summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2019-02-03Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds10-12/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A few updates for x86: - Fix an unintended sign extension issue in the fault handling code - Rename the new resource control config switch so it's less confusing - Avoid setting up EFI info in kexec when the EFI runtime is disabled. - Fix the microcode version check in the AMD microcode loader so it only loads higher version numbers and never downgrades - Set EFER.LME in the 32bit trampoline before returning to long mode to handle older AMD/KVM behaviour properly. - Add Darren and Andy as x86/platform reviewers" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Avoid confusion over the new X86_RESCTRL config x86/kexec: Don't setup EFI info if EFI runtime is not enabled x86/microcode/amd: Don't falsely trick the late loading mechanism MAINTAINERS: Add Andy and Darren as arch/x86/platform/ reviewers x86/fault: Fix sign-extend unintended sign extension x86/boot/compressed/64: Set EFER.LME=1 in 32-bit trampoline before returning to long mode x86/cpu: Add Atom Tremont (Jacobsville)
2019-02-03Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull cpu hotplug fixes from Thomas Gleixner: "Two fixes for the cpu hotplug machinery: - Replace the overly clever 'SMT disabled by BIOS' detection logic as it breaks KVM scenarios and prevents speculation control updates when the Hyperthreads are brought online late after boot. - Remove a redundant invocation of the speculation control update function" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVM x86/speculation: Remove redundant arch_smt_update() invocation
2019-02-02Merge tag 'riscv-for-linus-5.0-rc5' of ↵Linus Torvalds9-14/+30
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V fixes from Palmer Dabbelt: "This contains a handful of mostly-independent patches: - make our port respect TIF_NEED_RESCHED, which fixes CONFIG_PREEMPT=y kernels - fix double-put of OF nodes - fix a misspelling of target in our Kconfig - generic PCIe is enabled in our defconfig - fix our SBI early console to properly handle line endings - fix max_low_pfn being counted in PFNs - a change to TASK_UNMAPPED_BASE to match what other arches do This has passed my standard 'boot Fedora' flow" * tag 'riscv-for-linus-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: riscv: Adjust mmap base address at a third of task size riscv: fixup max_low_pfn with PFN_DOWN. tty/serial: use uart_console_write in the RISC-V SBL early console RISC-V: defconfig: Add CRYPTO_DEV_VIRTIO=y RISC-V: defconfig: Enable Generic PCIE by default RISC-V: defconfig: Move CONFIG_PCI{,E_XILINX} RISC-V: Kconfig: fix spelling mistake "traget" -> "target" RISC-V: asm/page.h: fix spelling mistake "CONFIG_64BITS" -> "CONFIG_64BIT" RISC-V: fix bad use of of_node_put RISC-V: Add _TIF_NEED_RESCHED check for kernel thread when CONFIG_PREEMPT=y
2019-02-02Merge branch 'akpm' (patches from Andrew)Linus Torvalds15-7/+11
Merge misc fixes from Andrew Morton: "24 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (24 commits) autofs: fix error return in autofs_fill_super() autofs: drop dentry reference only when it is never used fs/drop_caches.c: avoid softlockups in drop_pagecache_sb() mm: migrate: don't rely on __PageMovable() of newpage after unlocking it psi: clarify the Kconfig text for the default-disable option mm, memory_hotplug: __offline_pages fix wrong locking mm: hwpoison: use do_send_sig_info() instead of force_sig() kasan: mark file common so ftrace doesn't trace it init/Kconfig: fix grammar by moving a closing parenthesis lib/test_kmod.c: potential double free in error handling mm, oom: fix use-after-free in oom_kill_process mm/hotplug: invalid PFNs from pfn_to_online_page() mm,memory_hotplug: fix scan_movable_pages() for gigantic hugepages psi: fix aggregation idle shut-off mm, memory_hotplug: test_pages_in_a_zone do not pass the end of zone mm, memory_hotplug: is_mem_section_removable do not pass the end of a zone oom, oom_reaper: do not enqueue same task twice mm: migrate: make buffer_migrate_page_norefs() actually succeed kernel/exit.c: release ptraced tasks before zap_pid_ns_processes x86_64: increase stack size for KASAN_EXTRA ...
2019-02-02x86/resctrl: Avoid confusion over the new X86_RESCTRL configJohannes Weiner4-8/+8
"Resource Control" is a very broad term for this CPU feature, and a term that is also associated with containers, cgroups etc. This can easily cause confusion. Make the user prompt more specific. Match the config symbol name. [ bp: In the future, the corresponding ARM arch-specific code will be under ARM_CPU_RESCTRL and the arch-agnostic bits will be carved out under the CPU_RESCTRL umbrella symbol. ] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Babu Moger <Babu.Moger@amd.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morse <james.morse@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: linux-doc@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pu Wen <puwen@hygon.cn> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190130195621.GA30653@cmpxchg.org
2019-02-02Merge tag 'xtensa-20190201' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds10-26/+43
Pull xtensa fixes from Max Filippov: - fix ccount_timer_shutdown for secondary CPUs - fix secondary CPU initialization - fix secondary CPU reset vector clash with double exception vector - fix present CPUs when booting with 'maxcpus' parameter - limit possible CPUs by configured NR_CPUS - issue a warning if xtensa PIC is asked to retrigger anything other than software IRQ - fix masking/unmasking of the first two IRQs on xtensa MX PIC - fix typo in Kconfig description for user space unaligned access feature - fix Kconfig warning for selecting BUILTIN_DTB * tag 'xtensa-20190201' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: SMP: limit number of possible CPUs by NR_CPUS xtensa: rename BUILTIN_DTB to BUILTIN_DTB_SOURCE xtensa: Fix typo use space=>user space drivers/irqchip: xtensa-mx: fix mask and unmask drivers/irqchip: xtensa: add warning to irq_retrigger xtensa: SMP: mark each possible CPU as present xtensa: smp_lx200_defconfig: fix vectors clash xtensa: SMP: fix secondary CPU initialization xtensa: SMP: fix ccount_timer_shutdown
2019-02-02Merge tag 'arm64-fixes' of ↵Linus Torvalds5-5/+14
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Although we're still debugging a few minor arm64-specific issues in mainline, I didn't want to hold this lot up in the meantime. We've got an additional KASLR fix after the previous one wasn't quite complete, a fix for a performance regression when mapping executable pages into userspace and some fixes for kprobe blacklisting. All candidates for stable. Summary: - Fix module loading when KASLR is configured but disabled at runtime - Fix accidental IPI when mapping user executable pages - Ensure hyp-stub and KVM world switch code cannot be kprobed" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: hibernate: Clean the __hyp_text to PoC after resume arm64: hyp-stub: Forbid kprobing of the hyp-stub arm64: kprobe: Always blacklist the KVM world-switch code arm64: kaslr: ensure randomized quantities are clean also when kaslr is off arm64: Do not issue IPIs for user executable ptes
2019-02-02x86_64: increase stack size for KASAN_EXTRAQian Cai1-0/+4
If the kernel is configured with KASAN_EXTRA, the stack size is increasted significantly because this option sets "-fstack-reuse" to "none" in GCC [1]. As a result, it triggers stack overrun quite often with 32k stack size compiled using GCC 8. For example, this reproducer https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/madvise/madvise06.c triggers a "corrupted stack end detected inside scheduler" very reliably with CONFIG_SCHED_STACK_END_CHECK enabled. There are just too many functions that could have a large stack with KASAN_EXTRA due to large local variables that have been called over and over again without being able to reuse the stacks. Some noticiable ones are size 7648 shrink_page_list 3584 xfs_rmap_convert 3312 migrate_page_move_mapping 3312 dev_ethtool 3200 migrate_misplaced_transhuge_page 3168 copy_process There are other 49 functions are over 2k in size while compiling kernel with "-Wframe-larger-than=" even with a related minimal config on this machine. Hence, it is too much work to change Makefiles for each object to compile without "-fsanitize-address-use-after-scope" individually. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715#c23 Although there is a patch in GCC 9 to help the situation, GCC 9 probably won't be released in a few months and then it probably take another 6-month to 1-year for all major distros to include it as a default. Hence, the stack usage with KASAN_EXTRA can be revisited again in 2020 when GCC 9 is everywhere. Until then, this patch will help users avoid stack overrun. This has already been fixed for arm64 for the same reason via 6e8830674ea ("arm64: kasan: Increase stack size for KASAN_EXTRA"). Link: http://lkml.kernel.org/r/20190109215209.2903-1-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-02arch: unexport asm/shmparam.h for all architecturesMasahiro Yamada14-7/+7
Most architectures do not export shmparam.h to user-space. $ find arch -name shmparam.h | sort arch/alpha/include/asm/shmparam.h arch/arc/include/asm/shmparam.h arch/arm64/include/asm/shmparam.h arch/arm/include/asm/shmparam.h arch/csky/include/asm/shmparam.h arch/ia64/include/asm/shmparam.h arch/mips/include/asm/shmparam.h arch/nds32/include/asm/shmparam.h arch/nios2/include/asm/shmparam.h arch/parisc/include/asm/shmparam.h arch/powerpc/include/asm/shmparam.h arch/s390/include/asm/shmparam.h arch/sh/include/asm/shmparam.h arch/sparc/include/asm/shmparam.h arch/x86/include/asm/shmparam.h arch/xtensa/include/asm/shmparam.h Strangely, some users of the asm-generic wrapper export shmparam.h $ git grep 'generic-y += shmparam.h' arch/c6x/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/h8300/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/hexagon/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/m68k/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/microblaze/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/openrisc/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/riscv/include/asm/Kbuild:generic-y += shmparam.h arch/unicore32/include/uapi/asm/Kbuild:generic-y += shmparam.h The newly added riscv correctly creates the asm-generic wrapper in the kernel space, but the others (c6x, h8300, hexagon, m68k, microblaze, openrisc, unicore32) create the one in the uapi directory. Digging into the git history, now I guess fcc8487d477a ("uapi: export all headers under uapi directories") was the misconversion. Prior to that commit, no architecture exported to shmparam.h As its commit description said, that commit exported shmparam.h for c6x, h8300, hexagon, m68k, openrisc, unicore32. 83f0124ad81e ("microblaze: remove asm-generic wrapper headers") accidentally exported shmparam.h for microblaze. This commit unexports shmparam.h for those architectures. There is no more reason to export include/uapi/asm-generic/shmparam.h, so it has been moved to include/asm-generic/shmparam.h Link: http://lkml.kernel.org/r/1546904307-11124-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stafford Horne <shorne@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Mark Salter <msalter@redhat.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-01x86/kexec: Don't setup EFI info if EFI runtime is not enabledKairui Song1-0/+3
Kexec-ing a kernel with "efi=noruntime" on the first kernel's command line causes the following null pointer dereference: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] Call Trace: efi_runtime_map_copy+0x28/0x30 bzImage64_load+0x688/0x872 arch_kexec_kernel_image_load+0x6d/0x70 kimage_file_alloc_init+0x13e/0x220 __x64_sys_kexec_file_load+0x144/0x290 do_syscall_64+0x55/0x1a0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Just skip the EFI info setup if EFI runtime services are not enabled. [ bp: Massage commit message. ] Suggested-by: Dave Young <dyoung@redhat.com> Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: bhe@redhat.com Cc: David Howells <dhowells@redhat.com> Cc: erik.schmauss@intel.com Cc: fanc.fnst@cn.fujitsu.com Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: kexec@lists.infradead.org Cc: lenb@kernel.org Cc: linux-acpi@vger.kernel.org Cc: Philipp Rudo <prudo@linux.vnet.ibm.com> Cc: rafael.j.wysocki@intel.com Cc: robert.moore@intel.com Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Cc: Yannik Sembritzki <yannik@sembritzki.me> Link: https://lkml.kernel.org/r/20190118111310.29589-2-kasong@redhat.com
2019-02-01x86: explicitly align IO accesses in memcpy_{to,from}ioLinus Torvalds1-3/+30
In commit 170d13ca3a2f ("x86: re-introduce non-generic memcpy_{to,from}io") I made our copy from IO space use a separate copy routine rather than rely on the generic memcpy. I did that because our generic memory copy isn't actually well-defined when it comes to internal access ordering or alignment, and will in fact depend on various CPUID flags. In particular, the default memcpy() for a modern Intel CPU will generally be just a "rep movsb", which works reasonably well for medium-sized memory copies of regular RAM, since the CPU will turn it into fairly optimized microcode. However, for non-cached memory and IO, "rep movs" ends up being horrendously slow and will just do the architectural "one byte at a time" accesses implied by the movsb. At the other end of the spectrum, if you _don't_ end up using the "rep movsb" code, you'd likely fall back to the software copy, which does overlapping accesses for the tail, and may copy things backwards. Again, for regular memory that's fine, for IO memory not so much. The thinking was that clearly nobody really cared (because things worked), but some people had seen horrible performance due to the byte accesses, so let's just revert back to our long ago version that dod "rep movsl" for the bulk of the copy, and then fixed up the potentially last few bytes of the tail with "movsw/b". Interestingly (and perhaps not entirely surprisingly), while that was our original memory copy implementation, and had been used before for IO, in the meantime many new users of memcpy_*io() had come about. And while the access patterns for the memory copy weren't well-defined (so arguably _any_ access pattern should work), in practice the "rep movsb" case had been very common for the last several years. In particular Jarkko Sakkinen reported that the memcpy_*io() change resuled in weird errors from his Geminilake NUC TPM module. And it turns out that the TPM TCG accesses according to spec require that the accesses be (a) done strictly sequentially (b) be naturally aligned otherwise the TPM chip will abort the PCI transaction. And, in fact, the tpm_crb.c driver did this: memcpy_fromio(buf, priv->rsp, 6); ... memcpy_fromio(&buf[6], &priv->rsp[6], expected - 6); which really should never have worked in the first place, but back before commit 170d13ca3a2f it *happened* to work, because the memcpy_fromio() would be expanded to a regular memcpy, and (a) gcc would expand the first memcpy in-line, and turn it into a 4-byte and a 2-byte read, and they happened to be in the right order, and the alignment was right. (b) gcc would call "memcpy()" for the second one, and the machines that had this TPM chip also apparently ended up always having ERMS ("Enhanced REP MOVSB/STOSB instructions"), so we'd use the "rep movbs" for that copy. In other words, basically by pure luck, the code happened to use the right access sizes in the (two different!) memcpy() implementations to make it all work. But after commit 170d13ca3a2f, both of the memcpy_fromio() calls resulted in a call to the routine with the consistent memory accesses, and in both cases it started out transferring with 4-byte accesses. Which worked for the first copy, but resulted in the second copy doing a 32-bit read at an address that was only 2-byte aligned. Jarkko is actually fixing the fragile code in the TPM driver, but since this is an excellent example of why we absolutely must not use a generic memcpy for IO accesses, _and_ an IO-specific one really should strive to align the IO accesses, let's do exactly that. Side note: Jarkko also noted that the driver had been used on ARM platforms, and had worked. That was because on 32-bit ARM, memcpy_*io() ends up always doing byte accesses, and on 64-bit ARM it first does byte accesses to align to 8-byte boundaries, and then does 8-byte accesses for the bulk. So ARM actually worked by design, and the x86 case worked by pure luck. We *might* want to make x86-64 do the 8-byte case too. That should be a pretty straightforward extension, but let's do one thing at a time. And generally MMIO accesses aren't really all that performance-critical, as shown by the fact that for a long time we just did them a byte at a time, and very few people ever noticed. Reported-and-tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jerry Snitselaar <jsnitsel@redhat.com> Cc: David Laight <David.Laight@aculab.com> Fixes: 170d13ca3a2f ("x86: re-introduce non-generic memcpy_{to,from}io") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-01arm64: hibernate: Clean the __hyp_text to PoC after resumeJames Morse1-1/+3
During resume hibernate restores all physical memory. Any memory that is accessed with the MMU disabled needs to be cleaned to the PoC. KVMs __hyp_text was previously ommitted as it runs with the MMU enabled, but now that the hyp-stub is located in this section, we must clean __hyp_text too. This ensures secondary CPUs that come online after hibernate has finished resuming, and load KVM via the freshly written hyp-stub see the correct instructions. Signed-off-by: James Morse <james.morse@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-02-01arm64: hyp-stub: Forbid kprobing of the hyp-stubJames Morse1-0/+2
The hyp-stub is loaded by the kernel's early startup code at EL2 during boot, before KVM takes ownership later. The hyp-stub's text is part of the regular kernel text, meaning it can be kprobed. A breakpoint in the hyp-stub causes the CPU to spin in el2_sync_invalid. Add it to the __hyp_text. Signed-off-by: James Morse <james.morse@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-02-01arm64: kprobe: Always blacklist the KVM world-switch codeJames Morse1-3/+3
On systems with VHE the kernel and KVM's world-switch code run at the same exception level. Code that is only used on a VHE system does not need to be annotated as __hyp_text as it can reside anywhere in the kernel text. __hyp_text was also used to prevent kprobes from patching breakpoint instructions into this region, as this code runs at a different exception level. While this is no longer true with VHE, KVM still switches VBAR_EL1, meaning a kprobe's breakpoint executed in the world-switch code will cause a hyp-panic. Move the __hyp_text check in the kprobes blacklist so it applies on VHE systems too, to cover the common code and guest enter/exit assembly. Fixes: 888b3c8720e0 ("arm64: Treat all entry code as non-kprobe-able") Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-02-01arm64: kaslr: ensure randomized quantities are clean also when kaslr is offArd Biesheuvel1-0/+1
Commit 1598ecda7b23 ("arm64: kaslr: ensure randomized quantities are clean to the PoC") added cache maintenance to ensure that global variables set by the kaslr init routine are not wiped clean due to cache invalidation occurring during the second round of page table creation. However, if kaslr_early_init() exits early with no randomization being applied (either due to the lack of a seed, or because the user has disabled kaslr explicitly), no cache maintenance is performed, leading to the same issue we attempted to fix earlier, as far as the module_alloc_base variable is concerned. Note that module_alloc_base cannot be initialized statically, because that would cause it to be subject to a R_AARCH64_RELATIVE relocation, causing it to be overwritten by the second round of KASLR relocation processing. Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR") Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-02-01arm64: Do not issue IPIs for user executable ptesCatalin Marinas1-1/+5
Commit 3b8c9f1cdfc5 ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings") was aimed at fixing the I-cache invalidation for kernel mappings. However, it inadvertently caused all cache maintenance for user mappings via set_pte_at() -> __sync_icache_dcache() -> sync_icache_aliases() to call kick_all_cpus_sync(). Reported-by: Shijith Thotton <sthotton@marvell.com> Tested-by: Shijith Thotton <sthotton@marvell.com> Reported-by: Wandun Chen <chenwandun@huawei.com> Fixes: 3b8c9f1cdfc5 ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings") Cc: <stable@vger.kernel.org> # 4.19.x- Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-02-01Merge tag 'pci-v5.0-fixes-3' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Revert armada8k GPIO reset change that broke Macchiatobin booting (Baruch Siach) - Use actual size config reads on ARM cns3xxx (Koen Vandeputte) - Fix ARM cns3xxx config write alignment issue (Koen Vandeputte) - Fix imx6 PHY device link error checking (Leonard Crestez) - Fix imx6 probe failure on chips without separate PCI power domain (Leonard Crestez) * tag 'pci-v5.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: armada8k: Add support for gpio controlled reset signal" ARM: cns3xxx: Use actual size reads for PCIe ARM: cns3xxx: Fix writing to wrong PCI config registers after alignment PCI: imx: Fix checking pd_pcie_phy device link addition PCI: imx: Fix probe failure without power domain
2019-02-01ARM: cns3xxx: Use actual size reads for PCIeKoen Vandeputte1-1/+1
commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors") reimplemented cns3xxx_pci_read_config() using pci_generic_config_read32(), which preserved the property of only doing 32-bit reads. It also replaced cns3xxx_pci_write_config() with pci_generic_config_write(), so it changed writes from always being 32 bits to being the actual size, which works just fine. Given that: - The documentation does not mention that only 32 bit access is allowed. - Writes are already executed using the actual size - Extensive testing shows that 8b, 16b and 32b reads work as intended Allow read access of any size by replacing pci_generic_config_read32() with the pci_generic_config_read() accessors. Fixes: 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors") Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Acked-by: Arnd Bergmann <arnd@arndb.de> CC: Krzysztof Halasa <khalasa@piap.pl> CC: Olof Johansson <olof@lixom.net> CC: Robin Leblon <robin.leblon@ncentric.com> CC: Rob Herring <robh@kernel.org> CC: Russell King <linux@armlinux.org.uk> CC: Tim Harvey <tharvey@gateworks.com>
2019-02-01ARM: cns3xxx: Fix writing to wrong PCI config registers after alignmentKoen Vandeputte1-1/+1
Originally, cns3xxx used its own functions for mapping, reading and writing config registers. Commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors") removed the internal PCI config write function in favor of the generic one: cns3xxx_pci_write_config() --> pci_generic_config_write() cns3xxx_pci_write_config() expected aligned addresses, being produced by cns3xxx_pci_map_bus() while the generic one pci_generic_config_write() actually expects the real address as both the function and hardware are capable of byte-aligned writes. This currently leads to pci_generic_config_write() writing to the wrong registers. For instance, upon ath9k module loading: - driver ath9k gets loaded - The driver wants to write value 0xA8 to register PCI_LATENCY_TIMER, located at 0x0D - cns3xxx_pci_map_bus() aligns the address to 0x0C - pci_generic_config_write() effectively writes 0xA8 into register 0x0C (CACHE_LINE_SIZE) Fix the bug by removing the alignment in the cns3xxx mapping function. Fixes: 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Acked-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Arnd Bergmann <arnd@arndb.de> CC: stable@vger.kernel.org # v4.0+ CC: Bjorn Helgaas <bhelgaas@google.com> CC: Olof Johansson <olof@lixom.net> CC: Robin Leblon <robin.leblon@ncentric.com> CC: Rob Herring <robh@kernel.org> CC: Russell King <linux@armlinux.org.uk>
2019-01-31x86/microcode/amd: Don't falsely trick the late loading mechanismThomas Lendacky1-1/+1
The load_microcode_amd() function searches for microcode patches and attempts to apply a microcode patch if it is of different level than the currently installed level. While the processor won't actually load a level that is less than what is already installed, the logic wrongly returns UCODE_NEW thus signaling to its caller reload_store() that a late loading should be attempted. If the file-system contains an older microcode revision than what is currently running, such a late microcode reload can result in these misleading messages: x86/CPU: CPU features have changed after loading microcode, but might not take effect. x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update. These messages were issued on a system where SME/SEV are not enabled by the BIOS (MSR C001_0010[23] = 0b) because during boot, early_detect_mem_encrypt() is called and cleared the SME and SEV features in this case. However, after the wrong late load attempt, get_cpu_cap() is called and reloads the SME and SEV feature bits, resulting in the messages. Update the microcode level check to not attempt microcode loading if the current level is greater than(!) and not only equal to the current patch level. [ bp: massage commit message. ] Fixes: 2613f36ed965 ("x86/microcode: Attempt late loading only when new microcode is present") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/154894518427.9406.8246222496874202773.stgit@tlendack-t1.amdoffice.net
2019-01-30cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVMJosh Poimboeuf2-2/+3
With the following commit: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") ... the hotplug code attempted to detect when SMT was disabled by BIOS, in which case it reported SMT as permanently disabled. However, that code broke a virt hotplug scenario, where the guest is booted with only primary CPU threads, and a sibling is brought online later. The problem is that there doesn't seem to be a way to reliably distinguish between the HW "SMT disabled by BIOS" case and the virt "sibling not yet brought online" case. So the above-mentioned commit was a bit misguided, as it permanently disabled SMT for both cases, preventing future virt sibling hotplugs. Going back and reviewing the original problems which were attempted to be solved by that commit, when SMT was disabled in BIOS: 1) /sys/devices/system/cpu/smt/control showed "on" instead of "notsupported"; and 2) vmx_vm_init() was incorrectly showing the L1TF_MSG_SMT warning. I'd propose that we instead consider #1 above to not actually be a problem. Because, at least in the virt case, it's possible that SMT wasn't disabled by BIOS and a sibling thread could be brought online later. So it makes sense to just always default the smt control to "on" to allow for that possibility (assuming cpuid indicates that the CPU supports SMT). The real problem is #2, which has a simple fix: change vmx_vm_init() to query the actual current SMT state -- i.e., whether any siblings are currently online -- instead of looking at the SMT "control" sysfs value. So fix it by: a) reverting the original "fix" and its followup fix: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") bc2d8d262cba ("cpu/hotplug: Fix SMT supported evaluation") and b) changing vmx_vm_init() to query the actual current SMT state -- instead of the sysfs control value -- to determine whether the L1TF warning is needed. This also requires the 'sched_smt_present' variable to exported, instead of 'cpu_smt_control'. Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") Reported-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Joe Mario <jmario@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/e3a85d585da28cc333ecbc1e78ee9216e6da9396.1548794349.git.jpoimboe@redhat.com
2019-01-29x86/fault: Fix sign-extend unintended sign extensionColin Ian King1-1/+1
show_ldttss() shifts desc.base2 by 24 bit, but base2 is 8 bits of a bitfield in a u16. Due to the really great idea of integer promotion in C99 base2 is promoted to an int, because that's the standard defined behaviour when all values which can be represented by base2 fit into an int. Now if bit 7 is set in desc.base2 the result of the shift left by 24 makes the resulting integer negative and the following conversion to unsigned long legitmately sign extends first causing the upper bits 32 bits to be set in the result. Fix this by casting desc.base2 to unsigned long before the shift. Detected by CoverityScan, CID#1475635 ("Unintended sign extension") [ tglx: Reworded the changelog a bit as I actually had to lookup the standard (again) to decode the original one. ] Fixes: a1a371c468f7 ("x86/fault: Decode page fault OOPSes better") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: kernel-janitors@vger.kernel.org Link: https://lkml.kernel.org/r/20181222191116.21831-1-colin.king@canonical.com
2019-01-29x86/boot/compressed/64: Set EFER.LME=1 in 32-bit trampoline before returning ↵Wei Huang2-1/+9
to long mode In some old AMD KVM implementation, guest's EFER.LME bit is cleared by KVM when the hypervsior detects that the guest sets CR0.PG to 0. This causes the guest OS to reboot when it tries to return from 32-bit trampoline code because the CPU is in incorrect state: CR4.PAE=1, CR0.PG=1, CS.L=1, but EFER.LME=0. As a precaution, set EFER.LME=1 as part of long mode activation procedure. This extra step won't cause any harm when Linux is booted on a bare-metal machine. Signed-off-by: Wei Huang <wei@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: bp@alien8.de Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/20190104054411.12489-1-wei@redhat.com
2019-01-29x86/cpu: Add Atom Tremont (Jacobsville)Kan Liang1-1/+2
Add the Atom Tremont model number to the Intel family list. [ Tony: Also update comment at head of file to say "_X" suffix is also used for microserver parts. ] Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Megha Dey <megha.dey@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190125195902.17109-4-tony.luck@intel.com
2019-01-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds7-7/+30
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Fix the swapped outb() parameters in the KASLR code - Fix the PKEY handling at fork which missed to preserve the pkey state for the child. Comes with a test case to validate that. - Fix the entry stack handling for XEN PV to respect that XEN PV systems enter the function already on the current thread stack and not on the trampoline. - Fix kexec load failure caused by using a stale value when the kexec_buf structure is reused for subsequent allocations. - Fix a bogus sizeof() in the memory encryption code - Enforce PCI dependency for the Intel Low Power Subsystem - Enforce PCI_LOCKLESS_CONFIG when PCI is enabled" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled x86/entry/64/compat: Fix stack switching for XEN PV x86/kexec: Fix a kexec_file_load() failure x86/mm/mem_encrypt: Fix erroneous sizeof() x86/selftests/pkeys: Fork() to check for state being preserved x86/pkeys: Properly copy pkey state at fork() x86/kaslr: Fix incorrect i8254 outb() parameters x86/intel/lpss: Make PCI dependency explicit
2019-01-27Merge branch 'x86-timers-for-linus' of ↵Linus Torvalds2-18/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 timer fixes from Thomas Gleixner: "Two commits which were missed to be sent during the merge window. - The TSC calibration fix turns out to be more urgent as recent Skylake-X systems seem to have massive trouble with calibration disturbance. This should go back into stable for that reason and it the risk of breakage is rather low. - Drop an unused define" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hpet: Remove unused FSEC_PER_NSEC define x86/tsc: Make calibration refinement more robust
2019-01-27xtensa: SMP: limit number of possible CPUs by NR_CPUSMax Filippov1-0/+5
This fixes the following warning at boot when the kernel is booted on a board with more CPU cores than was configured in NR_CPUS: smp_init_cpus: Core Count = 8 smp_init_cpus: Core Id = 0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at include/linux/cpumask.h:121 smp_init_cpus+0x54/0x74 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc3-00015-g1459333f88a0 #124 Call Trace: __warn$part$3+0x6a/0x7c warn_slowpath_null+0x35/0x3c smp_init_cpus+0x54/0x74 setup_arch+0x1c0/0x1d0 start_kernel+0x44/0x310 _startup+0x107/0x107 Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-01-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds11-108/+122
Pull KVM fixes from Paolo Bonzini: "Quite a few fixes for x86: nested virtualization save/restore, AMD nested virtualization and virtual APIC, 32-bit fixes, an important fix to restore operation on older processors, and a bunch of hyper-v bugfixes. Several are marked stable. There are also fixes for GCC warnings and for a GCC/objtool interaction" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Mark expected switch fall-throughs KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search paths KVM: selftests: check returned evmcs version range x86/kvm/hyper-v: nested_enable_evmcs() sets vmcs_version incorrectly KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper function kvm: selftests: Fix region overlap check in kvm_util kvm: vmx: fix some -Wmissing-prototypes warnings KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1 svm: Fix AVIC incomplete IPI emulation svm: Add warning message for AVIC IPI invalid target KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error KVM: x86: Fix PV IPIs for 32-bit KVM host x86/kvm/hyper-v: recommend using eVMCS only when it is enabled x86/kvm/hyper-v: don't recommend doing reset via synthetic MSR kvm: x86/vmx: Use kzalloc for cached_vmcs12 KVM: VMX: Use the correct field var when clearing VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL KVM: x86: Fix single-step debugging x86/kvm/hyper-v: don't announce GUEST IDLE MSR support
2019-01-27Merge tag 'dma-mapping-5.0-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds4-6/+171
Pull dma-mapping fix from Christoph Hellwig: "Fix a xen-swiotlb regression on arm64" * tag 'dma-mapping-5.0-2' of git://git.infradead.org/users/hch/dma-mapping: arm64/xen: fix xen-swiotlb cache flushing
2019-01-26xtensa: rename BUILTIN_DTB to BUILTIN_DTB_SOURCECorentin Labbe7-9/+9
When building some xtensa config, I hit the following warning: drivers/staging/mt7621-dts/Kconfig:4:warning: 'BUILTIN_DTB' has wrong type. 'select' only accept arguments of bool and tristate type It is due to some arch use BUILTIN_DTB as a flag for the need to builtin dtb but xtensa use it as a string for which dtb to bulltin. But for this (which dtb to build), it is better to use BUILTIN_DTB_SOURCE like other arch do. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-01-26xtensa: Fix typo use space=>user spaceCorentin Labbe1-1/+1
This patch fix a simple typo. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-01-26xtensa: SMP: mark each possible CPU as presentMax Filippov1-1/+1
Otherwise it is impossible to enable CPUs after booting with 'maxcpus' parameter. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-01-26xtensa: smp_lx200_defconfig: fix vectors clashMax Filippov1-0/+1
Secondary CPU reset vector overlaps part of the double exception handler code, resulting in weird crashes and hangups when running user code. Move exception vectors one page up so that they don't clash with the secondary CPU reset vector. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-01-26xtensa: SMP: fix secondary CPU initializationMax Filippov2-14/+25
- add missing memory barriers to the secondary CPU synchronization spin loops; add comment to the matching memory barrier in the boot_secondary and __cpu_die functions; - use READ_ONCE/WRITE_ONCE to access cpu_start_id/cpu_start_ccount instead of reading/writing them directly; - re-initialize cpu_running every time before starting secondary CPU to flush possible previous CPU startup results. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-01-25riscv: Adjust mmap base address at a third of task sizeAlexandre Ghiti1-1/+1
This ratio is the most used among all other architectures and make icache_hygiene libhugetlbfs test pass: this test mmap lots of hugepages whose addresses, without this patch, reach the end of the process user address space. Signed-off-by: Alexandre Ghiti <aghiti@upmem.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-25KVM: x86: Mark expected switch fall-throughsGustavo A. R. Silva6-4/+10
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/x86/kvm/lapic.c:1037:27: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/x86/kvm/lapic.c:1876:3: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/x86/kvm/hyperv.c:1637:6: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/x86/kvm/svm.c:4396:6: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/x86/kvm/mmu.c:4372:36: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/x86/kvm/x86.c:3835:6: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/x86/kvm/x86.c:7938:23: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/x86/kvm/vmx/vmx.c:2015:6: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/x86/kvm/vmx/vmx.c:1773:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search pathsMasahiro Yamada2-5/+1
The header search path -I. in kernel Makefiles is very suspicious; it allows the compiler to search for headers in the top of $(srctree), where obviously no header file exists. The reason of having -I. here is to make the incorrectly set TRACE_INCLUDE_PATH working. As the comment block in include/trace/define_trace.h says, TRACE_INCLUDE_PATH should be a relative path to the define_trace.h Fix the TRACE_INCLUDE_PATH, and remove the iffy include paths. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25x86/kvm/hyper-v: nested_enable_evmcs() sets vmcs_version incorrectlyVitaly Kuznetsov1-3/+4
Commit e2e871ab2f02 ("x86/kvm/hyper-v: Introduce nested_get_evmcs_version() helper") broke EVMCS enablement: to set vmcs_version we now call nested_get_evmcs_version() but this function checks enlightened_vmcs_enabled flag which is not yet set so we end up returning zero. Fix the issue by re-arranging things in nested_enable_evmcs(). Fixes: e2e871ab2f02 ("x86/kvm/hyper-v: Introduce nested_get_evmcs_version() helper") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper functionSean Christopherson1-66/+73
...along with the function's STACK_FRAME_NON_STANDARD tag. Moving the asm blob results in a significantly smaller amount of code that is marked with STACK_FRAME_NON_STANDARD, which makes it far less likely that gcc will split the function and trigger a spurious objtool warning. As a bonus, removing STACK_FRAME_NON_STANDARD from vmx_vcpu_run() allows the bulk of code to be properly checked by objtool. Because %rbp is not loaded via VMCS fields, vmx_vcpu_run() must manually save/restore the host's RBP and load the guest's RBP prior to calling vmx_vmenter(). Modifying %rbp triggers objtool's stack validation code, and so vmx_vcpu_run() is tagged with STACK_FRAME_NON_STANDARD since it's impossible to avoid modifying %rbp. Unfortunately, vmx_vcpu_run() is also a gigantic function that gcc will split into separate functions, e.g. so that pieces of the function can be inlined. Splitting the function means that the compiled Elf file will contain one or more vmx_vcpu_run.part.* functions in addition to a vmx_vcpu_run function. Depending on where the function is split, objtool may warn about a "call without frame pointer save/setup" in vmx_vcpu_run.part.* since objtool's stack validation looks for exact names when whitelisting functions tagged with STACK_FRAME_NON_STANDARD. Up until recently, the undesirable function splitting was effectively blocked because vmx_vcpu_run() was tagged with __noclone. At the time, __noclone had an unintended side effect that put vmx_vcpu_run() into a separate optimization unit, which in turn prevented gcc from inlining the function (or any of its own function calls) and thus eliminated gcc's motivation to split the function. Removing the __noclone attribute allowed gcc to optimize vmx_vcpu_run(), exposing the objtool warning. Kudos to Qian Cai for root causing that the fnsplit optimization is what caused objtool to complain. Fixes: 453eafbe65f7 ("KVM: VMX: Move VM-Enter + VM-Exit handling to non-inline sub-routines") Tested-by: Qian Cai <cai@lca.pw> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25kvm: vmx: fix some -Wmissing-prototypes warningsYi Wang2-2/+2
We get some warnings when building kernel with W=1: arch/x86/kvm/vmx/vmx.c:426:5: warning: no previous prototype for ‘kvm_fill_hv_flush_list_func’ [-Wmissing-prototypes] arch/x86/kvm/vmx/nested.c:58:6: warning: no previous prototype for ‘init_vmcs_shadow_fields’ [-Wmissing-prototypes] Make them static to fix this. Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting ↵Vitaly Kuznetsov1-0/+8
to L1 kvm-unit-tests' eventinj "NMI failing on IDT" test results in NMI being delivered to the host (L1) when it's running nested. The problem seems to be: svm_complete_interrupts() raises 'nmi_injected' flag but later we decide to reflect EXIT_NPF to L1. The flag remains pending and we do NMI injection upon entry so it got delivered to L1 instead of L2. It seems that VMX code solves the same issue in prepare_vmcs12(), this was introduced with code refactoring in commit 5f3d5799974b ("KVM: nVMX: Rework event injection and recovery"). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25svm: Fix AVIC incomplete IPI emulationSuravee Suthikulpanit1-15/+4
In case of incomplete IPI with invalid interrupt type, the current SVM driver does not properly emulate the IPI, and fails to boot FreeBSD guests with multiple vcpus when enabling AVIC. Fix this by update APIC ICR high/low registers, which also emulate sending the IPI. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25svm: Add warning message for AVIC IPI invalid targetSuravee Suthikulpanit1-0/+2
Print warning message when IPI target ID is invalid due to one of the following reasons: * In logical mode: cluster > max_cluster (64) * In physical mode: target > max_physical (512) * Address is not present in the physical or logical ID tables Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal errorSean Christopherson1-2/+5
KVM hypercalls return a negative value error code in case of a fatal error, e.g. when the hypercall isn't supported or was made with invalid parameters. WARN_ONCE on fatal errors when sending PV IPIs as any such error all but guarantees an SMP system will hang due to a missing IPI. Fixes: aaffcfd1e82d ("KVM: X86: Implement PV IPIs in linux guest") Cc: stable@vger.kernel.org Cc: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25KVM: x86: Fix PV IPIs for 32-bit KVM hostSean Christopherson1-1/+1
The recognition of the KVM_HC_SEND_IPI hypercall was unintentionally wrapped in "#ifdef CONFIG_X86_64", causing 32-bit KVM hosts to reject any and all PV IPI requests despite advertising the feature. This results in all KVM paravirtualized guests hanging during SMP boot due to IPIs never being delivered. Fixes: 4180bf1b655a ("KVM: X86: Implement "send IPI" hypercall") Cc: stable@vger.kernel.org Cc: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25x86/kvm/hyper-v: recommend using eVMCS only when it is enabledVitaly Kuznetsov1-1/+2
We shouldn't probably be suggesting using Enlightened VMCS when it's not enabled (not supported from guest's point of view). Hyper-V on KVM seems to be fine either way but let's be consistent. Fixes: 2bc39970e932 ("x86/kvm/hyper-v: Introduce KVM_GET_SUPPORTED_HV_CPUID") Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25x86/kvm/hyper-v: don't recommend doing reset via synthetic MSRVitaly Kuznetsov1-1/+0
System reset through synthetic MSR is not recommended neither by genuine Hyper-V nor my QEMU. Fixes: 2bc39970e932 ("x86/kvm/hyper-v: Introduce KVM_GET_SUPPORTED_HV_CPUID") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25kvm: x86/vmx: Use kzalloc for cached_vmcs12Tom Roeder1-4/+8
This changes the allocation of cached_vmcs12 to use kzalloc instead of kmalloc. This removes the information leak found by Syzkaller (see Reported-by) in this case and prevents similar leaks from happening based on cached_vmcs12. It also changes vmx_get_nested_state to copy out the full 4k VMCS12_SIZE in copy_to_user rather than only the size of the struct. Tested: rebuilt against head, booted, and ran the syszkaller repro https://syzkaller.appspot.com/text?tag=ReproC&x=174efca3400000 without observing any problems. Reported-by: syzbot+ded1696f6b50b615b630@syzkaller.appspotmail.com Fixes: 8fcc4b5923af5de58b80b53a069453b135693304 Cc: stable@vger.kernel.org Signed-off-by: Tom Roeder <tmroeder@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25KVM: VMX: Use the correct field var when clearing ↵Sean Christopherson1-1/+1
VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL Fix a recently introduced bug that results in the wrong VMCS control field being updated when applying a IA32_PERF_GLOBAL_CTRL errata. Fixes: c73da3fcab43 ("KVM: VMX: Properly handle dynamic VM Entry/Exit controls") Reported-by: Harald Arnesen <harald@skogtun.org> Tested-by: Harald Arnesen <harald@skogtun.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25KVM: x86: Fix single-step debuggingAlexander Popov1-2/+1
The single-step debugging of KVM guests on x86 is broken: if we run gdb 'stepi' command at the breakpoint when the guest interrupts are enabled, RIP always jumps to native_apic_mem_write(). Then other nasty effects follow. Long investigation showed that on Jun 7, 2017 the commit c8401dda2f0a00cd25c0 ("KVM: x86: fix singlestepping over syscall") introduced the kvm_run.debug corruption: kvm_vcpu_do_singlestep() can be called without X86_EFLAGS_TF set. Let's fix it. Please consider that for -stable. Signed-off-by: Alexander Popov <alex.popov@linux.com> Cc: stable@vger.kernel.org Fixes: c8401dda2f0a00cd25c0 ("KVM: x86: fix singlestepping over syscall") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-15 03:11:13 +0300