| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
ARM: tegra: Core changes for v5.2-rc1
One of these patches enables PM by default on 32-bit ARM, following the
same default that we already have on 64-bit ARM. The other patch fixes a
cosmetic issue in the cpuidle driver for Tegra20 and Tegra30.
* tag 'tegra-for-5.2-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30
ARM: tegra: enforce PM requirement
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
memory: tegra: Changes for v5.2-rc1
These are a set of fixes for various issues related to the Tegra memory
controller.
* tag 'tegra-for-5.2-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Fix a typos for "fdcdwr2" mc client
Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+"
memory: tegra: Replace readl-writel with mc_readl-mc_writel
memory: tegra: Fix integer overflow on tick value calculation
memory: tegra: Fix missed registers values latching
memory: tegra: Properly spell "tegra"
memory: tegra: Make terga20_mc_reset_ops static
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers
PM changes for am335x and am437x
This series adds support for am437x RTC-only mode in suspend. In the
RTC-only mode suspend, everything is shut down except the RTC. This
makes the power consumption very low for suspend mode.
To support RTC-only mode, we need to export omap_rtc_power_off_program()
from the rtc driver and improve PM code to save and restore the wkup
domain context. As RTC-only mode depends on the device being wired
properly for things like memory, we need to also check for the machine
type before we allow it. We also need to run DDR3 hardware leveling on
resume.
Note that there is a trivial merge conflict between the RTC branch
and these changes where the RTC branch makes tm2bcd() a void function
and the error handling parts can be just dropped.
* tag 'omap-for-v5.2/am4-pm-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: sleep43xx: Run EMIF HW leveling on resume path
memory: ti-emif-sram: Add ti_emif_run_hw_leveling for DDR3 hardware leveling
soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support
soc: ti: pm33xx: Move the am33xx_push_sram_idle to the top
ARM: OMAP2+: pm33xx: Add support for rtc+ddr in self refresh mode
rtc: OMAP: Add support for rtc-only mode
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Turned out that the actual bug was in the Memory Controller driver
that programmed shadowed registers without latching the new values
and then there was a bug on EMEM arbitration configuration calculation
that results in a wrong value being latched on resume from suspend.
The Memory Controller has been fixed properly now, hence the workaround
patch could be reverted safely.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Tegra20/30 drivers do not handle the tick_broadcast_enter() error which
potentially could happen when CPU timer isn't permitted to be stopped.
Let's just move out the broadcasting to the CPUIDLE core by setting the
respective flag in the Tegra20/30 drivers. This patch doesn't fix any
problem because currently tick_broadcast_enter() could fail only on
ARM64, so consider this change as a minor cleanup.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
|
|
When returning from DeepSleep mode on AM437x platforms the EMIF must run
DDR hardware leveling, same as done during u-boot, to properly restore the
EMIF PHY to it's operational state on platforms using DDR3.
Call the ti-emif-sram-pm run_hw_leveling routine to perform this. This
happens after all other EMIF values are restored so the exact same
configuration used at boot is used at the end of EMIF resume as well.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Add support for rtc+ddr in self refresh mode. Add addtional
pm hooks for save/restore and rtc suspend/resume.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Pull KVM fixes from Paolo Bonzini:
"A collection of x86 and ARM bugfixes, and some improvements to
documentation.
On top of this, a cleanup of kvm_para.h headers, which were exported
by some architectures even though they not support KVM at all. This is
responsible for all the Kbuild changes in the diffstat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
Documentation: kvm: clarify KVM_SET_USER_MEMORY_REGION
KVM: doc: Document the life cycle of a VM and its resources
KVM: selftests: complete IO before migrating guest state
KVM: selftests: disable stack protector for all KVM tests
KVM: selftests: explicitly disable PIE for tests
KVM: selftests: assert on exit reason in CR4/cpuid sync test
KVM: x86: update %rip after emulating IO
x86/kvm/hyper-v: avoid spurious pending stimer on vCPU init
kvm/x86: Move MSR_IA32_ARCH_CAPABILITIES to array emulated_msrs
KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts
kvm: don't redefine flags as something else
kvm: mmu: Used range based flushing in slot_handle_level_range
KVM: export <linux/kvm_para.h> and <asm/kvm_para.h> iif KVM is supported
KVM: x86: remove check on nr_mmu_pages in kvm_arch_commit_memory_region()
kvm: nVMX: Add a vmentry check for HOST_SYSENTER_ESP and HOST_SYSENTER_EIP fields
KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)
KVM: Reject device ioctls from processes other than the VM's creator
KVM: doc: Fix incorrect word ordering regarding supported use of APIs
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size'
KVM: nVMX: Do not inherit quadrant and invalid for the root shadow EPT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A pile of x86 updates:
- Prevent exceeding he valid physical address space in the /dev/mem
limit checks.
- Move all header content inside the header guard to prevent compile
failures.
- Fix the bogus __percpu annotation in this_cpu_has() which makes
sparse very noisy.
- Disable switch jump tables completely when retpolines are enabled.
- Prevent leaking the trampoline address"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/realmode: Make set_real_mode_mem() static inline
x86/cpufeature: Fix __percpu annotation in this_cpu_has()
x86/mm: Don't exceed the valid physical address space
x86/retpolines: Disable switch jump tables when retpolines are enabled
x86/realmode: Don't leak the trampoline kernel address
x86/boot: Fix incorrect ifdeffery scope
x86/resctrl: Remove unused variable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fixes from Thomas Gleixner:
"Two SMT/hotplug related fixes:
- Prevent crash when HOTPLUG_CPU is disabled and the CPU bringup
aborts. This is triggered with the 'nosmt' command line option, but
can happen by any abort condition. As the real unplug code is not
compiled in, prevent the fail by keeping the CPU in zombie state.
- Enforce HOTPLUG_CPU for SMP on x86 to avoid the above situation
completely. With 'nosmt' being a popular option it's required to
unplug the half brought up sibling CPUs (due to the MCE wreckage)
completely"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Enforce CONFIG_HOTPLUG_CPU when SMP=y
cpu/hotplug: Prevent crash when CPU bringup fails on CONFIG_HOTPLUG_CPU=n
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Three non-regression fixes.
- Our optimised memcmp could read past the end of one of the buffers
and potentially trigger a page fault leading to an oops.
- Some of our code to read energy management data on PowerVM had an
endian bug leading to bogus results.
- When reporting a machine check exception we incorrectly reported
TLB multihits as D-Cache multhits due to a missing entry in the
array of causes.
Thanks to: Chandan Rajendra, Gautham R. Shenoy, Mahesh Salgaonkar,
Segher Boessenkool, Vaidyanathan Srinivasan"
* tag 'powerpc-5.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/mce: Fix misleading print for TLB mutlihit
powerpc/pseries/energy: Use OF accessor functions to read ibm,drc-indexes
powerpc/64: Fix memcmp reading past the end of src/dest
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Use memblock_alloc() instead of memblock_alloc_low() in
request_standard_resources(), the latter being limited to the low 4G
memory range on arm64"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: replace memblock_alloc_low with memblock_alloc
|
|
Remove the unused @size argument and move it into a header file, so it
can be inlined.
[ bp: Massage. ]
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-efi <linux-efi@vger.kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190328114233.27835-1-mcroce@redhat.com
|
|
On pseries, TLB multihit are reported as D-Cache Multihit. This is because
the wrongly populated mc_err_types[] array. Per PAPR, TLB error type is 0x04
and mc_err_types[4] points to "D-Cache" instead of "TLB" string. Fixup the
mc_err_types[] array.
Machine check error type per PAPR:
0x00 = Uncorrectable Memory Error (UE)
0x01 = SLB error
0x02 = ERAT Error
0x04 = TLB error
0x05 = D-Cache error
0x07 = I-Cache error
Fixes: 8f0b80561f21 ("powerpc/pseries: Display machine check error details.")
Cc: stable@vger.kernel.org # v4.20+
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/ARM fixes for 5.1
- Fix THP handling in the presence of pre-existing PTEs
- Honor request for PTE mappings even when THPs are available
- GICv4 performance improvement
- Take the srcu lock when writing to guest-controlled ITS data structures
- Reset the virtual PMU in preemptible context
- Various cleanups
|
|
Most (all?) x86 platforms provide a port IO based reset mechanism, e.g.
OUT 92h or CF9h. Userspace may emulate said mechanism, i.e. reset a
vCPU in response to KVM_EXIT_IO, without explicitly announcing to KVM
that it is doing a reset, e.g. Qemu jams vCPU state and resumes running.
To avoid corruping %rip after such a reset, commit 0967b7bf1c22 ("KVM:
Skip pio instruction when it is emulated, not executed") changed the
behavior of PIO handlers, i.e. today's "fast" PIO handling to skip the
instruction prior to exiting to userspace. Full emulation doesn't need
such tricks becase re-emulating the instruction will naturally handle
%rip being changed to point at the reset vector.
Updating %rip prior to executing to userspace has several drawbacks:
- Userspace sees the wrong %rip on the exit, e.g. if PIO emulation
fails it will likely yell about the wrong address.
- Single step exits to userspace for are effectively dropped as
KVM_EXIT_DEBUG is overwritten with KVM_EXIT_IO.
- Behavior of PIO emulation is different depending on whether it
goes down the fast path or the slow path.
Rather than skip the PIO instruction before exiting to userspace,
snapshot the linear %rip and cancel PIO completion if the current
value does not match the snapshot. For a 64-bit vCPU, i.e. the most
common scenario, the snapshot and comparison has negligible overhead
as VMCS.GUEST_RIP will be cached regardless, i.e. there is no extra
VMREAD in this case.
All other alternatives to snapshotting the linear %rip that don't
rely on an explicit reset announcenment suffer from one corner case
or another. For example, canceling PIO completion on any write to
%rip fails if userspace does a save/restore of %rip, and attempting to
avoid that issue by canceling PIO only if %rip changed then fails if PIO
collides with the reset %rip. Attempting to zero in on the exact reset
vector won't work for APs, which means adding more hooks such as the
vCPU's MP_STATE, and so on and so forth.
Checking for a linear %rip match technically suffers from corner cases,
e.g. userspace could theoretically rewrite the underlying code page and
expect a different instruction to execute, or the guest hardcodes a PIO
reset at 0xfffffff0, but those are far, far outside of what can be
considered normal operation.
Fixes: 432baf60eee3 ("KVM: VMX: use kvm_fast_pio_in for handling IN I/O")
Cc: <stable@vger.kernel.org>
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When userspace initializes guest vCPUs it may want to zero all supported
MSRs including Hyper-V related ones including HV_X64_MSR_STIMERn_CONFIG/
HV_X64_MSR_STIMERn_COUNT. With commit f3b138c5d89a ("kvm/x86: Update SynIC
timers on guest entry only") we began doing stimer_mark_pending()
unconditionally on every config change.
The issue I'm observing manifests itself as following:
- Qemu writes 0 to STIMERn_{CONFIG,COUNT} MSRs and marks all stimers as
pending in stimer_pending_bitmap, arms KVM_REQ_HV_STIMER;
- kvm_hv_has_stimer_pending() starts returning true;
- kvm_vcpu_has_events() starts returning true;
- kvm_arch_vcpu_runnable() starts returning true;
- when kvm_arch_vcpu_ioctl_run() gets into
(vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED) case:
- kvm_vcpu_block() gets in 'kvm_vcpu_check_block(vcpu) < 0' and returns
immediately, avoiding normal wait path;
- -EAGAIN is returned from kvm_arch_vcpu_ioctl_run() immediately forcing
userspace to retry.
So instead of normal wait path we get a busy loop on all secondary vCPUs
before they get INIT signal. This seems to be undesirable, especially given
that this happens even when Hyper-V extensions are not used.
Generally, it seems to be pointless to mark an stimer as pending in
stimer_pending_bitmap and arm KVM_REQ_HV_STIMER as the only thing
kvm_hv_process_stimers() will do is clear the corresponding bit. We may
just not mark disabled timers as pending instead.
Fixes: f3b138c5d89a ("kvm/x86: Update SynIC timers on guest entry only")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since MSR_IA32_ARCH_CAPABILITIES is emualted unconditionally even if
host doesn't suppot it. We should move it to array emulated_msrs from
arry msrs_to_save, to report to userspace that guest support this msr.
Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The CPUID flag ARCH_CAPABILITIES is unconditioinally exposed to host
userspace for all x86 hosts, i.e. KVM advertises ARCH_CAPABILITIES
regardless of hardware support under the pretense that KVM fully
emulates MSR_IA32_ARCH_CAPABILITIES. Unfortunately, only VMX hosts
handle accesses to MSR_IA32_ARCH_CAPABILITIES (despite KVM_GET_MSRS
also reporting MSR_IA32_ARCH_CAPABILITIES for all hosts).
Move the MSR_IA32_ARCH_CAPABILITIES handling to common x86 code so
that it's emulated on AMD hosts.
Fixes: 1eaafe91a0df4 ("kvm: x86: IA32_ARCH_CAPABILITIES is always supported")
Cc: stable@vger.kernel.org
Reported-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Replace kvm_flush_remote_tlbs with kvm_flush_remote_tlbs_with_address
in slot_handle_level_range. When range based flushes are not enabled
kvm_flush_remote_tlbs_with_address falls back to kvm_flush_remote_tlbs.
This changes the behavior of many functions that indirectly use
slot_handle_level_range, iff the range based flushes are enabled. The
only potential problem I see with this is that kvm->tlbs_dirty will be
cleared less often, however the only caller of slot_handle_level_range that
checks tlbs_dirty is kvm_mmu_notifier_invalidate_range_start which
checks it and does a kvm_flush_remote_tlbs after calling
kvm_unmap_hva_range anyway.
Tested: Ran all kvm-unit-tests on a Intel Haswell machine with and
without this patch. The patch introduced no new failures.
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
I do not see any consistency about headers_install of <linux/kvm_para.h>
and <asm/kvm_para.h>.
According to my analysis of Linux 5.1-rc1, there are 3 groups:
[1] Both <linux/kvm_para.h> and <asm/kvm_para.h> are exported
alpha, arm, hexagon, mips, powerpc, s390, sparc, x86
[2] <asm/kvm_para.h> is exported, but <linux/kvm_para.h> is not
arc, arm64, c6x, h8300, ia64, m68k, microblaze, nios2, openrisc,
parisc, sh, unicore32, xtensa
[3] Neither <linux/kvm_para.h> nor <asm/kvm_para.h> is exported
csky, nds32, riscv
This does not match to the actual KVM support. At least, [2] is
half-baked.
Nor do arch maintainers look like they care about this. For example,
commit 0add53713b1c ("microblaze: Add missing kvm_para.h to Kbuild")
exported <asm/kvm_para.h> to user-space in order to fix an in-kernel
build error.
We have two ways to make this consistent:
[A] export both <linux/kvm_para.h> and <asm/kvm_para.h> for all
architectures, irrespective of the KVM support
[B] Match the header export of <linux/kvm_para.h> and <asm/kvm_para.h>
to the KVM support
My first attempt was [A] because the code looks cleaner, but Paolo
suggested [B].
So, this commit goes with [B].
For most architectures, <asm/kvm_para.h> was moved to the kernel-space.
I changed include/uapi/linux/Kbuild so that it checks generated
asm/kvm_para.h as well as check-in ones.
After this commit, there will be two groups:
[1] Both <linux/kvm_para.h> and <asm/kvm_para.h> are exported
arm, arm64, mips, powerpc, s390, x86
[2] Neither <linux/kvm_para.h> nor <asm/kvm_para.h> is exported
alpha, arc, c6x, csky, h8300, hexagon, ia64, m68k, microblaze,
nds32, nios2, openrisc, parisc, riscv, sh, sparc, unicore32, xtensa
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
* nr_mmu_pages would be non-zero only if kvm->arch.n_requested_mmu_pages is
non-zero.
* nr_mmu_pages is always non-zero, since kvm_mmu_calculate_mmu_pages()
never return zero.
Based on these two reasons, we can merge the two *if* clause and use the
return value from kvm_mmu_calculate_mmu_pages() directly. This simplify
the code and also eliminate the possibility for reader to believe
nr_mmu_pages would be zero.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
fields
According to section "Checks on VMX Controls" in Intel SDM vol 3C, the
following check is performed on vmentry of L2 guests:
On processors that support Intel 64 architecture, the IA32_SYSENTER_ESP
field and the IA32_SYSENTER_EIP field must each contain a canonical
address.
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Errata#1096:
On a nested data page fault when CR.SMAP=1 and the guest data read
generates a SMAP violation, GuestInstrBytes field of the VMCB on a
VMEXIT will incorrectly return 0h instead the correct guest
instruction bytes .
Recommend Workaround:
To determine what instruction the guest was executing the hypervisor
will have to decode the instruction at the instruction pointer.
The recommended workaround can not be implemented for the SEV
guest because guest memory is encrypted with the guest specific key,
and instruction decoder will not be able to decode the instruction
bytes. If we hit this errata in the SEV guest then log the message
and request a guest shutdown.
Reported-by: Venkatesh Srinivas <venkateshs@google.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The cr4_pae flag is a bit of a misnomer, its purpose is really to track
whether the guest PTE that is being shadowed is a 4-byte entry or an
8-byte entry. Prior to supporting nested EPT, the size of the gpte was
reflected purely by CR4.PAE. KVM fudged things a bit for direct sptes,
but it was mostly harmless since the size of the gpte never mattered.
Now that a spte may be tracking an indirect EPT entry, relying on
CR4.PAE is wrong and ill-named.
For direct shadow pages, force the gpte_size to '1' as they are always
8-byte entries; EPT entries can only be 8-bytes and KVM always uses
8-byte entries for NPT and its identity map (when running with EPT but
not unrestricted guest).
Likewise, nested EPT entries are always 8-bytes. Nested EPT presents a
unique scenario as the size of the entries are not dictated by CR4.PAE,
but neither is the shadow page a direct map. To handle this scenario,
set cr0_wp=1 and smap_andnot_wp=1, an otherwise impossible combination,
to denote a nested EPT shadow page. Use the information to avoid
incorrectly zapping an unsync'd indirect page in __kvm_sync_page().
Providing a consistent and accurate gpte_size fixes a bug reported by
Vitaly where fast_cr3_switch() always fails when switching from L2 to
L1 as kvm_mmu_get_page() would force role.cr4_pae=0 for direct pages,
whereas kvm_calc_mmu_role_common() would set it according to CR4.PAE.
Fixes: 7dcd575520082 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed")
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly zero out quadrant and invalid instead of inheriting them from
the root_mmu. Functionally, this patch is a nop as we (should) never
set quadrant for a direct mapped (EPT) root_mmu and nested EPT is only
allowed if EPT is used for L1, and the root_mmu will never be invalid at
this point.
Explicitly setting flags sets the stage for repurposing the legacy
paging bits in role, e.g. nxe, cr0_wp, and sm{a,e}p_andnot_wp, at which
point 'smm' would be the only flag to be inherited from root_mmu.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently runtime PM is enabled for Tegra HDA driver. One of the concern
raised was about handling !PM case in HDA driver. In this case, there is
a need to manage clocks and power explicitly in the driver and reviewers
were not really convinced about this. The consensus at the end was to
enforce PM requirement to keep things simple, rather driver mentioning a
dependency on PM. This is how it is done for ARM 64-bit Tegra platforms
and the same can be done for 32-bit Tegra platforms too.
Finally the objective is to remove dependency on PM availability for all
Tegra drivers. The detailed discussion can be found in following patch,
https://patchwork.ozlabs.org/patch/1031007/
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
&cpu_info.x86_capability is __percpu, and the second argument of
x86_this_cpu_test_bit() is expected to be __percpu. Don't cast the
__percpu away and then implicitly add it again. This gets rid of 106
lines of sparse warnings with the kernel config I'm using.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190328154948.152273-1-jannh@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Improvements and bug fixes for 5.1-rc2:
- Fix early free of the channel program in vfio
- On AP device removal make sure that all messages are flushed with
the driver still attached that queued the message
- Limit brk randomization to 32MB to reduce the chance that the heap
of ld.so is placed after the main stack
- Add a rolling average for the steal time of a CPU, this will be
needed for KVM to decide when to do busy waiting
- Fix a warning in the CPU-MF code
- Add a notification handler for AP configuration change to react
faster to new AP devices"
* tag 's390-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Fix warning from check_processor_id
zcrypt: handle AP Info notification from CHSC SEI command
vfio: ccw: only free cp on final interrupt
s390/vtime: steal time exponential moving average
s390/zcrypt: revisit ap device remove procedure
s390: limit brk randomization to 32MB
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of minor fixes only for now
- fix for incorrect DMA channels on Renesas R-Car
- Broadcom bcm2835 error handling fixes
- Kconfig dependency fixes for bcm2835 and davinci
- CPU idle wakeup fix for i.MX6
- MMC regression on Tegra186
- fix incorrect phy settings on one imx board"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186
ARM: dts: nomadik: Fix polarity of SPI CS
ARM: davinci: fix build failure with allnoconfig
ARM: imx_v4_v5_defconfig: enable PWM driver
ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
ARM: dts: pfla02: increase phy reset duration
ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
ARM: imx51: fix a leaked reference by adding missing of_node_put
ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
arm64: bcm2835: Add missing dependency on MFD_CORE.
ARM: dts: bcm283x: Fix hdmi hpd gpio pull
soc: bcm: bcm2835-pm: Fix error paths of initialization.
soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels
arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels
|
|
valid_phys_addr_range() is used to sanity check the physical address range
of an operation, e.g., access to /dev/mem. It uses __pa(high_memory)
internally.
If memory is populated at the end of the physical address space, then
__pa(high_memory) is outside of the physical address space because:
high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
For the comparison in valid_phys_addr_range() this is not an issue, but if
CONFIG_DEBUG_VIRTUAL is enabled, __pa() maps to __phys_addr(), which
verifies that the resulting physical address is within the valid physical
address space of the CPU. So in the case that memory is populated at the
end of the physical address space, this is not true and triggers a
VIRTUAL_BUG_ON().
Use __pa(high_memory - 1) to prevent the conversion from going beyond
the end of valid physical addresses.
Fixes: be62a3204406 ("x86/mm: Limit mmap() of /dev/mem to valid physical addresses")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Craig Bergstrom <craigb@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Sean Young <sean@mess.org>
Link: https://lkml.kernel.org/r/20190326001817.15413-2-rcampbell@nvidia.com
|
|
Commit ce02ef06fcf7 ("x86, retpolines: Raise limit for generating indirect
calls from switch-case") raised the limit under retpolines to 20 switch
cases where gcc would only then start to emit jump tables, and therefore
effectively disabling the emission of slow indirect calls in this area.
After this has been brought to attention to gcc folks [0], Martin Liska
has then fixed gcc to align with clang by avoiding to generate switch jump
tables entirely under retpolines. This is taking effect in gcc starting
from stable version 8.4.0. Given kernel supports compilation with older
versions of gcc where the fix is not being available or backported anymore,
we need to keep the extra KBUILD_CFLAGS around for some time and generally
set the -fno-jump-tables to align with what more recent gcc is doing
automatically today.
More than 20 switch cases are not expected to be fast-path critical, but
it would still be good to align with gcc behavior for versions < 8.4.0 in
order to have consistency across supported gcc versions. vmlinux size is
slightly growing by 0.27% for older gcc. This flag is only set to work
around affected gcc, no change for clang.
[0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86952
Suggested-by: Martin Liska <mliska@suse.cz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Björn Töpel<bjorn.topel@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Link: https://lkml.kernel.org/r/20190325135620.14882-1-daniel@iogearbox.net
|
|
The SMT disable 'nosmt' command line argument is not working properly when
CONFIG_HOTPLUG_CPU is disabled. The teardown of the sibling CPUs which are
required to be brought up due to the MCE issues, cannot work. The CPUs are
then kept in a half dead state.
As the 'nosmt' functionality has become popular due to the speculative
hardware vulnerabilities, the half torn down state is not a proper solution
to the problem.
Enforce CONFIG_HOTPLUG_CPU=y when SMP is enabled so the full operation is
possible.
Reported-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Mukesh Ojha <mojha@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Micheal Kelley <michael.h.kelley@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190326163811.598166056@linutronix.de
|
|
Function __hw_perf_event_init() used a CPU variable without
ensuring CPU preemption has been disabled. This caused the
following warning in the kernel log:
[ 7.277085] BUG: using smp_processor_id() in preemptible
[00000000] code: cf-csdiag/1892
[ 7.277111] caller is cf_diag_event_init+0x13a/0x338
[ 7.277122] CPU: 10 PID: 1892 Comm: cf-csdiag Not tainted
5.0.0-20190318.rc0.git0.9e1a11e0f602.300.fc29.s390x+debug #1
[ 7.277131] Hardware name: IBM 2964 NC9 712 (LPAR)
[ 7.277139] Call Trace:
[ 7.277150] ([<000000000011385a>] show_stack+0x82/0xd0)
[ 7.277161] [<0000000000b7a71a>] dump_stack+0x92/0xd0
[ 7.277174] [<00000000007b7e9c>] check_preemption_disabled+0xe4/0x100
[ 7.277183] [<00000000001228aa>] cf_diag_event_init+0x13a/0x338
[ 7.277195] [<00000000002cf3aa>] perf_try_init_event+0x72/0xf0
[ 7.277204] [<00000000002d0bba>] perf_event_alloc+0x6fa/0xce0
[ 7.277214] [<00000000002dc4a8>] __s390x_sys_perf_event_open+0x398/0xd50
[ 7.277224] [<0000000000b9e8f0>] system_call+0xdc/0x2d8
[ 7.277233] 2 locks held by cf-csdiag/1892:
[ 7.277241] #0: 00000000976f5510 (&sig->cred_guard_mutex){+.+.},
at: __s390x_sys_perf_event_open+0xd2e/0xd50
[ 7.277257] #1: 00000000363b11bd (&pmus_srcu){....},
at: perf_event_alloc+0x52e/0xce0
The variable is now accessed in proper context. Use
get_cpu_var()/put_cpu_var() pair to disable
preemption during access.
As the hardware authorization settings apply to all CPUs, it
does not matter which CPU is used to check the authorization setting.
Remove the event->count assignment. It is not needed as function
perf_event_alloc() allocates memory for the event with kzalloc() and
thus count is already set to zero.
Fixes: fe5908bccc56 ("s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Pull networking fixes from David Miller:
"Fixes here and there, a couple new device IDs, as usual:
1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.
2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.
3) Fix documentation for some eBPF helpers, from Quentin Monnet.
4) Some UAPI bpf header sync with tools, also from Quentin Monnet.
5) Set descriptor ownership bit at the right time for jumbo frames in
stmmac driver, from Aaro Koskinen.
6) Set IFF_UP properly in tun driver, from Eric Dumazet.
7) Fix load/store doubleword instruction generation in powerpc eBPF
JIT, from Naveen N. Rao.
8) nla_nest_start() return value checks all over, from Kangjie Lu.
9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
merge window. From Marcelo Ricardo Leitner and Xin Long.
10) Fix memory corruption with large MTUs in stmmac, from Aaro
Koskinen.
11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
Dumazet.
12) Fix topology subscription cancellation in tipc, from Erik Hugne.
13) Memory leak in genetlink error path, from Yue Haibing.
14) Valid control actions properly in packet scheduler, from Davide
Caratti.
15) Even if we get EEXIST, we still need to rehash if a shrink was
delayed. From Herbert Xu.
16) Fix interrupt mask handling in interrupt handler of r8169, from
Heiner Kallweit.
17) Fix leak in ehea driver, from Wen Yang"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
dpaa2-eth: fix race condition with bql frame accounting
chelsio: use BUG() instead of BUG_ON(1)
net: devlink: skip info_get op call if it is not defined in dumpit
net: phy: bcm54xx: Encode link speed and activity into LEDs
tipc: change to check tipc_own_id to return in tipc_net_stop
net: usb: aqc111: Extend HWID table by QNAP device
net: sched: Kconfig: update reference link for PIE
net: dsa: qca8k: extend slave-bus implementations
net: dsa: qca8k: remove leftover phy accessors
dt-bindings: net: dsa: qca8k: support internal mdio-bus
dt-bindings: net: dsa: qca8k: fix example
net: phy: don't clear BMCR in genphy_soft_reset
bpf, libbpf: clarify bump in libbpf version info
bpf, libbpf: fix version info and add it to shared object
rxrpc: avoid clang -Wuninitialized warning
tipc: tipc clang warning
net: sched: fix cleanup NULL pointer exception in act_mirr
r8169: fix cable re-plugging issue
net: ethernet: ti: fix possible object reference leak
net: ibm: fix possible object reference leak
...
|
|
If we use "crashkernel=Y[@X]" and the start address is above 4G,
the arm64 kdump capture kernel may call memblock_alloc_low() failure
in request_standard_resources(). Replacing memblock_alloc_low() with
memblock_alloc().
[ 0.000000] MEMBLOCK configuration:
[ 0.000000] memory size = 0x0000000040650000 reserved size = 0x0000000004db7f39
[ 0.000000] memory.cnt = 0x6
[ 0.000000] memory[0x0] [0x00000000395f0000-0x000000003968ffff], 0x00000000000a0000 bytes on node 0 flags: 0x4
[ 0.000000] memory[0x1] [0x0000000039730000-0x000000003973ffff], 0x0000000000010000 bytes on node 0 flags: 0x4
[ 0.000000] memory[0x2] [0x0000000039780000-0x000000003986ffff], 0x00000000000f0000 bytes on node 0 flags: 0x4
[ 0.000000] memory[0x3] [0x0000000039890000-0x0000000039d0ffff], 0x0000000000480000 bytes on node 0 flags: 0x4
[ 0.000000] memory[0x4] [0x000000003ed00000-0x000000003ed2ffff], 0x0000000000030000 bytes on node 0 flags: 0x4
[ 0.000000] memory[0x5] [0x0000002040000000-0x000000207fffffff], 0x0000000040000000 bytes on node 0 flags: 0x0
[ 0.000000] reserved.cnt = 0x7
[ 0.000000] reserved[0x0] [0x0000002040080000-0x0000002041c4dfff], 0x0000000001bce000 bytes flags: 0x0
[ 0.000000] reserved[0x1] [0x0000002041c53000-0x0000002042c203f8], 0x0000000000fcd3f9 bytes flags: 0x0
[ 0.000000] reserved[0x2] [0x000000207da00000-0x000000207dbfffff], 0x0000000000200000 bytes flags: 0x0
[ 0.000000] reserved[0x3] [0x000000207ddef000-0x000000207fbfffff], 0x0000000001e11000 bytes flags: 0x0
[ 0.000000] reserved[0x4] [0x000000207fdf2b00-0x000000207fdfc03f], 0x0000000000009540 bytes flags: 0x0
[ 0.000000] reserved[0x5] [0x000000207fdfd000-0x000000207ffff3ff], 0x0000000000202400 bytes flags: 0x0
[ 0.000000] reserved[0x6] [0x000000207ffffe00-0x000000207fffffff], 0x0000000000000200 bytes flags: 0x0
[ 0.000000] Kernel panic - not syncing: request_standard_resources: Failed to allocate 384 bytes
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-next-20190321+ #4
[ 0.000000] Call trace:
[ 0.000000] dump_backtrace+0x0/0x188
[ 0.000000] show_stack+0x24/0x30
[ 0.000000] dump_stack+0xa8/0xcc
[ 0.000000] panic+0x14c/0x31c
[ 0.000000] setup_arch+0x2b0/0x5e0
[ 0.000000] start_kernel+0x90/0x52c
[ 0.000000] ---[ end Kernel panic - not syncing: request_standard_resources: Failed to allocate 384 bytes ]---
Link: https://www.spinics.net/lists/arm-kernel/msg715293.html
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Since commit
ad67b74d2469 ("printk: hash addresses printed with %p")
at boot "____ptrval____" is printed instead of the trampoline addresses:
Base memory trampoline at [(____ptrval____)] 99000 size 24576
Remove the print as we don't want to leak kernel addresses and this
statement is not needed anymore.
Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190326203046.20787-1-mcroce@redhat.com
|
|
The declarations related to immovable memory handling are out of the
BOOT_COMPRESSED_MISC_H #ifdef scope, wrap them inside.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Chao Fan <fanc.fnst@cn.fujitsu.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190304055546.18566-1-bhe@redhat.com
|
|
In cpu_to_drc_index() in the case when FW_FEATURE_DRC_INFO is absent,
we currently use of_read_property() to obtain the pointer to the array
corresponding to the property "ibm,drc-indexes". The elements of this
array are of type __be32, but are accessed without any conversion to
the OS-endianness, which is buggy on a Little Endian OS.
Fix this by using of_property_read_u32_index() accessor function to
safely read the elements of the array.
Fixes: e83636ac3334 ("pseries/drc-info: Search DRC properties for CPU indexes")
Cc: stable@vger.kernel.org # v4.16+
Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
[mpe: Make the WARN_ON a WARN_ON_ONCE so it's not retriggerable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Enabling CQE support on Tegra186 Jetson TX2 has introduced a regression
that is causing accesses to the file-system on the eMMC to fail. Errors
such as the following have been observed ...
mmc2: running CQE recovery
mmc2: mmc_select_hs400 failed, error -110
print_req_error: I/O error, dev mmcblk2, sector 8 flags 80700
mmc2: cqhci: CQE failed to exit halt state
For now disable CQE support for Tegra186 until this issue is resolved.
Fixes: dfd3cb6feb73 arm64: tegra: Add CQE Support for SDMMC4
Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.1:
- Correct phy mode setting of imx6dl-yapp4 board to fix a problem
caused by commit 5ecdd77c61c8 ("net: dsa: qca8k: disable delay
for RGMII mode").
- Add a missing of_node_put call to fix leaked reference detected by
coccinelle in imx51 machine code.
- Fix imx6q cpuidle driver bug which causes that CPU might not wake up
at expected time.
- Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix
transmission timeouts error seen on imx6qdl-phytec-pfla02 board.
- Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h.
- Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi.
- Correct pseudo PHY address of switch device for imx6dl-yapp4 board.
- Update PWM driver options in imx defconfig files due to the change
on driver part.
* tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v4_v5_defconfig: enable PWM driver
ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
ARM: dts: pfla02: increase phy reset duration
ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
ARM: imx51: fix a leaked reference by adding missing of_node_put
ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM/ARM64-based SoCs fixes for 5.1,
please pull the following:
- Eric provides fixes for the bcm2835-pm driver: added missing depends
on MFD_CORE for the ARM64 definition of ARCH_BCM2835, fixing error
paths on initialization and fixing the PM_IMAGE_PERI power domain
* tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux:
arm64: bcm2835: Add missing dependency on MFD_CORE.
soc: bcm: bcm2835-pm: Fix error paths of initialization.
soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.1, please pull the following:
- Helen fixes the HDMI hot-pug detect GPIO polarity for the Rasperry Pi
model B revision 2
* tag 'arm-soc/for-5.1/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Fix hdmi hpd gpio pull
|
|
The SPI DT bindings are for historical reasons a pitfall,
the ability to flag a GPIO line as active high/low with
the second cell flags was introduced later so the SPI
subsystem will only accept the bool flag spi-cs-high
to indicate that the line is active high.
It worked by mistake, but the mistake was corrected
in another commit.
The comment in the DTS file was also misleading: this
CS is indeed active high.
Fixes: cffbb02dafa3 ("ARM: dts: nomadik: Augment NHK15 panel setting")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes
Renesas ARM Based SoC Fixes for v5.1
R-Car Gen3 E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs:
* Correct SCIF5 DMA channels
* tag 'renesas-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels
arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels
|
|
allnoconfig build with just ARCH_DAVINCI enabled
fails because drivers/clk/davinci/* depends on
REGMAP being enabled.
Fix it by selecting REGMAP_MMIO when building in
DaVinci support.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Chandan reported that fstests' generic/026 test hit a crash:
BUG: Unable to handle kernel data access at 0xc00000062ac40000
Faulting instruction address: 0xc000000000092240
Oops: Kernel access of bad area, sig: 11 [#1]
LE SMP NR_CPUS=2048 DEBUG_PAGEALLOC NUMA pSeries
CPU: 0 PID: 27828 Comm: chacl Not tainted 5.0.0-rc2-next-20190115-00001-g6de6dba64dda #1
NIP: c000000000092240 LR: c00000000066a55c CTR: 0000000000000000
REGS: c00000062c0c3430 TRAP: 0300 Not tainted (5.0.0-rc2-next-20190115-00001-g6de6dba64dda)
MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 44000842 XER: 20000000
CFAR: 00007fff7f3108ac DAR: c00000062ac40000 DSISR: 40000000 IRQMASK: 0
GPR00: 0000000000000000 c00000062c0c36c0 c0000000017f4c00 c00000000121a660
GPR04: c00000062ac3fff9 0000000000000004 0000000000000020 00000000275b19c4
GPR08: 000000000000000c 46494c4500000000 5347495f41434c5f c0000000026073a0
GPR12: 0000000000000000 c0000000027a0000 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: c00000062ea70020 c00000062c0c38d0 0000000000000002 0000000000000002
GPR24: c00000062ac3ffe8 00000000275b19c4 0000000000000001 c00000062ac30000
GPR28: c00000062c0c38d0 c00000062ac30050 c00000062ac30058 0000000000000000
NIP memcmp+0x120/0x690
LR xfs_attr3_leaf_lookup_int+0x53c/0x5b0
Call Trace:
xfs_attr3_leaf_lookup_int+0x78/0x5b0 (unreliable)
xfs_da3_node_lookup_int+0x32c/0x5a0
xfs_attr_node_addname+0x170/0x6b0
xfs_attr_set+0x2ac/0x340
__xfs_set_acl+0xf0/0x230
xfs_set_acl+0xd0/0x160
set_posix_acl+0xc0/0x130
posix_acl_xattr_set+0x68/0x110
__vfs_setxattr+0xa4/0x110
__vfs_setxattr_noperm+0xac/0x240
vfs_setxattr+0x128/0x130
setxattr+0x248/0x600
path_setxattr+0x108/0x120
sys_setxattr+0x28/0x40
system_call+0x5c/0x70
Instruction dump:
7d201c28 7d402428 7c295040 38630008 38840008 408201f0 4200ffe8 2c050000
4182ff6c 20c50008 54c61838 7d201c28 <7d402428> 7d293436 7d4a3436 7c295040
The instruction dump decodes as:
subfic r6,r5,8
rlwinm r6,r6,3,0,28
ldbrx r9,0,r3
ldbrx r10,0,r4 <-
Which shows us doing an 8 byte load from c00000062ac3fff9, which
crosses the page boundary at c00000062ac40000 and faults.
It's not OK for memcmp to read past the end of the source or
destination buffers if that would cross a page boundary, because we
don't know that the next page is mapped.
As pointed out by Segher, we can read past the end of the source or
destination as long as we don't cross a 4K boundary, because that's
our minimum page size on all platforms.
The bug is in the code at the .Lcmp_rest_lt8bytes label. When we get
there we know that s1 is 8-byte aligned and we have at least 1 byte to
read, so a single 8-byte load won't read past the end of s1 and cross
a page boundary.
But we have to be more careful with s2. So check if it's within 8
bytes of a 4K boundary and if so go to the byte-by-byte loop.
Fixes: 2d9ee327adce ("powerpc/64: Align bytes before fall back to .Lshort in powerpc64 memcmp()")
Cc: stable@vger.kernel.org # v4.19+
Reported-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Tested-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Variable "struct rdt_resource *r" is set but not used. So remove it.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1552152584-26087-1-git-send-email-peng.hao2@zte.com.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes:
- Prevent potential NULL pointer dereferences in the HPET and HyperV
code
- Exclude the GART aperture from /proc/kcore to prevent kernel
crashes on access
- Use the correct macros for Cyrix I/O on Geode processors
- Remove yet another kernel address printk leak
- Announce microcode reload completion as requested by quite some
people. Microcode loading has become popular recently.
- Some 'Make Clang' happy fixlets
- A few cleanups for recently added code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/gart: Exclude GART aperture from kcore
x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
x86/mm/pti: Make local symbols static
x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors
x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
x86/microcode: Announce reload operation's completion
x86/hyperv: Prevent potential NULL pointer dereference
x86/hpet: Prevent potential NULL pointer dereference
x86/lib: Fix indentation issue, remove extra tab
x86/boot: Restrict header scope to make Clang happy
x86/mm: Don't leak kernel addresses
x86/cpufeature: Fix various quality problems in the <asm/cpu_device_hd.h> header
|
