summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-01-18ARM: OMAP2+: clock: use driver API instead of direct memory read/writeTero Kristo7-54/+63
Clock nodes shall use the services provided by underlying drivers to access the hardware registers instead of direct memory read/write. Thus, change all the code to use the new omap2_clk_readl / omap2_clk_writel APIs for this. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18ARM: OMAP2+: clock: add support for indexed memmapsTero Kristo2-1/+30
Using indexed memmaps is required for isolating the actual memory access from the clock code. Now, the driver providing the support for the clock IP block provides the low level routines for reading/writing clock registers also. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18ARM: dts: am43xx clock dataTero Kristo2-0/+684
This patch creates a unique node for each clock in the AM43xx power, reset and clock manager (PRCM). Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18ARM: dts: AM35xx: use DT clock dataTero Kristo1-0/+3
AM35xx now uses the clock data from device tree. Most of the data is shared with OMAP3xxx, but as there is some delta, a new base .dtsi file is also created for the SoC. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18ARM: dts: omap3 clock dataTero Kristo10-0/+2844
This patch creates a unique node for each clock in the OMAP3 power, reset and clock manager (PRCM). Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18ARM: dts: am33xx clock dataTero Kristo2-0/+692
This patch creates a unique node for each clock in the AM33xx power, reset and clock manager (PRCM). Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18ARM: dts: DRA7: Add PCIe related clock nodesJ Keerthy1-0/+25
This patch adds optfclk_pciephy_clk and optfclk_pciephy_div_clk which are used by PCIe phy. It also adds a mux clock to choose the source of optfclk_pciephy_div_clk clock. Signed-off-by: J Keerthy <j-keerthy@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clockJ Keerthy1-6/+3
This patch changes apll_pcie_m2_ck to fixed factor clock as there are no configurable divider associated to m2. Signed-off-by: J Keerthy <j-keerthy@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18ARM: dts: clk: Add apll related clocksJ Keerthy1-3/+11
The patch adds a mux node to choose the parent of apll_pcie_ck node. Signed-off-by: J Keerthy <j-keerthy@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18ARM: dts: dra7 clock dataTero Kristo2-0/+2026
This patch creates a unique node for each clock in the DRA7 power, reset and clock manager (PRCM). TODO: apll_pcie clock node is still a dummy in this version, and proper support for the APLL should be added. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18ARM: dts: omap5 clock dataTero Kristo2-0/+1453
This patch creates a unique node for each clock in the OMAP5 power, reset and clock manager (PRCM). Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18ARM: dts: omap4 clock dataTero Kristo6-0/+1754
This patch creates a unique node for each clock in the OMAP4 power, reset and clock manager (PRCM). OMAP443x and OMAP446x have slightly different clock tree which is taken into account in the data. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add omap3 clock init fileTero Kristo1-1/+0
clk-3xxx.c now contains the clock init functionality for omap3, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add interface clock support for OMAP3Tero Kristo1-5/+0
OMAP3 has interface clocks in addition to functional clocks, which require special handling for the autoidle and idle status register offsets mainly. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add am33xx clock init fileTero Kristo1-1/+0
clk-33xx.c now contains the clock init functionality for am33xx, including DT clock registration and adding of static clkdev entries. This patch also moves the omap2_clk_enable_init_clocks declaration to the driver include, as this is needed by the am33xx clock init code. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add omap5 clock init fileTero Kristo1-0/+1
clk-54xx.c now contains the clock init functionality for omap5, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add omap4 clock init fileTero Kristo1-1/+0
clk-44xx.c now contains the clock init functionality for omap4, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18clk: ti: add composite clock supportTero Kristo1-3/+0
This is a multipurpose clock node, which contains support for multiple sub-clocks. Uses basic composite clock type to implement the actual functionality, and TI specific gate, mux and divider clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add autoidle supportTero Kristo1-0/+6
TI clk driver now routes some of the basic clocks through own registration routine to allow autoidle support. This routine just checks a couple of device node properties and adds autoidle support if required, and just passes the registration forward to basic clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: Add DPLL clock supportTero Kristo2-165/+1
The OMAP clock driver now supports DPLL clock type. This patch also adds support for DT DPLL nodes. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18ARM: DRA7XX: Add support for DRA7XX only buildTero Kristo2-8/+11
SOC_DRA7XX was under wrong menu within Kconfig file, which prevented DRA7XX only build. Fixed the kconfig options for this SoC as we are there. voltage.c needs to be added to the DRA7XX build also, otherwise DRA7XX only build will fail. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18ARM: DRA7XX/AM43XX: randconfig fixesTero Kristo1-0/+3
DRA7XX and AM43XX were missing common clock code from the Makefile, which causes build breakage in DRA7XX / AM43XX only builds once clock support for these SoCs is added. Add the missing entries to the Makefile as preparation of this. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-17Merge remote-tracking branch 'linaro/clk-next' into clk-nextMike Turquette9-3/+16
2014-01-09Merge tag 'for_3.14/samsung-clk' of ↵Mike Turquette2-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into clk-next-samsung (A bit late) first round of Samsung clock patches for v3.14.
2014-01-08ARM: dts: Add clock provider specific properties to max77686 nodeTomasz Figa3-0/+3
This patch adds a label and #clock-cells property to device node of max77686 PMIC to allow using it as a clock provider. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-08ARM: dts: exynos5420: add input clocks to audss clock controllerAndrew Bresticker1-2/+2
Specify the remaining input clocks (pll_ref, pll_in, and sclk_pcm_in) for the AudioSS clock controller. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-01-08ARM: dts: exynos5250: add input clocks to audss clock controllerAndrew Bresticker1-0/+2
Specify pll_ref, pll_in, sclk_audio, and sclk_pcm_in for the AudioSS clock controller. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-01-03Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-6/+5
Pull kvm bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: Unconditionally uninit the MMU on nested vmexit KVM: x86: Fix APIC map calculation after re-enabling
2014-01-03Merge branch 'akpm' (incoming from Andrew)Linus Torvalds1-0/+5
Merge patches from Andrew Morton: "Ten fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: epoll: do not take the nested ep->mtx on EPOLL_CTL_DEL sh: add EXPORT_SYMBOL(min_low_pfn) and EXPORT_SYMBOL(max_low_pfn) to sh_ksyms_32.c drivers/dma/ioat/dma.c: check DMA mapping error in ioat_dma_self_test() mm/memory-failure.c: transfer page count from head page to tail page after split thp MAINTAINERS: set up proper record for Xilinx Zynq mm: remove bogus warning in copy_huge_pmd() memcg: fix memcg_size() calculation mm: fix use-after-free in sys_remap_file_pages mm: munlock: fix deadlock in __munlock_pagevec() mm: munlock: fix a bug where THP tail page is encountered
2014-01-03sh: add EXPORT_SYMBOL(min_low_pfn) and EXPORT_SYMBOL(max_low_pfn) to ↵Nobuhiro Iwamatsu1-0/+5
sh_ksyms_32.c Min_low_pfn and max_low_pfn were used in pfn_valid macro if defined CONFIG_FLATMEM. When the functions that use the pfn_valid is used in driver module, max_low_pfn and min_low_pfn is to undefined, and fail to build. ERROR: "min_low_pfn" [drivers/block/aoe/aoe.ko] undefined! ERROR: "max_low_pfn" [drivers/block/aoe/aoe.ko] undefined! make[2]: *** [__modpost] Error 1 make[1]: *** [modules] Error 2 This patch fix this problem. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-03Merge branch 'for-linus' of ↵Linus Torvalds5-10/+21
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Two small bug fixes and a follow-up to the CONFIG_NR_CPUS change. A kernel compiled with CONFIG_NR_CPUS=256 will waste quite a bit of memory for the per-cpu arrays. Under z/VM the maximum number of CPUs is 64, the code now limits the possible cpu mask to 64 if running under z/VM" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: obtain function handle in hotplug notifier s390/3270: fix allocation of tty3270_screen structure s390/smp: improve setup of possible cpu mask
2014-01-02KVM: nVMX: Unconditionally uninit the MMU on nested vmexitJan Kiszka1-2/+1
Three reasons for doing this: 1. arch.walk_mmu points to arch.mmu anyway in case nested EPT wasn't in use. 2. this aligns VMX with SVM. But 3. is most important: nested_cpu_has_ept(vmcs12) queries the VMCS page, and if one guest VCPU manipulates the page of another VCPU in L2, we may be fooled to skip over the nested_ept_uninit_mmu_context, leaving mmu in nested state. That can crash the host later on if nested_ept_get_cr3 is invoked while L1 already left vmxon and nested.current_vmcs12 became NULL therefore. Cc: stable@kernel.org Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-12-31KVM: x86: Fix APIC map calculation after re-enablingJan Kiszka1-4/+4
Update arch.apic_base before triggering recalculate_apic_map. Otherwise the recalculation will work against the previous state of the APIC and will fail to build the correct map when an APIC is hardware-enabled again. This fixes a regression of 1e08ec4a13. Cc: stable@vger.kernel.org Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-12-30Merge branch 'merge' of ↵Linus Torvalds7-34/+60
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "A bit more endian problems found during testing of 3.13 and a few other simple fixes and regressions fixes" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix alignment of secondary cpu spin vars powerpc: Align p_end powernv/eeh: Add buffer for P7IOC hub error data powernv/eeh: Fix possible buffer overrun in ioda_eeh_phb_diag() powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endian powerpc: Make unaligned accesses endian-safe for powerpc powerpc: Fix bad stack check in exception entry powerpc/512x: dts: disable MPC5125 usb module powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node (5125)
2013-12-30ARM: dts: exynos5250: Fix MDMA0 clock numberAbhilash Kesavan1-1/+1
Due to incorrect clock specified in MDMA0 node, using MDMA0 controller could cause system failures, due to wrong clock being controlled. This patch fixes this by specifying correct clock. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> [t.figa: Corrected commit message and description.] Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2013-12-30s390/pci: obtain function handle in hotplug notifierSebastian Ott1-0/+2
When using the CLP interface to enable or disable a pci device a valid function handle needs to be delivered. So far our assumption was that we always have an up-to-date version of the function handle (since it doesn't change when the device is in use). This assumption is incorrect if the pci device is enabled or disabled outside of our control. When we are notified about such a change we already receive the new function handle. Just use it. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-30Merge remote-tracking branch 'agust/merge' into mergeBenjamin Herrenschmidt1-1/+5
Anatolij writes: Please pull two DTS fixes for MPC5125 tower board. Without them the v3.13-rcX kernels do not boot.
2013-12-30powerpc: Fix alignment of secondary cpu spin varsOlof Johansson1-0/+1
Commit 5c0484e25ec0 ('powerpc: Endian safe trampoline') resulted in losing proper alignment of the spinlock variables used when booting secondary CPUs, causing some quite odd issues with failing to boot on PA Semi-based systems. This showed itself on ppc64_defconfig, but not on pasemi_defconfig, so it had gone unnoticed when I initially tested the LE patch set. Fix is to add explicit alignment instead of relying on good luck. :) [ It appears that there is a different issue with PA Semi systems however this fix is definitely correct so applying anyway -- BenH ] Fixes: 5c0484e25ec0 ('powerpc: Endian safe trampoline') Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=67811 Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30powerpc: Align p_endAnton Blanchard1-0/+1
p_end is an 8 byte value embedded in the text section. This means it is only 4 byte aligned when it should be 8 byte aligned. Fix this by adding an explicit alignment. This fixes an issue where POWER7 little endian builds with CONFIG_RELOCATABLE=y fail to boot. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30powernv/eeh: Add buffer for P7IOC hub error dataBrian W Hart2-14/+5
Prevent ioda_eeh_hub_diag() from clobbering itself when called by supplying a per-PHB buffer for P7IOC hub diagnostic data. Take care to inform OPAL of the correct size for the buffer. [Small style change to the use of sizeof -- BenH] Signed-off-by: Brian W Hart <hartb@linux.vnet.ibm.com> Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30powernv/eeh: Fix possible buffer overrun in ioda_eeh_phb_diag()Brian W Hart1-2/+3
PHB diagnostic buffer may be smaller than PAGE_SIZE, especially when PAGE_SIZE > 4KB. Signed-off-by: Brian W Hart <hartb@linux.vnet.ibm.com> Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endianPaul E. McKenney1-15/+38
The powerpc 64-bit __copy_tofrom_user() function uses shifts to handle unaligned invocations. However, these shifts were designed for big-endian systems: On little-endian systems, they must shift in the opposite direction. This commit relies on the C preprocessor to insert the correct shifts into the assembly code. [ This is a rare but nasty LE issue. Most of the time we use the POWER7 optimised __copy_tofrom_user_power7 loop, but when it hits an exception we fall back to the base __copy_tofrom_user loop. - Anton ] Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30powerpc: Make unaligned accesses endian-safe for powerpcRajesh B Prathipati1-1/+6
The generic put_unaligned/get_unaligned macros were made endian-safe by calling the appropriate endian dependent macros based on the endian type of the powerpc processor. Signed-off-by: Rajesh B Prathipati <rprathip@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30powerpc: Fix bad stack check in exception entryMichael Neuling1-1/+1
In EXCEPTION_PROLOG_COMMON() we check to see if the stack pointer (r1) is valid when coming from the kernel. If it's not valid, we die but with a nice oops message. Currently we allocate a stack frame (subtract INT_FRAME_SIZE) before we check to see if the stack pointer is negative. Unfortunately, this won't detect a bad stack where r1 is less than INT_FRAME_SIZE. This patch fixes the check to compare the modified r1 with -INT_FRAME_SIZE. With this, bad kernel stack pointers (including NULL pointers) are correctly detected again. Kudos to Paulus for finding this. Signed-off-by: Michael Neuling <mikey@neuling.org> cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30Merge tag 'fixes-for-linus' of ↵Linus Torvalds8-10/+24
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another smallish batch of fixes, it's been quiet due to the holidays. Nothing controversial here, a handful of things across the board" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: pxa: fix USB gadget driver compilation regression ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL ARM: shmobile: r8a7790: fix shdi resource sizes ARM: shmobile: bockw: fixup DMA mask ARM: shmobile: armadillo: Add PWM backlight power supply
2013-12-30Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "There is a small EFI fix and a big power regression fix in this batch. My queue also had a fix for downing a CPU when there are insufficient number of IRQ vectors available, but I'm holding that one for now due to recent bug reports" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Don't select EFI from certain special ACPI drivers x86 idle: Repair large-server 50-watt idle-power regression
2013-12-29Merge tag 'omap-for-v3.13/intc-ldp-fix' of ↵Olof Johansson39-169/+269
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Fix a regression for wrong interrupt numbers for some devices after the sparse IRQ conversion, fix DRA7 console output for earlyprintk, and fix the LDP LCD backlight when DSS is built into the kernel and not as a loadable module. * tag 'omap-for-v3.13/intc-ldp-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL + v3.13-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-29Merge tag 'renesas-fixes2-for-v3.13' of ↵Olof Johansson3-3/+10
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman: Second Round of Renesas ARM based SoC Fixes for v3.13 * r8a7790 (R-Car H2) based Lager board - Correct SHDI resource sizes This bug has been present since sdhi resources were added to the r8a7790 by 8c9b1aa41853272a ("ARM: shmobile: r8a7790: add MMCIF and SDHI DT templates") in v3.11-rc2. * r8a7778 (R-Car M1) based Bock-W board - Correct DMA mask This resolves a regression introduced by 4dcfa60071b3d23f ("ARM: DMA-API: better handing of DMA masks for coherent allocations") in v3.12-rc1. * r8a7740 (R-Mobile A1) based Armadillo board - Add PWM backlight power supply This resolves a regression introduced by 22ceeee16eb8f0d0 ("pwm-backlight: Add power supply support") in v3.12. * tag 'renesas-fixes2-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7790: fix shdi resource sizes ARM: shmobile: bockw: fixup DMA mask ARM: shmobile: armadillo: Add PWM backlight power supply Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-29ARM: pxa: fix USB gadget driver compilation regressionLinus Walleij1-0/+2
After commit 88f718e3fa4d67f3a8dbe79a2f97d722323e4051 "ARM: pxa: delete the custom GPIO header" a compilation error was introduced in the PXA25x gadget driver. An attempt to fix the problem was made in commit b144e4ab1ef130e8bf30bcd3e529b7f35112c503 "usb: gadget: fix pxa25x compilation problems" by explictly stating the driver needs the <mach/hardware.h> header, which solved the compilation for a few boards, such as the pxa255-idp and its defconfig. However the Lubbock board has this special clause in drivers/usb/gadget/pxa25x_udc.c: This include file has an implicit dependency on <mach/irqs.h> having been included before <mach/lubbock.h> was included. Before commit 88f718e3fa4d67f3a8dbe79a2f97d722323e4051 "ARM: pxa: delete the custom GPIO header" this implicit dependency for the pxa25x_udc compile on the Lubbock was satisfied by <linux/gpio.h> implicitly including <mach/gpio.h> which was in turn including <mach/irqs.h>, apart from the earlier added <mach/hardware.h>. Fix this by having the PXA25x <mach/lubbock.h> explicitly include <mach/irqs.h>. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Greg Kroah-Hartmann <gregkh@linuxfoundation.org> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-27Merge tag 'for-v3.13-rc/hwmod-fixes-b' of ↵Tony Lindgren3-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into debug-ll-and-ldp-backlight-fix A few OMAP hwmod fixes for v3.13-rc. One patch fixes some IRQ problems with GPMC, RNG, and ISP/IVA MMUs on OMAP2/3. The other fixes some problems with DEBUG_LL on DRA7xx. Basic build, boot, and PM test logs are available here: http://www.pwsan.com/omap/testlogs/hwmod_fixes_b_v3.13-rc/20131226021920/
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 19:59:51 +0300