summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2016-01-30Merge branch 'for-linus' of ↵Linus Torvalds31-136/+135
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "An optimization for irq-restore, the SSM instruction is quite a bit slower than an if-statement and a STOSM. The copy_file_range system all is added. Cleanup for PCI and CIO. And a couple of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: update measurement characteristics s390/cio: ensure consistent measurement state s390/cio: fix measurement characteristics memleak s390/zcrypt: Fix cryptographic device id in kernel messages s390/pci: remove iomap sanity checks s390/pci: set error state for unusable functions s390/pci: fix bar check s390/pci: resize iomap s390/pci: improve ZPCI_* macros s390/pci: provide ZPCI_ADDR macro s390/pci: adjust IOMAP_MAX_ENTRIES s390/numa: move numa_init_late() from device to arch_initcall s390: remove all usages of PSW_ADDR_INSN s390: remove all usages of PSW_ADDR_AMODE s390: wire up copy_file_range syscall s390: remove superfluous memblock_alloc() return value checks s390/numa: allocate memory with correct alignment s390/irqflags: optimize irq restore s390/mm: use TASK_MAX_SIZE where applicable
2016-01-27Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-1/+0
Pull virtio tests and fixes from Michael Tsirkin: "This fixes existing tests broken by barrier rework, and adds some new tests. Plus, there's a fix for an old bug in virtio-pci" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: tools/virtio: add ringtest utilities sh: fix smp_store_mb for !SMP tools/virtio: use virt_xxx barriers virtio_pci: fix use after free on release
2016-01-27Merge tag 'arm64-fixes' of ↵Linus Torvalds10-46/+94
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The main thing here is to get us booting under qemu again after it turned out that not all of the PMU registers are emulated there, causing us to die early in boot. - Ensure we don't access PMU registers of the PMU is not implemented (fixes booting under QEMU) - Fix BUG_ON triggered during module loading with DEBUG_SET_MODULE_RONX - Ensure the kasan zero page is read-only - Hide __efistub_ symbol aliases from kallsyms, since they otherwise confuse the backtrace code - Ensure !PTE_WRITE kernel ptes are marked as read-only - defconfig updates based on requests and patches on the list - Other minor fixes (typos, build system)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: avoid calling apply_to_page_range on empty range arm64: defconfig: updates for 4.5 arm64: errata: Add -mpc-relative-literal-loads to build flags Eliminate the .eh_frame sections from the aarch64 vmlinux and kernel modules arm64: Fix an enum typo in mm/dump.c arm64: Honour !PTE_WRITE in set_pte_at() for kernel mappings arm64: kernel: fix architected PMU registers unconditional access arm64: kasan: ensure that the KASAN zero page is mapped read-only arm64: hide __efistub_ aliases from kallsyms
2016-01-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds9-97/+76
Pull KVM fixes from Paolo Bonzini: "s390 and POWER bug fixes, plus enabling the KVM-VFIO interface on s390" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM doc: Fix KVM_SMI chapter number KVM: s390: fix memory overwrites when vx is disabled KVM: s390: Enable the KVM-VFIO device KVM: s390: fix guest fprs memory leak KVM: PPC: Fix ONE_REG AltiVec support KVM: PPC: Increase memslots to 512 KVM: PPC: Book3S PR: Remove unused variable 'vcpu_book3s' KVM: PPC: Fix emulation of H_SET_DABR/X on POWER8 KVM: PPC: Book3S HV: Handle unexpected traps in guest entry/exit code better
2016-01-26arm64: mm: avoid calling apply_to_page_range on empty rangeMika Penttilä1-0/+3
Calling apply_to_page_range with an empty range results in a BUG_ON from the core code. This can be triggered by trying to load the st_drv module with CONFIG_DEBUG_SET_MODULE_RONX enabled: kernel BUG at mm/memory.c:1874! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 3 PID: 1764 Comm: insmod Not tainted 4.5.0-rc1+ #2 Hardware name: ARM Juno development board (r0) (DT) task: ffffffc9763b8000 ti: ffffffc975af8000 task.ti: ffffffc975af8000 PC is at apply_to_page_range+0x2cc/0x2d0 LR is at change_memory_common+0x80/0x108 This patch fixes the issue by making change_memory_common (called by the set_memory_* functions) a NOP when numpages == 0, therefore avoiding the erroneous call to apply_to_page_range and bringing us into line with x86 and s390. Cc: <stable@vger.kernel.org> Reviewed-by: Laura Abbott <labbott@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Mika Penttilä <mika.penttila@nextfour.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26Merge tag 'kvm-s390-master-4.5-1' of ↵Paolo Bonzini587-4317/+7592
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes for kvm/master (targeting 4.5) 1. Fallout of some bigger floating point/vector rework in s390 - memory leak -> stable 4.3+ - memory overwrite -> stable 4.4+ 2. enable KVM-VFIO for s390
2016-01-26KVM: s390: fix memory overwrites when vx is disabledDavid Hildenbrand2-84/+43
The kernel now always uses vector registers when available, however KVM has special logic if support is really enabled for a guest. If support is disabled, guest_fpregs.fregs will only contain memory for the fpu. The kernel, however, will store vector registers into that area, resulting in crazy memory overwrites. Simply extending that area is not enough, because the format of the registers also changes. We would have to do additional conversions, making the code even more complex. Therefore let's directly use one place for the vector/fpu registers + fpc (in kvm_run). We just have to convert the data properly when accessing it. This makes current code much easier. Please note that vector/fpu registers are now always stored to vcpu->run->s.regs.vrs. Although this data is visible to QEMU and used for migration, we only guarantee valid values to user space when KVM_SYNC_VRS is set. As that is only the case when we have vector register support, we are on the safe side. Fixes: b5510d9b68c3 ("s390/fpu: always enable the vector facility if it is available") Cc: stable@vger.kernel.org # v4.4 d9a3a09af54d s390/kvm: remove dependency on struct save_area definition Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [adopt to d9a3a09af54d]
2016-01-26KVM: s390: Enable the KVM-VFIO deviceDong Jia Shi2-1/+2
The KVM-VFIO device is used by the QEMU VFIO device. It is used to record the list of in-use VFIO groups so that KVM can manipulate them. While we don't need this on s390 currently, let's try to be like everyone else. Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-01-26KVM: s390: fix guest fprs memory leakDavid Hildenbrand1-1/+4
fprs is never freed, therefore resulting in a memory leak if kvm_vcpu_init() fails or the vcpu is destroyed. Fixes: 9977e886cbbc ("s390/kernel: lazy restore fpu registers") Cc: stable@vger.kernel.org # v4.3+ Reported-by: Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-01-26s390/pci: remove iomap sanity checksSebastian Ott1-9/+4
Since each iomap_entry handles only one bar of one pci function (even when disjunct ranges of a bar are mapped) the sanity check in pci_iomap_range is not needed and can be removed. Also convert the remaining BUG_ONs to WARN_ONs. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26s390/pci: set error state for unusable functionsSebastian Ott1-0/+5
We receive special notifications from firmware when an error was detected and a pci function became unusable. Set the error_state accordingly to give device drivers a hint that they don't need to try error recovery. Suggested-by: Alexander Schmidt <alexschm@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26s390/pci: fix bar checkSebastian Ott1-1/+1
Fix the check which bar space we should map to allow available bars only. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26s390/pci: resize iomapSebastian Ott1-12/+22
On s390 we need to maintain a mapping between iomem addresses and arch specific function identifiers. Currently the mapping table is created as such that we could span the whole iomem address space. Since we can only map each bar space from each possible function we have an upper bound for the number of mapping entries. This reduces the size of the iomap from 256K to less than 4K (using the defconfig). Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26s390/pci: improve ZPCI_* macrosSebastian Ott2-7/+10
Most of the constants defined in pci_io.h depend on each other and thus can be calculated. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26s390/pci: provide ZPCI_ADDR macroSebastian Ott2-7/+4
Provide and use a ZPCI_ADDR macro as the complement of ZPCI_IDX to get rid of some constants in the code. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26s390/pci: adjust IOMAP_MAX_ENTRIESSebastian Ott1-1/+1
ZPCI_IOMAP_MAX_ENTRIES is off by one. Let's adjust this for the sake of correctness. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26s390/numa: move numa_init_late() from device to arch_initcallMichael Holzheu1-1/+1
Commit 3e89e1c5ea ("hugetlb: make mm and fs code explicitly non-modular") moves hugetlb_init() from module_init to subsys_initcall. The hugetlb_init()->hugetlb_register_node() code accesses "node->dev.kobj" which is initialized in numa_init_late(). Since numa_init_late() is a device_initcall which is called *after* subsys_initcall the above mentioned patch breaks NUMA on s390. So fix this and move numa_init_late() to arch_initcall. Fixes: 3e89e1c5ea ("hugetlb: make mm and fs code explicitly non-modular") Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26arm64: defconfig: updates for 4.5Will Deacon1-17/+25
Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26arm64: errata: Add -mpc-relative-literal-loads to build flagsdann frazier1-0/+1
GCC6 (and Linaro's 2015.12 snapshot of GCC5) has a new default that uses adrp/ldr or adrp/add to address literal pools. When CONFIG_ARM64_ERRATUM_843419 is enabled, modules built with this toolchain fail to load: module libahci: unsupported RELA relocation: 275 This patch fixes the problem by passing '-mpc-relative-literal-loads' to the compiler. Cc: stable@vger.kernel.org Fixes: df057cc7b4fa ("arm64: errata: add module build workaround for erratum #843419") BugLink: http://bugs.launchpad.net/bugs/1533009 Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Suggested-by: Christophe Lyon <christophe.lyon@linaro.org> Signed-off-by: Dann Frazier <dann.frazier@canonical.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26Eliminate the .eh_frame sections from the aarch64 vmlinux and kernel modulesWilliam Cohen1-0/+1
By default the aarch64 gcc generates .eh_frame sections. Unlike .debug_frame sections, the .eh_frame sections are loaded into memory when the associated code is loaded. On an example kernel being built with this default the .eh_frame section in vmlinux used an extra 1.7MB of memory. The x86 disables the creation of the .eh_frame section. The aarch64 should probably do the same to save some memory. Signed-off-by: William Cohen <wcohen@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26sh: fix smp_store_mb for !SMPMichael S. Tsirkin1-1/+0
sh variant of smp_store_mb() calls xchg() on !SMP which is stronger than implied by both the name and the documentation. commit 90a3ccb0be538a914e6a5c51ae919762261563ad ("sh: define __smp_xxx, fix smp_store_mb for !SMP") was supposed to fix it but left the bug in place. Drop smp_store_mb, so that code in asm-generic/barrier.h will define it correctly depending on CONFIG_SMP. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-25arm64: Fix an enum typo in mm/dump.cMasanari Iida1-1/+1
This patch fixes a typo in mm/dump.c: "MODUELS_END_NR" should be "MODULES_END_NR". Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-25arm64: Honour !PTE_WRITE in set_pte_at() for kernel mappingsCatalin Marinas1-11/+10
Currently, set_pte_at() only checks the software PTE_WRITE bit for user mappings when it sets or clears the hardware PTE_RDONLY accordingly. The kernel ptes are written directly without any modification, relying solely on the protection bits in macros like PAGE_KERNEL. However, modifying kernel pte attributes via pte_wrprotect() would be ignored by set_pte_at(). Since pte_wrprotect() does not set PTE_RDONLY (it only clears PTE_WRITE), the new permission is not taken into account. This patch changes set_pte_at() to adjust the read-only permission for kernel ptes as well. As a side effect, existing PROT_* definitions used for kernel ioremap*() need to include PTE_DIRTY | PTE_WRITE. (additionally, white space fix for PTE_KERNEL_ROX) Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-25arm64: kernel: fix architected PMU registers unconditional accessLorenzo Pieralisi3-2/+19
The Performance Monitors extension is an optional feature of the AArch64 architecture, therefore, in order to access Performance Monitors registers safely, the kernel should detect the architected PMU unit presence through the ID_AA64DFR0_EL1 register PMUVer field before accessing them. This patch implements a guard by reading the ID_AA64DFR0_EL1 register PMUVer field to detect the architected PMU presence and prevent accessing PMU system registers if the Performance Monitors extension is not implemented in the core. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Fixes: 60792ad349f3 ("arm64: kernel: enforce pmuserenr_el0 initialization and restore") Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-25arm64: kasan: ensure that the KASAN zero page is mapped read-onlyArd Biesheuvel1-0/+9
When switching from the early KASAN shadow region, which maps the entire shadow space read-write, to the permanent KASAN shadow region, which uses a zero page to shadow regions that are not subject to instrumentation, the lowest level table kasan_zero_pte[] may be reused unmodified, which means that the mappings of the zero page that it contains will still be read-write. So update it explicitly to map the zero page read only when we activate the permanent mapping. Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-25arm64: hide __efistub_ aliases from kallsymsArd Biesheuvel1-15/+25
Commit e8f3010f7326 ("arm64/efi: isolate EFI stub from the kernel proper") isolated the EFI stub code from the kernel proper by prefixing all of its symbols with __efistub_, and selectively allowing access to core kernel symbols from the stub by emitting __efistub_ aliases for functions and variables that the stub can access legally. As an unintended side effect, these aliases are emitted into the kallsyms symbol table, which means they may turn up in backtraces, e.g., ... PC is at __efistub_memset+0x108/0x200 LR is at fixup_init+0x3c/0x48 ... [<ffffff8008328608>] __efistub_memset+0x108/0x200 [<ffffff8008094dcc>] free_initmem+0x2c/0x40 [<ffffff8008645198>] kernel_init+0x20/0xe0 [<ffffff8008085cd0>] ret_from_fork+0x10/0x40 The backtrace in question has nothing to do with the EFI stub, but simply returns one of the several aliases of memset() that have been recorded in the kallsyms table. This is undesirable, since it may suggest to people who are not aware of this that the issue they are seeing is somehow EFI related. So hide the __efistub_ aliases from kallsyms, by emitting them as absolute linker symbols explicitly. The distinction between those and section relative symbols is completely irrelevant to these definitions, and to the final link we are performing when these definitions are being taken into account (the distinction is only relevant to symbols defined inside a section definition when performing a partial link), and so the resulting values are identical to the original ones. Since absolute symbols are ignored by kallsyms, this will result in these values to be omitted from its symbol table. After this patch, the backtrace generated from the same address looks like this: ... PC is at __memset+0x108/0x200 LR is at fixup_init+0x3c/0x48 ... [<ffffff8008328608>] __memset+0x108/0x200 [<ffffff8008094dcc>] free_initmem+0x2c/0x40 [<ffffff8008645198>] kernel_init+0x20/0xe0 [<ffffff8008085cd0>] ret_from_fork+0x10/0x40 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-24Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds115-757/+4144
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes. The executive summary: - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY. - Avoid useless rebuilds for zboot. - jz4780: Add NEMC, BCH and NAND device tree nodes - Initial support for the MicroChip's DT platform. As all the device drivers are missing this is still of limited use. - Some Loongson3 cleanups. - The unavoidable whitespace polishing. - Reduce clock skew when synchronizing the CPU cycle counters on CPU startup. - Add MIPS R6 fixes. - Lots of cleanups across arch/mips as fallout from KVM. - Lots of minor fixes and changes for IEEE 754-2008 support to the FPU emulator / fp-assist software. - Minor Ralink, BCM47xx and bcm963xx platform support improvments. - Support SMP on BCM63168" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits) MIPS: zboot: Add support for serial debug using the PROM MIPS: zboot: Avoid useless rebuilds MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function MIPS: bcm963xx: Update bcm_tag field image_sequence MIPS: bcm963xx: Move extended flash address to bcm_tag header file MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure MIPS: bcm63xx: nvram: Use nvram structure definition from header file MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure MAINTAINERS: Add KVM for MIPS entry MIPS: KVM: Add missing newline to kvm_err() MIPS: Move KVM specific opcodes into asm/inst.h MIPS: KVM: Use cacheops.h definitions MIPS: Break down cacheops.h definitions MIPS: Use EXCCODE_ constants with set_except_vector() MIPS: Update trap codes MIPS: Move Cause.ExcCode trap codes to mipsregs.h MIPS: KVM: Make kvm_mips_{init,exit}() static MIPS: KVM: Refactor added offsetof()s MIPS: KVM: Convert EXPORT_SYMBOL to _GPL ...
2016-01-24Merge branch '4.4-fixes' into mips-for-linux-nextRalf Baechle6-3/+11
2016-01-24MIPS: zboot: Add support for serial debug using the PROMAlban Bedel3-0/+12
As most platforms implement the PROM serial interface prom_putchar() add a simple bridge to allow re-using this code for zboot. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11811/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: zboot: Avoid useless rebuildsAlban Bedel1-6/+8
Add dummy.o to the targets list, and fill targets automatically from $(vmlinuzobjs) to avoid having to maintain two lists. When building with XZ compression copy ashldi3.c to the build directory to use a different object file for the kernel and zboot. Without this the same object file need to be build with different flags which cause a rebuild at every run. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Alex Smith <alex.smith@imgtec.com> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11810/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIBFlorian Fainelli1-0/+1
Allow BMIPS_GENERIC supported platforms to build GPIO controller drivers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Dragan Stancevic <dragan.stancevic@gmail.com> Cc: cernekee@gmail.com Cc: jaedon.shin@gmail.com Cc: gregory.0xf0@gmail.com Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12019/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() functionSimon Arlott2-13/+0
Remove bcm63xx_nvram_get_psi_size() as it now has no users. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11836/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structureSimon Arlott1-96/+0
Move Broadcom BCM963xx image tag data structure to include/linux/ so that drivers outside of mach-bcm63xx can use it. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11832/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bcm63xx: nvram: Use nvram structure definition from header fileSimon Arlott1-32/+3
Use the common definition of the nvram structure from the header file include/linux/bcm963xx_nvram.h instead of maintaining a separate copy. Read the version 5 size of nvram data from memory and then call the new checksum verification function from the header file. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11831/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Add missing newline to kvm_err()James Hogan1-1/+1
Add missing newline to end of kvm_err string when guest PMAP couldn't be allocated. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11896/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Move KVM specific opcodes into asm/inst.hJames Hogan4-28/+5
The header arch/mips/kvm/opcode.h defines a few extra opcodes which aren't in arch/mips/include/uapi/asm/inst.h. There's nothing KVM specific about them, so lets move them into inst.h where they belong and delete the header. Note that mfmcz_op is renamed to mfmc0_op to match the instruction set manual, and wait_op was already added to inst.h in commit b0a3eae2b943 ("MIPS: inst.h: define COP0 wait op"), merged in v3.16-rc1. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11895/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Use cacheops.h definitionsJames Hogan1-22/+8
Drop the custom cache operation code definitions used by KVM for emulating guest CACHE instructions, and switch to use the existing definitions in <asm/cacheops.h>. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11893/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Break down cacheops.h definitionsJames Hogan1-42/+64
Most of the cache op codes defined in cacheops.h are split into a 2-bit cache identifier, and a 3-bit cache op code which does largely the same thing semantically regardless of the cache identifier. To allow the use of these definitions by KVM for decoding cache ops, break the definitions down into parts where it makes sense to do so, and add masks for the Cache and Op field within the cache op. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11892/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Use EXCCODE_ constants with set_except_vector()James Hogan2-30/+30
The first argument to set_except_vector is the ExcCode, which we now have definitions for. Lets make use of them. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11894/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Update trap codesJames Hogan1-2/+10
Add a few missing trap codes. [ralf@linux-mips.org: Drop removal of exception codes. I don't care what the incomplete architecture spec says; it can't change existing hardware and VCEI is supported indeed.] Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11890/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Move Cause.ExcCode trap codes to mipsregs.hJames Hogan5-83/+80
Move the Cause.ExcCode trap code definitions from kvm_host.h to mipsregs.h, since they describe architectural bits rather than KVM specific constants, and change the prefix from T_ to EXCCODE_. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11891/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Make kvm_mips_{init,exit}() staticJames Hogan1-2/+2
The module init and exit functions have no need to be global, so make them static. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11889/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Refactor added offsetof()sJames Hogan1-7/+3
When calculating the offsets into the commpage for dynamically translated mtc0/mfc0 guest instructions, multiple offsetof()s are added together to find the offset of the specific register in the mips_coproc, within the commpage. Simplify each of these cases to a single offsetof() to find the offset of the specific register within the commpage. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11888/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Convert EXPORT_SYMBOL to _GPLJames Hogan2-19/+19
Export symbols only to GPL modules to match other KVM symbols in virt/kvm/ and arch/*/kvm/. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11887/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Drop unused kvm_mips_host_tlb_inv_index()James Hogan2-38/+0
The function kvm_mips_host_tlb_inv_index() is unused, so drop it completely. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11886/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Move definition of DC bit to mipsregs.hJames Hogan2-3/+2
The CAUSEB_DC and CAUSEF_DC definitions used by KVM are defined in asm/kvm_host.h, but all the other Cause register field definitions are found in asm/mipsregs.h. Lets reunite the DC bit definitions with its friends in mipsregs.h. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11885/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Drop some unused definitions from kvm_host.hJames Hogan1-5/+0
Some definitions in the MIPS asm/kvm_host.h are completely unused, so lets drop them. MS_TO_NS is no longer used since commit e30492bbe95a ("MIPS: KVM: Rewrite count/compare timer emulation"). The others don't appear ever to have been used. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11884/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Trivial whitespace and style fixesJames Hogan5-15/+14
A bunch of misc whitespace and style fixes within arch/mips/kvm/. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11883/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: pic32mzda: Add initial PIC32MZDA Starter Kit defconfigJoshua Henderson1-0/+89
This adds an initial default config that enables all available PIC32 drivers and is enough for booting a PIC32MZDA Starter Kit. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12105/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: dts: Add initial DTS for the PIC32MZDA Starter KitJoshua Henderson6-0/+697
This adds basic DTS configuration for the PIC32MZDA chip and in turn the PIC32MZDA Starter Kit. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12104/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 23:58:50 +0300