark them as
"fail-needs-probe" and let the implementation determine which one is
actually present.
Additionally, move the trackpad pinctrl entry back to the individual
trackpad nodes.
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250318102259.189289-3-laura.nao@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add a device tree for the MT8186 based Squirtle Chromebooks, also known
as the Acer Chromebook Spin 311 (R724T). The device is a 2-in-1
convertible.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-7-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
There are only two different SKUs of Voltorb, and the only difference
between them is whether a touchscreen is present or not. This can be
detected by a simple I2C transfer to the address, instead of having
separate device trees.
Merge the two device trees together and simplify the compatible string
list. The dtsi is still kept separate since there is an incoming device
that shares the same design, but with slightly difference components.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-6-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Steelix design has two possible trackpad component sources. Currently
they are all marked as available, along with having workarounds for
shared pinctrl muxing and GPIOs.
Instead, mark them all as "fail-needs-probe" and have the implementation
try to probe which one is present.
Also remove the shared resource workaround by moving the pinctrl entry
for the trackpad interrupt line back into the individual trackpad nodes.
Cc: stable+noautosel@kernel.org # Needs accompanying new driver to work
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-5-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into gpio/for-next
Runtime PM updates related to autosuspend for 6.17
Make several autosuspend functions mark last busy stamp and update
the documentation accordingly (Sakari Ailus).
|
|
Immutable branch between GPIO, MFD and ARM-SoC for v6.17-rc1
Remove struct bgpio_pdata after converting its users to generic device
properties.
|
|
LDO5 regulator is used to power the i.MX8MM NVCC_SD2 I/O supply, that is
used for the SD2 card interface and also for some GPIOs.
When the SD card interface is not enabled the regulator subsystem could
turn off this supply, since it is not used anywhere else, however this
will also remove the power to some other GPIOs, for example one I/O that
is used to power the ethernet phy, leading to a non working ethernet
interface.
[ 31.820515] On-module +V3.3_1.8_SD (LDO5): disabling
[ 31.821761] PMIC_USDHC_VSELECT: disabling
[ 32.764949] fec 30be0000.ethernet end0: Link is Down
Fix this keeping the LDO5 supply always on.
Cc: stable@vger.kernel.org
Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Fixes: f5aab0438ef1 ("regulator: pca9450: Fix enable register for LDO5")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The GPIO device in crag6410 is registered with struct bgpio_pdata passed
as platform_data to the gpio-mmio driver. We want to remove the
bgpio_pdata from the kernel and the gpio-mmio driver is now also able to
get the relevant values from the software node. Set up device properties
and switch to using platform_device_info to register the device as
platform_add_devices() doesn't allow us to pass device properties to the
driver model.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250701-gpio-mmio-pdata-v2-5-ebf34d273497@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The two latch GPIO devices in ams-delta are registered with struct
bgpio_pdata passed as platform_data to the gpio-mmio driver. We want to
remove the bgpio_pdata from the kernel and the gpio-mmio driver is now
also able to get the relevant values from the software node. Set up
device properties and switch to using platform_device_info to register
the devices as platform_add_devices() doesn't allow us to pass device
properties to the driver model.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20250701-gpio-mmio-pdata-v2-4-ebf34d273497@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the legacy generic
gpio-reg module to using them. We have to update the two legacy ARM
platforms that use it at the same time as they call the set_multiple()
callbacks directly (they shouldn't but it's old technical debt I
suppose).
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250623-gpiochip-set-rv-gpio-v3-1-90f0e170a846@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
active-low properties
This removes the active-low properties of the PWM-controlled LEDs in
the HiFive Unmatched device tree.
The reference is hifive-unleashed-a00.pdf[0] and hifive-unmatched-schematics-v3.pdf[1].
Link: https://sifive.cdn.prismic.io/sifive/c52a8e32-05ce-4aaf-95c8-7bf8453f8698_hifive-unleashed-a00-schematics-1.pdf [0]
Link: https://sifive.cdn.prismic.io/sifive/6a06d6c0-6e66-49b5-8e9e-e68ce76f4192_hifive-unmatched-schematics-v3.pdf [1]
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Link: https://lore.kernel.org/r/20250529035341.51736-2-nylon.chen@sifive.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Make sure AMD SEV guests using secure TSC, include a TSC_FACTOR which
prevents their TSCs from going skewed from the hypervisor's
* tag 'x86_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Use TSC_FACTOR for Secure TSC frequency calculation
|
|
The OrangePi 4A is a typical Raspberry Pi model B sized development
board from Xunlong designed around an Allwinner T527 SoC.
The board has the following features:
- Allwinner T527 SoC
- AXP717B + AXP323 PMICs
- Up to 4GB LPDDR4 DRAM
- micro SD slot
- optional eMMC module
- M.2 slot for PCIe 2.0 x1
- 16 MB SPI-NOR flash
- 4x USB 2.0 type-A ports (one can be used in gadget mode)
- 1x Gigabit ethernet w/ Motorcomm PHY (through yet to be supported GMAC200)
- 3.5mm audio jack via internal audio codec
- HDMI 2.0 output
- eDP, MIPI CSI (2-lane and 4-lane) and MIPI DSI (4-lane) connectors
- USB type-C port purely for power
- AP6256 (Broadcom BCM4345) WiFi 5.0 + BT 5.0
- unsoldered headers for ADC and an additional USB 2.0 host port
- 40-pin GPIO header
Add a device tree for it, enabling all peripherals currently supported.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250628161608.3072968-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
UART1 is normally used to connect to the Bluetooth side of a Broadcom
WiFi+BT combo chip. The connection uses 4 pins.
Add pinmux nodes for UART1, one for the RX/TX pins, and one for the
RTS/CTS pins.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250628161608.3072968-5-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Nodes are supposed to be sorted by address, or if no addresses
apply, by node name. The rgmii0 pins are out of order, possibly
due to multiple patches adding pin mux settings conflicting.
Move the rgmii0 pins to the correct location.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250628161608.3072968-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
When the mmc nodes were added to the dtsi file, they were inserted in
the incorrect position.
Move them to the correct place.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250628161608.3072968-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fixes from Borislav Petkov:
- Do not remove the MCE sysfs hierarchy if thresholding sysfs nodes
init fails due to new/unknown banks present, which in itself is not
fatal anyway; add default names for new banks
- Make sure MCE polling settings are honored after CMCI storms
- Make sure MCE threshold limit is reset after the thresholding
interrupt has been serviced
- Clean up properly and disable CMCI banks on shutdown so that a
second/kexec-ed kernel can rediscover those banks again
* tag 'ras_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make sure CMCI banks are cleared during shutdown on Intel
x86/mce/amd: Fix threshold limit reset
x86/mce/amd: Add default names for MCA banks and blocks
x86/mce: Ensure user polling settings are honored when restarting timer
x86/mce: Don't remove sysfs if thresholding sysfs init fails
|
|
qemu-system-m68k -M q800 has an old bug that causes the kernel to
occasionally complain about a soft lockup:
watchdog: BUG: soft lockup - CPU#0 stuck for 5107s!
There isn't any actual lockup. The via1 clocksource produced a large
jump in jiffies, causing the watchdog to detect a stale timestamp.
The 32-bit clocksource counter runs at 783360 Hz and its period is
about 5482 seconds. Applying the "nanosecond" approximation used in
get_timestamp() in kernel/watchdog.c then yields the duration reported
in the log message above (always 5107 or 5108 in my tests):
0xffffffff / VIA_CLOCK_FREQ * 10**9 / 2**30 = 5106.209 seconds
It is notoriously difficult to correctly emulate a MOS6522 VIA chip. So
it seems wise to document the VIA clocksource driver better, especially
those hardware behaviours which the kernel relies upon.
Cc: Joshua Thompson <funaho@jurai.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/f7b4c02a1c8ed74ccceb5535d7e1e202deada8ce.1750739568.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
- Enable modular build of the SCTP network protocol (no longer
auto-enabled since now commit 6f8b4788266c7df3 ("dlm: drop SCTP
Kconfig dependency")),
- Enable modular build of OpenVPN data channel offload,
- Enable modular build of Btrfs and XFS filesystem support, and
Universal TUN/TAP device driver support (no longer auto-enabled
since commit 92f3c5a0051d2b56 ("lib/test_kmod: do not
hardcode/depend on any filesystem")),
- Enable modular build of Null crypto algorithms (no longer
auto-enabled since commit 0c08c72980ea8218 ("crypto: krb5enc - do
not select CRYPTO_NULL")),
- Drop CONFIG_CRYPTO_CHACHA20POLY1305=m (selected by OVPN),
- Enable modular build of the simple prime number generator for
testing (no longer auto-enabled since commit 3f2925174f8bd811
("lib/prime_numbers: KUnit test should not select PRIME_NUMBERS")),
- Enable the benchmark in the (modular) KUnit tests for CRC functions.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/365889e04f7289fdcb393911c18639486a0d3e73.1750102111.git.geert@linux-m68k.org
|
|
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize on
the __ASSEMBLER__ macro that is provided by the compilers now.
This is almost a completely mechanical patch (done with a simple
"sed -i" statement), with one comment tweaked manually in
arch/m68k/include/asm/mac_baboon.h (which was missing underscores).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20250611114056.118309-3-thuth@redhat.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
__ASSEMBLY__ is only defined by the Makefile of the kernel, so
this is not really useful for uapi headers (unless the userspace
Makefile defines it, too). Let's switch to __ASSEMBLER__ which
gets set automatically by the compiler when compiling assembly
code.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20250611114056.118309-2-thuth@redhat.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Allow the experimental dead code elimination config to be enabled.
For my 68000 nommu config this frees up a few hundred K of memory
so seems worth while.
Boot and build tested on nommu and mmu enabled configs.
Before:
Memory: 5388K/8192K available (1986K kernel code, 114K rwdata,
244K rodata, 92K init, 41K bss, 2624K reserved, 0K cma-reserved)
After
Memory: 5684K/8192K available (1714K kernel code, 112K rwdata,
228K rodata, 92K init, 37K bss, 2328K reserved, 0K cma-reserved)
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20250416114240.2929832-1-daniel@0x0f.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
When MACH_IS_MVME147, the boot console calls mvme147_scc_write() to
generate console output. That will continue to work even after
debug_cons_nputs() becomes unavailable so there's no need to
unregister the boot console.
Take the opportunity to remove a repeated MACH_IS_* test. Use the
actual .write method (instead of a wrapper) and test that pointer
instead. This means adding an unused parameter to debug_cons_nputs() for
consistency with the struct console API.
early_printk.c is only built when CONFIG_EARLY_PRINTK=y. As of late,
head.S is only built when CONFIG_MMU_MOTOROLA=y. So let the former symbol
depend on the latter, to obviate some ifdef conditionals.
Cc: Daniel Palmer <daniel@0x0f.com>
Fixes: 077b33b9e283 ("m68k: mvme147: Reinstate early console")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/d1d4328e5aa9a87bd8352529ce62b767731c0530.1743467205.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The cursor home operation is unused and seems undesirable for logging.
Remove it. The console_not_cr label actually means "not line feed and
not carriage return either" so take the opportunity to replace it with
something less confusing. Rectify some inconsistent whitespace while
we're here.
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Tested-by: Stan Johnson <userm57@yahoo.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/ec2d443d3c3213028bbbab7c2e0382cd53db75fe.1743115195.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The recursive call to console_putc to effect a carriage return is
needlessly slow and complicated. Instead, just clear the column counter
directly. Setup %a0 earlier to avoid a repeated comparison.
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Tested-by: Stan Johnson <userm57@yahoo.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/a6104f41918bed4fd17f92c45df94ac7a5d30e40.1743115195.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Move the cursor position rightward after rendering the character,
not before. This avoids complications that arise when the recursive
console_putc call has to wrap the line and/or scroll the display.
This also fixes the linewrap bug that crops off the rightmost column.
When the cursor is at the bottom of the display, a linefeed will not
move the cursor position further downward. Instead, the display scrolls
upward. Avoid the repeated add/subtract sequence by way of a single
subtraction at the initialization of console_struct_num_rows.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Tested-by: Stan Johnson <userm57@yahoo.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/9d4e8c68a456d5f2bc254ac6f87a472d066ebd5e.1743115195.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The device is available in multiple variants with differing RAM
capacities. The memory range defined in the 0x80000000 bank exceeds the
address range of the memory controller, which eventually leads to ARM
SError crashes. Reduce the bank size to a value which is available to
all devices.
The bootloader must be responsible for identifying the RAM capacity and
editing the memory node accordingly.
Fixes: d6f3a7f91fdb ("arm64: dts: exynos: add initial devicetree support for exynos7870")
Cc: stable@vger.kernel.org # v6.16
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250626-exynos7870-dts-fixes-v1-3-349987874d9a@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The device is available in multiple variants with differing RAM
capacities. The memory range defined in the 0x80000000 bank exceeds the
address range of the memory controller, which eventually leads to ARM
SError crashes. Reduce the bank size to a value which is available to
all devices.
The bootloader must be responsible for identifying the RAM capacity and
editing the memory node accordingly.
Fixes: d6f3a7f91fdb ("arm64: dts: exynos: add initial devicetree support for exynos7870")
Cc: stable@vger.kernel.org # v6.16
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250626-exynos7870-dts-fixes-v1-2-349987874d9a@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
In gadget mode, USB connections are sluggish. The device won't send
packets to the host unless the host sends packets to the device. For
instance, SSH-ing through the USB network would apparently not work
unless you're flood-pinging the device's IP.
Add the property snps,usb2-gadget-lpm-disable to the dwc3 node, which
seems to solve this issue.
Fixes: d6f3a7f91fdb ("arm64: dts: exynos: add initial devicetree support for exynos7870")
Cc: stable@vger.kernel.org # v6.16
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250626-exynos7870-dts-fixes-v1-1-349987874d9a@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Describe the cache memories according with datasheet chapter 15.2:
- L1 cache configuration with 32KB for both data and instruction cache.
- L2 cache configuration with 256KB unified cache.
Before this patch the kernel reported the warning:
[ 0.171425] cacheinfo: Unable to detect cache hierarchy for CPU 0
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250619070636.8844-3-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Describe the cache memories according with datasheet chapter 15.2:
- L1 cache configuration with 32KB for both data and instruction cache.
- L2 cache configuration with 256KB unified cache.
Before this patch the kernel reported the warning:
[ 0.161955] cacheinfo: Unable to detect cache hierarchy for CPU 0
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250619070636.8844-2-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add the memory size properties for L1 and L2 according with block
diagram from datasheet:
- L1 cache configuration with 32 KB for both data and instruction cache.
- L2 cache configuration with 128 KB unified cache.
[root@sama5d4 ~]$ lscpu
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 1
On-line CPU(s) list: 0
Vendor ID: ARM
Model name: Cortex-A5
Caches (sum of all):
L1d: 32 KiB (1 instance)
L1i: 32 KiB (1 instance)
L2: 128 KiB (1 instance)
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250625064934.4828-4-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add the memory size properties for L1 according with block
diagram from datasheet:
- L1 cache configuration with 32 KB for both data and instruction cache.
[root@sama5d3 ~]$ lscpu
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 1
On-line CPU(s) list: 0
Vendor ID: ARM
Model name: Cortex-A5
Caches (sum of all):
L1d: 32 KiB (1 instance)
L1i: 32 KiB (1 instance)
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250625064934.4828-3-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add the memory size properties for L1 and L2 according with block
diagram from datasheet:
- L1 cache configuration with 32 KB for both data and instruction cache.
- L2 cache configuration with 128 KB unified cache.
[root@sama5d2 ~]$ lscpu
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 1
On-line CPU(s) list: 0
Vendor ID: ARM
Model name: Cortex-A5
Caches (sum of all):
L1d: 32 KiB (1 instance)
L1i: 32 KiB (1 instance)
L2: 128 KiB (1 instance)
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250625064934.4828-2-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
