summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2020-09-07arch: vdso: add vdso linker script to 'targets' instead of extra-yMasahiro Yamada6-6/+6
The vdso linker script is preprocessed on demand. Adding it to 'targets' is enough to include the .cmd file. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Greentime Hu <green.hu@gmail.com>
2020-08-23Merge tag 'powerpc-5.9-3' of ↵Linus Torvalds20-24/+160
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Add perf support for emitting extended registers for power10. - A fix for CPU hotplug on pseries, where on large/loaded systems we may not wait long enough for the CPU to be offlined, leading to crashes. - Addition of a raw cputable entry for Power10, which is not required to boot, but is required to make our PMU setup work correctly in guests. - Three fixes for the recent changes on 32-bit Book3S to move modules into their own segment for strict RWX. - A fix for a recent change in our powernv PCI code that could lead to crashes. - A change to our perf interrupt accounting to avoid soft lockups when using some events, found by syzkaller. - A change in the way we handle power loss events from the hypervisor on pseries. We no longer immediately shut down if we're told we're running on a UPS. - A few other minor fixes. Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz, Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth, Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann, Vaidyanathan Srinivasan, Vasant Hegde. * tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000 powerpc/pseries: Do not initiate shutdown when system is running on UPS powerpc/perf: Fix soft lockups due to missed interrupt accounting powerpc/powernv/pci: Fix possible crash when releasing DMA resources powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32 powerpc/fixmap: Fix the size of the early debug area powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled powerpc/kernel: Cleanup machine check function declarations powerpc: Add POWER10 raw mode cputable entry powerpc/perf: Add extended regs support for power10 platform powerpc/perf: Add support for outputting extended regs in perf intr_regs powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
2020-08-23Merge tag 'x86-urgent-2020-08-23' of ↵Linus Torvalds1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single fix for x86 which removes the RDPID usage from the paranoid entry path and unconditionally uses LSL to retrieve the CPU number. RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values and restores them either when leaving the run loop, on preemption or when going out to user space. MSR_TSX_AUX is part of that lazy MSR set, so after writing the guest value and before the lazy restore any exception using the paranoid entry will read the guest value and use it as CPU number to retrieve the GSBASE value for the current CPU when FSGSBASE is enabled. As RDPID is only used in that particular entry path, there is no reason to burden VMENTER/EXIT with two extra MSR writes. Remove the RDPID optimization, which is not even backed by numbers from the paranoid entry path instead" * tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
2020-08-23Merge tag 'perf-urgent-2020-08-23' of ↵Linus Torvalds1-3/+49
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf fix from Thomas Gleixner: "A single update for perf on x86 which has support for the broken down bandwith counters" * tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown
2020-08-23Merge tag 'efi-urgent-2020-08-23' of ↵Linus Torvalds4-86/+39
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Thomas Gleixner: - Enforce NX on RO data in mixed EFI mode - Destroy workqueue in an error handling path to prevent UAF - Stop argument parser at '--' which is the delimiter for init - Treat a NULL command line pointer as empty instead of dereferncing it unconditionally. - Handle an unterminated command line correctly - Cleanup the 32bit code leftovers and remove obsolete documentation * tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: efi: remove description of efi=old_map efi/x86: Move 32-bit code into efi_32.c efi/libstub: Handle unterminated cmdline efi/libstub: Handle NULL cmdline efi/libstub: Stop parsing arguments at "--" efi: add missed destroy_workqueue when efisubsys_init fails efi/x86: Mark kernel rodata non-executable for mixed mode
2020-08-22Merge tag 'arm64-fixes' of ↵Linus Torvalds6-22/+42
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Allow booting of late secondary CPUs affected by erratum 1418040 (currently they are parked if none of the early CPUs are affected by this erratum). - Add the 32-bit vdso Makefile to the vdso_install rule so that 'make vdso_install' installs the 32-bit compat vdso when it is compiled. - Print a warning that untrusted guests without a CPU erratum workaround (Cortex-A57 832075) may deadlock the affected system. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ARM64: vdso32: Install vdso32 from vdso_install KVM: arm64: Print warning when cpu erratum can cause guests to deadlock arm64: Allow booting of late CPUs affected by erratum 1418040 arm64: Move handling of erratum 1418040 into C code
2020-08-22Merge tag 's390-5.9-3' of ↵Linus Torvalds6-34/+69
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - a couple of fixes for storage key handling relevant for debugging - add cond_resched into potentially slow subchannels scanning loop - fixes for PF/VF linking and to ignore stale PCI configuration request events * tag 's390-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: fix PF/VF linking on hot plug s390/pci: re-introduce zpci_remove_device() s390/pci: fix zpci_bus_link_virtfn() s390/ptrace: fix storage key handling s390/runtime_instrumentation: fix storage key handling s390/pci: ignore stale configuration request event s390/cio: add cond_resched() in the slow_eval_known_fn() loop
2020-08-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds10-15/+32
Pull kvm fixes from Paolo Bonzini: - PAE and PKU bugfixes for x86 - selftests fix for new binutils - MMU notifier fix for arm64 * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set KVM: Pass MMU notifier range flags to kvm_unmap_hva_range() kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode KVM: x86: fix access code passed to gva_to_gpa selftests: kvm: Use a shorter encoding to clear RAX
2020-08-22KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not setWill Deacon1-4/+13
When an MMU notifier call results in unmapping a range that spans multiple PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary, since this avoids running into RCU stalls during VM teardown. Unfortunately, if the VM is destroyed as a result of OOM, then blocking is not permitted and the call to the scheduler triggers the following BUG(): | BUG: sleeping function called from invalid context at arch/arm64/kvm/mmu.c:394 | in_atomic(): 1, irqs_disabled(): 0, non_block: 1, pid: 36, name: oom_reaper | INFO: lockdep is turned off. | CPU: 3 PID: 36 Comm: oom_reaper Not tainted 5.8.0 #1 | Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 | Call trace: | dump_backtrace+0x0/0x284 | show_stack+0x1c/0x28 | dump_stack+0xf0/0x1a4 | ___might_sleep+0x2bc/0x2cc | unmap_stage2_range+0x160/0x1ac | kvm_unmap_hva_range+0x1a0/0x1c8 | kvm_mmu_notifier_invalidate_range_start+0x8c/0xf8 | __mmu_notifier_invalidate_range_start+0x218/0x31c | mmu_notifier_invalidate_range_start_nonblock+0x78/0xb0 | __oom_reap_task_mm+0x128/0x268 | oom_reap_task+0xac/0x298 | oom_reaper+0x178/0x17c | kthread+0x1e4/0x1fc | ret_from_fork+0x10/0x30 Use the new 'flags' argument to kvm_unmap_hva_range() to ensure that we only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is set in the notifier flags. Cc: <stable@vger.kernel.org> Fixes: 8b3405e345b5 ("kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd") Cc: Marc Zyngier <maz@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20200811102725.7121-3-will@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-22KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()Will Deacon9-9/+15
The 'flags' field of 'struct mmu_notifier_range' is used to indicate whether invalidate_range_{start,end}() are permitted to block. In the case of kvm_mmu_notifier_invalidate_range_start(), this field is not forwarded on to the architecture-specific implementation of kvm_unmap_hva_range() and therefore the backend cannot sensibly decide whether or not to block. Add an extra 'flags' parameter to kvm_unmap_hva_range() so that architectures are aware as to whether or not they are permitted to block. Cc: <stable@vger.kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20200811102725.7121-2-will@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21Merge tag 'riscv-for-linus-5.9-rc2' of ↵Linus Torvalds13-136/+76
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - The CLINT driver has been split in two: one to handle the M-mode CLINT (memory mapped and used on NOMMU systems) and one to handle the S-mode CLINT (via SBI). - The addition of SiFive's drivers to rv32_defconfig * tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Add SiFive drivers to rv32_defconfig dt-bindings: timer: Add CLINT bindings RISC-V: Remove CLINT related code from timer and arch clocksource/drivers: Add CLINT timer driver RISC-V: Add mechanism to provide custom IPI operations
2020-08-21Merge tag 'for-linus-5.9-rc2-tag' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "One build fix and a minor fix for suppressing a useless warning when booting a Xen dom0 via UEFI" * tag 'for-linus-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Fix build error when CONFIG_ACPI is not set/enabled: efi: avoid error message when booting under Xen
2020-08-21ARM64: vdso32: Install vdso32 from vdso_installStephen Boyd2-1/+2
Add the 32-bit vdso Makefile to the vdso_install rule so that 'make vdso_install' installs the 32-bit compat vdso when it is compiled. Fixes: a7f71a2c8903 ("arm64: compat: Add vDSO") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Will Deacon <will@kernel.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lore.kernel.org/r/20200818014950.42492-1-swboyd@chromium.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-08-21x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVMSean Christopherson1-4/+6
KVM has an optmization to avoid expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values and restores them either when leaving the run loop, on preemption or when going out to user space. The affected MSRs are not required for kernel context operations. This changed with the recently introduced mechanism to handle FSGSBASE in the paranoid entry code which has to retrieve the kernel GSBASE value by accessing per CPU memory. The mechanism needs to retrieve the CPU number and uses either LSL or RDPID if the processor supports it. Unfortunately RDPID uses MSR_TSC_AUX which is in the list of cached and lazily restored MSRs, which means between the point where the guest value is written and the point of restore, MSR_TSC_AUX contains a random number. If an NMI or any other exception which uses the paranoid entry path happens in such a context, then RDPID returns the random guest MSR_TSC_AUX value. As a consequence this reads from the wrong memory location to retrieve the kernel GSBASE value. Kernel GS is used to for all regular this_cpu_*() operations. If the GSBASE in the exception handler points to the per CPU memory of a different CPU then this has the obvious consequences of data corruption and crashes. As the paranoid entry path is the only place which accesses MSR_TSX_AUX (via RDPID) and the fallback via LSL is not significantly slower, remove the RDPID alternative from the entry path and always use LSL. The alternative would be to write MSR_TSC_AUX on every VMENTER and VMEXIT which would be inflicting massive overhead on that code path. [ tglx: Rewrote changelog ] Fixes: eaad981291ee3 ("x86/entry/64: Introduce the FIND_PERCPU_BASE macro") Reported-by: Tom Lendacky <thomas.lendacky@amd.com> Debugged-by: Tom Lendacky <thomas.lendacky@amd.com> Suggested-by: Andy Lutomirski <luto@kernel.org> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20200821105229.18938-1-pbonzini@redhat.com
2020-08-21powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driverKajol Jain1-1/+10
Commit 792f73f747b8 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask") added cpumask file as part of hv-24x7 driver inside the interface folder. The cpumask file is supposed to be in the top folder of the PMU driver in order to make hotplug work. This patch fixes that issue and creates new group 'cpumask_attr_group' to add cpumask file and make sure it added in top folder. command:# cat /sys/devices/hv_24x7/cpumask 0 Fixes: 792f73f747b8 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask") Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200821080610.123997-1-kjain@linux.ibm.com
2020-08-21powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000Christophe Leroy1-2/+2
In is_module_segment(), when VMALLOC_END is over 0xf0000000, ALIGN(VMALLOC_END, SZ_256M) has value 0. In that case, addr >= ALIGN(VMALLOC_END, SZ_256M) is always true then is_module_segment() always returns false. Use (ALIGN(VMALLOC_END, SZ_256M) - 1) which will have value 0xffffffff and will be suitable for the comparison. Fixes: c49643319715 ("powerpc/32s: Only leave NX unset on segments used for modules") Reported-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/09fc73fe9c7423c6b4cf93f93df9bb0ed8eefab5.1597994047.git.christophe.leroy@csgroup.eu
2020-08-21KVM: arm64: Print warning when cpu erratum can cause guests to deadlockRob Herring1-0/+4
If guests don't have certain CPU erratum workarounds implemented, then there is a possibility a guest can deadlock the system. IOW, only trusted guests should be used on systems with the erratum. This is the case for Cortex-A57 erratum 832075. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: kvmarm@lists.cs.columbia.edu Link: https://lore.kernel.org/r/20200803193127.3012242-2-robh@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-08-21arm64: Allow booting of late CPUs affected by erratum 1418040Marc Zyngier1-0/+2
As we can now switch from a system that isn't affected by 1418040 to a system that globally is affected, let's allow affected CPUs to come in at a later time. Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200731173824.107480-3-maz@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-08-21arm64: Move handling of erratum 1418040 into C codeMarc Zyngier2-21/+34
Instead of dealing with erratum 1418040 on each entry and exit, let's move the handling to __switch_to() instead, which has several advantages: - It can be applied when it matters (switching between 32 and 64 bit tasks). - It is written in C (yay!) - It can rely on static keys rather than alternatives Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200731173824.107480-2-maz@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-08-20riscv: Add SiFive drivers to rv32_defconfigBin Meng1-0/+5
This adds SiFive drivers to rv32_defconfig, to keep in sync with the 64-bit config. This is useful when testing 32-bit kernel with QEMU 'sifive_u' 32-bit machine. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-08-20RISC-V: Remove CLINT related code from timer and archAnup Patel10-109/+13
Right now the RISC-V timer driver is convoluted to support: 1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for clocksource and SBI timer calls for clockevent device. 2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO counter register for clocksource and CLINT MMIO compare register for clockevent device. We now have a separate CLINT timer driver which also provide CLINT based IPI operations so let's remove CLINT MMIO related code from arch/riscv directory and RISC-V timer driver. Signed-off-by: Anup Patel <anup.patel@wdc.com> Tested-by: Emil Renner Berhing <kernel@esmil.dk> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-08-20RISC-V: Add mechanism to provide custom IPI operationsAnup Patel6-48/+79
We add mechanism to set custom IPI operations so that CLINT driver from drivers directory can provide custom IPI operations. Signed-off-by: Anup Patel <anup.patel@wdc.com> Tested-by: Emil Renner Berhing <kernel@esmil.dk> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-08-20powerpc/pseries: Do not initiate shutdown when system is running on UPSVasant Hegde1-1/+0
As per PAPR we have to look for both EPOW sensor value and event modifier to identify the type of event and take appropriate action. In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes": SYSTEM_SHUTDOWN 3 The system must be shut down. An EPOW-aware OS logs the EPOW error log information, then schedules the system to be shut down to begin after an OS defined delay internal (default is 10 minutes.) Then in section 10.3.2.2.8 there is table 146 "Platform Event Log Format, Version 6, EPOW Section", which includes the "EPOW Event Modifier": For EPOW sensor value = 3 0x01 = Normal system shutdown with no additional delay 0x02 = Loss of utility power, system is running on UPS/Battery 0x03 = Loss of system critical functions, system should be shutdown 0x04 = Ambient temperature too high All other values = reserved We have a user space tool (rtas_errd) on LPAR to monitor for EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown after predefined time. It also starts monitoring for any new EPOW events. If it receives "Power restored" event before predefined time it will cancel the shutdown. Otherwise after predefined time it will shutdown the system. Commit 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of the "on UPS/Battery" case, to immediately shutdown the system. This breaks existing setups that rely on the userspace tool to delay shutdown and let the system run on the UPS. Fixes: 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: Massage change log and add PAPR references] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.com
2020-08-20powerpc/perf: Fix soft lockups due to missed interrupt accountingAthira Rajeev1-0/+4
Performance monitor interrupt handler checks if any counter has overflown and calls record_and_restart() in core-book3s which invokes perf_event_overflow() to record the sample information. Apart from creating sample, perf_event_overflow() also does the interrupt and period checks via perf_event_account_interrupt(). Currently we record information only if the SIAR (Sampled Instruction Address Register) valid bit is set (using siar_valid() check) and hence the interrupt check. But it is possible that we do sampling for some events that are not generating valid SIAR, and hence there is no chance to disable the event if interrupts are more than max_samples_per_tick. This leads to soft lockup. Fix this by adding perf_event_account_interrupt() in the invalid SIAR code path for a sampling event. ie if SIAR is invalid, just do interrupt check and don't record the sample information. Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1596717992-7321-1-git-send-email-atrajeev@linux.vnet.ibm.com
2020-08-20efi/x86: Move 32-bit code into efi_32.cArd Biesheuvel3-86/+37
Now that the old memmap code has been removed, some code that was left behind in arch/x86/platform/efi/efi.c is only used for 32-bit builds, which means it can live in efi_32.c as well. So move it over. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-08-20efi/x86: Mark kernel rodata non-executable for mixed modeArvind Sankar1-0/+2
When remapping the kernel rodata section RO in the EFI pagetables, the protection flags that were used for the text section are being reused, but the rodata section should not be marked executable. Cc: <stable@vger.kernel.org> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200717194526.3452089-1-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-08-20Fix build error when CONFIG_ACPI is not set/enabled:Randy Dunlap1-0/+1
../arch/x86/pci/xen.c: In function ‘pci_xen_init’: ../arch/x86/pci/xen.c:410:2: error: implicit declaration of function ‘acpi_noirq_set’; did you mean ‘acpi_irq_get’? [-Werror=implicit-function-declaration] acpi_noirq_set(); Fixes: 88e9ca161c13 ("xen/pci: Use acpi_noirq_set() helper to avoid #ifdef") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: xen-devel@lists.xenproject.org Cc: linux-pci@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-20powerpc/powernv/pci: Fix possible crash when releasing DMA resourcesFrederic Barrat1-1/+1
Fix a typo introduced during recent code cleanup, which could lead to silently not freeing resources or an oops message (on PCI hotplug or CAPI reset). Only impacts ioda2, the code path for ioda1 is correct. Fixes: 01e12629af4e ("powerpc/powernv/pci: Add explicit tracking of the DMA setup state") Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200819130741.16769-1-fbarrat@linux.ibm.com
2020-08-19x86/boot/compressed: Use builtin mem functions for decompressorArvind Sankar2-9/+3
Since commits c041b5ad8640 ("x86, boot: Create a separate string.h file to provide standard string functions") fb4cac573ef6 ("x86, boot: Move memcmp() into string.h and string.c") the decompressor stub has been using the compiler's builtin memcpy, memset and memcmp functions, _except_ where it would likely have the largest impact, in the decompression code itself. Remove the #undef's of memcpy and memset in misc.c so that the decompressor code also uses the compiler builtins. The rationale given in the comment doesn't really apply: just because some functions use the out-of-line version is no reason to not use the builtin version in the rest. Replace the comment with an explanation of why memzero and memmove are being #define'd. Drop the suggestion to #undef in boot/string.h as well: the out-of-line versions are not really optimized versions, they're generic code that's good enough for the preboot environment. The compiler will likely generate better code for constant-size memcpy/memset/memcmp if it is allowed to. Most decompressors' performance is unchanged, with the exception of LZ4 and 64-bit ZSTD. Before After ARCH LZ4 73ms 10ms 32 LZ4 120ms 10ms 64 ZSTD 90ms 74ms 64 Measurements on QEMU on 2.2GHz Broadwell Xeon, using defconfig kernels. Decompressor code size has small differences, with the largest being that 64-bit ZSTD decreases just over 2k. The largest code size increase was on 64-bit XZ, of about 400 bytes. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Suggested-by: Nick Terrell <nickrterrell@gmail.com> Tested-by: Nick Terrell <nickrterrell@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-18powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU deathMichael Roth1-6/+12
For a power9 KVM guest with XIVE enabled, running a test loop where we hotplug 384 vcpus and then unplug them, the following traces can be seen (generally within a few loops) either from the unplugged vcpu: cpu 65 (hwid 65) Ready to die... Querying DEAD? cpu 66 (66) shows 2 list_del corruption. next->prev should be c00a000002470208, but was c00a000002470048 ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:56! Oops: Exception in kernel mode, sig: 5 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: fuse nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 ... CPU: 66 PID: 0 Comm: swapper/66 Kdump: loaded Not tainted 4.18.0-221.el8.ppc64le #1 NIP: c0000000007ab50c LR: c0000000007ab508 CTR: 00000000000003ac REGS: c0000009e5a17840 TRAP: 0700 Not tainted (4.18.0-221.el8.ppc64le) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28000842 XER: 20040000 ... NIP __list_del_entry_valid+0xac/0x100 LR __list_del_entry_valid+0xa8/0x100 Call Trace: __list_del_entry_valid+0xa8/0x100 (unreliable) free_pcppages_bulk+0x1f8/0x940 free_unref_page+0xd0/0x100 xive_spapr_cleanup_queue+0x148/0x1b0 xive_teardown_cpu+0x1bc/0x240 pseries_mach_cpu_die+0x78/0x2f0 cpu_die+0x48/0x70 arch_cpu_idle_dead+0x20/0x40 do_idle+0x2f4/0x4c0 cpu_startup_entry+0x38/0x40 start_secondary+0x7bc/0x8f0 start_secondary_prolog+0x10/0x14 or on the worker thread handling the unplug: pseries-hotplug-cpu: Attempting to remove CPU <NULL>, drc index: 1000013a Querying DEAD? cpu 314 (314) shows 2 BUG: Bad page state in process kworker/u768:3 pfn:95de1 cpu 314 (hwid 314) Ready to die... page:c00a000002577840 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0x5ffffc00000000() raw: 005ffffc00000000 5deadbeef0000100 5deadbeef0000200 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffff7f 0000000000000000 page dumped because: nonzero mapcount Modules linked in: kvm xt_CHECKSUM ipt_MASQUERADE xt_conntrack ... CPU: 0 PID: 548 Comm: kworker/u768:3 Kdump: loaded Not tainted 4.18.0-224.el8.bz1856588.ppc64le #1 Workqueue: pseries hotplug workque pseries_hp_work_fn Call Trace: dump_stack+0xb0/0xf4 (unreliable) bad_page+0x12c/0x1b0 free_pcppages_bulk+0x5bc/0x940 page_alloc_cpu_dead+0x118/0x120 cpuhp_invoke_callback.constprop.5+0xb8/0x760 _cpu_down+0x188/0x340 cpu_down+0x5c/0xa0 cpu_subsys_offline+0x24/0x40 device_offline+0xf0/0x130 dlpar_offline_cpu+0x1c4/0x2a0 dlpar_cpu_remove+0xb8/0x190 dlpar_cpu_remove_by_index+0x12c/0x150 dlpar_cpu+0x94/0x800 pseries_hp_work_fn+0x128/0x1e0 process_one_work+0x304/0x5d0 worker_thread+0xcc/0x7a0 kthread+0x1ac/0x1c0 ret_from_kernel_thread+0x5c/0x80 The latter trace is due to the following sequence: page_alloc_cpu_dead drain_pages drain_pages_zone free_pcppages_bulk where drain_pages() in this case is called under the assumption that the unplugged cpu is no longer executing. To ensure that is the case, and early call is made to __cpu_die()->pseries_cpu_die(), which runs a loop that waits for the cpu to reach a halted state by polling its status via query-cpu-stopped-state RTAS calls. It only polls for 25 iterations before giving up, however, and in the trace above this results in the following being printed only .1 seconds after the hotplug worker thread begins processing the unplug request: pseries-hotplug-cpu: Attempting to remove CPU <NULL>, drc index: 1000013a Querying DEAD? cpu 314 (314) shows 2 At that point the worker thread assumes the unplugged CPU is in some unknown/dead state and procedes with the cleanup, causing the race with the XIVE cleanup code executed by the unplugged CPU. Fix this by waiting indefinitely, but also making an effort to avoid spurious lockup messages by allowing for rescheduling after polling the CPU status and printing a warning if we wait for longer than 120s. Fixes: eac1e731b59ee ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Tested-by: Greg Kurz <groug@kaod.org> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Reviewed-by: Greg Kurz <groug@kaod.org> [mpe: Trim oopses in change log slightly for readability] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200811161544.10513-1-mdroth@linux.vnet.ibm.com
2020-08-18powerpc/32s: Fix is_module_segment() when MODULES_VADDR is definedChristophe Leroy1-0/+7
When MODULES_VADDR is defined, is_module_segment() shall check the address against it instead of checking agains VMALLOC_START. Fixes: 6ca055322da8 ("powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/07884ed033c31e074747b7eb8eaa329d15db07ec.1596641219.git.christophe.leroy@csgroup.eu
2020-08-18powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32Christophe Leroy1-1/+8
On BOOK3S_32, when we have modules and strict kernel RWX, modules are not in vmalloc space but in a dedicated segment that is below PAGE_OFFSET. So KASAN_SHADOW_START must take it into account. MODULES_VADDR can't be used because it is not defined yet in kasan.h Fixes: 6ca055322da8 ("powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6eddca2d5611fd57312a88eae31278c87a8fc99d.1596641224.git.christophe.leroy@csgroup.eu
2020-08-17kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE modeJim Mattson1-1/+1
See the SDM, volume 3, section 4.4.1: If PAE paging would be in use following an execution of MOV to CR0 or MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then the PDPTEs are loaded from the address in CR3. Fixes: b9baba8614890 ("KVM, pkeys: expose CPUID/CR4 to guest") Cc: Huaitong Han <huaitong.han@intel.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Message-Id: <20200817181655.3716509-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-17kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE modeJim Mattson1-1/+1
See the SDM, volume 3, section 4.4.1: If PAE paging would be in use following an execution of MOV to CR0 or MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then the PDPTEs are loaded from the address in CR3. Fixes: 0be0226f07d14 ("KVM: MMU: fix SMAP virtualization") Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Message-Id: <20200817181655.3716509-2-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-17KVM: x86: fix access code passed to gva_to_gpaPaolo Bonzini1-1/+3
The PK bit of the error code is computed dynamically in permission_fault and therefore need not be passed to gva_to_gpa: only the access bits (fetch, user, write) need to be passed down. Not doing so causes a splat in the pku test: WARNING: CPU: 25 PID: 5465 at arch/x86/kvm/mmu.h:197 paging64_walk_addr_generic+0x594/0x750 [kvm] Hardware name: Intel Corporation WilsonCity/WilsonCity, BIOS WLYDCRB1.SYS.0014.D62.2001092233 01/09/2020 RIP: 0010:paging64_walk_addr_generic+0x594/0x750 [kvm] Code: <0f> 0b e9 db fe ff ff 44 8b 43 04 4c 89 6c 24 30 8b 13 41 39 d0 89 RSP: 0018:ff53778fc623fb60 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ff53778fc623fbf0 RCX: 0000000000000007 RDX: 0000000000000001 RSI: 0000000000000002 RDI: ff4501efba818000 RBP: 0000000000000020 R08: 0000000000000005 R09: 00000000004000e7 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007 R13: ff4501efba818388 R14: 10000000004000e7 R15: 0000000000000000 FS: 00007f2dcf31a700(0000) GS:ff4501f1c8040000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000001dea475005 CR4: 0000000000763ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: paging64_gva_to_gpa+0x3f/0xb0 [kvm] kvm_fixup_and_inject_pf_error+0x48/0xa0 [kvm] handle_exception_nmi+0x4fc/0x5b0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x911/0x1c10 [kvm] kvm_vcpu_ioctl+0x23e/0x5d0 [kvm] ksys_ioctl+0x92/0xb0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x3e/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace d17eb998aee991da ]--- Reported-by: Sean Christopherson <sean.j.christopherson@intel.com> Fixes: 897861479c064 ("KVM: x86: Add helper functions for illegal GPA checking and page fault injection") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-17arch/ia64: Restore arch-specific pgd_offset_k implementationJessica Clarke1-0/+9
IA-64 is special and treats pgd_offset_k() differently to pgd_offset(), using different formulae to calculate the indices into the kernel and user PGDs. The index into the user PGDs takes into account the region number, but the index into the kernel (init_mm) PGD always assumes a predefined kernel region number. Commit 974b9b2c68f3 ("mm: consolidate pte_index() and pte_offset_*() definitions") made IA-64 use a generic pgd_offset_k() which incorrectly used pgd_index() for kernel page tables. As a result, the index into the kernel PGD was going out of bounds and the kernel hung during early boot. Allow overrides of pgd_offset_k() and override it on IA-64 with the old implementation that will correctly index the kernel PGD. Fixes: 974b9b2c68f3 ("mm: consolidate pte_index() and pte_offset_*() definitions") Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
2020-08-17powerpc/fixmap: Fix the size of the early debug areaChristophe Leroy1-1/+1
Commit ("03fd42d458fb powerpc/fixmap: Fix FIX_EARLY_DEBUG_BASE when page size is 256k") reworked the setup of the early debug area and mistakenly replaced 128 * 1024 by SZ_128. Change to SZ_128K to restore the original 128 kbytes size of the area. Fixes: 03fd42d458fb ("powerpc/fixmap: Fix FIX_EARLY_DEBUG_BASE when page size is 256k") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/996184974d674ff984643778cf1cdd7fe58cc065.1597644194.git.christophe.leroy@csgroup.eu
2020-08-17powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabledAneesh Kumar K.V1-1/+3
IS_ENABLED() instead of #ifdef still requires variable declaration. In this specific case, default_uamor is declared in asm/pkeys.h which is only included if PPC_MEM_KEYS is enabled. arch/powerpc/mm/book3s64/hash_utils.c: In function ‘hash__early_init_mmu_secondary’: arch/powerpc/mm/book3s64/hash_utils.c:1119:21: error: ‘default_uamor’ undeclared (first use in this function) 1119 | mtspr(SPRN_UAMOR, default_uamor); | ^~~~~~~~~~~~~ Fixes: 6553fb799f60 ("powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200817103301.158836-1-aneesh.kumar@linux.ibm.com
2020-08-17s390/pci: fix PF/VF linking on hot plugNiklas Schnelle3-13/+32
Currently there are four places in which a PCI function is scanned and made available to drivers: 1. In pci_scan_root_bus() as part of the initial zbus creation. 2. In zpci_bus_add_devices() when registering a device in configured state on a zbus that has already been scanned. 3. When a function is already known to zPCI (in reserved/standby state) and configuration is triggered through firmware by PEC 0x301. 4. When a device is already known to zPCI (in standby/reserved state) and configuration is triggered from within Linux using enable_slot(). The PF/VF linking step and setting of pdev->is_virtfn introduced with commit e5794cf1a270 ("s390/pci: create links between PFs and VFs") was only triggered for the second case, which is where VFs created through sriov_numvfs usually land. However unlike some other platforms but like POWER VFs can be individually enabled/disabled through /sys/bus/pci/slots. Fix this by doing VF setup as part of pcibios_bus_add_device() which is called in all of the above cases. Finally to remove the PF/VF links call the common code pci_iov_remove_virtfn() function to remove linked VFs. This takes care of the necessary sysfs cleanup. Fixes: e5794cf1a270 ("s390/pci: create links between PFs and VFs") Cc: <stable@vger.kernel.org> # 5.8: 2f0230b2f2d5: s390/pci: re-introduce zpci_remove_device() Cc: <stable@vger.kernel.org> # 5.8 Acked-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-17s390/pci: re-introduce zpci_remove_device()Niklas Schnelle2-9/+14
For fixing the PF to VF link removal we need to perform some action on every removal of a zdev from the common PCI subsystem. So in preparation re-introduce zpci_remove_device() and use that instead of directly calling the common code functions. This was actually still declared from earlier code but no longer implemented. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-17s390/pci: fix zpci_bus_link_virtfn()Niklas Schnelle1-10/+15
We were missing the pci_dev_put() for candidate PFs. Furhtermore in discussion with upstream it turns out that somewhat counterintuitively some common code, in particular the vfio-pci driver, assumes that pdev->is_virtfn always implies that pdev->physfn is set, i.e. that VFs are always linked. While POWER does seem to set pdev->is_virtfn even for unlinked functions (see comments in arch/powerpc/kernel/eeh.c:eeh_debugfs_break_device()) for now just be safe and only set pdev->is_virtfn on linking. Also make sure that we only search for parent PFs if the zbus is multifunction and we thus know the devfn values supplied by firmware come from the RID. Fixes: e5794cf1a270 ("s390/pci: create links between PFs and VFs") Cc: <stable@vger.kernel.org> # 5.8 Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-17s390/ptrace: fix storage key handlingHeiko Carstens1-2/+5
The key member of the runtime instrumentation control block contains only the access key, not the complete storage key. Therefore the value must be shifted by four bits. Since existing user space does not necessarily query and set the access key correctly, just ignore the user space provided key and use the correct one. Note: this is only relevant for debugging purposes in case somebody compiles a kernel with a default storage access key set to a value not equal to zero. Fixes: 262832bc5acd ("s390/ptrace: add runtime instrumention register get/set") Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-17s390/runtime_instrumentation: fix storage key handlingHeiko Carstens1-1/+1
The key member of the runtime instrumentation control block contains only the access key, not the complete storage key. Therefore the value must be shifted by four bits. Note: this is only relevant for debugging purposes in case somebody compiles a kernel with a default storage access key set to a value not equal to zero. Fixes: e4b8b3f33fca ("s390: add support for runtime instrumentation") Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-17s390/pci: ignore stale configuration request eventNiklas Schnelle1-0/+3
A configuration request event may be stale, that is the event may reference a zdev which was already configured. This can happen when a hotplug happens during boot such that the device is discovered and configured in the initial clp_list_pci(), then after initialization we enable events and process the original configuration request which additionally still contains the old disabled function handle leading to a failure during device enablement and subsequent I/O lockout. Fix this by restoring the check that the device to be configured is in standby which was removed in commit f606b3ef47c9 ("s390/pci: adapt events for zbus"). This check does not need serialization as we only enable the events after zPCI has fully initialized, which includes the initial clp_list_pci(), rescan only does updates and events are serialized with respect to each other. Fixes: f606b3ef47c9 ("s390/pci: adapt events for zbus") Cc: <stable@vger.kernel.org> # 5.8 Reported-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com> Tested-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com> Acked-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-17powerpc/kernel: Cleanup machine check function declarationsMadhavan Srinivasan4-8/+12
__machine_check_early_realmode_p*() are currently declared as extern in cputable.c and because of this when compiled with "C=1" (which enables semantic checker) produces these warnings. CHECK arch/powerpc/kernel/mce_power.c arch/powerpc/kernel/mce_power.c:709:6: warning: symbol '__machine_check_early_realmode_p7' was not declared. Should it be static? arch/powerpc/kernel/mce_power.c:717:6: warning: symbol '__machine_check_early_realmode_p8' was not declared. Should it be static? arch/powerpc/kernel/mce_power.c:722:6: warning: symbol '__machine_check_early_realmode_p9' was not declared. Should it be static? arch/powerpc/kernel/mce_power.c:740:6: warning: symbol '__machine_check_early_realmode_p10' was not declared. Should it be static? Patch here moves the declaration to asm/mce.h and includes the same in cputable.c Fixes: ae744f3432d3 ("powerpc/book3s: Flush SLB/TLBs if we get SLB/TLB machine check errors on power8") Fixes: 7b9f71f974a1 ("powerpc/64s: POWER9 machine check handler") Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200817005618.3305028-1-maddy@linux.ibm.com
2020-08-17powerpc: Add POWER10 raw mode cputable entryMadhavan Srinivasan1-0/+20
Add a raw mode cputable entry for POWER10. Copies most of the fields from commit a3ea40d5c736 ("powerpc: Add POWER10 architected mode") except for oprofile_cpu_type, machine_check_early, pvr_mask and pvr_mask fields. On bare metal systems we use DT CPU features, which doesn't need a cputable entry. But in VMs we still rely on the raw cputable entry to set the correct values for the PMU related fields. Fixes: a3ea40d5c736 ("powerpc: Add POWER10 architected mode") Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> [mpe: Reorder vs cleanup patch and add Fixes tag] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200817005618.3305028-2-maddy@linux.ibm.com
2020-08-17powerpc/perf: Add extended regs support for power10 platformAthira Rajeev3-1/+23
Include capability flag PERF_PMU_CAP_EXTENDED_REGS for power10 and expose MMCR3, SIER2, SIER3 registers as part of extended regs. Also introduce PERF_REG_PMU_MASK_31 to define extended mask value at runtime for power10. Suggested-by: Ryan Grimm <grimm@linux.ibm.com> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Nageswara R Sastry <nasastry@in.ibm.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1596794701-23530-3-git-send-email-atrajeev@linux.vnet.ibm.com
2020-08-17powerpc/perf: Add support for outputting extended regs in perf intr_regsAnju T Sudhakar6-4/+59
Add support for perf extended register capability in powerpc. The capability flag PERF_PMU_CAP_EXTENDED_REGS, is used to indicate the PMU which support extended registers. The generic code define the mask of extended registers as 0 for non supported architectures. Patch adds extended regs support for power9 platform by exposing MMCR0, MMCR1 and MMCR2 registers. REG_RESERVED mask needs update to include extended regs. PERF_REG_EXTENDED_MASK, contains mask value of the supported registers, is defined at runtime in the kernel based on platform since the supported registers may differ from one processor version to another and hence the MASK value. With the patch: available registers: r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 r13 r14 r15 r16 r17 r18 r19 r20 r21 r22 r23 r24 r25 r26 r27 r28 r29 r30 r31 nip msr orig_r3 ctr link xer ccr softe trap dar dsisr sier mmcra mmcr0 mmcr1 mmcr2 PERF_RECORD_SAMPLE(IP, 0x1): 4784/4784: 0 period: 1 addr: 0 ... intr regs: mask 0xffffffffffff ABI 64-bit .... r0 0xc00000000012b77c .... r1 0xc000003fe5e03930 .... r2 0xc000000001b0e000 .... r3 0xc000003fdcddf800 .... r4 0xc000003fc7880000 .... r5 0x9c422724be .... r6 0xc000003fe5e03908 .... r7 0xffffff63bddc8706 .... r8 0x9e4 .... r9 0x0 .... r10 0x1 .... r11 0x0 .... r12 0xc0000000001299c0 .... r13 0xc000003ffffc4800 .... r14 0x0 .... r15 0x7fffdd8b8b00 .... r16 0x0 .... r17 0x7fffdd8be6b8 .... r18 0x7e7076607730 .... r19 0x2f .... r20 0xc00000001fc26c68 .... r21 0xc0002041e4227e00 .... r22 0xc00000002018fb60 .... r23 0x1 .... r24 0xc000003ffec4d900 .... r25 0x80000000 .... r26 0x0 .... r27 0x1 .... r28 0x1 .... r29 0xc000000001be1260 .... r30 0x6008010 .... r31 0xc000003ffebb7218 .... nip 0xc00000000012b910 .... msr 0x9000000000009033 .... orig_r3 0xc00000000012b86c .... ctr 0xc0000000001299c0 .... link 0xc00000000012b77c .... xer 0x0 .... ccr 0x28002222 .... softe 0x1 .... trap 0xf00 .... dar 0x0 .... dsisr 0x80000000000 .... sier 0x0 .... mmcra 0x80000000000 .... mmcr0 0x82008090 .... mmcr1 0x1e000000 .... mmcr2 0x0 ... thread: perf:4784 Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Nageswara R Sastry <nasastry@in.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1596794701-23530-2-git-send-email-atrajeev@linux.vnet.ibm.com
2020-08-17powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 coresMichael Neuling1-0/+1
On POWER10 bit 12 in the PVR indicates if the core is SMT4 or SMT8. Bit 12 is set for SMT4. Without this patch, /proc/cpuinfo on a SMT4 DD1 POWER10 looks like this: cpu : POWER10, altivec supported revision : 17.0 (pvr 0080 1100) Fixes: a3ea40d5c736 ("powerpc: Add POWER10 architected mode") Cc: stable@vger.kernel.org # v5.8 Signed-off-by: Michael Neuling <mikey@neuling.org> Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200803035600.1820371-1-mikey@neuling.org
2020-08-16parisc: fix PMD pages allocation by restoring pmd_alloc_one()Mike Rapoport1-0/+6
Commit 1355c31eeb7e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") converted parisc to use generic version of pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for PMD. Restore the original version of pmd_alloc_one() for parisc, just use GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and memset. Fixes: 1355c31eeb7e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Meelis Roos <mroos@linux.ee> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.ee Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 21:00:24 +0300