| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for an __{get,put}_kernel_nofault to avoid an uninitialized
value causing spurious failures
- compat_vdso.so.dbg is now installed to the standard install location
- A fix to avoid initializing PERF_SAMPLE_BRANCH_*-related events, as
they aren't supported and will just later fail
- A fix to make AT_VECTOR_SIZE_ARCH correct now that we're providing
AT_MINSIGSTKSZ
- pgprot_nx() is now implemented, which fixes vmap W^X protection
- A fix for the vector save/restore code, which at least manifests as
corrupted vector state when a signal is taken
- A fix for a race condition in instruction patching
- A fix to avoid leaking the kernel-mode GP to userspace, which is a
kernel pointer leak that can be used to defeat KASLR in various ways
- A handful of smaller fixes to build warnings, an overzealous printk,
and some missing tracing annotations
* tag 'riscv-for-linus-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: process: Fix kernel gp leakage
riscv: Disable preemption when using patch_map()
riscv: Fix warning by declaring arch_cpu_idle() as noinstr
riscv: use KERN_INFO in do_trap
riscv: Fix vector state restore in rt_sigreturn()
riscv: mm: implement pgprot_nx
riscv: compat_vdso: align VDSOAS build log
RISC-V: Update AT_VECTOR_SIZE_ARCH for new AT_MINSIGSTKSZ
riscv: Mark __se_sys_* functions __used
drivers/perf: riscv: Disable PERF_SAMPLE_BRANCH_* while not supported
riscv: compat_vdso: install compat_vdso.so.dbg to /lib/modules/*/vdso/
riscv: hwprobe: do not produce frtace relocation
riscv: Fix spurious errors from __get/put_kernel_nofault
riscv: mm: Fix prototype to avoid discarding const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix missing NULL pointer check when determining guest/host fault
- Mark all functions in asm/atomic_ops.h, asm/atomic.h and
asm/preempt.h as __always_inline to avoid unwanted instrumentation
- Fix removal of a Processor Activity Instrumentation (PAI) sampling
event in PMU device driver
- Align system call table on 8 bytes
* tag 's390-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/entry: align system call table on 8 bytes
s390/pai: fix sampling event removal for PMU device driver
s390/preempt: mark all functions __always_inline
s390/atomic: mark all functions __always_inline
s390/mm: fix NULL pointer dereference
|
|
PAT handling won't do the right thing in COW mappings: the first PTE (or,
in fact, all PTEs) can be replaced during write faults to point at anon
folios. Reliably recovering the correct PFN and cachemode using
follow_phys() from PTEs will not work in COW mappings.
Using follow_phys(), we might just get the address+protection of the anon
folio (which is very wrong), or fail on swap/nonswap entries, failing
follow_phys() and triggering a WARN_ON_ONCE() in untrack_pfn() and
track_pfn_copy(), not properly calling free_pfn_range().
In free_pfn_range(), we either wouldn't call memtype_free() or would call
it with the wrong range, possibly leaking memory.
To fix that, let's update follow_phys() to refuse returning anon folios,
and fallback to using the stored PFN inside vma->vm_pgoff for COW mappings
if we run into that.
We will now properly handle untrack_pfn() with COW mappings, where we
don't need the cachemode. We'll have to fail fork()->track_pfn_copy() if
the first page was replaced by an anon folio, though: we'd have to store
the cachemode in the VMA to make this work, likely growing the VMA size.
For now, lets keep it simple and let track_pfn_copy() just fail in that
case: it would have failed in the past with swap/nonswap entries already,
and it would have done the wrong thing with anon folios.
Simple reproducer to trigger the WARN_ON_ONCE() in untrack_pfn():
<--- C reproducer --->
#include <stdio.h>
#include <sys/mman.h>
#include <unistd.h>
#include <liburing.h>
int main(void)
{
struct io_uring_params p = {};
int ring_fd;
size_t size;
char *map;
ring_fd = io_uring_setup(1, &p);
if (ring_fd < 0) {
perror("io_uring_setup");
return 1;
}
size = p.sq_off.array + p.sq_entries * sizeof(unsigned);
/* Map the submission queue ring MAP_PRIVATE */
map = mmap(0, size, PROT_READ | PROT_WRITE, MAP_PRIVATE,
ring_fd, IORING_OFF_SQ_RING);
if (map == MAP_FAILED) {
perror("mmap");
return 1;
}
/* We have at least one page. Let's COW it. */
*map = 0;
pause();
return 0;
}
<--- C reproducer --->
On a system with 16 GiB RAM and swap configured:
# ./iouring &
# memhog 16G
# killall iouring
[ 301.552930] ------------[ cut here ]------------
[ 301.553285] WARNING: CPU: 7 PID: 1402 at arch/x86/mm/pat/memtype.c:1060 untrack_pfn+0xf4/0x100
[ 301.553989] Modules linked in: binfmt_misc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_g
[ 301.558232] CPU: 7 PID: 1402 Comm: iouring Not tainted 6.7.5-100.fc38.x86_64 #1
[ 301.558772] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebu4
[ 301.559569] RIP: 0010:untrack_pfn+0xf4/0x100
[ 301.559893] Code: 75 c4 eb cf 48 8b 43 10 8b a8 e8 00 00 00 3b 6b 28 74 b8 48 8b 7b 30 e8 ea 1a f7 000
[ 301.561189] RSP: 0018:ffffba2c0377fab8 EFLAGS: 00010282
[ 301.561590] RAX: 00000000ffffffea RBX: ffff9208c8ce9cc0 RCX: 000000010455e047
[ 301.562105] RDX: 07fffffff0eb1e0a RSI: 0000000000000000 RDI: ffff9208c391d200
[ 301.562628] RBP: 0000000000000000 R08: ffffba2c0377fab8 R09: 0000000000000000
[ 301.563145] R10: ffff9208d2292d50 R11: 0000000000000002 R12: 00007fea890e0000
[ 301.563669] R13: 0000000000000000 R14: ffffba2c0377fc08 R15: 0000000000000000
[ 301.564186] FS: 0000000000000000(0000) GS:ffff920c2fbc0000(0000) knlGS:0000000000000000
[ 301.564773] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 301.565197] CR2: 00007fea88ee8a20 CR3: 00000001033a8000 CR4: 0000000000750ef0
[ 301.565725] PKRU: 55555554
[ 301.565944] Call Trace:
[ 301.566148] <TASK>
[ 301.566325] ? untrack_pfn+0xf4/0x100
[ 301.566618] ? __warn+0x81/0x130
[ 301.566876] ? untrack_pfn+0xf4/0x100
[ 301.567163] ? report_bug+0x171/0x1a0
[ 301.567466] ? handle_bug+0x3c/0x80
[ 301.567743] ? exc_invalid_op+0x17/0x70
[ 301.568038] ? asm_exc_invalid_op+0x1a/0x20
[ 301.568363] ? untrack_pfn+0xf4/0x100
[ 301.568660] ? untrack_pfn+0x65/0x100
[ 301.568947] unmap_single_vma+0xa6/0xe0
[ 301.569247] unmap_vmas+0xb5/0x190
[ 301.569532] exit_mmap+0xec/0x340
[ 301.569801] __mmput+0x3e/0x130
[ 301.570051] do_exit+0x305/0xaf0
...
Link: https://lkml.kernel.org/r/20240403212131.929421-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Wupeng Ma <mawupeng1@huawei.com>
Closes: https://lkml.kernel.org/r/20240227122814.3781907-1-mawupeng1@huawei.com
Fixes: b1a86e15dc03 ("x86, pat: remove the dependency on 'vm_pgoff' in track/untrack pfn vma routines")
Fixes: 5899329b1910 ("x86: PAT: implement track/untrack of pfnmap regions for x86 - v3")
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add CPUID_LNX_5 to track cpufeatures' word 21, and add the appropriate
compile-time assert in KVM to prevent direct lookups on the features in
CPUID_LNX_5. KVM uses X86_FEATURE_* flags to manage guest CPUID, and so
must translate features that are scattered by Linux from the Linux-defined
bit to the hardware-defined bit, i.e. should never try to directly access
scattered features in guest CPUID.
Opportunistically add NR_CPUID_WORDS to enum cpuid_leafs, along with a
compile-time assert in KVM's CPUID infrastructure to ensure that future
additions update cpuid_leafs along with NCAPINTS.
No functional change intended.
Fixes: 7f274e609f3d ("x86/cpufeatures: Add new word for scattered features")
Cc: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bluetooth and bpf.
Fairly usual collection of driver and core fixes. The large selftest
accompanying one of the fixes is also becoming a common occurrence.
Current release - regressions:
- ipv6: fix infinite recursion in fib6_dump_done()
- net/rds: fix possible null-deref in newly added error path
Current release - new code bugs:
- net: do not consume a full cacheline for system_page_pool
- bpf: fix bpf_arena-related file descriptor leaks in the verifier
- drv: ice: fix freeing uninitialized pointers, fixing misuse of the
newfangled __free() auto-cleanup
Previous releases - regressions:
- x86/bpf: fixes the BPF JIT with retbleed=stuff
- xen-netfront: add missing skb_mark_for_recycle, fix page pool
accounting leaks, revealed by recently added explicit warning
- tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6
non-wildcard addresses
- Bluetooth:
- replace "hci_qca: Set BDA quirk bit if fwnode exists in DT" with
better workarounds to un-break some buggy Qualcomm devices
- set conn encrypted before conn establishes, fix re-connecting to
some headsets which use slightly unusual sequence of msgs
- mptcp:
- prevent BPF accessing lowat from a subflow socket
- don't account accept() of non-MPC client as fallback to TCP
- drv: mana: fix Rx DMA datasize and skb_over_panic
- drv: i40e: fix VF MAC filter removal
Previous releases - always broken:
- gro: various fixes related to UDP tunnels - netns crossing
problems, incorrect checksum conversions, and incorrect packet
transformations which may lead to panics
- bpf: support deferring bpf_link dealloc to after RCU grace period
- nf_tables:
- release batch on table validation from abort path
- release mutex after nft_gc_seq_end from abort path
- flush pending destroy work before exit_net release
- drv: r8169: skip DASH fw status checks when DASH is disabled"
* tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: validate user input for expected length
net/sched: act_skbmod: prevent kernel-infoleak
net: usb: ax88179_178a: avoid the interface always configured as random address
net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45()
net: ravb: Always update error counters
net: ravb: Always process TX descriptor ring
netfilter: nf_tables: discard table flag update with pending basechain deletion
netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
netfilter: nf_tables: reject new basechain after table flag update
netfilter: nf_tables: flush pending destroy work before exit_net release
netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
netfilter: nf_tables: release batch on table validation from abort path
Revert "tg3: Remove residual error handling in tg3_suspend"
tg3: Remove residual error handling in tg3_suspend
net: mana: Fix Rx DMA datasize and skb_over_panic
net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()
net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestamping
net: stmmac: fix rx queue priority assignment
net: txgbe: fix i2c dev name cannot match clkdev
net: fec: Set mac_managed_pm during probe
...
|
|
childregs represents the registers which are active for the new thread
in user context. For a kernel thread, childregs->gp is never used since
the kernel gp is not touched by switch_to. For a user mode helper, the
gp value can be observed in user space after execve or possibly by other
means.
[From the email thread]
The /* Kernel thread */ comment is somewhat inaccurate in that it is also used
for user_mode_helper threads, which exec a user process, e.g. /sbin/init or
when /proc/sys/kernel/core_pattern is a pipe. Such threads do not have
PF_KTHREAD set and are valid targets for ptrace etc. even before they exec.
childregs is the *user* context during syscall execution and it is observable
from userspace in at least five ways:
1. kernel_execve does not currently clear integer registers, so the starting
register state for PID 1 and other user processes started by the kernel has
sp = user stack, gp = kernel __global_pointer$, all other integer registers
zeroed by the memset in the patch comment.
This is a bug in its own right, but I'm unwilling to bet that it is the only
way to exploit the issue addressed by this patch.
2. ptrace(PTRACE_GETREGSET): you can PTRACE_ATTACH to a user_mode_helper thread
before it execs, but ptrace requires SIGSTOP to be delivered which can only
happen at user/kernel boundaries.
3. /proc/*/task/*/syscall: this is perfectly happy to read pt_regs for
user_mode_helpers before the exec completes, but gp is not one of the
registers it returns.
4. PERF_SAMPLE_REGS_USER: LOCKDOWN_PERF normally prevents access to kernel
addresses via PERF_SAMPLE_REGS_INTR, but due to this bug kernel addresses
are also exposed via PERF_SAMPLE_REGS_USER which is permitted under
LOCKDOWN_PERF. I have not attempted to write exploit code.
5. Much of the tracing infrastructure allows access to user registers. I have
not attempted to determine which forms of tracing allow access to user
registers without already allowing access to kernel registers.
Fixes: 7db91e57a0ac ("RISC-V: Task implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan O'Rear <sorear@fastmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240327061258.2370291-1-sorear@fastmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
patch_map() uses fixmap mappings to circumvent the non-writability of
the kernel text mapping.
The __set_fixmap() function only flushes the current cpu tlb, it does
not emit an IPI so we must make sure that while we use a fixmap mapping,
the current task is not migrated on another cpu which could miss the
newly introduced fixmap mapping.
So in order to avoid any task migration, disable the preemption.
Reported-by: Andrea Parri <andrea@rivosinc.com>
Closes: https://lore.kernel.org/all/ZcS+GAaM25LXsBOl@andrea/
Reported-by: Andy Chiu <andy.chiu@sifive.com>
Closes: https://lore.kernel.org/linux-riscv/CABgGipUMz3Sffu-CkmeUB1dKVwVQ73+7=sgC45-m0AE9RCjOZg@mail.gmail.com/
Fixes: cad539baa48f ("riscv: implement a memset like function for text")
Fixes: 0ff7c3b33127 ("riscv: Use text_mutex instead of patch_lock")
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240326203017.310422-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The following warning appears when using ftrace:
[89855.443413] RCU not on for: arch_cpu_idle+0x0/0x1c
[89855.445640] WARNING: CPU: 5 PID: 0 at include/linux/trace_recursion.h:162 arch_ftrace_ops_list_func+0x208/0x228
[89855.445824] Modules linked in: xt_conntrack(E) nft_chain_nat(E) xt_MASQUERADE(E) nf_conntrack_netlink(E) xt_addrtype(E) nft_compat(E) nf_tables(E) nfnetlink(E) br_netfilter(E) cfg80211(E) nls_iso8859_1(E) ofpart(E) redboot(E) cmdlinepart(E) cfi_cmdset_0001(E) virtio_net(E) cfi_probe(E) cfi_util(E) 9pnet_virtio(E) gen_probe(E) net_failover(E) virtio_rng(E) failover(E) 9pnet(E) physmap(E) map_funcs(E) chipreg(E) mtd(E) uio_pdrv_genirq(E) uio(E) dm_multipath(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) drm(E) efi_pstore(E) backlight(E) ip_tables(E) x_tables(E) raid10(E) raid456(E) async_raid6_recov(E) async_memcpy(E) async_pq(E) async_xor(E) xor(E) async_tx(E) raid6_pq(E) raid1(E) raid0(E) virtio_blk(E)
[89855.451563] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G E 6.8.0-rc6ubuntu-defconfig #2
[89855.451726] Hardware name: riscv-virtio,qemu (DT)
[89855.451899] epc : arch_ftrace_ops_list_func+0x208/0x228
[89855.452016] ra : arch_ftrace_ops_list_func+0x208/0x228
[89855.452119] epc : ffffffff8016b216 ra : ffffffff8016b216 sp : ffffaf808090fdb0
[89855.452171] gp : ffffffff827c7680 tp : ffffaf808089ad40 t0 : ffffffff800c0dd8
[89855.452216] t1 : 0000000000000001 t2 : 0000000000000000 s0 : ffffaf808090fe30
[89855.452306] s1 : 0000000000000000 a0 : 0000000000000026 a1 : ffffffff82cd6ac8
[89855.452423] a2 : ffffffff800458c8 a3 : ffffaf80b1870640 a4 : 0000000000000000
[89855.452646] a5 : 0000000000000000 a6 : 00000000ffffffff a7 : ffffffffffffffff
[89855.452698] s2 : ffffffff82766872 s3 : ffffffff80004caa s4 : ffffffff80ebea90
[89855.452743] s5 : ffffaf808089bd40 s6 : 8000000a00006e00 s7 : 0000000000000008
[89855.452787] s8 : 0000000000002000 s9 : 0000000080043700 s10: 0000000000000000
[89855.452831] s11: 0000000000000000 t3 : 0000000000100000 t4 : 0000000000000064
[89855.452874] t5 : 000000000000000c t6 : ffffaf80b182dbfc
[89855.452929] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[89855.453053] [<ffffffff8016b216>] arch_ftrace_ops_list_func+0x208/0x228
[89855.453191] [<ffffffff8000e082>] ftrace_call+0x8/0x22
[89855.453265] [<ffffffff800a149c>] do_idle+0x24c/0x2ca
[89855.453357] [<ffffffff8000da54>] return_to_handler+0x0/0x26
[89855.453429] [<ffffffff8000b716>] smp_callin+0x92/0xb6
[89855.453785] ---[ end trace 0000000000000000 ]---
To fix this, mark arch_cpu_idle() as noinstr, like it is done in commit
a9cbc1b471d2 ("s390/idle: mark arch_cpu_idle() noinstr").
Reported-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Closes: https://lore.kernel.org/linux-riscv/51f21b87-ebed-4411-afbc-c00d3dea2bab@yadro.com/
Fixes: cfbc4f81c9d0 ("riscv: Select ARCH_WANTS_NO_INSTR")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Tested-by: Andy Chiu <andy.chiu@sifive.com>
Acked-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240326203017.310422-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Print the instruction dump with info instead of emergency level. The
unhandled signal message is only for informational purpose.
Fixes: b8a03a634129 ("riscv: add userland instruction dump to RISC-V splats")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/mvmy1aegrhm.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-04-04
We've added 7 non-merge commits during the last 5 day(s) which contain
a total of 9 files changed, 75 insertions(+), 24 deletions(-).
The main changes are:
1) Fix x86 BPF JIT under retbleed=stuff which causes kernel panics due to
incorrect destination IP calculation and incorrect IP for relocations,
from Uros Bizjak and Joan Bruguera Micó.
2) Fix BPF arena file descriptor leaks in the verifier,
from Anton Protopopov.
3) Defer bpf_link deallocation to after RCU grace period as currently
running multi-{kprobes,uprobes} programs might still access cookie
information from the link, from Andrii Nakryiko.
4) Fix a BPF sockmap lock inversion deadlock in map_delete_elem reported
by syzkaller, from Jakub Sitnicki.
5) Fix resolve_btfids build with musl libc due to missing linux/types.h
include, from Natanael Copa.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Prevent lock inversion deadlock in map delete elem
x86/bpf: Fix IP for relocating call depth accounting
x86/bpf: Fix IP after emitting call depth accounting
bpf: fix possible file descriptor leaks in verifier
tools/resolve_btfids: fix build with musl libc
bpf: support deferring bpf_link dealloc to after RCU grace period
bpf: put uprobe link's path and task in release callback
====================
Link: https://lore.kernel.org/r/20240404183258.4401-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Modifying a MCA bank's MCA_CTL bits which control which error types to
be reported is done over
/sys/devices/system/machinecheck/
├── machinecheck0
│ ├── bank0
│ ├── bank1
│ ├── bank10
│ ├── bank11
...
sysfs nodes by writing the new bit mask of events to enable.
When the write is accepted, the kernel deletes all current timers and
reinits all banks.
Doing that in parallel can lead to initializing a timer which is already
armed and in the timer wheel, i.e., in use already:
ODEBUG: init active (active state 0) object: ffff888063a28000 object
type: timer_list hint: mce_timer_fn+0x0/0x240 arch/x86/kernel/cpu/mce/core.c:2642
WARNING: CPU: 0 PID: 8120 at lib/debugobjects.c:514
debug_print_object+0x1a0/0x2a0 lib/debugobjects.c:514
Fix that by grabbing the sysfs mutex as the rest of the MCA sysfs code
does.
Reported by: Yue Sun <samsun1006219@gmail.com>
Reported by: xingwei lee <xrivendell7@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/CAEkJfYNiENwQY8yV1LYJ9LjJs%2Bx_-PqMv98gKig55=2vbzffRw@mail.gmail.com
|
|
The host SNP worthiness can determined later, after alternatives have
been patched, in snp_rmptable_init() depending on cmdline options like
iommu=pt which is incompatible with SNP, for example.
Which means that one cannot use X86_FEATURE_SEV_SNP and will need to
have a special flag for that control.
Use that newly added CC_ATTR_HOST_SEV_SNP in the appropriate places.
Move kdump_sev_callback() to its rightful place, while at it.
Fixes: 216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Link: https://lore.kernel.org/r/20240327154317.29909-6-bp@alien8.de
|
|
Add functionality to set and/or clear different attributes of the
machine as a confidential computing platform. Add the first one too:
whether the machine is running as a host for SEV-SNP guests.
Fixes: 216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Link: https://lore.kernel.org/r/20240327154317.29909-5-bp@alien8.de
|
|
The functionality to load SEV-SNP guests by the host will soon rely on
cc_platform* helpers because the cpu_feature* API with the early
patching is insufficient when SNP support needs to be disabled late.
Therefore, pull that functionality in.
Fixes: 216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Link: https://lore.kernel.org/r/20240327154317.29909-4-bp@alien8.de
|
|
There are few uses of CoCo that don't rely on working cryptography and
hence a working RNG. Unfortunately, the CoCo threat model means that the
VM host cannot be trusted and may actively work against guests to
extract secrets or manipulate computation. Since a malicious host can
modify or observe nearly all inputs to guests, the only remaining source
of entropy for CoCo guests is RDRAND.
If RDRAND is broken -- due to CPU hardware fault -- the RNG as a whole
is meant to gracefully continue on gathering entropy from other sources,
but since there aren't other sources on CoCo, this is catastrophic.
This is mostly a concern at boot time when initially seeding the RNG, as
after that the consequences of a broken RDRAND are much more
theoretical.
So, try at boot to seed the RNG using 256 bits of RDRAND output. If this
fails, panic(). This will also trigger if the system is booted without
RDRAND, as RDRAND is essential for a safe CoCo boot.
Add this deliberately to be "just a CoCo x86 driver feature" and not
part of the RNG itself. Many device drivers and platforms have some
desire to contribute something to the RNG, and add_device_randomness()
is specifically meant for this purpose.
Any driver can call it with seed data of any quality, or even garbage
quality, and it can only possibly make the quality of the RNG better or
have no effect, but can never make it worse.
Rather than trying to build something into the core of the RNG, consider
the particular CoCo issue just a CoCo issue, and therefore separate it
all out into driver (well, arch/platform) code.
[ bp: Massage commit message. ]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Elena Reshetova <elena.reshetova@intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240326160735.73531-1-Jason@zx2c4.com
|
|
The __vmalloc_start_set declaration is in a header that is not included
in numa_32.c in current linux-next:
arch/x86/mm/numa_32.c: In function 'initmem_init':
arch/x86/mm/numa_32.c:57:9: error: '__vmalloc_start_set' undeclared (first use in this function)
57 | __vmalloc_start_set = true;
| ^~~~~~~~~~~~~~~~~~~
arch/x86/mm/numa_32.c:57:9: note: each undeclared identifier is reported only once for each function it appears in
Add an explicit #include.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240403202344.3463169-1-arnd@kernel.org
|
|
The RISC-V Vector specification states in "Appendix D: Calling
Convention for Vector State" [1] that "Executing a system call causes
all caller-saved vector registers (v0-v31, vl, vtype) and vstart to
become unspecified.". In the RISC-V kernel this is called "discarding
the vstate".
Returning from a signal handler via the rt_sigreturn() syscall, vector
discard is also performed. However, this is not an issue since the
vector state should be restored from the sigcontext, and therefore not
care about the vector discard.
The "live state" is the actual vector register in the running context,
and the "vstate" is the vector state of the task. A dirty live state,
means that the vstate and live state are not in synch.
When vectorized user_from_copy() was introduced, an bug sneaked in at
the restoration code, related to the discard of the live state.
An example when this go wrong:
1. A userland application is executing vector code
2. The application receives a signal, and the signal handler is
entered.
3. The application returns from the signal handler, using the
rt_sigreturn() syscall.
4. The live vector state is discarded upon entering the
rt_sigreturn(), and the live state is marked as "dirty", indicating
that the live state need to be synchronized with the current
vstate.
5. rt_sigreturn() restores the vstate, except the Vector registers,
from the sigcontext
6. rt_sigreturn() restores the Vector registers, from the sigcontext,
and now the vectorized user_from_copy() is used. The dirty live
state from the discard is saved to the vstate, making the vstate
corrupt.
7. rt_sigreturn() returns to the application, which crashes due to
corrupted vstate.
Note that the vectorized user_from_copy() is invoked depending on the
value of CONFIG_RISCV_ISA_V_UCOPY_THRESHOLD. Default is 768, which
means that vlen has to be larger than 128b for this bug to trigger.
The fix is simply to mark the live state as non-dirty/clean prior
performing the vstate restore.
Link: https://github.com/riscv/riscv-isa-manual/releases/download/riscv-isa-release-8abdb41-2024-03-26/unpriv-isa-asciidoc.pdf # [1]
Reported-by: Charlie Jenkins <charlie@rivosinc.com>
Reported-by: Vineet Gupta <vgupta@kernel.org>
Fixes: c2a658d41924 ("riscv: lib: vectorize copy_to_user/copy_from_user")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Tested-by: Vineet Gupta <vineetg@rivosinc.com>
Link: https://lore.kernel.org/r/20240403072638.567446-1-bjorn@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Both the vdso rework and the CONFIG_PAGE_SHIFT changes were merged during
the v6.9 merge window, so it is now possible to use CONFIG_PAGE_SHIFT
instead of including asm/page.h in the vdso.
This avoids the workaround for arm64 - commit 8b3843ae3634 ("vdso/datapage:
Quick fix - use asm/page-def.h for ARM64") and addresses a build warning
for powerpc64:
In file included from <built-in>:4:
In file included from /home/arnd/arm-soc/arm-soc/lib/vdso/gettimeofday.c:5:
In file included from ../include/vdso/datapage.h:25:
arch/powerpc/include/asm/page.h:230:9: error: result of comparison of constant 13835058055282163712 with expression of type 'unsigned long' is always true [-Werror,-Wtautological-constant-out-of-range-compare]
230 | return __pa(kaddr) >> PAGE_SHIFT;
| ^~~~~~~~~~~
arch/powerpc/include/asm/page.h:217:37: note: expanded from macro '__pa'
217 | VIRTUAL_WARN_ON((unsigned long)(x) < PAGE_OFFSET); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
arch/powerpc/include/asm/page.h:202:73: note: expanded from macro 'VIRTUAL_WARN_ON'
202 | #define VIRTUAL_WARN_ON(x) WARN_ON(IS_ENABLED(CONFIG_DEBUG_VIRTUAL) && (x))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~
arch/powerpc/include/asm/bug.h:88:25: note: expanded from macro 'WARN_ON'
88 | int __ret_warn_on = !!(x); \
| ^
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20240320180228.136371-1-arnd@kernel.org
|
|
Starting with commit 7b937cc243e5 ("of: Create of_root if no dtb provided
by firmware"), attempts to boot nios2 images with an external devicetree
blob result in a crash.
Kernel panic - not syncing: early_init_dt_alloc_memory_arch:
Failed to allocate 72 bytes align=0x40
For nios2, a built-in devicetree blob always overrides devicetree blobs
provided by ROMMON/BIOS. This includes the new dummy devicetree blob.
Result is that the dummy devicetree blob is used even if an external
devicetree blob is provided. Since the dummy devicetree blob does not
include any memory information, memory allocations fail, resulting in
the crash.
To fix the problem, only use the built-in devicetree blob if
CONFIG_NIOS2_DTB_SOURCE_BOOL is enabled.
Fixes: 7b937cc243e5 ("of: Create of_root if no dtb provided by firmware")
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240322065419.162416-1-linux@roeck-us.net
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Ensure perf events programmed to count during guest execution are
actually enabled before entering the guest in the nVHE
configuration
- Restore out-of-range handler for stage-2 translation faults
- Several fixes to stage-2 TLB invalidations to avoid stale
translations, possibly including partial walk caches
- Fix early handling of architectural VHE-only systems to ensure E2H
is appropriately set
- Correct a format specifier warning in the arch_timer selftest
- Make the KVM banner message correctly handle all of the possible
configurations
RISC-V:
- Remove redundant semicolon in num_isa_ext_regs()
- Fix APLIC setipnum_le/be write emulation
- Fix APLIC in_clrip[x] read emulation
x86:
- Fix a bug in KVM_SET_CPUID{2,} where KVM looks at the wrong CPUID
entries (old vs. new) and ultimately neglects to clear PV_UNHALT
from vCPUs with HLT-exiting disabled
- Documentation fixes for SEV
- Fix compat ABI for KVM_MEMORY_ENCRYPT_OP
- Fix a 14-year-old goof in a declaration shared by host and guest;
the enabled field used by Linux when running as a guest pushes the
size of "struct kvm_vcpu_pv_apf_data" from 64 to 68 bytes. This is
really unconsequential because KVM never consumes anything beyond
the first 64 bytes, but the resulting struct does not match the
documentation
Selftests:
- Fix spelling mistake in arch_timer selftest"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: arm64: Rationalise KVM banner output
arm64: Fix early handling of FEAT_E2H0 not being implemented
KVM: arm64: Ensure target address is granule-aligned for range TLBI
KVM: arm64: Use TLBI_TTL_UNKNOWN in __kvm_tlb_flush_vmid_range()
KVM: arm64: Don't pass a TLBI level hint when zapping table entries
KVM: arm64: Don't defer TLB invalidation when zapping table entries
KVM: selftests: Fix __GUEST_ASSERT() format warnings in ARM's arch timer test
KVM: arm64: Fix out-of-IPA space translation fault handling
KVM: arm64: Fix host-programmed guest events in nVHE
RISC-V: KVM: Fix APLIC in_clrip[x] read emulation
RISC-V: KVM: Fix APLIC setipnum_le/be write emulation
RISC-V: KVM: Remove second semicolon
KVM: selftests: Fix spelling mistake "trigged" -> "triggered"
Documentation: kvm/sev: clarify usage of KVM_MEMORY_ENCRYPT_OP
Documentation: kvm/sev: separate description of firmware
KVM: SEV: fix compat ABI for KVM_MEMORY_ENCRYPT_OP
KVM: selftests: Check that PV_UNHALT is cleared when HLT exiting is disabled
KVM: x86: Use actual kvm_cpuid.base for clearing KVM_FEATURE_PV_UNHALT
KVM: x86: Introduce __kvm_get_hypervisor_cpuid() helper
KVM: SVM: Return -EINVAL instead of -EBUSY on attempt to re-init SEV/SEV-ES
...
|
|
The srso_alias_untrain_ret() dummy thunk in the !CONFIG_MITIGATION_SRSO
case is there only for the altenative in CALL_UNTRAIN_RET to have
a symbol to resolve.
However, testing with kernels which don't have CONFIG_MITIGATION_SRSO
enabled, leads to the warning in patch_return() to fire:
missing return thunk: srso_alias_untrain_ret+0x0/0x10-0x0: eb 0e 66 66 2e
WARNING: CPU: 0 PID: 0 at arch/x86/kernel/alternative.c:826 apply_returns (arch/x86/kernel/alternative.c:826
Put in a plain "ret" there so that gcc doesn't put a return thunk in
in its place which special and gets checked.
In addition:
ERROR: modpost: "srso_alias_untrain_ret" [arch/x86/kvm/kvm-amd.ko] undefined!
make[2]: *** [scripts/Makefile.modpost:145: Module.symvers] Chyba 1
make[1]: *** [/usr/src/linux-6.8.3/Makefile:1873: modpost] Chyba 2
make: *** [Makefile:240: __sub-make] Chyba 2
since !SRSO builds would use the dummy return thunk as reported by
petr.pisar@atlas.cz, https://bugzilla.kernel.org/show_bug.cgi?id=218679.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202404020901.da75a60f-oliver.sang@intel.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/202404020901.da75a60f-oliver.sang@intel.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The SVE register sets have two different formats, one of which is a wrapped
version of the standard FPSIMD register set and another with actual SVE
register data. At present we check TIF_SVE to see if full SVE register
state should be provided when reading the SVE regset but if we were in a
syscall we may have saved only floating point registers even though that is
set.
Fix this and simplify the logic by checking and using the format which we
recorded when deciding if we should use FPSIMD or SVE format.
Fixes: 8c845e273104 ("arm64/sve: Leave SVE enabled on syscall if we don't context switch")
Cc: <stable@vger.kernel.org> # 6.2.x
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240325-arm64-ptrace-fp-type-v1-1-8dc846caf11f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Align system call table on 8 bytes. With sys_call_table entry size
of 8 bytes that eliminates the possibility of a system call pointer
crossing cache line boundary.
Cc: stable@kernel.org
Suggested-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In case of a sampling event, the PAI PMU device drivers need a
reference to this event. Currently to PMU device driver reference
is removed when a sampling event is destroyed. This may lead to
situations where the reference of the PMU device driver is removed
while being used by a different sampling event.
Reset the event reference pointer of the PMU device driver when
a sampling event is deleted and before the next one might be added.
Fixes: 39d62336f5c1 ("s390/pai: add support for cryptography counters")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
preempt_count-related functions are quite ubiquitous and may be called
by noinstr ones, introducing unwanted instrumentation. Here is one
example call chain:
irqentry_nmi_enter() # noinstr
lockdep_hardirqs_enabled()
this_cpu_read()
__pcpu_size_call_return()
this_cpu_read_*()
this_cpu_generic_read()
__this_cpu_generic_read_nopreempt()
preempt_disable_notrace()
__preempt_count_inc()
__preempt_count_add()
They are very small, so there are no significant downsides to
force-inlining them.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20240320230007.4782-3-iii@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Atomic functions are quite ubiquitous and may be called by noinstr
ones, introducing unwanted instrumentation. They are very small, so
there are no significant downsides to force-inlining them.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20240320230007.4782-2-iii@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The recently added check to figure out if a fault happened on gmap ASCE
dereferences the gmap pointer in lowcore without checking that it is not
NULL. For all non-KVM processes the pointer is NULL, so that some value
from lowcore will be read. With the current layouts of struct gmap and
struct lowcore the read value (aka ASCE) is zero, so that this doesn't lead
to any observable bug; at least currently.
Fix this by adding the missing NULL pointer check.
Fixes: 64c3431808bd ("s390/entry: compare gmap asce to determine guest/host fault")
Acked-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
can1_lpcg: clock-controller@5ace0000 {
... Col1 Col2
clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>,// 0 0
<&dma_ipg_clk>, // 1 4
<&dma_ipg_clk>; // 2 5
clock-indices = <IMX_LPCG_CLK_0>,
<IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver
&flexcan2 {
clocks = <&can1_lpcg 1>, <&can1_lpcg 0>;
^^ ^^
Should be:
clocks = <&can1_lpcg IMX_LPCG_CLK_4>, <&can1_lpcg IMX_LPCG_CLK_0>;
};
Arg0 is divided by 4 in lpcg driver. So flexcan get IMX_SC_PM_CLK_PER by
<&can1_lpcg 1> and <&can1_lpcg 0>. Although function work, code logic is
wrong. Fix it by using correct clock indices.
Cc: stable@vger.kernel.org
Fixes: be85831de020 ("arm64: dts: imx8qm: add can node in devicetree")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
can0_lpcg: clock-controller@5acd0000 {
... Col1 Col2
clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>, // 0 0
<&dma_ipg_clk>, // 1 4
<&dma_ipg_clk>; // 2 5
clock-indices = <IMX_LPCG_CLK_0>,
<IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
}
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
flexcan1: can@5a8d0000 {
clocks = <&can0_lpcg 1>, <&can0_lpcg 0>;
^^ ^^
Should be:
clocks = <&can0_lpcg IMX_LPCG_CLK_4>, <&can0_lpcg IMX_LPCG_CLK_0>;
};
Arg0 is divided by 4 in lpcg driver. flexcan driver get IMX_SC_PM_CLK_PER
by <&can0_lpcg 1> and <&can0_lpcg 0>. Although function can work, code
logic is wrong. Fix it by using correct clock indices.
Cc: stable@vger.kernel.org
Fixes: 5e7d5b023e03 ("arm64: dts: imx8qxp: add flexcan in adma")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
adc0_lpcg: clock-controller@5ac80000 {
... Col1 Col2
clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>, // 0 0
<&dma_ipg_clk>; // 1 4
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
adc0: adc@5a880000 {
clocks = <&adc0_lpcg 0>, <&adc0_lpcg 1>;
^^ ^^
clocks = <&adc0_lpcg IMX_LPCG_CLK_0>, <&adc0_lpcg IMX_LPCG_CLK_4>;
Arg0 is divided by 4 in lpcg driver. So adc get IMX_SC_PM_CLK_PER by
<&adc0_lpcg 0>, <&adc0_lpcg 1>. Although function can work, code logic is
wrong. Fix it by using correct indices.
Cc: stable@vger.kernel.org
Fixes: 1db044b25d2e ("arm64: dts: imx8dxl: add adc0 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
adma_pwm_lpcg: clock-controller@5a590000 {
... col1 col2
clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>,// 0 0
<&dma_ipg_clk>; // 1 4
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
adma_pwm: pwm@5a190000 {
...
clocks = <&adma_pwm_lpcg 1>, <&adma_pwm_lpcg 0>;
^^ ^^
Should be
clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
<&adma_pwm_lpcg IMX_LPCG_CLK_0>;
};
Arg0 will be divided by 4 in lcpg driver, so pwm will get IMX_SC_PM_CLK_PER
by <&adma_pwm_lpcg 1>, <&adma_pwm_lpcg 0>. Although function can work, code
logic is wrong. Fix it by use correct indices.
Cc: stable@vger.kernel.org
Fixes: f1d6a6b991ef ("arm64: dts: imx8qxp: add adma_pwm in adma")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
spi0_lpcg: clock-controller@5a400000 {
... Col0 Col1
clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>,// 0 1
<&dma_ipg_clk>; // 1 4
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
lpspi0: spi@5a000000 {
...
clocks = <&spi0_lpcg 0>, <&spi0_lpcg 1>;
^ ^
Should be:
clocks = <&spi0_lpcg IMX_LPCG_CLK_0>, <&spi0_lpcg IMX_LPCG_CLK_4>;
};
Arg0 is divided by 4 in lpcg driver. <&spi0_lpcg 0> and <&spi0_lpcg 1> are
IMX_SC_PM_CLK_PER. Although code can work, code logic is wrong. It should
use IMX_LPCG_CLK_0 and IMX_LPCG_CLK_4 for lpcg arg0.
Cc: stable@vger.kernel.org
Fixes: c4098885e790 ("arm64: dts: imx8dxl: add lpspi support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
usb2_lpcg: clock-controller@5b270000 {
... Col1 Col2
clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; // 0 6
clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; // 0 7
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
usbotg1: usb@5b0d0000 {
...
clocks = <&usb2_lpcg 0>;
^^
Should be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
};
usbphy1: usbphy@5b100000 {
clocks = <&usb2_lpcg 1>;
^^
SHould be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
};
Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it
by use correct clock indices.
Cc: stable@vger.kernel.org
Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
lpcg's arg0 should use clock indices instead of index.
pwm0_lpcg: clock-controller@5d400000 {
... // Col1 Col2
clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 0 0
<&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 1 1
<&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 2 4
<&lsio_bus_clk>, // 3 5
<&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; // 4 6
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
<IMX_LPCG_CLK_6>;
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
pwm1 {
....
clocks = <&pwm1_lpcg 4>, <&pwm1_lpcg 1>;
^^ ^^
should be:
clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>, <&pwm1_lpcg IMX_LPCG_CLK_1>;
};
Arg0 is divided by 4 in lpcg driver, so index 0 and 1 will be get by pwm
driver, which are same as IMX_LPCG_CLK_6 and IMX_LPCG_CLK_1. Even it can
work, but code logic is wrong. Fixed it by use correct indices.
Cc: stable@vger.kernel.org
Fixes: 23fa99b205ea ("arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The MSR_PEBS_DATA_CFG MSR register is used to configure which data groups
should be generated into a PEBS record, and it's shared among all counters.
If there are different configurations among counters, perf combines all the
configurations.
The first perf command as below requires a complete PEBS record
(including memory info, GPRs, XMMs, and LBRs). The second perf command
only requires a basic group. However, after the second perf command is
running, the MSR_PEBS_DATA_CFG register is cleared. Only a basic group is
generated in a PEBS record, which is wrong. The required information
for the first perf command is missed.
$ perf record --intr-regs=AX,SP,XMM0 -a -C 8 -b -W -d -c 100000003 -o /dev/null -e cpu/event=0xd0,umask=0x81/upp &
$ sleep 5
$ perf record --per-thread -c 1 -e cycles:pp --no-timestamp --no-tid taskset -c 8 ./noploop 1000
The first PEBS event is a system-wide PEBS event. The second PEBS event
is a per-thread event. When the thread is scheduled out, the
intel_pmu_pebs_del() function is invoked to update the PEBS state.
Since the system-wide event is still available, the cpuc->n_pebs is 1.
The cpuc->pebs_data_cfg is cleared. The data configuration for the
system-wide PEBS event is lost.
The (cpuc->n_pebs == 1) check was introduced in commit:
b6a32f023fcc ("perf/x86: Fix PEBS threshold initialization")
At that time, it indeed didn't hurt whether the state was updated
during the removal, because only the threshold is updated.
The calculation of the threshold takes the last PEBS event into
account.
However, since commit:
b752ea0c28e3 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG")
we delay the threshold update, and clear the PEBS data config, which triggers
the bug.
The PEBS data config update scope should not be shrunk during removal.
[ mingo: Improved the changelog & comments. ]
Fixes: b752ea0c28e3 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240401133320.703971-1-kan.liang@linux.intel.com
|
|
Tony encountered this OOPS when the last CPU of a domain goes
offline while running a kernel built with CONFIG_NO_HZ_FULL:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
...
RIP: 0010:__find_nth_andnot_bit+0x66/0x110
...
Call Trace:
<TASK>
? __die()
? page_fault_oops()
? exc_page_fault()
? asm_exc_page_fault()
cpumask_any_housekeeping()
mbm_setup_overflow_handler()
resctrl_offline_cpu()
resctrl_arch_offline_cpu()
cpuhp_invoke_callback()
cpuhp_thread_fun()
smpboot_thread_fn()
kthread()
ret_from_fork()
ret_from_fork_asm()
</TASK>
The NULL pointer dereference is encountered while searching for another
online CPU in the domain (of which there are none) that can be used to
run the MBM overflow handler.
Because the kernel is configured with CONFIG_NO_HZ_FULL the search for
another CPU (in its effort to prefer those CPUs that aren't marked
nohz_full) consults the mask representing the nohz_full CPUs,
tick_nohz_full_mask. On a kernel with CONFIG_CPUMASK_OFFSTACK=y
tick_nohz_full_mask is not allocated unless the kernel is booted with
the "nohz_full=" parameter and because of that any access to
tick_nohz_full_mask needs to be guarded with tick_nohz_full_enabled().
Replace the IS_ENABLED(CONFIG_NO_HZ_FULL) with tick_nohz_full_enabled().
The latter ensures tick_nohz_full_mask can be accessed safely and can be
used whether kernel is built with CONFIG_NO_HZ_FULL enabled or not.
[ Use Ingo's suggestion that combines the two NO_HZ checks into one. ]
Fixes: a4846aaf3945 ("x86/resctrl: Add cpumask_any_housekeeping() for limbo/overflow")
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/ff8dfc8d3dcb04b236d523d1e0de13d2ef585223.1711993956.git.reinette.chatre@intel.com
Closes: https://lore.kernel.org/lkml/ZgIFT5gZgIQ9A9G7@agluck-desk3/
|
|
Since commit 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint
property verification") the ov2680 no longer probes on a imx7s-warp7:
ov2680 1-0036: error -EINVAL: supported link freq 330000000 not found
ov2680 1-0036: probe with driver ov2680 failed with error -22
Fix it by passing the required 'link-frequencies' property as
recommended by:
https://www.kernel.org/doc/html/v6.9-rc1/driver-api/media/camera-sensor.html#handling-clocks
Cc: stable@vger.kernel.org
Fixes: 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint property verification")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
HEAD
KVM/riscv fixes for 6.9, take #1
- Fix spelling mistake in arch_timer selftest
- Remove redundant semicolon in num_isa_ext_regs()
- Fix APLIC setipnum_le/be write emulation
- Fix APLIC in_clrip[x] read emulation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.9, part #1
- Ensure perf events programmed to count during guest execution
are actually enabled before entering the guest in the nVHE
configuration.
- Restore out-of-range handler for stage-2 translation faults.
- Several fixes to stage-2 TLB invalidations to avoid stale
translations, possibly including partial walk caches.
- Fix early handling of architectural VHE-only systems to ensure E2H is
appropriately set.
- Correct a format specifier warning in the arch_timer selftest.
- Make the KVM banner message correctly handle all of the possible
configurations.
|
|
'no-emmc' is not a valid property.
The original intention was to use the 'no-mmc' property.
Change it accordingly to fix the following dt-schema warning:
imx7s-mba7.dtb: mmc@30b40000: Unevaluated properties are not allowed ('no-emmc' was unexpected)
Fixes: d430a7e0e181 ("ARM: dts: imx7-mba7: restrict usdhc interface modes")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 166000000 Hz
^^^^^^^^^
.....
According to
sdhc0_lpcg: clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5b200000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
<&conn_ipg_clk>, <&conn_axi_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
clock-output-names = "sdhc0_lpcg_per_clk",
"sdhc0_lpcg_ipg_clk",
"sdhc0_lpcg_ahb_clk";
power-domains = <&pd IMX_SC_R_SDHC_0>;
}
"per_clk" should be IMX_LPCG_CLK_0 instead of IMX_LPCG_CLK_5.
After correct clocks order:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 198000000 Hz
^^^^^^^^
...
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The commit:
59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()")
made PER_CPU_VAR() to use rip-relative addressing, hence
INCREMENT_CALL_DEPTH macro and skl_call_thunk_template got rip-relative
asm code inside of it. A follow up commit:
17bce3b2ae2d ("x86/callthunks: Handle %rip-relative relocations in call thunk template")
changed x86_call_depth_emit_accounting() to use apply_relocation(),
but mistakenly assumed that the code is being patched in-place (where
the destination of the relocation matches the address of the code),
using *pprog as the destination ip. This is not true for the call depth
accounting, emitted by the BPF JIT, so the calculated address was wrong,
JIT-ed BPF progs on kernels with call depth tracking got broken and
usually caused a page fault.
Pass the destination IP when the BPF JIT emits call depth accounting.
Fixes: 17bce3b2ae2d ("x86/callthunks: Handle %rip-relative relocations in call thunk template")
Signed-off-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Reviewed-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240401185821.224068-3-ubizjak@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adjust the IP passed to `emit_patch` so it calculates the correct offset
for the CALL instruction if `x86_call_depth_emit_accounting` emits code.
Otherwise we will skip some instructions and most likely crash.
Fixes: b2e9dfe54be4 ("x86/bpf: Emit call depth accounting if required")
Link: https://lore.kernel.org/lkml/20230105214922.250473-1-joanbrugueram@gmail.com/
Co-developed-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Signed-off-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240401185821.224068-2-ubizjak@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We are not very consistent when it comes to displaying which mode
we're in (VHE, {n,h}VHE, protected or not). For example, booting
in protected mode with hVHE results in:
[ 0.969545] kvm [1]: Protected nVHE mode initialized successfully
which is mildly amusing considering that the machine is VHE only.
We already cleaned this up a bit with commit 1f3ca7023fe6 ("KVM:
arm64: print Hyp mode"), but that's still unsatisfactory.
Unify the three strings into one and use a mess of conditional
statements to sort it out (yes, it's a slow day).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240321173706.3280796-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Commit 3944382fa6f2 introduced checks for the FEAT_E2H0 not being
implemented. However, the check is absolutely wrong and makes a
point it testing a bit that is guaranteed to be zero.
On top of that, the detection happens way too late, after the
init_el2_state has done its job.
This went undetected because the HW this was tested on has E2H being
RAO/WI, and not RES1. However, the bug shows up when run as a nested
guest, where HCR_EL2.E2H is not necessarily set to 1. As a result,
booting the kernel in hVHE mode fails with timer accesses being
cought in a trap loop (which was fun to debug).
Fix the check for ID_AA64MMFR4_EL1.E2H0, and set the HCR_EL2.E2H bit
early so that it can be checked by the rest of the init sequence.
With this, hVHE works again in a NV environment that doesn't have
FEAT_E2H0.
Fixes: 3944382fa6f2 ("arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20240321115414.3169115-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When zapping a table entry in stage2_try_break_pte(), we issue range
TLB invalidation for the region that was mapped by the table. However,
we neglect to align the base address down to the granule size and so
if we ended up reaching the table entry via a misaligned address then
we will accidentally skip invalidation for some prefix of the affected
address range.
Align 'ctx->addr' down to the granule size when performing TLB
invalidation for an unmapped table in stage2_try_break_pte().
Cc: Raghavendra Rao Ananta <rananta@google.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Shaoqin Huang <shahuang@redhat.com>
Cc: Quentin Perret <qperret@google.com>
Fixes: defc8cc7abf0 ("KVM: arm64: Invalidate the table entries upon a range")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240327124853.11206-5-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Commit c910f2b65518 ("arm64/mm: Update tlb invalidation routines for
FEAT_LPA2") updated the __tlbi_level() macro to take the target level
as an argument, with TLBI_TTL_UNKNOWN (rather than 0) indicating that
the caller cannot provide level information. Unfortunately, the two
implementations of __kvm_tlb_flush_vmid_range() were not updated and so
now ask for an level 0 invalidation if FEAT_LPA2 is implemented.
Fix the problem by passing TLBI_TTL_UNKNOWN instead of 0 as the level
argument to __flush_s2_tlb_range_op() in __kvm_tlb_flush_vmid_range().
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Fixes: c910f2b65518 ("arm64/mm: Update tlb invalidation routines for FEAT_LPA2")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240327124853.11206-4-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The TLBI level hints are for leaf entries only, so take care not to pass
them incorrectly after clearing a table entry.
Cc: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Fixes: 82bb02445de5 ("KVM: arm64: Implement kvm_pgtable_hyp_unmap() at EL2")
Fixes: 6d9d2115c480 ("KVM: arm64: Add support for stage-2 map()/unmap() in generic page-table")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240327124853.11206-3-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Commit 7657ea920c54 ("KVM: arm64: Use TLBI range-based instructions for
unmap") introduced deferred TLB invalidation for the stage-2 page-table
so that range-based invalidation can be used for the accumulated
addresses. This works fine if the structure of the page-tables remains
unchanged, but if entire tables are zapped and subsequently freed then
we transiently leave the hardware page-table walker with a reference
to freed memory thanks to the translation walk caches. For example,
stage2_unmap_walker() will free page-table pages:
if (childp)
mm_ops->put_page(childp);
and issue the TLB invalidation later in kvm_pgtable_stage2_unmap():
if (stage2_unmap_defer_tlb_flush(pgt))
/* Perform the deferred TLB invalidations */
kvm_tlb_flush_vmid_range(pgt->mmu, addr, size);
For now, take the conservative approach and invalidate the TLB eagerly
when we clear a table entry. Note, however, that the existing level
hint passed to __kvm_tlb_flush_vmid_ipa() is incorrect and will be
fixed in a subsequent patch.
Cc: Raghavendra Rao Ananta <rananta@google.com>
Cc: Shaoqin Huang <shahuang@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240327124853.11206-2-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: Fix typo HEIGTH to HEIGHT
Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
kbuild: make -Woverride-init warnings more consistent
modpost: do not make find_tosym() return NULL
export.h: remove include/asm-generic/export.h
kconfig: do not reparent the menu inside a choice block
MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
|
