| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Prepare for and clear .brk early in order to address XenPV guests
failures where the hypervisor verifies page tables and uninitialized
data in that range leads to bogus failures in those checks
- Add any potential setup_data entries supplied at boot to the identity
pagetable mappings to prevent kexec kernel boot failures. Usually,
this is not a problem for the normal kernel as those mappings are
part of the initially mapped 2M pages but if kexec gets to allocate
the second kernel somewhere else, those setup_data entries need to be
mapped there too.
- Fix objtool not to discard text references from the __tracepoints
section so that ENDBR validation still works
- Correct the setup_data types limit as it is user-visible, before 5.19
releases
* tag 'x86_urgent_for_v5.19_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Fix the setup data types max limit
x86/ibt, objtool: Don't discard text references from tracepoint section
x86/compressed/64: Add identity mappings for setup_data entries
x86: Fix .brk attribute in linker script
x86: Clear .brk area at early boot
x86/xen: Use clear_bss() for Xen PV guests
|
|
Commit in Fixes forgot to change the SETUP_TYPE_MAX definition which
contains the highest valid setup data type.
Correct that.
Fixes: 5ea98e01ab52 ("x86/boot: Add Confidential Computing type to setup_data")
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/ddba81dd-cc92-699c-5274-785396a17fb5@zytor.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- On Power8 bare metal, fix creation of RNG platform devices, which are
needed for the /dev/hwrng driver to probe correctly.
Thanks to Jason A. Donenfeld, and Sachin Sant.
* tag 'powerpc-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: delay rng platform device creation until later in boot
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two recent regressions related to CPPC support.
Specifics:
- Prevent _CPC from being used if the platform firmware does not
confirm CPPC v2 support via _OSC (Mario Limonciello)
- Allow systems with X86_FEATURE_CPPC set to use _CPC even if CPPC
support cannot be agreed on via _OSC (Mario Limonciello)"
* tag 'acpi-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Don't require _OSC if X86_FEATURE_CPPC is supported
ACPI: CPPC: Only probe for _CPC if CPPC v2 is acked
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"A fix for tinyconfig build error, a fix for section mismatch warning,
and two cleanups of obsolete code"
* tag 'loongarch-fixes-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Fix section mismatch warning
LoongArch: Fix build errors for tinyconfig
LoongArch: Remove obsolete mentions of vcsr
LoongArch: Drop these obsolete selects in Kconfig
|
|
init_numa_memory() is annotated __init and not used by any module,
thus don't export it.
Remove not needed EXPORT_SYMBOL for init_numa_memory() to fix the
following section mismatch warning:
MODPOST vmlinux.symvers
WARNING: modpost: vmlinux.o(___ksymtab+init_numa_memory+0x0): Section mismatch in reference
from the variable __ksymtab_init_numa_memory to the function .init.text:init_numa_memory()
The symbol init_numa_memory is exported and annotated __init
Fix this by removing the __init annotation of init_numa_memory or drop the export.
This is build on Linux 5.19-rc4.
Fixes: d4b6f1562a3c ("LoongArch: Add Non-Uniform Memory Access (NUMA) support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Building loongarch:tinyconfig fails with the following error.
./arch/loongarch/include/asm/page.h: In function 'pfn_valid':
./arch/loongarch/include/asm/page.h:42:32: error: 'PHYS_OFFSET' undeclared
Add the missing include file and fix succeeding vdso errors.
Fixes: 09cfefb7fa70 ("LoongArch: Add memory management")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The `vcsr` only exists in the old hardware design, it isn't used in any
shipped hardware from Loongson-3A5000 on. Both scalar FP and LSX/LASX
instructions use the `fcsr` as their control and status registers now.
For example, the RM control bit in fcsr0 is shared by FP, LSX and LASX
instructions.
Particularly, fcsr16 to fcsr31 are reserved for LSX/LASX now, access to
these registers has no visible effect if LSX/LASX is enabled, and will
cause SXD/ASXD exceptions if LSX/LASX is not enabled.
So, mentions of vcsr are obsolete in the first place (it was just used
for debugging), let's remove them.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Qi Hu <huqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Commit fa96b57c1490 ("LoongArch: Add build infrastructure") adds the new
file arch/loongarch/Kconfig.
As the work on LoongArch was probably quite some time under development,
various config symbols have changed and disappeared from the time of
initial writing of the Kconfig file and its inclusion in the repository.
The following four commits:
commit c126a53c2760 ("arch: remove GENERIC_FIND_FIRST_BIT entirely")
commit 140c8180eb7c ("arch: remove HAVE_COPY_THREAD_TLS")
commit aca52c398389 ("mm: remove CONFIG_HAVE_MEMBLOCK")
commit 3f08a302f533 ("mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option")
remove the mentioned config symbol, and enable the intended setup by
default without configuration.
Drop these obsolete selects in loongarch's Kconfig.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Pull OpenRISC fixes from Stafford Horne:
"Fixups for OpenRISC found during recent testing:
- An OpenRISC irqchip fix to stop acking level interrupts which was
causing issues on SMP platforms
- A comment typo fix in our unwinder code"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: unwinder: Fix grammar issue in comment
irqchip: or1k-pic: Undefine mask_ack for level triggered hardware
|
|
The decompressed kernel initially relies on the identity map set up by
the boot/compressed kernel for accessing things like boot_params. With
the recent introduction of SEV-SNP support, the decompressed kernel
also needs to access the setup_data entries pointed to by
boot_params->hdr.setup_data.
This can lead to a crash in the kexec kernel during early boot due to
these entries not currently being included in the initial identity map,
see thread at Link below.
Include mappings for the setup_data entries in the initial identity map.
[ bp: Massage commit message and use a helper var for better readability. ]
Fixes: b190a043c49a ("x86/sev: Add SEV-SNP feature detection/setup")
Reported-by: Jun'ichi Nomura <junichi.nomura@nec.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/TYCPR01MB694815CD815E98945F63C99183B49@TYCPR01MB6948.jpnprd01.prod.outlook.com
|
|
commit 72f2ecb7ece7 ("ACPI: bus: Set CPPC _OSC bits for all and
when CPPC_LIB is supported") added support for claiming to
support CPPC in _OSC on non-Intel platforms.
This unfortunately caused a regression on a vartiety of AMD
platforms in the field because a number of AMD platforms don't set
the `_OSC` bit 5 or 6 to indicate CPPC or CPPC v2 support.
As these AMD platforms already claim CPPC support via a dedicated
MSR from `X86_FEATURE_CPPC`, use this enable this feature rather
than requiring the `_OSC` on platforms with a dedicated MSR.
If there is additional breakage on the shared memory designs also
missing this _OSC, additional follow up changes may be needed.
Fixes: 72f2ecb7ece7 ("Set CPPC _OSC bits for all and when CPPC_LIB is supported")
Reported-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen security fixes from Juergen Gross:
- XSA-403 (4 patches for blkfront and netfront drivers):
Linux Block and Network PV device frontends don't zero memory regions
before sharing them with the backend (CVE-2022-26365,
CVE-2022-33740). Additionally the granularity of the grant table
doesn't allow sharing less than a 4K page, leading to unrelated data
residing in the same 4K page as data shared with a backend being
accessible by such backend (CVE-2022-33741, CVE-2022-33742).
- XSA-405 (1 patch for netfront driver, only 5.10 and newer):
While adding logic to support XDP (eXpress Data Path), a code label
was moved in a way allowing for SKBs having references (pointers)
retained for further processing to nevertheless be freed.
- XSA-406 (1 patch for Arm specific dom0 code):
When mapping pages of guests on Arm, dom0 is using an rbtree to keep
track of the foreign mappings.
Updating of that rbtree is not always done completely with the
related lock held, resulting in a small race window, which can be
used by unprivileged guests via PV devices to cause inconsistencies
of the rbtree. These inconsistencies can lead to Denial of Service
(DoS) of dom0, e.g. by causing crashes or the inability to perform
further mappings of other guests' memory pages.
* tag 'xsa-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/arm: Fix race in RB-tree based P2M accounting
xen-netfront: restore __skb_queue_tail() positioning in xennet_get_responses()
xen/blkfront: force data bouncing when backend is untrusted
xen/netfront: force data bouncing when backend is untrusted
xen/netfront: fix leaking data in shared pages
xen/blkfront: fix leaking data in shared pages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of minor patches for Arm DTS files and soc specific
drivers:
- More reference counting bug fixes for DT nodes, and other trivial
code fixes
- Multiple code fixes for the Arm SCMI firmware driver to improve
compatibility with firmware implementations.
- A patch series for at91 to address power management issues from
using the wrong DT compatible properties.
- A series of patches to fix pad settings for NXP imx8mp to leave the
configuration untouched from the boot loader
- Additional DT fixes for qualcomm and NXP platforms
- A boot time fix for stm32mp15 DT
- Konrad Dybcio becomes an additional reviewer for the Qualcomm
platforms"
* tag 'soc-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
soc: qcom: smem: use correct format characters
ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15
ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI
ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board
ARM: dts: stm32: use the correct clock source for CEC on stm32mp151
ARM: dts: stm32: fix pwr regulators references to use scmi
soc: ixp4xx/npe: Fix unused match warning
ARM: at91: pm: Mark at91_pm_secure_init as __init
ARM: at91: fix soc detection for SAM9X60 SiPs
ARM: dts: at91: sama5d2_icp: fix eeprom compatibles
ARM: dts: at91: sam9x60ek: fix eeprom compatible and size
ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt
ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt
ARM: at91: pm: use proper compatible for sama5d2's rtc
arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo
firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API
firmware: arm_scmi: Fix response size warning for OPTEE transport
arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes
STM32 DT fixes for v5.19, round 2
Highlights:
-----------
-Fixes STM32MP15:
- Add missing usbh clock and fix clk order for usbh to avoid PLL
issue.
- Fix SCMI version: use scmi regulator and update missing SCMI
clocks to be able to correcly boot.
* tag 'stm32-dt-for-v5.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15
ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI
ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board
ARM: dts: stm32: use the correct clock source for CEC on stm32mp151
ARM: dts: stm32: fix pwr regulators references to use scmi
Link: https://lore.kernel.org/r/1259e082-a3a4-96a5-ec9c-05dbb893a746@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The platform device for the rng must be created much later in boot.
Otherwise it tries to connect to a parent that doesn't yet exist,
resulting in this splat:
[ 0.000478] kobject: '(null)' ((____ptrval____)): is not initialized, yet kobject_get() is being called.
[ 0.002925] [c000000002a0fb30] [c00000000073b0bc] kobject_get+0x8c/0x100 (unreliable)
[ 0.003071] [c000000002a0fba0] [c00000000087e464] device_add+0xf4/0xb00
[ 0.003194] [c000000002a0fc80] [c000000000a7f6e4] of_device_add+0x64/0x80
[ 0.003321] [c000000002a0fcb0] [c000000000a800d0] of_platform_device_create_pdata+0xd0/0x1b0
[ 0.003476] [c000000002a0fd00] [c00000000201fa44] pnv_get_random_long_early+0x240/0x2e4
[ 0.003623] [c000000002a0fe20] [c000000002060c38] random_init+0xc0/0x214
This patch fixes the issue by doing the platform device creation inside
of machine_subsys_initcall.
Fixes: f3eac426657d ("powerpc/powernv: wire up rng during setup_arch")
Cc: stable@vger.kernel.org
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
[mpe: Change "of node" to "platform device" in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220630121654.1939181-1-Jason@zx2c4.com
|
|
The USBH composed of EHCI and OHCI controllers needs the PHY clock to be
initialized first, before enabling (gating) them. The reverse is also
required when going to suspend.
So, add USBPHY clock as 1st entry in both controllers, so the USBPHY PLL
gets enabled 1st upon controller init. Upon suspend/resume, this also makes
the clock to be disabled/re-enabled in the correct order.
This fixes some IRQ storm conditions seen when going to low-power, due to
PHY PLL being disabled before all clocks are cleanly gated.
Fixes: 949a0c0dec85 ("ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c")
Fixes: db7be2cb87ae ("ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Delete the node fixed clock managed by secure world with SCMI.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
LSE clock is provided by SCMI.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The peripheral clock of CEC is not LSE but CEC.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Fixes stm32mp15*-scmi DTS files introduced in [1] to also access PWR
regulators through SCMI service. This is needed since enabling secure
only access to RCC clock and reset controllers also enables secure
access only on PWR voltage regulators reg11, reg18 and usb33 hence
these must also be accessed through SCMI Voltage Domain protocol.
This change applies on commit [2] that already corrects issues from
commit [1].
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: [1] https://lore.kernel.org/linux-arm-kernel/20220422150952.20587-7-alexandre.torgue@foss.st.com
Link: [2] https://lore.kernel.org/linux-arm-kernel/20220613071920.5463-1-alexandre.torgue@foss.st.com
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 DT fixes for v5.19
This removes duplicate includes in the sc7180-trogdor files, which
accidentally ended up disabling nodes intended to be enabled.
It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's
interconnects property is updated to match the #interconnect-cells,
avoiding sync_state issues and the GIC ITS is defined, to correct the
references from the PCIe nodes. On SDM845 the display subsystem's AHB
clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2
are correctly specified.
Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC.
* tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo
MAINTAINERS: Add myself as a reviewer for Qualcomm ARM/64 support
arm64: dts: qcom: sdm845: use dispcc AHB clock for mdss node
arm64: dts: qcom: sm8450 add ITS device tree node
arm64: dts: qcom: msm8994: Fix CPU6/7 reg values
arm64: dts: qcom: sm8450: fix interconnects property of UFS node
arm64: dts: qcom: Remove duplicate sc7180-trogdor include on lazor/homestar
Link: https://lore.kernel.org/r/20220703030208.408109-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Two important fixes for bugs in code which was added in 5.18:
- Fix userspace signal failures on 32-bit kernel due to a bug in vDSO
- Fix 32-bit load-word unalignment exception handler which returned
wrong values"
* tag 'for-5.19/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix vDSO signal breakage on 32-bit kernel
parisc/unaligned: Fix emulate_ldw() breakage
|
|
Addition of vDSO support for parisc in kernel v5.18 suddenly broke glibc
signal testcases on a 32-bit kernel.
The trampoline code (sigtramp.S) which is mapped into userspace includes
an offset to the context data on the stack, which is used by gdb and
glibc to get access to registers.
In a 32-bit kernel we used by mistake the offset into the compat context
(which is valid on a 64-bit kernel only) instead of the offset into the
"native" 32-bit context.
Reported-by: John David Anglin <dave.anglin@bell.net>
Tested-by: John David Anglin <dave.anglin@bell.net>
Fixes: df24e1783e6e ("parisc: Add vDSO support")
CC: stable@vger.kernel.org # 5.18
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix BPF uapi confusion about the correct type of bpf_user_pt_regs_t.
- Fix virt_addr_valid() when memory is hotplugged above the boot-time
high_memory value.
- Fix a bug in 64-bit Book3E map_kernel_page() which would incorrectly
allocate a PMD page at PUD level.
- Fix a couple of minor issues found since we enabled KASAN for 64-bit
Book3S.
Thanks to Aneesh Kumar K.V, Cédric Le Goater, Christophe Leroy, Kefeng
Wang, Liam Howlett, Nathan Lynch, and Naveen N. Rao.
* tag 'powerpc-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/memhotplug: Add add_pages override for PPC
powerpc/bpf: Fix use of user_pt_regs in uapi
powerpc/prom_init: Fix kernel config grep
powerpc/book3e: Fix PUD allocation size in map_kernel_page()
powerpc/xive/spapr: correct bitmap allocation size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes
Amlogic ARM mach-meson changes for v5.20:
- Fix refcount leak in meson_smp_prepare_cpus
* tag 'amlogic-arm-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: meson: Fix refcount leak in meson_smp_prepare_cpus
Link: https://lore.kernel.org/r/cbf6bcb5-c7be-40fe-4436-4578c9d6c532@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Restore TLB invalidation for the 'break-before-make' rule on
contiguous ptes (missed in a recent clean-up)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hugetlb: Restore TLB invalidation for BBM on contiguous ptes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix purgatory build process so bin2c tool does not get built
unnecessarily and the Makefile is more consistent with other
architectures.
- Return earlier simple design of arch_get_random_seed_long|int() and
arch_get_random_long|int() callbacks as result of changes in generic
RNG code.
- Fix minor comment typos and spelling mistakes.
* tag 's390-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/qdio: Fix spelling mistake
s390/sclp: Fix typo in comments
s390/archrandom: simplify back to earlier design and initialize earlier
s390/purgatory: remove duplicated build rule of kexec-purgatory.o
s390/purgatory: hard-code obj-y in Makefile
s390: remove unneeded 'select BUILD_BIN2C'
|
|
Commit fb396bb459c1 ("arm64/hugetlb: Drop TLB flush from get_clear_flush()")
removed TLB invalidation from get_clear_flush() [now get_clear_contig()]
on the basis that the core TLB invalidation code is aware of hugetlb
mappings backed by contiguous page-table entries and will cover the
correct virtual address range.
However, this change also resulted in the TLB invalidation being removed
from the "break" step in the break-before-make (BBM) sequence used
internally by huge_ptep_set_{access_flags,wrprotect}(), therefore
making the BBM sequence unsafe irrespective of later invalidation.
Although the architecture is desperately unclear about how exactly
contiguous ptes should be updated in a live page-table, restore TLB
invalidation to our BBM sequence under the assumption that BBM is the
right thing to be doing in the first place.
Fixes: fb396bb459c1 ("arm64/hugetlb: Drop TLB flush from get_clear_flush()")
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220629095349.25748-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.19, round 2:
- Fix the SDIO description for imx7d-smegw01 board to ensure there is
no communication made at 1.8V.
- Fix pgc_ispdwp power-domain clock, which should be
IMX8MP_CLK_MEDIA_ISP_ROOT.
- Re-enable framebuffer support in mxs_defconfig to fix a Kconfig
regression.
- A series from Peng Fan (and Sherry Sun) fixing various pads on i.MX8MP
based boards to leave reserved bits untouched.
* tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings
arm64: dts: imx8mp-venice-gw74xx: correct pad settings
arm64: dts: imx8mp-evk: correct I2C3 pad settings
arm64: dts: imx8mp-evk: correct I2C1 pad settings
arm64: dts: imx8mp-evk: correct I2C5 pad settings
arm64: dts: imx8mp-evk: correct vbus pad settings
arm64: dts: imx8mp-evk: correct eqos pad settings
arm64: dts: imx8mp-evk: correct vbus pad settings
arm64: dts: imx8mp-evk: correct gpio-led pad settings
arm64: dts: imx8mp-evk: correct the uart2 pinctl value
arm64: dts: imx8mp-evk: correct mmc pad settings
ARM: mxs_defconfig: Enable the framebuffer
arm64: dts: imx8mp: correct clock of pgc_ispdwp
ARM: dts: imx7d-smegw01: Fix the SDIO description
Link: https://lore.kernel.org/r/20220629021244.GL819983@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 5.19
It contains 3 SoC fixes and 2 DT fixes:
SoC:
- fix the wakeup from RTC and RTT for ULP1 mode
- fix section mismatch warning
- fix SAM9X60 SiP detection
DT:
- fixes the EEPROMs compatibles for sama5d2_icp and sam9x60ek and EEPROM
size for sam9x60ek
* tag 'at91-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: pm: Mark at91_pm_secure_init as __init
ARM: at91: fix soc detection for SAM9X60 SiPs
ARM: dts: at91: sama5d2_icp: fix eeprom compatibles
ARM: dts: at91: sam9x60ek: fix eeprom compatible and size
ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt
ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt
ARM: at91: pm: use proper compatible for sama5d2's rtc
Link: https://lore.kernel.org/r/20220628135130.3114878-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Commit in Fixes added the "NOLOAD" attribute to the .brk section as a
"failsafe" measure.
Unfortunately, this leads to the linker no longer covering the .brk
section in a program header, resulting in the kernel loader not knowing
that the memory for the .brk section must be reserved.
This has led to crashes when loading the kernel as PV dom0 under Xen,
but other scenarios could be hit by the same problem (e.g. in case an
uncompressed kernel is used and the initrd is placed directly behind
it).
So drop the "NOLOAD" attribute. This has been verified to correctly
cover the .brk section by a program header of the resulting ELF file.
Fixes: e32683c6f7d2 ("x86/mm: Fix RESERVE_BRK() for older binutils")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20220630071441.28576-4-jgross@suse.com
|
|
The .brk section has the same properties as .bss: it is an alloc-only
section and should be cleared before being used.
Not doing so is especially a problem for Xen PV guests, as the
hypervisor will validate page tables (check for writable page tables
and hypervisor private bits) before accepting them to be used.
Make sure .brk is initially zero by letting clear_bss() clear the brk
area, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220630071441.28576-3-jgross@suse.com
|
|
Instead of clearing the bss area in assembly code, use the clear_bss()
function.
This requires to pass the start_info address as parameter to
xen_start_kernel() in order to avoid the xen_start_info being zeroed
again.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220630071441.28576-2-jgross@suse.com
|
|
During the PV driver life cycle the mappings are added to
the RB-tree by set_foreign_p2m_mapping(), which is called from
gnttab_map_refs() and are removed by clear_foreign_p2m_mapping()
which is called from gnttab_unmap_refs(). As both functions end
up calling __set_phys_to_machine_multi() which updates the RB-tree,
this function can be called concurrently.
There is already a "p2m_lock" to protect against concurrent accesses,
but the problem is that the first read of "phys_to_mach.rb_node"
in __set_phys_to_machine_multi() is not covered by it, so this might
lead to the incorrect mappings update (removing in our case) in RB-tree.
In my environment the related issue happens rarely and only when
PV net backend is running, the xen_add_phys_to_mach_entry() claims
that it cannot add new pfn <-> mfn mapping to the tree since it is
already exists which results in a failure when mapping foreign pages.
But there might be other bad consequences related to the non-protected
root reads such use-after-free, etc.
While at it, also fix the similar usage in __pfn_to_mfn(), so
initialize "struct rb_node *n" with the "p2m_lock" held in both
functions to avoid possible bad consequences.
This is CVE-2022-33744 / XSA-406.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Change 'defineable' to 'definable'.
Change 'paramater' to 'parameter'.
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Link: https://lore.kernel.org/r/20220623060543.12870-1-jiaming@nfschina.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
s390x appears to present two RNG interfaces:
- a "TRNG" that gathers entropy using some hardware function; and
- a "DRBG" that takes in a seed and expands it.
Previously, the TRNG was wired up to arch_get_random_{long,int}(), but
it was observed that this was being called really frequently, resulting
in high overhead. So it was changed to be wired up to arch_get_random_
seed_{long,int}(), which was a reasonable decision. Later on, the DRBG
was then wired up to arch_get_random_{long,int}(), with a complicated
buffer filling thread, to control overhead and rate.
Fortunately, none of the performance issues matter much now. The RNG
always attempts to use arch_get_random_seed_{long,int}() first, which
means a complicated implementation of arch_get_random_{long,int}() isn't
really valuable or useful to have around. And it's only used when
reseeding, which means it won't hit the high throughput complications
that were faced before.
So this commit returns to an earlier design of just calling the TRNG in
arch_get_random_seed_{long,int}(), and returning false in arch_get_
random_{long,int}().
Part of what makes the simplification possible is that the RNG now seeds
itself using the TRNG at bootup. But this only works if the TRNG is
detected early in boot, before random_init() is called. So this commit
also causes that check to happen in setup_arch().
Cc: stable@vger.kernel.org
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Ingo Franzki <ifranzki@linux.ibm.com>
Cc: Juergen Christ <jchrist@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20220610222023.378448-1-Jason@zx2c4.com
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
This is equivalent to the pattern rule in scripts/Makefile.build.
Having the dependency on $(obj)/purgatory.ro is enough.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220613170902.1775211-3-masahiroy@kernel.org
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The purgatory/ directory is entirely guarded in arch/s390/Kbuild.
CONFIG_ARCH_HAS_KEXEC_PURGATORY is bool type.
$(CONFIG_ARCH_HAS_KEXEC_PURGATORY) is always 'y' when Kbuild visits
this Makefile for building.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220613170902.1775211-2-masahiroy@kernel.org
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Since commit 4c0f032d4963 ("s390/purgatory: Omit use of bin2c"),
s390 builds the purgatory without using bin2c.
Remove 'select BUILD_BIN2C' to avoid the unneeded build of bin2c.
Fixes: 4c0f032d4963 ("s390/purgatory: Omit use of bin2c")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220613170902.1775211-1-masahiroy@kernel.org
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
With commit ffa0b64e3be5 ("powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit")
the kernel now validate the addr against high_memory value. This results
in the below BUG_ON with dax pfns.
[ 635.798741][T26531] kernel BUG at mm/page_alloc.c:5521!
1:mon> e
cpu 0x1: Vector: 700 (Program Check) at [c000000007287630]
pc: c00000000055ed48: free_pages.part.0+0x48/0x110
lr: c00000000053ca70: tlb_finish_mmu+0x80/0xd0
sp: c0000000072878d0
msr: 800000000282b033
current = 0xc00000000afabe00
paca = 0xc00000037ffff300 irqmask: 0x03 irq_happened: 0x05
pid = 26531, comm = 50-landscape-sy
kernel BUG at :5521!
Linux version 5.19.0-rc3-14659-g4ec05be7c2e1 (kvaneesh@ltc-boston8) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #625 SMP Thu Jun 23 00:35:43 CDT 2022
1:mon> t
[link register ] c00000000053ca70 tlb_finish_mmu+0x80/0xd0
[c0000000072878d0] c00000000053ca54 tlb_finish_mmu+0x64/0xd0 (unreliable)
[c000000007287900] c000000000539424 exit_mmap+0xe4/0x2a0
[c0000000072879e0] c00000000019fc1c mmput+0xcc/0x210
[c000000007287a20] c000000000629230 begin_new_exec+0x5e0/0xf40
[c000000007287ae0] c00000000070b3cc load_elf_binary+0x3ac/0x1e00
[c000000007287c10] c000000000627af0 bprm_execve+0x3b0/0xaf0
[c000000007287cd0] c000000000628414 do_execveat_common.isra.0+0x1e4/0x310
[c000000007287d80] c00000000062858c sys_execve+0x4c/0x60
[c000000007287db0] c00000000002c1b0 system_call_exception+0x160/0x2c0
[c000000007287e10] c00000000000c53c system_call_common+0xec/0x250
The fix is to make sure we update high_memory on memory hotplug.
This is similar to what x86 does in commit 3072e413e305 ("mm/memory_hotplug: introduce add_pages")
Fixes: ffa0b64e3be5 ("powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220629050925.31447-1-aneesh.kumar@linux.ibm.com
|
|
Trying to build a .c file that includes <linux/bpf_perf_event.h>:
$ cat test_bpf_headers.c
#include <linux/bpf_perf_event.h>
throws the below error:
/usr/include/linux/bpf_perf_event.h:14:28: error: field ‘regs’ has incomplete type
14 | bpf_user_pt_regs_t regs;
| ^~~~
This is because we typedef bpf_user_pt_regs_t to 'struct user_pt_regs'
in arch/powerpc/include/uaps/asm/bpf_perf_event.h, but 'struct
user_pt_regs' is not exposed to userspace.
Powerpc has both pt_regs and user_pt_regs structures. However, unlike
arm64 and s390, we expose user_pt_regs to userspace as just 'pt_regs'.
As such, we should typedef bpf_user_pt_regs_t to 'struct pt_regs' for
userspace.
Within the kernel though, we want to typedef bpf_user_pt_regs_t to
'struct user_pt_regs'.
Remove arch/powerpc/include/uapi/asm/bpf_perf_event.h so that the
uapi/asm-generic version of the header is exposed to userspace.
Introduce arch/powerpc/include/asm/bpf_perf_event.h so that we can
typedef bpf_user_pt_regs_t to 'struct user_pt_regs' for use within the
kernel.
Note that this was not showing up with the bpf selftest build since
tools/include/uapi/asm/bpf_perf_event.h didn't include the powerpc
variant.
Fixes: a6460b03f945ee ("powerpc/bpf: Fix broken uapi for BPF_PROG_TYPE_PERF_EVENT")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Use typical naming for header include guard]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627191119.142867-1-naveen.n.rao@linux.vnet.ibm.com
|
|
at91_pm_secure_init() is used inside sama5d2_pm_init(), which has
the __init notation.
Pass the __init notation to at91_pm_secure_init() as well to fix the
following section mismatch warning:
WARNING: modpost: vmlinux.o(.text.unlikely+0x2138): Section mismatch in reference from the function at91_pm_secure_init() to the (unknown reference) .init.rodata:(unknown)
Fixes: f2f5cf78a333 ("ARM: at91: pm: add support for sama5d2 secure suspend")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220622114810.1186330-1-festevam@gmail.com
|
|
The eeprom memories on the board are microchip 24aa025e48, which are 2 Kbits
and are compatible with at24c02 not at24c32.
Fixes: 68a95ef72cefe ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220607090455.80433-2-eugen.hristev@microchip.com
|
|
The board has a microchip 24aa025e48 eeprom, which is a 2 Kbits memory,
so it's compatible with at24c02 not at24c32.
Also the size property is wrong, it's not 128 bytes, but 256 bytes.
Thus removing and leaving it to the default (256).
Fixes: 1e5f532c27371 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220607090455.80433-1-eugen.hristev@microchip.com
|
|
Use proper compatible strings for SAMA7G5's RTC and RTT IPs. These are
necessary for configuring wakeup sources for ULP1 PM mode.
Fixes: 6501330f9f5e ("ARM: at91: pm: add pm support for SAMA7G5")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220523092421.317345-4-claudiu.beznea@microchip.com
|
|
Use proper compatible strings for SAM9X60's RTC and RTT IPs. These are
necessary for configuring wakeup sources for ULP1 PM mode.
Fixes: eaedc0d379da ("ARM: at91: pm: add ULP1 support for SAM9X60")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220523092421.317345-3-claudiu.beznea@microchip.com
|
|
Use proper compatible strings for SAMA5D2's RTC IPs. This is necessary
for configuring wakeup sources for ULP1 PM mode.
Fixes: d7484f5c6b3b ("ARM: at91: pm: configure wakeup sources for ULP1 mode")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220523092421.317345-2-claudiu.beznea@microchip.com
|
