| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The touchscreen isn't enabled by bootloader and doesn't need to be
enabled at boot, only when the driver probes, thus remove the
regulator-boot-on property.
Fixes: 288ef8a42612 ("arm64: dts: sdm845: add oneplus6/6t devices")
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-dts-oneplus-regulators-v2-1-3e67cea1e4e7@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
If the OS does not support recovering the state left by the
bootloader it needs a way to reset display hardware, so that it can
start from a clean state. Add a reference to the relevant reset.
It fixes display init issue appeared in Linux v6.17: without reset
device boots into black screen and you need to turn display off/on
to "fix" it. Also sometimes it can boot into solid blue color
with these messages in kernel log:
hw recovery is not complete for ctl:2
[drm:dpu_encoder_phys_vid_prepare_for_kickoff:569] [dpu error]enc33
intf1 ctl 2 reset failure: -22
[drm:dpu_encoder_frame_done_timeout:2727] [dpu error]enc33 frame
done timeout
Fixes: 0e789b491ba0 ("pmdomain: core: Leave powered-on genpds on until sync_state")
Cc: stable@vger.kernel.org # 6.17
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251116-sdm660-mdss-reset-v2-3-6219bec0a97f@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Remove qcom,tsens-v1 as fallback compatible since this IP has no RPM
and, as such, must use its own init routine available in the driver.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20250818-ipq5018-tsens-fix-v1-2-0f08cf09182d@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Arduino UnoQ is a single-board computer combining Qualcomm
Dragonwing™ QRB2210 microprocessor with STMicroelectronics STM32U585
microcontroller.
Support to a simply boot to shell environment includes:
- UART, I2C, SPI
- onboard LEDS
- eMMC
- WLAN and BT
Signed-off-by: Riccardo Mereu <r.mereu@arduino.cc>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20251120155825.121483-7-r.mereu.kernel@arduino.cc
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
uart2 is used in Arduino UnoQ as an interface between microprocessor and
microcontroller.
Signed-off-by: Riccardo Mereu <r.mereu@arduino.cc>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251120155825.121483-6-r.mereu.kernel@arduino.cc
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add DTS for Thundercomm qcs6490-rubikpi3 board which uses
QCS6490 SoC.
Works:
- Bluetooth (AP6256)
- Wi-Fi (AP6256)
- Ethernet (AX88179B connected to UPD720201)
- Two USB Type-A 3.0 ports (UPD720201 connected to PCIe0)
- USB Type-A 2.0 port
- USB Type-C
- M.2 M-Key 2280 PCIe 3.0
- FAN
- RTC
- 40PIN: I2C x1, UART x1
Signed-off-by: Hongyang Zhao <hongyang.zhao@thundersoft.com>
Reviewed-by: Roger Shimizu <rosh@debian.org>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251126-rubikpi-next-20251125-v7-2-e46095b80529@thundersoft.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable OTG support for primary USB controller on EVK Platform. Add
HD3SS3220 Type-C port controller present between Type-C port and SoC
that provides role switch notifications to controller.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251128102507.3206169-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable SD Card host controller for sm8750 qrd board.
Signed-off-by: Sarthak Garg <sarthak.garg@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251202081017.2234677-4-sarthak.garg@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable SD Card host controller for sm8750 mtp board.
Signed-off-by: Sarthak Garg <sarthak.garg@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251202081017.2234677-3-sarthak.garg@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add SD Card host controller for sm8750 soc.
Signed-off-by: Sarthak Garg <sarthak.garg@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251202081017.2234677-2-sarthak.garg@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable AMC6821 fan controller for monaco-evk platform and
configure pwm polarity as inverted.
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251204041158.2613340-1-gaurav.kohli@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
We know these devices are present, most of them are supported by
downstream and close to the mainline kernels.
This is very handy when rebasing the integration tree with the support.
No functional changes.
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Robert Eckelmann <longnoserob@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251205-slpi-v3-3-a1320a074345@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Firmware patht adjusted to include device maker "Xiaomi"
Signed-off-by: Robert Eckelmann <longnoserob@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251205-slpi-v3-2-a1320a074345@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the SLPI dsp on the Xiaomi Pocophone F1 with Qualcom SDM845 SoC.
Signed-off-by: Robert Eckelmann <longnoserob@gmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251205-slpi-v3-1-a1320a074345@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Introduce the framebuffer node, mostly useful for the u-boot and early
boot stages.
Signed-off-by: Sam Day <me@samcday.com>
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251206-sdm845-oneplus-fb-v1-2-19b666b27d6e@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Sort the nodes by alphabet, no functional changes.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251206-sdm845-oneplus-fb-v1-1-19b666b27d6e@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the drivers for Embedded Controllers present on laptops with
Qualcomm SoCs: Acer Aspire 1, Huawei Matebook E Go, Lenovo Yoga C630 and
Lenovo Thinkpad T14s.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251119082408.49712-2-krzk@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Many years have passed (more than 9 actually) since the introduction of
the Nexus 5 dts to Linux and it's high time to update the model property
to be a proper model name and thereby bringing it to the standards of
the 2020s.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20251208-msm8974-hammerhead-model-v1-1-88975f30cbaa@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
driver to load successfully
The ipa driver refuses to load with the old ipa_fw_mem in newer kernels.
Shrinking its size to 0x5a000 fixes the problem.
Fixes: aab69794b55d ("arm64: dts: qcom: Add support for Huawei MateBook E 2019")
Signed-off-by: Jingzhou Zhu <newwheatzjz@zohomail.com>
Link: https://lore.kernel.org/r/20251208031511.3284-3-newwheatzjz@zohomail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
reserved-memroy nodes
The adsp_mem and slpi_mem defined in sdm845.dtsi work well. Remove these
nodes here to avoid redefinition.
Signed-off-by: Jingzhou Zhu <newwheatzjz@zohomail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251208031511.3284-2-newwheatzjz@zohomail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
WLAN card is connected to PCIe4 on Hamoa IoT EVK board. Add WLAN node
to support power sequence for this WLAN card.
Signed-off-by: Yingying Tang <yingying.tang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251210032817.1264850-1-yingying.tang@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable ST33HTPM TPM over SPI10 on the Monaco IoT EVK by adding the
required SPI and TPM nodes.
Signed-off-by: Khalid Faisal Ansari <khalid.ansari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251114-enable-tpm-monaco-v1-1-4ed566838698@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable ST33HTPM TPM over SPI16 on the LeMans IoT EVK by adding the
required SPI and TPM nodes.
Signed-off-by: Khalid Faisal Ansari <khalid.ansari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251114-enable-tpm-lemans-v1-1-c8d8b580ace7@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add cooling-cells property to the CPU nodes to support cpufreq
cooling devices.
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251215045451.3150894-1-gaurav.kohli@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add cooling-cells property to the CPU nodes to support cpufreq
cooling devices.
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251208114558.2343462-1-gaurav.kohli@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This adds initial device tree support for the following phones:
- Google Pixel 3 (blueline)
- Google Pixel 3 XL (crosshatch)
Both phone boards use the same identifiers and differ only slightly
in their connected peripherals.
Supported functionality includes:
- Debug UART
- UFS
- USB-C (peripheral mode)
- Framebuffer (both u-boot and Linux)
- Display (Pixel 3 only, and the driver needs work)
- GPU
- Bluetooth
- Wi-Fi
The rmtfs region is allocated using UIO, making it technically "dynamic."
Its address and size can be read from sysfs:
$ cat /sys/class/uio/uio0/name
/sys/class/uio/uio0/maps/map0/addr
0x00000000f2701000
$ cat /sys/class/uio/uio0/maps/map0/size
0x0000000000200000
Like the OnePlus 6, the Pixel 3 requires 1 kB of reserved memory on either
side of the rmtfs region to work around an XPU bug that would otherwise
cause erroneous violations when accessing the rmtfs_mem region.
Co-developed-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Casey Connolly <casey@connolly.tech>
Signed-off-by: Casey Connolly <casey@connolly.tech>
Co-developed-by: Joel Selvaraj <foss@joelselvaraj.com>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Co-developed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Co-developed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20251214-pixel-3-v7-8-b1c0cf6f224d@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The DT file has GPU node enabled, but doesn't specify the file name of
the ZAP firmware, which means using a default file name. Specify the
name to the ZAP shader firmware, pointing to the file in the
linux-firmware repo.
Fixes: 04a3605b184e ("arm64: dts: qcom: add sm8250 GPU nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251213-zap-names-v1-2-c889af173911@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The DT file has GPU node enabled, but doesn't specify the file name of
the ZAP firmware, which means using a default file name. Specify the
name to the ZAP shader firmware, pointing to the file in the
linux-firmware repo.
Fixes: f30ac26def18 ("arm64: dts: qcom: add sm8150 GPU nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251213-zap-names-v1-1-c889af173911@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Historically sdm630.dtsi has used 1 byte length for the gpu_speed_bin
cell, although it spans two bytes (offset 5, size 7 bits). It was being
accepted by the kernel because before the commit 7a06ef751077 ("nvmem:
core: fix bit offsets of more than one byte") the kernel didn't have
length check. After this commit nvmem core rejects QFPROM on sdm630 /
sdm660, making GPU and USB unusable on those platforms.
Set the size of the gpu_speed_bin cell to 2 bytes, fixing the parsing
error. While we are at it, update the length to 8 bits as pointed out by
Alexey Minnekhanov.
Fixes: b190fb010664 ("arm64: dts: qcom: sdm630: Add sdm630 dts file")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Link: https://lore.kernel.org/r/20251211-sdm630-fix-gpu-v2-1-92f0e736dba0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SDM845-based SHIFTPHONES SHIFT6mq has its own calibration files
for the WCN3990 WiFi/Bluetooth radio with the ath10k driver.
Add the calibration variant name to the DTS to reflect this to
allow using the calibration files from linux-firmware.
[David] Adjust the compatible as ath10k-calibration-variant is deprecated
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251110-sdm845-calibration-variants-v1-3-2c536ada77c2@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SDM845-based Xiaomi POCOPHONE F1 has its own calibration files
for the WCN3990 WiFi/Bluetooth radio with the ath10k driver.
Add the calibration variant name to the DTS to reflect this to
allow using the calibration files from linux-firmware.
[David] Adjust the compatible as ath10k-calibration-variant is deprecated
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251110-sdm845-calibration-variants-v1-2-2c536ada77c2@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SDM845-based Oneplus 6 and 6T have their own calibration files
for the WCN3990 WiFi/Bluetooth radio with the ath10k driver.
Add the calibration variant name to the DTS to reflect this to
allow using the calibration files from linux-firmware.
[David] Adjust the compatible as ath10k-calibration-variant is deprecated
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20251110-sdm845-calibration-variants-v1-1-2c536ada77c2@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable vreg_l6p, which is the voltage source for the pull-up resistor of
the CCI busses.
This ensures that I2C communication works as expected.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251210-fp4-cam-prep-v1-4-0eacbff271ec@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add multiple fixed regulators that are found on the phone, which provide
power to the cameras.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Link: https://lore.kernel.org/r/20251210-fp4-cam-prep-v1-3-0eacbff271ec@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add notes for the EEPROMs found on the main rear camera, ultra-wide rear
camera and front camera. Also add some comments that act as placeholders
for other nodes that will be added in the future, for the camera sensors
and some VCM drivers.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251210-fp4-cam-prep-v1-2-0eacbff271ec@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the cpucp mailbox, sram and SCMI nodes required to enable
the CPUFreq support using the SCMI perf protocol on SM8750 SoCs.
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251211-sm8750-cpufreq-v1-2-394609e8d624@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This device uses ANPEC APX9131 hall sensor. It is a basic GPIO hall
sensor for which a generic "gpio-keys" device tree node configuration
suffices.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Link: https://lore.kernel.org/r/20251208-b4-battery-hall-v3-2-84e2157705a4@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This device tracks remaining battery capacity percentage using voltage
mode BMS. This commit enables the pm8916_bms node and adds a battery
node to track its capacity. Battery properties were taken from the
information printed on the battery itself and downstream device tree
for a battery named "nvt+atl_3000mah" [1]
[1] https://github.com/Asus-MSM8916/android_kernel_asus_msm8916/blob/10.x/arch/arm/boot/dts/qcom/ASUS_ZE550KL_1936167_3000mAh_3p4COV_VBMS_Final.dtsi
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251208-b4-battery-hall-v3-1-84e2157705a4@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the pinctrl, clock and interconnect drivers for the Qualcomm
Milos SoC. This is required for booting The Fairphone (Gen. 6).
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251219-milos-defconfig-v1-1-f58012ac8ef6@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add necessary DAI links and DAI name prefixes to enable audio playback
over USB/DisplayPort and HDMI. The HDMI port is not yet enabled, but it
should carry respective DAI name prefix regardless.
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251217120051.98198-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Sound DAI devices exposing same set of mixers, e.g. each DisplayPort
controller, need to add dedicated prefix for these mixers to avoid
conflicts and to allow ALSA to properly configure given instance.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251217120051.98198-3-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable IRIS to allow using the hardware-accelerated video codecs. The
firmware is not upstream in linux-firmware yet, so users need to copy it
from Windows to qcom/x1e80100/ASUSTeK/vivobook-s15/qcvss8380.mbn (just like
GPU/ADSP/CDSP firmware).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Link: https://lore.kernel.org/r/20251220-asus_usbc_dp-v3-3-5e244d420d0f@hotmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the HDMI port on left side of the laptop.
The display signal is routed through a simple Displayport to HDMI
bridge.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251220-asus_usbc_dp-v3-2-5e244d420d0f@hotmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Asus vivobook s15 has two usb type c ports on the left side, these
use parade ps8830 retimers like the others, enable them to also enable
dp altmode
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251220-asus_usbc_dp-v3-1-5e244d420d0f@hotmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Samsung S5K3M5 image sensor supports only 4-lane MIPI CSI-2 interface,
which makes the sensor data-lanes property redundant, and it can be
safely removed from the board dts file. Noteworthy that the property
value is incorrect, because conventionally lanes enumeration of image
sensors starts from index 1.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251222023834.3284370-5-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
At first voltage supply properties of Samsung S5K3M5 image sensor got
names following a pad name convention for Omnivision image sensors. Now
the property names were corrected in the sensor dt bindings documentation,
and it should be updated in the SM8550-HDK with the Rear Camera Card
board dts file.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251222023834.3284370-4-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Samsung S5K3M5 image sensor supports only 4-lane MIPI CSI-2 interface,
which makes the sensor data-lanes property redundant, and it can be
safely removed from the board dts file. Noteworthy that the property
value is incorrect, because conventionally lanes enumeration of image
sensors starts from index 1.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251222023834.3284370-3-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
At first voltage supply properties of Samsung S5K3M5 image sensor got
names following a pad name convention for Omnivision image sensors. Now
the property names were corrected in the sensor dt bindings documentation,
and it should be updated in the SM8550-QRD board dts file.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251222023834.3284370-2-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable DPTX0 along with their corresponding PHYs for
qcs8300-ride platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251117-dts_qcs8300-v7-2-bf42d39e7828@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
and eDP PHY
Add devicetree changes to enable MDSS display-subsystem,
display-controller(DPU), DisplayPort controller and eDP PHY for
Qualcomm QCS8300 platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251117-dts_qcs8300-v7-1-bf42d39e7828@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
