summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2010-05-21powerpc: Avoid bad relocations in iSeries codePaul Mackerras1-2/+2
Subrata Modak reported that building a CONFIG_RELOCATABLE kernel with CONFIG_ISERIES enabled gives the following warnings: WARNING: 4 bad relocations c00000000007216e R_PPC64_ADDR16_HIGHEST __ksymtab+0x00000000009dcec8 c000000000072172 R_PPC64_ADDR16_HIGHER __ksymtab+0x00000000009dcec8 c00000000007217a R_PPC64_ADDR16_HI __ksymtab+0x00000000009dcec8 c00000000007217e R_PPC64_ADDR16_LO __ksymtab+0x00000000009dcec8 The reason is that decrementer_iSeries_masked is using LOAD_REG_IMMEDIATE to get the address of a kernel symbol, which creates relocations that aren't handled by the kernel relocator code. Instead of reading the tb_ticks_per_jiffy variable, we can just set the decrementer to its maximum value (0x7fffffff) and that will work just as well. In fact timer_interrupt sets the decrementer to that value initially anyway, and we are sure to get into timer_interrupt once interrupts are reenabled because we store 1 to the decrementer interrupt flag in the lppaca (LPPACADECRINT(r12) here). Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-21powerpc: Use common cpu_die (fixes SMP+SUSPEND build)Milton Miller5-11/+19
Configuring a powerpc 32 bit kernel for both SMP and SUSPEND turns on CPU_HOTPLUG to enable disable_nonboot_cpus to be called by the common suspend code. Previously the definition of cpu_die for ppc32 was in the powermac platform code, causing it to be undefined if that platform as not selected. arch/powerpc/kernel/built-in.o: In function 'cpu_idle': arch/powerpc/kernel/idle.c:98: undefined reference to 'cpu_die' Move the code from setup_64 to smp.c and rename the power mac versions to their specific names. Note that this does not setup the cpu_die pointers in either smp_ops (request a given cpu die) or ppc_md (make this cpu die), for other platforms but there are generic versions in smp.c. Reported-by: Matt Sealey <matt@genesi-usa.com> Reported-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-21powerpc: Fix string library functionsAndreas Schwab1-8/+8
The powerpc strncmp implementation does not correctly handle a zero length, despite the claim in 0119536cd314ef95553604208c25bc35581f7f0a (Add hand-coded assembly strcmp). Additionally, all the length arguments are size_t, not int, so use PPC_LCMPI and eq instead of cmpwi and le throughout. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-21powerpc/rtasd: Don't start event scan if scan rate is zeroMichael Ellerman1-0/+6
There appear to be Pegasos systems which have the rtas-event-scan RTAS tokens, but on which the event scan always fails. They also have an event-scan-rate property containing 0, which means call event scan 0 times per minute. So interpret a scan rate of 0 to mean don't scan at all. This fixes the problem on the Pegasos machines and makes sense as well. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-17powerpc/fsl-booke: Move loadcam_entry back to asm code to fix SMP ftraceKumar Gala4-23/+48
When we build with ftrace enabled its possible that loadcam_entry would have used the stack pointer (even though the code doesn't need it). We call loadcam_entry in __secondary_start before the stack is setup. To ensure that loadcam_entry doesn't use the stack pointer the easiest solution is to just have it in asm code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-17powerpc/fsl-booke: Fix InstructionTLBError execute permission checkLi Yang1-3/+10
In CONFIG_PTE_64BIT the PTE format has unique permission bits for user and supervisor execute. However on !CONFIG_PTE_64BIT we overload the supervisor bit to imply user execute with _PAGE_USER set. This allows us to use the same permission check mask for user or supervisor code on !CONFIG_PTE_64BIT. However, on CONFIG_PTE_64BIT we map _PAGE_EXEC to _PAGE_BAP_UX so we need a different permission mask based on the fault coming from a kernel address or user space. Without unique permission masks we see issues like the following with modules: Unable to handle kernel paging request for instruction fetch Faulting instruction address: 0xf938d040 Oops: Kernel access of bad area, sig: 11 [#1] Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-17powerpc/8610: add probing for individual DMA channels, not just DMA controllersTimur Tabi1-1/+2
A future version of the MPC8610 HPCD's ASoC DMA driver will probe on individual DMA channel nodes, so the DMA controller nodes' compatible string must be listed in mpc8610_ids[] for the probe to work. Also remove the "gianfar" compatible from mpc8610_ids[], since there is no gianfar (or any other networking device) on the 8610. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-17powerpc/83xx: Add MCU LEDs support for MPC837xRDB and MPC8315RDB boardsAnton Vorontsov6-0/+58
There are two front-panel LEDs on MPC837xRDB and MPC8315RDB boards: PWR and HDD. After adding appropriate nodes we can program these LEDs from kernel and user space. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-17powerpc/85xx: Fix P1020RDB boot hang due USB2Anton Vorontsov1-0/+6
Since USB2 is shared with local bus, either local bus or USB2 should be disabled. By default U-Boot enables local bus, so we have to disable USB2, otherwise kernel hangs: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 28, io base 0xffe22000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2 <hangs here> Note that U-Boot doesn't clear 'status' property when it enables USB2, so we have to comment out the whole node. To enable USB2, one can issue 'setenv hwconfig usb2:dr_mode=<host|peripheral>' command at the U-Boot prompt. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-17powerpc/85xx: Add eTSEC 2.0 support for P1020RDB boardsAnton Vorontsov1-0/+119
This patch adds support for eTSEC 2.0 as found in P1020. The changes include introduction of the group nodes for the etsec nodes. Signed-off-by: Sandeep Gopalpet <sandeep.kumar@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-17powerpc: remove tls_ssl_stream descriptor type capability in sec3.3 nodeKim Phillips1-1/+1
Technically, whilst SEC v3.3 h/w honours the tls_ssl_stream descriptor type, it lacks the ARC4 algorithm execution unit required to be able to execute anything meaningful with it. Change the node to agree with the documentation that declares that the sec3.3 really doesn't have such a descriptor type. Reported-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-17powerpc: Add interrupt support to mpc8xxx_gpioPeter Korsgaard1-0/+147
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-07Merge commit 'origin/master' into nextBenjamin Herrenschmidt301-2533/+4869
2010-05-06powerpc/cpumask: Add DEBUG_PER_CPU_MAPS optionAnton Blanchard1-0/+12
Enable the DEBUG_PER_CPU_MAPS option so we can look for problems with cpumasks . Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert mpic driver to new cpumask APIBenjamin Herrenschmidt2-36/+39
Convert to the new cpumask API. irq_choose_cpu can be simplified by using cpumask_next and cpumask_first. smp_mpic_message_pass was doing open coded cpumask manipulation and passing an int for a cpumask into mpic_send_ipi. Since mpic_send_ipi is only used locally, make it static and convert it to take a cpumask. This allows us to clean up the mess in smp_mpic_message_pass. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Update some commentsAnton Blanchard5-9/+9
Since the *_map cpumask variants are deprecated, change the comments to instead refer to *_mask. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert NUMA code to new cpumask APIAnton Blanchard3-15/+47
Convert NUMA code to new cpumask API. We shift the node to cpumask setup code until after we complete bootmem allocation so we can dynamically allocate the cpumasks. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert hotplug-cpu code to new cpumask APIAnton Blanchard1-14/+19
Convert hotplug-cpu code to new cpumask API. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Dynamically allocate cpu_sibling_map and cpu_core_map cpumasksAnton Blanchard4-24/+40
Dynamically allocate cpu_sibling_map and cpu_core_map cpumasks. We don't need to set_cpu_online() the boot cpu in smp_prepare_boot_cpu, init/main.c does it for us. We also postpone setting of the boot cpu in cpu_sibling_map and cpu_core_map until when the memory allocator is available (smp_prepare_cpus), similar to x86. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert /proc/cpuinfo to new cpumask APIAnton Blanchard1-9/+13
Use new cpumask API in /proc/cpuinfo code. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Refactor /proc/cpuinfo codeAnton Blanchard1-29/+33
This separates the per cpu output from the summary output at the end of the file, making it easier to convert to the new cpumask API in a subsequent patch. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert xics driver to new cpumask APIAnton Blanchard1-17/+21
Use the new cpumask API and add some comments to clarify how get_irq_server works. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert pseries SMP code to new cpumask APIAnton Blanchard1-7/+9
Use new cpumask functions in pseries SMP startup code. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert iseries SMP code to new cpumask APIAnton Blanchard1-1/+1
Use new cpumask functions in iseries SMP startup code. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert fixup_irqs to new cpumask APIAnton Blanchard3-10/+13
Use new cpumask_* functions, and dynamically allocate cpumask in fixup_irqs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert smp_cpus_done to new cpumask APIAnton Blanchard1-3/+6
Use the new cpumask_* functions and dynamically allocate the cpumask in smp_cpus_done. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert rtasd to new cpumask APIAnton Blanchard1-5/+5
Use cpumask_first, cpumask_next in rtasd code. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Use cpu_online_maskAnton Blanchard2-2/+2
Change &cpu_online_map to cpu_online_mask. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc: Invoke oom-killer from page faultBenjamin Herrenschmidt1-10/+4
As explained in commit 1c0fe6e3bd, we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Cc: linuxppc-dev@ozlabs.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/mm: Track backing pages allocated by vmemmap_populate()Mark Nelson2-0/+49
We need to keep track of the backing pages that get allocated by vmemmap_populate() so that when we use kdump, the dump-capture kernel knows where these pages are. We use a simple linked list of structures that contain the physical address of the backing page and corresponding virtual address to track the backing pages. To save space, we just use a pointer to the next struct vmemmap_backing. We can also do this because we never remove nodes. We call the pointer "list" to be compatible with changes made to the crash utility. vmemmap_populate() is called either at boot-time or on a memory hotplug operation. We don't have to worry about the boot-time calls because they will be inherently single-threaded, and for a memory hotplug operation vmemmap_populate() is called through: sparse_add_one_section() | V kmalloc_section_memmap() | V sparse_mem_map_populate() | V vmemmap_populate() and in sparse_add_one_section() we're protected by pgdat_resize_lock(). So, we don't need a spinlock to protect the vmemmap_list. We allocate space for the vmemmap_backing structs by allocating whole pages in vmemmap_list_alloc() and then handing out chunks of this to vmemmap_list_populate(). This means that we waste at most just under one page, but this keeps the code is simple. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc: Correct parport interrupt parsingMartyn Welch1-3/+8
Currently the parsing of the device tree in arch/powerpc/include/asm/parport.h assumes that the interrupt provided in the parallel port node is a valid virtual irq. The values for the interrupts provided in the device tree should have meaning in the context of the driver for the specific interrupt controller to which the interrupt is connected and irq_of_parse_and_map() should be used to determine the correct virtual irq. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc: Fix CONFIG_DEBUG_PAGEALLOC on 603/e300Benjamin Herrenschmidt1-4/+0
So we tried to speed things up a bit using flush_hash_pages() directly but that falls over on 603 of course meaning we fail to flush the TLB properly and we may even end up having it corrupt memory randomly by accessing a hash table that doesn't exist. This removes the "optimization" by always going through flush_tlb_page() for now at least. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/pseries: Only call start-cpu when a CPU is stoppedMichael Neuling1-0/+6
Currently we always call start-cpu irrespective of if the CPU is stopped or not. Unfortunatley on POWER7, firmware seems to not like start-cpu being called when a cpu already been started. This was not the case on POWER6 and earlier. This patch checks to see if the CPU is stopped or not via an query-cpu-stopped-state call, and only calls start-cpu on CPUs which are stopped. This fixes a bug with kexec on POWER7 on PHYP where only the primary thread would make it to the second kernel. Reported-by: Ankita Garg <ankita@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/pseries: Make query_cpu_stopped callable outside hotplug cpuMichael Neuling3-26/+34
This moves query_cpu_stopped() out of the hotplug cpu code and into smp.c so it can called in other places and renames it to smp_query_cpu_stopped(). It also cleans up the return values by adding some #defines Cc: <stable@kernel.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-05powerpc/4xx: Add optional "reset_type" property to control reboot via dtsStefan Roese1-2/+22
By setting "reset_type" to one of the following values, the default software reset mechanism may be overidden. Here the possible values of "reset_type": 1 - PPC4xx core reset 2 - PPC4xx chip reset 3 - PPC4xx system reset (default) This will be used by a new PPC440SPe board port, which needs a "chip reset" instead of the default "system reset" to be asserted. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05powerpc/47x: defconfig for 476 on the iss 4xx simulatorDave Kleikamp1-0/+1026
A defconfig for the IBM ISS 476 simulator Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05powerpc/4xx: Simple platform for the ISS 4xx simulatorTorez Smith11-1/+533
This is a trivial 4xx plaform that uses the new simple bsp from Josh and is handy to use in simulators such as ISS or even Mambo who don't properly implement most of the actual devices in the SoC but really only the core. Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05powerpc/476: Add isync after loading mmu and debug spr'sDave Kleikamp2-0/+6
476 requires an isync after loading MMU and debug related SPR's. Some of these are in performance-critical paths and may need to be optimized, but initially, we're playing it safe. Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05powerpc/476: add machine check handler for 47x coreDave Kleikamp3-0/+42
The 47x core's MCSR varies from 44x, so it needs it's own machine check handler. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05powerpc/47x: Base ppc476 supportDave Kleikamp17-44/+871
This patch adds the base support for the 476 processor. The code was primarily written by Ben Herrenschmidt and Torez Smith, but I've been maintaining it for a while. The goal is to have a single binary that will run on 44x and 47x, but we still have some details to work out. The biggest is that the L1 cache line size differs on the two platforms, but it's currently a compile-time option. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05powerpc/44x: break out cpu init code into stand-alone functionDave Kleikamp1-159/+171
The 47x platform supports multiple cores and shares code with 44x. Break out code that is common for initializing the primary and secondary cpus into a function which can be called for both. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05powerpc/booke: Add Stack Marking support to Booke Exception PrologTorez Smith1-0/+4
This patch adds a marker to the exception stack frame to aid in debugging. It's already inserted on other platforms and xmon recognizes it and identifies exception frames when showing stack traces. Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds5-1/+22
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip: powernow-k8: Fix frequency reporting x86: Fix parse_reservetop() build failure on certain configs x86: Fix NULL pointer access in irq_force_complete_move() for Xen guests x86: Fix 'reservetop=' functionality
2010-05-05Fix the x86_64 implementation of call_rwsem_wait()David Howells1-1/+1
The x86_64 call_rwsem_wait() treats the active state counter part of the R/W semaphore state as being 16-bit when it's actually 32-bit (it's half of the 64-bit state). It should do "decl %edx" not "decw %dx". Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-03powernow-k8: Fix frequency reportingMark Langsdorf1-1/+2
With F10, model 10, all valid frequencies are in the ACPI _PST table. Cc: <stable@kernel.org> # 33.x 32.x Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> LKML-Reference: <1270065406-1814-6-git-send-email-bp@amd64.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-03x86: Fix parse_reservetop() build failure on certain configsIngo Molnar1-0/+1
Commit e67a807 ("x86: Fix 'reservetop=' functionality") added a fixup_early_ioremap() call to parse_reservetop() and declared it in io.h. But asm/io.h was only included indirectly - and on some configs not at all, causing a build failure on those configs. Cc: Liang Li <liang.li@windriver.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Wang Chen <wangchen@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <1272621711-8683-1-git-send-email-liang.li@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-01x86: Fix NULL pointer access in irq_force_complete_move() for Xen guestsPrarit Bhargava1-0/+3
Upstream PV guests fail to boot because of a NULL pointer in irq_force_complete_move(). It is possible that xen guests have irq_desc->chip_data = NULL. Test for NULL chip_data pointer before attempting to complete an irq move. Signed-off-by: Prarit Bhargava <prarit@redhat.com> LKML-Reference: <20100427152434.16193.49104.sendpatchset@prarit.bos.redhat.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org> [2.6.33]
2010-05-01Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds23-176/+570
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (27 commits) MIPS: Loongson 2F: Fix of problems introduced by -mfix-loongson2f-jump MIPS: Loongson-2F: Use CONFIG_CPU_JUMP_WORKAROUNDS to control workarounds. MIPS: Loongson 2F: Enable fixups of the latest binutils MIPS: Loongson: Add CPU_LOONGSON2F_WORKAROUNDS MIPS: Kconfig: Make Broadcom SoC support naming consistent MIPS: BCM63xx: Update defconfig MIPS: oprofile: Fix breakage when CONFIG_OPROFILE=m STAGING: octeon-ethernet: Use proper phy addresses for Movidis hardware. NET: mdio-octeon: Enable the hardware before using it. I2C: Fix section mismatch errors in i2c-octeon.c MIPS: Loongson: Fix LOONGSON_ADDRWIN_CFG macro. MIPS: Loongson: Fix phys_mem_access_prot() check MIPS: Loongson: Fix find_vga_mem_init() MIPS: Loongson: Fix typo in gdium mach type string. MIPS: Use CKSEG1ADDR for uncached handler MIPS: Check for accesses beyond the end of the PGD. MIPS: Use uasm_i_ds{r,l}l_safe() instead of uasm_i_ds{r,l}l() in tlbex.c MIPS: Add uasm_i_dsrl_safe() and uasm_i_dsll_safe() to uasm. MIPS: die() does not call die notifier chain MIPS: Swarm, Littlesur: Enable PATA platform driver. ...
2010-04-30MIPS: Loongson 2F: Fix of problems introduced by -mfix-loongson2f-jumpWu Zhangjin1-1/+19
The -mfix-loongson2f-jump option provided by latest CVS binutils have fixed the out-of-order issue of Loongson-2F described in chapter 15 of the Loongson2F User Manual [1, 2], but introduced some problems. The option changes all of the jump target to "addr & 0xcfffffff" through the at($1) register, but for the reboot address of Loongson 2F 0xbfc00000 this is wrong. Avoids the problem via telling the assembler to not use the $at register. [1] Loongson2F User Manual (Chinese Version) http://www.loongson.cn/uploadfile/file/200808211 [2] English Version of Chapter 15: http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source Reported-and-tested-by: Liu Shiwei <liushiwei@gmail.com> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1109/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Loongson-2F: Use CONFIG_CPU_JUMP_WORKAROUNDS to control workarounds.Wu Zhangjin1-1/+1
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1106/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 19:12:55 +0300